Section/division AIRWORTHINESS Form Number: CA 145-19aTelephone number: 011-545-1000 Fax Number: 011-545-1461Physical address Ikhaya Lokundiza, 16 Treur Close, Waterfall Park, Bekker Street, Midrand, GautengPostal address: Private Bag X73, Halfway House 1685 Website: www.caa.co.za

OPERATIONS SPECIFICATIONS FOR AIRCRAFT MAINTENANCE ORGANISATIONS

Name of Organisation

CA 145-19a 10 JULY 2009 Page 1 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

Approval Number

PART A TABLE OF CONTENTS, LIST OF EFFECTIVE PAGES, AND RATINGS AUTHORITY

Table of Contents List of effective Pages

Authorized UnauthorizedTable of Contents, LEP’s & Rating authority Page 1

Definitions and abbreviations Page 2Category A-Ratings Page 3

CA 145-19a 10 JULY 2009 Page 2 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

Category B-Ratings Page 4Category C-Ratings Page 5Category D-Ratings Page 6Category E-Ratings Page 7Category W-Ratings Page 8Category X-Ratings Page 9Special Processes Page 10Exemption and deviation Authority Page 11Satellite Facilities & Line station Ratings

Page 12

CA 145-19a 10 JULY 2009 Page 3 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

a These specific operating provisions are issued as part of this Approved Maintenance Organisation Certificate, and are in effect as of the Effective Date.

b The signatures below indicates acceptance of these provisions by the AMO, and confirmation to abide and comply with the limitations imposed by them. The Commissioner of Civil Aviation of South Africa reserves the right to amend, revoke and alter these Specification at any given time should circumstances warrant such.

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 4 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLE

PART B Definitions and AbbreviationsCA 145-19a 10 JULY 2009 Page 5 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

Unless otherwise defined in these operation specifications provisions, all words, phrases, definitions, and abbreviations have identical meanings to those used in the South African Civil Aviation Regulations and South African Civil Aviation Act, as amended. Additionally, the definitions listed below are applicable to operations conducted in accordance with these operations specifications provisions.AMO Aircraft Maintenance OrganisationCAA Civil Aviation AuthorityCAR Civil Aviation RegulationsMOP Manual of ProcedureCertificate Holder In these operation specifications provisions the term “certificate holder” shall mean the holder of

CA 145-19a 10 JULY 2009 Page 6 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

an aircraft maintenance organisation certificate, issued in terms of Part 145 of the South African Civil Aviation Regulations of 1997 as amended.

Rating Means an authorization entered on or associated with an AMO approval and forming part of such approval, stating special conditions, privileges or limitations relating to such approval. Privileges are defined in CAR 145.

Maintenance Means all work done in accordance with manufacturers’ recommendations and approved maintenance schedules and include inspection, adjustment, replacement, rectification, repair, modification, overhaul, manufacturing and testing.

Category Classification of aircraft maintenance activities into airframe maintenance (Cat ‘A), Airframe components, equipment and accessories maintenance (Cat ‘B’), engines onwing maintenance (Cat. ‘C’), engine/components overhaul (Cat ‘D’), Maintenance on rotorcraft and their engines (Cat ‘E’), aircraft avionic installations (Cat ‘W’ class 1, 2 & 3), avionic equipment overhaul (Cat.

CA 145-19a 10 JULY 2009 Page 7 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

‘X’, class 1, 2 & 3), propeller (class X4), and welding processes (class X5).Deviation Authority An authorisation that permits an alternate means of compliance with CAR. The deviation

authority must meet the procedural requirements of SACAR Part 11.Limitation A restriction imposed on the corresponding rating based on the AMO capability.

Capability ListA document compiled by the AMO and approved by the SACAA, which details a comprehensive list of all the components/equipment that the AMO is capable of maintaining.

Note: This list is mandatory for category ‘B’, ‘D’ and ‘X’, unless such list of components and repair limitations can be accommodated in the space provided.

Special processes A set of interrelated or interacting activities which transforms inputs into outputs.

Examples are: NDT, Electro Plating, Plasma Spraying, etc.

CA 145-19a 10 JULY 2009 Page 8 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

Satellite Facility means any facility used for the performance of maintenance under part 145 approval but is located at another location than the principal place of business (main base) but is an integral part of the organization

Line StationFor the purpose of this document, means any maintenance facility that is utilized to perform any action that is mandatory, or is required to be performed on an aircraft for the purposes of a turn around, or a route check, or a transit check and is limited to defects rectification repairable by replacement of line replaceable units.

Group Means classes of aircraft, engines and items of equipment as defined in SA-CATS-AMO 145.01.7.

CA 145-19a 10 JULY 2009 Page 9 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

PART C CATEGORY A - RATINGS

CA 145-19a 10 JULY 2009 Page 10 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

GROUP MANUFACTURER MAKE/MODEL LIMITATIONS

CA 145-19a 10 JULY 2009 Page 11 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

SIGNATURE OF NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 12 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

AMO REPRESENTATIVEJOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

SIGNATURE OFSM: AIRWORTHINESS OR

NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 13 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

DESIGNATE

CA 145-19a 10 JULY 2009 Page 14 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

PART D CATEGORY B - RATINGS

GROUP MANUFACTURER MAKE/MODEL LIMITATIONS CAPABILITY LIST

CA 145-19a 10 JULY 2009 Page 15 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 16 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 17 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

CA 145-19a 10 JULY 2009 Page 18 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFSM: AIRWORTHINESS OR

DESIGNATENAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 19 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

PART E CATEGORY C - RATINGS

GROUP MANUFACTURER MAKE/MODEL LIMITATIONS

CA 145-19a 10 JULY 2009 Page 20 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 21 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 22 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

SIGNATURE OF NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 23 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SM: AIRWORTHINESS

PART F CATEGORY D - RATINGS

CA 145-19a 10 JULY 2009 Page 24 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

GROUP MANUFACTURER MAKE/MODEL LIMITATIONS CAPABILITY LIST

CA 145-19a 10 JULY 2009 Page 25 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 26 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 27 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

CA 145-19a 10 JULY 2009 Page 28 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFSM: AIRWORTHINESS NAME IN BLOCK LETTERS DATE

PART G CATEGORY E - RATINGS

GROUP MANUFACTURER MAKE/MODEL LIMITATIONS

CA 145-19a 10 JULY 2009 Page 29 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 30 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 31 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

SIGNATURE OF NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 32 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

AMO REPRESENTATIVEJOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

SIGNATURE OFSM: AIRWORTHINESS OR

NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 33 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

DESIGNATE

PART H CATEGORY W – RATINGS

CLASS MANUFACTURER MAKE/MODEL LIMITATIONS

CA 145-19a 10 JULY 2009 Page 34 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 35 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 36 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Original

CA 145-19a 10 JULY 2009 Page 37 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

y y y y m m d d

SIGNATURE OFSM: AIRWORTHINESS OR

DESIGNATENAME IN BLOCK LETTERS DATE

PART I CATEGORY X – RATINGS

CA 145-19a 10 JULY 2009 Page 38 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CLASS MANUFACTURER MAKE/MODEL LIMITATIONS CAPABILITY LIST

CA 145-19a 10 JULY 2009 Page 39 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 40 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 41 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

CA 145-19a 10 JULY 2009 Page 42 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFSM: AIRWORTHINESS OR DESIGNATE NAME IN BLOCK LETTERS DATE

PART J SPECIAL PROCESSES

PROCESS DESCRIPTION REFERENCE STANDARD LIMITATIONS

CA 145-19a 10 JULY 2009 Page 43 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 44 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 45 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 46 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Original

y y y y m m d d

SIGNATURE OFSM: AIRWORTHINESS NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 47 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

PART K EXEMPTION & DEVIATION AUTHORITY

The certificate holder is authorised to perform operations in accordance with the provisions, conditions, and/or limitations set forth in the following deviations listed in the table below.

DEVIATION REFERENCE DATE OF DEVIATION DATE OF TERMINATION REMARKS/REFERENCE

CA 145-19a 10 JULY 2009 Page 48 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 49 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 50 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Originaly y y y m m d d

CA 145-19a 10 JULY 2009 Page 51 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OF SM: AIRWORTHINESS OR DESIGNATE NAME IN BLOCK LETTERS DATE

PART L SATELLITE FACILITIES & LINE STATION RATINGS

CA 145-19a 10 JULY 2009 Page 52 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

PHYSICAL LOCATION(Address)

GROUP /CLASS MANUFACTURER MAKE/MODEL LIMITATIONS EXPIRY DATE

As per Approval Certificates

CA 145-19a 10 JULY 2009 Page 53 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

CA 145-19a 10 JULY 2009 Page 54 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

I hereby accept the conditions and limitations set forth in this approval as stated and contained in this paragraph.

CA 145-19a 10 JULY 2009 Page 55 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SIGNATURE OFAMO REPRESENTATIVE NAME IN BLOCK LETTERS DATE

JOB TITLEI hereby approve the Operations Specifications contained in this paragraph.

Date approval is effective: Revision Number: Original

y y y y m m d d

SIGNATURE OF NAME IN BLOCK LETTERS DATE

CA 145-19a 10 JULY 2009 Page 56 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5

SM: AIRWORTHINESS OR DESIGNATE

CA 145-19a 10 JULY 2009 Page 57 of 57

APPENDIX 6 - CERTIFICATION PROCESS FLOW

CHART.Page 2 of 5