captive screws - springfix linkages · 2015. 2. 10. · (qq-n-290a) nickel is a corrosion...

Captive Screws

Captive Screws

Tel: 01483 26 67 76 web: mechanicalcomponents.co.uk Fax: 01483 26 67 75 a website from Automotion Components

Technical InformationCoatings and Drive Types

106

Captive Screw

s from A

utomotion C

omponents

Automotion produce a wide range of fasteners designed for application where it is important that fasteners are not separated from equipment (e.g. cover panels etc). This is now important to ensure that equipment complies with Machinery Directive 200642/EC - requiring that fasteners remain attached to fi xed guards or equipment when guards are removed.Our captive panel screws are manufactured mainly from stainless steel (A2, AISI 303 grade), but they can also be produced in stainless steel (A4, AISI 316), aluminium, brass or zinc-plated steel.Many fi nishes can be applied - black-oxide fi nish, anodizing etc.The main options are as follows:

The available head sockets include:

Finish Notes

Black Chrome (MIL-C-1458B)

Black chrome is a hard, non-refl ective coating which is resistant to abrasion, heat and corrosion. The black chrome surface is a dull, dark

grey and may be waxed or oiled to darken surface.

Black Oxide Coating(MIL-C-13924B)

Black oxide is a uniform black coating for ferrous metals. Generally it is considered a decorative coating and provides only very limited corrosion

protection under mild corrosion conditions.

CadmiumCadmium is a bright, silvery white plating. Supplementary treatments for

Type II can be golden, iridescent, amber, black or olive drab.

Passivate(QQ-P-35/MIL S-500SC)

Passivation is a process designed to remove foreign metals from the surface of stainless and corrosion resistant steels.

Phosphate Coating Light(TT-C-00490B)

Phosphate coating is a light coating for use as a base paint.

Gold(MIL-G-45204B)

Yellow to orange colour depending on proprietary process used. Will range from matt to bright fi nish depending on base metal.

Good corrosion resistance and high tarnish resistance.

Nickel(QQ-N-290A)

Nickel is a corrosion protective plating for steel, zinc and zinc alloys as well as copper and copper alloys.

Zinc(QQ-Z-325C)

The primary use of chromate fi nishes on zinc is to retard or prevent formation of white corrosion products on zinc surfaces.

Schematic Drive Types Uses

Hexagonal RecessIdeal for precision assembly. Most recommended where less

surface area is available.

Crosshead

(Phillips®)

Provides good control in driving. Always use a driver bit of the proper size which is in good condition.

Star Head

(Torx®)

Positive-engaging, fast-locating method which transmits drive torque with less required downward pressure. Good fastening

appearance.

SlottedAccepts standard blade screwdriver. Requires less downward pressure to drive parts than those with recessed openings.

Use a proper fi tting blade to minimize slippage.

SecurityThese screws are impossible to remove without the special

matching screw driver.

Captive Screws


Captive ScrewsOrdering Options

107

Captive Screw

s from A

utomotion C

omponents

P0151Button Head - HexSecurity and Torx Options

P0154Socket Head - Cap ScrewSecurity and Torx Options

P0158Hexagon Head Bolt

P0159Captive Panel Screw

P0160Thin Head Thumb Screws

P0161Thumb Screws

Automotion provides a wide range of captive screws to aid customers to comply with the Machinery Directive 2006/42/EC.In general there is a requirement that fi xings for fi xed guards shall remain attached to the guard or machinery when the guard is removed. This was implemented mainly to ensure that as far as possible fasteners are not lost when the guard is removed and the guard is therefore re-installed with all required fi xings.

A wide range of captive screws and thumb screws are provided...

InstallationTo work effectively the captive screw when installed needs to have a space or counterbore between the thread and cover at least equal to the length of the thread.

Structure

Panel

Gap or counterbore equal to length of screw thread

Captive Screws

Tel: 0845 850 99 40 Email: [email protected] Fax: 0845 850 99 41 Web: automotioncomponents.co.uk

Technical InformationAssembly Options

The captive screws are provided individually or as part of an assemby - usually involving a split washer and a captive washer.In addition we have fl anged assembly options where a fl ange can be permanently mounted to a thin panel and is the swaged onto the panel.

108web: mechanicalcomponents.co.uk

a website from Automotion ComponentsTel: 01483 26 67 76Fax: 01483 26 67 75

Captive Screws - Pan Headphillips drive

Captive Screws

MaterialStainless steel (A2-70, AISI 303).Also available on request in steel (anodised, black oxide or zinc plated) stainless steel (A4, AISI 316), brass, aluminium etc.

Technical NotesGenerally to DIN 7895 H.Often used with our captive washer (P0168) or retaining flanges (P0169 - for sheet metal applications).

TipsOther head drive styles - add suffix:-TX for Torx (hexalobular).-PZ for Pozidrive.-SE for snake-eye security.

P0150.A2 l1

l2h1

d1d3

d2

h2

Suggested Installation

t = min depthcounterbore

> length threadedportion l2

t

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.h max. h2

Drive #

P0150.025-008-A2 M2,5 8 1,7 3,7 5,0 2,1 0,7 1P0150.025-010-A2 M2,5 10 1,7 3,7 5,0 2,1 0,7 1P0150.025-012-A2 M2,5 12 1,7 3,7 5,0 2,1 0,7 1P0150.025-016-A2 M2,5 16 1,7 3,7 5,0 2,1 0,7 1P0150.025-020-A2 M2,5 20 1,7 3,7 5,0 2,1 0,7 1

P0150.030-010-A2 M3 10 2,0 4,5 5,6 2,4 0,74 1P0150.030-016-A2 M 3 16 2,0 4,5 5,6 2,4 0,74 1P0150.030-020-A2 M 3 20 2,0 4,5 5,6 2,4 0,74 1P0150.030-025-A2 M 3 25 2,0 4,5 5,6 2,4 0,74 1P0150.030-030-A2 M 3 30 2,0 4,5 5,6 2,4 0,74 1P0150.030-040-A2 M 3 40 2,0 4,5 5,6 2,4 0,74 1

P0150.040-012-A2 M 4 12 2,8 6,0 8,0 3,1 0,93 2P0150.040-016-A2 M 4 16 2,8 6,0 8,0 3,1 0,93 2P0150.040-020-A2 M 4 20 2,8 6,0 8,0 3,1 0,93 2P0150.040-030-A2 M 4 30 2,8 6,0 8,0 3,1 0,93 2P0150.040-040-A2 M 4 40 2,8 6,0 8,0 3,1 0,93 2P0150.040-050-A2 M 4 50 2,8 6,0 8,0 3,1 0,93 2

P0150.040-060-A2 M 4 60 2,8 6,0 8,0 3,1 0,93 2

P0150.050-012-A2 M 5 12 3,7 7,5 9,5 3,7 1,0 2P0150.050-016-A2 M 5 16 3,7 7,5 9,5 3,7 1,0 2P0150.050-020-A2 M 5 20 3,7 7,5 9,5 3,7 1,0 2P0150.050-030-A2 M 5 30 3,7 7,5 9,5 3,7 1,0 2P0150.050-040-A2 M 5 40 3,7 7,5 9,5 3,7 1,0 2P0150.050-050-A2 M 5 50 3,7 7,5 9,5 3,7 1,0 2P0150.050-060-A2 M 5 60 3,7 7,5 9,5 3,7 1,0 2

P0150.060-012-A2 M 6 12 4,2 7,5 12,0 4,7 1,14 3P0150.060-016-A2 M 6 16 4,2 7,5 12,0 4,7 1,14 3P0150.060-020-A2 M 6 20 4,2 7,5 12,0 4,7 1,14 3P0150.060-030-A2 M 6 30 4,2 7,5 12,0 4,7 1,14 3P0150.060-040-A2 M 6 40 4,2 7,5 12,0 4,7 1,14 3P0150.060-050-A2 M 6 50 4,2 7,5 12,0 4,7 1,14 3P0150.060-060-A2 M 6 60 4,2 7,5 12,0 4,7 1,14 3P0150.060-080-A2 M 6 80 4,2 7,5 12,0 4,7 1,14 3

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.h max. h2

Drive #

109Tel: 01483 26 67 76Fax: 01483 26 67 75

web: mechanicalcomponents.co.uka website from Automotion Components

Captive Screws - Button Headhex. socket

Captive Screws


Technical NotesGenerally to ISO 7380.Often used with our captive washer (P0168) or retaining flanges (P0169 - for sheet metal applications).


P0151.A2l1

l2h

d1d3

d2




t

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.

h1

max.w2 A/F

P0151.025-008-A2 M2,5 8 1,7 3,7 3,5 2,1 0,7 1,5P0151.025-010-A2 M2,5 10 1,7 3,7 3,5 2,1 0,7 1,5P0151.025-012-A2 M2,5 12 1,7 3,7 3,5 2,1 0,7 1,5P0151.025-016-A2 M2,5 16 1,7 3,7 3,5 2,1 0,7 1,5P0151.025-020-A2 M2,5 20 1,7 3,7 3,5 2,1 0,7 1,5

P0151.030-010-A2 M3 10 2,0 4,5 5,7 2,4 0,74 2P0151.030-016-A2 M3 16 2,0 4,5 5,7 2,4 0,74 2P0151.030-020-A2 M3 20 2,0 4,5 5,7 2,4 0,74 2P0151.030-025-A2 M3 25 2,0 4,5 5,7 2,4 0,74 2P0151.030-030-A2 M3 30 2,0 4,5 5,7 2,4 0,74 2P0151.030-040-A2 M3 40 2,0 5,0 5,7 2,4 0,74 2

P0151.040-012-A2 M4 12 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-016-A2 M4 16 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-020-A2 M4 20 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-025-A2 M4 25 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-030-A2 M4 30 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-040-A2 M4 40 2,8 6,0 7,6 3,1 0,93 2,5P0151.040-050-A2 M4 50 2,8 6,0 7,6 3,1 0,93 2,5

P0151.040-060-A2 M4 60 2,8 6,0 7,6 3,1 0,93 2,5

P0151.050-012-A2 M5 12 3,7 7,5 9,5 3,7 1,0 3P0151.050-016-A2 M5 16 3,7 7,5 9,5 3,7 1,0 3P0151.050-020-A2 M5 20 3,7 7,5 9,5 3,7 1,0 3P0151.050-025-A2 M5 25 3,7 7,5 9,5 3,7 1,0 3P0151.050-030-A2 M5 30 3,7 7,5 9,5 3,7 1,0 3P0151.050-040-A2 M5 40 3,7 7,5 9,5 3,7 1,0 3P0151.050-050-A2 M5 50 3,7 7,5 9,5 3,7 1,0 3P0151.050-060-A2 M5 60 3,7 7,5 9,5 3,7 1,0 3

P0151.060-016-A2 M6 16 4,2 7,5 10,5 4,7 1,14 4P0151.060-020-A2 M6 20 4,2 7,5 10,5 4,7 1,14 4P0151.060-025-A2 M6 25 4,2 7,5 10,5 4,7 1,14 4P0151.060-030-A2 M6 30 4,2 7,5 10,5 4,7 1,14 4P0151.060-040-A2 M6 40 4,2 7,5 10,5 4,7 1,14 4P0151.060-050-A2 M6 50 4,2 7,5 10,5 4,7 1,14 4P0151.060-060-A2 M6 60 4,2 7,5 10,5 4,7 1,14 4P0151.060-080-A2 M6 80 4,2 7,5 10,5 4,7 1,14 4

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.

h1

max.w2 A/F



Captive Screws - Cheese HeadCaptive Screws


Technical NotesGenerally to DIN 84.Often used with our captive washer (P0168) or retaining flanges (P0169 - for sheet metal applications).


P0152.A2

l1

l2h1

h2

d1d3

d2


A/F

t



Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3 h1 h2 A/F

P0152.020-010-A2 M 2 10 1,2 3,0 3,8 1,3 0,85 1,3P0152.020-012-A2 M 2 12 1,2 3,0 3,8 1,3 0,85 1,3P0152.020-016-A2 M 2 16 1,2 3,0 3,8 1,3 0,85 1,3P0152.020-020-A2 M 2 20 1,2 3,0 3,8 1,3 0,85 1,3

P0152.025-010-A2 M2,5 10 1,7 3,7 4,5 1,6 1,00 1,5P0152.025-016-A2 M2,5 12 1,7 3,7 4,5 1,6 1,00 1,5P0152.025-020-A2 M2,5 16 1,7 3,7 4,5 1,6 1,00 1,5P0152.025-025-A2 M2,5 20 1,7 3,7 4,5 1,6 1,00 1,5P0152.025-030-A2 M2,5 20 1,7 3,7 4,5 1,6 1,00 1,5

P0152.030-010-A2 M 3 10 2,0 4,5 5,5 2,0 1,30 2P0152.030-011-A2 M 3 11 2,0 4,5 5,5 2,0 1,30 2P0152.030-013-A2 M 3 13 2,0 4,5 5,5 2,0 1,30 2P0152.030-016-A2 M 3 16 2,0 3,7 5,5 2,0 1,30 2P0152.030-018-A2 M 3 18 2,0 3,7 5,5 2,0 1,30 2P0152.030-016-A2 M 3 16 2,0 3,7 5,5 2,0 1,30 2P0152.030-020-A2 M 3 20 2,0 3,7 5,5 2,0 1,30 2P0152.030-025-A2 M 3 25 2,0 3,7 5,5 2,0 1,30 2P0152.030-030-A2 M 3 30 2,0 3,7 5,5 2,0 1,30 2P0152.030-040-A2 M 3 40 2,0 3,7 5,5 2,0 1,30 2

P0152.035-010-A2 M3,5 10 2,3 5,2 6,0 2,4 1,4 2,5P0152.035-016-A2 M3,5 16 2,3 5,2 6,0 2,4 1,4 2,5P0152.035-020-A2 M3,5 20 2,3 5,2 6,0 2,4 1,4 2,5P0152.035-025-A2 M3,5 25 2,3 5,2 6,0 2,4 1,4 2,5P0152.035-030-A2 M3,5 30 2,3 5,2 6,0 2,4 1,4 2,5P0152.035-040-A2 M3,5 40 2,3 5,2 6,0 2,4 1,4 2,5

P0152.040-012-A2 M 4 12 2,8 6,0 7,0 2,6 1,6 2,5

P0152.040-016-A2 M 4 16 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-018-A2 M 4 18 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-019-A2 M 4 19 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-020-A2 M 4 20 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-025-A2 M 4 25 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-030-A2 M 4 30 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-040-A2 M 4 40 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-050-A2 M 4 50 2,8 6,0 7,0 2,6 1,6 2,5P0152.040-060-A2 M 4 60 2,8 6,0 7,0 2,6 1,6 2,5

P0152.050-012-A2 M 5 12 3,7 7,5 8,5 3,3 2,0 3P0152.050-016-A2 M 5 16 3,7 7,5 8,5 3,3 2,0 3P0152.050-018-A2 M 5 18 3,7 7,5 8,5 3,3 2,0 3P0152.050-020-A2 M 5 20 3,7 7,5 8,5 3,3 2,0 3P0152.050-022-A2 M 5 22 3,7 7,5 8,5 3,3 2,0 3P0152.050-025-A2 M 5 25 3,7 7,5 8,5 3,3 2,0 3P0152.050-030-A2 M 5 30 3,7 7,5 8,5 3,3 2,0 3P0152.050-040-A2 M 5 40 3,7 7,5 8,5 3,3 2,0 3P0152.050-050-A2 M 5 50 3,7 7,5 8,5 3,3 2,0 3P0152.050-060-A2 M 5 60 3,7 7,5 8,5 3,3 2,0 3P0152.050-080-A2 M 5 80 3,7 7,5 8,5 3,3 2,0 3

P0152.060-016-A2 M 6 16 4,2 7,5 10,0 3,9 2,3 4P0152.060-020-A2 M 6 20 4,2 7,5 10,0 3,9 2,3 4P0152.060-025-A2 M 6 25 4,2 7,5 10,0 3,9 2,3 4P0152.060-030-A2 M 6 30 4,2 7,5 10,0 3,9 2,3 4P0152.060-040-A2 M 6 40 4,2 7,5 10,0 3,9 2,3 4P0152.060-050-A2 M 6 50 4,2 7,5 10,0 3,9 2,3 4P0152.060-060-A2 M 6 60 4,2 7,5 10,0 3,9 2,3 4P0152.060-080-A2 M 6 80 4,2 7,5 10,0 3,9 2,3 4

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3 h1 h2 A/F

111Tel: 01483 26 67 76Fax: 01483 26 67 75


Captive Screws - Countersunkhex. socket

Captive Screws



TipsOther head drive styles - add suffix:-PH for Phillips-TX for Torx (hexalobular).-PZ for Pozidrive.-SE for snake-eye security.

P0153.A290°

l1

l2th

suggested installation

t=min depth counterbore> length threaded portion l2

d1d3

d2

A/F

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.

hmax.

A/F

P0153.020-010-A2 M2 10 1,2 3,5 3,8 1,2 1,3P0153.020-012-A2 M2 12 1,2 3,5 3,8 1,2 1,3P0153.020-016-A2 M2 16 1,2 3,5 3,8 1,2 1,3P0153.020-020-A2 M2 20 1,2 3,5 3,8 1,2 1,3

P0153.025-010-A2 M2,5 10 1,7 3,7 4,7 1,5 1,5P0153.025-012-A2 M2,5 12 1,7 3,7 4,7 1,5 1,5P0153.025-016-A2 M2,5 16 1,7 3,7 4,7 1,5 1,5P0153.025-020-A2 M2,5 20 1,7 3,7 4,7 1,5 1,5

P0153.030-010-A2 M3 10 2,0 4,5 5,6 1,65 2P0153.030-016-A2 M3 16 2,0 4,5 5,6 1,65 2P0153.030-020-A2 M3 20 2,0 4,5 5,6 1,65 2P0153.030-025-A2 M3 25 2,0 4,5 5,6 1,65 2P0153.030-030-A2 M3 30 2,0 4,5 5,6 1,65 2P0153.030-040-A2 M3 40 2,0 4,5 5,6 1,65 2

P0153.040-012-A2 M4 12 2,8 6,0 7,5 2,2 2,5P0153.040-016-A2 M4 16 2,8 6,0 7,5 2,2 2,5P0153.040-020-A2 M4 20 2,8 6,0 7,5 2,2 2,5P0153.040-025-A2 M4 25 2,8 6,0 7,5 2,2 2,5P0153.040-030-A2 M4 30 2,8 6,0 7,5 2,2 2,5

P0153.040-040-A2 M4 40 2,8 6,0 7,5 2,2 2,5P0153.040-050-A2 M4 50 2,8 6,0 7,5 2,2 2,5P0153.040-060-A2 M4 60 2,8 6,0 7,5 2,2 2,5

P0153.050-012-A2 M5 12 3,7 7,5 9,2 2,5 3P0153.050-016-A2 M5 16 3,7 7,5 9,2 2,5 3P0153.050-020-A2 M5 20 3,7 7,5 9,2 2,5 3P0153.050-025-A2 M5 25 3,7 7,5 9,2 2,5 3P0153.050-030-A2 M5 30 3,7 7,5 9,2 2,5 3P0153.050-040-A2 M5 40 3,7 7,5 9,2 2,5 3P0153.050-050-A2 M5 50 3,7 7,5 9,2 2,5 3P0153.050-060-A2 M5 60 3,7 7,5 9,2 2,5 3

P0153.060-016-A2 M6 16 4,2 8,0 11,0 3,0 4P0153.060-020-A2 M6 20 4,2 8,0 11,0 3,0 4P0153.060-025-A2 M6 25 4,2 8,0 11,0 3,0 4P0153.060-030-A2 M6 30 4,2 8,0 11,0 3,0 4P0153.060-040-A2 M6 40 4,2 8,0 11,0 3,0 4P0153.060-050-A2 M6 50 4,2 8,0 11,0 3,0 4P0153.060-060-A2 M6 60 4,2 8,0 11,0 3,0 4

Order No. d1l1

±1,5

d2

±0,12

l2±0,25

d3

max.

hmax.

A/F



Captive Screws - Cap Headhex. socket

Captive Screws



TipsOther head drive styles - add suffix:-TX for Torx (hexalobular).

P0154.A2

A/F l2

l1

d1d3

d2

h




t

Order No. d1 l1 ±1,5d2

±0,12l2 ±0,25 d3 max. h max. A/F

P0154.030-010-A2 M 3 10 2,0 4,5 5,5 3 2,5P0154.030-016-A2 M 3 16 2,0 4,5 5,5 3 2,5P0154.030-020-A2 M 3 20 2,0 4,5 5,5 3 2,5P0154.030-025-A2 M 3 25 2,0 4,5 5,5 3 2,5P0154.030-030-A2 M 3 30 2,0 4,5 5,5 3 2,5

P0154.040-012-A2 M 4 12 2,8 6,0 7 4 3P0154.040-016-A2 M 4 16 2,8 6,0 7 4 3P0154.040-020-A2 M 4 20 2,8 6,0 7 4 3P0154.040-025-A2 M 4 20 2,8 6,0 7 4 3P0154.040-030-A2 M 4 30 2,8 6,0 7 4 3P0154.040-040-A2 M 4 40 2,8 6,0 7 4 3P0154.040-050-A2 M 4 50 2,8 6,0 7 4 3

P0154.050-012-A2 M 5 12 3,7 7,5 8,5 5 4P0154.050-016-A2 M 5 16 3,7 7,5 8,5 5 4P0154.050-020-A2 M 5 20 3,7 7,5 8,5 5 4P0154.050-025-A2 M 5 25 3,7 7,5 8,5 5 4P0154.050-030-A2 M 5 30 3,7 7,5 8,5 5 4P0154.050-040-A2 M 5 40 3,7 7,5 8,5 5 4P0154.050-050-A2 M 5 50 3,7 7,5 8,5 5 4

P0154.060-012-A2 M 6 12 4,2 7,5 10 6 5P0154.060-016-A2 M 6 16 4,2 7,5 10 6 5P0154.060-020-A2 M 6 20 4,2 7,5 10 6 5P0154.060-025-A2 M 6 25 4,2 7,5 10 6 5P0154.060-030-A2 M 6 30 4,2 7,5 10 6 5P0154.060-040-A2 M 6 40 4,2 7,5 10 6 5P0154.060-050-A2 M 6 50 4,2 7,5 10 6 5P0154.060-060-A2 M 6 60 4,2 7,5 10 6 5P0154.060-080-A2 M 6 80 4,2 7,5 10 6 5

P0154.080-016-A2 M 8 16 6,0 10,0 13 8 6P0154.080-020-A2 M 8 20 6,0 10,0 13 8 6P0154.080-025-A2 M 8 25 6,0 10,0 13 8 6P0154.080-030-A2 M 8 30 6,0 10,0 13 8 6P0154.080-035-A2 M 8 35 6,0 10,0 13 8 6P0154.080-040-A2 M 8 40 6,0 10,0 13 8 6P0154.080-045-A2 M 8 45 6,0 10,0 13 8 6P0154.080-050-A2 M 8 50 6,0 10,0 13 8 6P0154.080-060-A2 M 8 60 6,0 10,0 13 8 6P0154.080-080-A2 M 8 80 6,0 10,0 13 8 6

P0154.100-020-A2 M10 20 7,5 12,5 16 10 8P0154.100-025-A2 M10 25 7,5 12,5 16 10 8P0154.100-030-A2 M10 30 7,5 12,5 16 10 8P0154.100-035-A2 M10 35 7,5 12,5 16 10 8P0154.100-040-A2 M10 40 7,5 12,5 16 10 8P0154.100-045-A2 M10 45 7,5 12,5 16 10 8P0154.100-050-A2 M10 50 7,5 12,5 16 10 8P0154.100-060-A2 M10 60 7,5 12,5 16 10 8P0154.100-080-A2 M10 80 7,5 12,5 16 10 8

P0154.120-025-A2 M12 25 8,0 15,0 18 12 10P0154.120-030-A2 M12 30 8,0 15,0 18 12 10P0154.120-035-A2 M12 35 8,0 15,0 18 12 10P0154.120-040-A2 M12 40 8,0 15,0 18 12 10P0154.120-045-A2 M12 45 8,0 15,0 18 12 10P0154.120-050-A2 M12 50 8,0 15,0 18 12 10P0154.120-060-A2 M12 60 8,0 15,0 18 12 10P0154.120-080-A2 M12 80 8,0 15,0 18 12 10

Order No. d1 l1 ±1,5d2

±0,12l2 ±0,25 d3 max. h max. A/F

113Tel: 01483 26 67 76Fax: 01483 26 67 75


Captive Screws - InchA2 stainless

Captive Screws


Technical NotesOften used with our captive washer (P0168) or retaining flanges (P0169 - for sheet metal applications).

TipsOther head drive styles - add suffix:-TX for Torx (hexalobular).-PZ for Pozidrive.-SE for snake-eye security.All dimensions are in inches.

P0155.i.A2

l1

d1

hl2

d2

A/F

d3




t

Order No. Type d1 l1 d2 d3 l2 h A/F

P0155.I04-07-S-A2 Slotted #4- 40 0,281 0,072 B 0,187 D -P0155.I04-08-S-A2 Slotted #4- 40 0,343 0,072 B 0,187 D -P0155.I06-07-S-A2 Slotted #6- 32 0,312 0,086 T 0,218 D -P0155.I06-09-S-A2 Slotted #6- 32 0,375 0,086 T 0,218 D -P0155.I06-11-S-A2 Slotted #6- 32 0,437 0,086 T 0,218 D -P0155.I08-10-S-A2 Slotted #8- 32 0,406 0,114 J 0,250 R -P0155.I08-12-S-A2 Slotted #8- 32 0,468 0,114 J 0,250 R -P0155.I08-13-S-A2 Slotted #8- 32 0,531 0,114 J 0,250 R -P0155.I10-13-S-A2 Slotted #10-32 0,531 0,136 E 0,312 I -P0155.I10-14-S-A2 Slotted #10-32 0,593 0,136 E 0,312 I -

P0155.I04-07-H-A2 Hex Socket #4- 40 0,281 0,072 B 0,187 D 5/64P0155.I04-08-H-A2 Hex Socket #4- 40 0,343 0,072 B 0,187 D 5/64P1035.I06-07-H-A2 Hex Socket #6- 32 0,312 0,086 T 0,218 D 5/64P0155.I06-09-H-A2 Hex Socket #6- 32 0,375 0,086 T 0,218 D 5/64P0155.I06-11-H-A2 Hex Socket #6- 32 0,437 0,086 T 0,218 D 5/64P0155.I08-10-H-A2 Hex Socket #8- 32 0,406 0,114 J 0,250 J QP0155.I08-12-H-A2 Hex Socket #8- 32 0,468 0,114 J 0,250 R QP1035.I08-13-H-A2 Hex Socket #8- 32 0,531 0,114 J 0,250 R QP0155.I10-13-H-A2 Hex Socket #10-32 0,531 0,136 E 0,312 I DP0155.I10-14-H-A2 Hex Socket #10-32 0,593 0,136 E 0,312 I D



Captive Hex BoltsCaptive Screws



P0158.A2

A/F

l1

l2h

d1

d2




t

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h max. A/F

P0158.030-010-A2 M 3 10 2,0 4,5 2,2 5,5P0158.030-016-A2 M 3 16 2,0 4,5 2,2 5,5P0158.030-020-A2 M 3 20 2,0 4,5 2,2 5,5P0158.030-025-A2 M 3 25 2,0 4,5 2,2 5,5P0158.030-030-A2 M 3 30 2,0 4,5 2,2 5,5P0158.030-040-A2 M 3 40 2,0 4,5 2,2 5,5

P0158.040-012-A2 M 4 12 2,8 6,0 2,9 7P0158.040-016-A2 M 4 16 2,8 6,0 2,9 7P0158.040-020-A2 M 4 20 2,8 6,0 2,9 7P0158.040-030-A2 M 4 30 2,8 6,0 2,9 7P0158.040-040-A2 M 4 40 2,8 6,0 2,9 7P0158.040-050-A2 M 4 50 2,8 6,0 2,9 7P0158.040-060-A2 M 4 60 2,8 6,0 2,9 7



P0158.060-080-A2 M 6 80 4,2 7,5 4,1 10

P0158.080-016-A2 M 8 16 6,0 10,0 5,3 13P0158.080-020-A2 M 8 20 6,0 10,0 5,3 13P0158.080-025-A2 M 8 25 6,0 10,0 5,3 13P0158.080-030-A2 M 8 30 6,0 10,0 5,3 13P0158.080-035-A2 M 8 35 6,0 10,0 5,3 13P0158.080-040-A2 M 8 40 6,0 10,0 5,3 13P0158.080-050-A2 M 8 50 6,0 10,0 5,3 13P0158.080-060-A2 M 8 60 6,0 10,0 5,3 13P0158.080-080-A2 M 8 80 6,0 10,0 5,3 13

P0158.100-020-A2 M10 20 7,5 12,5 6,4 17P0158.100-025-A2 M10 25 7,5 12,5 6,4 17P0158.100-030-A2 M10 30 7,5 12,5 6,4 17P0158.100-035-A2 M10 35 7,5 12,5 6,4 17P0158.100-040-A2 M10 40 7,5 12,5 6,4 17P0158.100-050-A2 M10 50 7,5 12,5 6,4 17P0158.100-060-A2 M10 60 7,5 12,5 6,4 17P0158.100-080-A2 M10 80 7,5 12,5 6,4 17

P0158.120-025-A2 M12 25 8,0 15,0 7,5 19P0158.120-030-A2 M12 30 8,0 15,0 7,5 19P0158.120-035-A2 M12 35 8,0 15,0 7,5 19P0158.120-040-A2 M12 40 8,0 15,0 7,5 19P0158.120-050-A2 M12 50 8,0 15,0 7,5 19P0158.120-060-A2 M12 60 8,0 15,0 7,5 19P0158.120-080-A2 M12 80 8,0 15,0 7,5 19

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h max. A/F



Captive Panel ScrewsCaptive Screws



P0159.A2

90°

l1

l2

h1

d2

d3

l3

h2

w

l4

Order No. d1 d2 l1 l2 d3 l3 l4 h1 h2 w

P0159.030-010-A2 M3 6,5 10 3,2 2 4,3 2 6,5 2 1,2P0159.030-014-A2 M3 6,5 14 3,2 2 7,8 2 6,5 2 1,2P0159.030-016-A2 M3 6,5 16 3,2 2 10,8 2 6,5 2 1,2P0159.030-020-A2 M3 6,5 20 3,2 2 15,3 2 6,5 2 1,2P0159.030-022-A2 M3 6,5 22 3,2 2 16,8 2 6,5 2 1,2P0159.030-024-A2 M3 6,5 24 3,2 2 18,8 2 6,5 2 1,2P0159.030-026-A2 M3 6,5 26 3,2 2 20,3 2 6,5 2 1,2

P0159.031-010-A2 M3 8,0 10 3,2 2 4,3 2 8,0 2 1,2P0159.031-014-A2 M3 8,0 14 3,2 2 7,8 2 8,0 2 1,2P0159.031-016-A2 M3 8,0 16 3,2 2 10,8 2 8,0 2 1,2P0159.031-020-A2 M3 8,0 20 3,2 2 15,3 2 8,0 2 1,2P0159.031-022-A2 M3 8,0 22 3,2 2 16,8 2 8,0 2 1,2P0159.031-024-A2 M3 8,0 24 3,2 2 18,8 2 8,0 2 1,2

P0159.040-010-A2 M4 8,0 10 5,5 3 3 2,5 8,0 2 1,2P0159.040-014-A2 M4 8,0 14 5,5 3 5 2,5 8,0 2 1,2P0159.040-016-A2 M4 8,0 16 5,5 3 8 2,5 8,0 2 1,2P0159.040-020-A2 M4 8,0 20 5,5 3 11 2,5 8,0 2 1,2P0159.040-022-A2 M4 8,0 22 5,5 3 14 2,5 8,0 2 1,2P0159.040-024-A2 M4 8,0 24 5,5 3 16 2,5 8,0 2 1,2P0159.040-027-A2 M4 8,0 27 5,5 3 19 2,5 8,0 2 1,2P0159.040-032-A2 M4 8,0 32 5,5 3 24 2,5 8,0 2 1,2

P0159.050-014-A2 M5 10,0 14 6,5 3,5 2,5 4 10,0 2,5 1,5P0159.050-016-A2 M5 10,0 16 6,5 3,5 5,5 4 10,0 2,5 1,5P0159.050-020-A2 M5 10,0 20 6,5 3,5 8,5 4 10,0 2,5 1,5P0159.050-022-A2 M5 10,0 22 6,5 3,5 11,5 4 10,0 2,5 1,5P0159.050-024-A2 M5 10,0 24 6,5 3,5 13,5 4 10,0 2,5 1,5P0159.050-027-A2 M5 10,0 27 6,5 3,5 16,5 4 10,0 2,5 1,5P0159.050-032-A2 M5 10,0 32 6,5 3,5 21,5 4 10,0 2,5 1,5P0159.050-035-A2 M5 10,0 35 6,5 3,5 24,5 4 10,0 2,5 1,5P0159.050-040-A2 M5 10,0 40 6,5 3,5 27,5 4 10,0 2,5 1,5

117Tel: 01483 26 67 76Fax: 01483 26 67 75


Captive Panel Screws Captive Screws

P0159.060-016-A2 M6 12,0 16 8 4,5 3 5 15,0 2,5 2,0P0159.060-020-A2 M6 12,0 20 8 4,5 6 5 15,0 2,5 2,0P0159.060-022-A2 M6 12,0 22 8 4,5 9 5 15,0 2,5 2,0P0159.060-024-A2 M6 12,0 24 8 4,5 11 5 15,0 2,5 2,0P0159.060-027-A2 M6 12,0 27 8 4,5 14 5 15,0 2,5 2,0P0159.060-032-A2 M6 12,0 32 8 4,5 19 5 15,0 2,5 2,0P0159.060-035-A2 M6 12,0 35 8 4,5 22 5 15,0 2,5 2,0P0159.060-040-A2 M6 12,0 40 8 4,5 25 5 15,0 2,5 2,0P0159.060-045-A2 M6 12,0 45 8 4,5 30 5 15,0 2,5 2,0P0159.060-050-A2 M6 12,0 50 8 4,5 33 5 15,0 2,5 2,0

Order No. d1 d2 l1 l2 d3 l3 l4 h1 h2 w



Captive Thumb ScrewsCaptive Screws



P0160.A2 l1

l2h

d1d3

d2

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h d3

P0160.030-016-A2 M 3 16 2,0 8,0 10 5P0160.030-020-A2 M 3 20 2,0 10,0 10 5P0160.030-025-A2 M 3 25 2,0 12,5 10 5P0160.030-030-A2 M 3 30 2,0 15,0 10 5P0160.030-035-A2 M 3 35 2,0 17,5 10 5P0160.030-040-A2 M 3 40 2,0 20,0 10 5P0160.030-050-A2 M 3 50 2,0 25,0 10 5

P0160.035-016-A2 M3,5 16 2,3 8,0 10 5P0160.035-020-A2 M3,5 20 2,3 10,0 10 5P0160.035-025-A2 M3,5 25 2,3 12,5 10 5P0160.035-030-A2 M3,5 30 2,3 15,0 10 5P0160.035-035-A2 M3,5 35 2,3 17,5 10 5P0160.035-040-A2 M3,5 40 2,3 20,0 10 5P0160.035-050-A2 M3,5 50 2,3 25,0 10 5

P0160.040-016-A2 M 4 16 2,8 8,0 10 5P0160.040-020-A2 M 4 20 2,8 10,0 10 5P0160.040-025-A2 M 4 25 2,8 12,5 10 5P0160.040-030-A2 M 4 30 2,8 15,0 10 5

P0160.040-035-A2 M 4 35 2,8 17,5 10 5P0160.040-040-A2 M 4 40 2,8 20,0 10 5P0160.040-050-A2 M 4 50 2,8 25,0 10 5



Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h d3

Tel: 01483 26 67 76Fax: 01483 26 67 75


Captive Thumb Screws Captive Screws



P0160.A4l1

l2h

d1d3

d2

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h d3


P0160.035-016-A4 M3,5 16 2,3 8,0 10 5P0160.035-020-A4 M3,5 20 2,3 10,0 10 5P0160.035-025-A4 M3,5 25 2,3 12,5 10 5P0160.035-030-A4 M3,5 30 2,3 15,0 10 5P0160.035-035-A4 M3,5 35 2,3 17,5 10 5P0160.035-040-A4 M3,5 40 2,3 20,0 10 5P0160.035-050-A4 M3,5 50 2,3 25,0 10 5

P0160.040-016-A4 M 4 16 2,8 8,0 10 5P0160.040-020-A4 M 4 20 2,8 10,0 10 5P0160.040-025-A4 M 4 25 2,8 12,5 10 5P0160.040-030-A4 M 4 30 2,8 15,0 10 5

P0160.040-035-A4 M 4 35 2,8 17,5 10 5P0160.040-040-A4 M 4 40 2,8 20,0 10 5P0160.040-050-A4 M 4 50 2,8 25,0 10 5



Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 h d3

119Tel: 01483 26 67 76Fax: 01483 26 67 75


Captive Thumb Screws Captive Screws

MaterialStainless steel (A2-70, AISI 303).Also available on request in steel anodised, black oxide or zinc plated) stainless steel (A4, AISI 316), brass, aluminium etc.


P0161.A2l1

l2h

d1d3

d2

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 d3 h

P0161.030-008-A2 M 3 8,0 2,0 4,5 8 5P0161.030-010-A2 M 3 10,0 2,0 4,5 8 5P0161.030-012-A2 M 3 12,0 2,0 4,5 8 5P0161.030-014-A2 M 3 14,0 2,0 4,5 8 5P0161.030-016-A2 M 3 16,0 2,0 4,5 8 5

P0161.035-008-A2 M3,5 8,0 2,3 6,0 8 5P0161.035-010-A2 M3,5 10,0 2,3 6,0 8 5P0161.035-012-A2 M3,5 12,0 2,3 6,0 8 5P0161.035-014-A2 M3,5 14,0 2,3 6,0 8 5P0161.035-016-A2 M3,5 16,0 2,3 6,0 8 5

P0161.040-010-A2 M 4 10,0 2,8 6,0 10 5P0161.040-012-A2 M 4 12,0 2,8 6,0 10 5P0161.040-014-A2 M 4 14,0 2,8 6,0 10 5P0161.040-016-A2 M 4 16,0 2,8 6,0 10 5P0161.040-018-A2 M 4 18,0 2,8 6,0 10 5P0161.040-020-A2 M 4 20,0 2,8 6,0 10 5P0161.040-025-A2 M 4 25,0 2,8 6,0 10 5

P0161.050-010-A2 M 5 10,0 3,7 7,5 10 5P0161.050-012-A2 M 5 12,0 3,7 7,5 10 5P0161.050-014-A2 M 5 14,0 3,7 7,5 10 5P0161.050-016-A2 M 5 16,0 3,7 7,5 10 5P0161.050-018-A2 M 5 18,0 3,7 7,5 10 5P0161.050-020-A2 M 5 20,0 3,7 7,5 10 5P0161.050-025-A2 M 5 25,0 3,7 7,5 10 5P0161.050-030-A2 M 5 30,0 3,7 7,5 10 5


Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 d3 h


Tel: 01483 26 67 76Fax: 01483 26 67 75

Captive Thumb ScrewsCaptive Screws

MaterialStainless steel (A2-70, AISI 303).Also available on request in steel anodised, black oxide or zinc plated) stainless steel (A4, AISI 316), brass, aluminium etc.


P0161.A4l1

l2h

d1d3

d2

Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 d3 h

P0161.030-008-A4 M 3 8,0 2,0 4,5 8 5P0161.030-010-A4 M 3 10,0 2,0 4,5 8 5P0161.030-012-A4 M 3 12,0 2,0 4,5 8 5P0161.030-014-A4 M 3 14,0 2,0 4,5 8 5P0161.030-016-A4 M 3 16,0 2,0 4,5 8 5

P0161.035-008-A4 M3,5 8,0 2,3 6,0 8 5P0161.035-010-A4 M3,5 10,0 2,3 6,0 8 5P0161.035-012-A4 M3,5 12,0 2,3 6,0 8 5P0161.035-014-A4 M3,5 14,0 2,3 6,0 8 5P0161.035-016-A4 M3,5 16,0 2,3 6,0 8 5


P0161.050-010-A4 M 5 10,0 3,7 7,5 10 5P0161.050-012-A4 M 5 12,0 3,7 7,5 10 5P0161.050-014-A4 M 5 14,0 3,7 7,5 10 5P0161.050-016-A4 M 5 16,0 3,7 7,5 10 5P0161.050-018-A4 M 5 18,0 3,7 7,5 10 5P0161.050-020-A4 M 5 20,0 3,7 7,5 10 5P0161.050-025-A4 M 5 25,0 3,7 7,5 10 5P0161.050-030-A4 M 5 30,0 3,7 7,5 10 5


Order No. d1 l1 ±1,5 d2 ±0,12 l2 ±0,25 d3 h

Captive Screws


Technical InformationRetaining Washers

115

Captive Screw

s from A

utomotion C

omponents

Retaining washer (threaded)

Panel removed, screw retained

Structure

Other options to retain screws to panels are either our retaining washers or our retaining fl anges.

Retaining washers These are simple but effective when used with our captive screws. The captive screws have a normal thread then a reduced diameter for the rest of the screw length.The washer has a small length of thread on the internal diameter and once screwed on to the captive screw is effectively captive.

Example

Screw the thin retaining washer onto the captive screw and the screw is therefore retained to the panel.

Washer shallow thread

Screw overthreaded section

Counterbore for screw length

Shallow counterbore for washer



Threaded Captive Washersfor captive screws

Captive Screws

MaterialStainless steel (A2, AISI 303 and A4, AISI 316) and steel (zinc-plated).

Technical NotesCaptive washers have a very shallow thread on the i/d. This enables them to be screwed on, and once past the threads

they do not separate from the captive screw or bolt.

TipsThe panel (onto which the screw needs to be retained) is placed onto the captive screw, the threaded washer is then threaded onto the screw, past the threaded section and the screew is therefore captive to the panel.

P0168 d2

d1

w

PanelThreaded

captive washer

Order No. d1 d2w

+/-0,05Material

P0168.025-A2 M2,5 5,0 1,0 A2 s/sP0168.030-A2 M 3 6,0 1,0 A2 s/sP0168.040-A2 M 4 8,0 1,2 A2 s/sP0168.050-A2 M 5 10,0 1,5 A2 s/sP0168.060-A2 M 6 12,0 1,6 A2 s/sP0168.080-A2 M 8 16,0 2,0 A2 s/sP0168.100-A2 M10 20,0 3,0 A2 s/sP0168.120-A2 M12 24,0 3,5 A2 s/s

P0168.025-A4 M2,5 5,0 1,0 A4 s/sP0168.030-A4 M 3 6,0 1,0 A4 s/sP0168.040-A4 M 4 8,0 1,2 A4 s/sP0168.050-A4 M 5 10,0 1,5 A4 s/sP0168.060-A4 M 6 12,0 1,6 A4 s/s

P0168.080-A4 M 8 16,0 2,0 A4 s/sP0168.100-A4 M10 20,0 3,0 A4 s/sP0168.120-A4 M12 24,0 3,5 A4 s/s

P0168.025-ZP M2,5 5,0 1,0 Steel ZPP0168.030-ZP M 3 6,0 1,0 Steel ZPP0168.040-ZP M 4 8,0 1,2 Steel ZPP0168.050-ZP M 5 10,0 1,5 Steel ZPP0168.060-ZP M 6 12,0 1,6 Steel ZPP0168.080-ZP M 8 16,0 2,0 Steel ZPP0168.100-ZP M10 20,0 3,0 Steel ZPP0168.120-ZP M12 24,0 3,5 Steel ZP

Order No. d1 d2w

+/-0,05Material

Captive Screws


Technical InformationRetainer Flanges

121

Captive Screw

s from A

utomotion C

omponents

Automotion captive screw retainer fl anges are available in both aluminium and stainless steel to suit the most common panel thicknesses. The retainer fl ange has a very shallow thread length on it internal diameter.

A suitable hole is machined into the panel, and the underside of the hole is countersunk. The fl ange is then joined to the panel using either a simple ball bearing (or for higher volume parts we provide a hand punch) to form the bottom of the fl ange into the countersink. This retains the fl ange to the sheet.

The captive screw or bolt is then threaded onto the retainer fl ange and once the thread length is through the initial shallow threaded portion of the retainer fl ange – is captive.

Retainer flange

Counterbore

Shallow threaded portion

Panel

Panel

Retainer flange

Ball bearing to form flange

Counterbore

Structure

Panel

Retainer flange

Captive screw

Retaining fl ange secured onto panel using ball bearing or punch

With any captive screw installation it is important to ensure that there is enough space for the threaded portion to become

disengaged from the female thread of the structure.

Preparation:

• Select Retainer based upon panel thickness

• Countersink panel

Mounting:

• Insert fl ange

• Use ball bearing or punch to form fl ange onto panel



Retainer Flanges - Stainlessfor captive screws

Captive Screws

MaterialStainless steel (A2-70, AISI 303).Also available on request in steel (anodised, black oxide or zinc plated) stainless steel (A4, AISI 316), brass.For aluminium retainer flanges please see part no. P0169.AL.

Technical NotesSelect the retainer flange to suit thread of the captive screw and the thickness of the panel to be retained.

Drill and countersink hole in the panel and use the ball bearing supplied to spread the flange into the countersunk hole.The captive screw is then screwed into the flange and the screw is retained to the panel.

TipsMounting hole diameter to H9 clearance.Countersink 90° to diameter d6.

P0169.A2

Ball bearing forinstallation only

d3 d1

h l

d4 d5 d690°

d2

Panel

Order No. For threadd1

Panel t± 8%

d2 h l d3

Instalation ball Ø

d4

d5

H9d6 Gauge

P0169.030-007-A2 M3 0,7 5,0 1,5 0,7 7,5 5 5,0 6,0 22P0169.030-009-A2 M3 0,9 5,0 1,5 0,9 7,5 5 5,0 6,0 20P0169.030-012-A2 M3 1,25 5,0 1,5 1,25 7,5 5 5,0 6,0 18P0169.030-015-A2 M3 1,5 5,0 1,5 1,5 7,5 5 5,0 6,0 16P0169.030-020-A2 M3 2,0 5,0 1,5 2,0 7,5 5 5,0 6,0 14P0169.030-025-A2 M3 2,5 5,0 1,5 2,5 7,5 5 5,0 6,0 12P0169.030-030-A2 M3 3,0 5,0 1,5 3,0 7,5 5 5,0 6,0 10P0169.030-040-A2 M3 4,0 5,0 1,5 4,0 7,5 5 5,0 6,0 8P0169.030-050-A2 M3 5,0 5,0 1,5 5,0 7,5 5 5,0 6,0 6P0169.030-060-A2 M3 6,0 5,0 1,5 6,0 7,5 5 5,0 6,0 4

P0169.040-007-A2 M4 0,7 6,8 2,0 0,7 10,0 7 6,8 8,2 22P0169.040-009-A2 M4 0,9 6,8 2,0 0,9 10,0 7 6,8 8,2 20P0169.040-012-A2 M4 1,25 6,8 2,0 1,25 10,0 7 6,8 8,2 18

123Tel: 01483 26 67 76Fax: 01483 26 67 75


Retainer Flanges - Stainlessfor captive screws

Captive Screws

P0169.040-015-A2 M4 1,5 6,8 2,0 1,5 10,0 7 6,8 8,2 16P0169.040-020-A2 M4 2,0 6,8 2,0 2,0 10,0 7 6,8 8,2 14P0169.040-025-A2 M4 2,5 6,8 2,0 2,5 10,0 7 6,8 8,2 12P0169.040-030-A2 M4 3,0 6,8 2,0 3,0 10,0 7 6,8 8,2 10P0169.040-040-A2 M4 4,0 6,8 2,0 4,0 10,0 7 6,8 8,2 8P0169.040-050-A2 M4 5,0 6,8 2,0 5,0 10,0 7 6,8 8,2 6P0169.040-060-A2 M4 6,0 6,8 2,0 6,0 10,0 7 6,8 8,2 4





Panel t± 8%

d2 h l d3

Instalation ball Ø

d4

d5

H9d6 Gauge



Retainer Flanges - Aluminiumfor captive screws

Captive Screws

MaterialAluminium.Also available on request in steel (anodised, black oxide or zinc plated) stainless steel (A4, AISI 316), brass.For stainless (A2) retainer flanges please see part no. P0169.A2.

Technical NotesSelect the retainer flange to suit thread of the captive screw and the thickness of the panel to be retained.

Drill and countersink hole in the panel and use the ball bearing supplied to spread the flange into the countersunk hole.The captive screw is then screwed into the flange and the screw is retained to the panel.


P0169.AL

Ball bearing forinstallation only

d3 d1

h l

d4 d5 d690°

d2

Panel


Panel t± 8%

d2 h l d3

Instalation ball Ø

d4

d5

H9d6 Gauge

P0169.030-007-AL M3 0,7 5,0 1,5 0,7 7,5 5 5,0 6,0 22P0169.030-009-AL M3 0,9 5,0 1,5 0,9 7,5 5 5,0 6,0 20P0169.030-012-AL M3 1,25 5,0 1,5 1,25 7,5 5 5,0 6,0 18P0169.030-015-AL M3 1,5 5,0 1,5 1,5 7,5 5 5,0 6,0 16P0169.030-020-AL M3 2,0 5,0 1,5 2,0 7,5 5 5,0 6,0 14P0169.030-025-AL M3 2,5 5,0 1,5 2,5 7,5 5 5,0 6,0 12P0169.030-030-AL M3 3,0 5,0 1,5 3,0 7,5 5 5,0 6,0 10P0169.030-040-AL M3 4,0 5,0 1,5 4,0 7,5 5 5,0 6,0 8P0169.030-050-AL M3 5,0 5,0 1,5 5,0 7,5 5 5,0 6,0 6P0169.030-060-AL M3 6,0 5,0 1,5 6,0 7,5 5 5,0 6,0 4

P0169.040-007-AL M4 0,7 6,8 2,0 0,7 10,0 7 6,8 8,2 22P0169.040-009-AL M4 0,9 6,8 2,0 0,9 10,0 7 6,8 8,2 20P0169.040-012-AL M4 1,25 6,8 2,0 1,25 10,0 7 6,8 8,2 18

125Tel: 01483 26 67 76Fax: 01483 26 67 75


Retainer Flanges - Aluminiumfor captive screws

Captive Screws

P0169.040-015-AL M4 1,5 6,8 2,0 1,5 10,0 7 6,8 8,2 16P0169.040-020-AL M4 2,0 6,8 2,0 2,0 10,0 7 6,8 8,2 14P0169.040-025-AL M4 2,5 6,8 2,0 2,5 10,0 7 6,8 8,2 12P0169.040-030-AL M4 3,0 6,8 2,0 3,0 10,0 7 6,8 8,2 10P0169.040-040-AL M4 4,0 6,8 2,0 4,0 10,0 7 6,8 8,2 8P0169.040-050-AL M4 5,0 6,8 2,0 5,0 10,0 7 6,8 8,2 6P0169.040-060-AL M4 6,0 6,8 2,0 6,0 10,0 7 6,8 8,2 4





Panel t± 8%

d2 h l d3

Instalation ball Ø

d4

d5

H9d6 Gauge



Installation Toolsfor retainer flanges

Captive Screws

MaterialBall bearings and punches from steel.For small quantity installation we suggest you install the flanges using the ball bearings, for large quantities it is easier to purchase the retaining flange punch.

Technical NotesSelect the retainer flange to suit thread of the captive screw and the thickness of the panel to be retained.Drill and countersink hole in the panel and use the ball

bearing supplied to spread the flange into the countersunk hole.The captive screw is then screwed into the flange and the screw is retained to the panel.


P0169.TL

l1

d3 d2

EitherPunch

OrBall

Order No. Type For flangesize d1 d2 d3 l1 l2

P0169.030-BL Ball bearing P0169.030 - - 5 100 30P0169.040-BL Ball bearing P0169.040 - - 7 100 30P0169.050-BL Ball bearing P0169.050 - - 8 100 30P0169.060-BL Ball bearing P0169.060 - - 10 100 30P0169.080-BL Ball bearing P0169.080 - - 13 100 30

P0169.030-PN Punch P0169.030 10,0 7,0 5 100 30P0169.040-PN Punch P0169.040 11,5 9,0 7 100 30P0169.050-PN Punch P0169.050 13,0 10,4 8 100 30P0169.060-PN Punch P0169.060 16,0 12,6 10 100 30P0169.080-PN Punch P0169.080 19,0 16,0 13 100 30

captive screws - springfix linkages · 2015. 2. 10. · (qq-n-290a) nickel is a corrosion...

Documents