capacitive sensors - steven engineering · 2005-02-01 · capacitive sensors work where others...

CapacitiveSensors

Sensing All Materials

All the Time!

Courtesy of Steven Engineering, Inc. � 230 Ryan Way, South San Francisco, C

A, 94080-6370� Main Office: (650) 588-9200� Outside Local Area: (800) 258-9200� www.stevenengineering.com

1

QF5.5

This is the new flat style capacitive sensor from TURCK. This sensor is small insize, but long on range. It measures only 5.5 millimeters in width and has anembeddable sensing range of 10 millimeters. The sensor housing is overmoldedwith a rugged polypropylene material and is available with or withoutpotentiometer.

Q10

This is another addition to the growing Q-Pak line. The Q10 fits in size betweenthe 8 mm and 14 mm low profile sensors. The Q10 is available in DC only witha fixed 8-millimeter range without potentiometer.

K34 Barrels

TURCK now has 34-millimeter diameter capacitive sensors in smooth barrelplastic housings. They are available in 2-wire AC, 3-wire DC and 4-wire DCwith variable output options. We also offer the BS-34 mounting bracket thatallows for base mounting or side mounting options.

BCF – Noise Immune Capacitive Sensors

The new “BCF” capacitive sensors are designed to be used in environmentswhere electrical noise and high static discharge may exist. Improvements madeto the circuitry of our printed circuit board has allowed for increased protectionagainst radio frequency, high voltage transients, line coupled noise and surges.

W h a t ’ s N e w i n T U R C K ’ s L i n e o f C a p a c i t i v e s



Package Inspection

One of the major benefits of capacitive sensorsis their ability to sense through low-dielectricmaterials. With the sensitivity properlyadjusted, these sensors can be used to “seethrough” an object wall to detect its contents.

From inspecting jars through a cardboard boxto sensing ammonia in a vat - capacitivesensors are made for these applications. Inaddition, capacitive sensors have the ability tosense most materials including wood, plastics,cardboard, glass, grain, all metals and mostfluids. The versatility of these sensors can helpyou save time and run more efficiently.

Grain and Plastic Pellet Detection

The wide sensitivity band of TURCK sensorsallows for detection of a variety of granular orpowdered materials. Capacitive sensors arewidely used to monitor the level of plasticpellets in the hoppers of injection moldingmachines. TURCK’s new “BCF” line ofsensors are ideal for this application.TURCK Intrinsically Safe NAMUR sensors arealso used in grain elevators to monitor thelevels of materials ranging from rice and barleymalt to corn and soybeans.

Small Parts Detection

Another great use for capacitive sensors is to detect small items as theycome down the assembly line. They can be used to count product orsense proper operation of the line. Choose from many styles withshort-circuit and overload protection in AC, DC and Intrinsically SafeNAMUR.

S e n s e t h r o u g h o b j e c t s w i t h a c c u r a c y !

2



C a p a c i t i v e S e n s o r s W o r k W h e r e O t h e r s D o n ’ t !

Wire Break Detection

TURCK capacitive sensors are ideal forsensing wire breakage. Our sensors willdetect even the smallest wires of anymetal. The long sensing ranges allowthe wire to bounce during the processwithout causing false outputs.

Liquid Level Detection

Capacitive sensors have the ability to “see through” lower dielectric materials, suchas plastic or glass, to detect higher dielectric ones. This allows capacitive sensors to detectlevels of many types of materials either directly through the wall for plastic tanks, or byutilizing a sight glass or tank well for metal tanks. With TURCK’s Intrinsically Safe NAMURsensors, PVDF models and Teflon� tank wells, even explosive or corrosive materials can besafely sensed.

You may know that TURCK has the broadest product offering in inductive sensors, but didyou also know that we have the most extensive line of capacitive sensors?

TURCK’s Q-Pak� capacitivesensors are available in packages upto 10 times narrower thanconventional barrel-style sensors.Also our PVDF sensors offerincredible resistance to harshchemical environments found inthe semiconductor and chemicalindustries.

TURCK presents... The industry’s most extensive line of capacitive sensors

3



Sensitivity Adjustments

Many applications require adjusting the sensitivity of thecapacitive sensor in order to reliably detect the targetmaterial.Although the potentiometer is factory set for an operatingdistance of 0.7 to 0.8 times the rated operating distance, itcan be easily changed. Some sensors even feature aremote potentiometer, allowing adjustments to be madein locations away from the sensor.

Most TURCK capacitive sensors are listed as embeddable.By increasing the sensitivity, the embeddable sensor canbe changed into a non-embeddable version withenhanced sensing capabilities.

Superior Customer Support

With over 2,000 trained technical specialists in North America, we can assure you thatapplications help and service are nearby, wherever you are located. Plus directfactory support that’s simply a toll-free call away. Call, write or e-mail us foradditional information.

TURCK Inc.3000 Campus DriveMinneapolis, MN 55441Phone 763-553-7300FAX 763-553-0708e-mail: [email protected]

Compensation Electrode

TURCK’s capacitive sensors feature a compensation electrode thatminimizes false outputs due to contamination on the sensor face. Thecompensation circuitry ignores splashing water or dust buildup that iscommon in capacitive sensor applications.

S e n s i n g A l l O b j e c t s A l l t h e T i m e !

4



5 TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com

TURCKCapacitive Sensor - Principles of Operation

Noise Immunity

Capacitive sensors were originally designed for use in level detection applications in areas that were generally far away from otherelectrical equipment. As factory automation has become more prevalent throughout industrial markets, these capacitive sensorshave gravitated into new environments where electrical noise levels are greatly increased. Electrical noise can be produced byvarious sources including variable frequency drives, electromechanical motors and standard walkie-talkie devices. These “noisy”environments can have adverse effects on sensing devices causing them to operate improperly and unreliably

TURCK recognizes this and has developed a new circuit for its capacitive sensors. These new “BCF” sensors incorporate aunique filter principle, making them immune to most industrial noise. This principle involves a fixed oscillator frequencycombined with a rectifier filter providing superior noise immunity over the competition.

TURCK’s fixed oscillator allows the sensor to maintain a constant frequency regardless of sensitivity adjustment. This fixedfrequency is high enough to ignore most of the “standard” noise levels seen on plant floors

Electrical noise is mostly symmetrical which makes it easier to identify and separate from the sensor’s input signal. The TURCKrectifier filter is able to block this noise allowing only the “useful” input signal, which is in phase with the oscillator frequency, topass.

These two innovative electrical techniques give TURCK the best defense against industrial noise. The list of specifications and testresults below demonstrates how TURCK meets or exceeds all of the rigid standards established by CE. In fact, the criteria setforth by CE is so stringent that most capacitive sensors offered on the market today cannot pass any or all of these testingrequirements. If you have a capacitive sensor application located in a “noisy” environment choose the new “BCF” sensors fromTURCK to ensure your process operates smoothly.

Test Type CE “Product”Standard

CE “Generic”Standard

TURCK “BCF”Noise Immune

Capacitive Sensors

Immunity to Electrostatic Discharge(ESD) IEC 1000-4-2EN 61000-4-2

4 KV DirectContact

8 KV Airborne

4 KV DirectContact

8 KV Airborne

8 KV DirectContact

30 KV Airborne

Immunity to Radiated Electromagnetic Fields.Radio Frequency Interference (RFI)

IEC 1000-4-3EN 61000-4-3

3 V/M80-1000 MHz

10V/M80-1000 MHz

15 V/M80-1000 MHz

Immunity to Electrical Fast Transients(Burst-High Voltage)

IEC 1000-4-4EN 1000-4-4 2000 V 2000 V 3000 V

Immunity to Conducted R.F. Voltage(Line coupled Noise)

IEC 1000-4-6EN 61000-4-6 Undefined 10 V

150 KHZ-80 MHz>10 V

150 KHZ-230 MHz

Immunity to Surges(lightning strike) IEC 60255-5 1KV, 500� DC Undefined 1KV, 500� DC



TURCK Inc. 3000 Campus Drive Minneapolis, MN 55441 Application Support: 1-800-544-7769 Fax: (763) 553-0708 www.turck.com 6

Product Information

Visit TURCK on the Internet:http://www.turck.com

Symbol Key

2-Wire Sensorwith Potted-In Cable

Sensor with 4-Pineurofast Connector


Sensor with 3-Pinpicofast Connector


Sensor with 3-Pinmicrofast Connector

Sensor withTerminal Chamber

Note: All dimensions in this manual are shown as: inches [mm]

Part Number Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 8Principles of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 18Sensor Housing Materials/Chemical Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14Dielectric Constants Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 16Environmental Conditions/Compensation Electrode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Product Pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 74Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 79Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Q-Pak � Rectangular Stylesin Metal and Plastic

Metal and Plastic Barrels withQuick Disconnect

Metal and Plastic Barrels withPotted-In Cable

3-Wire DC 19 - 26 3-Wire DC 39 - 42

4-Wire DC 27 - 28 3-Wire DC 31 - 34, 37 - 38 4-Wire DC 43 - 46

2-Wire AC 53 - 56 4-Wire DC 35 - 36 2-Wire AC 61 - 64

2-Wire NAMUR 69 - 70 2-Wire AC 59 - 60 2-Wire NAMUR 71 - 72

Accessories

Tank Wells 75 - 76

Mounting Brackets 76 - 79

PVDF Barrels Plastic Barrels withIntegral Terminal Chamber

Long Range Styles

3 and 4-Wire DC 47 - 48 4-Wire DC 49 - 52 4-Wire DC 29 - 30

2-Wire NAMUR 73 - 74 2-Wire AC 65 - 68 2-Wire AC 57 - 58




TURCKCapacitive Part Number Key Keys are to assist in IDENTIFICATION ONLY.

Consult factory for catalog items not identified.

Capacitive Sensor Part Number Key

B C 20 - K 40 SR - F Z 3 X2 Wiring Options Special Option Codes

B = Embeddable (Shielded)N = Non-embeddable

Mounting

BarrelM = Metal, Partial ThreadingK = Plastic, SmoothKT = PVDF Plastic, SmoothP = Plastic, Full ThreadingPT = PVDF Plastic, Full ThreadingS = Plastic, Partial ThreadingRectangularQ = Rectangular Metal or Plastic HousingModularCP = Plastic Housing, Removable Sensor

with Terminal Chamber Base

Housing Style

Sensor Diameter (mm)

F = Noise Immune Filter

Circuit Design Modifier

C = Capacitive

Principle of Function

Rated Operating Distance (mm)

SR = Straight Terminal Chamber

Housing Modifier

N = NPN Transistor (Current-Sinking)P = PNP Transistor (Current-Sourcing)Z = 2-wire AC (SCR Output)

Output

AC3 = 20-250 VACDC4 = 10-65 VDC, Polarity Protected, Pulsed SCP6 = 10-30 VDC, Polarity Protected, Pulsed SCP

Voltage Range

A = Normally OpenF = Connection Programmable (N.O. or N.C.)R = Normally ClosedV = Complementary Outputs; One N.O., One N.C.Y0 = NAMUR Output, Requires Switching Amplifier

Output Function

Examples:Blank = 0 LEDs

X2 = 2 LEDs

Number of LEDs




BC10-M30-AP4X - H1 1 4 1

A) Connectorized Sensor

Number of Pins

B1 = minifast �, Metal, MaleB2 = minifast �, Plastic, MaleB3 = microfast �, Metal, MaleH1 = eurofast �, Metal or Plastic, MaleV1 = picofast �, Metal, Male

Connector Family

1 = Straight

Connector / Sensor Transition

Wiring Options

Example:1 = Standard3 = N.C. DC Output on Pin 4

(for US)

Factory Code

BC 5-S18-AP4X 7M

B) Potted Cable

Blank = 2 Meter cable7M = 7 Meter cable

Cable Length

AC: RSM 30 = minifast, 3-conductorSB 3T = microfast, 3-conductor

DC: RS 4T = eurofast, 3-conductorRS 4.21T = eurofast, NAMUR, 2 conductorRS 4.4T = eurofast, 4-conductorRSM 40 = minifast, 4-conductorPSG 3 = picofast, 3-conductor

Standard Cordset Connector

Examples:0.2 = 0.2 meters2 = 2 meters

Length of Cable (M)

BC 5-S18-Y0X - 0.2M - RS 4.21T

C) Potted Cable with Molded Connector

Special Option Codes

BC20-CP40-VN4X2 /S250

Option Codes for Special or Custom Built Sensors

Example:/S250 = No Potentiometer

Option Code





Applications

Operating Principle

� Liquid Level Control for both explosive and non-explosive materials.

� Package Inspection for product content and/or fill level.

� Wire-Break Detection for wire sizes down to .003".

� Plastic Pellet Detection in a hopper for injection molding processes.

� Grain or Food Products Level Detection; intrinsically safe models available.

� Small Metal Parts Detection; greater sensing range than comparable inductive sensors.

Figure 1

Figure 2

The active element is formed by two metallic electrodes positioned much like an “opened” capacitor (Figure 1).Electrodes A and B are placed in a feedback loop of a high frequency oscillator. When no target is present, thesensor’s capacitance is low, therefore the oscillation amplitude is small. When a target approaches the face of thesensor, it increases the capacitance. This increase in capacitance results in an increased amplitude of oscillation.The amplitude of oscillation is measured by an evaluating circuit that generates a signal to turn on or off the output(Figure 2).




Operating Principle

Figure 3

Figure 4

When a Conductive Target enters the sensor’s field, it forms a counter electrode to the active face of the sensor,thus decreasing the distance between the electrodes (d) and increasing their average surface area (Figure 3). Thecapacitance with a metal target present is always greater than the capacitance of the circuit in the absence of thetarget.

Reduction factors for different metals are not a consideration when using capacitive sensors.

When a Non-Conductive Target enters the sensor’s field, it acts as an electrical insulator between electrodes Aand B (Figure 4).

The dielectric constant of the material (�) is a measure of its insulation properties. All liquids and solids have agreater dielectric constant than air (�air = 1). Therefore, the capacitance with a non-metallic target present isalways greater than the capacitance of the circuit in the absence of the target.

Capacitance is a function of the surface area of either electrodes (A or B), the distance between the electrodes (d),and the dielectric constant of the material (�) between the electrodes (Figure 1).

C = capacitance of sensorA = surface area of either electroded = distance between two electrodes� = dielectric constant of material between the electrodes

� x AC =

d





Sensitivity Adjustment

Figure 5 Standard Target

Capacitive sensors can be adjusted two ways in order to sense a target consistently.

1. Physical adjustment - moving the sensor towards or away from the target is the preferred method of adjusting sensitivitywhen the sensor is not in direct contact with the target. This allows materials to be moved into or out of range whileleaving the sensor at the factory setting or after re-calibration to the nominal operating distance Sn.

2. Adjustment of the potentiometer - turning the potentiometer in a clockwise direction increases the sensitivity of thesensor. The potentiometer is factory-set for an operating distance of 0.7 to 0.8 Sn to a grounded standard target(Figure 5). It should be adjusted in increments of no greater than a quarter-turn (Figure 6). Increasing the sensitivityresults in a greater operating distance to both conductive and non-conductive targets.

Figure 7

In general terms, the larger the dielectricconstant of a material, the greater theachievable operating distance.

When detecting organic materials thesensing distance will depend largely onthe water content (�water = 88).

When sensing non-conductive targets, the larger the dielectric constant of a material, the greater the achievableoperating distance (Figure 7). Adjusting the potentiometer affects the total curve; for example, if the potentiometer isadjusted for less sensitivity, it will have less operating distance to all materials.

It should be noted that a large increase in sensitivity will cause the sensor to become nonembeddable, and may resultin an unstable switching point that can be influenced by environmental changes such as temperature, humidity, dust,etc.

At adjustments of S > Sn, the differential travel (hysteresis) can also increase.

Figure 6 Potentiometer Adjustment




Example Application 2 - Mounting

Problem:A metal tank containing a water-based solution has a 1" outsidediameter sight glass. What sensor and bracket could be used formonitoring the liquid level?

Solution:The QF 5.5 flat style can used on non-conductivetubing up to 1.0 inch in diameter with the standardmounting straps provided with the sensor (Figure 8).

Other mounting straps for larger diameters are availableupon request (consult factory).

Example Application 1 - Adjustment

Problem:Can a BC20-K40SR-FZ3X2 be used to sense the presence of ammonia from behind a .125" glass panel?

Solution:The dielectric constants for these materials can be found on pages 15 and 16.

Dielectric (�r) of ammonia: 20Dielectric (�r) of glass: 10

From Figure 7, �r = 20 corresponds to 80% Sn; �r = 10 corresponds to 60% Sn.

Since Sn = 20 mm for a BC20: S for ammonia = 16 mmS for glass = 12 mm

The difference is 4 mm. The glass thickness = .125", or 3.1 mm. This application will work with a 0.9 mmmargin. This means that by adjusting the potentiometer there should be a reasonable distinction between theglass and the ammonia as seen by the sensor.

To set up the sensor for this application, the sensing face of the sensor should be flush against the sight glass.

1. With no ammonia present (if possible) turn the potentiometer clockwise until the sensor turns on. If thesensor is

already on, skip step one.2. Next, turn the potentiometer counter clockwise until the sensor turns off.3. Now add the ammonia so that it covers the glass panel.4. Once again, turn the potentiometer counter clockwise, counting the number of turns until the sensor turnsoff.*5. Divide the number of turns by two and turn the potentiometer back clockwise that amount.

Using this process will allow for a margin of error in either direction. If this application had called forsomething other than ammonia, like molasses, that tends to leave buildup behind, step 1 above should beperformed with the buildup present(if possible).* If sensor does not turn off after 10 full turns, turn back the potentiometer clockwise between 3 to 5 turns.Minor adjustments may need to be made to achieve desired setting.

Figure 8





Housing Style ABS PA, Trog. T PA PBT PP PUR PVC PVDF Brass Zinc

CP40 X* X

CP80 X X* X

G, M (potted-in cable) X X* X* X

G, M (connector) X X

K40SR, P30SR X X*

K34 X* X X*

KT34 X

P, S (potted-in cable) X X* X*

P, S (connector) X

PT30 X

Q08 X X* X* X

Q10, Q14, Q20 X X* X* X*

QF5.5 X X*

S185 X* X* X

* Optional part, ie cable gland, connector, cable, bracket, etc.

Plastic Material Descriptions

Matrix of TURCK Sensor Materials

ABS - Acrylonitrile-Butadiene-Styrene Impact resistant, rigid. Resistant to aqueous acids, alkalis, salts, alcohols,oils, concentrated hydrochloric acid; disintegrated by concentratedsulfuric or nitric acids, esters, ketones.

PA - Polyamide (nylon) Good mechanical strength, temperature resistant.

PA, Amorphous (Trogamid T) Similar properties to nylon, but transparent.Hard, rigid, good chemical resistance.

PA 12-GF30 Nylon 12, 30% glass filled.

PA 66-GF25-V0 Nylon 66, 25% glass filled, self-extinguishing.

PBT - Polybutylene Terephthalate(when glass reinforced, Crastin�)

Good mechanical strength; resistant to abrasion; resistant to alcohols,oils, some acids, trichloroethylene.

PBT-GF30-V0 PBT, 30% glass filled, self-extinguishing.

POM - Polyoxymethylene / Polyacetal (Delrin�) High impact resistance; good mechanical strength; good resistance tooils, alcohols, alkalis, gasoline, xylene, toluene. Dielectric constant 3.7.

PP - Polypropylene Good mechanical strength. Resistant to acids. Temperature resistant.

PTFE - Polytetrafluoroethylene (Teflon�)* Optimum resistance against high temperature and chemicals; lowdielectric constant (2.0).

PUR - Polyurethane Elastic, resistant to abrasion, impact-resistant, oil- and grease-tolerant.

PVC - Polyvinylchloride Good mechanical strength, viscosity to impact; resistant to acids, alkalis.

PVDF - Polyvinylidenefluoride (Kynar�) Resistant to high and low temperatures, good resistance to chemicals(similar to PTFE), high mechanical strength.




Chemical Compatibility

ABS Trog. T PA 12 PBT POM PTFE PUR PVC PVDF 306 SS Brass Zinc PP

Ammonia, liquid B B A B C/D A C A A B D A A

Chlorine anhydrous liquid nd nd D D C A C D A C D nd D

De-ionized water nd nd A nd nd A nd A A A A nd A

Formic acid D D D A C A C A A A/B D D A

Gasoline D A A A A A A C A A A nd B

Hydrochloric acid <40% A A/B D A C A D B A D D D B

Hydrofluoric acid <50% C D D B D A C B A D D nd A

Methanol D D B A A A B A A A A A A

Phosphoric acid <40% B/C D B A D A D� B B D D D A

Potassium hydroxide<15%

A A C B B A C A A B D nd A

Sodium hydroxide <55% A A C B B A B A D B D D A

Sodium hypochlorite�13%

B nd B A C A B A A C D A A

Sulfuric acid <75% B A D A D A C A A D D D A

Toluene D A A A A A C D A A A nd C

Trichloroethylene D A C A B A D D B A/B A A C

The information in this chart is derived from reputable industry sources and is to be used only as a guide in selecting materialssuitable for your application. TURCK does not warrant in any fashion that the information in this chart is accurate orcomplete, or that any material is suitable for any purpose.

Most ratings listed here apply to a 48-hour exposure period.Ratings: A - No effect B - Minor effect C - Moderate effect D - Severe effect

� - No specific data, but probable rating. nd - no data





Material Dielectric Constant

Epoxy resin 2.5 - 6

Ethanol 24

Ethyl bromide 4.9

Ethylene Chloride 10.5

Ethylene Dichloride 11.0

Ethylene glycol 38.7

Ethylene Oxide 14.0

Ferrous Oxide 14.2

Fired Ash 1.5

Flour 2.5 - 3.0

Formic Acid 59.0

Freon� R22 & 502, liquid 6.1

Gasoline 2.2

Glass 3.1 - 10

Glass, raw material 2.0 - 2.5

Glycerine 47

Hexane 1.9

Hydrochloric Acid 4.6

Hydrogen cyanide 95.4

Hydrogen peroxide 84.2

Ice, -5C 2.85

Ice, -18C 3.16

Isobutylamine 4.5

Lime, shell 1.2

Marble 8.0 - 8.5

Melamine resin 4.7 - 10.2

Methane, liquid 1.7

Methanol 33.6

Mica, white 4.5 - 9.6

Milk, powdered 3.5 - 4

Nitrobenzene 36

Neoprene 6 - 9

Industrial Products and their Dielectric Constants


ABS resin, pellet 1.5 - 2.5

Acetic Acid 4.1

Acetone 19.5

Acetyl bromide 16.5

Acrylic resin 2.7 - 4.5

Air 1.0

Alcohol, industrial 16 - 31

Alcohol, isopropyl 18.3

Ammonia 15 - 25

Aniline 5.5 - 7.8

Aqueous solutions 50 - 80

Asbestos 3.0

Ash (fly) 1.7

Bakelite 3.6

Barley powder 3.0 - 4.0

Benzene 2.3

Benzyl acetate 5

Butane 1.4

Cable sealing compound 2.5

Calcium carbonate 9.1

Carbon Dioxide 1.6

Carbon tetrachloride 2.2

Celluloid 3.0

Cellulose 3.2 - 7.5

Cement 1.5 - 2.1

Cement powder 5 - 10

Cereal 3 - 5

Charcoal 1.2 - 1.8

Chlorine, liquid 2.0

Coke 1.1 - 2.2

Corn 5 - 10

Ebonite 2.7 - 2.9




Industrial Products and their Dielectric Constants


Rubber 2.5 - 35

Salt 6.0

Sand 3 - 5

Shellac 2.0 - 3.8

Silicon dioxide 4.5

Silicone rubber 3.2 - 9.8

Silicone varnish 2.8 - 3.3

Soybean 2.8

Styrene resin 2.3 - 3.4

Sugar 3.0

Sugar, granulated 1.5 - 2.2

Sulfur 3.4

Sulfuric acid 84

Teflon�, PCTFE 2.3 - 2.8

Teflon, PTFE 2.0

Toluene 2.3

Trichloroethylene 3.4

Urea resin 6.2 - 9.5

Urethane 3.2

Vaseline 2.2 - 2.9

Vinyl Chloride 2.8

Water 48 - 88

Wax 2.4 - 6.5

Wood, dry 2 - 7

Wood, pressed board 2.0 - 2.6

Wood, wet 10 - 30

Xylene 2.4

Zinc Oxide 1.7

Zirconium Oxide 12.5

Zirconium Silicate 5.0


Nylon 4 - 5

Oil, for transformer 2.2 - 2.4

Oil, paraffin 2.2 - 4.8

Oil, peanut 3.0

Oil, petroleum 2.1

Oil, soybean 2.9 - 3.5

Oil, turpentine 2.2

Paint 5 - 8

Paraffin 1.9 - 2.5

Paper 1.6 - 2.6

Paper, hard 4.5

Paper, oil saturated 4.0

Perspex 3.2 - 3.5

Petroleum 2.0 - 2.2

Phenol 9.9 - 15

Phenol resin 4.9

Polyacetal (Delrin�) 3.6

Polyamide (nylon) 2.5

Polycarbonate 2.9

Polyester resin 2.8 - 8.1

Polyethylene 2.3

Polypropylene 2.0 - 2.3

Polystyrene 3.0

Polyvinyl Chloride resin 2.8 - 3.1

Porcelain 4.4 - 7

Press board 2 - 5

Propane, liquid 1.6

Propylene, liquid 11.9

Quartz glass 3.7

Rice, dry 3.5





Mounting

Figure 9

Figure 10 Temperature Influence on Operating Distance

Most capacitive sensors manufactured by TURCK areembeddable, which ensures that the electric field is onlyeffective in front of the active face. They are suitable for flushmounting at the factory setting in any material (conductive &nonconductive).

When sensors are flush mounted, the effect on the operatingdistance is minimal and can be overcome by adjustment of thepotentiometer. Minimum separation distances must beobserved to avoid the possibility of interference between thetwo sensors’ fields.

Compensation Electrode

In practice, sensors can be affected by water droplets, humidity, dust, etc.,causing false outputs. To combat this effect each TURCK sensorincorporates a compensating electrode (C) which forms part of a negativefeedback circuit (Figure 9).

When contaminants are on the sensor face, they affect the sensor’s mainfield, as well as its compensation field. The negative feedback circuitdetects the increase in both fields, and can filter out the effects of thecontaminants.

When a large target comes into the sensor’s main field, the compensationfield is not affected, thus the negative feedback circuit can distinguish adifference between the two fields, and the sensor generates an output.

Temperature and Environmental Conditions

Figure 11

This distance (2xD) can vary depending on potentiometeradjustment




Operating Distance (Sensing Range) Considerations

The assured actuating range is between 0 and 72% of the rated operating distance. It is the range within which the correctoperation of the proximity sensor under specified voltage and temperature ranges is assured.

An earth-grounded square piece of carbon steel having a thickness of 1 mm (0.04 in) is used as a standard target todetermine the following operating tolerances. The length and width of the square is equal to three times the ratedoperating distance.

The operating distance is the distance at which the target approaching the sensing face along the reference axis causes theoutput signal to change.

The rated operating distance is a conventional quantity used to designate the operating distance. It does not take intoaccount either manufacturing tolerances or variations due to external conditions such as voltage and temperature.

The effective operating distance is the operating distance of an individual proximity sensor at a constant rated voltage and23°C (73°F). It allows for manufacturing tolerances.

The usable operating distance is the operating distance of an individual proximity sensor measured over the operatingtemperature range at 85% to 110% of its rated voltage. It allows for external conditions and for manufacturing tolerances.

The operating distance (S) of the different models is basically a function of the diameter of the sensing coil. Maximumoperating distance is achieved with the use of a standard or larger target. Rated operating distance (Sn) for each model isgiven in the manual.

Assured Operating Range = Sa 0 � Sa � 0.72Sn

Standard Target

Operating Distance = S

Rated Operating Distance = Sn

Effective Operating Distance = Sr 0.9 Sn � Sr � 1.1Sn

Usable Operating Distance = Su 0.72 Sn � Su � 1.32Sn

Figure 8




TURCKCapacitive Sensors

QF5.5

3-Wire DC10-30 VDC, Short-Circuit and Overload ProtectedNormally Open*, NPN (Sinking) or PNP (Sourcing)

Q-Pak™ Rectangular Sensors, PlasticPotted-In Cable

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC 5-QF5.5-AN6X2/S250BC10-QF5.5-AN6X2BC10-QF5.5-AN6X2/S250

�

�

�

51010

5.55.55.5

�

�

�

111

AAA

222

100100100

S2620120M2620121S2620119

2 meter cable,PUR jacket

BC 5-QF5.5-AP6X2/S250BC10-QF5.5-AP6X2BC10-QF5.5-AP6X2/S250

�

�

�

51010

5.55.55.5

�

�

�

111

BBB

222

100100100

M2620116M2620117M2620115

Sensor Selection

Two strap ties are included with sensor.Accessories and mounting devices can be found on pages 75 - 79.

AccessoriesHousing: Polypropylene

Material

* Normally Closed versions available upon request, consult factory.

UL Listed File #E210608




Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 15 mATime Delay Before Availability . . . . . . . . �15 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1,3,4,6,13 & IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power

SpecificationsA NPN (Sinking)

B PNP (Sourcing)

1





Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC 5-Q08-AN6X2BC 8-Q10-AN6X2/S250

�

�

58

810

�

�

11

AA

22

100100

M2620100M2621203

2 meter cable,PVC jacket; 24 AWGcopper conductors,PVC insulated.

BC 5-Q08-AP6X2BC 8-Q10-AP6X2/S250

�

�

58

810

�

�

11

BB

22

100100

M2620000M2621200

BC 5-Q08-AN6X2-V1131BC 8-Q10-AN6X2-V1131/S250

�

�

510

814

�

�

23

CC

22

100100

M2621100M2530011

picofast

Mating Cordsets:Q08: PKG 3Z-2(2 meter)Q10: PKG 3M-2(2 meter)For other stylesconsult ”Cordsets”catalog.

BC 5-Q08-AP6X2-V1131BC 8-Q10-AP6X2-V1131/S250

�

�

510

814

�

�

23

DD

22

100100

M2621000M2530002

Sensor Selection

Q10

3-Wire DC picofast �

10-30 VDC, Short-Circuit and Overload ProtectedNormally Open*, NPN (Sinking) or PNP (Sourcing)

Q-Pak™ Rectangular Sensors, Metal and PlasticQ08: Metal HousingQ10: Plastic HousingPotted-In Cable and Quick Disconnect

Accessories and mounting devices can be found on pages 75 - 79.

AccessoriesConnector: Chrome Plated BrassMetal Housing Q08: Die-cast ZincPlastic Housing Q10: PBT-GF30-V0Sensing Face: (Q08 only) PA 12-GF30 Plastic

Material

Q08






Wiring DiagramsRipple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 15 mATime Delay Before Availability . . . . . . . . �15 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1,3,4,6,13 & IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

C NPN (Sinking)

D PNP (Sourcing)

A NPN (Sinking)

B PNP (Sourcing)

Dimensions

4

21

3





3-Wire DC picofast �


Q-Pak™ Rectangular Sensors, PlasticPotted-In Cable and Quick Disconnect

Q14


AccessoriesConnector: Chrome Plated BrassHousing: PBT-GF30-V0 Plastic

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC10-Q14-AN4X2BC10-Q14-AN4X2/S400**

�

�

1010

1414

�

�

11

AA

22

100100

M2530010M2530005

2 meter cable,PVC jacket; 24 AWGcopper conductors,PVC insulated.

BC10-Q14-AP4X2BC10-Q14-AP4X2/S400**

�

�

1010

1414

�

�

11

BB

22

100100

M2530001M2530003

BC10-Q14-AN4X2-V1131BC10-Q14-AN4X2-V1131/S400**

�

�

1010

1414

�

�

22

CC

22

100100

M2530011M2530006

picofast

Mating Cordsets:PKG 3M-2 (2 meter)For other stylesconsult”Cordsets” catalog.

BC10-Q14-AP4X2-V1131BC10-Q14-AP4X2-V1131/S400**

�

�

1010

1414

�

�

22

DD

22

100100

M2530002M2530004

Sensor Selection

* Normally Closed versions available upon request, consult factory.** /S400 Designates rear LED location on back of sensor opposite front face.





Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 15 mATime Delay Before Availability . . . . . . . . �15 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1,3,4,6,13 & IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

1

C NPN (Sinking)

D PNP (Sourcing)

A NPN (Sinking)

B PNP (Sourcing)

2





Q20

3-Wire DC eurofast �




AccessoriesConnector: Chrome Plated BrassPlastic Housing: PBT-GF30-V0

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC20-Q20-AN4X2BC20-Q20-AN4X2/S400**

�

�

2020

2020

�

�

11

AA

22

100100

M2530110M2530104

2 meter cable,PUR jacket; 24 AWGcopper conductors,PVC insulated.

BC20-Q20-AP4X2BC20-Q20-AP4X2/S400**

�

�

2020

2020

�

�

11

BB

22

100100

M2530100M2530102

BC20-Q20-AN4X2-H1141BC20-Q20-AN4X2-H1141/S400**

�

�

2020

2020

�

�

22

CC

22

100100

M2530111M2530105

eurofast

Mating CordsetsRK 4T-2 (2 meter)For other stylesconsult”Cordsets” catalog.

BC20-Q20-AP4X2-H1141BC20-Q20-AP4X2-H1141/S400**

�

�

2020

2020

�

�

22

DD

22

100100

M2530101M2530103

Sensor Selection

* Normally Closed versions available upon request, consult factory.** /S400 Designates rear LED location on back of sensor opposite front face.




2

D PNP (Sourcing)

C NPN (Sinking)

Wiring DiagramsA NPN (Sinking)

B PNP (Sourcing)

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 15 mATime Delay Before Availability . . . . . . . . �15 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1,3,4,6,13 & IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

1





4-Wire DC10-65 VDC, Short-Circuit and Overload ProtectedComplementary Outputs: One N.O., One N.C. (SPDT)

Limit Switch Style Sensor, Plastic Housingcombiprox �

CP40

Housing: PBT-GF30-V0 PlasticSensing Face: PBT-GF30-V0 Plastic

Material

For minifast connector: Add “-B1141“ suffix to part number.Suggested cordset: RKM 40-2M; other styles in “Cordsets” catalog.For eurofast connector: Add ”-H1141” suffix to part number.Suggested cordset: RK 4.4T-2; other styles in “Cordsets” catalog.

Quick Disconnect Option

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC20-CP40-VN4X2 � 20 40 � 1 A 2 100 M2515700 TerminalChamber

with quick disconnectoption (see below).

BC20-CP40-VP4X2 � 20 40 � 1 B 2 100 M2515600

Sensor Selection


Accessories




Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mA typicalContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . �10 mATime Delay Before Availability . . . . . . . . �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . IncorporatedWire-Break Protection . . . . . . . . . . . . IncorporatedTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

1

Note: By removing sensor from terminal chamber, head can be adjusted to nine different sensing positions.

B PNP (Sourcing)

A NPN (Sinking)






Long Range SensorsModular Construction, Plastic

CP80

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

Rem

ote

Pot.

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

NC50-CP80-VN4X2 50 80 � 1 A 2 200 M2580112 TerminalChamber

with quickdisconnect option(see below).

NC50-CP80-VP4X2 50 80 � 1 B 2 200 M2580212

Sensor Selection

Housing: PBT-GF30-V0 PlasticTerminal Chamber Cover: Trogamid T

MaterialAccessories and mounting devices can be found on pages 75 - 79.

Accessories



Optional remote potentiometer available. Consult factory.




Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20 (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mALeakage (Off-State) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 10.0-15.0 mATime Delay Before Availability . . . . . . . . �25 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . IncorporatedWire-Break Protection . . . . . . . . . . . . IncorporatedTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

B PNP (Sourcing)

A NPN (Sinking)

1







12 and 18 mm Threaded Barrel, Metal and PlasticMolded Connector

M Barrel

M Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PA Hot Melt

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC 3-M12-AN6X-0.2M-RS 4TBC 5-M18-AN4X-0.2M-RS 4T

�

�

35

�

�

�

�

13

AA

11

100100

M2601190M2504091

eurofast

Cable pigtail withmolded connector,0.2 m length

Mating Cordsets:RK 4T-2 (2 meter)For other stylesconsult “Cordsets”catalog.

BC 3-M12-AP6X-0.2M-RS 4TBC 5-M18-AP4X-0.2M-RS 4T

�

�

35

�

�

�

�

13

BB

11

100100

M2601091M2504090

BC 3-S12-AN6X-0.2M-RS 4TBC 5-S18-AN4X-0.2M-RS 4T

�

�

35

�

�

�

�

24

AA

11

100100

M2601390M2503192

BC 3-S12-AP6X-0.2M-RS 4TBC 5-S18-AP4X-0.2M-RS 4T

�

�

35

�

�

�

�

24

BB

11

100100

M2601291M2503492

Sensor Selection


Accessories

S Barrel






Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 6.0-12.0 mATime Delay Before Availability . . . . . . . . �8 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 4, 6, 13 and IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications Wiring Diagrams

B PNP (Sourcing)

A NPN (Sinking)

21

43







30 mm Threaded Barrel, MetalQuick Disconnect


AccessoriesBarrel: M: Chrome Plated BrassConnector: Chrome Plated BrassSensing Face: PA 12-GF30 PlasticEnd Cap: PA 66-GF25-V0 Plastic

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC10-M30-AN4X-H1141 � 10 � � 1 A 1 100 M2501300 eurofast

Mating Cordsets:RK 4T-2 (2 meter)Forother styles consult”Cordsets” catalog.

BC10-M30-AP4X-H1141 � 10 � � 1 B 1 100 M2501200

Sensor Selection

M Barrel





A NPN (Sinking)

Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . �12.0 mATime Delay Before Availability . . . . . . . . �25 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

1

B PNP (Sourcing)






10-65 VDC, Short-Circuit and Overload ProtectedNormally Open or Complementary (N.O. and N.C.), NPN or PNP

30 mm Threaded Barrel, Metal and PlasticQuick Disconnect

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC10-M30-VN4X-H1141 � 10 � � 1 A 1 100 M2502120 eurofast

Mating Cordsets:RK 4.4T-2(2 meter)For other stylesconsult ”Cordsets”catalog.

BC10-M30-VP4X-H1141 � 10 � � 1 B 1 100 M2502010

BC10-S30-VN4X-H1141 � 10 � � 2 A 1 100 M2506010

BC10-S30-VP4X-H1141 � 10 � � 2 B 1 100 M2506100

Sensor Selection


AccessoriesBarrel: M: Chrome Plated Brass; S: PA 12-GF30Connector: Chrome Plated BrassSensing Face: PA 12-GF30 PlasticEnd Cap: PA 66-GF25-V0 Plastic

Material

S Barrel

M Barrels




Wiring Diagrams

Dimensions

2

B PNP (Sourcing)


SpecificationsA NPN (Sinking)

1







34 mm Smooth Barrel, PlasticQuick Disconnect

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)N

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC15-K34-AN4X-H1141** � 15 � 1 A 1 100 M2502125 eurofast

Mating Cordsets:RK 4T-2 (2 meter)For other styles consult”Cordsets” catalog.

BC15-K34-AP4X-H1141** � 15 � 1 B 1 100 M2502126

Sensor Selection


AccessoriesBarrel: PBT-GF30-VOConnector: Chrome Plated BrassSensing Face: PBT-GF30-VOEnd Cap: PBT-GF30-VO

Material

K Barrel

* Normally Closed versions available upon request, consult factory.** BS-34.1 mounting bracket included with sensor.




A NPN (Sinking)

Wiring Diagrams

Dimensions


Specifications

1

B PNP (Sourcing)






12 mm Threaded Barrel, Metal and PlasticPotted-In Cable

M Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PA Hot Melt

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC 3-M12-AN6X � � � 1 A 1 100 M2601100 2 meter cable,PVC jacket, 22 AWGcopper conductors,PVC insulated.

BC 3-M12-AP6X � 3 � � 1 B 1 100 M2601000

BC 3-S12-AN6X � 3 � � 2 A 1 100 M2601300

BC 3-S12-AP6X � 3 � � 2 B 1 100 M2601200

Sensor Selection


Accessories

S Barrel

M Barrel






Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 6.0-12.0 mATime Delay Before Availability . . . . . . . . �8 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 4, 6, 13 and IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

1 2

B PNP (Sourcing)

A NPN (Sinking)

Wiring Diagrams







Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC 5-M18-AN4X � 5 � � 1 A 1 100 M2504002 2 meter cable,PVC jacket, 22 AWGcopper conductors,PVC insulated.

BC 5-M18-AP4X � 5 � � 1 B 1 100 M2504001

BC 5-S18-AN4XBCF 5-S18-AN4X

�

�

55

�

�

�

�

22

AA

11

100100

M2503100M2503012

BC 5-S18-AP4XBCF 5-S18-AP4X

�

�

55

�

�

�

�

22

BB

11

100100

M2503000M2503011

Sensor Selection


AccessoriesM Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PUR Plastic

Material

M Barrel

S Barrel





Wiring Diagrams

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . 6.0-12.0 mATime Delay Before Availability . . . . . . . . �25 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

B PNP (Sourcing)

A NPN (Sinking)

1 2

Note: See additional specifications for BCF versions located on page 5.







M Barrel

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC10-M30-VN4X � 10 � � 1 A 1 100 M2502100 2 meter cable,PVC jacket, 22 AWGcopper conductors,PVC insulated.

BC10-M30-VP4X � 10 � � 1 B 1 100 M2502000

BC10-S30-VN4X � 10 � � 2 A 1 100 M2506000

BC10-S30-VP4X � 10 � � 2 B 1 100 M2506110

BCF10-S30-VN4X � 10 � � 2 A 1 100 M2506011

BCF10-S30-VP4X � 10 � � 2 B 1 100 M2506111

Sensor Selection


AccessoriesM Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PA 66-GF25-V0 Plastic

Material

S Barrel




Wiring Diagrams

Dimensions


Specifications

1

B PNP (Sourcing)

A NPN (Sinking)

2

Note: See additional specifications for BCF versions located on page 5.





4-Wire DC10-65 VDC, Short-Circuit and Overload ProtectedNormally Open or Complementary (N.O. and N.C.), NPN or PNP

34 mm Smooth Barrel, PlasticPotted-In cable

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)N

PN(S

inki

ng)

PNP

(Sou

rcin

g)D

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC15-K34-VN4X* � 15 � 1 A 1 100 M2502127 2 meter cable,PVC jacket, 22 AWGcopper conductors,PVC insulated

BC15-K34-VP4X* � 15 � 1 B 1 100 M2502124

Sensor Selection


AccessoriesBarrel: PBT-GF30-VOSensing Face: PBT-GF30-VOEnd Cap: PA 66-GF25-V0 Plastic

Material

K Barrel

* BS-34.1 mounting bracket included with sensor.




Wiring Diagrams

Dimensions


Specifications

B PNP (Sourcing)

A NPN (Sinking)

1





3-Wire DC10-65 VDC, Short-Circuit and Overload ProtectedNormally Open, PNP (Sourcing)

18 mm Self-Sealing Threaded PVDF BarrelPotted-In Cable

S185 Barrel

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel

Dia

met

er(m

m)

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC 5-S185-AP4X � 5 18 � 1 A 1 100 M2503500 2 meter cable,PVC jacket, 21 AWGcopper conductors,PVC insulated.

BC10-PT30-VN4X2 � 10 30 � 2 B 2 100 M2507020 2 meter cable,PVDF jacket, 22AWG copperconductors, PVCinsulated, withaluminized polyestershield and drain wire(not connected atsensor).

BC10-PT30-VP4X2 � 10 30 � 2 C 2 100 M2507010

NC20-KT34-VN4X2 20 33.5 � 3 B 2 100 M2550100

NC20-KT34-VP4X2 20 33.5 � 3 C 2 100 M2550300

Sensor Selection

PT30 Barrel

KT34 Barrel


PVDF Barrel with Potted-In PVDF CablePT30: 30 mm Threaded Barrel; KT34: 34 mm Smooth Barrel


AccessoriesBarrel: PVDF PlasticSensing Face: PVDF PlasticEnd Cap (S185): PUR PlasticCable Gland (PT/KT): PVDF with Viton� Gasket

Material




Wiring DiagramsRipple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . S185/KT: 2-20% (5% typical); PT: 5-20%Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . S185/KT: 6.0-12.0 mA; PT: �15 mATime Delay Before Availability . . . . . . . . S185/KT: �25 ms; PT: �15 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1,3,4,6,13 and IEC IP 67Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . �20%Temperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

SpecificationsA PNP (Sourcing)

B NPN (Sinking)

C PNP (Sourcing)

Dimensions1

3

2






30 mm threaded Barrel, PlasticIntegral Terminal Chamber and Optional Remote Potentiometer

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel D

iam

. (m

m)

Rem

ote

Pot.

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC10-P30SR-VN4X2 � 10 30 � 1 A 2 100 M2505100 TerminalChamber


BC10-P30SR-VP4X2BC10-P30SR-VP4X2/S359-2M

�

�

1010

3030 �

�

�

12

BB

22

100100

M2505000M2505001

Sensor Selection

P30SR Barrel

Accessories and mounting devices can be found on pages 75 - 79.PG 9 cable gland included with sensor.

Accessories



Terminal Chamber: ABS PlasticBarrel: ABS PlasticSensing Face: ABS Plastic

Material




B PNP (Sourcing)

A NPN (Sinking)

Wiring Diagrams

1

Dimensions

Ripple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . �12.0 mATime Delay Before Availability . . . . . . . . P30SR style: �25 ms; K40SR style: �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

2






34 and 40 mm Smooth Barrel, PlasticIntegral Terminal chamber

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel D

iam

. (m

m)

Rem

ote

Pot.

NPN

(Sin

king

)PN

P(S

ourc

ing)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC15-K34SR-VN4X2BC20-K40SR-VN4X2 *

� 1520

3440

� 12

AA

22

100100

M2502128M2510100

TerminalChamber


BC15-K34SR-VP4X2BC20-K40SR-VP4X2 *

� 1520

3440

� 12

BA

22

100100

M2502129M2510000

Sensor Selection

K34SR Barrel


Accessories



Terminal Chamber: K40SR: ABS Plastic, K34SR: PBT-GF30-VOBarrel: K40SR: ABS Plastic, K34SR: PBT-GF30-VOSensing Face: K40SR: ABS Plastic, K34SR: PBT-GF30-VO

Material

* BS-40 mounting clamp included with sensor.

K40SR Barrel




B PNP (Sourcing)

A NPN (Sinking)

Wiring DiagramsRipple . . . . . . . . . . . . . . . . . . . . �10%Differential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �1.8 V at 200 mATrigger Current for Overload Protection . . . �220 mAContinuous Load Current . . . . . . . . . . �200 mAOff-State (Leakage) Current . . . . . . . . . <100 �ANo-Load Current . . . . . . . . . . . . . . �12.0 mATime Delay Before Availability . . . . . . . . P30SR style: �25 ms; K40SR style: �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Reverse Polarity Protection . . . . . . . . . YesWire-Break Protection . . . . . . . . . . . . YesTransient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�20% of Rated Operating DistanceLED On (Yellow) . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

Specifications

Dimensions

1 2





2-Wire AC20-250 VACNormally Open (AZ3X) or Normally Closed (RZ3X)


Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

Nor

mall

yO

pen

Nor

mall

yCl

osed

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC20-Q20-AZ3X2BC20-Q20-AZ3X2/S400

�

�

2020

2020

�

�

11

AA

22

2020

M4352000M2310005

2 meter cable,PVC jacket, 22 AWGcopper conductors,PVC insulated.

BC20-Q20-RZ3X2BC20-Q20-RZ3X2/S400

�

�

2020

2020

�

�

11

BB

22

2020

M4352001

* /S400 Designates rear LED location on back of sensor opposite front face.

Sensor Selection

Q20

Connector: Chrome Plated BrassHousing: PBT-GF30-VO Plastic


Accessories




Line Frequency . . . . . . . . . . . . . . . 40-60 HzHysteresis (Differential Travel) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �7.0 V at 500 mAContinuous Load Current . . . . . . . . . . �500 mAOff-State (Leakage) Current . . . . . . . . . �1.7 mAMinimum Load Current . . . . . . . . . . . �5.0 mAInrush Current . . . . . . . . . . . . . . . . �8.0 A (�10 ms, 5% Duty Cycle)Time Delay Before Availability . . . . . . . . �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Transient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�10% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications Wiring DiagramsA Normally Open

Dimensions

1

B Normally Closed





2-Wire AC20-250 VACConnection Programmable; Normally Open or Normally Closed

Limit Switch Style Sensor, Plastic HousingCombiprox ®

CP40

An electrical shock hazard exists inside of terminalchamber style sensors whenever power is applied.Remove all power to the sensor whenever sensor wiringis exposed.

Caution

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gD

iam

eter

(mm

)N

orm

ally

Ope

nN

orm

ally

Clos

edD

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC20-CP40-FZ3X2 � 20 40 � � 1 A 2 20 M2311500 TerminalChamber


Sensor Selection


AccessoriesHousing: PBT-GF30-V0 PlasticSensing Face: PBT-GF30-V0 Plastic

Material

For minifast connector: Add “-B1131“ suffix to part number.Suggested cordset: RKM 30-2M; other styles in “Cordsets” catalog.For microfast connector: Add ”-B3131” suffix to part number.Suggested cordset: KB 3T-2; other styles in “Cordsets” catalog.





Wiring Diagrams

Dimensions

Line Frequency . . . . . . . . . . . . . . . 40-60 HzDifferential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �7.0 V at 500 mAContinuous Load Current . . . . . . . . . . �500 mAOff-State (Leakage) Current . . . . . . . . . �1.7 mAMinimum Load Current . . . . . . . . . . . �5.0 mAInrush Current . . . . . . . . . . . . . . . . �8.0 A (�10 ms, 5% Duty Cycle)Time Delay Before Availability . . . . . . . . �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Transient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�10% of Rated Operating DistanceLED On (Red) . . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On

SpecificationsA Programmable

1

Note: By removing sensor from terminal chamber, head can be adjusted to nine different sensing positions.






Long Range SensorsModular Construction, Plastic

CP80

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gD

iam

eter

(mm

)N

orm

ally

Ope

nN

orm

ally

Clos

edD

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

NC50-CP80-FZ3X2 50 80 � � 1 A 2 20 M2310610 TerminalChamber


Sensor Selection

Housing: PBT-GF30-V0 PlasticTerminal Chamber Cover: Trogamid T

Material


Caution


Accessories






Dimensions

Wiring DiagramsLine Frequency . . . . . . . . . . . . . . . 40-60 HzDifferential Travel (Hysteresis) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �7.0 V at 500 mAContinuous Load Current . . . . . . . . . . �500 mAOff-State (Leakage) Current . . . . . . . . . �1.7 mAMinimum Load Current . . . . . . . . . . . �5.0 mAInrush Current . . . . . . . . . . . . . . . . �8.0 A (�10 ms, 5% Duty Cycle)Time Delay Before Availability . . . . . . . . �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Transient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�10% of Rated Operating DistanceLED On (Red) . . . . . . . . . . . . . . . . Output EnergizedLED On (Green) . . . . . . . . . . . . . . . Power On


1





M Barrel

2-Wire AC microfast �

20-250 VACNormally Open (AZ3X) or Normally Closed (RZ3X)

18 and 30 mm Threaded Barrel, Metal and PlasticQuick Disconnect and Optional Molded Connector

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

orm

ally

Ope

nN

orm

ally

Clos

edD

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC 5-M18-AZ3X-0.2M-SB 3TBC10-M30-AZ3X-B3131

�

�

510

�

�

�

�

13

AA

1 2020

M2305090M2310030

microfast

Cable pigtail withmolded connector,0.2 m length

Mating Cordsets:KB 3T-2 (2 meter)For other stylesconsult ”Cordsets”catalog.

BC 5-M18-RZ3X-0.2M-SB 3TBC10-M30-RZ3X-B3131

�

�

510

�

�

�

�

13

BB

1 2020

M2305190M2310100

BC 5-S18-AZ3X-0.2M-SB 3TBC10-S30-AZ3X-B3131

�

�

510

�

�

�

�

24

AA

1 2020

M2305590M2310710

BC 5-S18-RZ3X-0.2M-SB 3TBC10-S30-RZ3X-B3131

�

�

510

�

�

�

�

24

BB

1 2020

M2305490M2310810

Sensor Selection

M Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PUR Plastic


Accessories

S Barrel




Wiring Diagrams

Dimensions

B Normally Closed

A Normally OpenLine Frequency . . . . . . . . . . . . . . . 40-60 HzHysteresis (Differential Travel) . . . . . . . . 2-20% (5% typical)Voltage Drop Across Conducting Sensor . . . �7.0 V at 500 mAContinuous Load Current . . . . . . . . . . �500 mAOff-State (Leakage) Current . . . . . . . . . �1.7 mAMinimum Load Current . . . . . . . . . . . �5.0 mAInrush Current . . . . . . . . . . . . . . . . �8.0 A (�10 ms, 5% Duty Cycle)Time Delay Before Availability . . . . . . . . �60 msPower-On Effect . . . . . . . . . . . . . . . Per IEC 947-5-2Transient Protection . . . . . . . . . . . . . Per EN 60947-5-2Operating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesRepeatability. . . . . . . . . . . . . . . . . �2% of Rated Operating DistanceTemperature Drift . . . . . . . . . . . . . . <�10% of Rated Operating DistanceLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

2

1

3 4






18 and 30 mm Threaded Barrel, Metal and PlasticPotted-In Cable

M Barrel

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)M

etal

Barre

lPl

astic

Barre

lN

orm

ally

Ope

nN

orm

ally

Clos

edD

raw

ing

#W

iring

Dia

gram

#of

LED

sSw

itchi

ngFr

eque

ncy

(Hz)

IDN

umbe

r

Connection

BC 5-M18-AZ3XBC10-M30-AZ3X

�

�

510

�

�

�

�

13

AA

11

2020

M2305000M2310000


BC 5-M18-RZ3XBC10-M30-RZ3X

�

�

510

�

�

�

�

13

BB

11

2020

M2305100M2309800

BC 5-S18-AZ3XBC10-S30-AZ3X

�

�

510

�

�

�

�

24

AA

11

2020

M2305500M2310700

BC 5-S18-RZ3XBC10-S30-RZ3X

�

�

510

�

�

�

�

24

BB

11

2020

M2305400M2310800

Sensor Selection

S Barrel


AccessoriesM Barrel: Chrome Plated BrassS Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: PA 66-GF25-V0 Plastic

Material




Dimensions

B Normally Closed

A Normally Open

Wiring Diagrams


Specifications

3 4

1 2





K Barrel


Caution

Terminal Chamber: PBT-GF30-VOBarrel: PBT-GF30-VOSensing Face: PBT-GF30-VO

Material


34 mm Smooth Barrel, PlasticPotted-In Cable

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel D

iam

. (m

m)

Nor

mall

yO

pen

Nor

mall

yCl

osed

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC15-K34-AZ3X* � 15 34 � 1 A 1 20 M2310008 2 meter cable,PVC jacket, 21 AWGcopper conductors,PVC insulated.

BC15-K34-RZ3X* � 15 34 � 1 B 1 20 M2310110

Sensor Selection


Accessories

* BS-34.1 mounting bracket included with sensor.




Dimensions

B Normally Closed

A Normally Open

Wiring Diagrams


Specifications

1






Barrel, Plastic with Integral Terminal Chamber30 mm threaded barrel

P30SR Barrel

Terminal Chamber: ABS PlasticBarrel: ABS PlasticSensing Face: ABS Plastic

Material


Caution

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel D

iam

. (m

m)

Rem

ote

Pot.

Nor

mall

yO

pen

Nor

mall

yCl

osed

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC10-P30SR-FZ3X2 � 10 30 � � 1 A 2 20 M2310400 TerminalChamber


Sensor Selection


Accessories






Wiring Diagrams

Dimensions



1






Barrel, Plastic with Integral Terminal ChamberK34SR: 34 mm Smooth BarrelK40SR: 40 mm Smooth Barrel

K34SR Barrel

K40SR Barrel

* BS-40 mounting clamp included with sensor.** BS-34.1 mounting clamp included with sensor.


Caution

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel D

iam

. (m

m)

Rem

ote

Pot.

Nor

mall

yO

pen

Nor

mall

yCl

osed

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)ID

Num

ber

Connection

BC10-K34SR-FZ3X2**BC20-K40SR-FZ3X2*

�

�

1520

3440

�

�

�

�

12

AA

22

2020

M2310009M2310300

TerminalChamber


Sensor Selection


Accessories



Terminal Chamber: K40SR: ABS Plastic, K34SR: PBT-GF30-VOBarrel: K40SR: ABS Plastic, K34SR: PBT-GF30-VOSensing Face: K40SR: ABS Plastic, K34SR: PBT-GF30-VO

Material




21

Wiring Diagrams

Dimensions







2-Wire DC, Requires Remote Amplifier5-30 VDCVariable Resistance Output, NAMUR (EN 60947-5-6)

Rectangular Sensors, PlasticPotted-In Cable

QF5.5

* Factory Mutual approval applies only when used with Factory Mutual approved switching amplifiers.“/S250” Designates no potentiometer.

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)H

ousin

gH

eigh

t (m

m)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)FM

Appr

oved

Divi

sion

1*

Tim

eD

elay

Befo

re

Avai

labili

ty(m

s)ID

Num

ber

Connection

BC 5-QF5.5-Y0X/S250 � 5 5.5 1 A 1 100 � �0.5 M2030000 2 meter cable,PVC jacket, 21 AWGcopper conductors,PVC insulated.

Sensor Selection

NRTL/C

Two strap ties are included with sensor.Remote Amplifier required. Consult TURCK Automation Controls catalog.

AccessoriesHousing: Polypropylene Plastic

Material




A NAMUR Output

Wiring Diagram

Dimensions

Nominal Voltage. . . . . . . . . . . . . . . 8.2 (EN 50227)Resistance Change fromNonactivated to Activated Condition . . . . >8.0 k� to 1.0 k�Resulting Current Change . . . . . . . . . . �1.0 mA to �2.2 mARecommended Switching Point forRemote Amplifier . . . . . . . . . . . . . . 1.55 mAPower-On Effect . . . . . . . . . . . . . . . Realized in AmplifierReverse Polarity Protection . . . . . . . . . IncorporatedWire-Break Protection . . . . . . . . . . . . Realized in AmplifierTransient Protection . . . . . . . . . . . . . Realized in AmplifierOperating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

1





2-Wire DC, Requires Remote Amplifier5-30 VDCVariable Resistance Output, NAMUR (EN 60947-5-6)

18 and 30 mm Threaded Barrel, PlasticPotted-In Cable

S Barrel

Remote Amplifier required. Consult TURCK multimodul and MZ-Seriescatalogs.

Accessories

* Factory Mutual approval applies only when used with Factory Mutual approved switching amplifiers.

NRTL/C

Barrel: PA 12-GF30 PlasticSensing Face: PA 12-GF30 PlasticEnd Cap: S18: PUR; S30: PA66-GF25-V0 Plastic

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel

Dia

met

er(m

m)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)FM

Appr

oved

Divi

sion

1*

Tim

eD

elay

Befo

re

Avai

labili

ty(m

s)ID

Num

ber

Connection

BC 5-S18-Y0XBC10-S30-Y0X

�

�

510

1830

12

AA

11

100100

�

�

�0.5�0.5

M2006000M2010000


Sensor Selection




A NAMUR Output

Wiring Diagram

Dimensions

Nominal Voltage. . . . . . . . . . . . . . . 8.2 VDC (EN 50227)Resistance Change fromNonactivated to Activated Condition . . . . >8.0 k� to 1.0 k�Resulting Current Change . . . . . . . . . . �1.0 mA to �2.2 mARecommended Switching Point forRemote Amplifier . . . . . . . . . . . . . . 1.55 mAPower-On Effect . . . . . . . . . . . . . . . Realized in AmplifierReverse Polarity Protection . . . . . . . . . IncorporatedWire-Break Protection . . . . . . . . . . . . Realized in AmplifierTransient Protection . . . . . . . . . . . . . Realized in AmplifierOperating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

21





2-Wire DC, Requires Remote Amplifier5-30 VDCVariable Resistance Output, NAMUR (EN 50227)

30 mm Threaded PVDF BarrelPotted-In Cable

PT Barrel

* Factory Mutual approval applies only when used with Factory Mutual approved switching amplifiers.

NRTL/C

Barrel: PVDF PlasticSensing Face: PVDF PlasticEnd Cap: PVDF PlasticCable Gland: PVDF with Viton� gasket

Material

Part Number Embe

ddab

leRa

ted

Ope

ratin

g

Dist

ance

(mm

)Ba

rrel

Dia

met

er(m

m)

Dra

win

g#

Wiri

ngD

iagr

am#

ofLE

Ds

Switc

hing

Freq

uenc

y(H

z)FM

Appr

oved

Divi

sion

1*

Tim

eD

elay

Befo

re

Avai

labili

ty(m

s)ID

Num

ber

Connection

BC10-PT30-Y0X � 10 30 1 A 1 100 � �0.5 M2020000 2 meter cable, PVDFjacket, 22 AWGcopper conductors,PVC insulated, withaluminized polyestershield and drain wire(not connected atsensor).

Sensor Selection

Remote Amplifier required. Consult TURCK multimodul and AutomationControls catalogs.

Accessories




A NAMUR Output

Wiring Diagram

1

Nominal Voltage. . . . . . . . . . . . . . . 8.2 (EN 50227)Resistance Change fromNonactivated to Activated Condition . . . . >8.0 k� to 1.0 k�Resulting Current Change . . . . . . . . . . �1.0 mA to �2.2 mARecommended Switching Point forRemote Amplifier . . . . . . . . . . . . . . 1.55 mAPower-On Effect . . . . . . . . . . . . . . . Realized in AmplifierReverse Polarity Protection . . . . . . . . . IncorporatedWire-Break Protection . . . . . . . . . . . . Realized in AmplifierTransient Protection . . . . . . . . . . . . . Realized in AmplifierOperating Temperature . . . . . . . . . . . -25°C to +70°C (-13°F to +158°F)Enclosure . . . . . . . . . . . . . . . . . . Meets NEMA 1, 3, 12 and 13Shock . . . . . . . . . . . . . . . . . . . . 30 g, 11 msVibration . . . . . . . . . . . . . . . . . . 55 Hz, 1 mm Amplitude in all 3 PlanesLED On . . . . . . . . . . . . . . . . . . . Output Energized

Specifications

Dimensions




TURCKCapacitive Sensor Accessories

Threaded Tank Wells for Liquid Level Sensing Applications

PartNumber

IDNumber Material Thread

SizeDrillSize Capacitive Sensor Style

TWD-12S A5051 Delrin® 3/4-14 NPT 59/64 12 mm threaded

TWD-18S A5055 Delrin 3/4-14 NPT 59/64 18 mm threaded

TWT-18S A5050 Teflon® 3/4-14 NPT 59/64 18 mm threaded

TWD-18S-1 A5057 Delrin 1-11 1/2 NPT 1-5/32 18 mm threaded

TWT-18S-1 A5056 Teflon 1-11 1/2 NPT 1-5/32 18 mm threaded

TWD-30S A5065 Delrin 1 1/4-11 1/2 NPT 1-1/2 30 mm threaded

TWT-30S A5060 Teflon 1 1/4-11 1/2 NPT 1-1/2 30 mm threaded

TWD-40S A5075 Delrin 1 1/2-11 1/2 NPT 1-47/64 40 mm smooth

TWT-40S A5070 Teflon 1 1/2-11 1/2 NPT 1-47/64 40 mm smooth

Pressure Rating: 150 PSI

TWD-40STWT-40S

TWD-30STWT-30S

TWD-12S TWD-18..TWT-18..




Bolt-on Tank Wells for Liquid Level Applications

PartNumber

IDNumber

DimensionA

TWU-30B A5005 1.18130.0

TWU-40B A5000 1.57540.0

Material: UHMW/PEPressure Rating: 80 PSI

For use with 30 and 40 mm barrel sensors.

Sight Glass Mount

PartNumber

IDNumber A B C D

TSG-12 A2500 1.7544.5

1.2531.8

12 mmthreaded ornon-threaded

0.37-0.819.40-20.6

TSG-18 A2501 1.9048.3

1.4837.5


0.63-1.1216.0-28.4

TSG-30 A2502 3.4587.6

2.0050.8


1.00-1.7525.4-44.5





PartNumber

IDNumber

LSAP-2 M6942900

Material: Stainless Steel

For use with limit switch style sensors.

Mounting Brackets

PartNumber

IDNumber

BarrelDiameter

Dimensions

A B C D E F G H J K L M N P SLOTS

MB-12 A3130 12 MM 1.6341.5

0.8722.2

2.5063.5

1.2531.8

0.6115.5

0.317.9

1.8847.8

0.5012.7

0.061.5

0.359.0

0.8722.0

0.4511.5

1.0226.0

1.1328.7

0.22 x 0.735.6 x 18.6

MB-18 A3135 18 mm 1.6341.5

0.7920.0

2.5063.5

1.2531.8

0.6115.5

0.317.9

1.8847.8

0.7519.1

0.061.5

0.359.0

0.8722.0

0.4511.5

1.0426.3

1.1529.1

0.22 x 0.755.6 x 19.0

MB-30 A3140 30 mm 2.6266.5

1.3233.5

4.25108.0

1.7544.5

0.8822.4

0.379.5

3.5088.9

1.1930.2

0.071.8

0.6316.0

1.1429.0

1.1830.0

1.5439.0

2.0652.2

0.28 x 1.257.1 x 31.8

MB-18 Material: 16 Gage Cold Roll SteelMB-12, MB-30 Material: 14 Gage Cold Roll SteelFinish: Galvanized

For use with 12, 18 and 30 mm barrel sensors.




Mounting Brackets

PartNumber

IDNumber

MB-Q14/Q20 A3147


For use with Q14 and Q20 style sensors.

PartNumber

IDNumber

MB-Q08/Q10 A3563


For use with Q08 and Q10 style sensors.





PVDF Mounting Clamp

Plastic Mounting Clamp

PartNumber

IDNumber

BarrelDiameter Material Screws - 316 Stainless Steel Included.

BS-34.1-WMS is optional front wall mounting screw set forBS-34.1.BS-34 M6946300 34 mm PVDF

BS-34.1 M6946010 34 mm PBT

For use with 34 mm smooth plastic and PVDF barrel sensors.

PartNumber

IDNumber

BarrelDiameter

BS-40 M6946600 40 mm

Material:Bracket - PBTScrews - Galvanized Zinc(2) M5x50 Cap Screws Included

For use with 40 mm smooth plastic barrel sensors.




BC 3-M12-AN6X . . . . . . . . . . . . 39BC 3-M12-AN6X-0.2M-RS 4T . . . . . . . 31BC 3-M12-AP6X . . . . . . . . . . . . 39BC 3-M12-AP6X-0.2M-RS 4T . . . . . . . 31

BC 3-S12-AN6X . . . . . . . . . . . . 39BC 3-S12-AN6X-0.2M-RS 4T . . . . . . . 31BC 3-S12-AP6X . . . . . . . . . . . . 39BC 3-S12-AP6X-0.2M-RS 4T . . . . . . . 31

BC 5-M18-AN4X . . . . . . . . . . . . 41BC 5-M18-AN4X-0.2M-RS 4T . . . . . . . 31BC 5-M18-AP4X . . . . . . . . . . . . 41BC 5-M18-AP4X-0.2M-RS 4T . . . . . . . 31

BC 5-M18-AZ3X . . . . . . . . . . . . 61BC 5-M18-AZ3X-0.2M-SB 3T . . . . . . . 59BC 5-M18-RZ3X . . . . . . . . . . . . 61BC 5-M18-RZ3X-0.2M-SB 3T . . . . . . . 59

BC 5-Q08-AN6X2 . . . . . . . . . . . . 21BC 5-Q08-AN6X2-V1131 . . . . . . . . . 21BC 5-Q08-AP6X2 . . . . . . . . . . . . 21BC 5-Q08-AP6X2-V1131 . . . . . . . . . 21

BC 5-QF5.5-AN6X2/S250 . . . . . . . . 19BC 5-QF5.5-AP6X2/S250 . . . . . . . . 19BC 5-QF5.5-Y0X/S250 . . . . . . . . . 69BC 5-S185-AP4X . . . . . . . . . . . . 47

BC 5-S18-AN4X . . . . . . . . . . . . 41BC 5-S18-AN4X-0.2M-RS 4T . . . . . . . 31BC 5-S18-AP4X . . . . . . . . . . . . 41BC 5-S18-AP4X-0.2M-RS 4T . . . . . . . 31

BC 5-S18-AZ3X . . . . . . . . . . . . 61BC 5-S18-AZ3X-0.2M-SB 3T . . . . . . . 59BC 5-S18-RZ3X . . . . . . . . . . . . 61BC 5-S18-RZ3X-0.2M-SB 3T . . . . . . . 59

BC 5-S18-Y0X . . . . . . . . . . . . . 71BC 8-Q10-AN6X2/S250 . . . . . . . . . 21BC 8-Q10-AN6X2-V1131/S250 . . . . . . 21BC 8-Q10-AP6X2/S250 . . . . . . . . . 21

BC 8-Q10-AP6X2-V1131/S250 . . . . . . 21BC10-K34SR-FZ3X2 . . . . . . . . . . . 67BC10-M30-AN4X-H1141 . . . . . . . . . 33BC10-M30-AP4X-H1141 . . . . . . . . . 33

BC10-M30-AZ3X . . . . . . . . . . . . 61BC10-M30-AZ3X-B3131 . . . . . . . . . 59BC10-M30-RZ3X . . . . . . . . . . . . 61BC10-M30-RZ3X-B3131 . . . . . . . . . 59

BC10-M30-VN4X . . . . . . . . . . . . 43BC10-M30-VN4X-H1141 . . . . . . . . . 35BC10-M30-VP4X . . . . . . . . . . . . 43BC10-M30-VP4X-H1141 . . . . . . . . . 35

BC10-P30SR-FZ3X2 . . . . . . . . . . . 65BC10-P30SR-VN4X2 . . . . . . . . . . . 49BC10-P30SR-VP4X2 . . . . . . . . . . . 49BC10-P30SR-VP4X2/S359-2M . . . . . . . 49

BC10-PT30-VN4X2 . . . . . . . . . . . 47BC10-PT30-VP4X2 . . . . . . . . . . . 47BC10-PT30-Y0X . . . . . . . . . . . . 73BC10-Q14-AN4X2 . . . . . . . . . . . . 23

BC10-Q14-AN4X2/S400 . . . . . . . . . 23BC10-Q14-AN4X2-V1131 . . . . . . . . . 23BC10-Q14-AN4X2-V1131/S400 . . . . . . 23BC10-Q14-AP4X2 . . . . . . . . . . . . 23

BC10-Q14-AP4X2/S400 . . . . . . . . . 23BC10-Q14-AP4X2-V1131 . . . . . . . . . 23BC10-Q14-AP4X2-V1131/S400 . . . . . . 23BC10-QF5.5-AN6X2 . . . . . . . . . . . 19

BC10-QF5.5-AN6X2/S250 . . . . . . . . 19BC10-QF5.5-AP6X2 . . . . . . . . . . . 19BC10-QF5.5-AP6X2/S250 . . . . . . . . 19BC10-S30-AZ3X . . . . . . . . . . . . 61

BC10-S30-AZ3X-B3131 . . . . . . . . . 59BC10-S30-RZ3X . . . . . . . . . . . . 61BC10-S30-RZ3X-B3131 . . . . . . . . . 59BC10-S30-VN4X . . . . . . . . . . . . 43

BC10-S30-VN4X-H1141 . . . . . . . . . 35BC10-S30-VP4X . . . . . . . . . . . . 43BC10-S30-VP4X-H1141 . . . . . . . . . 35BC10-S30-Y0X . . . . . . . . . . . . . 71

BC15-K34-AN4X-H1141 . . . . . . . . . 37BC15-K34-AP4X-H1141 . . . . . . . . . 37BC15-K34-AZ3X . . . . . . . . . . . . 63BC15-K34-RZ3X . . . . . . . . . . . . 63

BC15-K34SR-VN4X2 . . . . . . . . . . . 51BC15-K34SR-VP4X2 . . . . . . . . . . . 51BC15-K34-VN4X . . . . . . . . . . . . 45BC15-K34-VP4X . . . . . . . . . . . . 45

BC20-CP40-FZ3X2 . . . . . . . . . . . 55BC20-CP40-VN4X2 . . . . . . . . . . . 27BC20-CP40-VP4X2 . . . . . . . . . . . 27BC20-K40SR-FZ3X2 . . . . . . . . . . . 67

BC20-K40SR-VN4X2 . . . . . . . . . . . 51BC20-K40SR-VP4X2 . . . . . . . . . . . 51BC20-Q20-AN4X2 . . . . . . . . . . . . 25BC20-Q20-AN4X2/S400 . . . . . . . . . 25

BC20-Q20-AN4X2-H1141 . . . . . . . . . 25BC20-Q20-AN4X2-H1141/S400 . . . . . . 25BC20-Q20-AP4X2 . . . . . . . . . . . . 25BC20-Q20-AP4X2/S400 . . . . . . . . . 25

BC20-Q20-AP4X2-H1141 . . . . . . . . . 25BC20-Q20-AP4X2-H1141/S400 . . . . . . 25BC20-Q20-AZ3X2 . . . . . . . . . . . . 53BC20-Q20-AZ3X2/S400 . . . . . . . . . 53

BC20-Q20-RZ3X2 . . . . . . . . . . . . 53BC20-Q20-RZ3X2/S400 . . . . . . . . . 53BCF 5-S18-AN4X . . . . . . . . . . . . 41BCF 5-S18-AP4X . . . . . . . . . . . . 41

BCF10-S30-VN4X . . . . . . . . . . . . 43BCF10-S30-VP4X . . . . . . . . . . . . 43BS-34 . . . . . . . . . . . . . . . . 79BS-34.1 . . . . . . . . . . . . . . . 79

BS-40 . . . . . . . . . . . . . . . . 79LSAP-2 . . . . . . . . . . . . . . . . 77MB-12 . . . . . . . . . . . . . . . . 77MB-18 . . . . . . . . . . . . . . . . 77

MB-30 . . . . . . . . . . . . . . . . 77MB-Q08/Q10 . . . . . . . . . . . . . . 78MB-Q14/Q20 . . . . . . . . . . . . . . 78NC20-KT34-VN4X2 . . . . . . . . . . . 47

NC20-KT34-VP4X2 . . . . . . . . . . . 47NC50-CP80-FZ3X2 . . . . . . . . . . . 57NC50-CP80-VN4X2 . . . . . . . . . . . 29NC50-CP80-VP4X2 . . . . . . . . . . . 29

TSG-12 . . . . . . . . . . . . . . . . 76TSG-18 . . . . . . . . . . . . . . . . 76TSG-30 . . . . . . . . . . . . . . . . 76TWD-12S . . . . . . . . . . . . . . . 75

TWD-18S . . . . . . . . . . . . . . . 75TWD-18S-1 . . . . . . . . . . . . . . 75TWD-30S . . . . . . . . . . . . . . . 75TWD-40S . . . . . . . . . . . . . . . 75

TWT-18S . . . . . . . . . . . . . . . 75TWT-18S-1 . . . . . . . . . . . . . . 75TWT-30S . . . . . . . . . . . . . . . 75TWT-40S . . . . . . . . . . . . . . . 75

TWU-30B . . . . . . . . . . . . . . . 76TWU-40B . . . . . . . . . . . . . . . 76

Part Numbers





Notes:




TURCK Inc. sells its products through Authorized Distributors. These distributors provideour customers with technical support, service and local stock. TURCK distributors arelocated nationwide - including all major metropolitan marketing areas.

For Application Assistance or for the location of your nearest TURCK distributor, call:

1-800-544-PROX (1-800-544-7769)

Specifications in this manual are subject to change without notice. TURCK also reservesthe right to make modifications and makes no guarantee of the accuracy of theinformation contained herein.

Literature and Media questions or concerns?Contact Marketing Services at TURCK USA: [email protected]

New Literature from TURCK

Sensors B2000 Automation Controls B0154

EZ-Track B0310Pressure B0158 Flow & Temperature B0155

Cordsets B2001



EZ-TrackLDT’sProgrammable LinearDisplacement Transducersin a compact low profilehousing.

The Industry Leader in Proximity Sensing,Cordsets and Interface Technology

ProximitySensorsIndustry’s broadest lineof inductive andcapacitive proximitysensors

Cordsetsand JunctionsCordsets and junctionboxes for connection tomost popular switchand sensor styles.

FlowMonitorsMonitors for sensing theflow of liquids andgases during industrialprocesses.

InterfaceDevicesInterface and logicproducts for automationand intrinsically safeenvironments.

TURCK USA TURCK Canada TURCK MexicoTURCK Inc.3000 Campus DriveMinneapolis, MN 55441Phone: (763) 553-7300FAX: (763) 553-0708Application Support:1-800-544-PROX (7769)

CHARTWELLELECTRONICS, INC.140 Duffield DriveMarkham, OntarioCanada, L6G 1B5Phone: (905) 513-7100FAX: (905) 513-7101

ICESA - MODICONAnt. Camino a Sta. Monica No. 7San Lucas Tepetlacalco54050 TlalnepantlaEdo. de MexicoPhone: (52) 5-397 8644FAX: (52) 5-398 9888

Printed in USA B0149 1/02 REV A

Contact us or visit our websitefor our latest literature.

w w w . t u r c k . c o m

Sensor Productsemail: [email protected]

Cordset and Junction Productsemail: [email protected]

Intrinsic Safety Productsemail: [email protected]

PressureSensorsA complete lineof solid state,programmablepressure sensors.



capacitive sensors - steven engineering · 2005-02-01 · capacitive sensors work where others...

Documents