SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 1 of 9

SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch 198Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, Guangdong Province,China P.C:510663 Tel:86 020 82155555 Fax:86 020 82075008

INSPECTION REPORT

To : ORIENT LINK CO. (L.L.C.) Date: 19-OCT-2015

Att : JAISON VARGHESE

From : David- Zeng E-mail : David-hg.zeng@sgs.com

SGS File No.: HKCAN3177502 Product family view

Buyer : ORIENT LINK CO. (L.L.C.)

Supplier : ZHANJIANG CHENMING PULP & PAPER CO.,LTD

Manufacturer : ZHANJIANG CHENMING PULP & PAPER CO.,LTD

Style Number: Nil

Product description: Woodfree printing paper

P.O. Number: SAOL3339

L/C Number: BTD/M069631

Service performed : FRI

Inspection Date : From 16-Oct-2015 To 17-Oct-2015

Inspection Location : Zhanjiang, Guangdong, China

Inspection Criteria

Reference sample provided by Not Available

Client instruction/specification Yes

SGS WI number P-INSP-WI-HL-103

Other Nil

Overall Inspection Conclusion: Subject to client's evaluation

Inspection Summary:

1. Quantity : Conform

2. Style, color : Subject to client's evaluation

3. Workmanship appearance / function : Conform

4. Data measurement / field tests: Subject to client's evaluation

5. Packing : Subject to client's evaluation

6. Marking / label : Subject to client's evaluation

Problem Remark:

-Samples were not randomly selected due to the products were too heavy to move.

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 2 of 9

Inspector: Yunshan Peng Factory Representative: Ms. Liu

1. Quantity: Conform

Style / Item/ Article

P.O. No. Order Qty. Inspection Qty.

(Presented Qty. for insp.) Number of Cartons

Packed Not Packed Packed Not packed

/ SAOL3339 35 pallets 35 pallets 0 35 pallets 0

Total: 35 pallets 35 pallets 0 35 pallets 0

2. Style & Color Conformity: Subject to client's evaluation

Comments: -No reference sample for comparison

3. Workmanship Appearance / Functional Inspection Findings: Within AQL

Inspection Method Applied: ANSI / ASQ Z1.4- 2008, Single sampling plans for normal inspection, Level II Sample size: 500sheets Acceptance Quality Limit (AQL) for: Critical: N/A Major: 2.5 Minor: 4.0

Defect description Critical Major Minor

Black spot on paper sheet 0 0 2

Total defectives: 0 0 2

Maximum allowed: 0 21 21

4. Product-Specific Data Measurement / Field Test on Reduced Sample Size: Subject to client's evaluation

Check points Qty Test Result Specification/Tolerance

Barcode scanned All Correct CODE-128

Size of sheet 8

Item 1 764x1018, 764x1018, 764x1018, 764x1018, 764x1018, 764x1018,

764x1018, 764x1018mm

30x40inches (762x1016mm)

Item 2 640x901, 640x901, 640x901, 640x901, 640x901, 640x901,

640x901, 640x901mm 64x90cm

Size and weight of ream 8 Item 1 76.6x102x5.9cm/39kg

/ Item 2 64.2x90.3x5.9cm/29kg

Size and weight of pallet 8 Item 1 103.5x77.5x107cm/641kg

/ Item 2 92x66x107.5cm/478kg

SUBSTANCE 8 100.4, 99.0, 99.4, 100.7, 98.9, 101.5, 100.2,

99.6GSM 100+/-2.5%GSM

WATER ABSORPTION 8 24.6, 24.3, 24.1, 24.6, 24.8, 24.5, 24.2,

24.5G/M2 MAXIUM 25G/M2

BRIGHTLNESS 8 101.2, 99.3, 100.4, 101.1, 99.6, 100.8, 99.4,

100.7% MINIMUM ISO 85%

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 3 of 9

OPACITY 8 97.2, 97.7, 98.3, 97.4, 97.9, 98.2, 98.0, 97.7% MINIMUM ISO 90%

TENSILE INDEX-MACHINE DERECTION

8 79.5, 78.1, 78.9, 78.7, 79.3, 79.8, 77.8,

78.3NM/G MINIMUM 35NM/G

TENSILE INDEX-CROSS DERECTION

8 33.3, 31.1, 33.4, 32.0, 30.1, 32.4, 31.3,

32.7NM/G MINIMUM 20NM/G

QUALITY A. WOOD FREE

B. SURFACE SIZED YES

GRAIN DERECTION PARALLEL TO LONG SIDE YES

WAX PICK WALUE 10A CLEAR Minimum 10A clear

-The red color in the field test is required to write down by the client, Inspector cannot identify these during inspection. -All field testing were carried in factory lab by their operators. SGS inspector witnessed the process and made record. Data for reference only. 5. Packing:

5.1 Individual packing conformity : Subject to client's evaluation Comments: -Each sheet in bare

5.2 Inner packing conformity : Subject to client's evaluation Comments: -Nil

5.3 Export packing conformity : Subject to client's evaluation Comments: -500sheets per ream, then 16 reams per pallet

5.4 Samples selected from carton numbers: Total 6 pallets for inspection 6. Marking / Label:

6.1 Bar code: Subject to client's evaluation

-Item1(30x40inches): 20443758004146091704 on pallet

-Item2(64x90cm): 20444916902054092002 on pallet

6.2 Shipping mark conformity: Subject to client's evaluation

Comments: -Refer to photo

6.3 Marking & label conformity: Subject to client's evaluation

Comments: -Refer to photo

7 Informative Remark:

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 4 of 9

-All test equipment provided by factory. -Item1(30x40inches): 14pallets, item2(64x90cm): 21pallets, total quality of sheet: 500x16x35=280000. -The total weight of sheet calculated by factory was: item1(30x40inches): 8.6688WT, item2(64x90cm):9.6768WT, total: 18.3456MT. 8. Inspection Environment: Lighting : Room lighting

Sufficient Inspection place : Factory workshop Inspection done on: Other Cleanliness : Clean Weather condition: Dry 9. Attachment

01 02

03 04

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 5 of 9

05 06

07 08

09 10

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 6 of 9

11 12

13 14

15 16

17 18

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 7 of 9

19 20

21 22

23 24

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 8 of 9

25 26

27 28

29 30

31 32

SGS-P-7.4-01-F02-CTS

Report No.: CANWT00237548

This document is issued by the Company under its General Conditions of Service accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Companys findings at the time of its intervention only and within the limits of Clients instructions, if any. The Companys sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law.

[Rev.:02 Aug.19th.2015] Page 9 of 9

33 34

35 36

37 defect: black spot-minor 38 defect: black spot-minor