canter fg 4x4 - fuso australia

CANTER FG 4x4WIDE CAB / MANUAL HIGH/LOW RANGE

CLASS LEADING TARE WEIGHT AND 30,000KM SERVICE INTERVALS

GVM GCM Power/Torque

6,500KG 10,000KG

110KW / 370NM Light rigid licence required.Can be derated and driven with a passenger car licence.

A 4x4 FG Wide Cab SWB 5 Sp. MAN (FGB71CR6SFBC) 2815mm 6,500kg (4,495kg) 10,000kg (7,995kg)A 4x4 FG Wide Cab SWB 5 Sp. MAN (FGB71CR6SFAC) 2815mm 6,500kg (4,500kg) 10,000kg (8,000kg)B 4x4 FG Wide Cab MWB 5 Sp. MAN (FGB71ER6SFBC) 3415mm 6,500kg (4,495kg) 10,000kg (7,995kg)B 4x4 FG Wide Cab MWB 5 Sp. MAN (FGB71ER6SFAC) 3415mm 6,500kg (4,500kg) 10,000kg (8,000kg)

Engine Version FUSO 4P10-T4 DieselConfiguration 4 Cyl. In-line DOHC, 4-ValveType Variable Geometry Turbo Charged

Air to Air IntercooledDisplacement 3 litre (2998cc)Bore 95.8mmStroke 104mmPower (DIN) 110kW @ 2840~3500 rpmTorque (DIN) 370Nm @ 1350~2840 rpmMaximum Engine Speed 4100 rpmCompression Ratio 17.5:1Cooling System / Oil Cooler Water cooled,13.7L capacity/ Plate type engine oil

coolerAir Cleaner Paper Element Type with Restrictor Indicator. Vertical

Intake Mounted on Clean Air Side (RH)Emission Control Diesel Particulate Filter (DPF) Exhaust

Dash Display DPF Status 0~9 (Empty~Full)Parked Regeneration possible from 7~9

Emission Level ADR 80/03 & EEV rated Enhanced Environmentally-Friendly VehicleEuro 5

Injection System Bosch Common Rail Direct InjectionBosch Piezo Technology Injectors

Tank Type Rectangular Steel Tank with Locking CapFuel Capacity * 100 LitresFiltration Filter with Water Separator and Indicator SensorNotes *Max Fill to approx 95% of Air Capacity

Fan Drive Thermo modulated continuous control (Viscous)Radiator Corrugated Fin with Expansion Tank

Voltage 12V Negative EarthBattery Capacity 2x12V, 70Ah/5hrBattery Specification 115D31L x2Headlamp Type HalogenHeadlamp Capacity 2x55W/60WBody Builder Harness Yes*Notes *Standard from October 2021 build

Clutch Model FUSO C4W30Type Single Dry Plate, Direct Hydraulic Type

Version FUSO M038S5Type/Speeds 5 Speed with In-Dash Gearshift LeverFeatures Synchromesh 2nd-5thRatios 1st: 5.494

2nd: 3.0383rd: 1.5924th: 1.0005th: 0.723Rev. 5.494

PTO Opening LH Side

Model FUSO TF3No of Speeds 2Synchromesh NoRatio - Low 1.987Ratio - High 1.090

Axle Version FUSO D1HType Full Floating Hypoid with Constant Velocity Universal

JointsHubs Free Wheel, Manual Locking TypeRatio 5.285:1Notes *See MAX LOADING for vehicle capacity.

Type Multi-Leaf with Double Acting Shock AbsorbersSize 1150x70mm Leaves

Type Full Floating Hypoid Type Positive Locking LimitedSlip Differential (LSD).

Axle Version FUSO D035HRatio 5.285:1Notes See MAX LOADING for vehicle capacity.

Type Steel SuspensionDetails Multi-Leaf with Double Acting Shock AbsorbersSize Main Leaves 1250x70mm

Front 2800kgRear 5760kgTotal 6500kg

Options A BH31: 4495/7995kgGVM/GCM Rating

R84: Fire Servicedelete power packoption - without driver &far passenger airbag,central locking orelectrical front windows

A BH31: 4500/8000kgGVM/GCM Rating

R84: Fire Servicedelete power packoption - without driver &far passenger airbag,central locking orelectrical front windows

Type Integral Ball and Nut TypeSteering Column Tilt/Telescopic AdjustablePower Assist Standard


Type Hydraulic Dual Circuit with Front and Rear DrumsSize Front 320mm Diameter x 75mm WidthSize Rear 320mm Diameter x 110mm WidthFeatures Auto Slack Adjusters

ABS plus EBD (Electronic Brake Distribution)Exhaust BrakeBrake Priority System

Park Brake Transmission Mounted

Wheel Type 7 x Disc Rims (Including Spare)Wheel Size 17.5x6.0-127Wheel Stud Pattern 6 StudTyre Size All 215/75R17.5 124/123 (tubeless)

Off-road Tyres Front and Rear (for Extra Traction)Spare Tyre Carrier Provided

Type Reinforced Tapered Channel with Drop ShapeSize 192x60x6mmWidth 752mmTensile Strength 440 MPa with 540 MPa Stiffeners

Gauges Speedometer with OdometerTachometerFuel LevelWater Temperature

Colour Information Display Fuel ConsumptionDPF Bar Chart from 1~9Water TemperatureMaintenance Reminder SystemTripmeters

Satellite Navigation Maps with heavy vehicle weight, length, height &hazardous material selectable restrictions with 3 yearsof Map updates

Colour Display A B6.1 inch LCD with touchscreen control

A B7 inch LCD with touchscreen control

Phone Connectivity Bluetooth® hands freeAudio Visual Entertainment A B

Bluetooth® musicstreaming compatibleDigital radio DAB+ (alsoAM/FM for areas notcovered by DAB+) USB& 3.5mm/AUX port

A BCD/DVD player andDigital radio DAB+(also AM/FM for areasnot covered by DAB+)

Reversing CameraCompatible

A BDisplay can accept upto 3 cameras#

A BDisplay can accept upto 5 cameras#

Optional Accessories(available at additional cost)

Rear Mounted Parking Sensor Kit High or LowTyre Pressure Monitoring System

Notes A B# Cameras availablethrough spare parts

A B# Cameras availablethrough spare parts

Airbag(s) Dual Air Bags and Seat Belt Pre-Tensioners (Driver &Far Side Passenger)

Cruise Control NoHill Start System YesCab Cooling & Heating Air Conditioner / Heater / DemisterAccessory Power 12V Accessory Power Outlet / Cigar LighterDriving Fuso Multimedia Unit

Keyless Central LockingElectric WindowsCup Holders (2)

Storage Dual Overhead Storage PocketsIn-Dash Centre Document StorageDoor Storage PocketsDash Storage Tray (1 DIN)Coat Hooks

Cab: External Front End-Outline Marker LampsDoor Side Impact Beams

Chassis Reverse Warning BuzzerFactory Reverse Camera with Infrared Display andAudible Pickup (Supply only in Cabin with CabChassis)

Type All Steel Forward Control Manual TiltCab Structure ECE-R29 European Cab Strength ApprovedMounting Hydroelastic 4 PointAdditional Engine Access Removable Engine Access PanelColour Natural WhiteWindscreen Wipers 2 Speed + Intermittent Cycle with Integrated Washer

NozzlesRear Vision Mirrors 1 x Internal

2 x External Convex (ECE 46) - HeatedSeating Capacity 3Seat Belts A B

Lap Sash Belts forOutside SeatingPositionsLap Belt for CentreSeat

A BLap Sash Belts forOutside SeatingPositionsLap Belt for CentreSeatDriver Seat BeltWarning (From Aug 20build)

Seat (driver) Suspended with Weight Adjustment, LH Arm Rest andLumbar Support

Seats (passenger) Flat Folding, 2 Passenger Bench

Interval* 30,000km or 12 Months (whichever occurs first)Notes * based on normal operating conditions and may be

reduced when operating under severe conditions.

Basic/Powertrain 5 Years or 200,000kms (whichever occurs first)Cab Perforation/AntiCorrosion

5 Years

Turning Circle (kerb to kerb- metres)

A A11.4

B B13.4

Road Speed (km/h) at MaxEngine Speed

123

Engine Speed (rpm) at100km/hr (top gear)

2957

Startability at Rated GVM(theoretical)*

51%

Gradeability at Rated GVM(theoretical)*

74%

Notes *This is theoretical performance only. Actualperformance may vary under different conditions


Front* A A1740kg

B B1750kg

Rear* A A820kg

B B845kg

Total* A A2560kg

B B2595kg

Notes * Mass (est.) includes oil and water but excludes sparewheel, tools & fuel. Weights provided are subject to3.5% variation (+/-)

WFF (Width Front Fender)(mm)

1995

WRA (Width Rear Axle)(mm)

2030

WRT (Width Rear Track)(mm)

1560

Width Frame (mm) 750A - Length Overall (mm) A A

5190B B5935

C - Front Overhang (mm) 1125D - Wheelbase (mm) A A

2815B B3415

G - Front Axle to Rear ofCab (mm)

540

H - Rear of Cab to RearmostItem Behind Cab (mm)

81

I - Rearmost Item BehindCab to Rear Axle (mm)

A A2194

B B2794

J - Frame, Rear Axle to End(mm)

A A1195

B B1395

O - Air Intake to Cab Roof(mm)

184

P - Height Cab to Ground(mm)

2475

Q - Height Cab to Frame(mm)

1504

R - Height Rear Frame toGround (mm)

881

Notes Chassis reinforcement must be utilised forTipper/Demountable type body configurations.To conform with ADR 13/00 and 14/02 (lighting/mirrorrequirements) the following must be adhered to atbody installation.- If overall width exceeds 2.1 metres and other thanflat type or tipper body is fitted, rear end-outlinemarkers must be installed.- If overall length exceeds 6.0 metres, side reflectorsmust be installed.- If overall length exceeds 7.5 metres and widthexceeds 2.1 metres, side marker lamps must beinstalled.- If overall width is less than 2.2 metres, the mirrorsmust be modified to project not more than 230mm.To conform with ADR 42/04 (General Safety), rearwheel guards must be fitted to the vehicle.

Unless specified in writing herein the accessories, applications, bodies orequipment depicted in this document are for illustration purposes only and may notbe available from Daimler Truck and Bus Australia Pacific Pty Ltd. ABN 86 618 413282 DTB. No representation or warranty whatsoever is given in relation to anyaccessories, applications, bodies or equipment or suitability of same that are shownherein that may be manufactured, supplied or fitted by a party other than DTB. DTBreserves the right without notice or obligation to discontinue or make changes tothe colour, designs, materials and specifications of the products and optionsreferred to herein at any time. For the most current information and in order toascertain which accessories, applications, bodies and equipment are available fromDTB please contact your authorised FUSO Truck and Bus dealer. Fuso is aregistered trademark of Daimler Truck and Bus Australia Pacific Pty Ltd. CopyrightDTB. Reproduction in whole or part prohibited without written approval. PartNumber TSC190E-SSV2. Valid from 05-Nov-21.

canter fg 4x4 - fuso australia

Documents