Canon EOS Rebel T3i Screen ReplacementReplacing the damaged LCD screen on the rear casing.

Written By: Natalie Crock

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

INTRODUCTION

Use this guide to replace the LCD screen on your Canon EOS Rebel T3i.

TOOLS:Phillips #000 Screwdriver (1)

Spudger (1)

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Step 1 — Battery

Locate the battery compartment onthe bottom of the camera.

Step 2

Hook your finger onto thecompartment door latch.

Open the battery compartment door.

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Step 3

Remove the battery from thecompartment.

Step 4 — Screen

Remove the two 3 mm Phillips #000 screws. The screws are on opposite sides of the screen.

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Step 5

Remove the plastic backing.

Step 6

Unplug the blue cable from the backof the LCD.

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-11-04 02:18:41 AM.

Step 7

Remove the two 3 mm Phillips #000 screws.

Separate the LCD from the plastic housing.

Canon EOS Rebel T3i Screen Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6