canon dm-mv600i, dm-mv630i, dm-mv600, dm-mv590 digital camcorder

296

Upload: skopje1964

Post on 26-Dec-2015

298 views

Category:

Documents


27 download

TRANSCRIPT

Page 1: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder
Page 2: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

No. D17-7316 Digital Video Camera

CANON INC. 2003

Canon Inc.Digital Imaging Products Service Dept.

First Edition : Feb. 2003First Print : Feb. 2003

iPAL

Video Product

c

DM-MV650i E,DM-MV630i EDM-MV600i E,DM-MV600 E DM-MV590 E

DM-MV650i E,DM-MV630i EDM-MV600i E,DM-MV600 E DM-MV590 E

Page 3: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 1. GENERAL DESCRIPTION

CONTENTS

1. Product Overview ----------------------------------------------------------------------------------------------------------------------------- 1-11-1 Concepts -------------------------------------------------------------------------------------------------------------------------------- 1-11-2 Main Features -------------------------------------------------------------------------------------------------------------------------- 1-1

1-2-1 Direct Printer Compatible ------------------------------------------------------------------------------------------------- 1-21-2-2 DV Messenger -------------------------------------------------------------------------------------------------------------- 1-2

1-3 Function and Performance List ------------------------------------------------------------------------------------------------------ 1-31-4 Function and Performance Comparison Chart ------------------------------------------------------------------------------------ 1-4

2. Technical Explanation -----------------------------------------------------------------------------------------------------------------------1-102-1 Design ---------------------------------------------------------------------------------------------------------------------------------1-10

2-1-1 Concept ---------------------------------------------------------------------------------------------------------------------1-102-1-2 Variation --------------------------------------------------------------------------------------------------------------------1-10

2-2 DMC III Digital Mechanism Chassis ---------------------------------------------------------------------------------------------- 1-112-2-1 Improved Quality ---------------------------------------------------------------------------------------------------------- 1-112-2-2 Configuration Comparison of DMC II and DMC III ---------------------------------------------------------------- 1-112-2-3 DMC III Slide in/out Status ---------------------------------------------------------------------------------------------1-12

2-3 Direct Print (Canon Camera Direct Correspondence Printer) ------------------------------------------------------------------1-132-3-1 Direct Print Operation Specifications ----------------------------------------------------------------------------------1-132-3-2 Calling up the Direct Print Setting Screen -----------------------------------------------------------------------------1-13

3. Performance and Functions -----------------------------------------------------------------------------------------------------------------1-144. System Diagram (Common to all Models) ------------------------------------------------------------------------------------------------1-245. Overview of Viewfinder / LCD Panel Displays ------------------------------------------------------------------------------------------1-25

5-1 Camera Mode -------------------------------------------------------------------------------------------------------------------------1-255-2 VCR Mode ----------------------------------------------------------------------------------------------------------------------------1-325-3 Card/Camera Mode (DM-MV650i E, DM-MV630i E only) ------------------------------------------------------------------1-365-4 Card Playback Mode (DM-MV650i E, DM-MV630i E only) -----------------------------------------------------------------1-395-5 Menu Display -------------------------------------------------------------------------------------------------------------------------1-415-6 Card-Related Screen Displays ------------------------------------------------------------------------------------------------------1-525-7 Direct Print Setting Screen ----------------------------------------------------------------------------------------------------------1-605-8 Print ------------------------------------------------------------------------------------------------------------------------------------1-635-9 Warning Displays ---------------------------------------------------------------------------------------------------------------------1-64

6. Backing Up Various Data -------------------------------------------------------------------------------------------------------------------1-666-1 Backup by Main Power Supply ----------------------------------------------------------------------------------------------------1-666-2 Backup by Main Power Supply or Backup Power Supply (Lithium Coin Primary Battery) ------------------------------1-666-3 Backup Conditions Related to Switch Operation --------------------------------------------------------------------------------1-67

6-3-1 Turning OFF the Power --------------------------------------------------------------------------------------------------1-676-3-2 Switching the Power Switch to a Different Position -----------------------------------------------------------------1-686-3-3 Switching Camera Modes/Switching Program AE Modes ----------------------------------------------------------1-69

Page 4: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

7. Other Features --------------------------------------------------------------------------------------------------------------------------------1-707-1 Green Mode ---------------------------------------------------------------------------------------------------------------------------1-707-2 On Screen -----------------------------------------------------------------------------------------------------------------------------1-707-3 Headphones and Speaker ------------------------------------------------------------------------------------------------------------1-717-4 Battery Indicator, Low-Power Warning, and Low-Power Shutoff -------------------------------------------------------------1-717-5 System Data Displays ----------------------------------------------------------------------------------------------------------------1-717-6 Data Code Display -------------------------------------------------------------------------------------------------------------------1-717-7 MP Tape Support ---------------------------------------------------------------------------------------------------------------------1-717-8 Confirmation Beep -------------------------------------------------------------------------------------------------------------------1-727-9 Using Analog Line Recording (Not available on PAL models) and -----------------------------------------------------------1-73 DV Recording (Not Available on PAL models) ----------------------------------------------------------------------------------1-737-10 Support for Analog Signal I/O Copyright Protection Signals ----------------------------------------------------------------1-747-11 Video ID1 Detection/Output Support --------------------------------------------------------------------------------------------1-747-12 Audio Dubbing ----------------------------------------------------------------------------------------------------------------------1-75

7-12-1 Tapes to which Audio Dubbing can be Added -----------------------------------------------------------------------1-757-12-2 Selecting an Audio Dubbing Signal Input Source -------------------------------------------------------------------1-757-12-3 Audio Dubbing Procedure ----------------------------------------------------------------------------------------------1-757-12-4 CGMS ----------------------------------------------------------------------------------------------------------------------1-75

7-13 AV Insert (Not Available on PAL models) ---------------------------------------------------------------------------------------1-767-13-1 Tapes Allowing AV Insert ----------------------------------------------------------------------------------------------- 1-767-13-2 AV Insert Signal Input Source Selection -----------------------------------------------------------------------------1-767-13-3 AV Insert Procedure -----------------------------------------------------------------------------------------------------1-767-13-4 CGMS ---------------------------------------------------------------------------------------------------------------------1-76

7-14 Analog/Digital Signal Conversion ------------------------------------------------------------------------------------------------1-777-14-1 A/D Signal Conversion Procedure ------------------------------------------------------------------------------------1-777-14-2 CGMS ---------------------------------------------------------------------------------------------------------------------1-77

7-15 Multi Switch -------------------------------------------------------------------------------------------------------------------------1-77

Page 5: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-1

1. Product Overview

1-1 Concepts

Benefits from efforts to reform the cost structure of the Canon lineup. Deluxe, more stylish design. Retains the superb performance of the DM-MV550i E, DM-MV530i E, DM-MV500i E, DM-MV510 E,

DM-MV500 E, DM-MV490 E series while adding multimedia features. More advanced picture quality than the DM-MV550i E, DM-MV530i E, DM-MV500i E, DM-MV510 E,

DM-MV500 E, DM-MV490 E Available in three separate models to meet a range of user requirements.

1-2 Main Features

(1) Compact & Stylish New Stylish Design

(2) High Performance Lens 22× optical zoom lens compatible with 1/ 6- inch CCD (DM-MV650i E only)

(3) Excellent Picture Quality MACS system for improved picture quality

(4) Multimedia Memory card slot, USB terminal (DM-MV650i E, DM-MV630i E only) Motion- JPEG (DM-MV650i E only) Camera Direct Camera Direct

(5) Advanced Specification Advanced accessory shoe (DM-MV650i E only) New Digital Feature

(6) All In One 2.5- inch LCD and CVF, terminals on camera body

Multi MediaCompact & Stylish Camcorder

The DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E ismore stylish than the DM-MV550i E, DM-MV530i E, DM-MV500i E, DM-MV510 E,DM-MV500 E, DM-MV490 E and delivers functions to rival multimedia models.

Page 6: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-2

1-2-1 Direct Printer Compatible

Easy to connect and easy to print Printing XGA still images stored on a memory card is simple.

1-2-2 DV Messenger

A peer-to-peer type bidirectional communications software program for linking digital video camcorders and PCs. Allows bidirectional sending of audio or video content and messages (text or images) via the Internet. Basic specifications are compatible with Windows Messenger. Allows control (camera zoom and focus, VCR playback and stop, access to the memory card) of the digital video camcorder

from a remote PC.

Control printer from DVC

DM-MV650i E, DM-MV630i E

XGA-size (1024 × 768) still images

Direct Printer Camera Direct Printer (BJ F890PD) (BJ 895PD) (BJ 535PD)

Printer cable

IEEE1394IEEE1394

Internet

Page 7: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-3

1-3 Function and Performance List

Specifications DM-MV650i E DM-MV630i EDM-MV600i E, DM-MV600 E,

DM-MV590 EZoom mag. 22× optical zoom/ 20× optical zoom/ 18× optical zoom/

440× digital zoom*1 400× digital zoom*1 360× digital zoom*1

CCD 1/6-inch interlaced CCD (total pixels : 800,000)Image stabilization Electronic image stabilizer (motion video effective pixels : 400,000)Monitor 2.5-inch screen, 112,000 pixels LCD monitorEVF 0.33-inch screen, 113,000 pixel color viewfinderAnalog line input *2

Memory card function (SD memory card, MultiMediaCard) ×Card Still images Progressive Photo

×recording (1024×768, 640×480)Card motion video Motion JPEG + audio

× ×recording (monaural)USB file transfer ×USB direct print ×IEEE1394 file

transfer

IEEE1394 streaming

videoUSB compatible ×Accessory shoe (Compatible with

advanced accessory shoe)

Auxiliary illumination White LEDfunction (Super Night mode: tape) ×

(Low light + time: card)Illuminated keys (6 colors) ×Night mode (Super Night mode)

Wide attachment lens ×

BP-512 BP-508

*1 : Tape mode only*2 : Not applicable to PAL models

Page 8: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-4

1-4 Function and Performance Comparison Chart

ItemDM-MV650i E, DM-MV630i E,

DM-MV600i E, DM-MV600 E, DM-MV590 E

Camera

Image sensing Image size Tape 1/6-inch CCD

device Card 1/6-inch

System (filter) Interlacing (color correction filters)

Total pixels 800,000 pixels

Effective pixels Tape 400,000 pixels

Card 528,000 pixels

Lens Optical zoom Tape DM-MV650i E : 22× 2.8 - 61.6 mm (approx. 54 - 1,188 mm)

magnification, DM-MV630i E : 20× 2.8 - 56 mm (approx. 54 - 1,080 mm)

focal length DM-MV600i E, 600 E, 590 E : 18× 2.8 - 50.4 mm (approx. 54 - 972 mm)

(35mm equivalent) Card DM-MV650i E : 22× 2.8 - 61.6 mm (approx. 48 - 1,056 mm)

DM-MV630i E : 20× 2.8 - 56 mm (approx. 48 - 960 mm)

Digital zoom Tape DM-MV650i E : 88× /440× 246.4 mm / 1,232 mm

magnification (equivalent to approx. 4,752 mm / 23,760 mm)

DM-MV630i E : 80× /400× 224 mm / 1,120 mm

(equivalent to approx. 4,320 mm / 21,600 mm)

DM-MV600i E, 600 E, 590 E : 72× /360× 201.6 mm / 1,008 mm

(equivalent to approx. 3,888 mm / 19,440 mm)

Card None

System Tape CCD readout

Card -----

F number DM-MV650i E : F1.6 - 3.6, DM-MV630i E : F1.6 - 3.2,

DM-MV600i E, 600 E, 590 E : F1.6 - 2.9

Aperture blades 2

Zoom speed Variable

Filter diameter 30.5mm P0.5

Noise reduction Camera Tape Either CCD-NR or Y/C-NR

Card None

Chroma-only, median filter

Recorder C-NR

Minimum Night mode 1.6 lx

illumination Low Light mode 3.4 lx

Auto mode 14 lx

Image Adjustment Tape Electronic

stabilization system Card None

Sensing method Angular velocity sensing

Shooting functions

AE mode Program AE Tape (Full Auto)

(Auto, Sports, Portrait, Spotlight, Surf & Snow, Low Light, Night,

Super Night (DM-MV650i E only))

Card (Full Auto)

(Auto, Sports, Portrait, Spotlight, Surf & Snow, Low Light,

Low Light+ (DM-MV650i E only))

Photometric Center-bottom-weighted average Full Auto, Auto, Sports, Portrait, Low Light, Night, Super Night (DM-

system MV650i only)

Evaluative photometry + 128 segments (Spotlight mode, Surf & Snow mode (Sand & Snow mode))

All area photometry

Magnifica-tion,focallength(35mmequivalent)

MotionvideoStillimages

Page 9: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-5

ItemDM-MV650i E, DM-MV630i E,

DM-MV600i E, DM-MV600 E, DM-MV590 E

Shooting functions

Exposure AE lock ×

adjustment AE shift Supported (after pressing Setting key, adjust using Multi-switch and press

Setting key again) ± 2 steps

(Disabled during Green mode, Spotlight mode, Surf & Snow mode, Night

mode, and Super Night mode)

Exposure correction ×

Gain setting/sensitivity increase Auto

Back light correction ×

Shutter speed High-speed shutter Tape 6 levels

(1/50, 1/120, 1/250, 1/500, 1/1000, 1/2000, second. (Auto mode))

Card Switches upper limit to 1/250 second (included Program AE)

Auto Tape 1/50 sec - 1/500 sec.

Card 1/25 sec - 1/250 sec.

Slow shutter 1/15 sec (Low Light mode, Low Light +), 1/8 sec to 1/60 sec (Night

mode, Super Night mode)

Aperture value Auto iris

Image quality Color gain adjustment ×

adjustment Hue adjustment ×

(custom preset) Sharpness adjustment ×

Setup adjustment ×

White Balance Auto

Preset Outdoor, Indoor

System TTL, 128 segments

Focus Mode AF/MF, forced infinity

Manual focus Multi-switch operation

16:9 Recording system Tape Vertical Stretching

Card ×

Area marker display ×

Digital fade Tape Motion video Auto Fade, Wipe, Corner Wipe, Jump, Flip, Puzzle, Zigzag, Beam, Tide

(executed by pressing the Start/Stop button.)

Still Image ×

Card Motion video ×

Still Image ×

Digital effect Tape Motion video/still Image Art, Black & White, Sepia, Mosaic, Ball, Cube, Wave, Color Mask, Mirror

Card Motion video/still Image Black & White

Card mix Tape Motion video/still Image Card Lumi key, Card Chroma key, Camera Chroma key, Animation

Card Motion video/still Image ×

Multi-screen Tape Motion video/still Image Supported (disabled in Night mode and Super Night mode)

Card Motion video/still Image ×

Capture speed 1/50 sec. Manual, Fast (every 4th field), Normal (every 6th field),

Shutter speed Slow (every 8 fields)

1/12.5 sec. Manual, Fast (every 4 fields), Normal (every 8 fields),

Shutter speed Slow (every 12 fields)

Motion video Mode Tape Normal

shooting Card 320 × 240 pixels (continuous, approx. 10 seconds), 160 × 120 pixels

(DM-MV650i E only) (continuous, approx. 30 seconds)

Page 10: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-6

ItemDM-MV650i E, DM-MV630i E,

DM-MV600i E, DM-MV600 E, DM-MV590 E

Shooting functions

Still image Mode Tape Normal (field)

Card Progressive (iris shutter) (disabled in Night mode)

Single image Tape 6.5 sec.

recording time Card ×

Continuous Tape ×

shooting Card ×

Photo button Form Still image only button

Half depressed Supported (recording standby only)

Still image confirmation Only with card mounted

Strobe support (models) ×

Recorded image Frame image (video output is field image)

Frame processing Pseudo frame (Low Light mode, Night mode, Super Night (Slow) mode)

Negative-positive reversal ×

Video light × (For only DM-MV650i E, white LED is provided (turned ON in

super-night mode, low-light mode))

Zebra pattern ×

Color bar display ×

Selftimer 10 sec./remote control: 2 sec.

Interval timer ×

Clear scan ×

Recorded image size/file format VGA: 640(H) × 480 (V), XGA: 1024(H) × 768(V)/JPEG (DM-MV650i E,

DM-MV630i E only)

Memory card SD memory card, MultiMediaCard

REC search

REC review

Standby switch ×

Power save (after 5 minutes in Recording pause) Power shutoff

Displayed text recording ×

Audio 16-bit 2-channel (48KHz)

12-bit 4-channel (32 kHz) Simultaneous 4-channel recording not possible

Wind screen ON/OFF switch (built-in microphone only)

EVF Size 0.33-inch (TFT color RGB delta arrangement)

Pixels 113,000

Brightness adjustment ×

Color adjustment ×

Movable ×

Monitor LCD Size 2.5-inch

Pixels 112,000

Brightness adjustment

Movable Supports mirror shooting

Page 11: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-7

ItemDM-MV650i E, DM-MV630i E,

DM-MV600i E, DM-MV600 E, DM-MV590 E

VCR

Playback Frame playback Forward/Reverse

system Slow playback Forward/Reverse

2X SP playback Forward/Reverse

1X SP playback Forward/Reverse

Cue/review 11.5X speed

Search Photo search

Date search

Index search ×

Special playback Playback zoom (2X zoom) (Tape playback or card still image playback)

effects D. effects Tape Art, Black & White, Sepia, Mosaic, Ball, Cube, Wave, Color Mask, Mirror

Card ×

D. fade Tape Auto fade, Wipe, Corner wipe, Jump, Flip, Puzzle, Zig Zag, Beam, Tide

Card ×

Multi screen 4/9/16 screen (tape only)

Data code display Time and Date display

Card Slide show (DM-MV650i E, DM-MV630i E only)

Index playback (DM-MV650i E, DM-MV630i E only)

(6-screen playback)

Card fast forward/rewind Card jump (DM-MV650i E, DM-MV630i E only)

Audio dubbing (Microphone only on PAL models)

AV insert Digital (Not applicable to PAL models)

Analog (Not applicable to PAL models)

Zero set memory

Edit function Simple editing ×

Special effects ×

Page 12: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-8

ItemDM-MV650i E, DM-MV630i E, ZR60 A

DM-MV600i E, DM-MV600 E, DM-MV590 E

System

Inter face Microphone input

(terminal) Headphone output

DV terminal Input/output (Output only for PAL models)

S terminal Input/output (Output only for PAL models)

AV terminal Input/output, φ3.5mm jack (also serves as headphone terminal)

Editing terminal (LANC terminal) ×

USB port (mini-B Receptacle) (DM-MV650i E, DM-MV630i E only)

Memory card file transfer (DM-MV650i E, DM-MV630i E only)

DV to Analog signal conversion (Not applicable to PAL models)

Direct print (When connected to BJ 535PD or BJ 895PD camera direct printer:

DM-MV650i E, DM-MV630i E only)

Border yes/no and number of copies can be set (DPOF compatible)

World clock

Text titles ×

Speaker

Confirmation beep

Tally light ×

Remote control cord Supports 1 and 2,

Accessory shoe (DM-MV650i E only; supports advanced accessory shoe)

Video ID (ID2) (NTSC only)

Recording modes SP,LP

Illuminated keys (6 colors: DM-MV650i E only)

Custom key ×

Index Screen key (DM-MV650i E, DM-MV630i E only)

Card mix key (DM-MV650i E, DM-MV630i E only)

Slideshow key (DM-MV650i E, DM-MV630i E only)

DV control ×

Internal battery charging

Backup power Lithium coin battery (CR1616)

Battery pack power BP-500 series lithium ion battery

Page 13: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-9

External View

Fig. 1-1

Page 14: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-10

2. Technical Explanation

2-1 Design

2-1-1 Concept

The design of the DM-MV550i E, DM-MV530i E, DM-MV500i E, DM-MV510 E, DM-MV500 E, DM-MV490 E hasbeen further refined with the introduction of a more stream-lined surface.The popular layout of the DM-MV550i E, DM-MV530i E, DM-MV500i E, DM-MV510 E, DM-MV500 E, DM-MV490 E hasbeen retained.The MENU buttons have been moved out of the LCD to im-prove ease of use.Independently illuminated keys are used (DM-MV650i E) andthe feel of the colored clear keys enhanced (both DM-MV630i Eand DM-MV600i E, DM-MV600 E, DM-MV590 E).The front terminal cover is now finished with metallic paint on allmodels (DM-MV650i E, DM-MV630i E, and DM-MV600i E,DM-MV600 E, DM-MV590 E) for a more deluxe look.

2-1-2 Variation

Champagne metallic(same as DM-MV550i E)

Illuminated keys(with white LEDs) EVF: Silver (paint)

DM-MV650i E DM-MV630i EDM-FV600i E/

DM-MV600 E / DM-MV590 EBlue clear keys EVF: Silver (paint)

(20x zoom)

Blue clear keys EVF: Gray(color of molded plastic)

(18x zoom)

Blue metallic (same as DM-MV5i MC E)

Dark blue metallic (new color)

Cover L: Silver (paint) Cover L: Gray (color of molded plastic) Cover L: Gray (color of molded plastic)

(22x zoom)

Page 15: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-11

2-2 DMC III Digital Mechanism Chassis

2-2-1 Improved Quality

The DMC I and DMC II digital mechanism chassis, which formed the core of previous Canon camcorder models, were developed in1997 and 1999, respectively. They helped make those camcorders more compact. In particular, as the excellent image quality andreliability of Canon camcorders has come to be highly evaluated by the marketplace in recent years, the number of units manufacturedhas been increasing substantially. The DMC III digital mechanism chassis was developed with the aims of further improving reliability,by drastically reducing the number of component parts, and also enhancing quality. At the same times, the developers worked to reducethe cassette loading time and improve ease of operation.

2-2-2 Configuration Comparison of DMC II and DMC III

Digital mechanism chassis

DMC III DMC II

period October 2002 January 2000

Drum diameter 21.7mm 21.7mm

Slide

Size Depth 56mm 56mm

Width 72mm 72mm

Height 23.7mm 22.2mm

Volume 95cc 89cc

Weight 100g 100g

Number of parts 194 272

FF/REW speed 30x 30x

56mm

72m

m

56mm

72m

m

22.2

mm

23.7

mm

DMC III DMC II

Page 16: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-12

2-2-3 DMC III Slide in/out Status

23.7

mm

39.4

mm

56mm 73mm

Slide in status Slide out status

Page 17: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-13

2-3 Direct Print (Canon Camera Direct Correspondence Printer)

By connecting the Canon BJ F890PD or BJ 895PD or BJ 535PD camera direct correspondence printer to the product (DM-MV650i E),the user can print still images stored on an SD memory card or MultiMediaCard without using a PC. Note: This function is not compatible with the CP-100 or CP-10 card photo printer.

2-3-1 Direct Print Operation Specifications

2-3-2 Calling up the Direct Print Setting Screen

(1) The camcorder must be in the Card Playback mode with the BJ 895PD connected andthe BJ 895PD powered on.In the upper left-hand corner of the screen two icons marked Print and Settings aredisplayed. If a memory card with images stored on it is mounted in the camcorder, thelast image recorded is displayed on the screen.

(2) Press the Setting switch.The camcorder switches to the Direct Print mode.

Turn the Multi switch to select Print, Cancel, No. of Copies, or Style (Border or NoBorder) and specify the setting for the desired item. (Refer to page 60 for details ofthe screen.)

The direct print setting specifications are basically the same as those for a digitalcamera.However, the card image advance item on the setting screen is unique to video cam-eras, and the Advance button works at all times except when an image displayed inreduced size is in the process of being printed.

Other

(1) The image larger than 160 × 120 dots and smaller than 2024 × 1536 dots can be printed. However, the file larger than 2MB cannotbe printed.

(2) Animation image cannot be printed.

L SizeBorderless

Style

Copies

OK Cancel

Compatible printers BJ F890PD/BJ 895PD/BJ 535PD

Functions

1 image

Partial image ×

Border yes/no

Date yes/no ×

Number of copies

DPOF specified printing

Index printing ×

Trimming ×

Operation keys

Change button focus Multi switch (up-down)

Confirmation button Setting button

Card image advance Card image advance + and - buttons

Page 18: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-14

3. Performance and FunctionsDM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 Type VTR- integrated camera2 Recording system Rotating two- head helical scan azimuth recording

Consumer electronics digital DVC (SD specs)Complies with PAL system (625 lines, 60 fields)

2-1 Video signal recording system Digital component recording.R-Y, B-Y = 6.75MHz

Quantized bits 8bits2-2 Audio signal recording system PCM digital recording.

16-bit, 48KHz 2 ch (Stereo 1)12-bit, 32KHz 4 ch (Stereo 1 and 2)

2-3 Tracking 2-frequency pilot system2-4 Tape speed Approx. 18.83mm/second. (in SP mode)

Approx. 12.57mm/second. (in LP mode)2-5 Head drum

Drum diameter φ 21.7mmRpms 9000/ 1.001 rotations/ minuteHeads Video heads: 2

3 Recording/ playback time 80 minutes maximum (in SP mode)120 minutes maximum (in LP mode)

Continuous recording time using battery/ actual recording timeDM-MV650i E BP-508 Approx. --- minutes/ --- minutes (using CVF), Approx. --- minutes/ --- minutes (using LCD)

BP-512 Approx. 180 minutes/ 95 minutes (using CVF), Approx. 140 minutes/ 75 minutes (using LCD)BP-522 Approx. 370 minutes/195 minutes (using CVF), Approx. 295 minutes/155 minutes (using LCD)BP-535 Approx. 590 minutes/315 minutes (using CVF), Approx. 470 minutes/250 minutes (using LCD)

DM-MV630i E BP-508 Approx. 100 minutes/ 55 minutes (using CVF), Approx. 75 minutes/ 40 minutes (using LCD)BP-512 Approx. 180 minutes/ 95 minutes (using CVF), Approx. 140 minutes/ 75 minutes (using LCD)BP-522 Approx. 370 minutes/195 minutes (using CVF), Approx. 295 minutes/155 minutes (using LCD)BP-535 Approx. 590 minutes/315 minutes (using CVF), Approx. 470 minutes/250 minutes (using LCD)

DM-MV600i E, DM-MV600 E, DM-MV590 EBP-508 Approx. 100 minutes/ 55 minutes (using CVF), Approx. 75 minutes/ 40 minutes (using LCD)BP-512 Approx. 180 minutes/ 95 minutes (using CVF), Approx. 140 minutes/ 75 minutes (using LCD)BP-522 Approx. 370 minutes/195 minutes (using CVF), Approx. 295 minutes/155 minutes (using LCD)BP-535 Approx. 590 minutes/315 minutes (using CVF), Approx. 470 minutes/250 minutes (using LCD)

4 Cassette tape specifications Mini DVC specs4-1 Tape type Vapor- deposited metal tape4-2 Tape width 6.35mm Vapor- deposited metal tape4-3 Tape thickness 7µm

5 Camera5-1 Image sensing device 1/ 6- inch interlaced CCD

5-1-1 PixelsTotal pixels Approx. 800,000Actual effective pixels Approx. 400,000 (tape)

Approx. 528,000 (card)5-1-2 Filter Color correction filter5-1-3 Color separation system Differential read out5-1-4 Signal configuration PAL standard color TV signal5-1-5 Scanning system 625 lines × 50 fields / 25 frames5-1-6 Minimum subject illumination

Auto mode Approx. 14 lxLow light mode Approx. 3.4 lxNight mode Approx. 1.6 lx

5-1-7 Subject illumination range Approx. 1.6 lx to approx. 100,000 lx

Page 19: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-15

5-2 Photo lens5-2-1 Nominal focal length

Tape recording DM-MV650i E 2.8 to 61.6 mm 22x zoom (35 mm equivalent: 54 to 1,188 mm)DM-MV630i E 2.8 to 56 mm 20x zoom (35 mm equivalent: 54 to 1, 080 mm)DM-MV600i E, DM-MV600 E, DM-MV590 E

2.8 to 50.4 mm 18x zoom (35 mm equivalent: 54 to 972 mm)Card recording DM-MV650i E 2.8 to 61.6 mm 22x zoom (35 mm equivalent: 48 to 1,056 mm)

DM-MV630i E 2. 8 to 56 mm 20x zoom (35 mm equivalent: 48 to 960 mm)DM-MV600i E, 600 E, 590 E ——— (Card recording not supported)

5-2-2 Nominal aperture ratioDM-MV650i E 1 : 1.6 (F3.6 on tele end)DM-MV630i E 1 : 1.6 (F3.2 on tele end)

DM-MV600i E, 600 E, 590 E 1 : 1.6 (F2.9 on tele end)5-2-3 Lens configuration 11 elements in 8 groups, using one two- sided aspheric lens5-2-4 Focus adjustment Inner focus type, manually adjustable (adjusted by rotating multi- dial)5-2-5 Minimum object distance 10 mm (AF linked; wide end), 1 m for full zoom area (from lens tip)5-2-6 Power zoom Multi- level variable- speed power zoom, slide lever system. The zoom speed can be changed

depending on the shift amount of the slide lever.Using optical zoom Approx. 2.1 seconds to approx. 23 seconds (Using tape)

Approx. 1.9 seconds to approx. 20 seconds (Using card)Using electronic zoom Approx. 3.6 seconds to approx. 26 seconds (Using tape)

Approx. 2.5 seconds to approx. 22 seconds (Using card)Manual zooming cannot be used (no zoom ring)

5-2-7 Focal length display None. There is a simple zoom display in the viewfinder.5-2-8 Macro mechanism Wide end macro5-2-9 Macro shooting distance 10 mm (from lens front)5-2-10 Filter diameter 30.5 mm P0.55-2-11 Accessory lens, filter Can use WD- 30.5, TL- 30.6, FS- 30.5U, or WA- 30.5 (WA- 30.5 is supplied with DM-MV650i E

model only.)5-2-12 Lens hood None5-2-13 Lens cap Included; Screw-on type

5-3 Digital zoom (tape recording only)DM-MV650i E To 88x (approx. 246.4 mm (35 mm equivalent: 4,752 mm)), to 440x (approx. 1,232 mm (35 mm

equivalent: 23,760 mm))DM-MV630i E To 80x (approx. 224 mm (35 mm equivalent: 4,320 mm)), to 400x (approx. 1,120 mm (35 mm

equivalent: 21,600 mm))DM-MV600i E, 600 E, 590 E To 72x (approx. 201.6 mm (35 mm equivalent: 3,888 mm)), to 360x (approx. 1,008 mm (35 mm

equivalent: 19,440 mm))5-4 Image stabilization function Included (using tape only)

5-4-1 System Electronic image stabilizer5-4-2 Shaking sensing system Angular velocity sensing (using piezoelectric vibration sensor)

5-5 Shooting modes Motion Video mode, Photo mode (tape and card recording (card recording on DM-MV650i E,DM-MV630i E only))

5-5-1 Tape shooting mode Normal motion video mode (Start and Stop button operation: interlaced scanning) or still imagemode (Photo button operation: field still)

Photo mode Still image recording (frame recording; field recording during Card Mix in motion video mode)for approx. 6.5 secondsHalf- push lock display ( ) for photo button in viewfinder: Displayed in green when AF islocked.

5-5-2 Card recording (DM-MV650i E, DM-MV630i E only)When the Photo button is operated in Card Recording mode, Progressive Photo images can besaved as still images onto a MultiMedia Card or SD (Secure Digital) memory card.Motion video and audio can be recorded on memory card by operating Start/ Stop button (DM-MV650i E only).

Recording format DCF (Design rule for Camera File system) compliantImage compression format JPEG format (Motion JPEG for motion video), switchable compression ratio (irreversible) (Su-

per Fine, Fine, Standard), refer to section on memory card system (page 1-20)

Page 20: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-16

5-6 Exposure control5-6-1 AE function

Program AE Full Auto mode, Auto mode, Sports mode, Portrait mode, Spotlight mode, Surf (Sand) & Snowmode, Low Light mode, Low Light + mode (DM-MV650i E: Card and Camera modes only),Night mode, Super Night mode (Super Night mode is DM-MV650i E only)

5-6-2 Photometric system Center- bottom- weighted average :Full Auto mode, Auto mode, Sports mode, Portrait mode, Low Lightmode, Low Light + mode (DM-MV650i E: Card and Camera modesonly), Night mode, Super Night mode (DM-MV650i E only)

Whole area average photometry + 128- segment evaluative photometry :Spotlight mode, Surf (Sand) & Snow mode

Screen segments 128 segments (16H × 8V)5-6-3 Exposure correction function

AE shift AE shift is performed by pressing the AE Shift button. After AE shift, the AE level can becorrected using the multi- dial (except in Full Auto mode, Spotlight mode, Surf & Snow mode(Sand & Snow mode), Night mode or Super Night mode).

AE Shift amount ± 7 levels( –2.0, –1.5, –1.25, –1.0, –0. 75, –0.5, –0. 25, ±0, +0.25, +0.5, +0.75, +1.0, +1.25,+1.5, +2.0).Indicated by a number (AE ± 0) in the viewfinder.

5-6-4 Electronic shutterHigh-speed shutter 1/ 50 second, 1/ 120 second, 1/ 250 second, 1/ 500 second, 1/ 1000 second, 1/ 2000 second (can

be selected in Auto mode)Up to 1/ 250 second in Card mode (DM-MV650i E, DM-MV630i E models)When image stabilizer is ON: 1/ 100 secondWhen image stabilizer is OFF: 1/ 50 second

Low-speed shutter 1/ 12.5 second (Low Light mode, Low Light + mode: constant speed)1/ 50 second to 1/ 6 second (Night mode, Super Night mode)(1/ 6 second to 1/ 500 second automatic setting in Night mode and Super Night mode (DM-MV650i E only))

5-7 AF (Autofocus)5-7-1 System TTL–video signal sensing AF5-7-2 AF range finding area Screen center5-7-3 Range finding window display None.5-7-4 AF operating range 10 mm to infinite (at wide end); 1 m to infinite in full zoom area (from lens front)5-7-5 AF operating illumination range 50 lx - 100,000 lx5-7-6 AF mode switching Continuous AF/ manual focus/ infinity focus. AF can be turned ON/ OFF (by pressing Focus

button) except in Full Auto mode.Manual focus During manual focus (AF OFF), the (MF) display appears in the viewfinder.Infinity focus The shooting distance can be forced to infinity by holding down the ∞ side of the Multi- switch

in the manual focus mode.5-8 Viewfinder 0.33- inch screen, color LCD (approx. 113,000 pixels), ON when LCD monitor is closed (panel

facing inwards) and during mirror shooting5-8-1 Rotation Possible (70° upward to support low- angle shooting)5-8-2 Removal of eyepiece Possible5-8-3 Diopter movement range +1.0 to –5.0 diopter (when eye is at eyepiece)5-8-4 Lens configuration Two elements in two groups

Page 21: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-17

5-9 LCD panel 2.5- inch screen, color LCD, approx. 112,000 pixels (480 (H) × 234 (V)) TFT active matrix drive.RGB delta arrangement; ON except when monitor is closed (panel facing inwards)

5-9-1 Angle adjustment Possible; monitoring is possible for high- angle, low- angle, and during mirror shooting.5-9-2 Information display Color display of operating mode, simple zoom position, remaining battery charge, remaining

tape, data code, warnings and other indications. Information display is not provided during mir-ror shooting.

Relationship between LCD monitor and viewfinder (CVF)

*1 : DM-MV650i E, DM-MV630i E only*2 : Can be set to Mirror mode through menu selection.*3 : During Mirror mode, the screen display is flipped left- right (AE shift, window screen, 16:9, card mix, fader, effect,

shutter speed, date and time display) or does not appear ( / card image quality, and recording size only).

Card Recording mode: No card , Card Present and Access Indicator <<<<(Mirror mode is temporarily turned off during REC search and when a warning is displayed.)

5-10 White balance adjustment TTL 128 segments, new white extraction system FAWB; includes set/ preset (outdoor: 5,600 k;indoor: 3,200 k)(selected through camera menu)

Adjustment range 2,800 k to 8,000 k5-11 Digital feature functions The following modes are provided: Fader, Effects, Multi-screen.

Fader : Can be executed once when Fade mode is displayed in conjunction with pressingthe Start/Stop button (the mode display disappears when Fader ends).

Effects : Effects are sustained until this function is turned off.Multi-screen : A number of images, equal to the number of screen windows, are captured and

displayed manually or each time a fixed number of seconds passes. The displayremains until this function is turned off.

Card mix : A mixture of included sample images, images recorded to a card, and cameramotion video is displayed. (DM-MV650i E, DM-MV630i E model only)

5-11-1 Fader (tape recording only) Audio synchronized faderAuto fade (JAPAN models: White Fade; Overseas models: Black Fade),Wipe, Corner Wipe, Jump, Flip, Puzzle, Zigzag, Beam, Tide.

Fade time Approx. 4 seconds.5-11-2 Effects Art, Black and White, Sepia, Mosaic, Ball, Cube, Wave, Color Mask, Mirror

(Black and White only in card recording mode).The effects function is toggled ON/OFF by pressing the D. Effect button.

5-11-3 Multi-screen (tape recording only; excludes Night mode)Number of screens 4 (2 × 2), 9 (3 × 3), 16 (4 × 4)Operating modes Manual, Fast (every 4 frames), Normal (every 6 frames), Slow (every 8 frames)

During Low Light mode, the settings are Fast (every 4 frames), Normal (every 8 frames), andSlow (every 12 frames)

5-11-4 Card Mix (DM-MV650i E, DM-MV630i E only)Mix type Mix type Card Chroma key, Card Lumi. key, Camera Chroma key (iPAL model not equipped

with Camera Chroma key)Mix level adjustment Adjustable, 32 levels

5-11-5 Availability in operation modes

Camera mode and Card/Camera mode VCR mode/Card Playback mode LCD panel position LCD panel CVF LCD panel CVF

Panel closed (panel facing inwards) OFF ON OFF ON

Panel closed (panel facing outwards) ON OFF ON OFF

Panel open ON OFF ON OFF

Mirror shooting *3 ON *2 ON ON OFF

Camera Card (still image) Card (motion video) Tape (still image) Tape (motion video)

Fader × × ×

Effect Black and White only Black and White only

Multi-screen × ×

Card Mix × ×

Page 22: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-18

5-12 Built-in microphone Stereo (using electret condenser microphone)Stereo provided by 2 nondirectional microphones and electric circuit

5-12-1 Wind screen function Provided, with ON/OFF switch (selected by menu; built-in microphone only)5-13 Other additional functions

5-13-1 Time code Time code Displays recording time (0:00:00 to 7:59:59) and records in sub-code area.5-13-2 Data code Though not displayed during recording, the date and camera information during recording are

automatically recorded and can be displayed during playback.Time and date Automatic calendar range: January 1, 2003 through December 31, 2030 (the initial setting is

January 1, 2003)World clock capability (select the name of your destination city and the date and time are auto-matically adjusted to the local date and time); supports daylight savings time.During playback, time can be displayed in three different modes (date only, time and date, ortime only). (Time and date can be displayed for January 1, 1990 through December 31, 2089.)

Camera data Shutter speed and aperture value information are recorded (but not displayed during recording),and can be displayed during playback.

5-13-3 Accessory shoe Included (advanced accessory shoe: DM-MV650i E only).5-13-4 REC Search mechanism Included. Tape can be played (forward or reverse) by pressing the REC Search button while

camera recording is paused. (When REC Search ends, the camera recording is paused again.)5-13-5 REC Review function Included. Accessed by operating the Recording Check button when camera recording is paused.5-13-6 Zero Set Memory Included. This function allows you to rewind or fast- forward the tape to the position where the

WL- D79/ WL- D80 Zero Set Memory key is pressed (the counter value is set to 0: 00: 00).(During recording, only zero setting is allowed. This function can be used in Playback mode.)

5-13-7 Remote control reception ON/ OFF Possible. This can be done in Camera mode and VCR mode (through menu selection).5-13-8 Headphone volume adjustment Possible. Can be adjusted using the multi- switch.

6 Recorder6-1 Recording functions Camera shooting and recording, DV input recording*, analog input recording* (* : iPAL only)

6-1-1 Recording format Consumer electronics digital DVC (SD specs)6-1-2 Tape speed SD spec Approx. 18.81 mm/ second (in SP mode) , Approx. 12.56 mm/ second (in LP mode)6-1-3 DV input recording Complies with IEEE1394.

Records video/ audio signals from a digital video camera connected through a DV cable.6-1-4 Analog input recording Records analog video/ audio signals using an S Video terminal and AV terminal. (iPAL only)6-1-5 Priority of terminals during recording DV terminal > S Video terminal > AV terminal (iPAL only)

6-2 Insert Recording Possible. (iPAL only)6-2-1 Insert-capable tape Only tapes with SP recording can be used in Insert Recording.

6-3 Audio Dubbing Recording Possible.6-3-1 Audio Dubbing- capable tapes Only tapes with 12- bit/ SP recording (other than 4- channel simultaneous recording) can be used

in Audio Dubbing Recording.6-3-2 Audio dubbing signal input Audio signal from LINE (AV terminal) or microphone (external > internal).6-3-3 Switching To Audio Dubbing Switch by pressing the Audio Dubbing button on the remote control during Playback Pause.

6-4 Playback functions Standard Playback and Superb Playback6-4-1 Standard Playback

a. Video Video recorded in SP and LP modesb. Audio 16-bit Supports the following sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz.

12-bit Sampling frequency: 32 kHzStereo 1, Stereo 2, or mixed playback of Stereo 1 and Stereo 2 (variable mix ratio)

6-4-2 Superb Playback Plays video onlya. Still image playback Pure frame playbackb. Fast-forward playback Approx. 11.5× speed.c. Rewind playback Approx. 11.5× speed.d. Frame playback Forward/reverse frame feedinge. Slow playback Forward/reverse 1/3× speedf. 1× SP playback Forward/reverse 1× speedg. 2× SP playback Forward/reverse 2× speedh. Edit search Forward/reverse 1× speed

6-5 Tape fast-forward/rewind time Approx. 2 minutes. 20 seconds. (using 60-minute tape)

Page 23: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-19

6-6 Input signals6-6-1 DV terminal SD format signals complying with IEEE1394– AV/ C protocol (iPAL only)6-6-2 AV terminal (iPAL only)

a. Video signals PAL standard color video signalsImpedance 75 ΩSignal level 1Vp-p (composite)

b. Audio signalsSignal type Stereo audio signalsImpedance 40 KΩ or higherSignal level −10dBv

6-6-3 S Video terminal (iPAL only)Signal configuration PAL Y/C separated video signalImpedance 75 ΩSignal level 0.3Vp-p (color burst signal)

6-6-4 Microphone terminalImpedance 5 KΩ or higherLevel −57dBv (using 600 Ω microphone)

6-6-5 USB port (DM-MV650i E, DM-MV630i E only)Conforms to USB 1.1.

6-7 Output signals6-7-1 DV terminal Complies with IEEE1394– AV/ C protocol6-7-2 AV terminal

a. Video signalsSignal configuration PAL standard color video signalsOutput impedance 75 ΩOutput signal level 1Vp-p (composite)Horizontal resolution Self re-recording Approx. 430 TV lines (screen center) Camera EE out Approx. 430 TV lines (screen center)

Catalog value: Approx. 430 TV lines (screen center)b. Audio signals

Signal type Stereo audio signalsOutput impedance 3 KΩ or lessOutput signal level −10dBv (with 47 KΩ load)Frequency characteristic 80 Hz to 12 kHz (1 kHz reference ±10 dB range)Audio signal S/N For microphone input 48dB or higher For external microphone input 48dB or higher

6-7-3 S-video terminalSignal configuration PAL Y/C separated video signalVideo signal 1Vp- p (brightness + synchronization signal)Color signal 0.3Vp- p (color burst signal)Brightness signal S/N 45dB or higherHorizontal resolution

Self re-recording Conforms to camera EEoutCamera EE out Approx. 430 TV lines (screen center)

Catalog value: Approx. 400 TV lines (screen center)6-7-4 Headphone terminal Also serves as AV I/ O terminal (switched through menu screen)

Output impedance 47ΩOutput signal level −25dBv (with 16Ω load at maximum volume)

6-7-5 USB port (DM-MV650i E, DM-MV630i E only)Supports USB 1.1.

Compatible computer systems Windows systems : IBM-compatible PC/ ATs, NEC PC98- NX SeriesMacintosh systems : Power Macintosh, PowerBook, iMac, iBook

Computer operating system Windows systems : Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XPMacintosh systems : Mac OS 8. 6 to X

Page 24: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-20

6-8 Memory card system (DM-MV650i E, DM-MV630i E only)6-8-1 Types of memory cards used SD memory card, Multimedia card.6-8-2 Recordable image types and image quality

Camera Card mode Camera still images can be recorded by pressing the Photo button, and motion video can berecorded by operating the Start/ Stop button. (DM-MV650i E only)The Digital Effects function or Multi- screen function can be used.

VCR card mode Still images can be recorded by pressing the Photo button (depress halfway to display still image,depress fully to record) during tape playback, and motion video can be recorded by operating theStart/ Stop button (approx. 10 seconds at 320 × 240 pixels and approx. 30 seconds at 160 × 120pixels, 15 frames/ second). (DM-MV650i E only)Also, DV input still images (no tape loaded or tape stopped) can be recorded by pressing thePhoto button (depress halfway to display DV input still image, depress fully to record), andmotion video (15 frames/ second) can be recorded by operating the Start/ Stop button.

Quality of still images recorded from tape or DV input to card

6-8-3 File names/folder names The following folder names and file names are used for images saved to memory card afterformatting using the Format menu, based on DCF (Design rule for Camera File system) rules,still image (Exif 2.2) file management specifications, and DPOF (Digital Print Order Format)file management specifications.

Card volume label CANON DV

Here, xxx stands for folder number, yyyy for file number, and z for letter from A to Z.* Corresponds to motion video file with same file number.DCF folder and file namd //DCIM/xxxCANON/AUT_yyyy.JPG xxx : Folder No., yyyy : File No.

File number Files are managed internally in the format Folder Number–File Number.Photographed images are assigned file numbers between 0001 and 9900, and 100 image files arestored per folder.Individual folders are assigned numbers from 100 to 998 (but the numbers 199, 299, 399, 499,599, 699, 799, and 899 are not used).

Relationship between folder numbers and file numbers

Photographed images start with the number 101-0101, and as a basic rule are numbered so as tobe greater than the Directory Number–File Number of files residing on a Memory card.

Source Recording mode Image recorded on card Tape photo recording using DM-MV650i E, DM-MV630i E

NTSC/ PAL models Progressive Frame images

Motion video recording NTSC/ PAL models Simple pure frame images DV input NTSC/ PAL models Simple pure frame images Line input NTSC/ PAL models Simple pure frame images

File types Compression format Folder name and file name Still image (Exif) file JPEG //DCIM/xxxCANON/IMG_yyyy.JPG Movie video file Motion JPEG //DCIM/xxxCANON/MVI_yyyy.JPG Motion video thumbnail file * JPEG //DCIM/xxxCANON/MVI_yyyy.THM Photo stitch JPEG //DCIM/xxxCANON/STz_yyyy.JPG Zoom browser JPEG //DCIM/xxxCANON/AUT_yyyy.JPG DPOF file TEXT //MISC/AUTPRINT.MRK Work file TEXT //DCIM/CANONMSC/xxx.tmp

Folder numbers File numbers Stored files

100 0001 0002 0003 ・・・・ 0099 0100 Sample images included at time of shipping

101 0101 0102 0103 ・・・・ 0199 0200

102 0201 0202 0203 ・・・・ 0299 0300

・・・

198 9801 9802 9803 ・・・・ 9899 9900

200 0001 0002 0003 ・・・・ 0099 0100

・・・

998 9801 9802 9803 ・・・・ 9899 9900

Photographed image recording area

Page 25: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-21

6-8-4 Still image recorded image size VGA 640(H) × 480(V) pixelsNumber of recorded still images (SDC-8M)Super Fine mode 35 (file size per image: approx. 175 kb)Fine mode 52 (file size per image: approx. 120 kb)Standard mode 86 (file size per image: approx. 65 kb)

6-8-5 Motion video recorded image size PAL 320(H) × 240(V) pixels, 160(H) × 120(V) pixels 12.5 frame/secondContinuous recording time

Per shot Approx. 10 seconds (Approx. 1.7MB), Approx. 30 second (Approx. 2.7MB)Per size second Approx. 170KB, Approx. 90KB

6-8-6 Card format Cards should be formatted using the format command in the camcorder's menu. Cards formattedon a PC cannot be guaranteed to function properly as they may malfunction depending on theoperating system.

6-8-7 Stitch Assist function This is an effective way to combine (“stitch” together) photographed images to create a pan-oramic image, using a computer. (The supplied PhotoStitch program is used to combine imageson the user’s computer.) The stitch process works by finding the common portions of images thatadjoin each other, so the user should frame images in such a way that the common portionscontain a distinctive subject (a subject that serves as a landmark). The common portions in eachimage should constitute between 30% and 50% of the frame width. Also, unevenness at the topand bottom should not exceed 10% of the frame height.

6-9 Digital feature playback functions The following modes are provided: Fader, Effect, Multi-screen.· Can be executed once when Fader mode is displayed in conjunction with pressing the /

button (the mode display disappears when Fader ends).· Effects : Effects are sustained until this function is turned off.· Multi-screen : A number of images, equal to the number of screen windows, are captured and

displayed manually or each time a fixed time passes. The display remains untilthis function is turned off.

6-9-1 Fader Audio synchronized FaderAs in Photo mode, Auto Fade (Japanese models: White Fade; overseas models: Black Fade),Wipe, Corner Wipe, Jump, Flip, Puzzle, Zigzag, Beam, Tide

Fade time Approx. 4 seconds6-9-2 Effects As in Photo mode, Art, Black and White, Sepia,Mosaic, Ball, Cube, Wave, Color Mask, Mirror

(Black and White only in card recording mode)The effects function is toggled ON/OFF by pressing the D. Effect button.

6-9-3 Multi-screenNumber of screens 4 (2 × 2), 9 (3 × 3), 16 (4 × 4)Operating modes Manual, Fast (every 4 frames), Normal (every 6 frames), Slow (every 8 frames)

6-9-4 Card mix Cannot be used.6-9-5 Availability in operation modes

Playback (VCR/tape) Card playback (VCR/card

(ZR70 MC A, ZR65 MC A only)) Fader × Effects × Multi-screen × Card Mix (ZR70 MC A, ZR65 MC A only)

× ×

Page 26: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-22

6-10 Direct print (DM-MV650i E, DM-MV630i E only)After connecting the camcorder to the BJ 535PD or BJ 895PD camera direct printer using theDIF-100 direct interface cable supplied with the printer, the user can easily print out still imagesstored on a memory card. Compatible with DPOF printer settings (image and number of copies).

6-10-1 Printable images On the DM-MV650i E, DM-MV630i E, still image files stored on an SD memory card orMultiMediaCard only.

6-10-2 Print format Single-image printing. Printing of index sheets is not supported. Supported paper sizes are L,LL, postcard, A4, and card. Refer to the specifications of the BJ 535PD or BJ 895 PD printer forinformation on compatible paper sizes.

6-10-3 Trimming Not supported.6-10-4 Date stamp Not supported.6-10-5 Number of copies printed Can be specified between 1 and 99.

6-11 Other functions6-11-1 Consecutive shooting mechanism Can be used starting in Recording Pause or Stop mode, or starting with the power off. This does

not apply to cases where the cassette has been removed.6-11-2 Automatic stop function This function is activated in the following cases:

· When forward still image playback is continued for approx. 5 minutes, or reverse still imageplayback is continued for approx. 5minutes

· When a condensation warning is displayed· When the tape end or beginning is reached

6-11-3 Automatic power-off mechanismCamera tape mode After recording has been paused continuously for approximately 5 minutes. When the battery

voltage drops below the specified value.Camera card mode After a period of approximately 5 minutes elapses with the card inserted. When the battery

voltage drops below the specified value.6-11-4 Time code Automatically written during recording. Time code values range from 0:00:00:00 to 7:59:59:24

(hours:minutes:seconds:frames).6-11-5 Photo search This function searches for images shot in Photo mode.

Forward/reverse photo search (use the , keys on the remote control after selecting Photo

Search with the remote control Search Select key)Values can be entered in a range of up to the ± 10th photo from the current position.

6-11-6 Date search If there is more than one recording date, this function cue up to the position where the datechanges.Forward/reverse date search (use the , keys on the remote control after selecting Date

Search with the remote control Search Select key)Values can be entered in a range of up to the ± 10th photo from the current position.

6-11-7 World clock display After setting a reference city (the city where the clock's time is set), when you take a picture,select the name of the city where you are shooting. The date and time will be automaticallychanged to the local date and time, and recorded in the data code.

6-11-8 Speaker Built-in speaker. with volume adjustment6-11-9 File transfer (DM-MV650i E, DM-MV630i E only)

When the USB port on the PC and the USB port on the camcorder are connected using theincluded interface cable (IFC-300PCU), still images (JPEG files) and motion video (MotionJPEG files) recorded on the memory card can be transferred to the PC.If the "ZoomBrowser" program (for Windows) or "ImageBrowser" program (for Macintosh) onthe included Digital Video Solution Disk is installed on the PC in advance, you can transfer thedesired images to the PC while viewing thumbnails of the still images recorded on the memorycard.

6-11-10 A/D conversion (not applicable to PAL models)This function performs real-time conversion of analog AV signals input to the AV terminal intodigital DV signals and outputs them through the DV terminal.When an 8 mm video player or VHS video player is connected with the camcorder using an AVcable, and the camcorder is connected to a PC using a DV cable, playback images can be trans-ferred from the 8 mm tape or VHS tape to the PC. (Under the VCR settings on the VCR menuscreen, set "AV input → DV Output" to ON.

Page 27: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-23

6-11-11 Playback zoom When viewing images recorded on tape or card (DM-MV650i E, DM-MV630i E only,still im-ages only), moving the Zoom lever to the Telephoto side causes the image being displayed toappear at 2x magnification. Moving the Zoom lever back to the Wide side causes the image to bedisplayed at its original (unmagnified) size.When viewing an enlarged image, the Multi-dial can be used to change the portion of the imagethat is displayed. (In LCD monitor, a frame indicating the magnified portion is displayed alongwith and indications showing the directions in which movement is possible using theMulti-dial.) To toggle between up-down and left-right movement, the user presses the Multi-

dial. (The default setting when switching to 2x magnification is left-right movement.)6-11-12 Battery charge function By connecting to Canon compact power adapter CA-570, the battery pack installed at the battery

pack installing section can be charged. (When charging is performed, the charge lamp flashes (1-flash for the charged amount ranged from 0% to approx. 75%; 2-flash for the charged amountranged from 75% to 95%) or lights up (at full charge, that is, 95% or more.)

Charging time BP-508: Approx. 110 min., BP-511/512: Approx. 120 min.,(with power supply switch OFF) BP-522: Approx. 210 min., BP-535: Approx. 310 min.

7 Terminals and ports7-1 DV terminal Special 4-pin connector (IEEE1394 compatible); input and output (Output only on PAL models)7-2 S-video terminal 4-pin mini-DIN, input and output (Output only on PAL models)7-3 AV (Video/audio) terminal φ 3.5mm, 4-pole pin jack (yellow); input and output (Output only on PAL models)

also serves as headphone terminal7-4 External microphone input terminal φ 3.5mm stereo mini jack7-5 Headphone terminal φ 3.5mm stereo mini jack (also serves as AV terminal)7-6 Memory card connection terminal Special multi-pin (DM-MV650i E, DM-MV630i E only)7-7 Battery terminal Special 3-pin7-8 DC IN terminal φ 3.4mm jack7-9 USB port 5-pin (mini-B Receptacle; DM-MV650i E, DM-MV630i E only)

8 Power supply8-1 Input power 7.4V DC (battery pack), 8.4V DC (DC IN).8-2 Power consumption DM-MV650i E During shooting : Approx. 2.9 W (using CVF); approx. 3.8 W (using LCD monitor)

During playback : Approx. 4.2 W (using LCD monitor)DM-MV630i E During shooting : Approx. 2.9 W (using CVF); approx. 3.8 W (using LCD monitor)

During playback : Approx. 4.2 W (using LCD monitor)DM-MV600i E, 600 E, 590 E During shooting : Approx. 2.9 W (using CVF); approx. 3.8 W (using LCD monitor)

During playback : Approx. 4.2 W (using LCD monitor)9 Dimensions (W × H × D) Approx. 58 × 103 × 147 mm (approx. 2.3 in × 4.1 × 5.8 in) (excluding small projections)10 Weight

10-1 Camcorder alone DM-MV650i E Approx. 525 g (approx. 1.2 lb)DM-MV630i E Approx. 520 g (approx. 1.1 lb)

DM-MV600i E, 600 E, 590 E Approx. 520 g (approx. 1.1 lb)10-2 Total equipped weight DM-MV650i E Approx. 625 g (approx. 1.4 lb) *1

DM-MV630i E Approx. 610 g (approx. 1.3 lb) *2DM-MV600i E, 600 E, 590 E Approx. 610 g (approx. 1.3 lb) *3

*1 : (including BP-512, DVM-E30, lens cap, coin-type lithium battery, SDC-8M, grip belt)*2 : (including BP-508, DVM-E30, lens cap, coin-type lithium battery, SDC-8M, grip belt)*3 : (including BP-508, DVM-E30, lens cap, coin-type lithium battery, grip belt)

11 Temperature and humidity requirements11-1 Temperature and humidity requirements for performance

0°C to 40°C, maximum 85% relative humidity11-2 Temperature and humidity requirements for operation

−5°C to 45°C, maximum 65% relative humidity

Page 28: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-24

4. System Diagram (Common to all Models)

Fig. 1-2

MV650i MV630i

MultiMediaCard

IFC-300PCU USB Cable

PC Card Adapter

USB Reader/Writer

FD Adapter

VL-10Li BatteryVideo Light

Stereo Microphone (commercially

WL-D80 Wireless Controller

WL-D79 Wireless Controller

MiniDV VideoCassette

CG-570 Battery Charger

CA-570 Compact Power Adapter

TV

VCR

SC-1000 Soft

S-150 S-video Cable

BP-500 Series Battery Pack

CB-570Car Battery Cable

Computer

CV-150F/CV-250FDV Cable

BP-500 Series Battery Pack

STV-250N

PC-A10 SCARTAdapter

WA-30.5Wide Attachment

FS-30.5U Filter Set

VL-3 Video Light

DM-50 DirectionalStereo Microphone

SS-800 Shoulder Strap

WS-20 Wrist Strap

MV650i

MV650i MV630i

MV600i MV600

MV650i

MV650i

WD-30.5Wide- converter

TL-30.5Tele- converter

BP-900 Series Battery Pack*

available)

Carrying Case

Bubble Jet Printer with direct print function

SD Memory Card

Digital Device

StereoVideo Cable

Page 29: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-25

MENU INDICATION PAL MODEL REMARKS

Camera mode

Zoom display

(displayed for approx.

four seconds after zooming)

Optical zooming W T

88 × digital zooming W T For DM-MV630i E at 80×

and DM-MV600i E, 600 E, 590 E at 72×

440 × digital zooming W T For DM-MV630i E at 400×

and DM-MV600i E, 600 E, 590 E at 360×

Zooming stopped W T

Zoominging to tele end W T

Zoominging to wide end W T

Image stabilizer display

The image stabilizer is ON

The image stabilizer is OFF No display

Recording mode display

SD mode During SP recording

During LP recording

Operation mode display During mirror shooting mirror mode (LCD)

Recording Red display

Record pause Green display

Playback is stopped Green display

Cassette is ejected Green display

+ REC search Green display

− REC search Green display

5. Overview of Viewfinder / LCD Panel Displays

5-1 Camera Mode

Page 30: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-26

MENU INDICATION PAL MODEL REMARKS

Program AE mode display

Full Auto mode is selected

Auto mode is selected

Sports mode is selected

Portrait mode is selected

Spotlight mode is selected

Surf & snow mode is selected

Low light mode is selected

Night mode is selected

Super Night mode is selected DM-MV650i E only

Program AE mode menu

Super Night mode is for DM-MV650i E only.

Tape counter display

Time code display

Not entered

Zero Set Memory M

M

M

Not entered M

AE shift display

Minimum exposure value

When standard value is set

Maximum exposure value

During AE No display

Page 31: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-27

MENU INDICATION PAL MODEL REMARKS

Timer display

Remaining tape display

At end of tape

Not entered

Tape warning display Flashes red

Other No display

Focus mode display

AF OFF

Infinity focus

AF ON No display

Self timer display

Self timer standby

Timer operating

Other No display

Battery power display

Approx. 75% remaining. Approx. 50% remaining. Approx. 25% remaining. Approx. 0% remaining. Flashes red

Power adapter is connected No display

Page 32: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-28

MENU INDICATION PAL MODEL REMARKS

Shutter speed display

1/60 sec.

1/100 sec.

1/250 sec.

1/500 sec.

1/1000 sec.

1/2000 sec.

Auto No display

White balance display

Set

Indoor preset

Outdoor preset

Auto No display

Condensation warning display

Remote sensor code display

Code 1 setting

Code 2 setting

Sensor OFF

Headphone volume adjustment display

Volume OFF

Card mix display

(For DM-MV650i E, DM-MV630i E only)

Page 33: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-29

MENU INDICATION PAL MODEL REMARKS

Digital feature display

Fade Tigger

Wipe (horizontal)

Corner Wipe

Jump

Flip

Puzzle

Zigzag

Beam

Tide

Art

Black and White

Sepia

Mosaic

Ball

Cube

Wave

Color Mask

Mirror

Multi-screen

Feature OFF No display

Digital feature menu

Page 34: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-30

OFF

In Fader Selection

In Effect Selection

In Multi Screen Selection In Multi Screen Speed Selection

In Multi Screen Count Selection

Digital Feature selection

Press the “D.E. SEL” button in Camera mode, VCR mode, or Card Recording mode.The line where the cursor is located in the menu is surrounded with a turquoise frame.The previously selected items and the corresponding settings are shown in yellow.

Page 35: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-31

MENU INDICATION PAL MODEL REMARKS

Wind screen display

Wind screen ON ON

Wind screen OFF No display

Time and date display

When time and date are not set

Audio mode display

16-bit is selected

12-bit is selected

16 : 9 mode display

16:9 mode is selected

Other No display

Half-press lock display

Photo mode display

Normal recording No display

Photo mode is selected

Page 36: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-32

5-2 VCR Mode

MENU INDICATION PAL MODEL REMARKS

VCR mode

Audio output display

12-bit Stereo 1 is selected

12-bit Stereo 2 is selected

12-bit Mix 1:1 is selected

12-bit Mix variable is selected

16-bit No display

Audio Mix Balance display

ST-1:ST-2 = 1:0

ST-1:ST-2 = 1:1

ST-1:ST-2 = 0:1

Recording mode display

During SP recording Not applicable to PAL models.

During LP recording Not applicable to PAL models.

Operating mode display

During Recording Red display

During Recording pause

Cassette is ejected

Playback is stopped

Playback

Fast-forward

Rewind

No tape

Fast-forward playback

2× SP playback

1× SP playback

Slow playback

Frame advance playback

Page 37: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-33

MENU INDICATION PAL MODEL REMARKS

Still image playback

Reverse still image playback

Frame reverse playback

Slow reverse playback

1× SP reverse playback

2× SP reverse playback

Rewind playback

Forward edit search

Reverse edit search

Forward date/photo search

Reverse date/photo search

FF return

REW return

AV insert pause

AV insert recording

Audio dubbing pause

Audio dubbing recording Red display

Tape counter

Time code display

Not entered

Zero set memory Same as during Camera mode

Remaining tape display Same as during Camera mode

Audio dubbing/insert or

search operation display

AV insert is selected No function for PAL models.

Audio dubbing is selected No display for PAL models.

Date search operation

Still image photo search operation

Other than search No display

Battery power display Same as during Camera mode

Page 38: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-34

MENU INDICATION PAL MODEL REMARKS

Remote sensor code display Same as during Camera mode

Battery warning display Same as during Camera mode

Condensation warning display Same as during Camera mode

Speaker volume adjustment display

Volume OFF

Headphone volume adjustment display Same as during Camera mode

Data code display

Data code setting

Date and time Camera data Date and time & camera data

Date &

time

setting

Time

setting

Date

setting

Date

andtimeselection

Camera data

F-number display

F-number closed This product has no F-number full-close

When not entered function.

Shutter speed display The shutter speed of this product ranges from 1/6, 1/50 to 1/2000 sec.

When not entered

Page 39: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-35

MENU INDICATION PAL MODEL REMARKS

Time display

Time setting is selected

Not entered

Time and time setting are selected

Not entered

Date display

Not entered

Wind screen display Same as during Camera mode

Audio data display

Audio dubbing/audio input terminal No display (function) models.

Audio dubbing/micro-phone No display for PAL models.

input terminal

Audio mode display Same as during Camera mode

16 : 9 mode display Same as during Camera mode

DV display

During DV input No display (function) models.

AV input → DV signal conversion No display (function) models.

Other No display

Page 40: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-36

5-3 Card/Camera Mode (DM-MV650i E, DM-MV630i E only)

MENU INDICATION PAL MODEL REMARKS

Card / Camera mode

Zoom display Same as during Camera mode

Card recording image quality display

Program AE mode display

Full Auto mode

Auto mode

Sports mode

Portrait mode

Spotlight mode

Surf & snow mode

Low light mode

Low light + mode DM-MV650i E only

Stitch assist number of

photos display

Card access display

Page 41: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-37

MENU INDICATION PAL MODEL REMARKS

Card free space display

No card (flashes red) Accidental erasure protection

9999 or more images can be recorded

99 images can be recorded displayed green for 6 or more images

5 images can be recorded displayed yellow for 1 to 5 images

0 images can be recorded displayed red for 0 images

AE shift display Same as during Camera mode

Card motion video recording time display

320 × 240 pixels

160 × 120 pixels

Still image size display

1024 × 768 pixels

640 × 480 pixels

Motion video size display

(DM-MV650i E only) ×

160 × 120 pixels

Focus mode display Same as during Camera mode

Self timer display Same as during Camera mode

Battery power display Same as during Camera mode

Shutter speed display

Lithium battery low-power warning display Same as during Camera mode

Remote sensor code display Same as during Camera mode

White balance display Same as during Camera mode

Battery low-power warning display Same as during Camera mode

Condensation warning display Same as during Camera mode

Page 42: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-38

MENU INDICATION PAL MODEL REMARKS

Digital feature display Same as during Camera mode

(but with no fader function)

Time and date display Same as during Camera mode

(Date and time only)

Half-press lock display Same as during Camera mode

Page 43: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-39

5-4 Card Playback Mode (DM-MV650i E, DM-MV630i E only)

MENU INDICATION PAL MODEL REMARKS

Card play mode

Slideshow display

DPOP designation display

Protect mark display

DCF file name display

Directory Number-File Number

Card access display

Writting to card Shown in red, displayed in sequence

Reading from card Shown in green, displayed in sequence

Page 44: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-40

MENU INDICATION PAL MODEL REMARKS

Image number display

No card Flashes red

Checking number of images recorded on card

0 recorded images

9th of 99 recorded images

99th of 99 recorded images

9999th of 9999 recorded images

Image size display

Volume display (DM-MV650i E only) Same as during VCR mode During moving image playback

Data code display Same as during VCR mode

(Date and time only)

Slideshow operation guidance display

During slideshow execution

Page 45: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-41

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

5-5 Menu Display

Camera mode, VCR mode, Card/Camera mode, and Card Playback mode are provided in the menu display.

Camera Mode

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

CARD MIX *1 Go to Card mix selection screen

CAM. SET UP SHUTTER AUTO AUTO Lithium battery1/501/1201/2501/5001/10001/2000

D. ZOOM OFF 88× / 80× / 72× Lithium battery88× / 80× / 72×440× / 400× / 360×

IMAGE S. ON ON Lithium batteryOFF

16 : 9 ON OFF Lithium batteryOFF

WHIT BAL. AUTO AUTO Lithium batterySETINDOOROUTDOOR

RETURNVCR SET UP REC MODE SP SP Lithium battery

LPAV/PHONES AV AV Lithium battery

PHONES RETURN

AUD. SET UP WIND SCREEN ON ON Lithium batteryOFF

AUDIO MODE 16 bit 12 bit Lithium battery12 bit

RETURNDISP. SET UP BRIGHTNESS *2 Lithium battery

LCD MIRROR *2 ON ON Lithium batteryOFF

TV SCREEN ON ON Lithium batteryOFF

D/T DISPLAY *2 ON OFF Lithium batteryOFF

Page 46: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-42

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

DISP. SET UP DEMO MODE ON OFF Lithium batteryOFF

RETURNSYSTEM BUTTON LIGHT *3 ON ON Lithium battery

PUSH ONOFF

LIGHT COLOR *3 GREEN TURQUOISE Lithium batteryORANGEBLUEYELLOWTURQUOISEPURPLE

WL REMOTE *4 Lithium battery

OFF BEEP *2 ON ON Lithium battery

OFFT. ZONE/DST *4 LONDON PARIS Lithium battery

LONDONPARISPARIS· · · · · ·CAIROMOSCOWDUBAIKARACHIDACCABANGKOKH.KONGTOKYOSYDNEYSOLOMONWELLGTNSAMOAHONOLU.ANCHORL.A.DENVERCHICAGON.Y.CARACASRIOFERNEN.· · · · · ·AZORESAZORES

D/TIME SEL *4 1. JAN. 2003 1. JAN. 2003 Lithium battery12:00 AM 12:00 AM 31. DEC. 203011:59 PM

RETURN

Page 47: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-43

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

*1 : DM-MV650i E, DM-MV630i E model only.*2 : BEEP, BRIGHTNESS, MIRROR, and D/T DISPLAY information is not displayed on screens other than the menu

screen.*3 : DM-MV650i E model only.*4 : On screens other than the menu screen, displayed for 4 seconds at power-on and when the menu is closed. Note that

this applies to the D/TIME SEL only when OFF is selected for D/T DISPLAY. Also, WL. REMOTE “OFF ( )” isdisplayed at all times.

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

MY CAMERA SHTR SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S-UP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S/STOP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

SELF-T SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

RETURN CLOSE MENU

Page 48: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-44

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

VCR Mode

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

VCR SET UP REC MODE *6 SP SP Lithium batteryLP

AV/PHONES AV AV Lithium batteryPHONES

AV DV OUT *6 ON OFF Reset when power isOFF turned off

RETURNAUD. SET UP OUTPUT CH *1 L/R L/R Reset when power is

L/L turned offR/R

AUDIO MODE *6 16bit 12bit Lithium battery12bit

12 bit AUDIO OUT STEREO 1 STEREO 1 Reset when power isSTEREO 2 turned offMIX/FIXEDMIX/VARI.

MIX BALANCE Lithium battery

AUDIO DUB. *6 AUDIO IN AUDIO IN Lithium batteryMIC. IN

WIND SCREEN ON ON Lithium batteryOFF

RETURNCARD SET UP *2 SI QUALITY SUPER FINE FINE Lithium battery

FINENORMAL

MOVIE SIZE 320 × 240 320 × 240 Lithium battery160 × 120

IMAGE NOS. RESET CONTINUOUS Lithium batteryCONTINUOUS

RETURNCARD OPER. *2 COPY [ ] ] Go to Copy execution screen

RETURNDISP. SET UP BRIGHTNESS *1 Lithium battery

DISPLAYS ON ON Lithium batteryOFF

6 SEC. DATE *1 ON OFF Lithium batteryOFF

DATA CODE *3 DATE/TIME DATE/TIME Lithium batteryCAMERA DATACAM. & D/T

D/TIME SEL *3 DATE DATE & TIME Lithium batteryTIMEDATE & TIME

RETURN

Page 49: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-45

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

SYSTEM BUTTON LIGHT *4 ON ON Lithium batteryPUSH ONOFF

LIGHT COLOR *4 GREEN GREEN Lithium batteryORANGEBLUEYELLOWTURQUOISEPURPLE

WL REMOTE *2 Lithium battery

OFF BEEP *1 ON ON Lithium battery

OFFT. ZONE/DST *5 LONDON PARIS Lithium battery

LONDONPARISPARIS· · · · · ·CAIROMOSCOWDUBAIKARACHIDACCABANGKOKH.KONGTOKYOSYDNEYSOLOMONWELLGTNSAMOAHONOLU.ANCHORL.A.DENVERCHICAGON.Y.CARACASRIOFERNEN.· · · · · ·AZORESAZORES

D/TIME SEL *5 1. JAN. 2003 1. JAN. 2003 Lithium battery12:00 AM 12:00 AM 31. DEC. 203011:59 PM

RETURN

Page 50: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-46

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

*1 : BRIGHTNESS, 6 SEC. DATE, OUTPUT CH, and BEEP information is not displayed on screens other than the menuscreen.

*2 : DM-MV650i E, DM-MV630i E model only.*3 : Displayed only when DATA CODE is ON on screens other than the menu screen.*4 : DM-MV650i E model only.*5 : On screens other than the menu screen, displayed for 4 seconds at power-on and when the menu is closed. Note that

this applies to the D/TIME SEL only when OFF is selected for D/T DISPLAY.*6 : Does not function on PAL model (no menu item).

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

MY CAMERA SHTR SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S-UP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S/STOP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

SELF-T SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

RETURN CLOSE MENU

Page 51: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-47

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

Card Camera Mode (DM-MV650i E, DM-MV630i E only)

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

CAM. SET UP SHUTTER AUTO AUTO Lithium battery1/501/1201/250

WHIT BAL AUTO AUTO Lithium batterySETINDOOROUTDOOR

RETURNCARD SET UP SI QUALITY SUPER FINE FINE Lithium battery

FINENORMAL

SI SIZE 1024 × 768 1024 × 768 Lithium battery640 × 480

MOVIE SIZE 320 × 240 320 × 240 Lithium battery160 × 120

FILE NOS. *1 RESET CONTINUOS Lithium batteryCONTINUOS

RETURNVCR SET UP AV/PHONES AV AV Lithium battery

PHONES RETURN

AUD. SET UP WIND SCREEN ON ON Lithium batteryOFF

RETURNDISP. SET UP BRIGHTNESS *2 Lithium battery

LCD MIRROR *2 ON ON Lithium batteryOFF

TV SCREEN ON ON Lithium batteryOFF

D/T DISPLAY *2 ON OFF Lithium batteryOFF

DEMO MODE ON OFF Lithium batteryOFF

RETURNSYSTEM BUTTON LIGHT *3 ON ON Lithium battery

PUSH ONOFF

LIGHT COLOR *3 GREEN BLUE Lithium batteryORANGEBLUEYELLOWTURQUOISEPURPLE

WL REMOTE *2 Lithium battery

OFF BEEP *2 ON ON Lithium battery

OFF

Page 52: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-48

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

*1 : BEEP, BRIGHTNESS, MIRROR, D/T DISPLAY, FILE NOS., and SHTR SOUND information is not displayed on screensother than the menu screen.

*2 : On screens other than the menu screen, displayed for 4 seconds at power-on and when the menu is closed. Note thatthis applies to the D/TIME SEL only when OFF is selected for D/T DISPLAY. Also, WL. REMOTE “OFF ( )” isdisplayed at all times.

*3 : DM-MV650i E model only.

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

SYSTEM T. ZONE/DST *2 LONDON PARIS Lithium batteryLONDONPARISPARIS· · · · · ·CAIROMOSCOWDUBAIKARACHIDACCABANGKOKH.KONGTOKYOSYDNEYSOLOMONWELLGTNSAMOAHONOLU.ANCHORL.A.DENVERCHICAGON.Y.CARACASRIOFERNEN.· · · · · ·AZORESAZORES

D/TIME SEL *2 1. JAN. 2003 1. JAN. 2003 Lithium battery12:00 AM 12:00 AM 31. DEC. 203011:59 PM

RETURNMY CAMERA SHTR SOUND PATTERN1 PATTERN1 LITHIUM BATTERY

PATTERN2PATTERN3

S-UP SOUND PATTERN1 PATTERN1 LITHIUM BATTERYPATTERN2PATTERN3

S/STOP SOUND PATTERN1 PATTERN1 LITHIUM BATTERYPATTERN2PATTERN3

SELF-T SOUND PATTERN1 PATTERN1 LITHIUM BATTERYPATTERN2PATTERN3

RETURN CLOSE MENU

Page 53: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-49

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

Card Playback Mode (Card/VCR Mode) (DM-MV650i E, DM-MV630i E only)

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

CARD OPER. COPY [ ] Go to the Copy execution screen(Single screen)

PRINT ORDERS Go to the Print oders allerase screen ALLERASEIMAGE ERASE Go to the Image erase screen

FORMAT Go to the Format screen

RETURNCARD OPER. PROTECT Go to Image Protect screen(Index screen)

PRINT ORDER Go to Print order screen

RETURNVCR SET UP REC MODE SP SP Lithium battery

LPAV/PHONES AV AV Reset when power is

PHONES turned off RETURN

DISP. SET UP BRIGHTNESS *1 Lithium battery

DISPLAY ON ON Lithium batteryOFF

D/TIME SEL *2 DATE DATE & TIME Lithium batteryTIMEDATE & TIME

RETURNSYSTEM BUTTON LIGHT *3 ON ON Lithium battery

PUSH ONOFF

LIGHT COLOR *3 GREEN YELLOW Lithium batteryORANGEBLUEYELLOWTURQUOISEPURPLE

WL REMOTE *1 Lithium battery

OFF BEEP *2 ON ON Lithium battery

OFF

Page 54: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-50

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

SYSTEM T. ZONE/DST *4 LONDON PARIS Lithium batteryLONDONPARISPARIS· · · · · ·CAIROMOSCOWDUBAIKARACHIDACCABANGKOKH.KONGTOKYOSYDNEYSOLOMONWELLGTNSAMOAHONOLU.ANCHORL.A.DENVERCHICAGON.Y.CARACASRIOFERNEN.· · · · · ·AZORESAZORES

D/TIME SEL *4 1. JAN. 2003 1. JAN. 2003 Lithium battery12:00 AM 12:00 AM 31. DEC. 203011:59 PM

RETURN PRINT ORDER *5 Go to the Print order screen

Page 55: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

1-51

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

*1: BRIGHTNESS and BEEP information is not displayed on screens other than the menu screen.*2: Displayed only when DATA CODE is ON on screens other than the menu screen.*3: DM-MV650i E model only.*4: On screens other than the menu screen, displayed for 4 seconds at power-on and when the menu is closed.*5: Displayed only when connected to a camera direct printer. Note that this applies to the D/TIME SEL only when OFF

is selected for D/T DISPLAY.

MAIN MENU ITEM SUB MENU ITEM SETTINGS DEFAULT BACKUP

MY CAMERA CREATE START-UP Go to the Startup screen creation screen

SEL. S-UP IMG NO PICTURE CANON LOGO Lithium batteryCANON LOGOMY PICTURE

SHTR SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S-UP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

S/STOP SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

SELF-T SOUND PATTERN1 PATTERN1 Lithium batteryPATTERN2PATTERN3

RETURN RETURN

Page 56: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-52

MENU INDICATION PAL MODEL REMARKS

Slideshow screen

Index screen

Image protect screen

Print order screen

5-6 Card-Related Screen Displays

Page 57: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-53

MENU INDICATION PAL MODEL REMARKS

Copy screen

Copy ( ) selection screen

Copy ( ) execution screen

Copy ( ) selection screen

Copy ( ) execution screen

Page 58: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-54

MENU INDICATION PAL MODEL REMARKS

Image erase screen

Image erase selection screen

Erasing one image

Warning: Erasing in progress

Erasing all images

Page 59: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-55

MENU INDICATION PAL MODEL REMARKS

Format screen

Format execution confirmation screen

Format execution screen

Page 60: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-56

MENU INDICATION PAL MODEL REMARKS

Card mix selection screen

Mix type setting screen

Animation type setting screen

Mix level setting screen

Page 61: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-57

MENU INDICATION PAL MODEL REMARKS

Stitch assist screen

My camera settings

My camera settings screen

Startup image creation screen

Select recording position

Page 62: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-58

MENU INDICATION PAL MODEL REMARKS

My camera settings

Record execution confirmation

Message during image creation

Startup image selection screen

Shutter sound selection screen

Startup sound selection screen

Page 63: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-59

MENU INDICATION PAL MODEL REMARKS

My camera settings

Start/stop selection screen

Self-timer sound selection screen

PC connection screen displays

USB connection

IEEE1394 connection

Page 64: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-60

MENU INDICATION PAL MODEL

Direct print setting screen

Direct print setting initial screen

Print selection screen

L SizeBorderless

Style

Copies1

Print Cancel

Now printing (1/1)

SET

L SizeBorderless

Print stop screen

L SizeBorderless

OK Cancel

Two sheets remain.Cancel ?

Two sheets remain.Cancel ?

SET

L SizeBorderless

OK Cancel

Cancel

Now printing (1/3)

L SizeBorderless

SET

SET

L SizeBorderless

Style

Copies1

OK Cancel

SET

Direct Print Cancel

Cancel selection screen

5-7 Direct Print Setting Screen

Page 65: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-61

MENU INDICATION PAL MODEL

Direct print setting screen

Number of copies setting screen

L SizeBordered

Style

Copies

Print Cancel

SW

1

L SizeBordered

Style

Copies

Print Cancel

SET

L SizeBordered

Style

Copies

Print Cancel

2

L SizeBordered

Style

Copies

Print Cancel

(Quantity set by Multi switch)

Setting 1 Setting 2

Page 66: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-62

MENU INDICATION PAL MODEL

Direct print setting screen

Style setting screen

SET

SELECT

SET

Style

Paper Setting

L Size

Paper Setting

L Size

SET

MENU

SELECT

Go to the style setting screen using MENU buttons

MENU

MENU

L SizeBorderless

Style

Copies

Print Cancel

1

L SizeBorderless

Style

Copies

Print Cancel

1

Style

Paper Setting

LL Size

MENU

Style

Borders

Borderless

MENU

Style

Borders

Borderless

MENU

Style

Borders

Bordered

MENU

Style

SELECT

Page 67: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-63

MENU INDICATION PAL MODEL

OK screen

L Size9999Borderless

Style

ResumeOK Cancel

Now Printing (1/9999)Print all marketed images

SET

SET

L Size9999Borderless

Cancel

Print stop screen

L Size9999Borderless

OK Cancel

Set-print Mode cancel.

Now Printing (1/9999) Cancel ?

SET

SET

L Size9999Borderless

Cancel

Print restart screen

L Size9999Borderless

Style

OKResume

Cancel

Now Printing (1/9999)Print remaining Images.

SET

L Size9999Borderless

Cancel

Style setting screen

L Size9999Borderless

Style

OKResume

Cancel

Style is changed.

SET

L Size9999Borderless

OKResume

Cancel

Go to the stylesetting screen

Style is changed.

5-8 Print

Page 68: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-64

5-9 Warning Displays

COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED• When copy-protected tape is played.

COPYRIGHT PROTECTED DUBBING RESTRICTED• When copy protection information is detected during DV input or LINE input, or when the signal output from the television or

VCR is garbled during analog input.

SET THE TIME ZONE, DATE AND TIME• When the power is turned on without setting the area and/or time and date.

REMOVE THE CASSETTE• When a cassette is inserted while there is a mechanical error or condensation in the unit.

CHECK THE DV INPUT• When “REC” is pressed in a mode that allows transition to REC, without a connection to DV input, or in a condition where the

connected DV input cannot be recognized.

CHANGE THE BATTERY PACK• When the battery power is low.

CONDENSATION HAS BEEN DETECTED• When condensation is detected (if a cassette is inserted, a “REMOVE THE CASSETTE” message appears).

THE TAPE IS SET FOR ERASURE PREVENTION• When “REC” is pressed in a mode that allows transition to REC in VCR mode, if the cassette is set for erasure prevention. In

Camera mode, when the power is turned ON, when the “Start/Stop” button is pressed, and when a cassette is inserted, if thecassette is set for erasure prevention.

TAPE END• When the tape end is detected, or when a key (FF, PLAY, etc.) which drives the tape forward is pressed in a mode that allows

transition to forward driving during the detection process.

CHECK THE CASSETTE [REC MODE]• When the Audio Dubbing or AV Insert button is pressed at a tape position recorded in LP/ESP/ELP; or when LP mode is

detected during Audio Dubbing or AV Insert.

CHECK THE CASSETTE [AUDIO MODE]• When the Audio Dubbing button is pressed at a tape position with 16-bit or 4-channel simultaneous recording; or when 16-bit

mode or 4-channel simultaneous recording mode is detected during Audio Dubbing.

CHECK THE CASSETTE [BLANK]• When a blank tape area is detected during Audio Dubbing or AV Insert.

Page 69: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-65

CARD ERROR• When a card error occurs and data cannot be recorded on the card (for DM-MV650i E, DM-MV630i E model).

CARD FULL• When the card is full (for DM-MV650i E, DM-MV630i E model).

NAMING ERROR• When the maximum number of file numbers and directory numbers are created (for DM-MV650i E, DM-MV630i E model).

UNIDENTIFIABLE IMAGE• When an attempt is made to play an image in an unplayable format, an incompatible JPEG image, or an image with corrupt data

(for DM-MV650i E, DM-MV630i E model).

PRINT ORDER ERROR• When there are too many print marks (201 or more), or when a mark file cannot be edited (for DM-MV650i E, DM-MV630i E

model).

NO CARD• When there is no card in the camcorder socket (for DM-MV650i E, DM-MV630i E model).

NO IMAGES• When there are no images to be played in the card (for DM-MV650i E, DM-MV630i E model).

THE CARD IS SET FOR ERASURE PREVENTION• When an attempt is made to record on an SD card set for erasure prevention, in a mode that allows card recording (VCR mode,

Card Recording mode) (for DM-MV650i E, DM-MV630i E model).

NOW CREATING START-UP IMAGE• The startup image is being written to flash memory (for DM-MV650i E, DM-MV630i E model).

CARD MODE• When Start/Stop button is pressed in the Camera mode (for DM-MV630i E model).

** A warning (warning text) is displayed for approx. four seconds in the center of the screen when an abnormality, etc. occurs.** While the warning (warning text) is displayed, only actions enabling a mode transition are accepted. The warning display disap-

pears simultaneous with the acceptance of such an action.

Page 70: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-66

6. Backing Up Various Data

6-1 Backup by Main Power Supply

The condensation timer is backed up by the main power supply alone.

6-2 Backup by Main Power Supply or Backup Power Supply (Lithium Coin Primary Battery)

The table below lists the item (excluding menu items) backed up by the main power supply or backup power supply (lithium coinprimary battery).

Item Default Remarks

Digital zoom position Optical tele end

WB data (SET) - - - -

Time and date settings (auto date) 2003. 1.1 12:00 AM

Menu cursor position Very top

Time code - - - -

Mix balance (DM-MV650i E, DM-MV630i E only) Center

Headphone volume Center

Speaker volume Center

Mechanical errors - - - -

Page 71: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-67

6-3 Backup Conditions Related to Switch Operation

6-3-1 Turning OFF the Power

When Camera mode is in “ (Program AE)” mode.

In (Full Auto) mode, after the power is turned on (Camera), the specifications are the same as in 6-3-3 (Switching to “FullAuto”).

* CAM : Camera mode only *CD : Card Recording mode only (DM-MV650i E, DM-MV630i E only)* Independent : Independent backup for Card/Camera mode, Camera mode, and VCR mode

The card recording still image selection in Card Mix (Card Mix standby state) is not backed up when the power is turned off.

Item Power switch OFF, VCR

Camera mode, Card/Camera mode (DM-MV650i E, DM-MV630i E)

Program AE mode type Backup

Manual focus ON/OFF Backup

AE shift setting mode ON/OFF Backup

DE, DF ON/OFF Reset (set to OFF)

Headphone volume *CAM Backup

Self timer ON/OFF Backup (set to OFF)

On-screen ON/OFF Backup

Zero Set Memory counter value *CAM Backup

Camera, Card/Camera (DM-MV650i E, DM-MV630i E) menu item settings

Digital Effects selection Backup *Independent

Fader *CAM Backup *Independent

Effects Backup *Independent

Multi-screen (speed) Backup *Independent

Multi-screen (number of screens) Backup *Independent

Mix key selection in Card MixBackup

*CAM (DM-MV650i E, DM-MV630i E only)

Mix level in Card MixBackup

*CAM (DM-MV650i E, DM-MV630i E only)

Shutter speed setting Backup

Digital zoom setting Backup *Independent

Image stabilizer ON/OFF Backup

16:9 ON/OFF Backup

White balance setting Backup

Remote control code setting Backup

Recording mode setting *CAM Backup

Confirmation beep ON/OFF Backup

Wind screen ON/OFF Backup

Audio mode setting *CAM Backup

AV/headphone selection Backup

LCD brightness adjustment Backup

Mirror shooting setting Backup

On-screen ON/OFF Backup

Time and Date display Backup

Area/daylight saving time setting Backup

Time and Date setting Backup

Image quality *CD (DM-MV650i E, DM-MV630i E) Backup

Number reset *CD (DM-MV650i E, DM-MV630i E) Backup

Page 72: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-68

6-3-2 Switching the Power Switch to a Different Position

* Independent : Independent backup for Card Recording mode, Camera mode, and VCR mode

Item Power switch OFF

VCR mode

Headphone volume Backup

Speaker volume Backup

On-screen ON/OFF Reset (set to OFF)

Zero Set Memory counter value Backup

Data code display ON/OFF Backup

Audio 12-bit output selection Reset (set to "Stereo 1")

Mix balance setting Backup

Photo Search/Date Search for search selection Reset (changes to "Photo Search")

VCR menu item settings

D. Effects selection Backup *Independent

Fader *CAM Backup *Independent

Effects Backup *Independent

Multi-screen (speed) Backup *Independent

Multi-screen (number of screens) Backup *Independent

Remote control code setting Backup

Recording mode setting Backup

Data code setting Backup

Time and date selection setting Backup

LCD brightness adjustment Backup

Text display during playback ON/OFF Backup

Date Auto display ON/OFF Backup

Bilingual setting Reset (set to "Main + Sub")

Audio dubbing input setting Backup

Wind screen ON/OFF Backup

LINE IN audio mode setting Backup

AV/headphone selection Reset (set to “AV”)

Confirmation beep ON/OFF Backup

Image quality (DM-MV650i E, DM-MV630i E only) Backup

Number reset (DM-MV650i E, DM-MV630i E only) Backup

Card Playback mode (DM-MV650i E, DM-MV630i E only)

On screen ON/OFF Reset (set to OFF)

Data code display ON/OFF Reset (set to OFF)

Card Playback mode menu item selection (DM-MV650i E, DM-MV630i E only)

Remote control code setting Backup

Recording mode setting Backup

Data code setting Backup

Time and Date setting Backup

LCD brightness adjustment Backup

Text display during playback ON/OFF Backup

Date Auto display ON/OFF Backup

Confirmation beep Backup

Page 73: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-69

6-3-3 Switching Camera Modes/Switching Program AE Modes

The following table presents the backup state performed for various data when the / switch is switched from (Program

AE) to (Full Auto), or when the / switch is set to and the mode is switched to a different Program AE mode.

* CAM : Camera mode only *CD : Card Recording mode only (DM-MV650i E, DM-MV630i E only)* Independent : Independent backup for Card Recording mode, Camera mode, and VCR mode*1 : When is set again, “Auto” is set.*2 : When is set again, the state preceding the switch to “ ” (Full Auto) is restored.

• The card recording still image selection in Card Mix (Card Mix standby state) is not backed up, even if there is aswitch between Normal and Progressive.

• The backup operations at LANC power-OFF and the recording pause 5-minute timer power-OFF are the same aswhen the power switch is turned OFF.

Item Switched to (Full Auto) Switched to Program AE mode

Camera mode, Card/Camera mode (DM-MV650i E, DM-MV630i E only)

Program AE mode type *1 ----

Auto focus ON/OFF Reset (set to “ON”) Backup

AE shift setting mode ON/OFF Reset (set to “OFF”) *2 Reset (set to OFF)

DE, DF ON/OFF Reset (set to “OFF”) Backup

Headphone volume Backup Backup

Self timer ON/OFF Backup Backup

On screen ON/OFF Backup Backup

Zero Set Memory counter value *CAM Backup Backup

Camera/Card mode (DM-MV650i E, DM-MV630i E) menu item settings

D. Effects selection Backup *Independent Backup *Independent

Fader *CAM Backup *Independent Backup *Independent

Effects Backup *Independent Backup *Independent

Multi-screen (speed) Backup *Independent Backup *Independent

Multi-screen (number of screens) Backup *Independent Backup *Independent

Mix selection in Card MixBackup Backup

*CAM (DM-MV650i E, 630i E only)

Mix level in Card MixBackup Backup

*CAM (DM-MV650i E, 630i E only)

Card recording image selection in Card MixReset Backup

(Card Mix standby state) (DM-MV650i E, 630i E only)

Shutter speed Reset (set to “Auto”) Reset (set to “Auto”)

Digital zoom ON/OFF Backup Backup

Image stabilizer Reset (set to “ON”) Backup

16:9 *CAM set to “OFF” *2 Backup

White balance Reset (set to “Auto”) Backup

Remote control code setting Backup Backup

Recording mode setting *CAM Backup Backup

Confirmation beep Backup Backup

Wind screen Backup Backup

AV/headphone selection Backup Backup

Audio mode *CAM Backup Backup

LCD brightness adjustment Backup Backup

Mirror shooting setting Backup Backup

On screen ON/OFF Backup Backup

Time and Date display Backup Backup

Area/daylight saving time Backup Backup

Time and Date setting Backup Backup

Image quality *CD (DM-MV650i E, 630i E only) Backup Backup

Number reset *CD (DM-MV650i E, 630i E only) Backup Backup

Page 74: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-70

7. Other Features

7-1 Green Mode

Default Settings in Green Mode

• Focus ------------------------- AUTO• Exposure -------------------- AUTO• White balance --------------- AUTO• DE, DF ---------------------- OFF• Image stabilizer ------------- ON• Shutter ----------------------- AUTO• 16:9 -------------------------- OFF

Other settings are the same as before even when the mode is changed to Green mode.

Keys that do not work in the Full Auto mode

• Focus (Auto/Manual) button (forced Auto)• Exposure (AE/AE Shift) button (forced Auto)• Multi switch• Digital effects (ON/OFF) button (forced OFF)

Relationship between Program AE mode (in Tape Recording) and Various Shooting Functions

* : DM-MV650i E, DM-MV630i E only Super Night mode is limited to the DM-MV650i E.

7-2 On Screen

• Turn ON/OFF of the On-screen function is performed through the infrared remote controller or from the menu.• The default setting is ON in Camera mode, and OFF in VCR mode.

Program AE Mode

Item

Recording medium

Autofocus ON/OFF Forced ON

Shutter speed setting × × × × × × × × ×

AE Shift × × × × × ×

Image stabilizer ON/OFF Forced ON ×

White balance setting Forced Auto

Wind screen ON/OFF

Digital zoom ON/OFF Forced OFF Forced OFF Forced OFF

16:9 ON/OFF Forced OFF

Digital fader ON/OFF × ×

Digital effects ON/OFF ×

Multi-screen × × ×

Photo shooting (recorded to tape) ×

Progressive photo shooting × × ×

Card mix * × × × ×

Page 75: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-71

7-3 Headphones and Speaker

• In Camera mode and Camera/Card mode, the speaker is OFF.• The speakers are on during normal card playback in the VCR mode. The Multi switch is used to adjust the volume.• Headphone volume can only be controlled when headphones are selected in the menu. The volume is controlled using the Multi

switch.• The speaker is OFF when headphones are selected in the menu.

7-4 Battery Indicator, Low-Power Warning, and Low-Power Shutoff

Battery Indicator

• When a battery is used, the battery indicator is displayed at one of five levels (100%, 75%, 50%, 25%, 0% (approximate)). Theselevels indicate the amount of power remaining before the low-power warning indicator appears. The battery indicator is resetwhen the power is turned off. Thus if the voltage is restored while the power is off, the battery indicator level may increase whenthe power is turned back on. However, if the low-power warning appears, it will still be displayed even if the voltage is restoredwhen the power is turned on and off.

• When an AC adapter is used, the battery indicator is not displayed. However, the low-power warning is displayed if the voltagedrops below the low-power warning level due to an abnormality. When the voltage is restored above the low-power warninglevel, the low-power warning disappears.

• The low-power warning is displayed when the battery terminal voltage falls to approx. 6.3 V or less (for this product).

7-5 System Data Displays

* The time code display reads “-.- -:- -:- -” when no tape is inserted or when the camcorder is at an unrecorded tape position.* CGMS : If the data is copy-protected, it is not output to LINE OUT or the CVF (panel).

7-6 Data Code Display

Data codes can be used to turn the display ON/OFF independently (i.e., regardless of the ON/OFF status of other On Screencharacter displays).

7-7 MP Tape Support

LP recording onto MP tape is not possible. When a tape is loaded with LP selected on the menu, the setting is automaticallyswitched to SP. During playback, the tape is played in LP if it was recorded in LP.

Camera Mode VCR Mode

Camera Screen REC Search DIF Input Blue Background PB(including Superb Playback)

Data code (timestamp) × × × - - - × - - -

Data code (camera data) × × × F - - - etc. × F - - - etc.

Time code

Main unitAudio mode (12/16 bit) × ×

4-second display DIF sideWide/Normal × ×

Setting display DIF sideCGMS (warning) × ×

DIF sideSP/LP

Setting display Setting display Setting display

Page 76: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-72

7-8 Confirmation Beep

In the following cases, beep melodically.

REC PAUSE (*) includes REC PAUSE for audio dubbing and AV Insert.* PIP: 4 kHz, BIP: 2 kHz, BOOP: 1kHz* The startup shutter, start/stop, and self-timer setting can be changed from the My Camera setting screen.

Mode Sound

Power ON PIP

When tape with erase protection is loaded (Camera mode) BEEP BEEP BEEP

When EJECT cover is opened all the way (even when power is OFF) PIP PIP

When recording is started (Camera mode) PIP

When recording is paused (Camera mode) PIP PIP

When Photo button is half-pressed PIP PIP

When photo recording starts PIP

When a condensation or a mechanical error occurs, or five seconds BEEP (5 times)

before the REC PAUSE(*) five-minute timer ends

When the SET button is pressed on an unavailable menu item BOOP

10, 15, and 20 seconds before the REC PAUSE (*) five-minute timer ends BIP BIP BIP

Self timer (synchronized with tally blinking) PIP PIP (8 times at every second)

PIP (8 times at 0.25 second)

Page 77: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-73

7-9 Using Analog Line Recording (Not available on PAL models) andDV Recording (Not Available on PAL models)

(1) Move the power switch to the VCR position and the Tape/Card switch to the TAPE. If a cassette has been inserted it will be stopped.The terminal (DV, S, AV) are set to output. In addition, the headphone terminal (if that setting is selected from the menu), whichalso serves as the AV jack, and the speaker are set to output (the headphone status takes priority).

(2) Connect a cable from a recording source to the S-VIDEO terminal (video signal) and AV terminal (audio signal), or to the AVterminals (video and audio signals), or to the DV terminal. Power on the recording source.

* If recording is paused while input is being received from terminals other than the DV terminal, the AV jack isautomatically set as the AV input terminal.

If more than one of the above terminals is connected at the same time, the active terminal is selected automatically according to thefollowing order of priority.

Order of priority : DV terminal > S terminal > AV terminal

Note that when the playback screen is displayed (including Superb Playback), the playback screen takes priority.(3) Press [REC STANDBY] on the remote control.

Recording is paused. If analog line input is being used, the S terminal and AV terminal are switched to input at this time.(4) To start recording, press [ / ] on the remote control.

This starts recording of video, audio etc. through the terminal selected in step (2)(Press [ / ] to toggle between recording and pausing.)

(5) Press [] to stop recording.Recording is stopped.

* If DV input disappears during DV recording, then recording is stopped.* If a recording source is input to the DV terminal during analog line recording, recording is continued without change. When

recording is paused, the input is switched to DV input.* CGMS (Copy Generation Management System; copy protection) input signal

• Only input signals (CGMS = 00) that are not copy-protected can be recorded.• If a copy-prohibited input signal (CGMS = 11) or single-copy-allowed input signal (CGMS = 10) is detected during

recording or when recording is paused, then recording is paused.• Blue background is output to the LCD panel and CVF. The speaker and headphone output is muted.• Both audio and video CGMSD (Copy Generation Management System for Digital) signals are detected during DV input.

The signal with the stronger copy protection setting is used.

The Following Table Summarizes the Input and Output Statuses in Different Modes.

* : No signal if there is no LINE input.

DV input signal present No DV input signal

LCD, CVF DV terminal S, AV terminals LCD, CVF DV terminal S, AV terminals

Playback Playback screen OUT OUT Playback screen OUT OUT

(including Superb Playback)

No tape, STOP, FF, REW DV input screen IN OUT Blue background OUT OUT

REC PAUSE, REC DV input screen IN OUT Line input screen* IN IN

Page 78: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-74

7-10 Support for Analog Signal I/O Copyright Protection Signals

(1) Detection of copyright protection signals added to input signals• Detected copyright protection signals: Pseudo-synch pulses and CGMSA (Copy Generation Management System for analog)

signals• Signal detection time: 20 seconds maximum

(2) Copyright protection signals added to output signals• Macrovision (pseudo-synch pulses): Not added• CGMSA signals: Not added

7-11 Video ID1 Detection/Output Support

(1) S1 signal outputWhen a Full mode (squeezed) video signal, consisting of 16:9 video compressed to 4:3, is output from the S terminal, an S 1 -compatible wide monitor will detect an identification signal for automatically restoring the 16:9 video (e.g., during playback of atape recorded in Camera 16:9 mode or a tape containing system data related to the aspect ratio).• NTSC → 16:9 Full mode + 4:3 Letter Box mode identification signal output• PAL → 16:9 Full mode identification signal output

(2) Video ID1 output• When a Full mode (squeezed) video signal, consisting of 16:9 video compressed to 4:3, is output from the composite video

terminal or S terminal, a video ID 1 /-compatible wide monitor will detect an identification signal for automatically restoring the16:9 video (e.g., during playback of a tape recorded in Camera 16:9 mode or a tape containing system data related to the aspectratio).

(3) Detection of S1 signal or video ID1 during line input (ID1 is for NTSC models only)• A video ID 1 /S 1 signal multiplexed onto a video signal input from the composite video terminal or S terminal is detected, and

system data relating to aspect ratio information is recorded.(4) Detection of WSS (Wide Screen Signaling) signal during line input (iPAL model only)

Page 79: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-75

7-12 Audio Dubbing

7-12-1 Tapes to which Audio Dubbing can be Added

Audio dubbing can only be added to tapes with 1 2-bit/SP recording (other than 4-channel simultaneous recording). The camcorderswitches to Stop mode if audio dubbing is attempted on other tapes.The camcorder switches to Stop mode (a warning is displayed) if LP mode is detected, or if any of the following are detected: 1 6-bit mode, 4-channel simultaneous recording, no recording, SDL recording.

7-12-2 Selecting an Audio Dubbing Signal Input Source

Select an audio dubbing input source on the VCR menu. (There is no menu on PAL models. The microphone is the only audiodubbing input source for these models.)There are two audio dubbing options: “Line (AV terminal)” and “Microphone”. If Microphone is selected and an external micro-phone is connected, then the external microphone is used as input. If no external microphone is connected, then the built-inmicrophone is used as input.The settings for line video output are as follows.

(1) When AV terminal input is used: The S terminal and AV terminal are set to Input mode. The speaker output can be monitored.(2) When external microphone input is used : The S terminal and AV terminal are set to Output mode. The speaker is off and line

monitoring is possible.(3) When built-in microphone input is used : The S terminal and AV terminal are set to Output

The speaker is off and line mounitoring is possible.

7-12-3 Audio Dubbing Procedure

(1) In VCR mode, play and pause the tape at the position where you want to add audio dubbing. Next, press the [Audio dubbing] buttonon the remote control.The camcorder switches to Audio Dubbing mode (Audio Dubbing pause), and (Audio Dubbing pause) is displayed on the LCDpanel (CVF).

(2) Push the Pause [ ] button and input the audio through the microphone, etc.This starts the audio dubbing process.

(3) When you want to stop, press the Stop [] button.Audio Dubbing mode ends and the Audio Dubbing display disappears. The camcorder is stopped.• You can press the Pause [ ] button instead of the Stop [] button to return to the condition in step (1) (Audio Dubbing pause)

without exiting Audio Dubbing mode.• Another way to exit Audio Dubbing mode is to press the [Audio Dubbing] button during Audio Dubbing pause.• If the [Zero Set Memory] button on the remote control is pressed in advance at the tape position where you want audio dubbing

to end, then after step (2), the camcorder will automatically stop at the set position and audio dubbing will end.

7-12-4 CGMS

• A CGMSA signal added to an analog-input video signal cannot be detected while a tape is being played. During audio dubbing,the yellow video terminal must be disconnected.

• Do not activate Audio Dubbing mode at copy-protected locations on a copy-protected tape. When the tape moves from acopyable area to a copy-protected area, the camcorder stops.

Page 80: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-76

7-13 AV Insert (Not Available on PAL models)

In AV Insert mode, an ITI (Insert and Track Information) area is kept and audio, video, and sub-codes are overwritten.

7-13-1 Tapes Allowing AV Insert

Only tapes with SP recording can be used with AV Insert mode. If an attempt is made to enter AV Insert mode with any other typeof tape, the camcorder switches to Stop mode. The camcorder stops (and displays a warning) if LP mode is detected, or if norecording SDL is detected.

7-13-2 AV Insert Signal Input Source Selection

The input source is selected automatically according to the following order of priority:

DV terminal (ACK detected) > AV terminal detected > No connection

The settings for line video output are as follows.(1) When DV terminal input is used : The S terminal and AV terminal are set to Output mode. The speaker output can be monitored.(2) When AV terminal input is used : The S terminal and AV terminal are set to Input mode. The speaker output can be monitored.(3) When there is no connection : The S terminal and AV terminal are OFF. The speaker output is muted.

7-13-3 AV Insert Procedure

(1) In VCR mode, play and pause the tape at the position where you want to insert AV. Next, press the [AV Insert] button on the remotecontrol. The camcorder switches to AV Insert mode (AV Insert pause), and “ ” (AV Insert pause) is displayed on the LCD panel(CVF).

(2) Push the Pause [ ] button and input the video and audio.This starts the AV insertion process. (AV Insert) is displayed on the LCD panel (CVF).

(3) When you want to stop, press the Stop [] button.AV Insert mode ends and the AV Insert display disappears. The camcorder is stopped.• You can press the Pause [ ] button instead of the Stop [] button to return to the condition in step (1) (AV Insert pause) without

exiting AV Insert mode.• Another way to exit AV Insert mode is to press the [AV Insert] button on the remote control during AV Insert pause.• If the [Zero Set Memory] button on the remote control is pressed in advance at the tape position where you want AV insertion to

end, then after step (2), the camcorder will automatically stop at the set position and AV insertion will end.

7-13-4 CGMS

• AV insertion for both DV input and analog input is only possible when there is no copy protection (CGMS = 00).• If a value other than “00” is detected for CGMS, then the camcorder changes to Stop mode.

Page 81: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 1. GENERAL DESCRIPTION OF PRODUCT

1-77

7-14 Analog/Digital Signal Conversion

This function can be used as an A/D conversion function for inputting an analog AV signal from an analog device to a PC.

7-14-1 A/D Signal Conversion Procedure

(1) Connect the output terminal of the analog device with the analog terminal of the camcorder using STV-250N (or using S-1 50 ifnecessary). Also connect the DV terminal of the camcorder with the DV terminal on the PC using CV-250F or CV-1 50F.

(2) Move the camcorder's power switch to [VCR] and move the Tape/Card switch to “Tape”, setting the operating mode to Stop modewithout inserting a tape.

(3) Select this function (A/D signal conversion) from the VCR setting item on the menu. Specifically, set “AV input → DV output” to“ON”.

(4) Open the motion video acquisition software program on the PC and output the analog AV signal from the analog device.The analog AV signal from the analog device is converted by the camcorder to a digital signal (DV signal). The PC can then acquirethe video and audio from the analog device, making it possible to record motion video and still images as needed.

7-14-2 CGMS

• A/D signal conversion for both DV input and analog input is only possible when there is no copy protection (CGMS = 00).• If a value other than “00” is detected for CGMS, then the A/D signal conversion function is closed, the LCD panel/CVF changes

to blue background, the audio output is muted, and the following warning message is displayed: “COPYRIGHT PROTECTEDDUBBING RESTRICTED”.

7-15 Multi Switch

VCR operations and various settings can be performed in this mode.

When the Switch is Turned

When Setting Switch is Pushed

Multi-switch Mode Operated Function When switch is turned upward

During menu selection Item selection The cursor moves up.

Menu During LCD brightness adjustment Brightness adjustment The LCD screen grows brighter.

During card mix level adjustment Mix level adjustment The mix level range becomes smaller.

(DM-MV650i E, DM-MV630i E)

During AE shift AE level correction The iris value is increased.

During manual focus Focus adjustment The focus moves closer.

During VCR mode Speaker/headphone volume adjustment The volume increases.

During playback zoom Movement of display frame Frame moves up (to the right).

Multi switch mode Operated function When Setting switch is pushed

Shooting pause Open/close Program AE menu Program AE mode selection.

(sets selected settings)

In Digital Effects mode Digital Effects mode selection switch Digital Effects mode is selected.

When menu is displayed Menu item setting switch The item is selected.

During playback zoom Toggles direction of frame movement The direction of frame movement is selected.

(left-right/up-down)

Page 82: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 2. TECHNICAL DESCRIPTION

CONTENTS

1. P.C.B. Functions ------------------------------------------------------------------------------------------------------------------------------ 2-12. Power Supply Circuit ------------------------------------------------------------------------------------------------------------------------ 2-3

2-1 Startup of Power Supply ------------------------------------------------------------------------------------------------------------- 2-32-2 Power Fuses ---------------------------------------------------------------------------------------------------------------------------- 2-52-3 Power Supply Circuits ---------------------------------------------------------------------------------------------------------------- 2-6

3. Built-in Charger Circuit ---------------------------------------------------------------------------------------------------------------------- 2-73-1 Outline ---------------------------------------------------------------------------------------------------------------------------------- 2-73-2 Operation at Charging ---------------------------------------------------------------------------------------------------------------- 2-8

3-2-1 Conditions To Start Charging --------------------------------------------------------------------------------------------- 2-83-2-2 Progress of Charging ------------------------------------------------------------------------------------------------------ 2-9

4. Signal Processing Circuit -------------------------------------------------------------------------------------------------------------------2-104-1 Outline of Signal Processing Circuit ----------------------------------------------------------------------------------------------2-104-2 Camera/Card Signal Processing ---------------------------------------------------------------------------------------------------- 2-11

4-2-1 Camera Motion Picture Recording ------------------------------------------------------------------------------------- 2-114-2-2 Card Still Picture Recording --------------------------------------------------------------------------------------------- 2-114-2-3 Card Motion Picture Recording -----------------------------------------------------------------------------------------2-12

4-3 Recorder Signal Processing ---------------------------------------------------------------------------------------------------------2-134-4 Audio Signal Flow -------------------------------------------------------------------------------------------------------------------2-14

5. System Control, Servo -----------------------------------------------------------------------------------------------------------------------2-155-1 Outline of System Control, Servo --------------------------------------------------------------------------------------------------2-155-2 Major Functions of Each Microcomputer ----------------------------------------------------------------------------------------2-165-3 Servo Control -------------------------------------------------------------------------------------------------------------------------2-175-4 Personal Computer Connection Mode (USB) ------------------------------------------------------------------------------------2-185-5 Error Detection -----------------------------------------------------------------------------------------------------------------------2-19

5-5-1 Error Detecting Conditions ----------------------------------------------------------------------------------------------2-195-5-2 Processing after Error Detection ----------------------------------------------------------------------------------------2-19

Page 83: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-1

1. P.C.B. Functions(1) MAIN P.C.B.

System-Control Section• IC100 MODE MI-COM System control• IC200 BACK UP MODE MI-COM resetting• IC103 RESET Detects a DC JACK voltage to the MODE MI-COM.

Camera/Card Section• IC1101 SDRAM Memory for MACS (64M)• IC1102 MACS Camera digital signal processing, and card image processing

PM Section• IC1802 OPE AMP Operational amplifier for charge circuit• IC3201 DC/DC CONVERTER CONTROL Power PWM regulator controller• IC3202 2.7V REGULATOR 2.7V regulator• IC3203 4.7V REGULATOR 4.7V regulator• IC3204 2.5V REGULATOR 2.5V regulator

Video Section• IC2000 VRP2 Record playback head amplifier• IC2100 VIF2 Analog video input/output signal processing• IC2300 FLASH Memory for FR MI-COM• IC2301 VIC3 Digital VCR signal processing LSI, IEEE1394 interface,

FR MI-COM, and USB interface• IC2302 SDRAM Memory for VIC3 (64M)

MO Driver Section• IC300 OPE AMP Operational amplifier for reel sensor• IC301 MOTOR DRIVE Drum, capstan, and loading motor driver

Audio Section• IC801 AUDIO INTERFACE Analog input/output signal processing• IC802 SP DRIVER Speaker amplifier• IC803 4V REGULATOR 4V regulator (for speaker amplifier)

(2) CAC P.C.B.Camera Section

• IC1001 V-DRIVER CCD V driver• IC1002 TG/CDS/AGC/AD CCD, TG, CCD output signal sampling, AGC, and A/D converter• IC1202 IRIS DRIVE IRIS driver, and gyro output amp• IC1701 MOTOR DRIVER Zoom, focus motor driver

CVF Section• IC1501 EVF DRIVER EVF LCD (CVF) drive• IC1502 EEPROM EEPROM for CVF data, MODE MI-COM

(3) CCD P.C.B.• IC1070 CCD CCD image sensor

(4) LCD P.C.B.• IC901 EEPROM EEPROM for LCD data• IC902 SERI/PARA CONVERTER LCD power switchover• IC903 LCD DRIVE LCD signal processing and drive• IC4201 DC/DC CONVERTER CONTROL Backlight drive

Page 84: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-2

(5) CVF P.C.B.Signal transfer from CAC P.C.B. to CVF-LCD, back-light LED turn-on.

(6) JACK P.C.B.AV, MIC, S JACK, USB interface, Remoto control signal receiver sensor, white LED.

• IC1601 P SENSOR GYRO Pitch-direction angular speed detection• IC1602 Y SENSOR GYRO Yaw-direction angular speed detection

Page 85: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-3

2. Power Supply Circuit

<Outline>

In this product, a novel type of power supply system including a compact adapter (CA-570) is adopted for enhancement of costperformance and power savings.In comparison with the conventional products, this machine provides the following advantageous features:• When the DC jack is disconnected from the battery with power turned ON, poser goes OFF once.• The internal battery is charged only when the MAIN switch is at the P OFF position.• When the DC jack not connected with power source (not supplied with power) is inserted into the main unit, power is not turned

on even if the battery is mounted. “A changeover of main power to the battery is not made since an event of DC jack mechanismdetection takes precedence.”

2-1 Startup of Power Supply

Fig. 2-1

3 13

5 7

4

76

77

66

6714

4

12

11

97

18

14

62

10

52

73

41

71

252

DET

RESET

SW

E3VE3 DET

VCC

CN4001LITHIUM BATTERY

VTRPOWER SW

VTR ON

PM SECTION

DMC-IIICASSETTEIN SW POWER SWJACK

EJ SW

CAMERAPOWER SW

EJECT SW

CAS IN

RESET

VTR ON

UNREG DET

DC J DET

LI DET

SERIALDATA

IC2301FR

MI-COM.(VIC3)

IC103RESET

IC102BACK UP

IC100MODE

MI-COM.

CN2101 CN101CN100

DVDD 3V

3VREG.

2.6VDET.

1221

CN3202

CN3201

5

6

2

3

DC+

DC J SW

BATT+

31

12

CN303MAIN P.C.B.

Card P.C.B.

109

Page 86: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-4

• Backup Lithium BatteryLI3V power from the lithium battery is input to pin 3 of the IC102, and it is output from pin 12 as power to the MODE microcom-puter. Thus, the MODE microcomputer performs data backup and clock operation when main power supply is not connected.When the voltage of the lithium battery decreases below 2.6 V (or when the lithium battery is not loaded), the IC102 outputs the “L”signal form pin 2. Upon receipt of this signal at the time of power-on, the MODE microcomputer sends it to the FR microcomputer,which then issue a lithium battery low-level warning indication.

• Main Power SupplyMain power (DC-JACK/BATTERY) is supplied to pin 13 of IC102. Through the internal regulator in IC102, the main power thussupplied is converted to 3V power, which is output as E3V from pin 14 of IC102. Furthermore, through the internal switch, themain power is converted to LI3V, which is output from pin 12 of IC102 as a power voltage for driving the MODE MI-COM.Supplied with the main power, IC102 outputs the “L” signal from its pin 4. When the MODE MI-COM receives the “L” signal andthe two signals output from pin 4 of IC103, it recognizes that the power supply is loaded. Then the MODE MI-COM performsinitialization to set up a standby state. In this state, the MODE MI-COM carries out detection of start-related switch signals. Upondetection of these switch signals, the MODE MI-COM delivers the VTR ON(H) signal from its pins 52. When the VTR ON(H)signalis output, each circuit power is made active.When each circuit power is made active, 3V power is input to pins 5/7 of IC102. 3V power is output as the power for the MODEMI-COM from pin 12 of IC102 to save its power consumption.

Page 87: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-5

2-2 Power Fuses

The power supply from the battery DC JACK is supplied to six fuses on the MAIN P.C.B., through which the following six powervoltage are delivered.

(1) UNREG 1 : FU3201• 3V power source (LCD3V, A 3V, HA 3V, DVDD 3V, IRIS 3V, CAM 3V)• 2.7V power source (SDRAM 2.7V, AVDD 2.7V, DIF 2.7V)• 2.5V power source (DVDD 2.5V)• 1.4V power source (DVDD 1.4V, MACS 1.4V, AVDD 1.4V)• LCD drive power source (-8V, 8.5V, 15V)• CCD drive power source (-7V, +15V)

(2) P5/VTR UNREG : FU3202• 4.7V power source (AA 4.7V, VIF 4.7V, HA 4.7V)• 5V power source (POW 5V, LCD 5V)• VCR UNREG

(3) MECHA UNREG : FU3203• DRUM /CAPSTAN

(4) DC/DC UNREG : FU3204• DC/DC CONVERTER

(5) SHOE UNREG : FU3205• Accessory shoe power source

(6) MI-COM UNREG : FU1801• MI-COM UNREG (BATTERY)

Fig. 2-2

2 DC +

5,6 BATT +

* DM-MV650i E Only

MAIN P.C.B.FU3201CN3201

CN3202

FU3204

UNREG 1

DC/DC UNREG

FU3205SHOE UNREG

FU3203MECHA UNREG

FU1801

MODEMI-COM

MICOM UNREG

FU3202P5 + VTR UNREG

Page 88: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-6

2-3 Power Supply Circuits

Figure 2-3 shows the power supply circuits.The ON/OFF condition of each power supply voltage is controlled by the VTR ON signals output from the MODE MI-COM.

Fig. 2-3

IC3201DC/DC

CONVERTERCONTROL DVDD 3V

IRIS 3V

CAM 3V

LCD 3V

LCD -10V

LCD 8.5VREG.

REG.

62

11

PWM

28

30

56

40

PWM

LCD 15V

VTR ON

SDRAM 2.7V

DIF 2.7V

AVDD 2.7V

A 3V

HA 3V

Q3205

MAIN P.C.B.

31

60

21

Q3207REG.

LPF

P 5V

HA 4.7V

LPF

LPF

LPF

LPF

LCD 5V

LPF VIF 4.7V

LPFREG.

REG.

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF MACS 1.4V

LPF

REG.

PWM

CH-5

UNREG

DRUM VM

AA 4.7V57

37

Q3206REG.PWM

CH-4

UNREG

CCD 15V

CCD -7V64

5

REG.PWM

CH-8

UNREG

DVDD 1.4V

AVDD 1.4V

DVDD 2.5V

50

46

Q3204

IC3203

IC3202

IC3204

REG.PWM

CH-1

CH-7

CH-3

UNREG

CAP VM61

15

Q3208REG.PWM

CH-6

UNREG

UNREG

UNREG

Page 89: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-7

3. Built-in Charger Circuit

3-1 Outline

The main circuit elements and their functions are as follows.

(1) IC100 : MODE MI-COM• Charging voltage and charging current control• Detection and display of charging progress• Error discrimination and display• Battery type discrimination and DC jack input detection

(2) IC 1802 : OPE AMP• Signal amplification for detecting charging current

(3) Q1802/Q1803 : MOS form FET• Power supply changeover switch

(4) Q1804/Q1805 : TRANSISTOR• Trickle charge switch

Fig. 2-4

CHAGE

INIT CHG1

INIT CHG2

A/D I

A/D

VDC JACK DET

DC

JAC

K D

ET

UN

RE

G D

ET

BATT AD

BA

TT INFO

AD

Q1803Q1805

Q1804

Q1802

IC1802

CN3202

5,6

3,4

2

1

BATT+

BATT-

BATT INFO AD

BATT E3 BATT E3

CN3201

DC

JACK

BATTERY

B

D

MAIN P.C.B.DCP.C.B.

3

2

1

DC J SW

DC+

DC-

8889

7173

90

41

99

87

100

IC100MODE

MI-COM.

IC103RESET

Page 90: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-8

3-2 Operation at Charging

3-2-1 Conditions To Start Charging

When the following conditions are satisfied, the MODE MI-COM (IC100) to start charging.

Conditions Detection Source of detectionMain unit power is turned OFF. MODE MI-COM pin 76/77 POWER SWBattery is installed. MODE MI-COM pin 88 Battery D terminal

(BATT INFO AD) (CN3202 pin 2)DC JACK is inserted. MODE MI-COM pin 71 DC JACK

(DC JACK DET) (CN3201 pin 3)DC JACK input voltage is 8.4±0.3V. MODE MI-COM pin 87

(BATT AD) DC JACKMODE MI-COM pin 73 (CN3201 pin 2)(UNREG DET)

Page 91: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-9

3-2-2 Progress of Charging

When the conditions described in 3-2-1 are satisfied, the MODE MI-COM starts charging according to the specifications in Fig.2-5.The charging current in quick charge can be restricted by CA-570.

Fig. 2-5

TOTAL TIMER

Quick charge 1.525A 0.075A

LED flashes once LED flashes twice

LED lights up steadilyUp to battery installed/removed

and power turned ONCharging current

When battery voltage becomes 6.5V, quick charge starts.

100mAADI detection voltage = 0.155V

Specified from D65 BP-Z: 10 min. BP-2Z: 10 min. BP-3Z: 10 min.

1.1AADI detection voltage = 1.706V

70mAADI detection voltage = 0.109V

Torque 2 timer100 min. max.Error indicated and charging OFF at timeout

Torque 1 timer110 min. max.Error indicated and charging OFF at timeout

BATT V 5.2VINIT-CHG1 ONINIT-CHG2 OFFCHG OFF

Quick charge timerError indicated and charging OFF at timeout

* An error is indicated and charging is turned OFF if the battery voltage becomes 6.4V or lower during charging other than trickles 1 and 2.* An error is indicated and charging is turned OFF if the battery voltage becomes 5V or lower during charging trickle 2.* An error is indicated and charging is turned OFF if the charging voltage is 1.8A or higher (detected voltage > 2.7V).* Charging is turned OFF if the charging current is 70mA or lower.

If the battery is not installed/removed after completion of charge, charging does not start unless the battery voltage becomes 7V or lower.

* Charging is allowed to start provided that the UNREG voltage is 8.4 0.3V before starting the charging. Otherwise, an error is indicated.* Charging can be performed provided that the power is turned OFF.* If the DC JACK is detected, the charging is turned OFF when the power is turned ON (no power supplied from the battery).

Lapsed time

BP-Z : 2HmaxBP-2Z : 4HmaxBP-3Z : 5Hmax

Total timerLED lit and charging ended at timeout

BP-Z : 6HmaxBP-2Z : 9HmaxBP-3Z : 12Hmax

Chargeended

5.2V BATT V 6.5VINIT-CHG1 ONINIT-CHG2 ONCHG OFF

BATT V 6.5VADI detection voltage

1.706VINIT-CHG1 OFFINIT-CHG2 OFFCHG ON

If the battery voltage becomes 5.2V, the trickle 2 starts.350mA max.

Trickle 150mA max.

BATT V 8.0VADI detection voltage

0.109VINIT-CHG1 OFFINIT-CHG2 OFFCHG OFF

2-flash timerLED lit and charging ended at timeout

BP-Z : 2HmaxBP-2Z : 4HmaxBP-3Z : 8Hmax

BATT V 6.5V0.155V ADI detection voltage

1.706VINIT-CHG1 OFFINIT-CHG2 OFFCHG ON

Supplementary timerLED lit and charging ended at timeout

BP-Z : 1HmaxBP-2Z : 1HmaxBP-3Z : 1Hmax

BATT V 8.0V0.109V ADI detection voltage 0.155VINIT-CHG1 OFFINIT-CHG2 OFFCHG ON

Page 92: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-10

4. Signal Processing Circuit

4-1 Outline of Signal Processing Circuit

Figure 2-6 shows the entire block diagram of the signal processing circuit and the flow of video and audio signals.

Fig. 2-6

LENS

CCD P.C.B.

CARDP.C.B.

JACK P.C.B.

MAIN P.C.B. LCDP.C.B.

CAC P.C.B.

MEMORYCARD

IC1102MACS

IC2100VIF2

IC801AIF3

IC802SP DRIVE

LCD

CVFLCD

IC1001CCD

IC2303SDRAM

IC903EVF

DRIVE

IC2000VRP2

IC1101SDRAM

IC2301VIC3

IC501EVF DRIVE

IC1002TG/CDS/AGC/AD

USB

DIF

FRMICOM

MIN AVJACK

DVTERMINAL

USBTERMINAL

MIC

SPEAKERREC/PBHEAD

Page 93: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-11

4-2 Camera/Card Signal Processing

4-2-1 Camera Motion Picture Recording

4-2-2 Card Still Picture Recording

Fig. 2-7

JPEGJPEG

Audio

SynthesisCOMP

Deformation, DrawingREND

Camera signal processing

GRAB

CDS/AGC/

AD/TGIC1002

CARD IF

proc resize nr VIC3IC2301

FRMI-COM

CCDIC1001

IC1102

36MHz 10bit18MHz

SDRAM IF

AIFIC801

32 bit

64 Mbit SDRAMIC1101

Fig. 2-8

JPEG

Audio

SDRAM IF

CARD IF

proc resize nr

VIC3IC2301

SDCARD

DMAFR

MI-COM

RAW YCC 1 YCC 2

AIFIC801

USB

CDS/AGC/

AD/TGIC1002

36MHz 10bit18MHz

CCDIC1001

IC1102

Camera signal processing

GRAB

64 Mbit SDRAMIC1101

SynthesisCOMP

Deformation, DrawingREND

32 bit

Page 94: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-12

4-2-3 Card Motion Picture Recording

<CCD> IC1001• 1/6 inches interlaced CCD• Complementary color filter• Total number of pixels Approx. 680,000

Effective number of pixels Tape : Approx. 340,000 / Card : Approx. 447,000

<CDS/AGC/AD/TG> IC1002A signal read out of the CCD is extracted. Then, after the extracted signal is subjected to AGC processing and A/D conversion, itis output as a digital signal.

<MACS> IC1102Various camera signal processing operations (EIS, AWB, etc.) and digital effect processing operation are carried out.This circuit carries out various camera signal processing operations (EIS, AWB, etc.), and digital effect processing. It also performsmultimedia-application signal processing mainly for still image recording.

• Feature engine• High-speed card interface• JPEG• Audio data compression (ADPCM)• USB 1.1 function

<SDRAM> IC1101Field memory for camera signal processing and digital effect processingImage data memory for Memory card write/read operation

Fig. 2-9

JPEG

Audio

CARD IF

proc nr

SDCARD

DMA

YCC 1 YCC 2

AIFIC801

resize

SDRAM IF

CDS/AGC/

AD/TGIC1002

36MHz 10bit18MHz

CCDIC1001

IC1102

Camera signal processing

GRAB

64 Mbit SDRAMIC1101

SynthesisCOMP

Deformation, DrawingREND

32 bit

VIC3IC2301

FRMI-COM

Page 95: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-13

4-3 Recorder Signal Processing

< VIC3 >IC2301• The VIC, MI-COM, DIF INTERFACE and USB INTERFACE circuits are integrated on a single semiconductor chip.• A/B DATA : Input in camera mode. B DATA is output and A DATA is input at playback. (MACS digital effect circuit is used

at playback.)The video data and signals input to VIC3 are subjected to digital VCR format signal processing. Audio data,subcode data and ITI data are also created at VIC3, and these signals are output to VRP2 as 41.85 Mbps data ofDV format.

• DIF : After conversion to digital data conforming to IEEE1394 standard, the data is output at DV terminal. At digitalinput, the data enters VIC3 signal processing circuit via the opposite route.

< VRP2 >IC2000Recording data of 41.85 Mbps output from VIC3 is amplified at VRP2, and is recorded on magnetic tape while undergoing headswitching of CH-1, CH-2 with a switching pulse. At playback, the head output signal is amplified and sent to VIC3.

< VIF2 >IC2100Y and C signals sent from VIC3 are output as Y, C signals for S terminal and composite video.At line input, input signals undergo level adjustment, sync signal separation and are output to VIC3.

Fig. 2-10

AV JACKS TERMINAL

CVFLCD

LCD

IC1102MACS

VIDEOINTERFACE

A DATA

B DATA

R,G,B

D/A A/D

IC2303SDRAM

REC/PBPROCESS

IC2100VIF2

ECCCOMPRESSION/DEMOD.

BUS

IC2301VIC3

VIC BLOCK DIF BLOCK

MI-COM. BLOCK

SDRAMINTERFACE

DIFINTERFACE

FR MI-COM.

USB BLOCK

USB INTERFACE

AUDIO INTERFACE

IC2000VRP2

DV TERMINAL

USBTERMINAL

AVJACK

IC801AIF3

VIDEOHEAD

Page 96: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-14

4-4 Audio Signal Flow

< AIF >IC801Carries out switching between internal and external microphones (by means of serial data from MODE MI-COM),plus ALC (AutoLevel Control), fading, and amplification of various output signals. For the beep tone issued at ejection, etc., the signal from the FRMI-COM is generated in the circuit and changed over in the AIF.The microphone amplifier, HPF, ALC, A/D, D/A, and digital I/F circuits are contained in this IC. It is also used for changeoverbetween ordinary voice sound and beep sound.

< SPEAKER DRIVER >IC802This integrated circuit is used for speaker drive operation.

Fig. 2-11

IC802SPEAKERDRIVER

FRMI-COM.

IC801AIF3

IC1102MACS

IC2301VIC3

IC2000VRP2

+

L

L

R

L

R

L+R

RMIC

HEADPHONE

AVJACK

L

R

BEEP

EXTMIC

BEEPFR MI-COM.

SPEAKER

MEM IF CARD IF

SDRAM CARD

REC/PB

HEAD

Page 97: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-15

5. System Control, Servo

5-1 Outline of System Control, Servo

Figure 2-12 shows the overall configuration of the system control & servo circuit, plus the flow of data. System control is per-formed by the FR MI-COM (IC2301) and MODE MI-COM (IC100) on MAIN P.C.B.

Fig. 2-12

DMC III

MAIN P.C.B.

LCD P.C.B.

JACKP.C.B.

CARDP.C.B.

CAC P.C.B.

HEAD

REMOTECONTROL

SIGNALRECEIVER

M

FG/PG

DRUM

CAPSTAN

LOADING

FG

M

M

IC1202IRIS

DRIVE

IC901EEPROM

IC902SERI/PARA

CONVERTER

ZOOM SW

START/STOPSW

PHOTO SW

DIAL SW

R-KEY

EJECT SW

POWER SW

IC903LCD

DRIVER

IC1501EVF

DRIVER

IC101EEPROM

IC1701MOTORDRIVER

IC3201DC/DC

CONVERTER

FRMI-COM

IC1102MACS

VIC

IC100MODE

MI-COM

IC2100VIF2

IC801AIF3

IC2000VRP2

IC2300FLASH

MEMORYCARD

IC1002CDS AGC

A/D TG

LENS

PWM D PWM C

IC301MOTORDRIVER

IC2301VIC3

CAPSTAN

DRIVER

DRUM

DRIVER

MODE SWC.DOWN SW

BOT/EOTSENS.DEW

REEL FG

MIC

LOADING

DRIVER

D-VS

C-VS

DFG/PG

CFG

Page 98: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-16

5-2 Major Functions of Each Microcomputer

(1) FR MI-COM (IC2301 : VIC3)The FR MI-COM, as the nucleus of the system, carries out control of mode transition plus mechanism control through communi-cation with MODE MI-COM. It also detects of various sensors and switches (DMCIII). Following are the major functions.

• VIC (Video) VIF2 (Video Interface) control / AIF3 (Audio Interface) controls / DIF (Digital Interface) controls• Control in accordance with IEEE1394• USB interface control• DMC III mechanism control• Card control• CCD drive control• AE, AF, AWB control• EIS (Electric Image Stabilizer) control• OSD (On Screen Display) bitmap control

* The FR microcomputer in this machine does not have a dedicated EEPROM. Since a flash ROM is used for theFR microcomputer as a substitute for the EEPROM, it is required to update the flash ROM after adjustment anddata modification regarding the FR microcomputer.

(2) MODE MI-COM (IC100)The MODE MI-COM is mainly in charge of the power-on sequence and charging control. Following are the major functions.

• Key input• LCD / EVF control• Remote control input• Power ON/OFF control• Built-in charge circuit control• MIC (Memory In Cassette) control

* In this machine, an EEPROM for the MODE microcomputer is mounted on the CAC P.C.B. instead of the MAINP.C.B.

Page 99: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-17

5-3 Servo Control

Servo control is carried out by the VIC3 (VIC and FR MI-COM). The FR MI-COM is used for servo control of motor ON/OFF androtational direction, and the VIC is used to output rotational speed and phase control signals. More specifically in terms of signalflow, the VIC detects the FG/PG and PB-RF signals from the motor, and sends the detected signal information to the FR MI-COM.Then, the FR MI-COM generates an error signal to be output to the VIC. Thereafter, the VIC outputs an error signal (PWM), whichis driven on the MAIN P.C.B. for sending a control voltage to the motor driver IC.

Fig. 2-13

VIC3

S REEL Hall SENSOR

LOADING MOTOR

DRUM MOTOR

CAPSTAN MOTOR

T REEL Hall SENSOR

LOAD ON/UNLOAD FR

DERR

LOAD+/LOAD-DMC III

U/V/W

Ucoil/Vcoil/Wcoil

CFG2C

AP

VS

CA

P V

M

DR

UM

VS

DR

UM

VM

CERR

DA CFG

DA S REEL

DA T REEL

IC1301MO DRIVE

DC/DCCONVERTER

Page 100: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-18

5-4 Personal Computer Connection Mode (USB)

In the card camera mode, an image signal produced in the camera section is sent to the memory card via the MACS. In the personalcomputer connection mode, the USB terminal and the memory card are connected through the USB controller.The FR MI-COM performs control of changeover between the card camera mode and the personal computer connection mode.

Fig. 2-14

Card camera mode of signal flow

Personal computer connection mode of signal flow

IC1001CCD

IC1002TG/CDSAGC/AD

IC1102MACS

IC2301VIC3

MEMORYCARD

USBTERMINAL

Still PictureSignal

Processing

FRMI-COM

USBCONTROLER

IC1101SDRAM

Page 101: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 2. TECHNICAL DESCRIPTION

2-19

5-5 Error Detection

If an abnormality has been occurred in any rotation drive system (drum, capstan, reel, loading), a relevant mode enters. The LCDindicates “PLEASE UNLOAD THE CASSETTE” and blinks “EJECT”.

5-5-1 Error Detecting Conditions

The following table gives error detecting conditions.

5-5-2 Processing after Error Detection

The following table gives processing after error detection.• Pop up : Error display→error eject → pop up →error clear

• Error stop : Error display→STOP position (not cleared unless EJECTED)

Cassette in Loading Duringloading

Loadingcompleted

During tape running During mode

Drum error Pop up Pop up Error stop Error stop Error stop Error stop

Capstan error Pop up ------- Error stop Error stop Error stop Error stop

Reel error ------- ------- Error stop Error stop Error stop Error stop

Loading error Pop up Pop up Error stop Error stop ------- Error stop

Kind Condition DetectionDrum error Error detecting mode Starting / steady D-FG

FG frequency when steady 900Hz

Error detecting level Starting: Beyond 80-150%.

Steady : 30% max.

Error detecting time Starting : 5sec.

Steady : 0.5sec.

Capstan error Error detecting mode Starting / steady C-FG

FG frequency when steady 1347Hz

Error detecting level Starting : 80% max.

Steady : 60Hz max.

Error detecting time Starting : 2sec.

Steady : 2sec.

Reel error Error detecting mode Starting / Normal / UNLOAD T, S-REEL FG

Error detection Normally : The C-FG count per reel FG cycle is C-FG

Starting : More than 3294

Steady : More than 2256

UNLOAD : Reel FG half cycle is 1 sec or more

(Take-up reel only for both)

Loading error Error detecting mode Mode transfer Mode SW

Error detection Mode transfer time

STANDBY-STOP : 6sec

STANDBY-POPUP : 3sec

STOP-PLAY : 3sec

Page 102: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

CONTENTS

1. List of Maintenance Tools and Supplies --------------------------------------------------------------------------------------------------- 3-11-1 List of Maintenance Tools ----------------------------------------------------------------------------------------------------------- 3-11-2 List of Supplies ------------------------------------------------------------------------------------------------------------------------ 3-1

2. Setting ------------------------------------------------------------------------------------------------------------------------------------------- 3-22-1 Setting A -------------------------------------------------------------------------------------------------------------------------------- 3-22-2 Setting B -------------------------------------------------------------------------------------------------------------------------------- 3-3

3. Service Modes --------------------------------------------------------------------------------------------------------------------------------- 3-43-1 Outline ---------------------------------------------------------------------------------------------------------------------------------- 3-43-2 How to Change Over to Service Mode --------------------------------------------------------------------------------------------- 3-43-3 How to Operate Wireless Remote Controller in Service Mode ----------------------------------------------------------------- 3-53-4 Indication in Service Mode ---------------------------------------------------------------------------------------------------------- 3-6

4. Description of Service Modes --------------------------------------------------------------------------------------------------------------- 3-74-1 Error Rate ------------------------------------------------------------------------------------------------------------------------------ 3-74-2 Mechanical Error Indication --------------------------------------------------------------------------------------------------------- 3-8

4-2-1 Mechanical Error Normal Mode ----------------------------------------------------------------------------------------- 3-84-2-2 Mechanical Error Analysis Mode ---------------------------------------------------------------------------------------- 3-9

4-3 Cleaning Mode -----------------------------------------------------------------------------------------------------------------------3-104-4 Commands Particular to Camera ---------------------------------------------------------------------------------------------------3-104-5 Checking the Lens Resetting ------------------------------------------------------------------------------------------------------- 3-114-6 Functional Check of Control Keys and Switches -------------------------------------------------------------------------------- 3-11

4-6-1 MODE MI-COM Input Port --------------------------------------------------------------------------------------------- 3-114-6-2 MODE MI-COM A/D Port ----------------------------------------------------------------------------------------------3-124-6-3 FR MI-COM Input Port --------------------------------------------------------------------------------------------------3-124-6-4 FR MI-COM A/D Port ---------------------------------------------------------------------------------------------------3-12

5. Service Hints ----------------------------------------------------------------------------------------------------------------------------------3-135-1 Arrangement of Circuit Boards -----------------------------------------------------------------------------------------------------3-135-2 Location of Main Elements ---------------------------------------------------------------------------------------------------------3-145-3 Current Consumption Check -------------------------------------------------------------------------------------------------------3-16

6. Trouble Shooting -----------------------------------------------------------------------------------------------------------------------------3-176-1 Power Supply -------------------------------------------------------------------------------------------------------------------------3-176-2 Camera Picture Faulty ---------------------------------------------------------------------------------------------------------------3-186-3 Faulty of Playback Picture ----------------------------------------------------------------------------------------------------------3-196-4 Startup Window Setting -------------------------------------------------------------------------------------------------------------3-20

7. Mechanical Error Applicability Table -----------------------------------------------------------------------------------------------------3-21

Page 103: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-1

1. List of Maintenance Tools and Supplies

1-1 List of Maintenance Tools

1-2 List of Supplies

Item Name Item Number Purpose Remarks Alignment Tape, (Color bar master/PAL) DY9-1381-00 Recorder electrical adjustment

Alignment Tape (tracking) DY9-1379-000 Running adjustment DMC IIICassette Torque Gauge for DV DY9-1346-000 Running adjustment DMC III

DV Cleaning Tape (hard) DY9-1384-000 Head cleaning DMC IIIDriver bit for tape path adjustment DY9-2053-000 Tape path adjustment DMC III

Color bar chart DY9-2002-000 Camera electrical adjustment Color Viewer 5600° K for 220V DY9-2039-220 Camera electrical adjustment (for 220V)

Color Viewer 5600° K for 240V DY9-2039-240 Camera electrical adjustment (for 240V)Lamp for Color Viewer 5600K DY9-2040-000 Replacement

Filter, CCA W12ø46mm DY9-2046-000 Camera electrical adjustment CASSETTE, SERVICE MODE DY9-1386-000 Service mode, electrical adjustment NEW

EXTENSION CONNECTOR (20pin) DY9-1387-000 Test pin extended NEW

Item Name Item Number Purpose Remarks Grease FLOIL C-1Z DY9-3039-000 Lubrication DMC IIILogenest Lambda A-74 CY9-8102-000 Lubrication Lens

Grease GE-C9 CY9-8043-000 Lubrication LensGrease FLOIL 948P DY9-3051-000 Lubrication DMC III

Hanal FL-778 DY9-3026-000 Lubrication CoverHanal KS-39M DY9-3053-000 Lubrication Cover

Dia Bond No. 1663G CY9-8129-000 Adhesive LCDSponge (W × H × T : 300mm × 200mm × 6mm) DY9-4001-000 General-purpose vibration isolating

/sound absorbing material Adhesive Tape, No.354E DY9-3032-000 General-purpose adhesive tape (W × L × T : 9mm × 50m × 0.15mm, UL type)

Adhesive Tape, No. 501F DY9-3034-000 General-purpose (W × L × T : 10mm × 50m × 0.16mm, UL type) double-side-coated adhesive tape

Sheet, Shield (W × H : 250mm × 250mm) DY9-3036-000 General-purpose shield material

Page 104: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-2

2. Setting(1) Adjustments other than DMC-III : Perform adjustments in the product state.(2) Tracking adjustment (DMC-III) and Envelope check : Perform them with the Setting A.(3) Adjustments related to DMC-III other than Tracking adjustment, tape path system check and tape path system cleaning : Perform

them with the Setting B.

2-1 Setting A

Envelope Check)

(1) Detach the Lithium Battery Cover.(2) Connect the extension connector (DY9-1387-000) to

CN2900.(3) Observe the PB-RF waveform output from the extension con-

nector

Tracking Adjustment)

(1) Remove the CASSETTE COVER referring to Fig. 3-2 (a).(2) When the posts are going to be adjusted, eject and remove the cassette once and perform the prospective adjustment as shown in

Fig. 3-2 (b).(3) Repeat the observation of the PB-RF waveform and the prospective adjustment until fluctuation of envelope is re-moved.

Note : When the tracking adjustment is going to be performed, refer to Chapter 2-8 on page 4-48 : Tape Path Adjustment.

Pin No. Signal Designation

7 GND

19 SWP

21 GND

23 PBRF

Extension connector (DY9-1387-000)

Fig. 3-1

DY9-1387-000

Fig. 3-2

(a) (b)

× 2

× 2

CASSETTE COVER ADJUSTMENT DRIVER

Page 105: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-3

2-2 Setting B

(1) Remove the FRONT COVER, REAR COVER, LEFT COVER UNIT, RIGHT COVER UNIT and JACK P.C.B. referring to“Chapter 4-1: Disassembling and Reassembling”.Note 1 : Referring to Fig.3-3, connect the required cables.Note 2 : Observe the signal in the same manner as that for setting A.Note 3 : For EJECT, select the service mode and use the wireless remote controller.

(Note : Same manner for recorder keys)

Fig. 3-3

MONITOR TV

WIRELESS CONTROLLER

CA-570

LEFT COVER UNIT

JACK P.C.B.CN2101

CN3201

REAR COVER UNIT

CN101

Page 106: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-4

3. Service Modes

3-1 Outline

(1) The service mode in this equipment uses the wireless remote controller. (To be used in remote control code 2)(2) For changeover to the service mode, a dedicated tool (CASSETTE, SERVICE MODE: DY9-1386-000) is required in addition to

the wireless remote controller.(3) Mode changeover is available between the service mode and the normal mode using the “Audio dubbing” and “SLOW” keys of the

wireless remote controller.As long as power is ON, the service mode is available even if the “CASSETTE, SERVICE MODE” is removed.

(4) In the service mode, changeover of the main unit operation mode can be handled using the keys on the main unit and the remote controlmode 1.

(5) In the service mode, safety functions such as for mechanical error detection, DEW detection and low voltage detection are canceled.(6) In the service mode, the LCD mirror function is canceled.

3-2 How to Change Over to Service Mode

(1) Cassette for changeover to service mode (DY9-1386-000)Set the ((CASSETTE, SERVICE MODE)) in the equipmentand load the data.

(2) Press the “Dubbing” key on the wireless remote controllerthat is set at Remote controller code 2.* To changeover to Remote controller code 2, press

“Remote controller setting” and “Zoom T” keys si-multaneously for 2 sec.

* The remote controller code setting on the DVC mainunit is operable both at remote controller codes 1and 2.

(3) Now the changeover to the service mode has been completedand the SERVICE MODE appears on the screen.

* Pressing the “SLOW” key performs the changeoverto the normal mode from the service mode.As long as the power supply is ON, the service modeis available by setting the “Audio dubbing” key evenif the cassette for transfer to service mode is re-moved.

Fig. 3-4

DY9-1386-000

Fig. 3-5

Page 107: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-5

3-3 How to Operate Wireless Remote Controller in Service Mode

(1) To use the wireless remote controller in the service mode, set it at Remote controller code 2.* To changeover to Remote controller code 2, press the “Remote controller setting” and “Zoom T” keys simulta-

neously for 2 sec.

Fig. 3-6

3. START/STOP

2. SLOW 1. DUBBING

5. SEARCH -

4. SERCH +

8. FF

11. PLAY

6. FRAME +

14. × 2

12. STOP

10. SERCH SELECT

9. REW

7. FRAME -

13. PAUSE

Remote ControllerCode 2 setting

No. Key Designation (in Normal Mode) Key Designation (in Service Mode) Function

1 DUBBING SERVICE MODE Change over to service mode

2 SLOW NORMAL MODE Change over to normal mode

3 START/STOP CS+ Increases CS by 1.

4 SEARCH + FUNCTION + Increases FUNCTION by 1.

5 SEARCH - FUNCTION - Decreases FUNCTION by 1.

6 FRAME + HIGH ADDRESS + Increases HIGH ADDRESS by 1.

7 FRAME - HIGH ADDRESS - Decreases HIGH ADDRESS by 1.

8 FF ADDRESS + Increases ADDRESS by 1.

9 REW ADDRESS - Decreases ADDRESS by 1.

10 SEARCH SELECT MODE SELECT Change over to RD/WR mode

11 PLAY DATA + Increases DATA by 1.

12 STOP DATA - Decreases DATA by 1.

13 PAUSE STORE Defines/w rites DATA.

14 ×2 EJECT Performs EJECT.

Page 108: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-6

3-4 Indication in Service Mode

Shown below are the indications in the service mode.

1. Indicates that the service mode is currently selected. (“SERV”)2. MODE : Indicates the MODE currently selected. (RD/WR/ST)3. Indicates for which block the command is specified. (MA,MD, CA, CD, etc.)4. CS : Indicates the Chip Select currently specified. (0~F)5. Function : Indicates the Function currently selected. (00~FF)6. ADDR : Indicates the ADDRESS currently selected. (0000~FFFF)7. DT : Indicate, in hexadecimal representation, the DATA currently being read or set. (00~FF)8. Indicates the mechanical status. (POPUP, STBY, LOAD1, LOAD2, STOP, PLAY)9. Indicates the absolute track No.10. Indicates the mechanical error. (Main power supply backup)11. Indicates mechanical error history (LITHIUM 3V battery backup)12. Indicates the version of the MAIN program in the FR MI-COM.13. Indicates the version of the MODE MI-COM.14. Indicates the version of the CAMERA program in the FR MI-COM.15. Indicates the version of the CARD program in the FR MI-COM.16. E0 : Indicates the error rate of the track that is traced in the CH0 (Low ch) head.17. E1 : Indicates the error rate of the track that is traced in the CH1 (High ch) head.18. Data Write status (00: READ mode, 04 : Write preparation, OC : Write execution)

Fig. 3-7

14

2

3

5 6

7

8 9

10

11

12

13

14

15

16 17

18

Page 109: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-7

4. Description of Service Modes

4-1 Error Rate

<Generals>

(1) A VIDEO error rate (VIDEO + AUDIO) and an AUDIO error rate can be checked.(2) Note that the error rate is worsened on occurrence of failure in tape running, deterioration of tape, decreased in head output, failure

in head amplifier, improper drum shield, etc.

<How to read a VIDEO error rate>

An average error rate on 64-track AUDIO+VIDEO sector is indi-cated in exponential representation.

Example) ‘25’ is indicated:Error rate = 2×10 -5

<How to read an AUDIO error rate>

To read error rate of AUDIO track, follow the procedures in thetable below.The number of erroneous sync block of 64-track AUDIO syncblocks is indicated in two hexadecimal digits.(FF limitation is imposed on a value exceeding 255.)

Example) ‘23’is indicated:Number of erroneous sync blocks = 35

ImportantAfter the adjustment, set the DT to the product setting . (press STORE key at 1 of STEP 1 state.)

<Change to an AUDIO error rate>

In the product specifications, the error rate on both chan-nels in self -recording LP playback is as follows :

Error rate =28H or less(Number of erroneous sync blocks = 40 or less)

Fig. 3-8

Low ch. High ch.

EO 2 5 E1

2 × 10-5

Fig. 3-9

Low ch. High ch.

(hexadecimal)

(decimal)

AO 2 3 A1

2

(2 ×16)+ 3 = 35

3

STEP PROCEDURE Microcomputer operationCS Function ADDR MODE DT

1 1) Make setting shown at right. 0 10 001D ST 00→03 Product setting 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD 03 Audio error rate indication Remarks) Selecting DT back to "0"makes a return to Audio + Video error rate.

MONITOR

Page 110: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-8

4-2 Mechanical Error Indication

<Outline>

(1) On occurrence of a mechanical error, the conditions of the error can be checked in the service mode. (Normal indication mode andanalysis mode available)

(2) In the normal indication mode of the mechanical error, two types of indications appear on the service mode initial screen: the dataindication retained only by the main battery and the error history data indication backed up by LITHIUM 3V.

(3) The data backed up by the LITHIUM 3V can be reset by the STEP-1 operation shown below.(4) For changeover to the mechanical error analysis mode, perform the STEP-2 operation shown below.

4-2-1 Mechanical Error Normal Mode

Fig. 3-10

Relevant errors are highlighted in purple.

EBDCSTLD

: TAPE END: TAPE TOP: DRUM ERROR: CAPSTAN ERROR: S-REEL ERROR: T- REEL ERROR: LOADING MTR ERROR: DEW ERROR

STEP PROCEDURE Microcomputer operationCS Function ADDR MODE DT

1 1) Make setting shown at right. 0 08 0008 ST 00 Error data held only in the POWER-ON2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD ↑ state is indicated.

2 1) Make setting shown at right. 0 10 0079 ST 012) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD ↑ Service screen change.

MONITOR

Page 111: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-9

4-2-2 Mechanical Error Analysis Mode

<How to Check>

By following the steps (1) through (4) shown below, the “Sequence” in which the error has occurred can be checked in addition to thetype of the mechanical error.(1) First of all, check the “Sequence” that matches the data (1), referring to “Address” in the mechanical error applicability table.(2) For the applicable “Sequence” in 1 above, if S reel error detection sensitivity level (CEh or 8Dh) is listed in the “Sreel” subfield of

the “Mecha Error” field, compare it with the data (2). If the data (2) is above the S reel error detection sensitivity level listed, theerror history indication should be “S reel error”.

(3) For the applicable “Sequence” in 1 above, if T reel error detection sensitivity level (CEh or 8Dh) is listed in the “Treel” subfield ofthe “Mecha Error” field, compare it with the data (3). If the data (3) is above the T reel error detection sensitivity level listed, theerror history should be “T reel error”.

(4) Unless S or T reel error is determined in step 2 or 3 above, the error history should be the error condition specified in the “Mechani-cal Error Applicablity Table” field marked with .Note : If a multiple number of items are specified, any of the applicable items should have occurred.

The DEW errors can be identified according to whether or not there is dew indication at an occurrence of anerror.

* The reference table of actual mechanical errors is given at the end of Chapter 3. (See “7: Mechanical ErrorTable” on p. 3-21.)

Fig. 3-11

1. Address of the sequence that was under execution in the event of an error. (information of the control status.)2. S reel error detection data in the event of an error.3. T reel error detection data in the event of an error.

1

32

Page 112: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-10

4-3 Cleaning Mode

When cleaning the head with hard-type cleaning tape (DY9-1384-000), set up the cleaning mode according to the procedure givenbelow.

Note : After head cleaning, be sure to restore the settings to normal.

4-4 Commands Particular to Camera

<Outline>

(1) The commands particular to camera are provided for checking the operation.(2) Make preparation according to the table below and carry out the desired commands particular to camera.(3) To restore any setting back to the original status, press the PAUSE key (STORE) for each item again in the “ST” mode.

Turning the power OFF/ON resets all the settings.

STEP PROCEDURE MONITOR Microcomputer operation CS Function ADDR MODE DT

1 1) Make setting shown at right. 0 10 0111 ST --2) Increases DT by 2. ↑ ↑ ↑ ↑ -- (Change bit-02 to 1 from 0.) (Example: 80 → 82)3) Perform STORE. (Press PAUSE key. ↑ ↑ ↑ RD -- Completion of cleaning mode setup

2 1) Change over to the normal mode and turn OFF the power supply. Resetting of cleaning mode

STEP PROCEDURE Microcomputer operation CAM SPECIAL COMMAND CS Function ADDR MODE DT

WB SET 1) Make setting shown at right. 2 08 3300 ST --2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- WB is set.

WB 1) Make setting shown at right. 2 08 3301 ST --LOCK 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- WB is locked. WB 1) Make setting shown at right. 2 08 3302 ST --TURBO 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- WB high-speed setting mode WB 1) Make setting shown at right. 2 08 3303 ST --OUTDOOR 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- WB outdoor modeWB 1) Make setting shown at right. 2 08 3304 ST --INDOOR 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- WB indoor modeIRIS 1) Make setting shown at right. 2 08 3305 ST --OPEN 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- The iris is opened forcibly. IRIS 1) Make setting shown at right. 2 08 3306 ST --CLOSE 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- The iris is closed forcibly. AGC 1) Make setting shown at right. 2 08 3307 ST --MAX 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- A value of AGC gain is maximized. AGC 1) Make setting shown at right. 2 08 3308 ST --MIN 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- A value of AGC gain is minimized.COLOR 1) Make setting shown at right. 2 08 3309 ST --BAR 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- Outputs color bar from MACS.White 1) Make setting shown at right. 2 08 330A ST --100% 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- Outputs white 100% from MACS.White 1) Make setting shown at right. 2 08 330B ST --50% 2) Execute STORE. (Press PAUSE.) ↑ ↑ ↑ RD -- Outputs white 50% from MACS.

MONITOR

Page 113: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-11

4-5 Checking the Lens Resetting

<Generals>

(1) Setting the address according to the table below allows to check whether the lens resetting is ended or not.(2) If the DATA (in hexadecimal representation) is D0 or D4, the lens has been reset.

* In case of 40 or 44, the zoom lens has not yet been reset.* In case of 80 or 84, the focus lens has not yet been reset.

4-6 Functional Check of Control Keys and Switches

<Generals>

(1) The MODE and FR MI-COM terminals can be checked in the service mode. With this function, the key-related operations and theconnections between the keys and the MI-COM terminals can be checked in the product state.

(2) Perform the check in the RD mode.

4-6-1 MODE MI-COM Input Port

STEP PROCEDURE Microcomputer operationCS Function ADDR MODE DT

1 1) Make setting shown at right. 2 00 4663 RD -- RAM data indication

MONITOR

STEP NAME DESCRIPTION CS Function ADDR DATA BIT REMARK

1 V3ToM PC PC mode communication:PC mode start 1 01 000A 4

25 Li3V Detect Detection of decrease in lithium 1 01 0007 3

battery voltage

64 PANEL Open SW LCD open detection 1 01 0002 6

65 PANEL B/T SW LCD reverse detection 1 01 0002 5

66 EJECT SW EJECT detection 1 01 0002 4

67 Cassette IN SW Cassette IN detection 1 01 0002 3

68 Photo SW Full pressing of Photo SW 1 01 0002 2

69 Half Photo SW Halfway pressing of Photo SW 1 01 0002 1

70 START/STOP Trigger SW 1 01 0002 0

71 DC J DET DC JACK detection 1 01 0002 7

75 PAE/GREEN SW PAE mode select SW 1 01 0001 3

76 VTR POWER SW VCR mode SW 1 01 0001 2

77 CAM POWER SW Camera mode SW 1 01 0001 1

78 T/C PW SW Tape/Card SW 1 01 0001 0

79 SDET S terminal detection 1 01 0000 7

Page 114: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-12

4-6-2 MODE MI-COM A/D Port

4-6-3 FR MI-COM Input Port

4-6-4 FR MI-COM A/D Port

STEP NAME DESCRIPTION CS Function ADDR REMARK

87 Batt A/D Battery voltage 1 02 0007

Battery type 00~33 34~65 66~99 9A~CD CE~FF

Batt BP-535 BP-522 BP-511 BP-508

Not /512

89 A/D V Charge voltage 1 02 0005

90 A/D I Charge current 1 02 0004

91 KEY AD0 KEY A/D0 1 02 0003

92 KEY AD1 KEY A/D1 1 02 0002

02 000000~2B:REW,2C~66:MENU

67~A6:MENU execution95 KEY AD3 KEY A/D3 1

02 000100~2B:STOP,2C~66:FF

67~A6:PLAY/PAUSE93 KEY AD2 KEY A/D2 1

Not observable

Not observable

00~2B:CARDMIX,2C~66:SELF

00~2B:DE ON/OFF,2C~66:DE SEL

AD DATA(00~FF)

Battery voltage value

88 Batt Info A/D 1 02 0006

STEP NAME DESCRIPTION CS Function ADDR DATA BIT REMARK9 EXT DET External microphone detection 0 01 0000 7

(Audio. C)

107 AV DET AV jack detect 0 01 0004 3

338 USB DET USB Detect 0 01 0009 5

268 REC PROOF Tape recording inhibited 0 01 000A 4

214 CARD PRO Card recording inhibited 0 01 000A 2

STEP NAME DESCRIPTION CS Function ADDR REMARK

339 SHOE ID1 AA SHOE ID1 0 02 000E

48 CASE IN Cassette detection 0 02 000C Cassette Cassetteinserted not inserted

216 CARD DET CARD detection 0 02 000A Card Cardinserted not inserted

137 TEMD Lens thermometer output 0 02 0008

285 ZOOMKEY Zoom key output 0 02 0007 TELE WIDEside side

217 I ENC IRIS ENC output 0 02 0006 Open

340 Y GYRO YAW side GYRO output 0 02 0005

50 P GYRO PITH side GYRO output 0 02 0004

138 DEW AD DEW detection 0 02 0003

218 MSW AD Mechanical position 0 02 0002

286 TAPE END Ending detection 0 02 0001

341 TAPE TOP Beginning detection 0 02 0000

AD DATA(00~FF)

Small diaphragm

Intermediate

Page 115: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-13

5. Service Hints

5-1 Arrangement of Circuit Boards

The printed circuit boards are arranged as shown below.

Fig.3-12

JACK P.C.B.

OPERATION KEY

EJECT P.C.B.

R-KEY P.C.B.

D SW2 P.C.B.CARD P.C.B.

LCD P.C.B.

DC P.C.B.

CVF P.C.B.

MAIN P.C.B.

CAC P.C.B.

CCD P.C.B.

Page 116: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-14

5-2 Location of Main Elements

Fig. 3-13

IC301MOTOR DRIVE

IC2000VRP2

IC2301VIC3

IC2300FLASH

IC1102MACS

IC8034V REGULATOR

IC1101SDRAM

IC801AUDIO INTERFACE

IC802SP DRIVER

IC32022.7V REGULATOR

IC32034.7V REGULATOR

IC2302SDRAM

IC3201DC/DC CONVERTER

CONTROL

IC103RESET

IC100MODE MI-COM

IC1802OPE/AMP

IC32042.5V REGULATOR

IC2100VIF2

IC102BACKUP

IC300OPE AMP

MAIN P.C.B.

FU1801

FU3205

FU3201

FU3202

FU3204

FU3203

Page 117: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-15

Fig. 3-14

CAC P.C.B.

JACK P.C.B. LCD P.C.B.

IC1701MOTOR DRIVE

IC1002TG/CDS/AGC/AD

IC1601P SENSOR GYRO

IC1502EEPROM

IC1501EVF DRIVER

IC1602Y SENSOR GYRO

IC901EEPROM

IC902SERI/PARA CONVERTER

IC903LCD DRIVE

IC4201DC/DC CONVERTER

CONTROL

IC1202IRIS DRIVE

IC1001V-DRIVER

Page 118: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-16

5-3 Current Consumption Check

The following table shows the specified value of current consumption in each status.

Measurement condition : Product status, camera auto mode(AF,IS OFF), LCD ON (Approx. 0.1A each smaller in case of CVF)Preset voltage : 7.4V

POWER SW MODE Current consumption (A)

CAMERA REC PAUSE 0.46

REC 0.51

VCR STOP 0.45

PLAY 0.54

POWER OFF 0.3 (mA)

Page 119: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-17

6. Trouble ShootingTo detect the failure part for repair, if any, use the following hints and check points.

6-1 Power Supply

<Hints>

When the power source is attached, the unit enters the standby mode in the following sequences.

Main power is connected. → UNREG is supplied to the MAIN P.C.B. → MODE microcomputer starts up. → MODE microcomputeroutputs VCR ON “H” signal. → PWM driver starts up and turns on each power supply. → Establishes communication with the FRmicrocomputer. → FR microcomputer initializes recorder mechanical chassis. → After initialized, the MODE MI-COM is brought intothe standby status with the VCR ON changed to VCR Low.

After that, the power supply is turned ON by the following procedures.

Power supply mode switch operation → After MODE MI-COM is accepted, VCR ON “H” is output. → The PWM driver is started toturn on various power supplies. → The FR MI-COM is started to control the system.

<Check Points>

1) Key InputsCheck the key inputs at Power Switch in the SERVICE mode.

2) Check of microcomputer-to-microcomputer communicationIf the microcomputer-to-microcomputer communication line is normal, the version number of each microcomputer can be indi-cated in the service mode. Otherwise, the communication line or microcomputer may be faulty.

3) Error in Mechanism (P. 3-8)If any error is occurred by mechanism trouble at initializing, the error can be detected.At this state, the power can be turned on, but the unit enters “ERROR STOP” state. In this case, check the error data in theSERVICE mode.

4) VCR ON “H”, CAM ON “H” (control signal from MODE microcomputer) OutputsCheck the output of control signal by the LANC remote controller.

5) Fuses on the POWER SUPPLY P.C.B.Check the continuity of the fuses FU3201, 3202, 3203, 3204, 3205 and 1801 on the MAIN P.C.B. In case of NG, replace the fuseand check the power consumption.

6) Replace the MAIN P.C.B. with a service part and check the operation.

Page 120: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-18

6-2 Camera Picture Faulty

<Hints>

A flow of camera picture (EE) is as below.CCD → CAC P.C.B. → MAIN P.C.B. (MACS → VIC3→VIF2) → JACK P.C.B.

<Check Points>

1) Check of lens reset (p.3-11)If no camera picture appears, check if the lens has been reset by means of the service mode. In case of NG, check the lens.

2) Check of blue back outputIf the blue back is confirmed, the signal line subsequent to VIC3 is considered to be OK.

3) Check of MACS generation signal (white 100% or color bar) (P.3-10)The white 100% or color bar signals are generated by the MACS on the MAIN P.C.B. In the service mode, if the output of the white100% or color bar signal is attained, the signal line subsequent to MACS is considered to be OK.

4) Check of CCD outputThe CCD output is sampled by IC1002 (TG/CDS/AGC/AD). Check the signal.

5) Check by command particular to camera (p.3-10)Check the operation of White balance, AGC, IRIS, etc. in the service mode.

Page 121: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-19

6-3 Faulty of Playback Picture

<Hints>

In the DV, degradation of picture quality normally appears on the screen as block noise. This is because, if an error occurs exceeding theability of the error correction circuit, the block by block information of pictures is not played back properly and thus complemented bythe previous picture information. Normally, such block noise appears on the screen when the error rate has considerably been degradeddue to the degraded tape or the lowered head output, etc. Be sure to check the playback picture quality by the error rate.

<Check Points>

1) Deterioration of Tape QualityCheck if flaws, kinks, etc. are found on a magnetic face of tape or not, and compare it with the error rate of other unit.

2) Error Rate (P. 3-7)In the service mode, check an error rate of self-recording/LP playback. The specified allowable error rate is 2 × 10-5.In case of NG, take the following procedure.

(1) Observe a playback envelope. If it is abnormal, carry out tape-path adjustment.(2) Run a cleaning tape.

Use the cleaning tape of hard type (DY9-1384-000).

[Playback time]

Hard cleaning tape (DY9-1384-000) : After replacement of the drum unit → 25 secondsFor cleaning → 25 seconds per time, Up to three times

* When using hard-type cleaning tape, select the cleaning mode on the product main unit.(Refer to 4-3 - Cleaning Mode, p. 3-10.)

(3) Check the error rate again.If the error rate is out of the specified range, clean the tape drive parts (posts, drum) using cleaning paper moistened withalcohol.* Take care not to damage the head.* Do not touch the head with bare hand.

(4) Check the error rate again.If the error rate is out of the specified range, replace the tape with a new one and check the error rate again. At this step, use atape (must be Panasonic LP tape) which has been purchased at a different time. The error rate may become worse due toinconsistent quality or aging of the tape.

(5) Check the error rate again.If the error rate is out of the specified range, replace the drum unit.

(6) Check the error rate again.If the error rate is out of the specified range, replace the mechanical unit.

Page 122: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-20

6-4 Startup Window Setting

The startup window (user setting) contains a default image* at shipment from the factory. If any other image is written over the defaultimage, it is deleted completely. So, be cautious in such cases as MAIN P.C.B. replacement.

* Default image (Image file : Contained in “7. Appendix”.)

User Setting

Page 123: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-21

7. Mechanical Error Applicability TableThe address data in the mechanical error applicability table varies depending on the version of the FR MI-COM. Check the MI-COMversion, and refer to the mechanical error applicability table relevant to the MI-COM version.

Mechanical Error Applicability Table (for MAIN program version “C204” in FR MI-COM)

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0A90E4 MechaLMOEmerg Loading error being stopped - - - - -

0A9268 ResetMechaGAP At P. ON, mechanical reset - - - - -

0A9398 ResetMechaSTOP At P. ON, mechanical reset - - - - - -

0A9476 ResetMechaPLAY At P. ON, mechanical reset - - - -

0A95AA ResetMechaPOPUP At P. ON, mechanical reset - - - - -

0A9662 ResetMechaLD1 At P. ON, mechanical reset - - - -

0A97EE ResetMechaLD2 At P. ON, mechanical reset - - - -

0A9990 ResetMecha0020 At P. ON, changeover to mechanical reset end - - - - - -

0A9E70 MechaDoneToEjectEmerg Error EJECT - - - - -

0A9F5E MechaStopEmergToEjectEmerg0010 Error EJECT - - - -

0AA07A MechaStopEmergToEjectEmerg0020 Error EJECT - - - -

0AA146 MechaStopEmergToEjectEmerg0100 Error EJECT - - - - - -

0AA1C0 MechaStopEmergToEjectEmerg0200 Error EJECT - - - - -

0AA26A MechaStopEmergToEjectEmerg0210 Error EJECT - - - - - -

0AA500 MechaDoneToEject Error EJECT - - - -

0AA94A MechaStopToEject0020 EJECT (Tape inserted) - - - 8Dh

0AAAC6 MechaStopToEject0030 EJECT (Tape inserted) - - - 8Dh

0AACD6 MechaStopToEject0040 EJECT (Tape inserted) - - - 8Dh

0AAE32 MechaStopToEject0050 EJECT (Tape inserted) - - - -

0AAF06 MechaStopToEject0060 EJECT (Tape inserted) - - - -

0AAF98 MechaStopToEjectNoCas0010 EJECT (Tape not inserted) - - - -

0AB05A MechaStopToEjectNoCas0020 EJECT (Tape not inserted) - - - - -

0AB11C MechaStopToEjectNoCas0030 EJECT (Tape not inserted) - - - - -

0AB1D4 MechaStopToEjectNoCas0040 EJECT (Tape not inserted) - - - - -

0AB29C MechaStopToEjectNoCas0050 EJECT (Tape not inserted) - - - - -

0AB71A MechaStopLoop Stop - - - - -

0AB7EA MechaEjectToStop Tape loading start - - -

0ABD36 MechaEjectToStop0020 Tape being loaded (Tape inserted) - - -

0ABF0A MechaEjectToStop0030 Tape being loaded (Tape inserted) - - - -

0AC0B6 MechaEjectToStop0200 Tape being loaded (Tape not inserted) - - - - -

0AC17E MechaEjectToStop0210 Tape being loaded (Tape not inserted) - - - - -

0AC3E4 MechaEjectToStop0100 Tape being loaded (Tape inserted) - - - - -

0AC472 MechaEjectToStop0110 Blank search start - - - -

0AC4CE MechaEjectToStop0111 Tape loading end (Tape inserted) - - - - - -

0AC516 MechaEjectToStop0120 Blank search start - - - -

0AC658 MechaEjectToStop0124 Blank search start - - - 8Dh -

0AC6E0 MechaEjectToStop0128 Blank search start - - - -

0AC83A MechaEjectToStop0130 Blank being searched - - 8Dh - -

0AC9AC MechaEjectToStop0132 Changeover to blank search end - - - - - -

0ACA16 MechaEjectToStop0133 Changeover to blank search end - 8Dh 8Dh -

0ACE8A MechaEjectToStop0136 Changeover to blank search end - - - -

0AD05E MechaEjectToStop0137 Changeover to blank search end - - 8Dh -

0AD102 MechaEjectToStop0138 Changeover to blank search end - - - 8Dh -

Page 124: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-22

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0AD172 MechaEjectToStop0139 Changeover to blank search end - - - - - -

0AD218 MechaEjectToStop0140 Changeover to blank search end - - - -

0AD3C4 MechaEjectToStop0180 Changeover to blank search end - - - - -

0AD4C2 MechaFFToStop Changeover : FF → STOP - - - 8Dh

0AD6EE MechaRewToStop Changeover : REW → STOP - 8Dh -

0ADA2E MechaRecPauseToStop Changeover : Rec Pause → STOP - CEh -

0ADD9C MechaPlayToStop Changeover : PLAY → STOP - - - 8Dh

0ADEB0 MechaStillToStop Changeover : Still → STOP - CEh -

0AE274 MechaXToEnd Start of processing at end of tape - - - -

0AE5C6 MechaXToEnd0010 Processing at end of tape - - 8Dh - -

0AE64A MechaXToEnd0020 Processing at end of tape - 8Dh - -

0AEB0C MechaXToEnd0030 Processing at end of tape - - - - -

0AEC04 MechaTopLoop Processing at beginning of tape - - - - -

0AEC6C MechaXToTop Start of processing at beginning of tape - - - - -

0AEEA0 MechaXToTop0020 Processing at beginning of tape - - - 8Dh

0AF146 MechaFFLoop FF - - - 8Dh -

0AF1F4 MechaFFSlowToFF Changeover : FF × 9.5 → × 30 - - - 8Dh -

0AF2C6 MechaFFToFFSlow Changeover : FF × 30 → × 9.5 - - - 8Dh -

0AF372 MechaHSCueToFFSlow Changeover : CUE → FF - - - 8Dh -

0AF3FE MechaStopToFFSlow Changeover : STOP → FF - -

0AF62A MechaRewLoop REW - - 8Dh - -

0AF6D8 MechaRewSlowToRew Changeover : REW × 9.5 → × 30 - - 8Dh - -

0AF7AA MechaRewToRewSlow Changeover : REW × 30 → × 9.5 - - 8Dh - -

0AF856 MechaHSRevToRewSlow Changeover : REV → REW × 9.5 - - 8Dh - -

0AF902 MechaStopToRewSlow Changeover : STOP → REW -

0AFC12 MechaRecLoop Rec - - - 8Dh -

0AFC8E MechaRecPauseToRec Rec start - - - - - -

0B000A MechaRecPauseToRec0010 Changeover to Rec start - - - - - -

0B0090 MechaRecPauseToRec0012 Changeover to Rec start - - - - - -

0B01B2 MechaRecPauseToRec0015 Changeover to Rec start - - - -

0B0338 MechaRecPauseToRec0020 Changeover to Rec start - - - - - -

0B052C MechaRecPauseLoop Rec PAUSE - - - - - -

0B058A MechaStopToRecPause Changeover : STOP → REC - -

0B0702 MechaStopToRecPause0010 Changeover : STOP → REC - - - - - -

0B0860 MechaESFStillToRecPause Changeover to Rec search FWD end - - - - - -

0B08D2 MechaESRStillToRecPause Changeover to Rec search RVS end - CEh - -

0B0B2A RecEndingSequence Changeover to Rec end - - - - - -

0B0D08 RecEndingSequence0010 Changeover to Rec end - - - -

0B0FFE RecEndingSequence0030 Changeover to Rec end - - - -

0B115E RecEndingSequence0050 Changeover to Rec end - - - - - -

0B141E MechaPlayLoop PLAY - - - 8Dh -

0B14B0 MechaStopToPlay Changeover : STOP → PLAY - -

0B15DC MechaStopTopToPlay Changeover : STOP → PLAY - -

0B1716 MechaStopTopToPlay0010 Changeover : STOP → PLAY - - - 8Dh -

0B17F0 MechaStopTopToPlay0020 Changeover : STOP → PLAY - - - 8Dh -

0B1880 MechaStillFwdToPlay Changeover : Still → PLAY - - - -

0B1B40 MechaFwd1xToPlay Capstan × 1 being rotated - - - 8Dh -

0B1D20 MechaFwd1xLoop Capstan × 1 being rotated - - - 8Dh -

Page 125: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-23

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B1DBC MechaPlayToFwd1x PLAY - - - 8Dh -

0B1E1E MechaFwd2xToFwd1x Changeover : capstan × 2 → × 1 - - - 8Dh -

0B2022 MechaStillFwdToFwd1x Changeover : Still → capstan × 1 - - - -

0B22A8 MechaStillRvsToFwd1x Changeover : Still → capstan × 1 - - - -

0B24F0 MechaStillRvsToFwd1x0010 Changeover : Still → capstan × 1 - - - - -

0B25B0 MechaStillRvsToFwd1x0020 Changeover : Still → capstan × 1 - - - - -

0B294E MechaRvs1xLoop Capstan × 1 being rotated - - 8Dh - -

0B29B4 MechaRvs2xToRvs1x Changeover : capstan × 2 → × 1 - - 8Dh - -

0B2A18 MechaStillRvsToRvs1x Changeover : Still → capstan × 1 - - - -

0B2BDE MechaStillFwdToRvs1x Changeover : Still → capstan × 1 - - - -

0B2E06 MechaStillFwdToRvs1x0010 Changeover : Still → capstan × 1 - - - - -

0B2EC6 MechaStillFwdToRvs1x0020 Changeover : Still → capstan × 1 - - - - -

0B30E4 MechaFwd2xLoop Capstan × 2 being rotated - - - 8Dh -

0B314A MechaFwd1xToFwd2x Changeover : capstan × 1 → × 2 rotation - - - 8Dh -

0B31DA MechaCueToFwd2x CUE end - - - 8Dh -

0B32FA MechaRvs2xLoop Capstan × 2 being rotated - - 8Dh - -

0B3360 MechaRvs1xToRvs2x Changeover : capstan × 1 → × 2 - - 8Dh - -

0B33C4 MechaRevToRvs2x Changeover to REV end - - 8Dh - -

0B34CE MechaCueLoop CUE - - - 8Dh -

0B3534 MechaFwd2xToCue Changeover to CUE - - - 8Dh -

0B35FE MechaHSCueLoop CUE - - - 8Dh -

0B3664 MechaFFToHSCue Changeover : FF → CUE - - - 8Dh -

0B38D0 MechaLCueLoop CUE - - - 8Dh -

0B3936 MechaFFToLCue Changeover : FF → CUE - - - 8Dh -

0B3B5C MechaReviewLoop REV - - 8Dh - -

0B3BC2 MechaRvs2xToRev Changeover to REV start - - 8Dh - -

0B3C8E MechaHSReviewLoop REV - - - 8Dh -

0B3CF4 MechaRewToHSReview Changeover : REW → REV - - 8Dh - -

0B3F68 MechaLReviewLoop REV - - - 8Dh -

0B3FCE MechaRewToLReview Changeover : REW → REV - - 8Dh - -

0B42DA MechaStillFwdLoop Still - - - - - -

0B431A MechaPlayToStillFwd Changeover : PLAY → Still - - - 8Dh -

0B448A MechaPlayToStillFwd0025 Changeover : PLAY → Still - - - - - -

0B44EC MechaStillRvsToStillFwd Changeover : Still RVS → Still FWD - - - - - -

0B45C8 MechaStillRvsToStillFwd0010 Changeover : Still RVS → Still FWD - - - - - -

0B4640 MechaFrameFwdToStillFwd Changeover : Forward fame feed → Still RVS - - - - - -

0B476C MechaStillRvsLoop Still - - - - - -

0B47AC MechaStillFwdToStillRvs Changeover : Still FWD → Still RVS - - - - - -

0B4888 MechaStillFwdToStillRvs0010 Changeover : Still FWD → Still RVS - - - - - -

0B48F4 MechaFrameRvsToStillRvs Changeover : Reverse frame feed → Still - - - - - -

0B4954 MechaSlowRvsToStillRvs Changeover : 1/10 slow RVS → Still - - - - - -

0B4A0E MechaStillFwdToFrameFwd Changeover to forward frame feed start - - - -

0B4A94 MechaFrameFwd0000 Forward frame feed - - - -

0B4BA6 MechaStillRvsToFrameRvs Changeover to reverse frame feed start - - - -

0B4C2C MechaFrameRvs0000 Reverse frame feed - - - -

0B4E1E MechaSlow10Fwd0000 1/10 slow FWD - - - -

0B51F4 MechaStillFwdToSlow10Fwd Changeover : Still → 1/10 slow FWD - - - -

0B5634 MechaSlow10Rvs0000 1/10 slow RVS - - - -

Page 126: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-24

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B5A0A MechaStillRvsToSlow10Rvs Changeover : Still → 1/10 slow RVS - - - -

0B5E48 MechaShuttleFwdLoop Edit search FWD - - - 8Dh -

0B5EAE MechaStillFwdToShuttleFwd Changeover : Still → Edit search FWD - - - -

0B6110 MechaShuttleRvsLoop Edit search RVS - - 8Dh - -

0B6176 MechaStillRvsToShuttleRvs Changeover : Still → Edit search RVS - - - -

0B6398 MechaSEFStillLoop Edit search FWD still - - - - - -

0B63D0 MechaShuttleFwdToSEFStill Edit search FWD → Edit search FWD still - - - 8Dh -

0B651C MechaShuttleFwdToSEFStill0025 Edit search FWD → Edit search FWD still - - - - - -

0B65E0 MechaSERStillLoop Edit search RVS still - - - - - -

0B6618 MechaShuttleRvsToSERStill Edit search RVS → Edit search RVS still - - - - - -

0B674A MechaShuttleRvsToSERStill0020 Edit search RVS → Edit search RVS still - - - - - -

0B67FE MechaEdPauseRvsLoop Changeover to Rec REW (RVS → FWD) - - - - - -

0B6836 MechaRecPauseToEdPauseRvs Rec search RVS start - - - -

0B6C7C MechaRReviewRvsLoop Changeover to Rec REW - - - - - -

0B6CB4 MechaEdPauseRvsToRRRvs Rec REW (RVS) start - - - - -

0B6E2C MechaEdPauseRvsToRRRvs0012 Rec search RVS (RVS) - - CEh - -

0B6EF2 MechaEdPauseRvsToRRRvs0015 Changeover to Rec search RVS (RVS) end - 8Dh - -

0B7128 MechaRReviewFwdLoop Changeover to REC REW - - - - - -

0B7160 MechaRRRvsToRRFwd Changeover to REC REW - 8Dh - -

0B74C6 MechaRRRvsToRRFwd0031 Changeover to REC REW - - - 8Dh -

0B762A MechaRRRvsToRRFwd0035 Changeover to REC REW - - - 8Dh -

0B7AA2 MechaEdSearchFwdLoop Rec search FWD - - - 8Dh -

0B7B08 MechaRecPauseToEdSearchFwd Rec search FWD start - - - -

0B7C4E MechaESFStillToEdSrchFwd Changeover : Rec search FWD → - - - -

Rec search FWD

0B7D82 MechaESRStillToESF Changeover : Rec search RVS → - - - -

Rec search FWD

0B82DA MechaEdSearchRvsLoop Rec search RVS - - 8Dh - -

0B8340 MechaEPRToEdSearchRvs Rec search RVS start - CEh - -

0B8436 MechaESFStillToESR Changeover : Rec search FWD → - - - -

Rec search RVS

0B8792 MechaESFStillLoop Changeover to Rec search FWD end - - - - - -

0B87CA MechaEdSearchFwdToESFStill Changeover to Rec search FWD end - - - 8Dh -

0B897A MechaESRStillLoop Changeover to Rec search RVS end - - - - - -

0B89B2 MechaESRToESRStill Changeover to Rec search RVS end - - - - - -

0B8DA6 MechaRStillToPhotoSearchFwd Photo search FWD start - - - -

0B8FBE MechaPhotoSearchFwd0000 Photo search FWD start - - - -

0B907E MechaPhotoSearchFwd0030 Photo search FWD start - - - -

0B9156 MechaPhotoSearchFwd0070 Photo search FWD start - - - 8Dh -

0B91AA MechaPhotoSearchFwd0090 Photo search FWD - - - 8Dh -

0B925A MechaPhotoSearchFwd0100 Changeover to photo search FWD end - - - 8Dh -

0B939A MechaPhotoSearchFwd0110 Changeover to photo search FWD end - - - -

0B9560 MechaPhotoSearchFwd0120 Changeover to photo search FWD end - - - - - -

0B95CC MechaPhotoSearchFwd0130 Changeover to photo search FWD end - - - - - -

0B9688 MechaPhotoSearchFwd0570 Changeover to photo search FWD end - - - - - -

0B9746 MechaPhotoSearchFwd0580 Photo search FWD end - - - - - -

0B98E0 MechaFStillToPhotoSearchRvs Changeover: Still → photo search RVS start - - - -

0B9AF4 MechaPhotoSearchRvs0000 Photo search RVS start - - - -

Page 127: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-25

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B9BC0 MechaPhotoSearchRvs0030 Photo search RVS start - - - -

0B9C34 MechaPhotoSearchRvs0040 Photo search RVS start - - - - -

0B9CD0 MechaPhotoSearchRvs0070 Photo search RVS start - - 8Dh - -

0B9D30 MechaPhotoSearchRvs0075 Photo search RVS start - - 8Dh - -

0B9D92 MechaPhotoSearchRvs0080 Photo search RVS - - 8Dh - -

0B9E40 MechaPhotoSearchRvs0100 Changeover to photo search RVS end - - 8Dh - -

0B9FAA MechaPhotoSearchRvs0110 Changeover to photo search RVS end - - - -

0BA268 MechaPhotoSearchRvs0120 Changeover to photo search RVS end - - - - - -

0BA2D4 MechaPhotoSearchRvs0130 Changeover to photo search RVS end - - - - - -

0BA3B8 MechaPhotoSearchRvs1080 Changeover to photo search RVS end - - - - - -

0BA476 MechaPhotoSearchRvs1090 Photo search RVS end - - - - - -

0BA58C MechaDsearchFwd1000 Date search FWD - - - 8Dh -

0BA692 MechaDsearchFwd1010 Changeover to date search FWD end - - - 8Dh -

0BA9BE MechaDsearchFwd1020 Changeover to date search FWD end - - 8Dh -

0BAC4A MechaDsearchFwd1030 Changeover to date search FWD end - - - - -

0BAD0A MechaDsearchFwd1040 Changeover to date search FWD end - CEh - -

0BAF18 MechaDsearchFwd1050 Changeover to date search FWD end - 8Dh - -

0BB0EE MechaDsearchFwd1065 Changeover to date search FWD/RVS end - - 8Dh - -

0BB2A4 MechaDsearchFwd1080 Changeover to date search FWD/RVS end - - - -

0BB550 MechaDsearchFwd1090 Changeover to date search FWD/RVS end - - - - -

0BB610 MechaDsearchFwd1100 Changeover to date search FWD/RVS end - - - 8Dh -

0BB8B4 MechaDsearchFwd1200 Changeover to date search FWD end - - - 8Dh -

0BB946 MechaDsearchFwd1210 Changeover to date search RVS end - - - 8Dh -

0BBB52 MechaDsearchRvs1000 Date search FWD - - 8Dh - -

0BBD2C MechaATNFwd0010 ATN search FWD start - CEh

0BBF80 MechaATNFwd0020 ATN search FWD - - - 8Dh -

0BC15C MechaATNFwd0035 Changeover to ATN search FWD end - - - 8Dh -

0BC1DA MechaATNFwd0040 Changeover to ATN search FWD end - - - 8Dh -

0BC2EA MechaATNFwd0050 Changeover to ATN search FWD end - - - 8Dh -

0BC3E8 MechaATNFwd0060 ATN search FWD end - - - - - -

0BC488 MechaATNRvs0010 ATN search RVS start CEh -

0BC756 MechaATNRvs0020 ATN search RVS - - 8Dh - -

0BC8FC MechaATNRvs0035 Changeover to ATN search RVS end - - 8Dh - -

0BC970 MechaATNRvs0040 Changeover to ATN search RVS end - - 8Dh - -

0BCA84 MechaATNRvs0050 Changeover to ATN search RVS end - - 8Dh - -

0BCB34 MechaATNRvs0055 Changeover to ATN search RVS end - - - - -

0BCBEE MechaATNRvs0060 ATN search RVS end - - - - -

0BCCE4 MechaAIPauseLoop Dubbing pause - - - - - -

0BCD1C MechaStillToAIPause Changeover: Still → Audio dubbing pause - CEh - -

0BD0A6 MechaStillToAIPause0010 Changeover: Still → Audio dubbing pause - - - - - -

0BD0FE MechaAInsertToAIPause Changeover to audio dubbing end - CEh - -

0BD516 MechaAInsertToAIPause0010 Dubbing end - - - - -

0BD602 MechaAInsertLoop Dubbing - - - 8Dh -

0BD676 MechaAIPauseToAInsert Dubbing start - - - -

0BD7C2 MechaAVINSLoop AV insert - - - 8Dh -

0BD7F0 MechaRecPauseToAVINS AV insert start - - - - - -

0BD8A6 MechaAVINSPauseToAVINS0010 Changeover to AV insert start - - - - - -

0BD914 MechaAVINSPauseToAVINS0020 AV insert start - - - -

Page 128: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-26

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0BDA60 MechaRecPauseToAVIPause Changeover to AV insert pause - - - - - -

0BDAAE MechaAVIPauseLoop AV insert pause - - - - - -

0BDAE6 MechaAVInsertToAVIPause AV insert end - - - - - -

0BDF48 ABSFwdSlw Forward frame feed - - - -

0BDFE8 ABSRvsSlw Reverse frame feed - - - -

0BE088 TurnRvsToFwd Changeover: Still RVS → Still FWS - - - -

0BE2F6 TurnRvsToFwd0010 Changeover: Still RVS → Still FWS - - - - -

0BE3B8 TurnRvsToFwd0020 Changeover: Still RVS → Still FWS - - - - - -

0BE522 TurnRvsToFwd0030 Changeover: Still RVS → Still FWS - - - 8Dh -

0BE592 TurnRvsToFwd0040 Changeover: Still RVS → Still FWS - - - - - -

0BE65E TurnRvsToFwd0060 Changeover: Still RVS → Still FWS - - - -

0BE76A TurnFwdToRvs Changeover: Still FWS → Still RVS - - - -

0BE9D2 TurnFwdToRvs0010 Changeover: Still FWS → Still RVS - - - - -

0BEA94 TurnFwdToRvs0020 Changeover: Still FWS → Still RVS - - - - - -

0BEBFE TurnFwdToRvs0030 Changeover: Still FWS → Still RVS - - 8Dh - -

0BEC6E TurnFwdToRvs0040 Changeover: Still FWS → Still RVS - - - - - -

0BED3A TurnFwdToRvs0060 Changeover: Still FWS → Still RVS - - - -

0BEE46 RepeatFrameFwd Forward frame feed - - - -

0BEF28 RepeatFrameRvs Reverse frame feed - - - -

0BF73A MechaErrorStop Mechanical error recovery (error stop) - - - - -

0C1646 MechaStillFwdToNewFSlow5 Changeover: Still → Slow FWD - - - -

0C16C0 MechaNewFSlow5Loop Slow FWD - - - 8Dh -

0C170E MechaNewFSlow5ToFStill Changeover: Slow FWD → Still - - - - - -

0C1758 MechaStillRvsToNewRSlow5 Changeover: Still → Slow RVS - - - -

0C17D4 MechaNewRSlow5Loop Slow RVS - - 8Dh - -

0C1822 MechaNewRSlow5ToRStill Changeover: Slow RVS → Still - - - - - -

0C24E4 MechaRecReady Changeover to Rec pause - - - - -

0C25B0 MechaRecReady0010 Changeover to Rec pause - - - - -

Page 129: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-27

Mechanical Error Applicability Table (for MAIN program version “1224” in FR MI-COM)

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0A9130 MechaLMOEmerg Loading error being stopped - - - - -

0A92B4 ResetMechaGAP At P. ON, mechanical reset - - - - -

0A93E4 ResetMechaSTOP At P. ON, mechanical reset - - - - - -

0A94C2 ResetMechaPLAY At P. ON, mechanical reset - - - -

0A95F6 ResetMechaPOPUP At P. ON, mechanical reset - - - - -

0A96AE ResetMechaLD1 At P. ON, mechanical reset - - - -

0A983A ResetMechaLD2 At P. ON, mechanical reset - - - -

0A99DC ResetMecha0020 At P. ON, changeover to mechanical reset end - - - - - -

0A9EBC MechaDoneToEjectEmerg Error EJECT - - - - -

0A9FAA MechaStopEmergToEjectEmerg0010 Error EJECT - - - -

0AA0C6 MechaStopEmergToEjectEmerg0020 Error EJECT - - - -

0AA192 MechaStopEmergToEjectEmerg0100 Error EJECT - - - - - -

0AA20C MechaStopEmergToEjectEmerg0200 Error EJECT - - - - -

0AA2B6 MechaStopEmergToEjectEmerg0210 Error EJECT - - - - - -

0AA54C MechaDoneToEject Error EJECT - - - -

0AA996 MechaStopToEject0020 EJECT (Tape inserted) - - - 8Dh

0AAB12 MechaStopToEject0030 EJECT (Tape inserted) - - - 8Dh

0AAD22 MechaStopToEject0040 EJECT (Tape inserted) - - - 8Dh

0AAE7E MechaStopToEject0050 EJECT (Tape inserted) - - - -

0AAF52 MechaStopToEject0060 EJECT (Tape inserted) - - - -

0AAFE4 MechaStopToEjectNoCas0010 EJECT (Tape not inserted) - - - -

0AB0A6 MechaStopToEjectNoCas0020 EJECT (Tape not inserted) - - - - -

0AB168 MechaStopToEjectNoCas0030 EJECT (Tape not inserted) - - - - -

0AB220 MechaStopToEjectNoCas0040 EJECT (Tape not inserted) - - - - -

0AB2E8 MechaStopToEjectNoCas0050 EJECT (Tape not inserted) - - - - -

0AB766 MechaStopLoop Stop - - - - -

0AB836 MechaEjectToStop Tape loading start - - -

0ABD82 MechaEjectToStop0020 Tape being loaded (Tape inserted) - - -

0ABF56 MechaEjectToStop0030 Tape being loaded (Tape inserted) - - - -

0AC102 MechaEjectToStop0200 Tape being loaded (Tape not inserted) - - - - -

0AC1CA MechaEjectToStop0210 Tape being loaded (Tape not inserted) - - - - -

0AC430 MechaEjectToStop0100 Tape being loaded (Tape inserted) - - - - -

0AC4BE MechaEjectToStop0110 Blank search start - - - -

0AC51A MechaEjectToStop0111 Tape loading end (Tape inserted) - - - - - -

0AC562 MechaEjectToStop0120 Blank search start - - - -

0AC6A4 MechaEjectToStop0124 Blank search start - - - 8Dh -

0AC72C MechaEjectToStop0128 Blank search start - - - -

0AC886 MechaEjectToStop0130 Blank being searched - - 8Dh - -

0AC9F8 MechaEjectToStop0132 Changeover to blank search end - - - - - -

0ACA62 MechaEjectToStop0133 Changeover to blank search end - 8Dh 8Dh -

0ACED6 MechaEjectToStop0136 Changeover to blank search end - - - -

0AD0AA MechaEjectToStop0137 Changeover to blank search end - - 8Dh -

0AD14E MechaEjectToStop0138 Changeover to blank search end - - - 8Dh -

0AD1BE MechaEjectToStop0139 Changeover to blank search end - - - - - -

0AD264 MechaEjectToStop0140 Changeover to blank search end - - - -

0AD410 MechaEjectToStop0180 Changeover to blank search end - - - - -

0AD50E MechaFFToStop Changeover : FF → STOP - - - 8Dh

Page 130: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-28

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0AD73A MechaRewToStop Changeover : REW → STOP - 8Dh -

0ADA7A MechaRecPauseToStop Changeover : Rec Pause → STOP - CEh -

0ADDE8 MechaPlayToStop Changeover : PLAY → STOP - - - 8Dh

0ADEFC MechaStillToStop Changeover : Still → STOP - CEh -

0AE2C0 MechaXToEnd Start of processing at end of tape - - - -

0AE612 MechaXToEnd0010 Processing at end of tape - - 8Dh - -

0AE696 MechaXToEnd0020 Processing at end of tape - 8Dh - -

0AEB58 MechaXToEnd0030 Processing at end of tape - - - - -

0AEC50 MechaTopLoop Processing at beginning of tape - - - - -

0AECB8 MechaXToTop Start of processing at beginning of tape - - - - -

0AEEEC MechaXToTop0020 Processing at beginning of tape - - - 8Dh

0AF192 MechaFFLoop FF - - - 8Dh -

0AF240 MechaFFSlowToFF Changeover : FF × 9.5 → × 30 - - - 8Dh -

0AF312 MechaFFToFFSlow Changeover : FF × 30 → × 9.5 - - - 8Dh -

0AF3BE MechaHSCueToFFSlow Changeover : CUE → FF - - - 8Dh -

0AF44A MechaStopToFFSlow Changeover : STOP → FF - -

0AF676 MechaRewLoop REW - - 8Dh - -

0AF724 MechaRewSlowToRew Changeover : REW × 9.5 → × 30 - - 8Dh - -

0AF7F6 MechaRewToRewSlow Changeover : REW × 30 → × 9.5 - - 8Dh - -

0AF8A2 MechaHSRevToRewSlow Changeover : REV → REW × 9.5 - - 8Dh - -

0AF94E MechaStopToRewSlow Changeover : STOP → REW -

0AFC5E MechaRecLoop Rec - - - 8Dh -

0AFCDA MechaRecPauseToRec Rec start - - - - - -

0B0056 MechaRecPauseToRec0010 Changeover to Rec start - - - - - -

0B00DC MechaRecPauseToRec0012 Changeover to Rec start - - - - - -

0B01FE MechaRecPauseToRec0015 Changeover to Rec start - - - -

0B0384 MechaRecPauseToRec0020 Changeover to Rec start - - - - - -

0B0578 MechaRecPauseLoop Rec PAUSE - - - - - -

0B05D6 MechaStopToRecPause Changeover : STOP → REC - -

0B074E MechaStopToRecPause0010 Changeover : STOP → REC - - - - - -

0B08AC MechaESFStillToRecPause Changeover to Rec search FWD end - - - - - -

0B091E MechaESRStillToRecPause Changeover to Rec search RVS end - CEh - -

0B0B76 RecEndingSequence Changeover to Rec end - - - - - -

0B0D54 RecEndingSequence0010 Changeover to Rec end - - - -

0B104A RecEndingSequence0030 Changeover to Rec end - - - -

0B11AA RecEndingSequence0050 Changeover to Rec end - - - - - -

0B146A MechaPlayLoop PLAY - - - 8Dh -

0B14FC MechaStopToPlay Changeover : STOP → PLAY - -

0B1628 MechaStopTopToPlay Changeover : STOP → PLAY - -

0B1762 MechaStopTopToPlay0010 Changeover : STOP → PLAY - - - 8Dh -

0B183C MechaStopTopToPlay0020 Changeover : STOP → PLAY - - - 8Dh -

0B18CC MechaStillFwdToPlay Changeover : Still → PLAY - - - -

0B1B8C MechaFwd1xToPlay Capstan × 1 being rotated - - - 8Dh -

0B1D6C MechaFwd1xLoop Capstan × 1 being rotated - - - 8Dh -

0B1E08 MechaPlayToFwd1x PLAY - - - 8Dh -

0B1E6A MechaFwd2xToFwd1x Changeover : capstan × 2 → × 1 - - - 8Dh -

0B206E MechaStillFwdToFwd1x Changeover : Still → capstan × 1 - - - -

0B22F4 MechaStillRvsToFwd1x Changeover : Still → capstan × 1 - - - -

Page 131: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-29

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B253C MechaStillRvsToFwd1x0010 Changeover : Still → capstan × 1 - - - - -

0B25FC MechaStillRvsToFwd1x0020 Changeover : Still → capstan × 1 - - - - -

0B299A MechaRvs1xLoop Capstan × 1 being rotated - - 8Dh - -

0B2A00 MechaRvs2xToRvs1x Changeover : capstan × 2 → × 1 - - 8Dh - -

0B2A64 MechaStillRvsToRvs1x Changeover : Still → capstan × 1 - - - -

0B2C2A MechaStillFwdToRvs1x Changeover : Still → capstan × 1 - - - -

0B2E52 MechaStillFwdToRvs1x0010 Changeover : Still → capstan × 1 - - - - -

0B2F12 MechaStillFwdToRvs1x0020 Changeover : Still → capstan × 1 - - - - -

0B3130 MechaFwd2xLoop Capstan × 2 being rotated - - - 8Dh -

0B3196 MechaFwd1xToFwd2x Changeover : capstan × 1 → × 2 rotation - - - 8Dh -

0B3226 MechaCueToFwd2x CUE end - - - 8Dh -

0B3346 MechaRvs2xLoop Capstan × 2 being rotated - - 8Dh - -

0B33AC MechaRvs1xToRvs2x Changeover : capstan × 1 → × 2 - - 8Dh - -

0B3410 MechaRevToRvs2x Changeover to REV end - - 8Dh - -

0B351A MechaCueLoop CUE - - - 8Dh -

0B3580 MechaFwd2xToCue Changeover to CUE - - - 8Dh -

0B364A MechaHSCueLoop CUE - - - 8Dh -

0B36B0 MechaFFToHSCue Changeover : FF → CUE - - - 8Dh -

0B391C MechaLCueLoop CUE - - - 8Dh -

0B3982 MechaFFToLCue Changeover : FF → CUE - - - 8Dh -

0B3BA8 MechaReviewLoop REV - - 8Dh - -

0B3C0E MechaRvs2xToRev Changeover to REV start - - 8Dh - -

0B3CDA MechaHSReviewLoop REV - - - 8Dh -

0B3D40 MechaRewToHSReview Changeover : REW → REV - - 8Dh - -

0B3FB4 MechaLReviewLoop REV - - - 8Dh -

0B401A MechaRewToLReview Changeover : REW → REV - - 8Dh - -

0B4326 MechaStillFwdLoop Still - - - - - -

0B4366 MechaPlayToStillFwd Changeover : PLAY → Still - - - 8Dh -

0B44D6 MechaPlayToStillFwd0025 Changeover : PLAY → Still - - - - - -

0B4538 MechaStillRvsToStillFwd Changeover : Still RVS → Still FWD - - - - - -

0B4614 MechaStillRvsToStillFwd0010 Changeover : Still RVS → Still FWD - - - - - -

0B468C MechaFrameFwdToStillFwd Changeover : Forward fame feed → Still RVS - - - - - -

0B47B8 MechaStillRvsLoop Still - - - - - -

0B47F8 MechaStillFwdToStillRvs Changeover : Still FWD ® Still RVS - - - - - -

0B48D4 MechaStillFwdToStillRvs0010 Changeover : Still FWD ® Still RVS - - - - - -

0B4940 MechaFrameRvsToStillRvs Changeover : Reverse frame feed ® Still - - - - - -

0B49A0 MechaSlowRvsToStillRvs Changeover : 1/10 slow RVS ® Still - - - - - -

0B4A5A MechaStillFwdToFrameFwd Changeover to forward frame feed start - - - -

0B4AE0 MechaFrameFwd0000 Forward frame feed - - - -

0B4BF2 MechaStillRvsToFrameRvs Changeover to reverse frame feed start - - - -

0B4C78 MechaFrameRvs0000 Reverse frame feed - - - -

0B4E6A MechaSlow10Fwd0000 1/10 slow FWD - - - -

0B5240 MechaStillFwdToSlow10Fwd Changeover : Still → 1/10 slow FWD - - - -

0B5680 MechaSlow10Rvs0000 1/10 slow RVS - - - -

0B5A56 MechaStillRvsToSlow10Rvs Changeover : Still → 1/10 slow RVS - - - -

0B5E94 MechaShuttleFwdLoop Edit search FWD - - - 8Dh -

0B5EFA MechaStillFwdToShuttleFwd Changeover : Still → Edit search FWD - - - -

0B615C MechaShuttleRvsLoop Edit search RVS - - 8Dh - -

Page 132: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-30

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B61C2 MechaStillRvsToShuttleRvs Changeover : Still → Edit search RVS - - - -

0B63E4 MechaSEFStillLoop Edit search FWD still - - - - - -

0B641C MechaShuttleFwdToSEFStill Edit search FWD → Edit search FWD still - - - 8Dh -

0B6568 MechaShuttleFwdToSEFStill0025 Edit search FWD → Edit search FWD still - - - - - -

0B662C MechaSERStillLoop Edit search RVS still - - - - - -

0B6664 MechaShuttleRvsToSERStill Edit search RVS → Edit search RVS still - - - - - -

0B6796 MechaShuttleRvsToSERStill0020 Edit search RVS → Edit search RVS still - - - - - -

0B684A MechaEdPauseRvsLoop Changeover to Rec REW (RVS → FWD) - - - - - -

0B6882 MechaRecPauseToEdPauseRvs Rec search RVS start - - - -

0B6CC8 MechaRReviewRvsLoop Changeover to Rec REW - - - - - -

0B6D00 MechaEdPauseRvsToRRRvs Rec REW (RVS) start - - - - -

0B6E78 MechaEdPauseRvsToRRRvs0012 Rec search RVS (RVS) - - CEh - -

0B6F3E MechaEdPauseRvsToRRRvs0015 Changeover to Rec search RVS (RVS) end - 8Dh - -

0B7174 MechaRReviewFwdLoop Changeover to REC REW - - - - - -

0B71AC MechaRRRvsToRRFwd Changeover to REC REW - 8Dh - -

0B7512 MechaRRRvsToRRFwd0031 Changeover to REC REW - - - 8Dh -

0B7676 MechaRRRvsToRRFwd0035 Changeover to REC REW - - - 8Dh -

0B7AEE MechaEdSearchFwdLoop Rec search FWD - - - 8Dh -

0B7B54 MechaRecPauseToEdSearchFwd Rec search FWD start - - - -

0B7C9A MechaESFStillToEdSrchFwd Changeover : Rec search FWD → - - - -

Rec search FWD

0B7DCE MechaESRStillToESF Changeover : Rec search RVS → - - - -

Rec search FWD

0B8326 MechaEdSearchRvsLoop Rec search RVS - - 8Dh - -

0B838C MechaEPRToEdSearchRvs Rec search RVS start - CEh - -

0B8482 MechaESFStillToESR Changeover : Rec search FWD → - - - -

Rec search RVS

0B87DE MechaESFStillLoop Changeover to Rec search FWD end - - - - - -

0B8816 MechaEdSearchFwdToESFStill Changeover to Rec search FWD end - - - 8Dh -

0B89C6 MechaESRStillLoop Changeover to Rec search RVS end - - - - - -

0B89FE MechaESRToESRStill Changeover to Rec search RVS end - - - - - -

0B8DF2 MechaRStillToPhotoSearchFwd Photo search FWD start - - - -

0B900A MechaPhotoSearchFwd0000 Photo search FWD start - - - -

0B90CA MechaPhotoSearchFwd0030 Photo search FWD start - - - -

0B91A2 MechaPhotoSearchFwd0070 Photo search FWD start - - - 8Dh -

0B91F6 MechaPhotoSearchFwd0090 Photo search FWD - - - 8Dh -

0B92A6 MechaPhotoSearchFwd0100 Changeover to photo search FWD end - - - 8Dh -

0B93E6 MechaPhotoSearchFwd0110 Changeover to photo search FWD end - - - -

0B95AC MechaPhotoSearchFwd0120 Changeover to photo search FWD end - - - - - -

0B9618 MechaPhotoSearchFwd0130 Changeover to photo search FWD end - - - - - -

0B96D4 MechaPhotoSearchFwd0570 Changeover to photo search FWD end - - - - - -

0B9792 MechaPhotoSearchFwd0580 Photo search FWD end - - - - - -

0B992C MechaFStillToPhotoSearchRvs Changeover: Still → photo search RVS start - - - -

0B9B40 MechaPhotoSearchRvs0000 Photo search RVS start - - - -

0B9C0C MechaPhotoSearchRvs0030 Photo search RVS start - - - -

0B9C80 MechaPhotoSearchRvs0040 Photo search RVS start - - - - -

0B9D1C MechaPhotoSearchRvs0070 Photo search RVS start - - 8Dh - -

0B9D7C MechaPhotoSearchRvs0075 Photo search RVS start - - 8Dh - -

Page 133: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-31

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0B9DDE MechaPhotoSearchRvs0080 Photo search RVS - - 8Dh - -

0B9E8C MechaPhotoSearchRvs0100 Changeover to photo search RVS end - - 8Dh - -

0B9FF6 MechaPhotoSearchRvs0110 Changeover to photo search RVS end - - - -

0BA2B4 MechaPhotoSearchRvs0120 Changeover to photo search RVS end - - - - - -

0BA320 MechaPhotoSearchRvs0130 Changeover to photo search RVS end - - - - - -

0BA404 MechaPhotoSearchRvs1080 Changeover to photo search RVS end - - - - - -

0BA4C2 MechaPhotoSearchRvs1090 Photo search RVS end - - - - - -

0BA5D8 MechaDsearchFwd1000 Date search FWD - - - 8Dh -

0BA6DE MechaDsearchFwd1010 Changeover to date search FWD end - - - 8Dh -

0BAA0A MechaDsearchFwd1020 Changeover to date search FWD end - - 8Dh -

0BAC96 MechaDsearchFwd1030 Changeover to date search FWD end - - - - -

0BAD56 MechaDsearchFwd1040 Changeover to date search FWD end - CEh - -

0BAF64 MechaDsearchFwd1050 Changeover to date search FWD end - 8Dh - -

0BB13A MechaDsearchFwd1065 Changeover to date search FWD/RVS end - - 8Dh - -

0BB2F0 MechaDsearchFwd1080 Changeover to date search FWD/RVS end - - - -

0BB59C MechaDsearchFwd1090 Changeover to date search FWD/RVS end - - - - -

0BB65C MechaDsearchFwd1100 Changeover to date search FWD/RVS end - - - 8Dh -

0BB900 MechaDsearchFwd1200 Changeover to date search FWD end - - - 8Dh -

0BB992 MechaDsearchFwd1210 Changeover to date search RVS end - - - 8Dh -

0BBB9E MechaDsearchRvs1000 Date search FWD - - 8Dh - -

0BBD78 MechaATNFwd0010 ATN search FWD start - CEh

0BBFCC MechaATNFwd0020 ATN search FWD - - - 8Dh -

0BC1A8 MechaATNFwd0035 Changeover to ATN search FWD end - - - 8Dh -

0BC226 MechaATNFwd0040 Changeover to ATN search FWD end - - - 8Dh -

0BC336 MechaATNFwd0050 Changeover to ATN search FWD end - - - 8Dh -

0BC434 MechaATNFwd0060 ATN search FWD end - - - - - -

0BC4D4 MechaATNRvs0010 ATN search RVS start CEh -

0BC7A2 MechaATNRvs0020 ATN search RVS - - 8Dh - -

0BC948 MechaATNRvs0035 Changeover to ATN search RVS end - - 8Dh - -

0BC9BC MechaATNRvs0040 Changeover to ATN search RVS end - - 8Dh - -

0BCAD0 MechaATNRvs0050 Changeover to ATN search RVS end - - 8Dh - -

0BCB80 MechaATNRvs0055 Changeover to ATN search RVS end - - - - -

0BCC3A MechaATNRvs0060 ATN search RVS end - - - - -

0BCD30 MechaAIPauseLoop Dubbing pause - - - - - -

0BCD68 MechaStillToAIPause Changeover: Still → Audio dubbing pause - CEh - -

0BD0F2 MechaStillToAIPause0010 Changeover: Still → Audio dubbing pause - - - - - -

0BD14A MechaAInsertToAIPause Changeover to audio dubbing end - CEh - -

0BD562 MechaAInsertToAIPause0010 Dubbing end - - - - -

0BD64E MechaAInsertLoop Dubbing - - - 8Dh -

0BD6C2 MechaAIPauseToAInsert Dubbing start - - - -

0BD80E MechaAVINSLoop AV insert - - - 8Dh -

0BD83C MechaRecPauseToAVINS AV insert start - - - - - -

0BD8F2 MechaAVINSPauseToAVINS0010 Changeover to AV insert start - - - - - -

0BD960 MechaAVINSPauseToAVINS0020 AV insert start - - - -

0BDAAC MechaRecPauseToAVIPause Changeover to AV insert pause - - - - - -

0BDAFA MechaAVIPauseLoop AV insert pause - - - - - -

0BDB32 MechaAVInsertToAVIPause AV insert end - - - - - -

0BDF94 ABSFwdSlw Forward frame feed - - - -

Page 134: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 3. INFORMATION FOR REPAIR · SERVICE HINTS

3-32

Address Label SequenceMecha Error

Drum Caps SReel TReel Loading DEW

0BE034 ABSRvsSlw Reverse frame feed - - - -

0BE0D4 TurnRvsToFwd Changeover: Still RVS → Still FWS - - - -

0BE342 TurnRvsToFwd0010 Changeover: Still RVS → Still FWS - - - - -

0BE404 TurnRvsToFwd0020 Changeover: Still RVS → Still FWS - - - - - -

0BE56E TurnRvsToFwd0030 Changeover: Still RVS → Still FWS - - - 8Dh -

0BE5DE TurnRvsToFwd0040 Changeover: Still RVS → Still FWS - - - - - -

0BE6AA TurnRvsToFwd0060 Changeover: Still RVS → Still FWS - - - -

0BE7B6 TurnFwdToRvs Changeover: Still FWS → Still RVS - - - -

0BEA1E TurnFwdToRvs0010 Changeover: Still FWS → Still RVS - - - - -

0BEAE0 TurnFwdToRvs0020 Changeover: Still FWS → Still RVS - - - - - -

0BEC4A TurnFwdToRvs0030 Changeover: Still FWS → Still RVS - - 8Dh - -

0BECBA TurnFwdToRvs0040 Changeover: Still FWS → Still RVS - - - - - -

0BED86 TurnFwdToRvs0060 Changeover: Still FWS → Still RVS - - - -

0BEE92 RepeatFrameFwd Forward frame feed - - - -

0BEF74 RepeatFrameRvs Reverse frame feed - - - -

0BF786 MechaErrorStop Mechanical error recovery (error stop) - - - - -

0C16D4 MechaStillFwdToNewFSlow5 Changeover: Still → Slow FWD - - - -

0C174E MechaNewFSlow5Loop Slow FWD - - - 8Dh -

0C179C MechaNewFSlow5ToFStill Changeover: Slow FWD → Still - - - - - -

0C17E6 MechaStillRvsToNewRSlow5 Changeover: Still → Slow RVS - - - -

0C1862 MechaNewRSlow5Loop Slow RVS - - 8Dh - -

0C18B0 MechaNewRSlow5ToRStill Changeover: Slow RVS → Still - - - - - -

0C2572 MechaRecReady Changeover to Rec pause - - - - -

0C263E MechaRecReady0010 Changeover to Rec pause - - - - -

Page 135: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 4. DISASSEMBLING ADJUSTMENT

CONTENTS

1. Disassembling and Reassembling ---------------------------------------------------------------------------------------------------------- 4-11-1 Disassembling / Reassembling Flowchart ----------------------------------------------------------------------------------------- 4-11-2 Separation of Front Unit ------------------------------------------------------------------------------------------------------------- 4-21-3 Separation of Accessory Shoe ------------------------------------------------------------------------------------------------------- 4-31-4 Separation of Right Cover Unit ----------------------------------------------------------------------------------------------------- 4-41-5 Separation of Rear Cover Unit ------------------------------------------------------------------------------------------------------ 4-51-6 Separation of Jack P.C.B ------------------------------------------------------------------------------------------------------------- 4-61-7 Separation of Left Cover Unit ------------------------------------------------------------------------------------------------------- 4-71-8 Separation of Camera Unit ----------------------------------------------------------------------------------------------------------- 4-81-9 Separation of Main and CAC P.C.B.'s ---------------------------------------------------------------------------------------------- 4-91-10 Separation of Recorder Holder ---------------------------------------------------------------------------------------------------4-101-11 Separation of Front Cover Unit --------------------------------------------------------------------------------------------------- 4-111-12 Disassembling of Left Cover Unit - 1 --------------------------------------------------------------------------------------------4-121-13 Disassembling of Left Cover Unit - 2 --------------------------------------------------------------------------------------------4-131-14 Disassembling of Left Cover Unit - 3 --------------------------------------------------------------------------------------------4-141-15 Separation of LCD Unit -----------------------------------------------------------------------------------------------------------4-151-16 Disassembling of Right Cover Unit - 1 ------------------------------------------------------------------------------------------4-161-17 Disassembling of Right Cover Unit - 2 ------------------------------------------------------------------------------------------4-171-18 Disassembling of Right Cover Unit - 3 ------------------------------------------------------------------------------------------4-181-19 Disassembling of Right Cover Unit - 4 ------------------------------------------------------------------------------------------4-191-20 Disassembling of LCD Unit - 1 ---------------------------------------------------------------------------------------------------4-201-21 Disassembling of LCD Unit - 2 ---------------------------------------------------------------------------------------------------4-211-22 Separation of CVF Unit ------------------------------------------------------------------------------------------------------------4-221-23 Separation of Rear Cover Unit ----------------------------------------------------------------------------------------------------4-231-24 Disassembling of CVF Unit - 1 ---------------------------------------------------------------------------------------------------4-241-25 Disassembling of CVF Unit - 2 ---------------------------------------------------------------------------------------------------4-251-26 Disassembling of CVF Unit - 3 ---------------------------------------------------------------------------------------------------4-261-27 Disassembling of Camera Unit - 1 -----------------------------------------------------------------------------------------------4-271-28 Disassembling of Camera Unit - 2 -----------------------------------------------------------------------------------------------4-281-29 Disassembling of Lens Unit -------------------------------------------------------------------------------------------------------4-291-30 List of Screws Used ----------------------------------------------------------------------------------------------------------------4-301-31 List of Disassembly Photos --------------------------------------------------------------------------------------------------------4-31

Page 136: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

2. Adjustment Procedures ----------------------------------------------------------------------------------------------------------------------4-332-1 Adjustment Items in Part Replacement --------------------------------------------------------------------------------------------4-332-2 AF Section Adjustment --------------------------------------------------------------------------------------------------------------4-34

2-2-1 CZ Automatic Adjustment -----------------------------------------------------------------------------------------------4-342-2-2 Cam Correction (AUTO) -------------------------------------------------------------------------------------------------4-35

2-3 IS Section Adjustment ---------------------------------------------------------------------------------------------------------------4-362-3-1 GYRO OFFSET Adjustment --------------------------------------------------------------------------------------------4-362-3-2 GYRO GAIN Adjustment ------------------------------------------------------------------------------------------------4-362-3-3 Virtual EEPROM and Flash Memory Writing ------------------------------------------------------------------------4-37

2-4 Camera Section Adjustment --------------------------------------------------------------------------------------------------------4-382-4-1 Iris Adjustment ------------------------------------------------------------------------------------------------------------4-382-4-2 WB Adjustment (1) ------------------------------------------------------------------------------------------------------- 4-382-4-3 Color Balance Adjustment -----------------------------------------------------------------------------------------------4-392-4-4 WB Adjustment (2) ------------------------------------------------------------------------------------------------------- 4-392-4-5 WB Adjustment (3) ------------------------------------------------------------------------------------------------------- 4-402-4-6 Virtual EEPROM and Flash Memory Writing ------------------------------------------------------------------------4-40

2-5 CCD Pixel Missing Compensation ------------------------------------------------------------------------------------------------4-412-6 Color Balance Check ----------------------------------------------------------------------------------------------------------------4-422-7 Recorder Section Adjustment -------------------------------------------------------------------------------------------------------4-43

2-7-1 Setting for Destination ----------------------------------------------------------------------------------------------------4-432-7-2 Y LEVEL Adjustment ----------------------------------------------------------------------------------------------------4-442-7-3 C LEVEL Adjustment ----------------------------------------------------------------------------------------------------4-452-7-4 AGC Initial Value Adjustment -------------------------------------------------------------------------------------------4-452-7-5 SWP Adjustment ----------------------------------------------------------------------------------------------------------4-462-7-6 C. FG Adjustment ---------------------------------------------------------------------------------------------------------4-462-7-7 Automatic Adjustment of Reel FG --------------------------------------------------------------------------------------4-462-7-8 Flash Memory Writing ---------------------------------------------------------------------------------------------------4-462-7-9 Battery Voltage Drop Adjustment ---------------------------------------------------------------------------------------4-47

2-8 Tape Path Adjustment ----------------------------------------------------------------------------------------------------------------4-48

Page 137: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-1

1. Disassembling and ReassemblingNotes :(1) When replacing the flat cable with a new one, allow it to remain folded the same as the original part.(2) The flat cable has a contact orientation to be engaged with the connector. Refer to the instructions in the disassembly procedure

diagram and interconnection diagram for boards. ⋅ Lateral engaging connector

(The instructions are given in the disassembly procedure diagram and board interconnection diagram.): Contacts are positioned downward. (board side)

∗ : Contacts are positioned upward. ⋅ Lengthwise engaging connector

(The instructions are given only in the boards interconnection diagram.)Indicated by →. Arrowheads indicate the contacts, and the shafts indicate the noncontacts.

(3) To secure screws, apply the Three Bond 1401B (CY9-8011-000)(4) If any part to be replaced has UL tape attached on it, be sure to reattach UL tape at the same position in reassembling.

1-1 Disassembling / Reassembling Flowchart

(1) Find the replacement part on the chart, and disassemble it following the instruction on chart.(2) Reassembling can be made by reversing the disassembling procedures.

START : MAIN FLOW

: SUB FLOW

: MAIN UNIT1-2 Front Cover Unit 1-11 Mic Ass'y

1-21 LCD P.C.B.

1-20 Hinge Ass'y1-4 Right Cover Unit 1-15 LCD Unit

1-3 Accessory Shoe

1-5 Rear Cover Unit

1-12 Operetion Key Ass'y

1-13 Speaker Ass'y

1-13 EJECT P.C.B.

1-14 Cassette Arm Ass'y

1-16 CARD P.C.B.

1-17 R-KEY Back Light Ass'y

1-18 R-KEY P.C.B.

1-18 DSW2 P.C.B.

1-23 DC P.C.B.

1-10 Recorder Holder

1-10 DMC III

1-9 CAC P.C.B.

1-9 MAIN P.C.B.

1-28 CCD P.C.B.

1-29 Lens Unit

1-8 Recorder Unit

1-8 Camera Unit

1-6 JACK P.C.B.

1-8 Recorder, Camera Unit

1-7 Left Cover Unit

1-26 CVF P.C.B.1-22 CVF Unit

Page 138: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-2

1-2 Separation of Front Unit

(1) Open the cassette cover, F Jack Cover and L Jack Cover and remove seven screws (b × 5, c × 1, d × 1).(2) Disconnect CN701 and detach the Front Cover Unit.(3) Remove the Cushion.

<Note on Reassembling>(1) Attach the Cushion at the position shown in the figure. Run the MIC cable through the slit of the Cushion.

Fig. 4-1

(1) - b

Cassette Cover

Cushion

(1)(1)

(2)

(2)

(3)

(1) Note on Reassembling (1)

(1) - b

(1) - b

(1) - b

Front Cover Unit

F Jack Cover

L Jack Cover

Cushion

Take care to prevent the cushion from hanging over the boss.

Take care to prevent the cushion from being pushed out of this line to the right side.

Hold the cushion by IR-LED holder.

Run the MIC Cable through the slit of the Cushion.

CN701

CN701

(1) - c

(1) - d

3mmMetalM1.7

b

4mm

MetalM1.7

c

4.5mm

MetalM1.7

(self tap)

d

Page 139: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-3

1-3 Separation of Accessory Shoe

(1) Remove four screws (a × 4) and detach the Accessory Shoe.

Fig. 4-2

Accessory Shoe

(1)

(1) - a

5mm

a

MetalM1.7

Flat Head Screw

Page 140: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-4

1-4 Separation of Right Cover Unit

(1) Remove five screws (b × 3, c × 1, d × 1), disconnect CN990, CN1502 and CN4001 and detach the Right Cover Unit.(2) Draw out the Shaft and detach the Card Cover. (Only for DM-MV650i E, DM-MV630i E)

<Note on Reassembling>(1) Push the CN990 and CN1502 sufficiently so as to prevent them from being pinched in the part A.(2) Since the Shaft may come out easily, take care not to lose the Shaft. (Only for DM-MV650i E, DM-MV630i E)

Before using the Card Cover and Shaft supplied for repair service, remove their protection sheet and shaft-dropping preventivetape.

Fig. 4-3

Note on Reassembling (1)

(1) - b

(1) - b

(1) - d

(1)(1)

(1)(1)

CN1502

CN990

CN4001

Right Cover Unit

back of the Right Cover UnitA

(1) - b

Shaft

Shaft remove

Card Cover

(2)

DM-MV650i EDM-MV630i Eonly

(1) - c

3mmMetalM1.7

b

4mm

MetalM1.7

c

4.5mm

MetalM1.7

(self tap)

d

Page 141: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-5

1-5 Separation of Rear Cover Unit

(1) Remove three screws (d × 3), disconnect the CN1501, CN3201 and CN3202 and detach Rear Cover Unit.

Fig. 4-4

CN1501

CN3201

Rear Cover Unit

CN3202 (1)

(1)

(1)

(1)

(1) - d4.5mm

MetalM1.7

(self tap)

d

Page 142: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-6

1-6 Separation of Jack P.C.B

(1) Remove two screws (b × 2), disconnect the CN5, CN2101 and CN6 and detach the Jack P.C.B.(2) Open the Cassette Cover and remove one screw (c × 1). Pull the part A to this side while lifting it, disengage the two claw parts B

and detach the C Lock Plate Unit.(3) Remove two screws (b × 2) and detach the Tripod Base, C Lock Plate and Support Plate.

<Note on Reassembling>(1) When reassembling the C Lock Plate Unit, insert the part C into the hole and reverse the disassembling procedures (2). Make sure

that the two Dowels are connected.

Fig. 4-5

3mmMetalM1.7

b

4mm

MetalM1.7

c

JACK P.C.B.

(2)

(1)(1)

(1)

(3)

(2)

CN2101

CN6

CN5

Tripod Base

Dowels B

Pull this part frontward.

Lift it.

C Lock Plate

C Lock Plate Unit

Support Plate(1) - b

(2) - c

(1) - b

(3) - b

Part A

Part C

Page 143: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-7

1-7 Separation of Left Cover Unit

(1) Remove three screws (b × 3), disconnect the CN101 and detach the Left Cover Unit.

Fig. 4-6

Left Cover Unit

(1)(1)

(1) - b

(1) - b

CN101

3mmMetalM1.7

b

Page 144: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-8

1-8 Separation of Camera Unit

(1) Remove two screws (b × 2), disconnect the CN891, CN1001 and CN1201 and detach the Camera Unit.Note : The CN891 connector should be disconnected in the DM-MV650i E only. In the DM-MV630i E, DM-MV600i E,

DM-MV600 E, DM-MV590 E, it is not required to disconnect the CN891 connector since the shoe connectorAss’y and its relevant flexible cable are not provided.

Fig. 4-7

(1)

(1)

(1)

(1)

Camera Unit

CN891

(DM-MV650i E only)

CN1001

CN1201

(1) - b

(1) - b

3mmMetalM1.7

b

Page 145: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-9

1-9 Separation of Main and CAC P.C.B.'s

(1) Remove one screw (b × 1), disconnect the CN1101 and CN1002 (B to B) and detach the CAC P.C.B.(2) Remove three screws (b × 3), disconnect the CN300, CN301, CN302, CN303, and CN2000 and detach the MAIN P.C.B.(3) Detach the soldered part on the PM Shield 1 and detach the HA Shield and PM Shield 1 and 2.

Fig. 4-8

CN301

HA Shield

MAIN P.C.B.

CAC P.C.B.

PMShield 2

PMShield 1

Solder

DMC III

CN303

CN1101(B to B)

CN302

(1)

(3)

(3)

(2)

CN2000

CN300

CN1002(B to B)

(1) - b

(2) - b

(2) - b

(2) - b

(2)

3mmMetalM1.7

b

Page 146: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-10

1-10 Separation of Recorder Holder

(1) Remove three screws (e × 3) and detach the Recorder Holder, vibration isolating Rubber and Spring.Note : When placing the DMC III mechanical unit with the recorder holder removed, be sure to orient the drum side

upward. Take care not to touch the tape running surface of the drum.

<Note on Reassembling>(1) Before mounting the Recorder Holder, make sure that three vibration isolating Rubber parts have been attached properly.(2) When using the vibration isolating Rubber parts supplied for repair service, apply HANAL KS-39M (DY9-3053-000) to the entire

surface of each vibration isolating Rubber part.(3) Attach the Spring as illustrated below.(4) Attach UL Tape as illustrated below to secure the Flexible Cable.

Fig. 4-9

Note on Reassembling (3)CAUTION Note on Reassembling (4)

(1)

Rubber

Recorder Holder

DMC III

(1) - e

(1) - e

Rubber

RubberSpring

UL Tape (9 × 15)Be sure to place the unit with its drum facing upward.

Spring

3.4mm

e

MetalM1.4

Page 147: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-11

1-11 Separation of Front Cover Unit

(1) Remove three screws (d × 3) and detach the Lens Cover, L Jack Cover and F Jack Cover.(2) Remove two screws (d × 2) and detach the Microphone Cover, Rubber, Microphone Ass'y and Microphone Shield.

<Note on Reassembling>(1) Treat the Microphone Ass'y Cable as illustrated below.

Fig. 4-10

Note on Reassembling (1)

(1)

(2)

(1)

(1)Lens Cover

MIC Shield

F Jack Cover

L Jack Cover

Front Cover Unit

MIC Holder

MIC Ass'y

RubberBlack/White

Black/Red

Take care to make the four cables come out of the front cover in line so as to prevent them from crossing each other.

Black/Red Black/White

(1) - d(2) - d

4.5mm

MetalM1.7

(self tap)

d

Page 148: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-12

1-12 Disassembling of Left Cover Unit - 1

(1) Remove four screws (d × 4) and detach the Operation Key Ass'y.(2) Remove the Shaft and detach the Hand Strap.(3) Remove one screw (d × 1) and detach the Change Plate and Change Knob. (Only for DM-MV650i E, DM-MV630i E)

<Note on Reassembling>(1) Attach the Change Knob, Change Plate and Operation Key Ass'y Change SW as illustrated below.

(Only for DM-MV650i E, DM-MV630i E)

<Instruction for Supplies>Change Plate part on Left Cover : HANAL FL-778 (DY9-3026-000) (Only for DM-MV650i E, DM-MV630i E)

Fig. 4-11

Note on Reassembling (1)(DM-MV650i E,DM-MV630i E only)

Instruction for Supplies(DM-MV650i E, DM-MV630i E only)

(2)

(1)

Change Plate

Change Knob

Hand Strap

Shaft

Operation Key Ass'y

Change Plate

Change Knob

Change SW

Hanal FL-778

DM-MV650i E,DM-MV630i E only

(3) - d

(1) - d

(1) - d

(1) - d

4.5mm

MetalM1.7

(self tap)

d

Page 149: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-13

1-13 Disassembling of Left Cover Unit - 2

(1) Remove two screws (f × 2) and detach the GND Plate, Cushion, Speaker Holder and Speaker Ass'y.(2) Remove one screw (i × 1) and detach the EJECT P.C.B.

<Note on Reassembling>(1) Run the Speaker Ass’y cable under the GND Plate and secure it with the Cushion as illustrated below. Extend the cable to the

underside of the line on the Left Cover.

Fig. 4-12

Note on Reassembling (1)

4mm

BlackM1.7

(self tap)

f2.5mm

MetalM1.7

i

(1)

(2)

(1)Speaker Ass'y

Speaker Holder

GND Plate

EJECT P.C.B.

Cushion

Speaker

Align the cushion with the end of rib and the end of plate.

White Black

GND Plate

Extend the cable to the underside of the line.

(1) - f

(1) - f

(2) - i

Page 150: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-14

1-14 Disassembling of Left Cover Unit - 3

(1) Remove four screws (i × 4) and detach the Cassette Cover while taking care of the two claw parts.(2) Remove three screws (f × 3) and detach the Cassette Arm Ass'y.(3) Detach the Open Knob.

Fig. 4-13

2.5mmMetalM1.7

i4mm

BlackM1.7

(self tap)

f

(1)

(3)

(2)

Left Cover

Cassette Cover

Cassette Arm Ass'y

Open Knob

Claw

Claw(2) - f

(2) - f

(2) - f

(1) - i

(1) - i

(1) - i

Page 151: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-15

1-15 Separation of LCD Unit

(1) Disconnect the CN101.(2) Open and turn the LCD Unit, remove four screws (c × 2, d × 2) and detach the LCD Unit.

<Note on Reassembling>(1) For the DSW Cable, provide wiring arrangement as shown below.

Fig. 4-14

Note on Reassembling (1)

4mm

MetalM1.7

c

4.5mm

MetalM1.7

(self tap)

d

LCD Unit

(2)

(1)

(2)

CN101

CN101

Hook the cable over the both ends of the DSW2 P.C.B.

DSW Cable

(2) - c

(2) - d

Page 152: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-16

1-16 Disassembling of Right Cover Unit - 1

(1) Detach the Lithium Battery Cover.(2) Remove four screws (h × 4), disconnect the CN4002 and detach the Card P.C.B. and AP Knob.

<Note on Reassembling>(1) Bend the Flexible cable and secure it with UL Tape as illustrated below. Hook the right edge of the CARD P.C.B. to the Claw part

A for mounting.(2) In remounting, engage the SW4004 knob on the CARD P.C.B. with the AP Knob.

Fig. 4-15

4mm

MetalM1.7

(self tap)

h

Note on Reassembling (1)

CARD P.C.B.

Claw A

(2)

(1)

CN4002

Claw A

SW4004

CARD P.C.B.

AP Knob

Lithium Battery Cover

(2)

(2)

(2) - h

(2) - h

Page 153: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-17

1-17 Disassembling of Right Cover Unit - 2

(1) Remove the Cushion.(2) Remove two screws (g × 1, h × 1), disconnect the CN100 and detach the R-Key Backlight Ass'y and R-Key Backlight Holder.

(Only for DM-MV650i E)Note : List the R-Key Backlight Ass’y while pressing the part A of R-Key Backlight Holder outward, and slide the ass’y

to detach it while taking care not to damage the Flexible Cable.

<Note on Reassembling>(1) Attach the Cushion at the position as illustrated below.

Fig. 4-16

Note on Reassembling (1)

Caution

R-KEY Back Light Holder

R-KEYBack Light Ass'y

R-KEYBack Light Ass'y

Cushion

Cushion

Part ADSW2 P.C.B.

Align the cushion with the step difference surface.

Align the cushion with the rib surface.

DM-MV650i E only

CN100

FPC

Shorter cushion for DM-MV630i E, MV600i E, MV600 E, MV590 E(Same affixing position)

(2)(2)

(1)

(2)

DM

-MV

650i

ED

M-M

V63

0i E

,600

i E,6

00 E

,590

E

(2) - g

MetalM1.7

2mm

g4mm

MetalM1.7

(self tap)

h

(2) - h

Page 154: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-18

1-18 Disassembling of Right Cover Unit - 3

(1) Remove nine screws (d × 3, g × 4, j × 2) and the two soldered parts A and detach the R-Key P.C.B., DSW2 P.C.B., Holders 1 and2, GND Plates 1 and 2 and Card Cover Lock.

<Note on Reassembling>(1) Treat the DSW2 P.C.B. cable as illustrated below. Hook the top of the DSW2 P.C.B. to the Claw part B for mounting.(2) Treat the R-Key P.C.B. flexible cable as illustrated below.

When using the part supplied for repair service, bend the flexible cable part A to 45°.(3) Attach UL Tape at the position indicated in the figure shown below. (Only for DM-MV650i E)

Fig. 4-17

Note on Reassembling (1)Note on Reassembling (2)

Note on Reassembling (3)(DM-MV650i E only)

R-KEYP.C.B.

UL Tape (5 × 10)

DSW2 P.C.B.

GND Plate 2

Holder 2

Holder 1

Attach UL Tape according to the profile of the Connector.

SolderedParts A

Card Cover Lock

Plate 1

Take care to prevent the cable from hanging over the boss part.

Flexible Cable part A

GND Plate 1

(1)

(1)

(1)

(1) - d (1) - d

(1) - d

(1) - j

(1) - j

(1) - g

(1) - g

(1) - g

Hold the flexible cable part A with the plate.

DM-MV650i EDM-MV630i Eonly

UL Tape(5 × 10)

DSW2P.C.B.

Claw B

Claw B

4.5mm

MetalM1.7

(self tap)

d

MetalM1.7

2mm

g

5.5mm

MetalM1.7

(self tap)

j

Page 155: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-19

1-19 Disassembling of Right Cover Unit - 4

(1) Remove one screw (j × 1) and detach the LCD Lock Holder, LCD Lock, LCD Open Knob, LCD Lifter, and Spring 1and 2.

<Note on Reassembling>(1) With both ends of spring 2 engaged with the Hook, assemble the LCD Lock into the Right Cover Unit. Then, after mounting the

LCD Lock Holder, remove the part A from the Hook.Note : (1) If the part-A side is not removed from the Hook, the specified level of spring pressure is not provided at the

LCD Lock.(2) If the part is not unhooked after reassembling the LCD lock holder, the LCD lock could be detached from

the right cover unit.

Fig. 4-18

Note on Reassembling (1)

LCD Lock Holder

Spring 1

LCD Lifter

LCD Lock

Spring 2

Spring 2

Part A

LCD Open Knob

(1)

(1)

(1)

(1)

(1) - j

5.5mm

MetalM1.7

(self tap)

j

Page 156: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-20

1-20 Disassembling of LCD Unit - 1

(1) Remove three screws (b × 3) and detach the LCD Top Cover.Note : When detaching the LCD Top Cover, be careful of the claw parts A and B inside the cover.

(2) Disconnect the CN901 and CN902 and detach the Hinge Ass'y.

<Note on Reassembling>(1) When attaching the Hinge Ass'y, take care not to pinch the white cable of Backlight Ass'y.(2) Before attaching the LCD Top Cover, be sure to insert the claw part A.(3) Insert the CN901 and CN902 to their deepest positions securely, and check if there is no gap due to insufficient seating.

Fig. 4-19

Note on Reassembling (1)

3mmMetalM1.7

b

LCD Top Cover

Inside the LCD top cover

(2)

(2)

(2)

(1)

CN901

CN902

(1) - b

(1) - b

(1) - b

Claw A

Claw B

Take care not to pinch the cable.

Hinge Ass'y

Hinge Ass'y

CN901

CN902

Check that there is no gap due to unseating.

Page 157: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-21

1-21 Disassembling of LCD Unit - 2

(1) Detach the LCD Bottom Cover and Bottom Cover Sheet.(2) Detach the soldered parts A and B, disconnect the CN903, remove one screw (b × 1) and detach the LCD P.C.B.(3) Demount the LCD Ass'y from the Backlight Ass'y.

Note : The LCD Unit can be disassembled without detaching the Right Cover Unit.

<Note on Reassembling>(1) Detach the Bottom Cover Sheet by sliding it between the LCD Bottom Cover and the LCD Holder. Take care to prevent the Bottom

Cover Sheet from hanging out of the LCD Bottom Cover.(2) Treat the Backlight Ass'y Cable as illustrated below. After performing soldering, secure the Cable with adhesive.

<Instruction for Supplies>Securing of Backlight Ass'y Cable : DIA BOND 1663G

Fig. 4-20

Note on Reassembling (1)

Note on Reassembling (2)Instruction for Supplies

CN903(2)(2)

(1)

(3)

(1)

LCD Ass'y

Back Light Ass'yLCD P.C.B.

Soldered Parts A

SolderedParts B

LCD Holder

Bottom Cover Sheet

Bottom Cover SheetLCD Bottom Cover

Soldered Parts A

Soldered Parts B

Diabond Diabond

(2) - b

3mmMetalM1.7

b

Page 158: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-22

1-22 Separation of CVF Unit

(1) Remove UL Tape.(2) Remove six screws (o × 4, p × 2) and detach the CVF Unit.

Note : When drawing out the CVF-CAC FPC on the CVF Unit from the Rear Cover Unit, take care not to damage theCVF-CAC.

<Note on Reassembling>(1) Attach the CVF-CAC FPC as illustrated below. Secure it with UL Tape.

Fig. 4-21

Note on Reassembling (1)

CVF Unit

Rear Cover Unit

(2)

Insert the CVF-CAC FPC into the grooves.

UL Tape(20 × 10)

Bend the CVF-CAC FPC.

UL Tape

(1)

3mmMetalM1.7

(Noji Rock)

o

4mm

MetalM1.7

(Noji Rock)

p

(2) - o

(2) - o

(2) - p

(2) - p

Page 159: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-23

1-23 Separation of Rear Cover Unit

(1) Remove four screws (h × 4) and detach the Battery Terminal Ass'y and GND Plate.(2) Remove one screw (h × 1) and detach the DC P.C.B.(3) Detach the Battery Eject Lever and Sring.

<Note on Reassembling>(1) Secure the cables of Battery Terminal Ass'y with the hooks as illustrated below.(2) When attaching the Battery Terminal Ass'y, screw the Red, Black, White and Gray cables in this order.

<Instruction for Supplies>Rear Cover, Spring : Apply HANAL FL-778. (DY9-3026-000)

Fig. 4-22

Note on Reassembling (1)

Instruction for Supplies

GND Plate

(1)

RedBlack

Battery TerminalAss'y

Rear Cover

(2)

(3)

White

Gray

Spring

Battery Eject Lever

(1) - h

(1) - h

(2) - h

Black

White

Gray

Red Secure the cables with the hooks.

Secure the cables with the hooks.

Hanal FL-778

Hanal FL-778

DC P.C.B.

4mm

MetalM1.7

(self tap)

h

Page 160: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-24

1-24 Disassembling of CVF Unit - 1

(1) Detach the Dust Cover, remove two screws (b × 2) and detach the CVF Bottom Cover.(2) Remove one screw (d × 1), disengage the holes on CVF-CAC FPC from the protruded parts A and draw out the finder while taking

care not to damage the CVF-CAC FPC.(3) Remove two screws (b × 2) and detach the CVF Hinge Ass'y.

<Note on Reassembling>(1) Engage the holes on CVF-CAC FPC and the protruded parts A as illustrated below.

Fig. 4-23

Note on Reassembling (1)

CVF Bottom Cover

(1)

(3)

(1)

FinderProtrudedParts A

(2)

Lift Up

Remove

Finder(2)

CVF-CACFPC

Protruded Parts A Hinge Ass'y

CVF Hinge Ass'y

CVF Top CoverDust Cover

(2) - d

(3) - b

(1) - b

CVF-CAC FPC

3mmMetalM1.7

b

4.5mm

MetalM1.7

(self tap)

d

Page 161: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-25

1-25 Disassembling of CVF Unit - 2

(1) Remove two screws (d × 2) and detach the Eyepiece, CVF Lens Holder, CVF Knob, Rubber and Lens Holder.(2) Detach the two claw parts A and detach the Lens.

<Note on Reassembling>(1) When attaching the Lens into the Lens Holder, take care to orient the lens correctly.(2) When attaching the CVF Knob, attach the Lens Holder Boss as illustrated below. Be sure to attach the rubber part.

<Instruction for Supplies>Lens Holder contacting surface : HANAL KS-39M (DY9-3053-000)Rubber Top surface : HANAL KS-39M (DY9-3053-000)

Fig. 4-24

Note on Reassembling (1)

Note on Reassembling (2)Instruction for Supplies

Claw A

(1) (1)

Lens Holder contacting surface

Hanal KS-39M

Hanal KS-39M

(1)

(1)

(2)

(1) - d(1) - dCVF Lens Holder

Rubber

CVF Knob

Lens Holder

Lens

Eyepiece

Rubber top surface

Rubber

Lens KnobBoss

Lens Holder

CVFInner Cover

Lens Holder Lens

CVF Inner Cover

4.5mm

MetalM1.7

(self tap)

d

Page 162: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-26

1-26 Disassembling of CVF Unit - 3

(1) Disconnect the CN4101 and detach the CVF-CAC FPC.(2) Detach the three claw parts A and detach the components from the CVF P.C.B. to the Mask Plate.(3) Detach the two claw parts B, disconnect the CN4102 and separate the CVF P.C.B., reflector and LCD Ass'y.

<Note on Reassembling>(1) Treat the LCD Ass'y flexible cable by inserting it into the CVF Inner Cover as illustrated below.(2) Before using the CVF-CAC FPC supplied for repair service, securely fold it at the position illustrated below.

Fig. 4-25

Note on Reassembling (1)

Note on Reassembling (2)

CVF-CAC FPC

TOCN4101

DH2-5022-000

mk OR 1 03

CVF Inner Cover

Claw A

Claw B

Mask Plate

LCD Ass'y

Cushion

Diffuser

Reflector

CVF-CAC FPC

CVFP.C.B.

(3)CN4102

CN4101

(1)

(2)

Folding in a crest formFolding in a trough form

Page 163: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-27

1-27 Disassembling of Camera Unit - 1

(1) Remove one screw (k × 1) and detach the Accessory Shoe.Note : Lift the hooked parts of the two Dowels diagonally and detach the Shoe Base backward.

(2) Remove three screws (l × 3) and detach the Lens Holder, vibration isolating Rubber and Shield.

<Note on Reassembling>(1) When using the vibration isolating Rubber parts supplied for repair service, apply HANAL FL-778 (DY9-3026-000) to the entire

surface of each vibration isolating Rubber part.(2) Attach Shield at the position indicated in the figure shown below.

Fig. 4-26

Caution

Rubber

AAS FPC(DM-MV650i E only)

Shoe Base

(1)

(1) - k

Rubber

Rubber

(2)

Shield

Lens Holder

Shield

Attach the shield so that the cutout of the shield is aligned with the hole on the lens holder. (Protrusion to the hole is not allowed.)

Lens Holder

Shoe Spacer(DM-MV630i E, DM-MV600i EDM-MV600 E, DM-MV590 E)

Shoe Connector Ass'y(DM-MV650i E)

Lift Up

Dowel

Dowel

Note on Reassembling (2)

(2) - l

(2) - l

3.8mm

k

MetalM1.7

Steped Screw

l4.5mm

BlackM1.7

Steped Screw

Page 164: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-28

1-28 Disassembling of Camera Unit - 2

(1) Remove two screws (m × 2) and detach the CCD P.C.B., CCD Ass'y, Rubber part and Low-Pass Filter.(2) Detach the soldered part A and detach the CCD P.C.B. and CCD Ass'y.

<Note on Reassembling>(1) Before attaching the CCD P.C.B., secure the P.C.B. with screws (m × 2) and perform soldering of the CCD Ass'y and CCD P.C.B.

Fig. 4-27

6mm

MetalM1.7

(self tap)

m

(1) - m

(1)(2)

CCD P.C.B.

CCD Ass'y

Rubber

Low-Pass Filter

CCD

Lens

Low-Pass Filter CCD P.C.B.

(2)

AFace thick side toward Lens side

Page 165: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-29

1-29 Disassembling of Lens Unit

(1) Remove the Lens Rubber part and three screws (m × 3). Demount the Front Lens Ass'y.(2) Remove six screws (d × 4, n × 2) and solder (α). Demount the PZ Motor, AF Motor, IG Meter Ass'y, PZ Shaft, and AF Shaft.

<Instruction for Supply>On the AF/PZ Shaft and Guide Bar : LOGENEST LAMBDA A-74 (CY9-8102-000)

Fig. 4-28

4.5mm

MetalM1.7

(self tap)

d

6mm

MetalM1.7

(self tap)

m3.5mm

MetalM1.7

(self tap)

n

Instruction for Supply

PZ Shaft

PZ Shaft

AF Shaft

AF Shaft

PZ Motor

IG Meter Ass'y

AF Motor

Gide Bar

Front Lens Ass'y

LOGENEST LAMBDAA-74

Lens Rubber

Gide Bar

Guide Bar × 2

(1)

(2) - α

(2) - α

(2) - α

(2)

(2)

(2) - d

(2) - d

(2) - n

(1) - m

(1) - m

(1) - m

Page 166: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-30

PARTS NO. REMARKS ILLUSTS

YM

BO

LPARTS NO. REMARKS ILLUST

SY

MB

OL

a

b

c

d

e

f

g

h

i

j

k

l

m

n

o

p

XA4-9170-557Self Tap

M1.7-5.5mm (Metal)XA1-7170-307 M1.7-3.0mm (Metal)

XA1-7170-207

XA4-9170-407

M1.7-2.0mm (Metal)

XA1-7170-407 M1.7-4.0mm (Metal)

XA1-7170-257 M1.7-2.5mm (Metal)XA1-3170-507Flat Head Screw

M1.7-5.0mm (Metal)

XA9-1167-000Stepped Screw

M1.4-3.4mm (Metal)

XA4-9170-457Self Tap

M1.7-4.5mm (Metal)

XA4-9170-357Self Tap

M1.7-3.5mm (Metal)

XA9-1349-000Stepped Screw

M1.7-3.8mm (Metal)

XA9-1294-000Stepped Screw

M1.7-4.5mm (Black)

XA4-9170-607Self Tap

M1.7-6.0mm (Metal)

XA4-9170-409Self Tap

M1.7-4.0mm (Black)

Self Tap

M1.7-4.0mm (Metal)

XA9-1481-000

XA9-1482-000

Noji Rock Screw

M1.7-3.0mm (Metal)

Noji Rock Screw

M1.7-4.0mm (Metal)

4.5mm

3mm

2.5mm

6mm

4mm

3.4mm

2mm

3.5mm4mm

4.5mm

5mm

3.8mm

5.5mm

4mm

3mm

4mm

1-30 List of Screws Used

Page 167: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-31

1-31 List of Disassembly Photos

Recorder/Camera Unit

Camera Unit-2

Right Side

Camera Unit-1

Front Cover Unit

Front Side

Page 168: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-32

Rear Cover Unit

Right Cover UnitLeft Cover Unit

Page 169: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-33

2. Adjustment Procedures

2-1 Adjustment Items in Part Replacement

After replacement of major parts, carry out adjustment referring to the table shown below. Note that the following table shows minimumrequired adjustments to be performed after replacing any major part. In case that two or more parts have been replaced or any faultycondition has occurred, take a proper adjustment procedure accordingly.

: Adjustment required

Camera system

Part nameNo. Adjustment item

Lens JACKPCB CCD MAIN

PCBCACPCB

Adjustment setting

2-2 AF section

2-2-1 CZ Automatic Adjustment Product condition

2-2-2 Cam correction (AUTO) Product condition

2-3 IS section

2-3-1 Gyro Offset Adjustment Product condition

2-3-2 Gyro Gain Adjustment Product condition

2-3-3 Virtual EEPROM and Flash Memory Writing Product condition

2-4 Camera section

2-4-1 Iris Adjustment Product condition

2-4-2 WB Adjustment (1) Product condition

2-4-3 Color Balance Adjustment Product condition

2-4-4 WB Adjustment (2) Product condition

2-4-5 WB Adjustment (3) Product condition

2-4-6 Virtual EEPROM and Flash Memory Writing Product condition

2-5 CCD Pixel Missing Compensation Product condition

2-6 Color Balance Check Product condition

Recorder system

Part nameNo. Adjustment item MAIN

PCBCACPCB

DMCIII

Adjustment setting

2-7 Recorder section

2-7-1 Setting for Destination Product condition

2-7-2, 2-7-3 Y LEVEL / C LEVEL Adjustment Product condition

2-7-4 AGC Initial Value Adjustment Product condition

2-7-5 SWP Adjustment Product condition

2-7-6 C. FG Adjustment Product condition

2-7-7 Automatiac Adjustment of Reel FG

2-7-8 Flash Memory Writing

2-7-9 Battery Voltage Drop Adjustment Product condition

DMC III

2-8 Tape Path Adjustment Tape path adjustment setting

Page 170: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-34

2-2 AF Section Adjustment

Note)

(1) The sections 2-2-1 : CZ automatic adjustment and 2-2-2 : Cam correction (AUTO) must be executed consecutively. If they areperformed independently, the sufficient performance cannot be obtained.Also, when section 2-2-1 : CZ automatic adjustment is completed, execute section 2-2-2 : Cam correction (AUTO) must beexecuted immediately without elapse of time. If execute section 2-2-2 : Cam correction (AUTO) is executed after elapse of timeupon completion of section 2-2-1 : CZ automatic adjustment, the sufficient performance cannot be obtained.

(2) The result data (*) of automatic adjustment is indicated in blinking because of the design of the MI-COM system.

Preparation)

(1) For CZ automatic adjustment/cam correction, set the product condition.(2) Adjustment condition (initial condition)

Tape/Card : TapeProgram AE : Auto ModeZOOM : Telephoto-endCZ adjustment chart : 2.4 ± 0.02 m from lens frontChart luminance : 500 lux or more (High illuminance should be avoided at the wide-angle end.)

2-2-1 CZ Automatic Adjustment

CHART CZ adjustment chart

SPEC. At STEP 3, DT : AA should be attained. Execution of STEP 4.

Procedure)

(1) In the telephoto-end setting, bring the center of chart image to the center of monitor TV.(2) Referring to the table shown below, carry out CZ automatic adjustment in the service mode.(3) Perform the cam correction.STEP PROCEDURE Microcomputer operation

CZ CS Function MD ADDR DT1 1) Make the setting shown at right. 2 00 ST 465F 90

2) Perform storing. ↑ ↑ RD ↑ ↑ Move to adjustment mode. (press the PAUSE button.)

2 2) Perform storing. 2 08 ST 3100 00 (press the PAUSE button.) ↑ ↑ ↑ ↑ ↑ Automatic adjustment is started. Then, it is

completed in 30 seconds approximately. If any NGcondition is encountered in automatic adjustment,check the parts inside the lens section.

3 Judgment on result of adjustment 2 08 RD 3100 *AA Adjustment is completed (result is OK).Perform the cam correction.

↑ ↑ RD ↑ *FF Adjustment is completed (result is NG).Take the procedure again from the beginning.

4 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

MONITOR

Page 171: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-35

2-2-2 Cam Correction (AUTO)

CHART CZ adjustment chart

SPEC. Automatic adjustment

Procedure)

(1) Quit the service mode, and turn power OFF/ON.(2) Perform the cam correction by following the table below.(3) Quit the service mode, turn power off/on, and then check that proper focusing can be attained in normal zooming operation (AF

OFF).(4) If the result is NG, perform 2-2-1 : CZ automatic adjustment and 2-2-2 : Cam correction (AUTO).

STEP PROCEDURE Microcomputer operationCAM CORRECTION CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3101 002) Perform storing. ↑ ↑ RD ↑ *01 (press the PAUSE button.)

2

3 1) Make the setting shown at right. 2 08 ST 3202 00

↑ ↑ WR ↑ ↑2) Perform storing. ↑ ↑ RD ↑ *02 Correction value measurement. (press the PAUSE button.) Completion with DT:02.

4 1) Make the setting shown at right. 2 08 ST 3104 002) Perform storing. ↑ ↑ RD ↑ *04 Correction value calculation. (press the PAUSE button.) Completion with DT:04.

5 1) Make the setting shown at right. 2 08 ST 3105 002) Perform storing. ↑ ↑ RD ↑ *AA Completion of correction value writing. (press the PAUSE button.) Completion with DT:AA.

6 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

Cancel the service mode, and set the zoom position to the telephoto end. After focus movement is stopped, turn OFF the AF function.

MONITOR

Page 172: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-36

2-3 IS Section Adjustment

Note)

(1) Perform the IS adjustment after machine is re-assembled to a product status.(2) Prepare a tripod or stable work bench.(3) Each of the adjustment data (2-3-1 and 2) becomes valid when 2-3-3 data writing is made. After completion of each adjustment, be

sure to carry out 2-3-3 before turning power OFF.(4) The result data (*) of automatic adjustment is indicated in blinking because of the design of the MI-COM system.

2-3-1 GYRO OFFSET Adjustment

SPEC. Automatic adjusutment

Procedure)

(1) Wait at least 10 seconds while being careful not to apply vibration to the camera.(2) Referring to the table shown below, perform the automatic adjustment.

Note)

It will take approx. 25 seconds at maximum to complete adjustment (OK) after storing (pressing the pause button).

2-3-2 GYRO GAIN Adjustment

SPEC. Data Writing

Procedure)

(1) Reset the data to be the original, referring to the table shown below.

STEP PROCEDURE Microcomputer operation GYRO OFFSET CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 320D 002) Perform storing. ↑ ↑ RD ↑ *02 Adjustment is completed. (press the PAUSE button.) Completion with DT:02, NG with DT:03

MONITOR

STEP PROCEDURE Microcomputer operation GYRO GAIN CS Function MD ADDR DT

1 Gyro YAW gain adjustment1-1 1) Make the setting shown at right. 2 08 ST 3200 91

2) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment is completed. (press the PAUSE button.)

2 Gyro PITCH gain adjustment2-1 1) Make the setting shown at right. 2 08 ST 3201 75

2) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment is completed. (press the PAUSE button.)

MONITOR

Page 173: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-37

2-3-3 Virtual EEPROM and Flash Memory Writing

SPEC. Automatic writing

Procedure)

(1) According to the table shown below, write adjustment data (2-3-1 and 2) into the virtual EEPROM and flash memory.

STEP PROCEDURE Microcomputer operation EEPROM & FLASH WRITING CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 320F 002) Perform storing. ↑ ↑ RD ↑ *02 Completion of virtual EEPROM writing. (press the PAUSE button.) Completion with DT:02, NG with DT:03

2 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

MONITOR

Page 174: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-38

2-4 Camera Section Adjustment

Notes)

(1) Each adjustment data (2-4-1 to 2-4-5) becomes effective after it is written into the DATA as mentioned in 2-4-6. If power must beturned OFF/ON during each adjustment, be sure to perform the DATA write procedure as mentioned in 2-4-6.

(2) The adjustments from 2-4-2 through 2-4-5 must be carried out in series.(3) The result data (*) of automatic adjustment is indicated in blinking because of the design of the MI-COM system.

Preparation)

(1) For camera section adjustment, take the product condition.(2) Adjustment condition (initial condition)

Tape/Card : TapeProgram AE : Auto ModeAF : OFFImage stabilizer : OFFChart : Standard angle of view (Set the angle after setting the high address.)

2-4-1 Iris Adjustment

CHART Light box (5600°K)

SPEC. Automatic adjustment.

Procedure)

(1) Referring to the table shown below, adjust the Iris.

2-4-2 WB Adjustment (1)

CHART Light box (5600°K)

SPEC. Automatic adjustment

Procedure)

(1) Referring to the table shown below, carry out WB adjustment (1).

Note) In this adjustment, color balance gain data is set to FF. Be sure to carry out color balance adjustment de-scribed in 2-4-3.

STEP PROCEDURE Microcomputer operation IRIS CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3000 002) Perform storing. ↑ ↑ WR ↑ ↑ Adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ *↑ Adjustment is completed.

Completion with DT:00 (In addition, NG)

MONITOR

STEP PROCEDURE Microcomputer operation WB (1) CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3002 002) Perform storing. ↑ ↑ WR ↑ ↑ Adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ *05 Adjustment is completed.

Completion with DT:05 (In addition, NG)

MONITOR

Page 175: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-39

2-4-3 Color Balance Adjustment

CHART Lightbox (5600°K), and color bar chart (white area at the left side)

M.EQ. Vectorscope

TP/TRIG. VIDEO OUT

SPEC. FR 1st microcomputer only R : × 1.7 (ratio to burst) 90°, Ye : × 1.0 (ratio to burst) 202°

FR 2nd microcomputer and subsequent R : × 2.0 (ratio to burst) 90°, Ye : × 1.0 (ratio to burst) 180°

* For the FR 1st computer, the camera program version indication (CA) is “C200”.

* For the FR 2nd computer and subsequent, the camera program version indication (CA) is “1220”.

Procedure)

(1) For manual adjustment of color balance, change data at the following four addresses while observing a vectorscope.

2-4-4 WB Adjustment (2)

CHART Light box (5600°K), and CCA12 filter

SPEC. Automatic adjustment

Procedure)

(1) Referring to the table shown below, carry out WB adjustment (2).

STEP PROCEDURE Microcomputer operation CB (MANUAL) CS Function MD ADDR DT

R-Y GAIN 1) In the setting shown at right, adjust relevant data. 2 08 ST 3007 "ADJ" Adjustment is in progress.2) Perform storing. ↑ ↑ RD ↑ ADJ Adjustment is completed. (press the PAUSE button.)

B-Y GAIN 1) Make the setting shown at right. ↑ ↑ ST 3008 "ADJ" Adjustment is in progress.2) Perform storing. ↑ ↑ RD ↑ ADJ Adjustment is completed. (press the PAUSE button.)

R-Y MAT 1) Make the setting shown at right. ↑ ↑ ST 3009 "ADJ" Adjustment is in progress.2) Perform storing. ↑ ↑ RD ↑ ADJ Adjustment is completed. (press the PAUSE button.)

B-Y MAT 1) Make the setting shown at right. ↑ ↑ ST 300A "ADJ" Adjustment is in progress.2) Perform storing. ↑ ↑ RD ↑ ADJ Adjustment is completed. (press the PAUSE button.)

MONITOR

STEP PROCEDURE Microcomputer operation WB (2) CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3004 002) Perform storing. ↑ ↑ WR ↑ ↑ Adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ *05 Adjustment is completed.

Completion with DT:05 (In addition, NG)

MONITOR

Page 176: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-40

2-4-5 WB Adjustment (3)

CHART Light box (5600°K)

SPEC. Automatic adjustment

Procedure)

(1) Referring to the table shown below, carry out WB adjustment (3).

2-4-6 Virtual EEPROM and Flash Memory Writing

SPEC. Automatic writing

Procedure)

(1) According to the table shown below, write adjustment data (2-4-1 to 2-4-5) into the virtual EEPROM and flash memory.

STEP PROCEDURE Microcomputer operation WB (3) CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3005 002) Perform storing. ↑ ↑ WR ↑ ↑ Adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ *↑ Adjustment is completed.

Completion with DT:00 (In addition, NG)

MONITOR

STEP PROCEDURE Microcomputer operation EEPROM & FLASH WRITING CS Function MD ADDR DT

1 1) Make the setting shown at right. 2 08 ST 3006 002) Perform storing. ↑ ↑ RD ↑ *02 Completion of virtual EEPROM writing. (press the PAUSE button.) Completion with DT:02, NG with DT:03

2 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

MONITOR

Page 177: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-41

2-5 CCD Pixel Missing Compensation

Notes)

(1) Perform this adjustment only if a void pixel is found on the CCD.(2) Before starting this adjustment, turn power on for 30 minutes.(3) In this adjustment, NG is indicated if there are two or more pixel defects at the center of the screen or if there are eight or more pixel

defects on the entire screen.(4) The result data (*) of automatic adjustment is indicated in blinking because of the design of the MI-COM system.

Preparation)

(1) Carry out this correction in the product state.(2) Adjustment Conditions

Program AE : AUTOAF : OFFImage stabilizer : OFFDemo mode : OFF

Procedure)

(1) Perform the CCD void pixel correction (automatic mode) according to the table shown below.STEP PROCEDURE Microcomputer operation

CS Function MD ADDR DT1 CCD void pixel correction1-1 1) Make the setting shown at right. 2 08 ST 300D 00

2) Perform storing. ↑ ↑ WR ↑ ↑ Adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ *-- Adjustment is completed.

Completion with DT:00 to 0C, NG with DT:8*2 Virtual EEPROM writing2-1 1) Make the setting shown at right. 2 08 ST 300E 00

2) Perform storing. ↑ ↑ RD ↑ *02 Completion of virtual EEPROM writing. (press the PAUSE button.) Completion with DT:02, NG with DT:03

3 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

MONITOR

Page 178: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-42

2-6 Color Balance Check

Preparation)

(1) Carry out this correction in the product state.(2) Adjustment Conditions

Program AE : AUTOAF : OFFImage stabilizer : OFFDemo mode : OFF

CHART Lightbox (5600°K), and color bar chart

M.EQ. Vectorscope

TP/TRIG. VIDEO OUT

SPEC. R : × 2.2 101° (± 0.15 ±5°), Ye : × 1.1 173° (± 0.15 ±5°), G : 265° (±5°)

Procedure)

(1) Quit the service mode, and turn power OFF/ON.(2) Perform light-box recording, and carry out WB SET using the relevant function of the product.(3) Take an image of the color bar chart, and check that the levels of R, Ye and G are within the specified ranges respectively.(4) If the result of the above check is NG, carry out camera section adjustment again.

Page 179: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-43

2-7 Recorder Section Adjustment

Note)

(1) Each of the adjustment data (2-7-2 to 2-7-7) becomes valid when 2-7-8 flash memory writing is made. When turning power ON/OFF during each adjustment, be sure to carry out 2-7-8 flash memory writing.

Preparation)

(1) Except for the tape-path adjustment, carry out adjustment in the product state.

2-7-1 Setting for Destination

SPEC. Automatic writing

Procedure)

(1) Referring to the table shown below, carry out the setting for destination market place.

STEP PROCEDURE Microcomputer operation CS Function MD ADDR DT

1 1) Make the setting shown at right. 1 10 ST 0064 F1 All Model2) Perform storing. ↑ ↑ RD ↑ ↑ Data writing (press the PAUSE button.)

2 1) Make the setting shown at right. 1 10 ST 0069 00 DM-MV650i E

↑ ↑ ↑ ↑ 01 DM-MV630i E

↑ ↑ ↑ ↑ 02 DM-MV600i E / DM-MV600 E / DM-MV590 E2) Perform storing. ↑ ↑ RD ↑ ↑ Data writing (press the PAUSE button.)

3 1) Make the setting shown at right. 1 10 ST 0071 00 DM-MV650i E / DM-MV630i E

↑ ↑ ↑ ↑ 01 DM-MV600i E / DM-MV600 E / DM-MV590 E2) Perform storing. ↑ ↑ RD ↑ ↑ Data writing (press the PAUSE button.)

MONITOR

Page 180: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-44

2-7-2 Y LEVEL Adjustment

TP/TRIG. VIDEO OUT

M. EQ. Oscilloscope

SPEC. 980 ± 20 [mV]

Procedure)

(1) Select the card VTR mode.(2) Referring to the table shown below, carry out Y level adjustment.

Repeat steps 2) to 4) so that the level range shown at the rightwill be attained.* If the tape mode is selected, a delay may occur in re-

sponse.

Fig. 4-29

980 ± 20mV

STEP PROCEDURE Microcomputer operationY LEVEL CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 10 ST 000D ADJ White raster is output.2) Change data properly. ↑ ↑ ↑ ↑ "ADJ"3) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment data reflected (press the PAUSE button.)4) Make the setting shown at right. ↑ ↑ ST ↑ ↑ Check level. 5) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment is completed. (press the PAUSE button.)

MONITOR

Page 181: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-45

2-7-3 C LEVEL Adjustment

TP/TRIG. VIDEO OUT

M. EQ. Oscilloscope

SPEC. 700 ± 20 [mV]

Procedure)

(1) Select the card VTR mode.(2) Referring to the table shown below, carry out C level adjustment.

Repeat steps 2) to 4) so that the level range shown at the rightwill be attained.* If the tape mode is selected, a delay may occur in re-

sponse.

2-7-4 AGC Initial Value Adjustment

SIGNAL COLOR BAR

MODE E-E (ANALOG LINE IN)

SPEC. Automatic writing

Procedure)

(1) Input a color bar signal to the analog line circuit from the pattern generator.(2) Carry out AGC initial value adjustment according to the table shown below.

Fig.4-30

700 ± 20mV

STEP PROCEDURE Microcomputer operation AGC INITIAL CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 08 ST 0004 --2) Perform storing. ↑ ↑ WR ↑ ↑ Automatic adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ ↑ Automatic adjustment is completed.

MONITOR

STEP PROCEDURE Microcomputer operationC LEVEL CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 10 ST 000E ADJ Green raster is output.2) For adjustment, change data properly. ↑ ↑ ↑ ↑ "ADJ"3) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment data reflected (press the PAUSE button.)4) Make the setting shown at right. ↑ ↑ ST ↑ ↑ Check level. 5) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment is completed. (press the PAUSE button.)

MONITOR

Page 182: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-46

2-7-5 SWP Adjustment

MODE Playback of color bar master (DY9-1381-000)

SPEC. Automatic adjustment

Procedure)

(1) While playing back the color bar master, carry out SWP automatic adjustment referring to the table shown below.

2-7-6 C. FG Adjustment

MODE Playback of color bar master (DY9-1381-000)

SPEC. Automatic adjustment

Procedure)

(1) While playing back the color bar master, carry out C.FG automatic adjustment referring to the table shown below.

2-7-7 Automatic Adjustment of Reel FG

MODE Stop without VTR cassette

Procedure)

(1) Carry out reel FG adjustment according to the following table.

2-7-8 Flash Memory Writing

SPEC. Memory data writing

Procedure)

(1) Write adjustment data (2-7-1 to 7) into the flash memory according the table shown below.

STEP PROCEDURE MONITOR Microcomputer operationSWP (AUTO) CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 08 ST 0001 --2) Perform storing. ↑ ↑ WR ↑ ↑ Automatic adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ ↑ Automatic adjustment is completed.

STEP PROCEDURE MONITOR Microcomputer operationC.FG(AUTO) CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 08 ST 0003 --2) Perform storing. ↑ ↑ WR ↑ ↑ Automatic adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ ↑ Automatic adjustment is completed.

STEP PROCEDURE MONITOR Microcomputer operationCS Function MD ADDR DT

1 1) Make the setting shown at right. 0 08 ST 0007 --2) Perform storing. ↑ ↑ WR ↑ ↑ Automatic adjustment is in progress. (press the PAUSE button.) ↑ ↑ RD ↑ ↑ Automatic adjustment is completed.

STEP PROCEDURE Microcomputer operation CS Function MD ADDR DT

1 1) Make the setting shown at right. 0 08 ST 0081 00 Preparation for flash memory updating. 2) Perform storing. ↑ ↑ RD ↑ ↑ Execution of flash memory updating. (press the PAUSE button.)

MONITOR

Page 183: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-47

2-7-9 Battery Voltage Drop Adjustment

MODE During camera recording in product condition (AF : OFF, LCD PANEL : ON)

SPEC. Power supply voltage: 5.85 ± 0.02 [V]

Note)

(1) Perform the adjustment after 4sec of recording start.

Procedure)

(1) Under the above condition, set a power supply voltage to 5.85 ± 0.02[V].(2) Referring to the table shown below, carry out battery voltage drop adjustment.

STEP PROCEDURE Microcomputer operationBATTERY VOLTAGE DROP CS Function MD ADDR DT

1 1) Make the setting shown at right. 1 08 ST --2) Perform storing. ↑ ↑ RD ↑ ↑ Adjustment is completed. (press the PAUSE button.)

MONITOR

Page 184: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-48

2-8 Tape Path Adjustment

Note)

(1) For tape path adjustment, the service mode setting is necessary. For the details of setting procedure, refer to the DMC III Section.

Preparation)

(1) For tape path adjustment, make the recorder adjustment setting (P. 3-2, 3).

Procedure)

(1) Referring to the table given below (STEPS 1, 2, 3), play back the tracking master (DY9-1345-000) for tape path adjustment.At STEP 2, perform tracking shift by adjusting DT in a range of F0 to FF so that the RF envelope will be 70%.

(2) After adjustment, restore tracking shift setting to normal according to the following table (STEPS 4 : P.OFF).

STEP PROCEDURE Microcomputer operationTRACKING TAPE CS Function MD ADDR DT

1 1) Play back the tracking tape.2 1) Set up tracking shift .2-1 1) Make the setting shown at right. 0 00 ST 9FE7 F2

2) Perform storing. ↑ ↑ RD ↑ ↑ (press the PAUSE button.)3) Perform 70% tracking shift by ↑ ↑ ST ↑ F0~FF The amount of tracking shift is changed. adjusting DT in a range of F0 to FF.4) Perform storing. ↑ ↑ RD ↑ ↑ (press the PAUSE button.)* DT00 in tracking shift released

3 1) Perform tape path adjustment with the RF envelope in 70% tracking shift state.4 1) Select the normal mode.

2) Turn off power to the main unit.

MONITOR

Page 185: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-49

R-Y

BURST

B-Y

Ye

PAL

DM-MV650i E,DM-MV630i EDM-MV600i E,DM-MV600 EDM-MV590 E

R

R-Y

BURST

B-Y

PAL

DM-MV650i E,DM-MV630i EDM-MV600i E,DM-MV600 EDM-MV590 E

R

Ye

Copy the chart on a transparent film. Trim and attach the transparent chart on a vectorscope display.

Color balance adjustment chartFR 1st MI-COM only

FR 2nd microcomputer and subsequent

Page 186: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 ECHAPTER 4. DISASSEMBLING ADJUSTMENT

4-50

Copy the chart on a transparent film. Trim and attach the transparent chart on a vectorscope display.

R-Y

BURST

B-Y

Color balance adjustment chart

Ye

PAL DM-MV650i E,DM-MV630i EDM-MV600i E,DM-MV600 EDM-MV590 E

R

Page 187: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 5. PARTS LIST

CONTENTS

EXPLODED VIEWSCasing Parts Section ------------------------------------------------------------------------------------------------------------------------ 5-2Front Cover Unit Section ------------------------------------------------------------------------------------------------------------------ 5-4Left Cover Unit Section-1 ----------------------------------------------------------------------------------------------------------------- 5-6Left Cover Unit Section-2 ----------------------------------------------------------------------------------------------------------------- 5-8Right Cover Unit Section-1 --------------------------------------------------------------------------------------------------------------5-10Right Cover Unit Section-2 --------------------------------------------------------------------------------------------------------------5-12LCD Unit Section --------------------------------------------------------------------------------------------------------------------------5-14Rear Cover Unit Section ------------------------------------------------------------------------------------------------------------------5-16CVF Unit Section --------------------------------------------------------------------------------------------------------------------------5-18Recorder Unit Section ---------------------------------------------------------------------------------------------------------------------5-20Camera Unit Section ----------------------------------------------------------------------------------------------------------------------5-22Lens Unit Section --------------------------------------------------------------------------------------------------------------------------5-24Mechanical Chassis Section-1 -----------------------------------------------------------------------------------------------------------5-26Mechanical Chassis Section-2 -----------------------------------------------------------------------------------------------------------5-28Mechanical Chassis Section-3 -----------------------------------------------------------------------------------------------------------5-30Mechanical Chassis Section-4 -----------------------------------------------------------------------------------------------------------5-32Accessory Section-1 -----------------------------------------------------------------------------------------------------------------------5-34Accessory Section-2 -----------------------------------------------------------------------------------------------------------------------5-36

FUSE Replacement Instruction ----------------------------------------------------------------------------------------------------------------5-38ELECTRICAL PARTS LIST ------------------------------------------------------------------------------------------------------------------5-39PARTS LIST -------------------------------------------------------------------------------------------------------------------------------------5-40

Page 188: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-1

1. Especially critical parts in the power circuit block should not be replaced with other marks.Critical parts are marked with in this electrical parts list.

CAUTION

Page 189: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-2

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Casing Parts Section

1×2

1×3

7

1 6

1

1

5

1×2

2×4

1

1

3 5×3

1

8

LEFT COVERUNIT

REAR COVERUNIT

FRONT COVERUNIT

RIGHT COVERUNIT

CAMERA/LENS/RECORDERUNIT

6

5

4

Page 190: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-3

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 XA1-7170-307 000 F 13 SCREW2 XA1-3170-507 000 F 4 SCREW3 DA2-0436-000 000 B 1 SHOE, ACCESSORY4 D52-0220-000 000 B 1 CAP, LENS NEW5 XA4-9170-457 000 F 5 SCREW

6 XA1-7170-407 000 F 2 SCREW7 DA3-0299-000 000 C 1 CUSHION NEW8 DY1-8532-000 000 C 1 PCB ASS’Y, JACK DM-MV650i E NEW

DY1-8534-000 000 C 1 PCB ASS’Y, JACK DM-MV630i E NEWDY1-8535-000 000 C 1 PCB ASS’Y, JACK DM-MV600i E, NEW

DM-MV600 E,MV590 E

Page 191: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-4

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Front Cover Unit Section

4

1 2

6

7

8

3×2

5

3×3

Page 192: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-5

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DA3-0274-000 000 B 1 COVER, L JACK DM-MV650i E,MV630i E NEWDA3-0281-000 000 B 1 COVER, L JACK DM-MV600i E, NEW

DM-MV600 E,MV590 E2 DY1-8537-000 000 B 1 COVER ASS’Y, FRONT DM-MV650i E NEW

DY1-8538-000 000 B 1 COVER ASS’Y, FRONT DM-MV630i E NEW

DY1-8539-000 000 B 1 COVER ASS’Y, FRONT DM-MV600i E, NEWDM-MV600 E,MV590 E

3 XA4-9170-457 000 F 5 SCREW4 DY1-8504-000 000 B 1 LENS RING ASS’Y DM-MV650i E NEW

DY1-8516-000 000 B 1 LENS RING ASS’Y DM-MV630i E NEW

DY1-8521-000 000 B 1 LENS RING ASS’Y DM-MV600i E, NEWDM-MV600 E,MV590 E

5 DY1-8503-000 000 B 1 COVER ASS’Y, F JACK DM-MV650i E NEWDY1-8515-000 000 B 1 COVER ASS’Y, F JACK DM-MV630i E NEWDY1-8520-000 000 B 1 COVER ASS’Y, F JACK DM-MV600i E,MV600 E NEW

DY1-8540-000 000 B 1 COVER ASS’Y, F JACK DM-MV590 E NEW6 DA3-0267-000 000 C 1 SHIELD, MIC NEW7 DF1-5033-000 000 C 1 MIC ASS’Y NEW8 DA3-0265-000 000 C 1 RUBBER, MIC NEW

Page 193: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-6

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Left Cover Unit Section-1

23

1*1

7

8

13

12

10

9

5

6

4

3×2

11×2*1 : DM-MV650i E, DM-MV630i E

ONLY

3×2*1

Page 194: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-7

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DA3-0236-000 000 B 1 KNOB, CHANGE DM-MV650i E,MV630i E NEW2 DA3-0249-000 000 C 1 PLATE, CHANGE DM-MV650i E,MV630i E NEW3 XA4-9170-457 000 F 5(4) SCREW *( )DM-MV600i E,

DM-MV600 E,MV590 E4 DG3-0055-000 000 B 1 OPERATION KEY ASS’Y DM-MV650i E,MV630i E NEW

DG3-0056-000 000 B 1 OPERATION KEY ASS’Y DM-MV600i E, NEWDM-MV600 E,MV590 E

5 XA4-9170-409 000 F 1 SCREW6 WR1-5083-000 000 C 1 SPEAKER7 DA3-0330-000 000 C 1 CUSHION NEW

8 DA3-0248-000 000 C 1 PLATE, C SUPPORT NEW9 DA3-0234-000 000 C 1 PLATE, C LOCK NEW

10 DA3-0186-000 000 C 1 BASE, TRIPOD NEW11 XA1-7170-307 000 F 2 SCREW12 XA4-7170-407 000 F 1 SCREW

13 DA3-0235-000 000 B 1 KNOB, CASSETTE OPEN NEW

Page 195: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-8

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Left Cover Unit Section-2

7×3

2×2

2×2

8

2

5

7

6

9

1

3

4

A

A

Page 196: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-9

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DA3-0240-000 000 C 1 STRAP, HAND NEW2 XA1-7170-257 000 F 5 SCREW3 DA3-0226-000 000 B 1 COVER, CASSETTE NEW4 DA3-0225-000 000 B 1 COVER, LEFT DM-MV650i E NEW

DA3-0294-000 000 B 1 COVER, LEFT DM-MV630i E NEW

DA3-0296-000 000 B 1 COVER, LEFT DM-MV600i E, NEWDM-MV600 E,MV590 E

5 DA3-0239-000 000 C 1 SHAFT, GRIP BELT NEW6 DF1-5005-000 000 C 1 CASSETTE ARM ASS’Y NEW7 XA4-9170-409 000 F 4 SCREW

8 DY1-8502-000 000 C 1 PCB ASS’Y, EJECT NEW9 DA3-0290-000 000 C 1 LABEL, NAME DM-MV650i E NEW

DA3-0291-000 000 C 1 LABEL, NAME DM-MV630i E NEWDA3-0292-000 000 C 1 LABEL, NAME DM-MV600i E NEWDA3-0293-000 000 C 1 LABEL, NAME DM-MV600 E NEW

DA3-0335-000 000 C 1 LABEL, NAME DM-MV590 E NEW

Page 197: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-10

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Right Cover Unit Section-11

2

3

5×2

6×2

4

*1 : DM-MV650i E, DM-MV630i E ONLY

*1

RIGHT COVERUNIT

LCD UNIT

Page 198: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-11

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DA2-1650-000 000 C 1 CUSHION DM-MV650i E,MV630i EDA3-0332-000 000 C 1 CUSHION DM-MV600i E, NEW

DM-MV600 E,MV590 E2 DA3-0185-000 000 B 1 COVER, LI BATT NEW3 DA3-0180-000 000 B 1 COVER, CARD DM-MV650i E,MV630i E NEW

4 DA3-0182-000 000 C 1 SHAFT, CARD COVER DM-MV650i E,MV630i E NEW5 XA1-7170-407 000 F 2 SCREW6 XA4-9170-457 000 F 2 SCREW

Page 199: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-12

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Right Cover Unit Section-2

*1 : DM-MV650i E ONLY*2 : DM-MV650i E, DM-MV630i E ONLY

1×2

2

18

5

5

5

14

6

3

4

2×2

17×4

16

15

17

11

12

13

*1

*2

2×2

89

10

Page 200: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-13

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 XA4-9170-557 000 F 3 SCREW2 XA1-7170-207 000 F 5(4) SCREW *( )DM-MV630i,MV600i E,

DM-MV600 E,MV590 E3 DA3-0181-000 000 C 1 LOCK, CARD COVER DM-MV650i E,MV630i E NEW4 DY1-8533-000 000 C 1 PCB ASS’Y, R-KEY DM-MV650i E NEW

DY1-8536-000 000 C 1 PCB ASS’Y, R-KEY DM-MV630i E, NEWDM-MV600i E,DM-MV600 E,MV590 E

5 XA4-9170-457 000 F 3 SCREW6 DG3-0058-000 000 C 1 BACKLIGHT ASS’Y, R KEY DM-MV650i E NEW

7 DA3-0176-000 000 C 1 HOLDER, LCD LOCK NEW8 DA3-0193-000 000 C 1 SPRING, LCD LIFT NEW9 DA3-0179-000 000 B 1 LIFTER, LCD NEW

10 DA3-0192-000 000 C 1 SPRING, LCD LOCK NEW11 DA3-0175-000 000 C 1 LOCK, LCD NEW

12 DY1-8505-000 000 B 1 COVER ASS’Y, RIGHT DM-MV650i E NEWDY1-8517-000 000 B 1 COVER ASS’Y, RIGHT DM-MV630i E NEWDY1-8522-000 000 B 1 COVER ASS’Y, RIGHT DM-MV600i E, NEW

DM-MV600 E,MV590 E13 DA3-0178-000 000 B 1 KNOB, LCD OPEN NEW

14 DG3-0042-000 000 C 1 PCB ASS’Y, D SW2 NEW15 DA3-0191-000 000 B 1 KNOB, A-P NEW16 DG3-0037-000 000 C 1 PCB ASS’Y, CARD DM-MV650i E,MV630i E NEW

DG3-0049-000 000 C 1 PCB ASS’Y, CARD DM-MV600i E, NEWDM-MV600 E,MV590 E

17 XA4-9170-407 000 F 4 SCREW18 XA4-7170-407 000 F 1 SCREW DM-MV650i E

Page 201: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-14

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

LCD Unit Section

1×3

2 1

3

4

5

10×2

6

7

9

8

Page 202: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-15

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 XA1-7170-307 000 F 4 SCREW2 DA3-0283-000 000 B 1 COVER, LCD TOP DM-MV650i E NEW

DA3-0285-000 000 B 1 COVER, LCD TOP DM-MV630i E NEWDA3-0288-000 000 B 1 COVER, LCD TOP DM-MV600i E NEWDA3-0289-000 000 B 1 COVER, LCD TOP DM-MV600 E NEW

DA3-0334-000 000 B 1 COVER, LCD TOP DM-MV590 E NEW3 DG3-0039-000 000 C 1 PCB ASS’Y, LCD NEW4 DG1-4135-000 000 C 1 BACK LIGHT ASS’Y, LCD

*1 5 WG2-5210-000 000 B 1 LCD ASS’Y*2 DY1-8333-000 000 B 1 LCD ASS’Y

6 DA3-0261-000 000 C 1 HOLDER, LCD NEW7 DA3-0264-000 000 C 1 SHEET, BOTTOM COVER NEW8 DY1-8507-000 000 B 1 HINGE ASS’Y NEW9 DA3-0262-000 000 B 1 COVER, LCD BOTTOM NEW

10 DA2-0399-000 000 C 2 SHEET, LCD

*1 : Same quality as the production line.

*2 : Free from the pixel dot.

Page 203: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-16

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Rear Cover Unit Section

7×4

1

1

3

5

8

6

8

42

CVF Unit

1×3

Page 204: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-17

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 XA4-9170-407 000 F 5 SCREW2 DF1-5006-000 000 C 1 BATTERY TERMINAL ASS’Y NEW3 DA3-0250-000 000 B 1 COVER, REAR NEW4 DY1-8514-000 000 C 1 PCB ASS’Y, DC NEW5 DA3-0251-000 000 B 1 LEVER, BATTERY EJECT NEW

6 DA3-0256-000 000 C 1 SPRING NEW7 XA9-1481-000 000 F 4 SCREW NEW8 XA9-1482-000 000 F 2 SCREW NEW

Page 205: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-18

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CVF Unit Section

1 2

6

7

89

1011

12

17

17×2

18

19

13

14

15

16

3

5

4×2

4×2

A

A

Page 206: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-19

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DA3-0215-000 000 B 1 COVER, DUST DM-MV650i E,MV630i E NEWDA3-0223-000 000 B 1 COVER, DUST DM-MV600i E, NEW

DM-MV600 E,MV590 E2 DA3-0206-000 000 B 1 COVER, CVF TOP DM-MV650i E,MV630i E NEW

DA3-0221-000 000 B 1 COVER, CVF TOP DM-MV600i E, NEW

DM-MV600 E,MV590 E3 DG3-0057-000 000 C 1 HINGE ASS’Y, CVF NEW4 XA1-7170-307 000 F 4 SCREW5 DA3-0207-000 000 B 1 COVER, CVF BOTTOM DM-MV650i E,MV630i E NEW

DA3-0222-000 000 B 1 COVER, CVF BOTTOM DM-MV600i E, NEW

DM-MV600 E,MV590 E6 DH2-5022-000 000 C 1 FPC, CVF-CAC NEW7 DG3-0038-000 000 C 1 PCB ASS’Y, CVF NEW8 DA3-0218-000 000 C 1 REFLECTOR, CVF NEW9 DA3-0217-000 000 C 1 CUSHION, CVF PANEL NEW

10 DA3-0219-000 000 C 1 DIFFUSER, CVF NEW11 WG2-5241-000 000 C 1 LCD ASS’Y, CVF12 DA3-0216-000 000 C 1 PLATE, MASK NEW13 DA3-0208-000 000 B 1 COVER, CVF INNER NEW14 YN1-3111-000 000 C 1 LENS, EYEPIECE NEW

15 DA3-0211-000 000 C 1 HOLDER, CVF LENS NEW16 DA3-0212-000 000 C 1 RUBBER, EYE PIECE NEW17 XA4-9170-457 000 F 3 SCREW18 DA3-0210-000 000 C 1 KNOB, CVF NEW19 DA2-1840-000 000 C 1 RUBBER, CVF KNOB

Page 207: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-20

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Recorder Unit Section

CAMERA/LENSUNIT

12×2

4×35

6×3

12×3

7

9

11

10

8

32

1

12

Page 208: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-21

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DY1-8499-000 000 C 1 RECORDER UNIT, DMC III2 DA1-9903-000 000 C 1 LABEL, S CHASSIS3 DA3-0160-000 000 C 1 HOLDER, RECORDER NEW4 DA1-9779-000 000 C 3 RUBBER, INSULATION5 DA2-0314-000 000 C 1 SPRING, PLATE

6 XA9-1167-000 000 F 3 SCREW7 DA3-0161-000 000 C 1 SHIELD CASE, HA NEW8 DA3-0162-000 000 C 1 SHIELD CASE, PM 1 NEW9 DY1-8511-000 000 C 1 PCB ASS’Y, MAIN DM-MV650i E NEW

DY1-8519-000 000 C 1 PCB ASS’Y, MAIN DM-MV630i E NEW

DY1-8526-000 000 C 1 PCB ASS’Y, MAIN DM-MV600i E NEWDY1-8525-000 000 C 1 PCB ASS’Y, MAIN DM-MV600 E,MV590 E NEW

10 DA3-0163-000 000 C 1 SHIELD CASE, PM 2 NEW11 DY1-8513-000 000 C 1 PCB ASS’Y, CAC12 XA1-7170-307 000 F 6 SCREW

Page 209: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-22

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Camera Unit Section

LENSUNIT

*1, 2 : DM-MV650i E ONLY

64

3

1

1

2

7

8

10×2

111213

5

*1

*2

15×3

14×3

9

Page 210: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-23

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DG1-7296-000 000 C 1 SHOE CONNECTOR ASS’Y DM-MV650i EDA2-1645-000 000 C 1 SPACER, SHOE DM-MV630i E,MV600i E,

DM-MV600 E,MV590 E2 XA9-1349-000 000 F 1 SCREW3 DA2-1622-000 000 C 1 RUBBER, INSULATION

4 DH2-5026-000 000 C 1 FPC, AAS-CAC DM-MV650i E NEW5 DA2-1641-000 000 C 1 RUBBER, LENS6 DH9-0877-000 000 B 1 FILTER, IR NEW7 DA2-1526-000 000 C 1 RUBBER, INSULATION8 DY1-8509-000 000 B 1 CCD ASS’Y NEW

9 DG3-0043-000 000 C 1 PCB ASS’Y, CCD NEW10 XA4-9170-607 000 F 2 SCREW11 DH2-5025-000 000 C 1 FPC, CCD-CAC NEW12 DA3-0165-000 000 C 1 CUSHION, CCD NEW13 DA3-0164-000 000 C 1 SHEET, SHIELD NEW

14 DA2-1524-000 000 C 3 RUBBER, INSULATION15 XA9-1294-000 000 F 3 SCREW

Page 211: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-24

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Lens Unit Section

(3)

(2)

10

(4)

(5)

(7)

(9)

(8)

(7)

(8)

(1)×3

(6)×2

(6)×2

Page 212: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-25

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 XA4-9170-607 000 F 3 SCREW2 YH8-0122-000 000 C 1 IG METER UNIT NEW3 YG9-6000-000 000 C 1 SHAFT, PZ4 YG9-5999-000 000 C 1 SHAFT, AF5 YG1-0154-000 000 C 1 MOTOR, AF

6 XA4-9170-457 000 F 4 SCREW7 YG9-6001-000 000 C 2 PHOTO, INTERRUPTER8 XA4-9170-357 000 F 2 SCREW9 YG1-0153-000 000 C 1 MOTOR, PZ

10 DG1-4518-000 000 B 1 LENS ASS’Y NEW

Page 213: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-26

DMC III

Mechanical Chassis Section-1

13

9

5

7

8

6

4

2

3×3

Page 214: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-27

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DMC III

1 DG1-4506-000 000 B 1 COMPARTMENT ASS’Y, CASSETTE NEW2 XA1-7140-147 000 C 1 SCREW, CROSS-RECESS, PH3 DA2-2138-000 000 C 4 SCREW NEW4 DY1-8500-000 000 E 1 DRUM ASS’Y NEW5 DA2-2139-000 000 C 1 WASHER NEW

6 DF1-1703-000 000 C 1 IDLER ASS’Y NEW7 DA2-2116-000 000 C 1 SPRING, COIL (DRUM) NEW8 DA2-2115-000 000 C 1 SCREW NEW9 DY1-8501-000 000 B 1 CHASSIS ASS’Y, SLIDE NEW

Page 215: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-28

DMC III

Mechanical Chassis Section-21

23

4

5

6

7

8

6

1

9

10

13

11

12

Page 216: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-29

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DMC III

1 DA2-0645-000 000 C 2 WASHER2 DG1-4504-000 000 C 1 REEL ASS’Y, S NEW3 DS1-0193-000 000 C 1 SPRING, COIL (TENSION) NEW4 DF1-1693-000 000 C 1 BRAKE ASS’Y, TENSION NEW5 DF1-1694-000 000 C 1 RELEASE ASS’Y, TENSION NEW

6 DA2-2139-000 000 C 2 WASHER NEW7 DF1-1704-000 000 C 1 BRAKE ASS’Y, S NEW8 DS1-0199-000 000 C 1 SPRING, COIL (S BRAKE) NEW9 DG1-4505-000 000 C 1 REEL ASS’Y, T NEW

10 DA2-2220-000 000 C 1 LEVER, EJECT NEW

11 DA2-2238-000 000 C 1 BRAKE, MAIN T NEW12 DS1-0198-000 000 C 1 SPRING, COIL (T BRAKE) NEW13 DF1-1695-000 000 C 1 REVIEW ARM ASS’Y NEW

Page 217: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-30

DMC III

Mechanical Chassis Section-3

2×2

2×2

2×3

38

9

210

11

12

13

(4)

(6)

(7)

(5)1

Page 218: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-31

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DMC III

1 DG1-4502-000 000 C 1 MOTOR ASS’Y, LOADING NEW2 DA2-2261-000 000 C 8 SCREW NEW3 DG1-4497-000 000 C 1 GUIDE RAIL ASS’Y NEW4 DF1-1687-000 000 C 1 ROLLER ASS’Y, GUIDE S NEW5 DF1-1688-000 000 C 1 ROLLER ASS’Y, GUIDE T NEW

6 DA2-0780-000 000 C 1 SCREW7 DF1-1686-000 000 C 1 DRUM BASE ASS’Y NEW8 DA2-2259-000 000 C 1 SCREW NEW9 DG1-4503-000 000 C 1 MOTOR ASS’Y, CAPSTAN NEW

10 XA1-7140-147 000 C 1 SCREW, CROSS-RECESS, PH

11 DG1-4500-000 000 C 1 ROLLER ASS’Y, PINCH NEW12 DA2-2139-000 000 C 1 WASHER NEW13 DS1-0192-000 000 C 1 SPRING, COIL (PINCH) NEW

Page 219: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-32

DMC III

Mechanical Chassis Section-41

3

4

5

8

9

6

10

7

2

Page 220: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-33

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DMC III

1 DA2-2191-000 000 C 1 LEVER, CAM NEW2 XA1-7140-147 000 C 1 SCREW, CROSS-RECESS, PH3 DA2-2196-000 000 C 1 BELT, TIMING NEW4 DA2-2197-000 000 C 1 GEAR, PULLEY NEW5 DA2-2190-000 000 C 1 GEAR, CONNECT NEW

6 DA2-2140-000 000 C 1 WASHER NEW7 DA2-2188-000 000 C 1 GEAR, WHEEL NEW8 DA2-2139-000 000 C 1 WASHER NEW9 DA2-2195-000 000 C 1 GEAR, CAPSTAN NEW

10 DG1-4501-000 000 C 1 CHASSIS ASS’Y, MAIN NEW

Page 221: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-34

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

PLUG TYPE

AJPN

E

BAS

4

BP-511/512/522/535

DM-MV650i EONLY

WL-D79AWL-D80A, E

53

N.S. (Product available)

WIDE ATTACHMENT

(6)(7)

2

1

CG-570N.S. (Product available)

CB-570N.S. (Product available)

CA-570N.S. (Product available)

SDC-8MN.S. (Commercially availabel.Make copy sample pictures if necessary.)

Accessory Section-1

Page 222: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-35

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DY1-8531-000 000 C 1 DC CABLE2 D82-0643-000 000 C 1 CORD, AC(E) PLUG TYPE E

D82-0644-000 000 C 1 CORD, AC(B) PLUG TYPE BD82-0645-000 000 C 1 CORD, AC(AS) PLUG TYPE AS

3 D55-0170-000 000 C 1 WIDE ATTACHMENT DM-MV650i E

4 DY1-8242-000 000 C 1 COVER, TERMINAL BP-511(BROWN) BP-511/512DY1-8303-000 000 C 1 COVER, TERMINAL BP-522(GRAY) BP-522/535

5 D83-0622-000 000 C 1 WL-79A WIRELESS CONTROLLER DM-MV650i E,DM-MV630i E

D83-0652-000 000 C 1 WL-80A WIRELESS CONTROLLER DM-MV600i E

D83-0653-000 000 C 1 WL-80E WIRELESS CONTROLLER DM-MV600 E,DM-MV590 E

6 DY1-8528-000 000 C 1 COVER, BATTERY WL-D79ADY1-8121-000 000 C 1 COVER, BATTERY WL-D80A,WL-D80E

7 DY1-8530-000 000 C 1 LABEL, WIRELESS CONTROLLER(A) WL-D79A

DY1-8119-000 000 C 1 LABEL, WIRELESS CONTROLLER(A) WL-D80A,WL-D80E

Page 223: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-36

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

6

PC-A10

SS-800

7

WD-30.5

TL-30.5

2

1

DM-50N.S. (Product available) N.S. (Product available)

N.S. (Product available)

5

4

5

4

3

VL-3N.S. (Product available) N.S. (Product available)

FS-30.5N.S. (Product available)

IFC-300PCU

Accessory Section-2

Page 224: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-37

MECHANICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

1 DY1-8246-000 000 C 1 WIND SCREEN, FRONT2 DY1-8247-000 000 C 1 WIND SCREEN, REAR3 DY1-8245-000 000 E 1 LAMP, HAROGEN4 DY4-4764-000 000 C 1 CAP, CONVERTER(FRONT)5 DY4-4765-000 000 C 1 CAP, CONVERTER(REAR)

6 D81-1430-000 000 C 1 SHOULDER STRAP SS-8007 DY4-3338-000 000 C 1 CONNECTOR, SCART PC-A10

Page 225: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-38

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

FUSE Replacement Instruction

CAUTION - For continued protection against risk of fire, replace FU1801, FU3201, FU3204, FU3205only with same type : 494001 1.0A-50V FUSE and replace FU3202, FU3203 only sametype : 49401.5 1.5A-50V FUSE MANUFACTURER : LITTELFUSE.

CN891

CN303 CN302CN300

CN301

CN102CN101

CN100

CN3202

CN3201

CN2000

CN2101

IC300IC301

IC102

IC103

IC3204

IC100

IC1802

IC2100CN990

CN2900

CN1101

CN2501

MAIN P.C.B.

FU3205

FU1801

FU3201

FU3202

FU3204

FU3203

Page 226: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-39

ELECTRICAL PARTS

SYMBOL PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

MAIN P.C.B ASS’YCN100 VS1-6596-033 000 C 1 CONNECTOR 33pCN101 VS1-5988-010 000 C 1 CONNECTOR 10p NEWCN300 VS1-5817-011 000 C 1 CONNECTOR 11pCN302 VS1-7005-018 000 C 1 CONNECTOR 18p NEW

CN303 VS1-6851-021 000 C 1 CONNECTOR 21pCN891 VS1-5988-009 000 C 1 CONNECTOR 9p NEW

CN2101 VS1-6851-039 000 C 1 CONNECTOR 39pCN2501 WS1-6098-000 000 C 1 CONNECTOR, DV NEWFU1801 VD7-2241-001 000 C 1 CHIP FUSE

FU3201 VD7-2241-001 000 C 1 CHIP FUSEFU3202 VD7-2241-501 000 C 1 CHIP FUSEFU3203 VD7-2241-501 000 C 1 CHIP FUSEFU3204 VD7-2241-001 000 C 1 CHIP FUSEFU3205 VD7-2241-001 000 C 1 CHIP FUSE

CAC P.C.B ASS’YCN1001 VS1-6228-015 000 C 1 CONNECTOR 15p NEWCN1201 VS1-6851-021 000 C 1 CONNECTOR 21pCN1501 VS1-6851-023 000 C 1 CONNECTOR 23p

JACK P.C.B ASS’YCN1 WS1-5716-000 000 C 1 JACK, MICCN2 WS1-5524-000 000 C 1 JACK, MINI AVCN3 WS1-6004-000 000 C 1 JACK, USBCN4 WS1-6104-000 000 C 1 JACK, S-VIDEO NEW

CN7 VS1-6851-039 000 C 1 CONNECTOR 39p

Page 227: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-40

PARTS LIST

PAGE PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

3 D52-0220-000 000 B 1 CAP, LENS NEW35 D55-0170-000 000 C 1 WIDE ATTACHMENT DM-MV650i E37 D81-1430-000 000 C 1 SHOULDER STRAP SS-80035 D82-0643-000 000 C 1 CORD, AC(E) PLUG TYPE E35 D82-0644-000 000 C 1 CORD, AC(B) PLUG TYPE B

35 D82-0645-000 000 C 1 CORD, AC(AS) PLUG TYPE AS35 D83-0622-000 000 C 1 WL-79A WIRELESS CONTROLLER DM-MV650i E,DM-MV630i E35 D83-0652-000 000 C 1 WL-80A WIRELESS CONTROLLER DM-MV600i E35 D83-0653-000 000 C 1 WL-80E WIRELESS CONTROLLER DM-MV600 E,DM-MV590 E21 DA1-9779-000 000 C 3 RUBBER, INSULATION

21 DA1-9903-000 000 C 1 LABEL, S CHASSIS21 DA2-0314-000 000 C 1 SPRING, PLATE15 DA2-0399-000 000 C 2 SHEET, LCD3 DA2-0436-000 000 B 1 SHOE, ACCESSORY

29 DA2-0645-000 000 C 2 WASHER

31 DA2-0780-000 000 C 1 SCREW23 DA2-1524-000 000 C 3 RUBBER, INSULATION23 DA2-1526-000 000 C 1 RUBBER, INSULATION23 DA2-1622-000 000 C 1 RUBBER, INSULATION23 DA2-1641-000 000 C 1 RUBBER, LENS

23 DA2-1645-000 000 C 1 SPACER, SHOE DM-MV630i E,MV600i E,DM-MV600 E,MV590 E

11 DA2-1650-000 000 C 1 CUSHION DM-MV650i E,MV630i E19 DA2-1840-000 000 C 1 RUBBER, CVF KNOB27 DA2-2115-000 000 C 1 SCREW NEW

27 DA2-2116-000 000 C 1 SPRING, COIL (DRUM) NEW27 DA2-2138-000 000 C 4 SCREW NEW

27,29,31,33 DA2-2139-000 000 C 5 WASHER NEW33 DA2-2140-000 000 C 1 WASHER NEW33 DA2-2188-000 000 C 1 GEAR, WHEEL NEW

33 DA2-2190-000 000 C 1 GEAR, CONNECT NEW33 DA2-2191-000 000 C 1 LEVER, CAM NEW33 DA2-2195-000 000 C 1 GEAR, CAPSTAN NEW33 DA2-2196-000 000 C 1 BELT, TIMING NEW33 DA2-2197-000 000 C 1 GEAR, PULLEY NEW

29 DA2-2220-000 000 C 1 LEVER, EJECT NEW29 DA2-2238-000 000 C 1 BRAKE, MAIN T NEW31 DA2-2259-000 000 C 1 SCREW NEW31 DA2-2261-000 000 C 8 SCREW NEW21 DA3-0160-000 000 C 1 HOLDER, RECORDER NEW

21 DA3-0161-000 000 C 1 SHIELD CASE, HA NEW21 DA3-0162-000 000 C 1 SHIELD CASE, PM 1 NEW21 DA3-0163-000 000 C 1 SHIELD CASE, PM 2 NEW23 DA3-0164-000 000 C 1 SHEET, SHIELD NEW23 DA3-0165-000 000 C 1 CUSHION, CCD NEW

13 DA3-0175-000 000 C 1 LOCK, LCD NEW13 DA3-0176-000 000 C 1 HOLDER, LCD LOCK NEW13 DA3-0178-000 000 B 1 KNOB, LCD OPEN NEW13 DA3-0179-000 000 B 1 LIFTER, LCD NEW11 DA3-0180-000 000 B 1 COVER, CARD DM-MV650i E,MV630i E NEW

13 DA3-0181-000 000 C 1 LOCK, CARD COVER DM-MV650i E,MV630i E NEW11 DA3-0182-000 000 C 1 SHAFT, CARD COVER DM-MV650i E,MV630i E NEW11 DA3-0185-000 000 B 1 COVER, LI BATT NEW7 DA3-0186-000 000 C 1 BASE, TRIPOD NEW

13 DA3-0191-000 000 B 1 KNOB, A-P NEW

13 DA3-0192-000 000 C 1 SPRING, LCD LOCK NEW13 DA3-0193-000 000 C 1 SPRING, LCD LIFT NEW19 DA3-0206-000 000 B 1 COVER, CVF TOP DM-MV650i E,MV630i E NEW19 DA3-0207-000 000 B 1 COVER, CVF BOTTOM DM-MV650i E,MV630i E NEW19 DA3-0208-000 000 B 1 COVER, CVF INNER NEW

Page 228: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-41

PARTS LIST

PAGE PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

19 DA3-0210-000 000 C 1 KNOB, CVF NEW19 DA3-0211-000 000 C 1 HOLDER, CVF LENS NEW19 DA3-0212-000 000 C 1 RUBBER, EYE PIECE NEW19 DA3-0215-000 000 B 1 COVER, DUST DM-MV650i E,MV630i E NEW19 DA3-0216-000 000 C 1 PLATE, MASK NEW

19 DA3-0217-000 000 C 1 CUSHION, CVF PANEL NEW19 DA3-0218-000 000 C 1 REFLECTOR, CVF NEW19 DA3-0219-000 000 C 1 DIFFUSER, CVF NEW19 DA3-0221-000 000 B 1 COVER, CVF TOP DM-MV600i E, NEW

DM-MV600 E,MV590 E

19 DA3-0222-000 000 B 1 COVER, CVF BOTTOM DM-MV600i E, NEWDM-MV600 E,MV590 E

19 DA3-0223-000 000 B 1 COVER, DUST DM-MV600i E, NEWDM-MV600 E,MV590 E

9 DA3-0225-000 000 B 1 COVER, LEFT DM-MV650i E NEW

9 DA3-0226-000 000 B 1 COVER, CASSETTE NEW7 DA3-0234-000 000 C 1 PLATE, C LOCK NEW7 DA3-0235-000 000 B 1 KNOB, CASSETTE OPEN NEW7 DA3-0236-000 000 B 1 KNOB, CHANGE DM-MV650i E,MV630i E NEW9 DA3-0239-000 000 C 1 SHAFT, GRIP BELT NEW

9 DA3-0240-000 000 C 1 STRAP, HAND NEW7 DA3-0248-000 000 C 1 PLATE, C SUPPORT NEW7 DA3-0249-000 000 C 1 PLATE, CHANGE DM-MV650i E,MV630i E NEW

17 DA3-0250-000 000 B 1 COVER, REAR NEW17 DA3-0251-000 000 B 1 LEVER, BATTERY EJECT NEW

17 DA3-0256-000 000 C 1 SPRING NEW15 DA3-0261-000 000 C 1 HOLDER, LCD NEW15 DA3-0262-000 000 B 1 COVER, LCD BOTTOM NEW15 DA3-0264-000 000 C 1 SHEET, BOTTOM COVER NEW5 DA3-0265-000 000 C 1 RUBBER, MIC NEW

5 DA3-0267-000 000 C 1 SHIELD, MIC NEW5 DA3-0274-000 000 B 1 COVER, L JACK DM-MV650i E,MV630i E NEW5 DA3-0281-000 000 B 1 COVER, L JACK DM-MV600i E, NEW

DM-MV600 E,MV590 E15 DA3-0283-000 000 B 1 COVER, LCD TOP DM-MV650i E NEW

15 DA3-0285-000 000 B 1 COVER, LCD TOP DM-MV630i E NEW15 DA3-0288-000 000 B 1 COVER, LCD TOP DM-MV600i E NEW15 DA3-0289-000 000 B 1 COVER, LCD TOP DM-MV600 E NEW9 DA3-0290-000 000 C 1 LABEL, NAME DM-MV650i E NEW9 DA3-0291-000 000 C 1 LABEL, NAME DM-MV630i E NEW

9 DA3-0292-000 000 C 1 LABEL, NAME DM-MV600i E NEW9 DA3-0293-000 000 C 1 LABEL, NAME DM-MV600 E NEW9 DA3-0294-000 000 B 1 COVER, LEFT DM-MV630i E NEW9 DA3-0296-000 000 B 1 COVER, LEFT DM-MV600i E, NEW

DM-MV600 E,MV590 E

3 DA3-0299-000 000 C 1 CUSHION NEW7 DA3-0330-000 000 C 1 CUSHION NEW

11 DA3-0332-000 000 C 1 CUSHION DM-MV600i E, NEWDM-MV600 E,MV590 E

15 DA3-0334-000 000 B 1 COVER, LCD TOP DM-MV590 E NEW

9 DA3-0335-000 000 C 1 LABEL, NAME DM-MV590 E NEW31 DF1-1686-000 000 C 1 DRUM BASE ASS’Y NEW31 DF1-1687-000 000 C 1 ROLLER ASS’Y, GUIDE S NEW31 DF1-1688-000 000 C 1 ROLLER ASS’Y, GUIDE T NEW29 DF1-1693-000 000 C 1 BRAKE ASS’Y, TENSION NEW

29 DF1-1694-000 000 C 1 RELEASE ASS’Y, TENSION NEW29 DF1-1695-000 000 C 1 REVIEW ARM ASS’Y NEW27 DF1-1703-000 000 C 1 IDLER ASS’Y NEW29 DF1-1704-000 000 C 1 BRAKE ASS’Y, S NEW9 DF1-5005-000 000 C 1 CASSETTE ARM ASS’Y NEW

Page 229: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-42

PARTS LIST

PAGE PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

17 DF1-5006-000 000 C 1 BATTERY TERMINAL ASS’Y NEW5 DF1-5033-000 000 C 1 MIC ASS’Y NEW

15 DG1-4135-000 000 C 1 BACK LIGHT ASS’Y, LCD31 DG1-4497-000 000 C 1 GUIDE RAIL ASS’Y NEW31 DG1-4500-000 000 C 1 ROLLER ASS’Y, PINCH NEW

33 DG1-4501-000 000 C 1 CHASSIS ASS’Y, MAIN NEW31 DG1-4502-000 000 C 1 MOTOR ASS’Y, LOADING NEW31 DG1-4503-000 000 C 1 MOTOR ASS’Y, CAPSTAN NEW29 DG1-4504-000 000 C 1 REEL ASS’Y, S NEW29 DG1-4505-000 000 C 1 REEL ASS’Y, T NEW

27 DG1-4506-000 000 B 1 COMPARTMENT ASS’Y, CASSETTE NEW25 DG1-4518-000 000 B 1 LENS ASS’Y NEW23 DG1-7296-000 000 C 1 SHOE CONNECTOR ASS’Y DM-MV650i E13 DG3-0037-000 000 C 1 PCB ASS’Y, CARD DM-MV650i E,MV630i E NEW19 DG3-0038-000 000 C 1 PCB ASS’Y, CVF NEW

15 DG3-0039-000 000 C 1 PCB ASS’Y, LCD NEW13 DG3-0042-000 000 C 1 PCB ASS’Y, D SW2 NEW23 DG3-0043-000 000 C 1 PCB ASS’Y, CCD NEW13 DG3-0049-000 000 C 1 PCB ASS’Y, CARD DM-MV600i E, NEW

DM-MV600 E,MV590 E

7 DG3-0055-000 000 B 1 OPERATION KEY ASS’Y DM-MV650i E,MV630i E NEW7 DG3-0056-000 000 B 1 OPERATION KEY ASS’Y DM-MV600i E, NEW

DM-MV600 E,MV590 E19 DG3-0057-000 000 C 1 HINGE ASS’Y, CVF NEW13 DG3-0058-000 000 C 1 BACKLIGHT ASS’Y, R KEY DM-MV650i E NEW

19 DH2-5022-000 000 C 1 FPC, CVF-CAC NEW23 DH2-5025-000 000 C 1 FPC, CCD-CAC NEW23 DH2-5026-000 000 C 1 FPC, AAS-CAC DM-MV650i E NEW23 DH9-0877-000 000 B 1 FILTER, IR NEW31 DS1-0192-000 000 C 1 SPRING, COIL (PINCH) NEW

29 DS1-0193-000 000 C 1 SPRING, COIL (TENSION) NEW29 DS1-0198-000 000 C 1 SPRING, COIL (T BRAKE) NEW29 DS1-0199-000 000 C 1 SPRING, COIL (S BRAKE) NEW35 DY1-8119-000 000 C 1 LABEL, WIRELESS CONTROLLER(A) WL-D80A,WL-D80E35 DY1-8121-000 000 C 1 COVER, BATTERY WL-D80A,WL-D80E

35 DY1-8242-000 000 C 1 COVER, TERMINAL BP-511(BROWN) BP-511/51237 DY1-8245-000 000 E 1 LAMP, HAROGEN37 DY1-8246-000 000 C 1 WIND SCREEN, FRONT37 DY1-8247-000 000 C 1 WIND SCREEN, REAR35 DY1-8303-000 000 C 1 COVER, TERMINAL BP-522(GRAY) BP-522/535

*2 15 DY1-8333-000 000 B 1 LCD ASS’Y21 DY1-8499-000 000 C 1 RECORDER UNIT, DMC III

27 DY1-8500-000 000 E 1 DRUM ASS’Y NEW27 DY1-8501-000 000 B 1 CHASSIS ASS’Y, SLIDE NEW

9 DY1-8502-000 000 C 1 PCB ASS’Y, EJECT NEW5 DY1-8503-000 000 B 1 COVER ASS’Y, F JACK DM-MV650i E NEW5 DY1-8504-000 000 B 1 LENS RING ASS’Y DM-MV650i E NEW

13 DY1-8505-000 000 B 1 COVER ASS’Y, RIGHT DM-MV650i E NEW15 DY1-8507-000 000 B 1 HINGE ASS’Y NEW

23 DY1-8509-000 000 B 1 CCD ASS’Y NEW21 DY1-8511-000 000 C 1 PCB ASS’Y, MAIN DM-MV650i E NEW21 DY1-8513-000 000 C 1 PCB ASS’Y, CAC17 DY1-8514-000 000 C 1 PCB ASS’Y, DC NEW5 DY1-8515-000 000 B 1 COVER ASS’Y, F JACK DM-MV630i E NEW

5 DY1-8516-000 000 B 1 LENS RING ASS’Y DM-MV630i E NEW13 DY1-8517-000 000 B 1 COVER ASS’Y, RIGHT DM-MV630i E NEW21 DY1-8519-000 000 C 1 PCB ASS’Y, MAIN DM-MV630i E NEW5 DY1-8520-000 000 B 1 COVER ASS’Y, F JACK DM-MV600i E,MV600 E NEW

Page 230: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-43

PARTS LIST

PAGE PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

5 DY1-8521-000 000 B 1 LENS RING ASS’Y DM-MV600i E, NEWDM-MV600 E,MV590 E

13 DY1-8522-000 000 B 1 COVER ASS’Y, RIGHT DM-MV600i E, NEWDM-MV600 E,MV590 E

21 DY1-8525-000 000 C 1 PCB ASS’Y, MAIN DM-MV600 E,MV590 E NEW

21 DY1-8526-000 000 C 1 PCB ASS’Y, MAIN DM-MV600i E NEW35 DY1-8528-000 000 C 1 COVER, BATTERY WL-D79A35 DY1-8530-000 000 C 1 LABEL, WIRELESS CONTROLLER(A) WL-D79A35 DY1-8531-000 000 C 1 DC CABLE3 DY1-8532-000 000 C 1 PCB ASS’Y, JACK DM-MV650i E NEW

13 DY1-8533-000 000 C 1 PCB ASS’Y, R-KEY DM-MV650i E NEW3 DY1-8534-000 000 C 1 PCB ASS’Y, JACK DM-MV630i E NEW3 DY1-8535-000 000 C 1 PCB ASS’Y, JACK DM-MV600i E, NEW

DM-MV600 E,MV590 E13 DY1-8536-000 000 C 1 PCB ASS’Y, R-KEY DM-MV630i E, NEW

DM-MV600i E,DM-MV600 E,MV590 E

5 DY1-8537-000 000 B 1 COVER ASS’Y, FRONT DM-MV650i E NEW5 DY1-8538-000 000 B 1 COVER ASS’Y, FRONT DM-MV630i E NEW5 DY1-8539-000 000 B 1 COVER ASS’Y, FRONT DM-MV600i E, NEW

DM-MV600 E,MV590 E5 DY1-8540-000 000 B 1 COVER ASS’Y, F JACK DM-MV590 E NEW

37 DY4-3338-000 000 C 1 CONNECTOR, SCART PC-A1037 DY4-4764-000 000 C 1 CAP, CONVERTER(FRONT)37 DY4-4765-000 000 C 1 CAP, CONVERTER(REAR)

VD7-2241-001 000 C 4 CHIP FUSEVD7-2241-501 000 C 2 CHIP FUSEVS1-5817-011 000 C 1 CONNECTOR 11pVS1-5988-009 000 C 1 CONNECTOR 9p NEWVS1-5988-010 000 C 1 CONNECTOR 10p NEW

VS1-6228-015 000 C 1 CONNECTOR 15p NEWVS1-6596-033 000 C 1 CONNECTOR 33pVS1-6851-021 000 C 2 CONNECTOR 21pVS1-6851-023 000 C 1 CONNECTOR 23pVS1-6851-039 000 C 2 CONNECTOR 39p

VS1-7005-018 000 C 1 CONNECTOR 18p NEW*1 15 WG2-5210-000 000 B 1 LCD ASS’Y

19 WG2-5241-000 000 C 1 LCD ASS’Y, CVF7 WR1-5083-000 000 C 1 SPEAKER

WS1-5524-000 000 C 1 JACK, MINI AV

WS1-5716-000 000 C 1 JACK, MICWS1-6004-000 000 C 1 JACK, USBWS1-6098-000 000 C 1 CONNECTOR, DV NEWWS1-6104-000 000 C 1 JACK, S-VIDEO NEW

3 XA1-3170-507 000 F 4 SCREW

27,31,33 XA1-7140-147 000 C 3 SCREW, CROSS-RECESS, PH13 XA1-7170-207 000 F 5(4) SCREW *( )DM-MV630i,MV600i E,

DM-MV600 E,MV590 E9 XA1-7170-257 000 F 5 SCREW

3,7,15,19,21 XA1-7170-307 000 F 29 SCREW

3,11 XA1-7170-407 000 F 4 SCREW7,13 XA4-7170-407 000 F 2(1) SCREW *( )DM-MV630i,MV600i E,

DM-MV600 E,MV590 E25 XA4-9170-357 000 F 2 SCREW

13,17 XA4-9170-407 000 F 9 SCREW

7,9 XA4-9170-409 000 F 5 SCREW3,5,7,11,13,19,25 XA4-9170-457 000 F 27(26) SCREW *( )DM-MV600i E,

DM-MV600 E,MV590 E13 XA4-9170-557 000 F 3 SCREW

23,25 XA4-9170-607 000 F 5 SCREW

Page 231: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

5-44

PARTS LIST

PAGE PART NO. CLASS Q’TY DESCRIPTION REMARKS

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

21 XA9-1167-000 000 F 3 SCREW23 XA9-1294-000 000 F 3 SCREW23 XA9-1349-000 000 F 1 SCREW17 XA9-1481-000 000 F 4 SCREW NEW17 XA9-1482-000 000 F 2 SCREW NEW

25 YG1-0153-000 000 C 1 MOTOR, PZ25 YG1-0154-000 000 C 1 MOTOR, AF25 YG9-5999-000 000 C 1 SHAFT, AF25 YG9-6000-000 000 C 1 SHAFT, PZ25 YG9-6001-000 000 C 2 PHOTO, INTERRUPTER

25 YH8-0122-000 000 C 1 IG METER UNIT NEW19 YN1-3111-000 000 C 1 LENS, EYEPIECE NEW

Page 232: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CHAPTER 6. BLOCK DIAGRAMS

CONTENTS

INTERCONNECTION DIAGRAM

BLOCK DIAGRAMSCAMERA SECTION-1CAMERA SECTION-2SYSTEM CONTROL SECTIONSERVO SECTIONAUDIO-VIDEO SECTION-1AUDIO-VIDEO SECTION-2POWER SUPPLY SECTIONLCD P.C.B. SECTIONJACK P.C.B. SECTION

Page 233: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

( DIGITAL MECHANICAL CHASSIS III )DMC IIIMAIN

CHASSISDRUM

MOTORLOADINGMOTOR

SLIDECHASSIS

VIDEOHEAD

SD CARD

MIC UNIT

DV JACK

DC JACK

HINGE ASS'Y

MIC JACK

AV JACK

USB JACK

S JACK

SPEAKER

RED BLK

LENSUNIT

ZOOM MOTOR

FOCUS MOTOR

FOCUS SENS

ZOOM SENS

TEMP SENS

IG METER

Metal contact (Pins' face up)Metal contact (Pins' face down)

: :

LCD

BACK LIGHT

LCD

LCD UNIT

Metal contact Metal contact

MAIN P.C.B.

DC P.C.B.

BATTERY TERMINAL

OPERATION KEY UNIT

CARD P.C.B.

CCD P.C.B.

JACKP.C.B.

CAC P.C.B.

CN891

CN303 CN302CN300

CN301

CN102CN101

CN100

CN3202

CN3201

CN2000

CN1

CN2101

IC300IC301

IC102

IC103

IC3204

IC100

IC1802

IC2100CN990

CN1101

CN2501

1 11

1 1

1

1

6

1

3

1

2

3332

10A1 B1

A15 B15

17 101118

21

1

1A1B1

A35B35

12

39

9

CN701

IC801

IC802

IC803

IC3203IC3202

IC2300

IC1102

IC2301

IC2000

IC2302

IC3201

IC1101

1

4

CN1201IC1701

IC1002

IC1502

CN1001

CN1501

1

1

12

2322

CN4101

2223

21

15

22120

CN1502

1

7

IC1001

IC1202

IC1501

CN1002

A1B1

A35B35

CN1

IC1601

IC1602

CN2

CN3

CN4

CN5

CN7

21

12

3938

CN61

2

CN4002

CN4000

114

CN4001

12

3332

CN4102

1

22

CVF P.C.B.

CN10701 15

CN2900A1 B1

A10 B10

RKEY P.C.B.

RKEY BACK LIGHT ASS'Y

CN101

CN100

2

1

51

DSW2 P.C.B.

JOG FPC

LCD P.C.B.CN901

IC4201WP4202 WP4201

IC902

IC903

IC901

CN902

CN903

1

1

1

1

7

1

7

12

1 24

12

7

EJECT SW

1

6

1

3

SHOE CONNECTORASSEMBLY

1

12

12

INTERCONNECTION DIAGRAM DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 234: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CN100123456789

101112131415161718192021222324252627282930313233

CN101123456789

10CN102

A1A2A3A4A5A6A7A8A9

A10A11A12A13A14A15B1B2B3B4B5B6B7B8B9

B10B11B12B13B14B15

CN300123456789

1011

CN301123456789

10CN302

123456789

101112131415161718

CN303123456789

101112131415161718192021

CN7011234

GNDCARD DAT2CARD CMDCARD DAT3GNDDVDD 3VCHAGE LEDGNDCARD SCKGNDGNDCARD ACC LEDCARD DATCARD VSS1CARD DAT1VTR UNREGCARD PROPANEL B/T SWCARD DETKEY AD0LI 3VKEY AD1PAE/GREENPANEL OPEN SWDIAL CWDIAL CCWKEY AD2KEY AD3P5VKEY LED2KEY LED1KEY LED0KEY LED0

CK 3VZOOM ADGNDPHOTO SWHALF PHOTO SWTAPE/CARD SWGNDSTART/STOP SWVTR PW SWCAM PW SW

MODE RESETEPMCECNVSSN.CDEBCLKGNDDEBUDGNDDEBDDGNDXDEBENGNDGNDE3V+LI3VGNDFLASH CLKFLASH RSTFLASH RXD1FLASH TXD1N.CDVDD3VCG CSEEP/CG CLKEEP/CG SODOT CLKOSD I0OSD I1VIC HDVIC VD

WWCOIL COMSENS GARDSENS COMDPGDFGVVUU

N.CDEW −DEW +LOAD (−)LOAD (−)MSW SENSMSW VCCMSW VSSLOAD (+)LOAD (+)

U COILU COILW COILW COILV COILV COILC H −W −W +C H +U +U −V +V −CFG2CFG GNDCFG VCCCFG1

BOT EBOT CMIC GNDMIC3REC PRFMIC2MIC1T IN −T OUT −T IN +T OUT +C INCIN GNDLED ALED KS IN −S OUT −S IN +S OUT +EOT EEOT C

MIC GND RINT MIC R MIC GND LINT MIC L

MAIN P.C.B.

CN891123456789CN990

123456789

101112

CN1101A1A2A3A4A5A6A7A8A9

A10A11A12A13A14A15A16A17A18A19A20A21A22A23A24A25A26A27A28A29A30A31A32A33A34A35B1B2B3B4B5B6B7B8B9

B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29B30B31B32B33B34B35

CN20001234567CN2101

123456789

101112131415161718192021222324252627282930313233343536373839

SHOE UNREGSHOE UNREGPOW GNDPOW GNDID-1SPACK ONADV MIC GNDADV MIC LADV MIC R

LCD 3VLCD 5VLCD 8.5VLCD 15VKCD −10VGNDMO GNDVTR UNREGPANEL XOEPANEL LCKLCD CSLCD EEP CS

GNDRAWDATA (6)RAWDATA (5)RAWDATA (4)RAWDATA (3)RAWDATA (2)GNDPWM FAPWM FBPWM ZAPWM ZBZ PSBF PSBZ RES SWF RES SWGNDMO GNDMO GNDP5VP5VVF RVF GVF BGNDCSYNCGNDEVF BL ONEVF 8.5VLCD 3VEVF EEP CSLCD EEP SOUTEVF SENLCD EEP SCKEVF EEP SINEVF 3V ONGNDRAWDATA(7)RAWDATA (8)RAWDATA(9)RAWDATA(10)RAWDATA(11)GNDGNDGNDDSP CLKGNDAGC CSCAM SOCAM SCKTG RSTVGATEXTGHDXTGVDXSGCAM 3VCAM 3VIRIS 3VCCD 15VCCD −7VDA LOADLED RETI SWP GY OUTY GY OUTTEMPP GYROY GYROI ENCIRIS CLIRIS OP

HA GNDH1AH1BHA GNDH2AH2BHA GND

MIC GNDEXT LEXT P DETEXT RMIC GNDMIC GNDP5VCAM LEDAV GNDAV GNDV I/O/HP RAV DETAV GNDAV RAV L/HP LAV GNDAV GNDP GY OUTRMC INCAM 3VSP +SP −V BUSGNDGNDD −D +GNDGNDY GY OUTEJECT SWGNDS DETY I/OYC GNDYC GNDC I/OYC GNDN.C

MAIN P.C.B.

CN2900A1A2A3A4A5A6A7A8A9

A10B1B2B3B4B5B6B7B8B9

B10CN3201

123CN3202

123456

V I/OGNDVTR POW SWT/C POW SWCAM POW SWFCH OTCKSWPGNDPBRFN.CMODE RESETVTR ON IC3201N.CMIC2MIC3TRSTTMSTDITDO

DC −DC +DC J SW

BATT E3BATT INFO ADBATT −BATT −BATT +BATT +

MAIN P.C.B.

CN9011234567CN902

123456789

101112

CN903123456789

101112131415161718192021222324

LCD EEP SOUTLCD EEP SCKSIN1C SYNCPANEL RPANEL GPANEL B

LCD 3VLCD 5VLCD 8.5VLCD 15VLCD −10VGNDMO GNDVTR UNREGPANEL XOEPANEL LCKLCD CSLCD EEP CS

VGLN.CSTVRU/DCKVDEVSTVLVCCVGHVCOMAVDDSTHRL/RN.CVRVGVBGNDCPH3CPH2CPH1Q1HOEHSTHL

LCD P.C.B.

CN1070123456789

101112131415

GNDCCD OUTGNDVL (−7.5V)VH (+15V)GNDH2H1RESETGNDV4V3V1V2VSUB

CCD P.C.B.

CN4101123456789

1011121314151617181920212223

CN4102123456789

10111213141516171819202122

BL5VCOMCKV1CKV2STVXSTVXENBENBVBBDSDXDSGDSGGNDBRGVDDCKH2VSSCKH1STHXSTHXSTH

XSTHSTHVSSCKH1CKH2VDDCSHGRBDSGXDSGDSDVBBCSVENBXENBXSTVSTVCKV2CKV1COM

CVF P.C.B.

CN512CN6

12CN7

123456789

101112131415161718192021222324252627282930313233343536373839

SP +SP −

GNDEJECT SW

YC GNDC I/OYC GNDYC GNDY I/OS DETGNDEJECT SWY GY OUTGNDGNDD +D −GNDGNDVBUSSP −SP +CAM 3VRMC INP GY OUTAV GNDAV GNDAV L/HP LAV RAV GNDAV DETV I/O/HP RAV GNDAV GNDCAM LEDP5VMIC GNDMIC GNDEXT REXT P DETEXT LMIC GNDN.C

JACK P.C.B.

CN4000123456789

101112

CN4001123456789

101112131415161718192021222324252627282930313233

CN4002123456789

1011121314

MMC RSVMMC CMDMMC VSS1MMC VDDMMC CLKMMC VSS1MMC DATMMC DAT1MMC DAT2CARD PROGNDCARD DET

KEY LED0KEY LED1KEY LED2P5VKEY AD3KEY AD2DIAL CCWDIAL CWPANEL OPEN SWPAE/GREENKEY AD1LI 3VKEY AD0CARD DETPANEL B/T SWCARD PROVTR UNREGCARD DAT1CARD VSS1CARD DATCARD ACC LEDGNDGNDCARD SCKGNDCHAGE LEDDVDD 3VGNDCARD DAT3CARD CMDCARD DAT2GNDGND

MENUGNDDIAL CWDIAL CCWDIAL PUSHGNDPANEL B/T SWPANEL OPEN SWP5VKEY LED0KEY LED1KEY LED2KEY AD2REW KEY

CARD P.C.B.

CN1001123456789

101112131415

CN1002A1A2A3A4A5A6A7A8A9

A10A11A12A13A14A15A16A17A18A19A20A21A22A23 A24A25A26A27A28A29A30A31A32A33A34A35B1B2B3B4B5B6B7B8B9

B10B11B12B13B14B15B16B17B18B19B20B21B22B23B24B25B26B27B28B29B30B31B32B33B34B35

CN1201123456789

101112131415161718192021

CN1501123456789

1011121314151617181920212223

CN15021234567

VSUBV2V1V3V4GNDRESETH1H2GNDCCD VH 15VCCD VL −7.5VGNDCCD OUTGND

GNDRAWDATA (6)RAWDATA (5)RAWDATA (4)RAWDATA (3)RAWDATA (2)GNDPWM FAPWM FBPWM ZAPWM ZBZ PSBF PSBZ RES SWF RES SWGNDMO GNDMO GNDP5VP5VVF RVF GVF BGNDCSYNCGNDEVF BL ONEVF 8.5VLCD 3VEVF EEP CSLCD EEP SOUTEVF SENLCD EEP SCKEVF EEP SINEVF 3V ONGNDRAWDATA(7)RAWDATA (8)RAW\DATA(9)RAWDATA(10)RAWDATA(11)GNDGNDGNDDSP CLKGNDAGC CSCAM SOCAM SCKTG RSTVGATEXTGHDXTGVDXSGCAM 3VCAM 3VIRIS 3VCCD 15VCCD −7VDA LOADLED RETI SWP GY OUTY GY OUTTEMPP GYROY GYROI ENCIRIS CLIRIS OP

DRIVE (+)DRIVE (−)HALL IN (+)HALL OUT (+)HALL IN(−)HALL OUT (−)GNDFOCUS AFOCUS BFOCUS-BFOCUS-AFOCUS VCCZOOM LEDZOOM SENSTEMPFOCUS LEDFOCUS SENSZOOM-BZOOM BZOOM-AZOOM A

XSTHSTHCKH1VSSCKH2VDDGRBVSSDSGXDSGDSDVBBENBXENBXSTVSTVCKV2CKV1COMBL5VBL5V

LCD EEP SOUTLCD EEP SCKEVF EEP SINC SYNCPANEL RPANEL GPANEL B

CAC P.C.B.

CN10012345CN101

12

P5VKEY LED0KEY LED1KEY LED2N.C

GNDPANEL B/T SW

RKEY P.C.B.

INTERCONNECTION DIAGRAM

DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

Page 235: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAMERA SECTION-1 DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

DIGITAL VIDEO SIGNALANALOG VIDEO SIGNAL

IC1070ICX089AK

CCD

VCTRL 18

CLR 19

CS 62

CLKO 17

HD IN 16

SCK 64

SDATA 63

VD IN

VGATE

TG RST

AGC CS

DSP CLK

XTGHD

XTGVD15

D9 10

D8 9

D7 8

D6 7

D5 6

D4 5

D3 4

D2 3

D1 2

D0

IC1001MN3112SAV-DRIVER

IC1002AN12070A

TG/CDS/AGC/AD

1

IV3 14

DVDD159

AVDD50

AVDD48

DVDD237

DVDD332

DVDD329

DVDD326

CCD SW20

DRVDD11

DVDD214

CCD OUTCCD OUT

52

H231

H128

R

H 2

H 1

RESET27

V 340

CH2 13 CH 235

IV4 12 V 439

ISUB 10 SUB34

IV2 9 V 241

CH1 8 CH 136

DV15

DSUB1

DV23

DV418

DV3

V 1

VSUB

V 2

V 4

V 317

VHH20

VD

C

6

CAM 3V

P5V

CAM 3V

P5V

IRIS 3V

VL

2

CCD VL-7.5V

VH16IV1 7

IC1202BH9910KVIRIS DRIVE

88

99

1010

3030

2020

2929

19

2828

27

18

33

3737

34

35

3

5

4

2

1

15

45 45

46

21

6

36

V 142

CCD −7VCCD 15V

IRIS 3V

P5V

CAM 3VCCD VH 15V

CAM 3V

LCD 3V

EVF A3V

LCD 3V

CCD VL -7.5VCCD VH 15V

CAM 3V

EVF 8.5VLCD 3V

Q1505Q1506

RAWDATA (2)

RAWDATA (3)

RAWDATA (4)

RAWDATA (5)

RAWDATA (6)

RAWDATA (7)

RAWDATA (8)

RAWDATA (9)

RAWDATA (10)

RAWDATA (11)

Q1201

XSGP5VP5V

LCD 3VCAM 3VCAM 3VIRIS 3V

CCD 15VCCD −7V

RAWDATA (2)RAWDATA (3)RAWDATA (4)RAWDATA (5)RAWDATA (6)RAWDATA (7)RAWDATA (8)RAWDATA (9)

RAWDATA (10)RAWDATA (11)

DSP CLKAGC CSTG RSTVGATEXTGHDXTGVD

PWM FAPWM FBPWM ZAPWM ZB

Z PSBF PSB

CAM SOCAM SCKDA LOADIRIS CLIRIS OP

I SWP GY OUTY GY OUTP GYROY GYRO

I ENCZ RES SW

TEMPF RES SWLED RETCSYNC

VF BVF GVF R

LCD EEP SOUTLCD EEP SCK

EVF SENEVF EEP CSEVF EEP SIN

EVF BL ONEVF 8.5V

EVF 3V ON

CN1002B19A19A20A29B20B21B22B23B24A6A5A4A3A2B2B3B4B5B6

B10B12B15B16B17B18A8A9

A10A11A12A13B13B14B25B34B35B27B28B29B31B32B33A14B30A15B26A25A23A22A21A31A33A32A30A34A27A28A35

PANEL RPANEL GPANEL B

EVF EEP SINLCD EEP SCK

LCD EEP SOUTC SYNC

CN1502

Q1502

Q1501

5673214

VSUBV 2V 1V 3V 4

CCD VH 15VCCD VL -7.5V

RESETH 1H 2

CCD OUT

CN100112345

1112789

14

TOLENS UNIT

XSTHSTH

CKH1CKH2

GRB

DSGXDSGENB

XENBXSTVSTV

CKV2CKV1COMDSDVDDVBBBL5VBL5V

CN15011235789

111215161718192021136

142223

FOCUS AFOCUS B

FOCUS −BFOCUS −AZOOM −BZOOM B

ZOOM −AZOOM A

DRIVE (+ )DRIVE (− )

HALL IN (+ )HALL OUT (+ )

HALL IN (− )HALL OUT (− )FOCUS VCCZOOM SENS

TEMPFOCUS SENS

ZOOM LEDFOCUS LED

CN120189

101118192021123456

121415171316

46

21

15

5

6

4

3

1

2

HALL IN (− )

HALL OUT (− )

HALL OUT (+ )

HALL IN (+ )

DRIVE (− )

DRIVE (+ )

19

27

18

33

34

I ENC

Y GYRO

Y GY OUT

DA LOAD

P GYRO

P GY OUT

I SW

IRIS OP

IRIS CL

36

35

IC1501LV4141W

EVF DRIVER

55BIN

54GIN

53RIN

8

7DATA

60

12

11

57SYNC IN

1

6

20

43

19

17

18

40

50 DSDOUT

47 VCC 2

39 VCCCOM

38 COMOUT

28 CKV1

27 CKV2

26 STV

25 XSTV

29 XENB

30 ENB

23 XDSG

24

45

49

DSG

BOUT

GOUT

ROUT

CKH 2

CKH 1

STH

XSTH

DSD

COM

CKV1

CKV2

STV

XSTV

XENB

ENB

XDSG

DSG

B

G

R

CKH2

CKH1

STH

XSTH

SCLK

HDIN

VDD 0

VDD 2

VDD 1

VCC 1

LOAD

IC1502BR9020FFV-W

EEPROM4DO

1

8 VCC

3 DI

2 SK CS

IC1701BH6564FV

MOTOR DRIVE

2

11

22

14

21IN 3

15

12VDD

3

18

5

8

VM 3

VM 2

VM 1

7

17

6

4

9

19

20

16

10

OUT 3F

OUT 3R

OUT 4R

OUT 4F

OUT 1R

OUT 2R

OUT 2F

OUT 1F

ZOOM A

ZOOM −A

ZOOM −B

ZOOM B

FOCUS −A

FOCUS −B

FOCUS B

FOCUS A

EN 1

EN 2

EN 3

EN 4

IN 4

IN 2

IN 1

PWM ZA

F PSB

Z PSB

PWM ZB

PWM FB

PWM FA

CAM 3V

EVF 8.5V

EVF 8.5V

Q1509 Q1507

CCD OUT

V1V2

VSUBCN1070

2

151314

V3

V4

1211

87

H1H2

RESET

VH (+15V)VL (−7.5V)

9

54

VOUT Q1071BUFFER

VH (+15V)

V1

V2

V3

V4

H1

H2

RG

VDD

VL

VH (+15V)

7

10SUB

4

3

2

1

12

13

9

8

11

Q1504

Q1503

IV3

CH2

IV4

ISUB

IV2

CH1

IV1

TOHINGE ASS'Y

TOCAMERA SECTION-2MAIN P.C.B.CN1101

TOSYSTEM CONTROL SECTIONMAIN P.C.B.CN1101

BL5VCOMCKV1CKV2STV

XSTVXENBENBVBBDSD

XDSGDSG

BRG

VDDCKH2CKH1STH

XSTHXSTH

CN4101

Q4101 Q4102

123456789

101112141516171820212223

COMCKV1CKV2STV

XSTVXENBENBVBBDSD

XDSGDSG

BRG

VDDCKH2CKH1STH

XSTH

CN41022221201918171614131211109865421

CAC P.C.B.CCD P.C.B.

CVF P.C.B.

LCD(CVF)

Page 236: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DIGITAL AUDIO SIGNALDIGITAL VIDEO SIGNAL

13 SO3

12 SCLK3

346 D7

292 C LKON

263 SCS8

185 CDATA3

319 CDATA2

137 AIN8

50 AIN4

340 AIN5

217 AIN6

186 CDATA0

11 CDATA1

324 SCS4

69 CSYNC0

91 VF G2

175 VF B2

312 VF R2

199 ICS1

271 ICS0

101 CDATA5

10 CDATA4

194 PWM0

266 PWM1

111 PWM2

21 PWM3

113TDO

103CCLK

6ADATA 0

315ADATA 1

314ADATA 2

179ADATA 3

255ADATA 4

95ADATA 5

3ADATA 6

178ADATA 7

100

BD

ATA

0

318

BD

ATA

1

183

BD

ATA

2

99

BD

ATA

3

317

BD

ATA

4

7

BD

ATA

5

316

BD

ATA

6

182

BD

ATA

7

105SI3

282EDACK

133EDREQ

281XEWRL

211XECS5

283XEINT0

348LREQ

46RDY

149WCK

62LRCK

148AUD1 O

227AUD1 I

228AMCK

TOAUDIO-VIDEO SECTION-1

TOAUDIO-VIDEO SECTION-2IC2301

IC2301(1/3)MB87M1255

VIC3

69

MA

DD

R L

3

155

MA

DD

R L

4

233

MA

DD

R L

5

303

MA

DD

R L

6

68

MA

DD

R L

7

154

MA

DD

R L

8

67

MA

DD

R L

9

153

MA

DD

R L

10

66

MA

DD

R L

11

231

MA

DD

R L

12

304

MA

DD

R L

2

234

MA

DD

R L

1

156

MA

DD

R L

0

237

MD

QM

L0

74

MD

QM

L1

159

MD

QM

L2

73

MD

QM

L3

306

MC

KE

L

236

MC

LK L

158

XM

CS

L

305

XM

RA

S L

235

XM

CA

S L

71

XM

WE

L

291EADDR M0

219EADDR M1

52EADDR M2

139EADDR M3

290EADDR M4

218EADDR M5

51EADDR M6

289EADDR M7

217EADDR M8

137EADDR M9

49EADDR M10

136EADDR M11

288EADDR M12

216EADDR M13

135EADDR M14

215EADDR M15

287EADDR M16

285EDATA M0

44EDATA M1

132EDATA M2

43EDATA M3

212EDATA M4

131EDATA M5

42EDATA M6

202BDATA 0

31BDATA 1

275BDATA 2

201BDATA 3

30BDATA 4

119BDATA 5

274BDATA 6

200BDATA 7

116ADATA 0

271ADATA 1

197ADATA 2

25ADATA 3

270ADATA 4

24ADATA 5

14MCCLK A

105MCDT A3

188MCDT A2

263MCDT A1

15MCDT A0

189MCCMD A

220XEWRU M

53XERD M

185TRST

9TMS

121VCLK

101TCK

23ADATA 6

113ADATA 7

211EDATA M7

130EDATA M8

283EDATA M9

41EDATA M10

210EDATA M11

40EDATA M12

282EDATA M13

209EDATA M14

128EDATA M15

47EADDR M17

46EADDR M18

134EADDR M19

214EADDR M20

133EADDR M21

213EADDR M22

20AUDI1

258AUDO2

IC1102MB87M1285PBT

MACS

27

A2

60

A3

61

A4

62

A5

63

A6

64

A7

65

A8

66

A9

24

A10

/AP

22

BA

0

23

BA

1

2DQ0

4DQ1

5DQ2

7DQ3

8DQ4

10DQ5

11DQ6

13DQ7

74DQ8

76DQ9

77DQ10

79DQ11

80DQ12

82DQ13

83DQ14

85DQ15

31DQ16

33DQ17

34DQ18

36DQ19

37DQ20

39DQ21

40DQ22

42DQ23

45DQ24

47DQ25

48DQ26

50DQ27

51DQ28

53DQ29

54DQ30

56DQ31

301 MDATA L0

152 MDATA L1

230 MDATA L2

151 MDATA L3

300 MDATA L4

64 MDATA L5

229 MDATA L6

150 MDATA L7

299 MDATA L8

228 MDATA L9

149 MDATA L10

62 MDATA L11

298 MDATA L12

227 MDATA L13

61 MDATA L14

297 MDATA L15

226 MDATA L16

147 MDATA L17

60 MDATA L18

59 MDATA L19

146 MDATA L20

58 MDATA L21

145 MDATA L22

295 MDATA L23

224 MDATA L24

57 MDATA L25

223 MDATA L26

294 MDATA L27

56 MDATA L28

143 MDATA L29

222 MDATA L30

55 MDATA L3196 RAWDATA 2

4 RAWDATA 3

255 RAWDATA 4

179 RAWDATA 5

3 RAWDATA 6

94 RAWDATA 7

254 RAWDATA 8

178 RAWDATA 9

2 RAWDATA 10

93 RAWDATA 11

111 AUDI2

21 AUDO1

194 LRCLK

112 WCLK

142 RDY

221 XEINT1

54 XEINT0

141 XECS M

292 XEWRL M

281 DREQ0

127 XDACK0

22 XRESET

184 TDI

276 BDATACLK

6 TGCLK

7 TG HD

182 TG VD

8 VGATE

26

A1

25

A0

16

DQ

M0

71

DQ

M1

28

DQ

M2

59

DQ

M3

67

CK

E

68

CLK

20

/CS

19

/RA

S

18

/CA

S

17

/WE

IC1101HY57V643220CT-55

SDRAM

CN1101A19A20A29B20B21B22B23B24A6A5A4A3A2B2B3B4B5B6

B10B16B17B18A8A9

A10A11A12A13A14A15A21A23A22A25B12B13B14B15B19B25B26B27B28B29B30B31B32B33B34B35

P5VP5V

LCD 3VCAM 3VCAM 3VIRIS 3V

CCD 15VCCD −7V

RAWDATA (2)RAWDATA (3)RAWDATA (4)RAWDATA (5)RAWDATA (6)RAWDATA (7)RAWDATA (8)RAWDATA (9)

RAWDATA (10)RAWDATA (11)

DSP CLKVGATEXTGHDXTGVD

PWM FAPWM FBPWM ZAPWM ZB

Z PSBF PSB

Z RES SWF RES SW

VF RVF BVF G

CSYNCAGC CSCAM SO

CAM SCKTG RST

XSGDA LOADLED RET

I SWP GY OUTY GY OUT

TEMPP GYROY GYRO

I ENCIRIS CLIRIS OP

CN21011830

P GY OUTY GY OUT

AUD2 IMACS I

EADDR M0 toM22EDATA M0 to M15

XEWRUXERDTRSTTMS27M

CARD SCKCARD DAT3CARD DAT2CARD DAT1CARD DATCARD CMD

CARD SCK

CARD DAT3

CARD DAT2

CARD DAT1

CARD DAT

CARD CMD

WCLK

LRCLK

AUDO1

AUDI2

RDY

XEINT1

XEINT0

XECS M

XEWRL M

DREQ0

XDACK0

XRESET

TDI

BDATA CLK

MA

DD

R L

(0)

MA

DD

R L

(1)

MA

DD

R L

(2)

MA

DD

R L

(3)

MA

DD

R L

(4)

MA

DD

R L

(5)

MA

DD

R L

(6)

MA

DD

R L

(7)

MA

DD

R L

(8)

MA

DD

R L

(9)

MA

DD

R L

(10)

MA

DD

R L

(11)

MA

DD

R L

(12)

MDATA L(20)

MDATA L(21)

MDATA L(19)

MDATA L(18)

MDATA L(17)

MDATA L(16)

MDATA L(15)

MDATA L(14)

MDATA L(13)

MDATA L(12)

MDATA L(11)

MDATA L(10)

MDATA L(9)

MDATA L(8)

MDATA L(7)

MDATA L(6)

MDATA L(5)

MDATA L(4)

MDATA L(3)

MDATA L(2)

MDATA L(1)

MDATA L(0)

MDATA L(22)

MDATA L(23)

MDATA L(24)

MDATA L(25)

MDATA L(26)

MDATA L(27)

MDATA L(28)

MDATA L(29)

MDATA L(30)

MDATA L(31)

P 5V

LCD 3V

CAM 3VIRIS 3VCCD 15VCCD−7V

Q2302

Q2301

TOCAMERA SECTION-1CAC P.C.B.CN1002

TOCAMERA SECTION-1CAC P.C.B.CN1002

TOSYSTEM CONTROL SECTIONMAIN P.C.B.

TOJACK P.C.B. SECTIONJACK P.C.B.CN7

MAIN P.C.B.(1/6)

CAMERA SECTION-2 DM-MV650i E, DM-MV630i E, CM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 237: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

70

STA

RT/S

TOP

SW

ITCH

39EPM

44CE

7CNVSS

31FLASH CLK

32FLASH RTS

30FLASH RXD1

29FLASH TXD1

36FCHO/DEBUGO

16RMC PULSE IN

10MODE RESET

79S DET

66EJECT SWITCH

54VCO HI

17VTOS EN

48VIC3 CS

35VIC3 CLOCK

34VIC3 TO SUBCOM DATA

33SUBCOM TO VIC3 DATA

2STOV PC

1VTOS PC

24VTOS ACTIVE

67CASSETTE IN SWITCH

59MTOC MODE2

58MTOC MODE1

57MTOC MODE0

40NTSC XPAL

80LET CONT

81WIDE CONT

82LINE IN

84CASSETTE MEMORY A/D0

85CASSETTE MEMORY A/D1

86CASSETTE MEMORY A/D2

26CASSETTE MEMORY ON

27CASSETTE MEMORY SDL

28CASSETTE MEMORY SDA

49XRESET

4 LCD EEP SIN

38 PANEL BL ON

46 PANEL UD

5 OSDC/EEPROM/EVFIC/LCDIC/SCK

3 OSDC/EEPROM/EVFIC/LCDIC/SO

19 EVF SEN

55 EVF 3V ON

56 EVF BL ON

63 PANEL LR

61 LCD ON

45 EVF EEPROM CS

20 EVF 8.5V ON

50CHAGE LED

65PANEL BOTTOM/TOP SWITCH

91KEY AD0

92KEY AD1

75PAE/GREEN SW

64PANEL OPEN SWITCH

42DIAL CW SWITCH

43DIAL CCW SWITCH

93KEY AD2

95KEY AD3

23KEY LED0

22KEY LED1

21KEY LED2

78T/XC PW SW

77CAM POWER SWITCH

76VTR POWER SWITCH

69

HA

RF P

HO

TO S

WITC

H

68

PH

OTO

SW

ITCH

11

RE

SE

T

2LIDET12 VOUT

13 VIN

14 VRO

5 SW

7 VDC

25 LI3V DETECT

18 E3DET

72 CH DET

3VBAT

4CS

6SWOUT

IC100M30620MCN

MODE MI-COM.

IC102BD4187FVBACKUP

5VCC

73 UNREG DET

11 XOUT

13 XIN

8 XCIN

9 XCOUT

52 VTR POWER SWITCH

71 DC J DET

90 A/D I

89 A/D V

99 PS

100 TRI

41 CHAGE

88 BATT INFO A/D

96 VREF

97 AVCC

60 VCC2

14 VCC1

4VOUT

IC103BD4746G

RESET

E3V+LI3V

MICOM UNREG

E3V

DVDD 3V

INIT-CHG1

INIT-CHG2

KEY LED0KEY LED1KEY LED2KEY AD3KEY AD2

DIAL CCWDIAL CW

PANEL OPEN SWPANEL B/T SW

PAE/GREENKEY AD0KEY AD1

CARD ACC LEDCHAGE LEDCARD DETCARD PROCARD DAT1CARD DATCARD SCKDVDD 3V

CARD DAT3CARD CMDCARD DAT2

CN400112356789

151013112126141618202427293031

REW KEYDIAL PUSH

MENUKEY AD2

KEY LED2KEY LED1KEY LED0

PANEL OPEN SWPANEL B/T SW

DIAL CCWDIAL CW

P5V

CN4002

1

2

3

56

4

1451

1312111087439

CN10212634578

CARD DETCARD PROMMC DAT2MMC DAT1MMC DATMMC CLKMMC VDDMMC CMDMMC RSV

CN400012109875421

LED4000

VTR UNREG

Q4000

SW4001

GREENSW4004

P AE

DE SEL

SW4000

DE ON/OFF

SW4002

CARD MIX

SW4003

SELF

BT401

BT400LITHIUMBATTERY

CK 3VPHOTO SW

HALF PHOTO SWSTART/STOP SWTAPE/CARD SW

VTR PW SWCAM PW SW

ZOOM AD

CN101145869

102

DVDD3VE3V+LI3V

EPMCE

CNVSSFLASH CLKFLASH RST

FLASH RXD1FLASH TXD1MODE RESET

DEBCLKDEBUDDEBDD

XDEBENCG CS

EEP/CG CLKEEP/CG SO

DOT CLKOSD I0OSD I1VIC HDVIC VD

VIC VDVIC HDOSD I1OSD I0

DOT CLKEEP/CG SO

EEP/CG CLKCGCS

XDEBENDEBDDDEBUD

DEBCLKZOOM KEY

VTR POW SWCAM POW SWT/C POW SW

FCH OMODE RESET

RMC INXRESET

S DETEJECT SWLET CONT

WIDE CONTLINE INVCO HI

VTOS ENVTOS CS

VTOS SCKVTOS DATASTOV DATA

STOV PCVTOS PC

VTOS ACTIVESTOV MODE2STOV MODE1STOV MODE0NTSC XPAL

CAS INMIC 1MIC 2MIC 3

MIC ONCARD DETCARD PRO

CARD ACC LED

CARD DAT1CARD DATCARD SCK

CARD DAT3CARD CMDCARD DAT2

LCD 3VLCD 5V

LCD 8.5VLCD 15V

LCD −10VVTR UNREGPANEL XOEPANEL LCK

LCD CSLCD EEP CS

1234589

101112

EVF EEP SINLCD EEP SCK

LCD EEP SOUTEVF SEN

EVF 3V ONEVF BL ON

EVF EEP CSEVF 8.5V

A34A33A31A32A35A27A30A28

CN102B7

A15A2A3A4B2B3B4B5A1A6A8

A10A12B8B9

B10B11B12B13B14B15

CARD ACC LEDCARD PROCARD DET

CHAGE LEDPANEL B/T SW

KEY AD0KEY AD1

PAE/GREENPANEL OPEN SW

DIAL CWDIAL CCWKEY AD2KEY AD3

KEY LED2KEY LED1KEY LED0KEY LED0

CARD DAT2CARD CMDCARD DAT3CARD SCKCARD DAT

CARD DAT1

CN100

Q101

1217197

182022232425262728303132332349

1315

CK 3V

DVDD3VE3V+LI3V

Q103

Q102

D100LI 3V

VTR UNREG

X10116MHz

X10032.768KHz

Q100

Q104

VTR ONDC J DET

A/D IA/D V

INIT-CHG1INIT-CHG2

CHAGEBATT INFO ADEVF 8.5V ON

BATT E3

E3V

E3V+LI3V

LCD 3VLCD 5VLCD 8.5VLCD 15VLCD −10VVTR UNREG

P5V

LI 3V

CN990

CN1101

Q990 Q991

TOPOWER SUPPLY SECTIONMAIN P.C.B.

TOHINGE ASS'Y

TOCAC P.C.B.CN1002

TOCAMERA SECTION-2MAIN P.C.B.

TOOPERATION KEY UNIT

TOAUDIO-VIDEO SECTION-2MAIN P.C.B.

TOAUDIO-VIDEO SECTION-1MAIN P.C.B.

TOSERVO SECTIONMAIN P.C.B.

N.C

REW KEYKEY AD2

P5VKEY LED2KEY LED1KEY LED0

PANEL OPEN SWPANEL B/T SW

PANEL OPEN SW

P5VKEY LED2KEY LED1KEY LED0

CN1001432

PANEL B/T SW

CN101

CN103

2

REW

SW103

STOP

SW100

FF

SW101

PLAY

SW102 P5V

P5V

TORKEY BACKLIGHT ASS'Y

TODSW2 P.C.B.

TOHINGE ASS'Y

SD CARD

ZR70 MC AZR65 MC ADM-MV650i EDM-MV630i EDM-FV40ONLY

ZR70 MC AZR65 MC ADM-MV650i EDM-MV630i EDM-FV40ONLY

CARD P.C.B.

RKEY P.C.B.

MAIN P.C.B.(2/6)

SYSTEM CONTROL SECTION DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 238: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAPSTAN SERVO SIGNAL

DRUM SERVO SIGNAL

IC301BD6636KV

MOTOR DRIVE

IC300NJM12904R

OPE AMP

PGFG

FG

FG

DRUMMOTOR

CAPSTANMOTOR

MODE SW

LOADINGMOTOR

DEW SENSOR

CASSETTE IN SW

TAKE UPREEL

FG SUPPLYREEL

MIC

SAFETYSW

CN300W 1

289

10113675

WVVUU

COIL COMDPGDFG

SENS COM

CN303BOT E 1BOT C 2EOT E 20EOT C 21LED A 14LED K 15

REC PRF 5MIC3 4MIC2

DVDD 3V

6MIC1 7C IN 12T IN− 8T IN+ 10

T OUT− 9T OUT+ 11

S IN− 16S IN+ 18

S OUT− 17S OUT+ 19

DVDD 3V

DVDD 3V

DVDD 3V

P 5V

CN302C H− 7W− 8W+ 9

C H+ 10U+ 11U− 12V+ 13V− 14

CFG2 15CFG1 18

U COIL 1U COIL 2W COIL 3W COIL 4V COIL 5V COIL 6

CFG VCC 17

CN301459

10DEW+ 3

MSW SENS 6MSW VCC 7MSW VSS 8

28 D.VM

29 D.VS

60 C.VM

15 C.FGSMT

16 D.PGSMT

21 D.FGSMT

30 D.EC

40 L.FRB

41 L.REF

57 D.PS

58 C.PS

59 C.FBR

62 C.EC

61 C.VS

37

35

34

33D.COM

D.U

D.V

D.W

3

1

2

7OUT 2

6IN−2

5IN+2

IN−1

OUT 1

IN+1

20

19

18D.FGIN−

D.FGPGIN+

D.PGIN−

12C.HW−

11C.HW+

10C.HU+

9C.HU−

8C.HV+

7C.HV−

44L.REV

42L.FWD

46R.IN1+

47R.IN1−

49R.IN2+

50R.IN2−

2C.U

3C.V

5C.W

D VM

D VS

C VS

CFG

DPG

DFG

CFGDPGDFG

DERRLOAD FRLODE ONDRUM ONCAP ON

CAP FWDCERR

T REEL FGS REEL FG

DA CFGDEW

MSW ADTAPE TOPTAPE ENDTAPE LED

REC PROOFREEL LED CONT

DA TREELDA SREEL

MIC2MIC3

48 ROUT1

51 ROUT2

D VMD VSC VMC VS

MIC1MIC2MIC3

Q304

Q302 Q301

Q300

Q305

27 UNREGVTR UNREG

22 VCCDVDD 3V

45 L.VMP 5V

14C.FGIN−

13C.FGIN+

LOAD (− )LOAD (− )

LOAD (+ )

LOAD (+ )

Q303

BOT DET

Q303

EOT DET

MIC ON

CAS IN

TOAUDIO-VIDEO SECTION-3MAIN P.C.B

TOPOWER SUPPLY SECTIONMAIN P.C.B

TOAUDIO-VIDEO SECTION-1MAIN P.C.B

TOSYSTEM CONTROL SECTIONMAIN P.C.B

TAPE TOPSENSOR

TAPE ENDSENSOR

DMC I I I

MAIN P.C.B. (3/6)

SERVO SECTION DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 239: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD USB/SIC SIGNAL DIGITAL AUDIO SIGNALANALOG AUDIO SIGNALANALOG VIDEO SIGNAL

AIF CS

VIF CS

AV SO

AV SCLK

IC2301 (2/3)MB87M1254

VIC3

IC2100LD502U

VIF2

136 AIN13

339 AIN 14

27 ICD0

249 VRH 2

88 VRL 2

85 C O

250 Y O

233

VIC

VD

364

C I

N

298

CLA

MP

Y

248

Y I

N

257

VC

LK

154

CS

YN

C I

113 TDO

112 TCK

267 TMS

47453732312620117

48

46

17

15

12 13 14 19

34

21

2

4

36

40

25

30

27

10

E1 A0

C2

A2

B5

A5

C5

D5

B6

A6

C6

D6

E6

B2

C3

D4 A19

D3 NC3

F1 CE

G1 OE

A4 WE

B4 RESET

D1

C1

A1

B1

D2

IC2300MBM29LV160BE7OPBT

FLASH

E2DO0

H2

E3

H3

H4

E4

H5

E5

F2

G2

F3

G3

F4

G5

F5

G6DO15

261SCLK2

321SO2

17SCS3

191SCS2

205

ED

ATA

(0)

34 275 123 332 204 33 122 32 203 121 331 31 273 202 120

ED

ATA

(15

)

129

210

40

337

39

128

209

38

336

127

208

37

277

126

335

334

36

125

206

276

35

212XECSO

43XERD

44XEWRU

23TRST

135XRESET

333EADDR (22)

279EADDR (0)

4

1

65 V IN 4V OUT

8

5

IC802NJM2770RSP DRIVER

IC803TK11140CS

4V REGULATOR

225 D4

291 D5

280 XECS2

147 LPS

131 XECS1

20 PWM4

9 CDATA7

16 SCS5

107 SCS6

15 SCS9

338 XECS4

329 DP

330 DN

CAM LED

D +

VBUS

D −

146 D3

34

35

33

24

22

5820 30 28 42

23

25

26

31AD OFF

32REC MUTE

36AUDIO MUTE

4139131415

11

4076432164

495060

61

53

54

384344464748

12

9

16

10

IC801AK4561AUDIO

INTERFACE

CSYNC I

C OUT

Y OUT

V OUT

C LINE IN

Y LINE IN

V LINE IN VCLK

AUDIO MUTE

HP MUTE

HP ON

Y IN

CLAMP Y

REC C

Y OUT

C OUT

VIC VD

CLAMP

BPF

EQ LPF

Y/C SEP

C SYNC SEP

SERIAL DATA

DATA CSCLK

27MHz

VIF 4.7V

CLAMP

VIF 4.7V

VCC

GCA

Y CONT

CLAMP C CONT

75Ω 75Ω 75Ω

Q2104

Q3503 Q3501

WIDEDETECT

Q2103 Q2101

Q2106Q2105

Q2100

Q2102

AVDD 1.4V

MIC(R)

(L)

RMC INEJECT SW

S DETLET CONT

WIDE CONTLINE IN

X RESET

MIC2MIC3

ADV MIC LADV MIC RSHOE ID1SHOE ON

EADDR (0)

EADDR (6)

EADDR (7)

EADDR (8)

EADDR (9)

EADDR (10)

EADDR (11)

EADDR (12)

EADDR (13)

EADDR (14)

EADDR (15)

EADDR (16)

EADDR (17)

EADDR (18)

EADDR (19)

EADDR (20)

EADDR (1)

EADDR (2)

EADDR (3)

EADDR (4)

EADDR (5)

TOCAMERA SECTION-2MAIN P.C.B.

FROMAUDIO VIDEOSECTION-2IC2301 (3/3)

FORMCAMERASECTION

SP STANDBY

EDATA (0)

EDATA (1)

EDATA (2)

EDATA (3)

EDATA (4)

EDATA (5)

EDATA (6)

EDATA (7)

EDATA (8)

EDATA (9)

EDATA (10)

EDATA (11)

EDATA (12)

EDATA (13)

EDATA (14)

EDATA (15)

27MTCKTMS

EADATA (0) to (15)EADDR (0) to (22)

XERDXEWRU

TRSTAUD 2 IMACS1 I

INT MIC RINT MIC L

CN701

CN2101

24

TMSTCKTDOV I /OTRSTMIC2MIC3

VTR ON IC3201

CN2900B8A7

B10A1B7B5B6B3

V I /O/H/P RY I /OC I /O

AV L/HP LAV RD −D +

V BUSCAM LEDAV DET

EXT PDETEXT REXT LSP −SP +

S DETEJECT SW

RMC IN

11343715142627238

12342

2221333119

Q701

P 5V

Vcc4V

Q804

Q807

Q803

AV SCLKAV SOVIF CS

CONTROLREGISTERDAC

ADC AUDIO I /FCONTROL

CLOCKDIVIDER

CRNETWORK

CRNETWORK

EXTDETECT

V REF

CRNETWORK

POWER OFFMUTE OFF

MUTE

CRNETWORK

HP AMP

GAIN AMP

PRE AMP INV AMP EQ AMP HPF ALC AMP

LINE

LINE

MIC

MIC

Q802

LINE AMP

HP AMP

AA4.7VAA3V

AV SO

AIF CS

AV SCLK

AMCK

WCK

LRCK

Q806Q812

Q810,Q811

Q808

Q805

Q801

TOSYSTEM CONTROL SECTIONMAIN P.C.B.

TOPOWER SUPPLY SECTIONMAIN P.C.B.

TOJACK P.C.B.CN7

N.C

TOSERVO SECTIONMAIN P.C.B.

VIC VD TOAUDIO-VIDEO SECTION-2

Q3502

AA 4.7V

VTR ONPOWER SUPPLY SECTIONMAIN P.C.B.

MAIN P.C.B. (4/6)

ZR70 MC ADM-MV650i EDM-FV40ONLY

NTSCiPALONLY

ZR70 MC ADM-MV650i EDM-FV40ONLY

DATA COMMUNICATION

AUDIO-VIDEO SECTION-1 DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 240: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DRUM SERVO SIGNAL CAPSTAN SERVO SIGNALDIGITAL (VIDEO+AUDIO SIGNAL)DIGITAL DV SIGNAL

TOAUDIO-VIDEO SECTION–1IC2301 (2/3)

VIDEO SIGNAL

AUDIO SIGNALTOCAMERA SECTION–2IC2301 (1/3)

NC

1

304

164

242

358

165

305

80

243

359

81

306

244

167

82

160

74

238

302

75

161

355

356

76

162

240

303

357

163

241

78

39

38

37

19

18

17

16

15

361

26 ICLK

116 ICD3

270 ICD2

213 BRQ

268 TCLK

45 BGRNTX

265 PWM7

110 PWM6

193 PWM5

341 AIN0

286 AIN1

218 AIN2

138 AIN3

48 AIN12

68 RFGT

232 RFGS

296 PWMD

153 PWMC

67 CFG

66 DPG

231 DFG

152 ROFS

58 D6

168

307

362

246

169

83

360

20

21

35

22

34

33

32

31

30

29

26

25

24

23

53

51

50

48

47

45

44

42

13

11

10

8

7

5

4

2

141

233VD

155HD

234OSD I0

70OSD I1

156DOT CLK

226D0

347D1

59D2

145CTL0

224CTL1

57SYSCLK

285AIN7

216AIN10

214XEINT2

198ICD1

264SCS0

192UAT CLK

325TX

19RX

272XDEBEN

118DEBUD

200DEBDD

28DEBCLK

117ICS2

188SO1

187SCLK1

104SCLK0

322SO0

53

220

140

3

49

43

27

14

9

IC2302W986416DH-7

SDRAM

IC2301(3/3)MB87M1255

VIC3

3131 177295353 93151230 176

65

158

350

294

229

150

252

63

2

17

21

9

1

6

34

32

35

3029 13 232226258 281211

42

43

45

46

39

40

36 385

MAIN P.C.B. (5/6)

HA 4.7VHA 3V

SDRAM2.7V

VCCQ1

VCCQ4

VCCQ3

VCC3

VCC2

VCCQ2

VCC1

ADDR (13)

ADDR (12)

ADDR (11)

ADDR (10)

ADDR (9)

ADDR (8)

ADDR (7)

ADDR (6)

ADDR (5)

ADDR (4)

ADDR (3)

ADDR (2)

ADDR (1)

ADDR (0)

MDATA (14)

MDATA (15)

MDATA (13)

MDATA (12)

MDATA (11)

MDATA (10)

MDATA (9)

MDATA (8)

MDATA (7)

MDATA (6)

MDATA (5)

MDATA (4)

MDATA (3)

MDATA (2)

MDATA (1)

MDATA (0)

DQMU

CLK

CKE

/CS

/RAS

/CAS

/WE

DQML

DQMU

MCLK

CKE

XCS

XRAS

XCAS

XWE

DQML

A13(BA0)

A12(BA1)

A11

A10/AP

A9

A8

A7

A6

A5

A4

A3

A2

A1

A0

DQ15

DQ14

DQ13

DQ12

DQ11

DQ10

DQ9

DQ8

DQ7

DQ6

DQ5

DQ4

DQ3

DQ2

DQ1

DQ0

DQMU

MCLK

CKE

XCS

XRAS

XCAS

XWE

DQML

ADDR (13)

ADDR (12)

ADDR (11)

ADDR (10)

ADDR (9)

ADDR (8)

ADDR (7)

ADDR (6)

ADDR (5)

ADDR (4)

ADDR (3)

ADDR (2)

ADDR (1)

ADDR (0)

MDATA (15)

MDATA (14)

MDATA (13)

MDATA (12)

MDATA (11)

MDATA (10)

MDATA (9)

MDATA (8)

MDATA (7)

MDATA (6)

MDATA (5)

MDATA (4)

MDATA (3)

MDATA (2)

MDATA (1)

MDATA (0)

XTPB

TPB

XTPA

TPA

H1B2

CN2000H1A

3

H2A 5H2B 6

CH-1HEAD

DRUMUNIT

CH-2HEAD

CN2501TODV TERMINAL

TOSYSTEM CONTROL SECTIONMAIN P.C.B.

GD

H C

ON

T

EQ

CO

NT

GD

L C

ON

T

RA

GC

RA

PC

EQ

FC

RC

LK

XR

CLK

RA

FC

UTI

L S

WP

0

UTI

L S

WP

2

UTI

L S

WP

1

RA

GC

RA

PC

UTI

L S

WP

3

RC

LK

XR

CLK

UTI

L S

WP

4

SDL

UTIL SWP 5

REC H

SWP

PBRF

SDLSEL

XRDAT

PB H

RDAT

REC CONT RECON

GOH

PB ON

IC2000LD502WA

VRP2 H1A

H1B

H2A

H2B

XR

CLK

RC

LK

RA

FC

RA

PC

RA

GC

EQ

FC

EQ

CO

NT

GD

L C

ON

T

GD

H C

ON

T

Q2000

XTPBTPB

XTPATPA

VIC VDVIC HDOSD I0OSD I1

DOT CLKSTOV MODE0STOV MODE1STOV MODE2

STOV PCCG CS

VTOS CSZOOM KEYCARD DETCARD PRO

CARD ACCESS LEDVTOS EN

VTOS SCKVTOS DATASTOV DATA

XDEBENDEBUDDEBDD

DEBCLKNTSC XPALEEP/CG SO

EEP/CG CLKVTOS ACTIVE

VTOS PCVCO HI

VTR POW SWT/C POW SW

CAM POW SWFCH 0

1234

EQ VCO

VCA

GDL

VIC VD

VIC HD

OSD I0

OSD I1

DOT CLK

STOV MODE0

STOV MODE1

STOV MODE2

STOV PC

CG CS

VTOS CS

ZOOM KEY

CARD DET

CARD PRO

CARD ACCESS LED

VTOS EN

VTOS SCK

VTOS DATA

STOV DATA

XDEBEN

DEBUD

DEBDD

DEBCLK

NTSC XPAL

EEP/CG SO

EEP/CG CLK

VTOS ACTIVE

VTOS PC

VTR POW SWT/C POW SW

CAM POW SWFCH 0SWPPBRF

A3A4A5A6A8

A10

CN2900

LOAD FRLOAD ONCAP ON

DRUM ONREC PROOF

REEL LED CONTDA CFG

DA SREELDA TREELTAPE TOPTAPE ENDMSW AD

DEWCAS IN

T REEL FGS REEL FG

DERRCERRCFGDPGDFG

CAP FWDTAPE LED

LOAD FR

LOAD ON

CAP ON

DRUM ON

REC PROOF

REEL LED CONT

DA CFG

DA SREEL

DA TREEL

TAPE TOP

TAPE END

MSW AD

DEW

CAS IN

T REEL FG

S REEL FG

DERR

CERR

CFG

DPG

DFG

CAP FWD

TAPE LED

TOSERVO SECTIONMAIN P.C.B.

VIC VDTOAUDIO-VIDEO SECTION-1

AUDIO-VIDEO SECTION-2 DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 241: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAPSTAN SERVO SIGNALDRUM SERVO SIGNAL

27

3446

50

43

53

40

56

5

64

11

62

37

57

21

6022

15

6116

28

29

30

31

33

VCC

IC3201MB3881DC/DC

CONVERTER

5 V IN 4V OUTIC3202

TK11128CS2.7V REGULATOR

5 V IN 4V OUTIC3203

TK11147CS4.7V REGULATOR

5 V IN 4V OUTIC3204

TK11125CS2.5V REGULATOR

13

2

75

6

IC1802MM6564XFOPE/AMP

MAIN P.C.B.(6/6)

FU3201

FU3202

FU3203

FU3204

FU3205

OSC

CH1

CH2

CH3

CH4

4

3 5

12

Q32041.4V (CH1)

4

3 5

12

Q32053V (CH3)

CH8

CH7

4

3 5

12

Q3206P5V (CH4)

CH5

4

3 5

12

Q3207DRUM VS (CH5)

CH6

4

3 5

12

Q3208CAP VS (CH6)

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

LPF

DVDD 1.4V

LPF

LPF

LPF

AVDD 1.4V

MACS 1.4V

VTR UNREG

AA 3V

DVDD 3V

DIF 2.7V

SDRAM 2.7V

DVDD 2.5V

AVDD 2.7V

LPF

LPF

LPF HA 4.7V

VIF 4.7V

AA 4.7V

LCD 5V

P 5V

LCD 15V

LCD −10V

LPF LCD 8.5V

DVDD 3V

CAM 3V

LPF IRIS 3V

LPF HA 3V

LCD 3V

ON/OFFCONT.

CH1,3,4,8

CH2

CH5,6

CH7

D VMC VS

SHOE UNREGSHOE UNREG

ID-1ADV MIC LADV MIC R

CN89112589

C VSD VS

ADV MIC RADV MIC LSHOE ID1 SHOE ON

TO SYSTEM CONTROL SECTIONMAIN P.C.B.

TO SHOE CONNECTOR ASS'Y

TO AUDIO-VIDEO SECTION-1MAIN P.C.B.

TOSYSTEM CONTROL SECTIONMAIN P.C.B.

4

3

2

1

5

7

8

T3201

4

3

2

1

5

7

8

T3202

D3201

Q3202

Q3201

Q3200

D3202

D3204

LPF

LPF

CCD 15V

CCD −7V

D3203

D3205

DC +DC J SW

DC −

DC J DETINIT-CHG2INIT-CHG1

CHAGEA/D I

VTR ONEVF 8.5V ON

A/D VBATT INFO AD

BATTA E3

CN3201

Q1806

Q1805

Q3209

Q3210

Q1804

Q1808 Q1807

D1803

D1802

FU1801

D1801

Q1803

Q1802

2

1

6 5 4

2 3

3 41

7 6 58

231

BATT E3BATT INFO AD

BATT −BATT −BATT +BATT +

CN3202123456

MICOM UNREG

VTR ONTO AUDIO-VIDEO SECTION-1MAIN P.C.B.

TODC P.C.B.DC JACK

TOSYSTEM CONTROL SECTIONMAIN P.C.B.

TOBATTERY TERMIANL

1 2 3

6 5 4

ZR70 MC ADM-MV650i EDM-FV40ONLY

POWER SUPPLY SECTION DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 242: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

PANEL R

TOHINGE ASS'Y

TOHINGE ASS'Y

PANEL B

OELCKLCSECS

SO

SOCLK

PANEL G

CN901567

C SYNC4

SIN 13

LCD EEP SOUT1LCD EEP SCK2

LCD 3V1

LCD 5V2

LCD 8.5V3

LCD 15V4

LCD -10V5

VTR UNREG8

PANEL XOE

LCD CSPANEL LCK

CN902

91011

LCD EEP CS12

LCD 3V

LCD 5V

LCD-10V

VTR UNREG

LCD 8.5V

LCD 15V

1

8VCC2

3

4

E CS

CLK

SO

SO

210 15V ON

BL ON

5V ON

3V ON

Q5

11Q6

7Q2

6

20

Q1

LCD 3V

LCD 3V

LCD 8.5V LCD 7.5V

3

4

19

SO

CLK

LCK

OE

9 Q4

LCD 15V

15V ON

Q901

Q912 Q911

Q903

Q902

1ON

3

WP4201

WP4202

4

1235

4

5

VD

D

CLK

DATA

DI

DO

LCK

OE

CONTROL

LCD UNREG

Q4201SWITCH

VTR UNREG

Q4202DRIVER VTR UNREG

Q4203

Q904

BACK LIGHT

RCLAMP

CNTRST GAMMA S/H

IC903AN2545NFHQ

LCD DRIVE

37

47

1

34

8

9

18

43

25

44

33

32

31

30

29

24

23

22

20

19

39

38

48

2

11

14

16Q910

5V ON

LCD 5V

VG

CN903

VBL/R

STHRSTHL

22

2310

6

9

573

21201924

1213

1716

VR 15AVDD 11VCC 8VGL 1

L CS

CLK

SO

CS

BRIGHT

R OUT

G OUT

B OUT

GCLAMP

GCA

GCA

GCAB

CLKCONTROL

D1

VC

C2

VDD

VC

C3

VCC1

STH241

RL

STH1

CPH3

CPH2

CPH1

STV1

STV2

CPV

OEV

QH

OEH

COMDC

VCOM

CPH3CPH2CPH1STVRSTVLCKVDEVQ1HOEH

VCOMVGH

SI/F

CLAMP

PLL

LCD UNIT

TIMINGGENERATOR

LCD 7.5V

Q907

Q908

Q909

12

3

6 5 4

6

1

5

3

4

2

1

124

65323

6 5 4

CS

SK

4

3

2

1

5

7

T4201CPU9D25

6

7.5V

Q906

LCD 3V

3V ON

Q905

IC901BR9010RFV-W

EEPROM

IC902BU2092FVSERI/PARA

CONVERTER

IC4201R1223N152H

DC/DCCONVERTER

CONTROL

LCD P.C.B.

DATA COMMUNICATION

LCD

LCD P.C.B. SECTION DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 243: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD USB/SIC SIGNAL ANALOG AUDIO SIGNALANALOG VIDEO SIGNAL

Y C

G1 G2

4 OUT 1VCCIC1601

ENC.03JAP SENSOR GYRO

4 OUT 1VCCIC1602

ENC.03JBY SENSOR GYRO

CN7

LED1 ZD1

SP +SP −

CAM LEDEXT L

EXT P DETEXT RAV R

AV DETV I /O/HP RAV L/HP L

VBUSD−D+

RMC INEJECT SW

S DETY I /OC I /O

P GY OUTY GY OUT

18173137363525272824161312208652

219

CN5

SP +SP −

12

CN2

CN1

MIC JACK

AV JACK

VBUS (+5V)D−D+

CN3123

EJECT SWCN6

2 TOEJECT SW

CN4

S JACK

SPEAKER

CAM3V

CAM3V

TOAUDIO-VIDEO SECTION-1MAIN P.C.B.CN2101

TOCAMERA SECTION-2MAIN P.C.B.CN2101

USB JACK

JACK P.C.B.

ZR70 MC AZR65MCDM-MV650i EDM-MV630i EDM-FV40ONLY

JACK P.C.B. SECTION DM-MV650i E, DM-MV630i E, DM-MV600i E, DM-MV600 E, DM-MV590 E

CANON INC. 2003C01 Feb. 2003

Page 244: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV650i EMAIN P.C.B.CAC P.C.B.CCD P.C.B.LCD P.C.B.CVF P.C.B.

JACK P.C.B.CARD P.C.B.RKEY P.C.B.

Page 245: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 246: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 247: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 248: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 249: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 250: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 251: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 252: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 253: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 254: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 255: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 256: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 257: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (COMPONENT SIDE)

DM-MV650i E

Page 258: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 259: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 260: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV650i E

Page 261: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV630i EMAIN P.C.B.CAC P.C.B.CCD P.C.B.LCD P.C.B.CVF P.C.B.

JACK P.C.B.CARD P.C.B.RKEY P.C.B.

Page 262: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 263: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 264: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 265: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 266: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 267: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 268: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 269: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 270: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 271: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 272: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 273: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 274: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (COMPONENT SIDE)

DM-MV630i E

Page 275: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 276: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 277: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV630i E

Page 278: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

DM-MV600i EDM-MV600 EDM-MV590 E

MAIN P.C.B.CAC P.C.B.CCD P.C.B.LCD P.C.B.CVF P.C.B.

JACK P.C.B.CARD P.C.B.RKEY P.C.B.

Page 279: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 280: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

MAIN P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 281: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 282: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CAC P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 283: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 284: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CCD P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 285: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 286: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

LCD P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 287: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 288: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CVF P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 289: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 290: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

JACK P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 291: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (COMPONENT SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 292: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CARD P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 293: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 294: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

RKEY P.C.B. (SOLDERING SIDE)

DM-MV600i E,DM-MV600 E,DM-MV590 E

Page 295: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

CZ Chart

Page 296: Canon DM-MV600i, DM-MV630i, DM-MV600, DM-MV590 Digital Camcorder

Siemens Chart