cambium 450 update - be ip

Cambium 450 Update

August 2015

Cambium 450 Releases

Copyright 2015 Cambium Networks, Ltd. All rights reserved. 2

2013 2014 2015

Prior 1H 2H 1H

Released

In-process

R12 / R12.2

• 5.4 / 5.8 GHz (PMP 430 Interop)

• 2.4 GHz

• Connectorized SMs

• Fully Scalable (238 SMs)

• Up to 125 Mbps

• MIMO-B Operation

• 5, 10, 20 MHz Channels

• GPS Sync with Autosync

Product concepts described in this presentation may still be under investigation or development. Specific details, specifications and timelines are subject

to change without notice. Cambium makes no commitment or representation that such product concepts will be available as commercial products.

Dec, 2014

R13.0 / R13.1 / R13.1.3• 3.3 – 3.6 GHz

• 3.55 – 3.8 GHz

• 3.65 GHz FCC – Entire 50 MHz Support (LBT)

• Tx Power Increase for 3 GHz (+ 25 dBm)

• AP Spectrum Analyzer

• Syslog Improvements

• Dedicated multicast VC

• Improved Session Status

• MPLS Priority Mapping

R13.2 – Released November, 2014• PPS Improvements

• MIMO-A

• Progressive Rate Adapt

• VLAN priority bit configurable

• VLAN Re-marking

• Forced BER

• IPv6 Filtering, Prioritization

• GLONASS support

R13.3 - Released January, 2015• Read Only Login Options

• 5 ms frame length

• 7 MHz channels

• Zero Touch Configuration

• Import/Export Config file

• Security Features:

• HTTPS, SNMPv3

• FTP/TFTP and Telnet Disable

Continual Performance Evolution


More Frequency

Bands

256 QAM, MIMO-A

modulations

Processing

Improvements

Larger MTU Size

Feature Rich QoS

2.4 GHz

3.5 GHz

3.65 GHz

4.9-5.9 GHz

900 MHz

90 => 125 Mbps

Throughput

Higher PPS

1700 Byte MTU

Strict Priority

Support / Flexible

QoS methods and

bandwidth mgmt

Spectrum Agile Architecture

Enhanced Area-Averaged Capacity,

Better link stability

Higher Capacity Enterprise Links

Higher Capacity For VoIP-Intensive

Applications

MPLS Tag-Friendly

Controllable, Predictable

Performance

Cambium 450 Roadmap

2015 2016

1Q 2Q 3Q 4Q 1Q

Product concepts described in this presentation may still be under investigation or development. Specific details, specifications and timelines are subject

to change without notice. Cambium makes no commitment or representation that such product concepts will be available as commercial products.

R14.0 – August, 2015• PMP 450d – High Gain

integrated Parabolic dish

• PMP 450i – Wide Band • High Gain, Rugged Integrated SM

• SoC Architecture, PPS >35k

• Ifetel/Anatel Launch

• 4.9 & 5.8 GHz for FCC/IC/ETSI

R14.1• PMP 450i Interoperable with 450

• 5.1/5.2/5.4 for FCC and ETSI

• 2nd Ethernet port (PMP 450i)

• Support for Next Generation

management tools

R13.4 – June, 2015• Frame Utilization Statistics

• Security Banner

• RADIUS VSA for Zero Touch

Configuration

• RADIUS CoA Support

• MS-RADIUS Support

R15.0• PMP 450i - 900 MHz


Completed

Committed

In Planning

Candidate

CAMBIUM NETWORKS, LTD. CONFIDENTIAL RESTRICTED

R15.1• 15, 30 MHz Channel support

• Multicast Video Enhancements

• 256-bit AES

• Cisco ACS Support

• QoS Enhancements (4-level)

• Adaptive CIR

June, 2015

PMP 450d - Integrated Dish SM

• 25 dBi Integrated dish

• Works with existing power supplies

• Compatible with C3VoIP

• Extremely easy to assemble and deploy

• Reduce total cost of ownership:

– Single supplier

– Speed of installation

– Improved first install rates


Available

For Pre-Ordering!

Introducing PMP 450i and PTP 450i

• New Radio Design – Ultra Wide-band radio – 4900 to 5925 MHz support

– Opens up new frequency bands (4.9, 5.1 and 5.2)

– Includes Dynamic Interference Filtering

– Improved Radio Characteristics� Increased Transmit Power

� Better Receive Sensitivity

• New FPGA / SoC architecture– Platform evolution to new generation processor

– Expect to triple processing power of radio at launch

with path to >75k PPS

– Allows for wider channel support leading to more

throughput

• Ruggedized, IP66/67– Visually similar to PTP 650

– All metal construction

– Increased Reliability in harsh environments

– Optional ATEX/HAZLOC certified models available

• New Power scheme– 802.3at PoE compatible

– Aux port with PoE Output� Allows direct connection of camera or other equipment


Available

July 2015!

PMP 450i – High Gain Directional SM

• Integrated Flat Panel Antenna– 23 dBi Gain

– 12” x 12” panel

– 11° azimuth and elevation

– Compact design

– Easy Alignment and Installation

• New Tilt Bracket Assembly– Sturdy mounting bracket

– Reasonably priced

– Reduce installation time and

effort


PMP 450i – Connectorized Radio

• Connectorized Radio

– Access Point

� with current PMP 450 Sector

Antenna

� Same mounting points at PMP

450 AP, so can replace that

radio on same antenna if

necessary

– Connectorized SM

� Pair with any dual pol antenna

to maximize gain


PMP 450i – Integrated Access Point

• Integrated AP

– 90° Sector Antenna (3 dB rolloff)

– 16 dBi Gain

– Only 5.5 lbs

– Easy to install, compact design

– Front-to-back isolation not suitable for

frequency re-use


Cambium 5GHz Sector Antenna

• Performance Differentiation

– Will replace Integrated Access Point

– Integrated 2x2 Dual-Pol Sector

– Optimized for ABAB channel re-use

– Null-full

– Improved gain response across frequency and azimuth

– Easy to install

• Key Specifications

– 17 dBi gain

– 4.9 to 6.1 GHz

– 90 degree (3 dB beam width)

– 120 degree (6 dB beam width)

– Front/Back Ratio: > 32 dB


Available

January, 2016

450i AUX Port

• Multiple Uses / Single RJ-45 Port

– Secondary Data Port (video camera; Wi-Fi hotspot)

� 100BaseT

� PoE output (compliant with 802.3at)

– Sync

� Powers external GPS Receiver

� Receives sync signal OR generates sync signal (Remote AP applications)

� Receives GPS serial data (statistics)

– Alignment tone

450i SYNC Options

Today Capabilities Requirements

CMM4 Power and SYNC

Mixture of 450i, 450, 100

56V power supply

RJ-45 Adaptor cables

uGPS SYNC Custom RJ-45 to RJ-12

cabling


Roadmap Capabilities Requirements

CMM5 Supports GigE

Mix 650, 450i, 450, 100

56VDC Power Supply

GPS Module SYNC RJ-45 cable to AUX Port

450i POWER SUPPLY OPTIONS

Copyright 2015 Cambium Networks, Inc. All Rights Reserved. 13

AC Power Injector AC+DC Power Injector

Model # N000065L001A C000065L002A

Key Attributes Low-cost

Extended Temperature Range

Required for AUX port powering

48 VDC input

48 VDC output to resilient-mode

Supports longer cable runs

Provides power to TDM Module

Inputs 120-240VAC120-240VAC

48VDC

Temperature

Range

0° C to 40° C

32° F to 104° F

-40° C to +60° C

-40° F to 140° F

GigE Surge Suppressor

Copyright 2015 Cambium Networks, Ltd. All rights reserved.

Available

August

Model Number C000000L033A

Connectors 2 x RJ-45 1000BaseT

Power 56VDC nominal

(compatible with PMP/PTP 450i)

Protection Mode Line-to-Line and Line-to-Ground

Response time TBD

Surge Rating TBD

Operating Temperature -40° F (-40C) to +140° F (+60C)

Operating Humidity 100% condensing

Mounting Pole or wall-mount

Dimensions TBD

Weight TBD

Environmental

Protection

IP55

ATEX and HAZLOC Certified

ATEX (Atmospheres Explosibles) Equipment Group II

Category 3 / Zone 2

Gas Group IIC

Temperature Class T4


HAZLOC (Hazardous Locations)

Class 1 Location

Division 2

Gas Groups A, B, C, D

PMP 450i will also be available with ATEX / HAZLOC Certification

ATEX / HAZLOC Oil & Gas Applications

• Target Markets:

– PetroChem

– Utility (Generation and Transmission)

– Defence

• Solution:

– PTP 700 and 450i Series

– 4. 9 to 5.85 GHz

– ATEX and HAZLOC Compliant

– Dedicated SKUs

• Value Proposition

– Universal radio for all applications

� Non LOS

� Over Water

� Over long distance

� High RF interference

– Avoid expensive NEMA

– Established field reliability

– Easy to plan and install link

CAMBIUM NETWORKS LTD. CONFIDENTIAL RESTRICTED 16

• 900 MHz ISM band Operation– 902-928 MHz

– 5, 7 or 10 MHz channels supported

– Enhancement to 20 MHz channel support possible

• 2x2 MIMO design– Allows higher capacity

• Power Scheme - New for AP, Same for SM – AP will be 802.3at PoE compatible (56 VDC)

– SM will be 30 VDC, and can re-use existing PSU

• Next Generation Architecture– Utilizing PMP 450i architecture

– Includes Dynamic Interference Filtering

– Maximize Spectral efficiency� Using GPS timing and colocation with PMP 100 900 MHz

• Product Design Goal– Under similar RF conditions (i.e. high noise floor, other operating equipment in

the band, etc.), PMP 450 900 MHz is expected to provide 3 to 4 times the AP

capacity as PMP 100 900 MHz, using similar channel size

– In other words, deploying 7 MHz channels, you can replace PMP 100 900 MHz

and go from 4 Mbps capacity to 12-16 Mbps capacity

– Given clean spectrum, PMP 450 900 MHz can provide 40+ Mbps per sector

PMP 450i 900 MHz

Available

4Q 2015!


18

Traditional Fixed Filter Makes Radio Susceptible

to Neighboring Channel

Interference

Cambium’s Dynamic Filtering Wraps around selected channel,

Filtering out Interference from

Neighboring Channels

Selected Channel

Static Filter

Dynamic Interference Filtering

Spectrum

Copyright 2015 Cambium Networks, Ltd. All Rights Reserved

4.900 GHz

5.925 GHz

Clean

Channel

Selected Channel

Dynamic Filter

Static Filter

Interference from

Neighboring Channels

Impacting the Radio

RADIO

Dynamic Filter

Cambium 450 Platform Summary

• Industry leading PMP solution for critical networks

• Proven field reliability– Built upon our quality legacy (preceding product fielded for >10 years)

– >40 Year calculated MTBF (based on field returns and reliability testing)

• Extreme Scalability – Access Points can support many subscribers

– Many Access Points can be deployed at each site for maximal throughput

• OFDM MIMO– 2x2 MIMO provides high bandwidth for LOS access

– Single payload modulations provide link enhancement for nLOS and NLOS

• GPS synchronization– Maximize spectral efficiency, frequency re-use across network

– Minimize self-interference, maintain low and consistent latency

• Robust Roadmap for future platform enhancements– Serving customer needs for years to come


Thank You!


cambium 450 update - be ip

Documents