calling sametime, adding telephony to ibm connections
TRANSCRIPT
Adding telephony toIBM Connections ?
Social Connections IV - 30/11/2012 - Amsterdam
Calling Sametime
Introduction
What is SUT Lite
Sametime and Connections
SUT Lite and Connections
“What can I do with Sametime Unified Telefony
Lite within IBM Connections”
Introduction
What is SUT Lite
Sametime and Connections
SUT Lite and Connections
What is SUT Lite
Certified equipment
http://www-10.lotus.com/ldd/stwiki.nsf/dx/
Sametime_Unified_Telephony_Lite_Interoperability_Testing_Pro
gram
Architecture
Limitations
• Only point-to-point calls
• Only Sametime Connect Client is
supported
• Users cannot dial into a Sametime
meeting
• NAT traversal is not supported.
SUT vs. SUT Lite
Introduction
What is SUT Lite
Sametime and Connections
SUT Lite and Connections
Awareness
Using Sametime Proxy Server
Server Based
Using the Sametime Connect Client
Client Based
Client requirements
• Sametime Client 8.0.2 +• When using SSL:
• Sametime Connect 8.5 +• Lotus Notes 8.5.1 +
• Users must be logged into Sametime from the same machine as where they access Connections and with the same account
Check the Client
Server configuration
• Open the file profiles-config.xml• Locate the sametimeAwareness
element• Set enabled to true
• Restart Profiles
The Result
Introduction
What is SUT Lite
Sametime and Connections
SUT Lite and Connections
Start a call
Calling
“What can I do with Sametime Unified Telefony
Lite within IBM Connections”
?
Introduction
What is SUT Lite
Sametime and Connections
SUT Lite and Connections
Configuring SUT Lite
Configure the server
• Install the SUT Lite license• Enable SUT Lite on the Media
Manager from the System Console
• Optional: disable encryption
Enable users
• Enable SIP Trunk capability on the Media Manager policy
Dialplan
Dial String SIP endpoint Phone/Device
3118255517X Sametime Sametime Softphone
316XXXXXXXX FreePBX PBX (soft)phone
@mcu.silverside.nl MCU Media Server Video Conferencing
Configure the SIP Proxy
• In the System Console open the configuration of the SIP Proxies and Registrars of the Media Server
• Open the Proxy Administration
Define the rules
Configure the conditions
Define the rules
Set the destination
Define the rules
Example:
Route all calls where the SIP Request URI starts with “+316” to 192.168.0.214 via TCP
Define the rules
Example:
Route all incoming calls from 192.168.0.214 to the Media Manager via TCP.
?