cable beam system - agam group, ltd. · pdf fileand internal cable installation ¡ no...
TRANSCRIPT
Span 40’ Without Sag
TurnbuckleGusset Plate
A
Components:
ReinforcedIn-Line Connector
B
3/16” Galvanized Aircraft Cable
C
Small Eye Jaw
D
Large Turnbuckle
E
¡ No S
tructura
l Sag
¡ SEG Fab
ric Read
y
¡ Span
40’ Between
Posts
SEG Fabric Ready
¡ Pre-assembled modular sections allow for efficient shipping, setup and take down
¡ Fully customizable with most AGAM extrusions to any length up to 40’ and any height up to 8’
¡ AGAM handles all structural design, measurement, and internal cable installation
¡ No structural sag¡ SEG fabric ready¡ Made in the USA¡ Span up to 40’¡ Load chart available
upon request
View Technical Catalog
Strength and LengthUsing a combination of galvanized 3/16” aircraft cable, gusset plates,
reinforced in-line connectors, and high-strength turnbuckles, the AGAM
Cable Beam System allows extrusion spans up to 40’ between
posts — without structural sag. AGAM even handles
all structural design, measurement, and
internal cable installation.
Easy Shipping and AssemblyWith pre-assembled beam sections, shipping and show
floor assembly is quick and easy. Just remove the beam
sections from the shipping crate and connect the
sections using a wrench and hex key.
A
B
C
D
E
6093 mm (240”)
2029 mm (80”)
Customizable Height
Up To 8’
Example of 20’ Span
Span Any Length Up To 40’Cable beam spans are built with modularity and offer the flexibility of customization. Determine the overall beam length/height and AGAM will handle all structural design, measurement, and internal cable installation. Simply pull the sections out of the crate and assemble the frame.
9144 mm (360”)
2286 mm (90”)
Customizable Height
Up To 8’
Example of 30’ Span
12190 mm (480”)
2438 mm (96”)
Customizable Height
Up To 8’
Example of 40’ Span
Exhibit Hall Entrance
Design IdeasWith the freedom to span distances up to 40’ between posts, let the once-impossible become a reality.
40’ x 40’ Exhibit 20’ x 30’ Exhibit
6695 Business ParkwayElkridge, MD 21075 USA
1.410.796.6400 tel1.800.645.0854 tel
1.410.796.0589 fax 1.800.348.2426 fax
www.agam.com [email protected]
© Copyright 2017 AGAM Group, Ltd. All Rights Reserved. CIP-120 (2017.07)