cabcon datacentre solutions 2015aff0214380ca87afcb09-7f4520562d2e8d15cc5fa9cda27e80e9.r89.cf… ·...

Data Centre Solutions

www.cabcon.co.uk

UK +44 (0)1189 122980IRE (00353) 1 629 2640

an acal group company

Cabcon


Cabcon are a specialist distributor of copper, fibre, power, security, active and

cable management products for the communications industry. We are

focussed on developing and working with key technology partners to provide a

quality end to end solution for all communication requirements. We have

developed a wide range of products and services for Data Centres based

around the need to provide high performance technology within a high density

cabling environment.

Cabcon are a growing presence in the UK Data Centre market, offering an

extensive range of cabling products and services coupled with an

experienced sales and product management team dedicated to providing a

high level of customer service.

About Us

Products and Services

www.cabcon.co.uk

Pre-terminated Copper / Fibre Cabling

Bespoke made to length copper and fibre patch cables

OM3, OM4, OS2 pre-terminated fibre cables

Cat6 and Cat6A copper single or multi-core cabling solutions

UK and overseas manufacturing facility

Cabcon offer a tailor made fibre optic and copper pre-terminated cable service designed to meet your exact length, connector and performance requirements. We offer duplex and multicore fibre optic cables, pre-terminated single and loomed copper cables and a range of active optical cables (AOC) cables capable of up to 40Gb transmission speeds. All leads are 100% factory tested in conformance to the highest quality standards.

+44(0) 1189 122980 www.cabcon.co.uk [email protected] w @


Cabcon


Cabcon


Molex High Density Fibre Optic Solutions

Cabcon are pleased to announce the launch of the Molex Xtreme Density (XD) high density fibre solution. The Xtreme Density system is a configurable rackmount unit for storing and terminating incoming fibre cable. The chassis is available in a 1u 5 cassette module and 2u 12 cassette module chassis capable of delivering 124 to 288 fibres via 24 fibre Plug and Play LC/MTP modules connected via 24 fibre MTP/MTP optical cables.

Plug and Play high density solution

24 Fibre LC/MTP cassettes provide 124 fibres (1u) or 288 fibre (2u)

Low loss OM3, OM4 and OS2 cassettes as standard

24 Fibre MTP/MTP cable assemblies – reduced cable weight and footprint


Metz DCCS2 Cabling Solutions

The Metz Connect Data Centre Compact Solution edition 2 (DCCS2) is a flexible high density copper and fibre optic cabling solution. The copper can be pre-terminated or terminated on site via a cassette based system offering 6 x RJ45 outlets per module. The fibre optic solution is pre-terminated and connected via an MPO connection. The modular panel allows mixed copper and fibre optic connectivity to suit the client’s requirements.

High density Cat6A copper solution. Up to 48 Cat6a ports in a 1u panel

High density fibre optic cabling. Up to 96 fibres in a 1u panel

Pre-configured plug and play solution

Supports 10Gb ethernet

1u panel can be mixed with either copper or fibre modules

Fibre Interconnect

Cabcon offer a range of fibre interconnect products including active optical cables (AOC), direct attached cables (DAC) and fibre optic transceivers. We offer products capable of transmission speeds of up to 100GB Ethernet to keep up with the current and future demands of the Data Centre environment

Fibre optic Transceivers

Active optical cables (AOC)

Direct attach cables (DAC)

1 to 100Gbe CXP/CFP/QSFP/SFP/SFP+


Cabcon


Co-location and Open Rack Systems

Cabcon offer a variety of rack solutions to support your cabling infrastructure in the Data Centre. Prism’s Big ‘O’ advanced high density patching frame offers a dynamic solution to the challenges of cable management. It is designed to meet the evolving demands of high density cabling applications in the Data Centre environment. The Hoffmann open rack 2 frame and 4 frame system provides versatility with adjustable frames (4 frame only) to control the depth of the rack. Co-location cabinets range from 2 to 4 compartments which are designed to provide maximum utilisation of space.

Big ‘O’ High density patching frames up to 47u in height and 1200mm depth

Co-location racks from 2 to 4 compartment up to 47u

Hoffmann open rack frames 45u double vertical frame and 4 frame with adjustable depth


Powercords

Cabcon offer one of the largest ranges of power cords and extension cables in the UK. We have over 200 lines and 500k cord sets in stock ranging from UK, European and International plug tops plus a wide range of IEC jumper cabling solutions. We have the facility to manufacture bespoke cord sets tailored to meet your exact requirements through our UK and overseas factories. All leads are fully approved and manufactured to the highest standard.

UK, European and International cord sets

International IEC jumper cabling

Full International approvals / huge stocks

IEC locking cords

Bespoke made to order cable service

Power Distribution / Management

Cabcon specialise in supplying standard and bespoke power management systems from some of the UK’s most trusted and reliable manufacturers. We offer a wide range of products including standard and intelligent power distribution strips, power monitoring equipment, in-rack cooling and DCIM systems. Our technology partners are focussed on tailored manufacturing to meet each client's needs and provide unbeatable performance in the Data Centre.

Standard and bespoke power distribution strips

Power monitoring equipment

Intelligent power

Software management systems


Cabcon


Airflow Management

Cabcon offer a number of air flow management solutions for data centres. The Prism raised access floor tile systems are the ideal solution for Data Centre, server farm and hot spot cooling. Triad’s patented pending high density airflow panel offers up to 65% airflow, delivering 2-3 times more CFM than industry standard perforated airflow panels. If the site is constrained by cooling capacity, the installation of thermal partitions will allow more equipment to be installed saving on energy bills.

We also offer the Koldlok system which utilises existing brush technology and combines it with a sheet of flexible membrane to provide an almost impenetrable air barrier providing the ultimate solution for raised floor cable entry.

Vented floor tiles with up to 65% air flow

Thermal partitioning designed for energy saving

Koldlok raised floor brush system

Solid or glass door options

Overhead roof solutions

Fully enclosed glide track system

Retro-fittable

Can be fitted to third-party enclosures

Solution can be reinstalled as Data Centre grows

Cold Aisle Containment

The Prism system is based on the principle of complete separation of hot and cold air, by enclosing the cold aisle across the top of the cabinets with roof panels, and both ends of the aisle with sliding doors.

By doing this the cold aisle is treated as an extension of the floor void, reducing hot spots, re-circulation and wild temperature differences. The thermal differential between the top and bottom of racks is reduced to 2 to 3 degrees, optimising the reliability of servers at any position in the rack.

Prism also provide 90% vented floor tiles to maximise the air flow into the corridor. The hot air is dispersed into the room to become the hot aisle and returned to the CRAC units. In the cold aisle the environment is more consistent and 95% of the cold air from the CRAC units is directed through the equipment. This allows the inlet temperature to be increased significantly, saving power and energy consumption, but still allowing the equipment to operate efficiently. Free cooling can be used during a longer period which leads to a considerable reduction of the energy expenditure.



Cabcon

Cabcon - Acal BFi UK Ltd3 The Business CentreMolly Millars LaneWokinghamBerkshireRG41 2EYEngland

Ireland OfficeUnit 14GMaynooth Business CampusMaynoothCounty KildareIreland

Cabcon is a division of Acal BFi UK Ltd 3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire RG41 2EY. Registered in England No.01803787

Tel: +44 (0)1189 122980Fax: +44 (0)1189 776095

[email protected]

www.cabcon.co.uk

Tel +353 1629 2640Fax +353 1629 [email protected]

Ref:DC0215V1

Get in touch . . . .

Leading Brands . . . .

IP Cameras

Other solutions include:

Cabcon offer a large range of IP cameras which can be used for extra Data Centre security. The range includes high definition indoor and outdoor IP cameras and IP dome cameras capable of clear and precise imaging up to a maximum of 5 mega pixels. Cameras can be supported with Network Video Recorders capable of recording all channels at 25fps at full HD simultaneously.

Minimum of 1080 x 1920 resolution

High definition IP cameras up to 5 mega pixels

Record all channels at 25fps in full HD onto either NVR’s or PC’s using CMX software

Full range of dome and bullet in both indoor and outdoor option with IR illumination

Liebert UPS systems

Legrand EZ-Path Fire Suppression

CISCO Compatible Cables

Environmental Monitoring

Overhead Raceway

56 Volt Ultracapacitor Modules for UPS

R

Raised Floor Airflow Management

R

one company a world of innovation

BLANKINGPANELS an acal group company

CabconR


CabconData Centre Solutions

cabcon datacentre solutions 2015aff0214380ca87afcb09-7f4520562d2e8d15cc5fa9cda27e80e9.r89.cf… ·...

Documents