ca 11 r11€¦ · · 2009-10-20ca-11 report 01 - ca-11 (arts) ----- automated rerun and tracking...

CA 11 r11 – What's New and Exciting

John Moore

Terms of This Presentation

This presentation was based on current information and resource allocations as of October

2009 and is subject to change or withdrawal by CA at any time without notice.

Notwithstanding anything in this presentation to the contrary, this presentation shall not serve

to (i) affect the rights and/or obligations of CA or its licensees under any existing or future

written license agreement or services agreement relating to any CA software product; or (ii)

amend any product documentation or specifications for any CA software product. The

development, release and timing of any features or functionality described in this presentation

remain at CA’s sole discretion. Notwithstanding anything in this presentation to the contrary,

upon the general availability of any future CA product release referenced in this presentation,

CA will make such release available (i) for sale to new licensees of such product; and (ii) to

existing licensees of such product on a when and if-available basis as part of CA maintenance

and support, and in the form of a regularly scheduled major product release. Such releases

may be made available to current licensees of such product who are current subscribers to CA

maintenance and support on a when and if-available basis. In the event of a conflict between

the terms of this paragraph and any other information contained in this presentation, the

terms of this paragraph shall govern.

2 October 2009 CA 11 r11 - What's New and Exciting Copyright © 2009 CA

For Informational Purposes Only

Certain information in this presentation may outline CA’s general product direction. All

information in this presentation is for your informational purposes only and may not be

incorporated into any contract. CA assumes no responsibility for the accuracy or completeness

of the information. To the extent permitted by applicable law, CA provides this document “as

is” without warranty of any kind, including without limitation, any implied warranties or

merchantability, fitness for a particular purpose, or non-infringement. In no event will CA be

liable for any loss or damage, direct or indirect, from the use of this document, including,

without limitation, lost profits, lost investment, business interruption, goodwill, or lost data,

even if CA is expressly advised of the possibility of such damages.


Agenda> Online

> Run/Rerun/Restart

> Tracking

> DBAS

> Interfaces

> Other Things

October 2009 CA 11 r11 - What's New and Exciting Copyright © 2009 CA4

OnlineNew Features

Show Service Pack Number

> The service pack number will be available in

initialisation message

U11D-0230-10 CA-11 release r11 at

maintenance level SP00

> And on the main menu for the ISPF interface.


NJE Support> CA 11 WA ISPF interface

Specification of an NJE node name– Retrieve JOB information from Specified node.

The NJE jobs restart information

– displayed and may be altered

Submitting system controls the restart of NJE jobs– Same as local jobs

Eliminates need to logon to the NJE system

Uses CA GTS to communicate between NJE systems.


NJE Support> Scheduling Products

Schedulers can pass NJE node name to CA 11 WA API

Schedulers can retrieve JOB information from Specified node.

Schedulers can update restart information on NJE node


Basic NJE Environment

October 2009 CA 11 r11 - What's New and Exciting Copyright © 2009 CA

DallasTexas

NJEDALTXGTSDALLASTEXAS

SeattleWashington

NJESEAWAGTSSEATTLEWASHTN

BangorMaine

NJEBNGMEGTSBANGORMAINE

CA 11r11

ARTSGTS CA 11

r11ARTS

GTS

CA 11r11

ARTSGTS

JOBSubmission

10

Audit>New audit for all changes

The online interfaces

Certain batch jobs – Client changes

>Before and after images

Detail of changes made

>Batch Report for Audit


Remove ISPLINK Requirement for ISPF> Eliminate ISPF Link step in install

> Dynamically Load ISPF modules and call directly

> Simplifies installation

> Eliminates re-link when ISPF version changes.


ISPF Subsystem Selection>Change the CA 11 WA Subsys without

exiting ISPF dialog.

>New option

Display list of active CA 11 WA

subsystems.

Allow the selection of desired subsystem.


Run, Rerun, RestartNew Features

Flexible Restart Step Selection>CA 11 WA restart selection

Allow for multiple individual steps

Allow for step ranges

>Currently only a single range can be

specified.


Flexible Restart Step Selection> S - Set Starting step (CC honored)

> E - Set Ending step (CC honored)

> O - Set Starting & ending step (CC honored)

> F - Set Starting step (CC not honored)

> L - Set Ending step (CC not honored)

> R - Set Starting & ending step (CC not honored)


Reduce Redundant Steps in Rerun>Change to non-restartable step

processing

Identify dependant steps

Only run steps required to restart failed

step.

Other steps skipped


Reduce Redundant Steps14.02.02 JOB06145 -JOBNAME STEPNAME PROCSTEP RC 14.02.02 JOB06145 -REDUCERS RMS 00 14.02.02 JOB06145 -REDUCERS TEST001 00 14.02.03 JOB06145 -REDUCERS TEST002 00 14.02.03 JOB06145 -REDUCERS TEST003 00 14.02.03 JOB06145 -REDUCERS TEST004 00 14.02.04 JOB06145 -REDUCERS TEST005 00 14.02.04 JOB06145 CSV003I REQUESTED MODULE IEFBR14X NOT FOUND14.02.04 JOB06145 CSV028I ABEND806-04 JOBNAME=REDUCERS STEPNAME=TEST00614.02.04 JOB06145 IEF450I REDUCERS TEST006 - ABEND=S806 U0000REASON=00000004 913 TIME=14.02.0414.02.05 JOB06145 U11-656 JOBNAME=REDUCERS,STPROC=

,STSTEP=002 ,AUTO SETUP PARMS14.02.05 JOB06145 -REDUCERS TEST006 *S806 14.02.05 JOB06145 -REDUCERS TEST007 FLUSH 14.02.05 JOB06145 -REDUCERS TEST008 FLUSH 14.02.05 JOB06145 IEF404I REDUCERS - ENDED - TIME=14.02.0514.02.05 JOB06145 U11-607

JOBNAME=REDUCERS,PRODJOB#=0001,TERMINATED UNSUCCESSFULLY14.02.05 JOB06145 -REDUCERS ENDED. NAME-BOGUE

TOTAL TCB CPU TIME= .00 TOTAL ELAPSED TIME= .114.02.05 JOB06145 XYZ107I JOB ENDED: REDUCERS BOGUE14.02.05 JOB06145 $HASP395 REDUCERS ENDED


Reduce Redundant StepsCA-11 REPORT 01 - CA-11 (ARTS) ------ AUTOMATED RERUN AND TRACKING SYSTEM

U11-001 CA-11 - PARM RECEIVED FOR JOB REDUCERS - PARM=P

U11-055 RESTART REQUESTED - START PROC/STEP= /002 END PROC/STEP=

/ RETURN CODE=0000

U11-109 * PROC-STEP= STEP=TEST001 POSTED WITH CC=0000

U11-031 * PROC-STEP= STEP=TEST002

U11-047 *** - PROC/STEP= /TEST003 WILL BE SKIPPED

U11-031 * PROC-STEP= STEP=TEST004 *** USER ** NOT RESTARTABLE

***

U11-031 * PROC-STEP= STEP=TEST005 *** USER ** NOT RESTARTABLE

***

U11-031 * PROC-STEP= STEP=TEST006 *** CA-11 * NOT RESTARTABLE

***



U11-010 CA-11 - 'R' PROCESSING COMPLETE FOR JOB REDUCERS


Step Level Backout

> U11PRE has been changed to allow dataset

maintenance for a single step.

Similar to “R” processing but dataset

maintenance may be limited to a single step.

Also accepts an ending step.


U11PRE Report CA-11 REPORT 03 - CA-11 PRE-JOB PROCESSING

U11-020 SYSIN CONTROL CARD = 'B,BACKTEST,STEP2 '

U11-001 CA-11 - PARM RECEIVED FOR JOB BACKTEST -

PARM=AB,BACKTEST,STEP2

U11-023 USAGE PARM CHANGED FROM TO A

U11-031 * PROC-STEP= STEP=STEP2

U11-067 DELETE SCHEDULED FOR DSN = BOGJE03.TSTDSN41

U11-067 DELETE SCHEDULED FOR DSN =

APC.DEVJT.CHDB000.GA1.AD11.RXX.G0025V00

U11-069 IDC0550I ENTRY (A) BOGJE03.TSTDSN41 DELETED

U11-069 IDC0001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0

U11-069 IDC0550I ENTRY (A) APC.DEVJT.CHDB000.GA1.AD11.RXX.G0025V00

DELETED

U11-069 IDC0001I FUNCTION COMPLETED, HIGHEST CONDITION CODE WAS 0

U11-069 IDC0002I IDCAMS PROCESSING COMPLETE. MAXIMUM CONDITION CODE

WAS 0

U11-010 CA-11 - 'B' PROCESSING COMPLETE FOR JOB BACKTEST

END OF REPORT 03 - TOTAL ITEMS LISTED= 21


Do Not Propagate Condition Codes>Normally, during a Restart, condition

codes are propagated

For steps that have executed prior to the

restart step

>New option, will prevent this propagation


RD=NR>In CA 11 WA a Step can be marked as

Non-Restartable by including a

//CA11NR DD DUMMY card

>We will now also support a EXEC

parameter of RD=NR.

//A EXEC PGM=PAYROLL,RD=NR


Allow More Than One HSM Volume>The HSMVOL parameter defines HSM

Archived Volume name

>HDEL instead of restore and delete

>Was limited to one value

>Now will accept up to 8.– HSMVOL=(MIGRAT,MIGLV1)


TrackingNew Features

Disaster Recovery Auto Setup>Updates the database

Before each step executes.

With the last restartable step.

Job “unsuccessful” until job completes

>In the event of a system failure

CA 11 WA database will contain the recommended restart

step.

Job is set for restart.


Maintain Dynamically Allocated Datasets>CA 11 WA will detect dynamically

allocated datasets.

>Add them to the CA 11 WA database.

>Will be maintained same as datasets

that are allocated in the JCL.


Maintain Dynamically Allocated Datasets//$$$$$$@1 EXEC PGM=U11RMS,PARM='P'

//STEP1 EXEC PGM=TESTCC,PARM='0000'

//TESTDSN DD DSN=MORJA01.TESTDSN,DISP=(,CATLG,DELETE),

// DCB=(BLKSIZE=3120,LRECL=80,RECFM=FB),

// SPACE=(TRK,(1,1)),UNIT=3390,VOL=SER=TSO79A

//TESTGDG DD DSN=MORJA01.GDGTEST(+1),DISP=(,CATLG,DELETE),

// DCB=(BLKSIZE=3120,LRECL=80,RECFM=FB),

// SPACE=(TRK,(1,1)),UNIT=3390,VOL=SER=TSO79A

//STEP2 EXEC PGM=IKJEFT01,TIME=1439,DYNAMNBR=100,REGION=2M

//SYSEXEC DD DISP=SHR,DSN=BOGJE03.SOURCE.REXX

//SYSTSPRT DD SYSOUT=*

//SYSTSIN DD *


Maintain Dynamically Allocated Datasets

//SYSTSIN DD *

%DYNALLOC ALLOC DA(BOGJE03.TSTDSN41) -

NEW CATALOG LRECL(80) BLKSIZE(8000) SPACE(1,1) -

TRACKS RECFM(F,B) UNIT(3390) DSORG(PS)

%DYNALLOC ALLOC DA(BOGJE03.TSTDSN42) –

NEW CATALOG LRECL(80) BLKSIZE(8000) SPACE(1,1) -


%DYNALLOC ALLOC DA(APC.DEVJT.CHDB000.GA1.AD11.RXX(+1) ) -

NEW CATALOG LRECL(80) BLKSIZE(8000) SPACE(1,1)



Maintain Dynamically Allocated Datasets

CA-11 REPORT 01 - CA-11 (ARTS) ------ AUTOMATED RERUN AND TRACKING

U11-055 RESTART REQUESTED - START PROC/STEP= /001 END PROC/STEP= / RETURN CODE=0000


U11-067 DELETE SCHEDULED FOR DSN = MORJA01.TESTDSN

U11-040 ON RESTART GDG CHANGED TO DSN=MORJA01.GDGTEST.G0639V00 DDNAME=TESTGDG

U11-067 DELETE SCHEDULED FOR DSN = MORJA01.GDGTEST.G0639V00




U11-067 DELETE SCHEDULED FOR DSN = APC.DEVJT.CHDB000.GA1.AD11.RXX.G0024V00

U11-010 CA-11 - 'R' PROCESSING COMPLETE FOR JOB DYNALLOC


Support the Use of Abender Programs

> We will treat steps that execute certain

programs as not restartable.

ABENDPGM=(IEFBR11,BLOWUP)

– Config File or RMS parameter

Ignored for Restart

Auto F for Production


DBASNew Features

Allow Attributes for Purge and Report Files

> The Maintenance task will allow the SPACE

parameter in the definitions for the PURGE and

REPORT files and will not require the UNIT

parameter when SMS parameters are specified.

RPRTSPACE=(08000,(01000,00000))

RPRTUNIT=3390

RPRTSTOR=MORSTOR

PURGSPACE=(05550,(01000,00000))

PURGUNIT=3390

PURGSTOR=MORSTOR

Space parameters have the same syntax as the JCL SPACE

parameter


Datacom Database Space Monitor>Datacom space monitor for CA 11 WA

>DBAS Init Deck option to specify the system DBID

Default is DBID=1000

>Option to specify a warning percentage

DBWARN=nnn – When an Area reaches the specified percentage, CA 11 WA

issues a warning message.


Start up and Daily Display

U11D-8200-8 SPACE MONITOR 08.281 17.08.38 XE79

AREA TOTAL TOTAL USED

NAME DBID TRACKS BLOCKS BLOCKS FULL

---- ---- -------- -------- -------- ----

IXX 0601 225 2700 333 12%

JOB 0601 75 525 20 3%

STP 0601 75 525 1 0%

DSN 0601 525 3675 1 0%

JHF 0601 75 525 2 0%


When DBWARN is exceeded.

> U11D-8200-5 SSN=CAL7 DBID=0601 AREA=STP

AT 91% USED

> U11D-8200-6 EXTENTS=16

DSN=APC.LV2CA11.DCAD11.SP02.XE87.STP60

> U11D-8200-7 VOLUME=MVXE87 FREE

CYLINDERS=0497


“=DISPLAY SPACE” command > Same Display as at Startup, Plus:

AREA FREE

NAME CYLS VOLUME EX DSN

---- ---- ------ -- ---

IXX 0497 MVXE87 02 APC.LV2CA11.DCAD11.SP02.XE87.IXX601

JOB 0497 MVXE87 16 APC.LV2CA11.DCAD11.SP02.XE87.JOB601

STP 0497 MVXE87 16 APC.LV2CA11.DCAD11.SP02.XE87.STP601

DSN 0497 MVXE87 07 APC.LV2CA11.DCAD11.SP02.XE87.DSN601

JHF 1794 TSO87E 01 APC.LV2CA11.DCAD11.SP02.XE87.JHF601

WARNING PERCENTAGE IS 80%

NEXT MONITOR CHECK COUNT: 09 MIN


InterfacesNew Features

Scheduling Product Condition Code Support>New Scheduling System API

Allows a job to be set for restart from any scheduling package.

Called with JOB name, and procstep.stepname or step number

AUTO-SETUP will be performed for the job.

>A new RMS parameter

Deactivates condition code processing in CA 11 WA.

– SCHCC=Y


Other ThingsNew Features

Remove WTOR at Shutdown>SHUTDOWN NOW

No “are you sure” question

Still prompts the operator in the event

that there are jobs currently using CA 11

WA services.

It must be issued from the OS Console.


Add Subsystem Name to Nondeletable, Highlighted Messages> The CA 11 WA subsystem name will be added to the

end of Non-Deleteable, Hilighted messages.

> Helps identify which CA 11 WA the message came

from when running multiple CA 11 WA subsystems

on a system.

U11D-0450-1 VERIFY CA-11 DBAS SHUTDOWN (Y/N)

SSN=CAL7


Health Checker

> CA WA Restart Option interfaces IBM Health

Checker.


Health Checker


Summary> Online

> Run/Rerun/Restart

> Tracking

> DBAS

> Interfaces

> Other Things


Questions & Answers

ca 11 r11€¦ · · 2009-10-20ca-11 report 01 - ca-11 (arts) ----- automated rerun and tracking...

Documents