c2070-587.examcollection.premium - gratis exam · c2070-587.examcollection.premium.86q ... up a...

C2070-587.Examcollection.Premium.86q

Number: C2070-587Passing Score: 800Time Limit: 120 minFile Version: 22.1

http://www.gratisexam.com/

Exam Code: C2070-587

Exam Name: IBM FileNet P8 V5.1, Deployment Professional

Braindumps

QUESTION 1While configuring the LDAP settings in Configuration Manager to point to an Active Directory server, an installerclicks the Test LDAP Connection button. A dialog box appears stating the test has failed. Which MicrosoftWindows Server event log would you check to help determine the cause?

A. System event logB. Directory Service event logC. Active Directory Server event logD. Lightweight Directory Access Protocol event log

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2A P8 Administrator from a company needs to turn on IBM FileNet Content Engine tracing for the followingservers: ce_clu_server3, ce_clu_server1. Please refer to the screenshot for more information.

What level of tracing should be configured to generated the desired logs?

A. Domain level.

B. Site level such as Initial Site.C. Individual server level such as ce_clu_server3 and ce_clu_server1.D. Virtual servers level such as W2K8-dP8nd2Node1 and W2K8-dP85ndNode01.

Correct Answer: CSection: (none)Explanation


QUESTION 3A P8 administrator fails to logon to an IBM FileNet P8 V5.1 system when using Workplace XT. FileNetEnterprise Manager (FEM) is able to connect to P8 without issues. The administrator would like to use log4jwith Workplace XT to further troubleshoot the issue. In which directory should the log4j file be placed so thatlogging is enabled for Workplace XT?

A. <install path>/FileNet/Config/AEB. <install path>/FileNet/Config/WebClientC. <install path>/FileNet/CEClient/config/samplesD. <install path>/FileNet/AE/CE_API/config/samples



QUESTION 4A consultant has installed an IBM FileNet Process Engine client fix pack on a 3 node, horizontally load balancedApplication Engine installation. After an interactive installation, some users are seeing the same problemintermittently, rather than constantly, as it was before the fix pack was installed. What could still be the issue?

A. The fix pack did not correct the problem.B. The fix pack install script did not deploy the war file properly.C. The fix pack installer did not delete an application server temp directory.D. The fix pack install script did not delete an Application Server temp directory.



QUESTION 5A P8 Administrator of a company would like to use vwtool to run a trace on region 2. What would be the correctcommand to switch to region 2?

A. vwtool -region 2B. vwtool:1>region 2C. vwtool:2:>region 2D. vwtool:1>regions 2



QUESTION 6A security administrator has been assigned the task of creating a Content Engine bootstrap account. Theaccount must be able perform the following task: establish a connection to the application server, access theJNDI lookup tree and lookup the data source for accessing the GCD. What other function does the ContentEngine bootstrap account need to perform?


A. Create the data sources for the GCD.B. Startup the Content Engine application.C. Startup the Content Engine background tasks.D. Startup the Content Engine application server.



QUESTION 7An IBM client is planning the implementation of a IBM FileNet P8 Platform and needs to identify the solutioncomponents. What are the IBM FileNet P8 V5.1 core components?

A. Content Engine, Process Engine, and Application EngineB. Image Manager, Process Engine, Application Engine, Workplace XT and Rendition EngineC. Content Engine, Process Engine, Application Engine, Workplace XT, and Rendition EngineD. Content Engine, Process Engine, Application Engine, Workplace XT and Enterprise Records



QUESTION 8A customer is planning to implement an IBM FileNet P8 Platform environment and needs to identify thedifferent roles that are recommended to complete the implementation. What are the suggested installation rolesas described in the IBM FileNet P8 Installation and Upgrade Worksheet?

A. Database administrator, Application server administrator, and FileNet P8 administratorB. LDAP administrator, Database administrator, Application server administrator, FileNet P8 administrator, and

E-mail administratorC. Installation administrator, Security administrator, Database administrator, Application server administrator,

and FileNet P8 administratorD. Installation administrator, Information Technology administrator, Security administrator, Database

administrator, Application serveradministrator, FileNet P8 administrator, and E-mail administrator

Correct Answer: DSection: (none)Explanation


QUESTION 9A customer is designing a highly available IBM FileNet P8 system with both horizontally and vertically scaledimplementations of Content Engine and Workplace XT. The customer desires to use a hardware load balancerin front of a series of HTTP proxy servers to spread all HTTP/HTTPS traffic. Additionally, a hardware loadbalancer will be used to spread traffic across multiple Process Engine servers. The hardware load balancerchosen in this configuration is configured to use a dynamic DNS server. What must be configured in order tofacilitate proper high availability functionality of the P8 environment?

A. Session Affinity must be configured for the Process Engine servers.B. The Content Engine EJB ports must be configured in the load balancer.C. Time-To-Live (TTL) settings in the application server cluster must be configured.D. FileNet Enterprise Manager must be configured to connect via the load balancer.



QUESTION 10A consultant is completing a IBM FileNet P8 system installation and is configuring FileNet Content FederationServices for Image Services (CFS-IS) for best performance. Which of the following is NOT true whenincreasing the number of replication workers?

A. Increasing the number of replication workers requires an increase in batch size in a farmed environment.B. Increasing the number of replication workers increases the number of connections to the IBM FileNet Image

Services server.C. Increasing the number of replication workers increases the Java virtual machine (JVM) memory that is used

on the application server.D. Monitoring the system vitals such as CPU, memory and throughput rates is essential. As system resources

are maxed out, increasing thenumber of workers does not increase performance and may decreaseperformance.

Correct Answer: ASection: (none)Explanation


QUESTION 11A customer is deploying Content Engine on Oracle WebLogic. For performance reasons, what value must you

set the parameter Max Group Membership Search Level in the Oracle WebLogic Console to control searcheswithin the authentication provider?

A. 1B. 0C. -1D. 75% of max users



QUESTION 12An IT Administrator is creating a Microsoft Windows operating system account for thece_appserver_install_user. What are the minimum required permissions that need to be set for this account?

A. Read permissions for directories on devices or drives for external file storage.B. Create permissions for directories on devices or drives for external file storage.C. Create, read and write permissions for directories on devices or drives for external file storage.D. Read, write and modify permissions for directories on devices or drives for external file storage.



QUESTION 13An IT Administrator is configuring the default file-creation permissions for various IBM FileNet Content Engineusers on a UNIX server. What umask setting is required for the user running Content Engine setup(ce_install_user)?

A. u=rwx,g=,o=B. u=rwx,g=rwx,o=C. u=rwx,g=rw,o=rwD. u=rwx,g=rwx,o=rwx



QUESTION 14An IBM FileNet P8 Administrator for a company would like to secure files and folders in the Content Engine filestorage area. Which user should the Administrator use to logon to the operating system to achieve this task?

A. ce_os_userB. ce_install_userC. config_mgr_user

D. ce_appserver_install_user



QUESTION 15A client is planning on using Centera as their fixed content device. If the number of access nodes is to be three,what should the Maximum Connections be set to?

A. 3B. 30C. 45D. 99



QUESTION 16A customer is trying to create an object store using a database storage area. When attempting to create anobject store, the following error occurs in IBM FileNet Enterprise Manager.

How would the customer overcome this error to create the object store?

A. Create a new database.Use the database name as the Object Store Data Source name in the CreateObject Store wizard.

B. Create a new database.Create a new Object Store Data Source using FileNet Configuration Manager.Usethis new Object Store Data Source name in the Create Object store wizard

C. Create a new database.Set an application server variable to map the datasource name.Use this applicationserver variable as the Object Store Data Source name in the Create Object store wizard.

D. Drop the database pointed by the Object Store datasource used in the Create Object store wizard.Create anew Object Store Data Source using FileNet Configuration Manager.Use this new Object Store Data Sourcename in the Create Object store wizard.

Correct Answer: BSection: (none)

Explanation


QUESTION 17A customer is setting up a file storage area in an object store using IBM FileNet Enterprise Manager (FEM).They would like to verify that the file storage area is setup correctly. What should be checked to ensure that thefile storage area is setup correctly?

A. Look for the file "fn_stakefile.xml" and the subdirectories "content" and "inbound" in the file store directory.B. Look for the subdirectories "content" and "inbound" in the file store directory.C. Look for the file "content" and "inbound".D. Look for file "fn_stakefile.xml".



QUESTION 18As part of a new IBM FileNet P8 installation an installer is configuring SSL between the Process Engine and theContent Engine. The installer runs the following command to import the CA certificate to the Java keystore:\PE_installation_directory\java\jre\bin\keytool -import -file <cert_file_name> -alias <alias> -keystore cacerts -storepass <password> What is the default password?

A. cacertB. changeitC. passwordD. change$_this_obnoxiou$_passwrd



QUESTION 19During the creation of an object store data source, an administrator is told that all passwords must beencrypted. What command line option would be used to accomplish this task?

A. Execute the command "storepasswords -profile myprofile".B. Execute the command "configmgr_cl storepasswords -profile myprofile".C. Execute the command "configmgr_cl encryptpasswords -profile myprofile".D. Execute the command "encryptpassword" command to encrypt and store the required password.



QUESTION 20A customer is upgrading from IBM FileNet P8 V4.5.1 to P8 V5.1. Currently they use IBM Legacy ContentSearch Engine (LCSE) for content indexing on a standalone LCSE server. The customer is migrating to IBMContent Search Services (CSS) as part of the upgrade. Which of the following is true?

A. They must upgrade to LCSE V5.0 before they can migrate to CSS.B. They must install CSS on it's own server because of the performance degradation of re-indexing jobs.C. Indexes from the current LCSE are not available once they start the indexing process on the new CSS

server.D. They must determine whether they will be using Workplace XT or Workplace (default application engine) to

successfully configure CSSfunctionality.



QUESTION 21A customer is using SSL for communication between IBM Configuration Manager and IBM WebSphereApplication Server Network Deployment (WAS-ND) during an installation. The customer receives an SSLsigner error when testing the connection to the application server or when running the Deploy Application task.To resolve the issue, the customer has to make sure that there is an entry for the SSL signer in the truststorethat IBM FileNet Configuration Manager uses. What resource should the customer update in WAS-ND?

A. CellDefaultTrustStoreB. NodeDefaultTrustStoreC. CellDefaultSSLSettingsD. NodeDefaultSSLSettings



QUESTION 22The Administrator would like to create a new object store. What other tool can be used instead of IBM FileNetEnterprise Manager (FEM)?

A. FileNet Configuration Manager (FCM)B. Web-based FileNet Enterprise Manager (WFEM)C. There are no other tools available to perform this specific task.D. Web-based IBM Administrative Console for Content Engine (ACCE)



QUESTION 23The connection between the IBM FileNet Process Engine and Component Manager, for event notifications in a

single server environment, is specified by entering the DNS name of the Application Engine server, on theServer Connections tab in Process Task Manager, running on the Process Engine server. In a highly availableenvironment, where the Application Engine has been deployed into an Application Server cluster, what shouldbe entered into the Host field?

A. The DNS name of the load balancer for the Application Engine cluster. The load balancer will distributeevent traffic amongst the runningComponent Managers.

B. Leave the field blank. Event based notification of Component Managers is not supported for a clusteredApplication Engine environment.Leaving the field blank effectively disables this feature.

C. The DNS name of one of the cluster members. No load balancing is possible but event traffic willautomatically be re-routed to one of theremaining Component Managers if the named server fails.

D. The DNS names of all the machines running Component Managers in a comma delimited list. Event trafficwill be sent to the first ComponentManager in the list unless that has failed in which case the second in thelist will be used (and so on).



QUESTION 24A customer is performing a upgrade to IBM FileNet P8 V5.1. They have three environments, DEV (V4.0), Test(V3.5) and PROD (V3.5). After completing the Test system upgrade, the customer is finding many PE workobjects in the exception state. Before running the upgrade again, what steps need to be taken in order tocorrect the issue?

A. Restore the databases and reassign work objects as required.B. This is a test system and many users are created by testers, so this is not a problem.C. Restore the IBM FileNet Process Engine 3.5 software and reassign work objects as required.D. Restore the databases and the IBM FileNet Process Engine 3.5 software, then reassign work objects as

required.



QUESTION 25A customer would like to expand their IBM FileNet Content Engine instance, by adding additional object storesas well as add multiple LDAP realms. Which of the following tasks can help the customer expand their systemusing FileNet Configuration Manager?

A. Configure LDAPConfigure Bootstrap PropertiesDeployB. Configure GCD JDBC Data SourcesConfigure LDAPConfigure Bootstrap PropertiesDeployC. Configure Object Store JDBC Data SourcesConfigure LDAPD. Configure GCD JDBC Data SourcesConfigure Object Store JDBC Data SourcesConfigure Bootstrap

Properties



QUESTION 26An instance of IBM Content Search Services server has been successfully installed. To verify the installation,the deployment specialist needs to check the value of the authentication token that was generated by theinstallation procedure, based upon the supplied seed, and then manually record it for later use. How can this beaccomplished?

A. Inspect the installation log file - the token is recorded there.B. Use the supplied configTool command line utility to display the value of the token.C. Use the supplied adminTool command line utility to display the value of the token.D. Use the supplied dumpIndex tool to recover the configuration information (including the token).



QUESTION 27While testing the application server connection in FileNet Configuration Manager, the tool displays an errormessage stating that it failed. Which of the following would be a valid reason for the application serverconnection test failure?

A. The LDAP server is not running.B. SSL is not configured correctly.C. The LDAP parameters are incorrect.D. The datasource parameters are incorrect.



QUESTION 28An administrator is asked to install IBM FileNet Enterprise Manager (FEM) on a workstation running MicrosoftWindows 7 and is told that FEM will be required to use SSL to communicate with the Content Engine server.What additional Windows components will need to be installed to enable this?

A. Microsoft .NET Framework V1.1 (or higher).B. Microsoft Web Services Enhancements (WSE) V3.0 only.C. Microsoft .NET Framework V2.0 with Microsoft Web Services Enhancements (WSE) V3.0.D. Microsoft .NET Framework V3.0 (or higher) with Windows Communication Foundation (WCF).



QUESTION 29

While testing the database connection using FileNet Configuration Manager, the tool displays an error messagestating that the test failed. What would be two valid reasons for the database connection test failure?

A. SSL is not configured correctly.B. The LDAP server is not running.C. Application server is not running.D. The LDAP parameters are incorrect.E. The data source parameters are incorrect.

Correct Answer: CESection: (none)Explanation


QUESTION 30A customer is implementing a new, highly available IBM FileNet P8 environment that will also be used for IBMCase Manager. The RDBMS that has been chosen is DB2. There will initially be three separate Object Storesused for this implementation. The Process Engine (PE) needs to be scaled to meet the business requirements.Which of the following choices both meets the requirements of this situation and conforms to IBM bestpractices?

A. Install PE on two or more servers. Use a hardware load balancer to balance the PE ports. Use one PEregion for all three Object Stores.

B. Install PE on two or more servers. Use a hardware load balancer to balance the PE ports. Use three PEregions, one for each Object Store.Configure these regions for region recovery.

C. Install PE on two or more servers. Use a hardware load balancer to balance the PE ports. Use three PEregions, one for each Object Store.Vertically scale the PE on each server so that each region is running inits own PE virtual server.

D. Install PE on two or more servers. Use a hardware load balancer to balance the PE ports. Use threeseparate PE tablespaces, each with itsown region. Vertically scale the PE on each server so that eachregion is running in its own PE virtual server.



QUESTION 31A customer wants to install IBM FileNet Rendition Engine (RE) (uses Liquent component) in a separate physicalsystem and needs to determine the installation sequence and configuration tasks that should be performed.What is the sequence of installation and configuration tasks that should be performed during the installationand configuration of the IBM FileNet Rendition Engine?

A. Install and configure Content Engine, install MS SQL or DB2 database for RE, install RE, configure REconnection to CE in FEM, configure AEto use path-based URLs.

B. Install and configure Content Engine, install MS SQL or Oracle database for RE, install RE, configure REconnection to CE in FEM, configureAE to use path-based URLs.

C. Install and configure Content Engine, install MS SQL or Oracle database for RE, install RE, configure REconnection to CE in Liquent DomainManager, configure AE to use path-based URLs.

D. Install and configure Content Engine, install MS SQL or Oracle database for RE, install RE, configure REconnection to CE in FEM, configureLiquent Domain Manager to use path-based URLs.



QUESTION 32There is a requirement to deploy Workplace into a highly available environment: an application server cluster.To achieve this, the consultant should:

A. Install Workplace on one server in the cluster and use the application server tools to deploy to the othercluster members.

B. Install Workplace on all servers in the cluster and use the application server tools to deploy from one serverto all the cluster members.

C. Install Workplace on all servers in the cluster and use the application server tools to deploy to each localapplication server member in turn.

D. Install Workplace on one server and use the application server tools to deploy to the local applicationserver, then manually copy theinstallation to all servers in the cluster.



QUESTION 33A customer is building multiple stand-alone development servers with IBM FileNet P8 V5.1, but is concernedwith the amount of time required to perform all the prerequisites and configuration for each server. They areseeking input from the consultant to reduce the workload implementing this requirement. What would be thebest recommendation?

A. Install the core engines and all middleware on each server using the Composite Platform Installation Tool.B. Help them complete the Installation and Upgrade Worksheet for the first server, and install the core engines

and all middleware usinginformation in the worksheet to configure the Composite Platform Installation Tool.Copy the installed directories to the remaining servers.

C. Help them complete the Installation and Upgrade Worksheet for the first server, install the core enginesusing the information in the worksheetand the silent install scripts on the first server. Copy the softwaredirectories to the others servers and install using the silent install scripts.

D. Help them complete the Installation and Upgrade Worksheet for the first server, install the core enginesusing the information in the worksheetand the standard installation. Then, copy the worksheet and replacethe server names for the remaining servers and perform the installationon each server.



QUESTION 34A customer wants to install IBM FileNet Process Engine (PE) and Content Engine (CE) on separate UNIXservers and needs to identify, at a high level, the installation and configuration tasks sequence. AssumingContent Engine and Workplace XT are installed and running, which sequence of tasks should be performed toinstall and configure PE?

A. Install PE binaries, install CE client patch on PE, configure PE using Component Manager.B. Install PE binaries, configure PE using Process Task Manager, install CE client files on PE.C. Install PE binaries, install CE client patch on PE, configure PE using Process Task Manager.D. Install PE binaries, install CE client patch on PE, configure PE using FileNet Enterprise Manager.



QUESTION 35A customer is planning on installing IBM FileNet Process Engine (PE), in a highly available configuration,utilizing Microsoft Windows servers. The PE will service Workpace XT (WPXT) clients, Process Engine WebServices clients (PEWS transport: HTTP), and Java API clients. Which two of the following are supportedchoices for this configuration?

A. Clustered PE using Veritas Cluster Server (VCS).B. Clustered PE using Microsoft Cluster Server (MSCS).C. Farmed PE using an BIG-IP F5 hardware load balancer.D. Clustered PE using High Availability Cluster Multi-Processing (HACMP).E. Farmed PE using Microsoft's Network Load Balancing (NLB) feature in Windows Server.

Correct Answer: BCSection: (none)Explanation


QUESTION 36Assume that a customer is deploying IBM FileNet P8 on an IBM WebSphere Application Server, using IBM DB2as the backend database. While running the "Configure GCD JDBC Data Sources" task, an exception isreceived as follows: WASX7017E: Exception received while running file "C:\Program Files\IBM\FileNet\ContentEngine\tools\configure\tmp/configurejdbcgcd.tcl"; exception information:javax.management.MBeanException com.ibm.wsspi.runtime.variable.UndefinedVariableException:com.ibm.wsspi.runtime.variable.UndefinedVariableException: Undefined variableDB2UNIVERSAL_JDBC_DRIVER_PATH How would the customer resolve this exception?

A. Setting the PATH environment variable to include the driver path.B. Setting a WebSphere variable DB2UNIVERSAL_JDBC_DRIVER_PATH equal to db2jcc.jar.C. Setting a WebSphere variable DB2UNIVERSAL_JDBC_DRIVER_PATH with the driver path.D. Setting the Windows registry variable DB2UNIVERSAL_JDBC_DRIVER_PATH with the driver path.



QUESTION 37An administrator is preparing to update all IBM FileNet P8 components with a new Content Engine client fixpack. The installation and upgrade worksheet will be used to gather values for the client update. What must bedone to filter the worksheet for Content Engine client installer values only?

A. Verify that row filtering is enabled.B. Verify that column filtering is enabled.C. Verify that row and column filtering is enabled.D. Verify that the Data > Filter > AutoFilter command is enabled.



QUESTION 38A customer is planning a IBM FileNet P8 implementation and needs to identify the IBM FileNet P8 solutioncomponent dependencies in regards to an application server. What are the general application serverrequirements for Application Engine, Content Engine and Workplace XT?

A. IBM WebSphere Application Server (Base, Express, ND); Oracle WebLogic Platform (Premium, Advantage,Express); Oracle WebLogic Server(Premium, Advantage, Express)

B. IBM WebSphere Application Server (Base, Express, ND); Oracle WebLogic Server (Premium, Advantage,Express); JBoss Application ServerEnterprise; JBoss Application Server Open Source

C. IBM WebSphere Application Server (Base, Express, ND); Oracle WebLogic Platform (Premium, Advantage,Express); Oracle WebLogic Server(Premium, Advantage, Express); JBoss Application Server Enterprise

D. IBM WebSphere Application Server (Base, Express, ND); Oracle WebLogic Platform (Premium, Advantage,Express); Oracle WebLogic Server(Premium, Advantage, Express); JBoss Application Server Enterprise;JBoss Application Server Open Source



QUESTION 39A highly available IBM FileNet P8 environment has just been installed with an IBM WebSphere ApplicationServer Network Deployment (WAS-ND) Content Engine (CE) cluster containing four CE JVM's. A hardwareload balancer is being used to spread HTTP/HTTPS traffic across the CE JVM's. Workplace XT (WPXT) hasbeen configured to point to this CE cluster. Assuming all four CE JVM's are currently active, which two of thefollowing are the best choices for validating proper CE responses through the load balancer?

A. Logon via WPXT. Begin performing CE related work. Systematically shutdown and start CE JVM's so thatno more than three and no fewer thantwo JVM's are active at any time. Continue testing in this manner forone hour.

B. View the startup context name (i.e. CE Ping Page) of the load balancer. Continue to refresh this page in thebrowser until all four JVM's havebeen viewed. View the startup context name of each JVM and compare theresults.

C. View the Content Engine Web Service Transport (CEWS) page of the load balancer (i.e.http://<virtual_name>:<virtual_port>/wsi/FNCEWS40MTOM/). Continue to refresh this page several times to seeif any errors occur. View theCEWS page of each JVM and compare the results.

D. Shutdown three of the four CE JVM's in WAS-ND. Logon via WPXT. Begin performing CE related work. Inbetween work steps, start one ofthe stopped CE JVM's and then stop the previously started JVM. Continuetesting in this manner until all CE JVM's have been isolated duringtesting.

E. Disable three of the four CE JVM's in the load balancer. Logon via WPXT. Begin performing CE relatedwork. In between work steps, enableone of the disabled CE JVM's and then disable the previously enabled

JVM. Continue testing in the manner until all CE JVM's have beenisolated during the testing.



QUESTION 40A customer sees the following ping page:

The p8_server_error.log indicates the following message:

2012-05-15T11:20:43.381Z 72D072D0 GCD FNRCE0000W - WARN A database availability issue wasencountered when checking the GCD's epoch - using last cached instance. Exception was: The databaseaccess failed with the following error: ErrorCode 0, Message 'DSRA9110E: Statement is closed.' SQL:"SELECT last_epoch_id FROM FNGCD WHERE (epoch_id = 0)" 2012-05- 15T11:21:14.959Z 521E521E GCDFNRCE0000W - WARN A database availability issue was encountered when checking the GCD's epoch -using last cached instance. Exception was: The server cannot get the data source FNGCDDS.

What could be the probable reason for this failure and what could rectify the issue?

A. Reason: The database server could be down.Resolution: Start the database server, if it is down.B. Reason: The application server could be down.Resolution: Start the application server, if it is down.C. Reason: The username/password used for the data source FNGCDDS could be wrong.Resolution:

Verify datasource attributes and test the connection to the database.D. Reason: The LDAP server is down.Resolution: Verify the connection to the LDAP server and start the LDAP

server, if it is not up.



QUESTION 41A P8 Administrator wants to export a development object store to a production object store. Which tool shouldbe used as a best practice to do accomplish this?

A. FileNet Enterprise ManagerB. FileNet Deployment ManagerC. FileNet Consistency CheckerD. FileNet Configuration Manager


Explanation


QUESTION 42While attempting to validate the installation of a new IBM FileNet P8 system, the consultant has troubles withgetting workflows to transfer. The consultant suspects that the Process Engine client may not be the correctversion on either the Content Engine or the Application Engine. What two URLs can be used to display theinformation needed to verify the version of the clients used to connect to the Process Engine?

A. http://AEServerName:port/WorkplaceB. http://PEServerName:port/IOR/pingC. http://CEServerName:port/FileNet/EngineD. http://CEServerName:port/wsi/FNCEWS40MTOME. http://PEServerName:port/IOR/FileNet.PE.vworbbroker



QUESTION 43The customer has just completed deploying a IBM FileNet Content Engine server. What tool would thecustomer use to validate the installation and deployment of the IBM FileNet Content Engine?

A. Process DesignerB. Configuration ManagerC. FileNet Enterprise ManagerD. Process Configuration Console



QUESTION 44The administrator for a company receives the following error when trying to connect to Content Engine for thefirst time using Enterprise Manager.

(Refer to the example) What is the cause of the error?

A. Network Layer 3 issue.B. Content Engine URI is not correct.C. Application server of Content Engine is not up.D. The workstation where Enterprise Manager is used does not have Web Services Enhancements (WSE)

installed.



QUESTION 45A highly available IBM FileNet P8 environment has just been installed using IBM WebSphere Application ServerNetwork Deployment (WAS-ND). In the WAS-ND cell there has been two clusters created: a Content Engine(CE) cluster containing four CE JVM's and a Workplace XT (WPXT) cluster containing two WPXT JVM's. Ahardware load balancer is being used to spread HTTP/HTTPS traffic across both the CE JVM's and the WPXTJVM's. Workplace XT (WPXT) has been configured to point to the CE cluster.

Assuming all four CE JVM's and both WPXT JVM's are currently active, which of the following is the bestchoice for validating proper WPXT response through the load balancer?

A. Shutdown one of the two WPXT JVM's. Logon to WPXT via the load balancer. Begin browsing an ObjectStore. Start the stopped WPXT JVMand stop the previously started WPXT JVM. Continue browsing anObject Store and verify that no interruption has occurred to the WPXTsession.

B. Shutdown one of the two WPXT JVM's. Logon to WPXT via the load balancer. Open the Search Designerapplet. Start the stopped WPXT JVMand stop the previously started WPXT JVM. Perform a save in theopened Search Designer applet and verify that no interruption has occurredto the WPXT session.

C. Disable one of the two WPXT JVM's in the load balancer. Logon to WPXT via the load balancer.Begin browsing an Object Store. Enable thedisabled WPXT JVM and then disable the previously activeWPXT JVM. Continue browsing and Object Store and verify that no interruption hasoccurred to the WPXTsession.

D. Logon directly to one of the WPXT JVM's. Open the Search Designer applet, perform a save, and log out.Logon directly to the other WPXTJVM. Open the Search Designer applet, perform a save, and log out.Logon to WPXT via the load balancer. Open the Search Designer applet,perform a save, and log out.Compare the results.

Correct Answer: DSection: (none)

Explanation


QUESTION 46A customer is upgrading and merging two IBM FileNet P8 domains into a single new IBM FileNet P8 V5.1domain. One source domain is at IBM FileNet P8 V3.5.2, the other is at IBM FileNet P8 V4.5.1. Both sourcedomains use the same LDAP. What order, if necessary, needs to be followed when upgrading and adding thesource domains into the new unified domain?

A. There is no order precedence.B. You must add the P8 V3.5.2 source domain first.C. You must add the P8 V4.5.1 source domain first.D. You cannot merge P8 3.5.2 and P8 4.5.1 source domains together while upgrading.



QUESTION 47A customer is planning to implement an IBM FileNet P8 environment, including an IBM Case Managercomponent. The customer needs to identify the dependencies of their solution. What databases are supportedby the IBM FileNet P8 platform, including IBM Case Manager V5.1?

A. Oracle (Enterprise and Standard); Microsoft SQL Server 2008 (Enterprise and Standard).B. IBM DB2 Universal Database for Windows (Workgroup, Express, Enterprise and Advanced); Oracle

(Enterprise and Standard).C. IBM DB2 Universal Database for Linux, UNIX, Windows (Workgroup, Express, Enterprise and Advanced);

Microsoft SQL Server 2008,(Enterprise and Standard).D. IBM DB2 Universal Database for Linux, UNIX, Windows (Workgroup, Express, Enterprise and Advanced);

Oracle (Enterprise and Standard);Microsoft SQL Server 2008 (Enterprise and Standard).



QUESTION 48When attempting to connect to the IBM FileNet Content Engine for the first time after installation anddeployment, the installation technician is getting an "Invalid Credentials" error. Which task in the ConfigurationManager tool should be checked and run again?

A. Configure LDAPB. Configure Bootstrap PropertiesC. Configure GCD JDBC Data SourcesD. Configure Object Store JDBC Data Sources


Explanation


QUESTION 49A consultant is performing a fresh install of an IBM FileNet P8 system and is about to create an additionalobject store. What task needs to be created and run from within Configuration Manager to add the databaseconnections to the application server?

A. Configure LDAPB. Configure Bootstrap PropertiesC. Configure GCD JDBC Data SourcesD. Configure Object Store JDBC Data Sources



QUESTION 50A consultant is working with a customer to perform an upgrade from IBM FileNet P8 V3.5.2 to P8 V5.1 in adistributed environment using IBM WebSphere Application Server Network Deployment (WAS ND) with a loadbalancer for http protocol for both the Content Engine (CE) and Application Engine (AE). When attempting torun the command-line CE Upgrader from the first node of the CE cluster, the <CE_install_path>/ContentEngine/tools/upgrade directory is not found. What is the most likely issue?

A. This is a known issue with the CE installer: use the Web Upgrade Tool.B. When the CE was installed, only the Web Upgrade Tool was installed by default.C. When the CE was deployed in the WAS ND environment, it was installed on the Deployment Manager

node.D. When the CE was deployed in the WAS ND environment, the command-line CE Upgrader did not deploy

properly to the node.



QUESTION 51The FileNet customer wants to install IBM FileNet Content Engine and Process Engine on separate UNIX (AIXor Linux) servers and needs to identify, at a high level, the installation and configuration tasks sequence. Thefollowing installation and configuration tasks should be performed for the installation and configuration of IBMFileNet Content Engine on UNIX:

A. Install DB2 database, install Websphere, install CE using install executable, install PE client files on CE,grant directory permissions toConfiguration Manager (configmgr), Configure CE instances and LDAP inconfigmgr, configure WAS with Tivoli Directory server FederatedRepositories, deploy CE with configmgr,configure FileNet P8 Domain and GCD in FEM.

B. Install DB2 database, set DB2 environment variables, install DB2 JDBC driver, install Websphere, install CEusing install executable, install PEclient files on CE, grant directory permissions to Configuration Manager(configmgr), Configure CE instances and LDAP in configmgr, configureWAS with Tivoli Directory serverFederated Repositories, deploy CE with configmgr,

C. Install DB2 database, set DB2 environment variables, install DB2 JDBC driver, install Websphere, install CEusing install executable, grantdirectory permissions to Configuration Manager (configmgr), Configure CEinstances and LDAP in configmgr, configure WAS with TivoliDirectory server Federated Repositories,deploy CE with configmgr, configure FileNet P8 Domain and GCD in FEM.

D. Install DB2 database, set DB2 environment variables, install DB2 JDBC driver, install Websphere, install CEusing install executable, install PEclient files on CE, grant directory permissions to Configuration Manager(configmgr), Configure CE instances and LDAP in configmgr, configureWAS with Tivoli Directory serverFederated Repositories, deploy CE with configmgr, configure FileNet P8 Domain and GCD in FEM.



QUESTION 52An administrator is preparing to install the IBM FileNet Content Engine client files on the Application Engine.What should be verified prior to starting the installation of the client files?

A. Verify that the Content Engine is shut down.B. Verify that the Content Engine is up and running.C. Verify that the Application Engine is up and running.D. Verify that the Application Engine version matches the client file version.



QUESTION 53A customer wants to install IBM Content Search Services (CSS) in servers separate from the IBM FileNetContent Engine (CE) and needs to identify, at a high level, the installation and configuration task sequence.What is the complete sequence of installation and configuration tasks that should be performed for theinstallation and configuration of CSS?

A. Install CSS on the search server, obtain the CSS authentication token and using FileNet EnterpriseManager (FEM) configure CSS servers onCE in Index, Search, or IndexAndSearch mode. Use FEM to addindex areas for CSS and enable text search on the object store.

B. Apply the CSS client files to the CE servers, install CSS on the search server and obtain the CSSauthentication token. Using FEM configureCSS servers on CE in Index, Search, or IndexAndSearch mode.Use FEM to enable text search on the object store.

C. Apply the CSS client files to the CE servers, install CSS on the search server and obtain the CSSauthentication token. Use FEM to configureCSS servers on CE in Index, Search, or IndexAndSearch mode.Use FEM to add index areas for IBM CSS and enable text search on the objectstore.

D. Apply the CSS client files to the CE servers, install CSS on the search server, and obtain the CSSauthentication token. Using FEM configureCSS servers on CE in Index, Search, or IndexAndSearch mode.Use FEM to add index areas for CSS. Use Workplace to enable text search ondocument classes.



QUESTION 54The IBM FileNet Process Engine software has been installed on a Linux server using a non-root operatingsystem user and using the default storage locations. What additional manual step must be taken to ensure thatthe Process Engine manager process is started automatically following a reboot?

A. Using a user with appropriate permissions edit the /etc/inittab file and add the followingline:PEMR:2345:wait:/opt/IBM/FileNet/ProcessEngine/runstartpemgr

B. Using a user with appropriate permissions edit the /etc/inittab file and add the followingline:PEMR:2345:wait:/opt/IBM/FileNet/ProcessEngine/bin/pemgrstart

C. Using a user with appropriate permissions edit the /etc/initlog.conf file and add the followingline:PEMR:2345:wait:/opt/IBM/FileNet/ProcessEngine/bin/runpemgr

D. Using a user with appropriate permissions edit the /etc/initlog.conf file and add the followingline:PEMR:2345:wait:/opt/IBM/FileNet/ProcessEngine/startpesvr



QUESTION 55A customer has decided to use the IPv6 network protocol for IBM FileNet P8 Process Engine. What must bedone after installing the Process Engine client files on the Content Engine?

A. Update the taskman.properties file on the Content Engine with the following values:-Djava.net.preferIPv6Addresses=true-Djava.net.preferIPv4Stack=false

B. Update the taskman.properties file on the Process Engine with the following values:-Djava.net.preferIPv6Addresses=true-Djava.net.preferIPv4Stack=false

C. Update the Content Engine server's host file with the IP address of the Process Engine.D. Update the Process Engine server's host file with the IP address of the Content Engine.



QUESTION 56A customer wants to upgrade from IBM FileNet P8 V4.5.1 to IBM FileNet P8 V5.1. After completing the ContentEngine Upgrade Installation, they create an Upgrade Profile in IBM FileNet Configuration Manager and areready to re-configure the Content Engine Instance. Which of the following represents the set of tasks to be re-run in the IBM FileNet Configuration Manager?

A. Deploy TaskB. Configure Login modulesConfigure Bootstrap properties (New)Deploy ApplicationC. Configure Bootstrap properties (Upgrade)D. Configure Bootstrap properties (Upgrade)Deploy Application


Explanation/Reference:

Explanation:

QUESTION 57A customer is looking at purchasing IBM FileNet P8. As part of the bid process the system installer is installinga Proof-of-Concept (POC) P8 system. The sales team needs a solution immediately. The customer's corporatestandard infrastructure products are WebSphere, DB2, AIX and Active Directory. What is the best installationscenario to offer this customer?

A. Offer the Composite Platform Installation Tool (CPIT), but provide Tivoli as the LDAP.B. Offer the CPIT tool scripts and reconfigure for the customers LDAP provider after it completes.C. Offer the CPIT tool scripts and modify for the customers infrastructure solutions to input option.D. Use the CPIT interactively and select the products to match the customers infrastructure input option.



QUESTION 58A customer has deployed IBM FileNet Content Engine on a cluster in the IBM WebSphere Application Server.What are the post deployment steps?

A. Stop and start the cluster.B. Stop and start the application server profile.C. Stop and start the cluster, as well as the deployment manager and all of its managed nodes.D. Stop and start the application server where Content Engine is deployed, including the Deployment Manager

and all managed nodes.



QUESTION 59A P8 administrator has discovered that a new fix pack was released for the Content Search Engine client files.On which IBM FileNet P8 component(s) should the administrator apply this fix pack?

A. Content Engine servers.B. Content Search Engine server only.C. Process Engine and Application Engine servers.D. Application Engine and Content Search Engine servers.



QUESTION 60As part of an IBM FileNet P8 installation, the consultant is configuring both HTTP and LDAP for secureauthentication and data transport over the network. For this purpose either TLS or SSL can be used. Which of

these statements is NOT true of both TLS and SSL?

A. TLS or SSL can be used to verify the identity of one or both of the parties engaged in a network connection.B. TLS or SSL can also provide data integrity (proof that the data has not been modified since the sender sent

it).C. TLS or SSL can provide data confidentiality (obscuring the data from third parties observing the dialog over

the connection).D. Both TLS and SSL are supported. Any time an application server has been configured to support TLS, it has

also thereby been enabled forSSL 3.0. Whether it actually uses SSL or TLS depends on the runtimenegotiation between client and server.



QUESTION 61A solution developer wants to copy the initial deployment of a IBM FileNet P8 application from a developmentenvironment to a different destination environment. Which configuration file is used by Workplace XT todetermine what Java Server Pages, servlets, or custom applications are used when a user attempts to viewcontent from inside Workplace XT?

A. Actions.xmlB. ServerConfig.xmlC. content_redir.propertiesD. WcmApiConfig.properties



QUESTION 62A system administrator has created the initial site preferences by logging into Workplace XT for the first time.What steps would the administrator take to verify the successful creation of the preferences file?

A. Perform a local search on the server and open the file "Preferences.xml".B. Login to Workplace XT and select view site preferences from the menu on the left panel.C. Use FileNet Enterprise Manager to access the preferences file by navigating to System > Site Preferences.D. Use FileNet Enterprise Manager to access the preferences file by navigating to Object Stores > Object

Store "name" > Root Folder >Preferences.



QUESTION 63IBM FileNet Process Engine security has been configured with both a Process Administrators group and aProcess Configuration group defined. A user who is an Application Engine Administrator but not a member of

either the Process Administrators group or the Process Configuration group is subsequently attempting toinitialize the first isolated region. Will the user succeed in this task?

A. Yes. Application Engine Administrators are by implication also administrators for the Process Engine andcan consequently initialize an isolatedregion.

B. No. The user must be a member of either the Process Administrator group or the Process Configurationgroup in order to be able to initializean isolated region.

C. No. The user must be a member of both the Process Administrator group and the Process Configurationgroup in order to be able to initializean isolated region.

D. Yes. When both a Process Administrator group and a Process Configuration group is defined only userswho are not members of either groupmay initialize an isolated region.



QUESTION 64When installing IBM FileNet Content Federation Services for Image Services (CFS-IS) there is a requirement toinsert a four part Network Clearing House (NCH) service name into the hosts file, or DNS, for each ContentEngine server. Given that the FileNet Image Services Domain name is "AccountsPayable" and the Organizationname is "ExampleCo", which of these is the correct format for the four part NCH service name?

A. accountspayable-exampleco-nch-serverB. accountspayable:exampleco:nch:serverC. AccountsPayable:ExampleCo-nch-serverD. AccoountPayable.ExampleCo.nch.server



QUESTION 65When signing on to Workplace XT for the first time post deployment, a collection of bootstrap properties mustbe configured. In a clustered environment where should these properties be stored?

A. In the CEMPBoot.properties file embedded within the Content Engine EAR file.B. In a single bootstrap.properties file located in a shared location accessible to all members of the cluster.C. In a local bootstrap.properties file located in the install_path/IBM/FileNet/Config/WebClient folder on each

machine in the cluster.D. In the bootstrap section of the site preferences file, the location of which is defined in the

WcmAPIConfig.properties file for each clustermember.



QUESTION 66

A solution developer wants to copy the initial deployment of their IBM FileNet P8 application from adevelopment environment to a different destination environment. Which configuration file contains the serverURLs used by Workplace XT to upload and download content from the Content Engine?

A. Actions.xmlB. ServerConfig.xmlC. RemoteServer.xmlD. WcmApiConfig.properties



QUESTION 67A customer creates two file storage areas, D:\FileStores\SA1 and D:\FileStores\SA2, and associates thestorage areas with a storage policy: "Farmed Storage Policy". The Default Storage Policy and the DefaultStorage Area for the Document class is set as follows:

What happens when new documents of type Document are added to this object store?

A. The Farmed Storage Policy is in place and the documents gets added to the farmed storage areas.B. The Farmed Storage Policy is ignored and the documents gets added to the default database storage area.C. The Farmed Storage Policy is in place as well as the default database storage area. Documents are added

randomly to either of the three storage areas.D. The system is not able to decide whether the storage policy takes precedence over the storage area.

The user is prompted to select the storage area and adds the document based on the user's selection.



QUESTION 68A company has users who span multiple time zones. What steps need to be taken to ensure accurate detectionof time zones for a client browser?

A. Time zone detection must be enabled on the client browser.B. Use Workplace XT to modify the the time zone detection under Site Preferences.C. Manually modify the preferences.xml file to set the parameter "useEnhancedTimeZoneDetection".D. Manually modify the bootstrap.properties file to set the parameter "useEnhancedTimeZoneDetection".



QUESTION 69Of the choices below, which two remote file access protocols are supported between an IBM FileNet ContentEngine and a file server?

A. Network File System (NFS).B. File Transfer Protocol (FTP).C. Common Internet File System (CIFS).D. Internet Message Access Protocol (IMAP).E. Distributed File System (DFS) when used for both management and replication.

Correct Answer: ACSection: (none)Explanation


QUESTION 70A company is using Oracle Directory Server Enterprise Edition as the LDAP server for IBM FileNet P8 and ithas 5,000 users configured in the LDAP server. What is the recommendation for setting the Look Through Limitvalue to ensure that P8 will display all the users properly?

A. 0B. -1C. 5000D. 4750 (95% of the user population)



QUESTION 71Given an IBM FileNet P8 environment with multiple IBM Content Search Services (CSS) Search servers andmultiple CSS Index servers, which of the following statements regarding the CSS index data stored on disk iscorrect?

A. CSS Index servers need read and write access to the index data stored on disk, but the CSS Searchservers only need read access.

B. CSS Index servers can only use locally attached disk to create indexes on, but CSS Search servers can uselocal or network shared disks.

C. If a network share is used for the index data stored on disk, it can be located at a different site from theobject store where the index areas aredefined.

D. If the Content Engines reside on UNIX servers with UNIX based file stores, the CSS servers can reside onMicrosoft Windows with Windowsbased index data storage provided all CSS servers are on the sameversion of Windows.



QUESTION 72A security administrator has been given the following information for creating a new LDAP account for use withIBM FileNet P8: (CN=JohnDoe,CN=Users,DC=Filenet,DC=com). What is this directory entry called withinLDAP?

A. RealmB. Short NameC. Distinguished NameD. User Principal Name



QUESTION 73An IT administrator is working on creating an IBM FileNet Process Engine installer account. What are theminimum permissions the IT Administrator should give to the installer account on the device or location whereProcess Engine is to be installed (e.g. /opt/IBM/FileNet/ProcessEngine)?

A. WriteB. Read, WriteC. Write, ExecuteD. Read, Write and Execute



QUESTION 74A customer is planning a network configuration of an IBM FileNet P8 deployment in a Microsoft Windowsenvironment. Which of the following task is NOT required?

A. Ensure NetBEUI over TCP/IP is enabled.B. Ensure NetBIOS over TCP/IP is enabled.C. Assign all P8 servers a static IP Address.D. Ensure availability of required port numbers.



QUESTION 75A customer has decided to use IBM WebSphere Application Server (WAS). They have also decided to useFederated Repositories as the LDAP repository type. Rather than using the app_server_admin user, they would

like to specify a different user as the administrative console user. Which of the following must be true about thisuser?

A. The user must be unique across all federated realms.B. The user does not need to be unique across all federated realms.C. The user does not need to exist in WAS local file-based repository.D. The user only needs to exist in the WAS local file-based repository.



QUESTION 76A consultant wants to improve application response times on an existing large IBM DB2 database for an IBMFileNet P8 Content Engine. What command/s would the consultant run on DB2 to accomplish this?

A. alter table <table_name> compress yes;B. alter index <index_name> compress yes;C. alter table <table_name> reorg yes;alter table <table_name> allow read access;D. alter table <table_name> compress yes;reorg table <table_name> allow read access;



QUESTION 77A client is planning the implementation of an IBM FileNet P8 platform and needs to identify and plan fordeployment environments. What are the installation types that should be considered while planning for a IBMFileNet P8 deployment?

A. Development and Production.B. Preproduction, Disaster recovery, and Production.C. Development, Test, Disaster recovery, and Production.D. Development, Test, Preproduction, Disaster recovery, and Production.



QUESTION 78A highly available IBM FileNet P8 environment has just been installed with horizontally scaled Process Engine(PE) servers using a hardware load balancer. There are currently two PE servers in this farm. There are threeConnection Points currently configured, one for PE #1, one for PE #2, and one for the virtual address and portof the farm as defined in the load balancer. Additionally there are load balanced implementations of WorkplaceXT (WPXT) and Content Engine (CE). Assuming all P8 core components are currently active, and theConnection Point for the PE farm is currently selected in the WPXT Site Preferences, which of the following isthe best choice for validating PE functionality in conjunction with the load balancer.

A. View the PE Ping Page of the load balancer (i.e. http://<virtual_name>:<virtual_port>/IOR/ping).Continue to refresh this page in the browseruntil both PE servers respond. View the PE Ping Page of eachPE server directly. Compare the results.

B. Shutdown PE #2. Logon via WPXT. Open Process Designer. Create a simple two-step workflow definition.Validate the workflow definition.Start PE #2 and shutdown PE #1. Launch the workflow.Close Process Designer. Complete the first step of the workflow. Start PE #1 andshutdown PE #2.Complete the second step of the workflow.

C. Open two browsers. In the first browser logon to WPXT and change the Site Preferences by selecting aConnection Point that is configured forPE #1. In the second browser, logon to WPXT, launch a previouslycreated two-step workflow. Complete the first step of the workflow. In thefirst browser select a ConnectionPoint that is configured for PE #2. In the second browser, complete the second step of the workflow.

D. The required PE session affinity, defined in the load balancer, prevents in-process transactions from failingover to a secondary PE in farmedenvironment. If a failure occurs, the transaction is rolled-back and the usermust restart that transaction upon failing over to a new PE. To testthis functionality, begin some PE relatedwork such as launching a workflow and just before completing a step, shutdown the active PE.Whenattempting to complete the workflow step, the user will have to relaunch that step to continue.



QUESTION 79A highly available IBM FileNet P8 environment has just been installed with horizontally scaled Process Engine(PE) servers using a hardware load balancer. There are currently two PE servers in this farm. There are threeConnection Points currently configured, one for PE #1, one for PE #2, and one for the virtual address and portof the farm as defined in the load balancer. Additionally there are load balanced implementations of WorkplaceXT (WPXT) and Content Engine (CE). Assuming all P8 core components are currently active and appear to befunctioning properly, and the Connection Point for the PE farm is currently selected in the WPXT SitePreferences, which of the following is the best choice for validating that all PE servers are responding properlythrough the load balancer.

A. View the PE Ping Page of the load balancer (i.e. http://<virtual_name>:<virtual_port>/IOR/ping).Continue to refresh this page in the browseruntil both PE servers respond. View the PE Ping Page of eachPE server directly. Compare the results.

B. Shutdown PE #2. Logon via WPXT. Open Process Designer. Create a simple two-step workflow definition.Validate the workflow definition.Start PE #2 and shutdown PE #1. Launch the workflow.Close Process Designer. Complete the first step of the workflow. Start PE #1 andshutdown PE #2.Complete the second step of the workflow.

C. Open two browsers. In the first browser logon to WPXT and change the Site Preferences by selecting aConnection Point that is configured forPE #1. In the second browser, logon to WPXT, launch a previouslycreated two-step workflow. Complete the first step of the workflow. In thefirst browser select a ConnectionPoint that is configured for PE #2. In the second browser, complete the second step of the workflow.

D. The required PE session affinity, defined in the load balancer, prevents in-process transactions from failingover to a secondary PE in farmedenvironment. If a failure occurs, the transaction is rolled-back and the usermust restart that transaction upon failing over to a new PE. To testthis functionality, begin some PE relatedwork such launching a workflow and just before completing a step, shutdown the active PE.Whenattempting to complete the workflow step, the user will have to relaunch that step to continue.



QUESTION 80An IT Administrator would like to verify whether the Component Manager server can communicate with the IBMFileNet Process Engine. What is the correct URL to use from the Component Manager server to test theconnectivity?

A. http://<PEServer>:<port>/IOR/PingB. http://<PEServer>:<port>/P8PE/HealthC. iiop://<CEServer>:<port>/FileNet/EngineD. http://<CEServer>:<port>/wsi/FNCEWS40MTOM



QUESTION 81A customer would like to check the health of an IBM FileNet Content Engine deployment. Which of the followingwould the customer use?

A. t3://<CEServer>:<port>/P8CE/HealthB. iiop://<CEServer>:<port>/P8CE/HealthC. http://<CEServer>:<port>/P8CE/HealthD. cemp://<CEServer>:<port>/P8CE/Health



QUESTION 82A customer completed the installation of IBM FileNet P8 and wants to validate the Process Engine (PE) status.The IBM FileNet PE server Information page (IOR/ping) displays several parameters and statuses of the PEenvironment. What are the system parameter that can be obtained from Process Engine server informationpage?

A. PE classpath, PE log file location, and the number of isolated regions.B. PE log file location, PE host name, and bootstrap user credential status.C. PE data directory, number of isolated regions, and GCD database domain object.D. PE classpath, PE log file location, and list of configured fixed content devices (FCDs).



QUESTION 83The IBM FileNet Process Engine is unable to start after an upgrade. Customer-provided backgroundinformation (also known as MustGather data) is being requested by the IBM support engineer. What commandshould be run to gather operating system configuration and error reports on an HP-UX based system?

A. errpt -a?B. /usr/sbin/dmesgC. /usr/sbin/prtdiag -vD. wevtutil epl System Systemlog.evtx?



QUESTION 84The Process Engine is unable to start after an upgrade. Customer-provided background information (alsoknown as MustGather data) is being requested by the IBM support engineer. What command should be run togather operating system configuration and error reports on an AIX based system?

A. errpt -aB. /usr/sbin/dmesgC. /usr/sbin/prtdiag -vD. wevtutil epl System Systemlog.evtx



QUESTION 85The following error is displayed when an IBM FileNet P8 Administrator launches the Process Task Manager:

What is the reason that may cause this error?

A. The Component Manager did not start.B. The Process Engine's database is down.C. The Process Engine Manager service did not start.D. The administrator did not start the Process Engine by running the "initfnsw start" command.



QUESTION 86A customer is planning to install a new, highly available, IBM FileNet P8 environment that spans two datacenters that are relatively close together and connected by very high speed, redundant, data connections. Thenetwork latency between data centers is less than 1 ms. One of the design goals of this enterprise tierimplementation is to have both data centers be as active as possible regarding the processing of P8 data. IBMFileNet Enterprise Manager (FEM) will be configured to treat both data centers as a single site. WebSphereApplication Server Network Deployment (WAS-ND) has been chosen to host Content Engine (CE) andWorkplace XT (WPXT).

Which of the following choices both meets the criteria of the scenario and follows IBM best practices?

A. Configure two WAS-ND cells, one for each site. In each cell, create one cluster for WPXT and one clusterfor CE. Install the CE software on the WAS Deployment Manager node and deploy the EAR file to each CEcluster. Install WPXT on each cluster member node and deploy one WPXT EAR file to each WPXT cluster.Use hardware load balancers and HTTP proxy servers to spread client traffic across the two WPXTclusters' members. Configure each WPXT cluster to point to the CE cluster in its respective data center.

B. Configure WAS-ND as a single cell spanning both data centers. Create a cluster for WPXT with member

nodes at both data centers. Create a cluster for CE with member nodes at both data centers.Install the CE software on the WAS Deployment Manager node and deploy the EAR file to the CE cluster.Install WPXT on each cluster member node and deploy one WPXT EAR file to the WPXT cluster. Usehardware load balancers and HTTP proxy servers to spread client traffic across the WPXT cluster'smembers. Configure WPXT to point to the members of the CE cluster.

C. Configure two WAS-ND cells, one for each site. In each cell, create one cluster for WPXT and one clusterfor CE. Create the CE clusters with identical names. Install the CE software on the WAS DeploymentManager node and deploy the EAR file to each CE cluster. Install WPXT on each cluster member node anddeploy one WPXT EAR file to each WPXT cluster. Use hardware load balancers and HTTP proxy serversto spread client traffic across the two WPXT clusters' members. Configure each WPXT cluster to point to alist of all CE cluster members across both data centers.

D. Configure WAS-ND as a single cell spanning both data centers. Create two clusters for WPXT, one foreach data center. Create two clusters for CE, one for each data center. Install the CE software on the WASDeployment Manager node and deploy the EAR file to each CE cluster. Install WPXT on each clustermember node (of each WPXT cluster) and deploy one WPXT EAR file to each WPXT cluster.Use hardware load balancers and HTTP proxy servers to spread client traffic across the two WPXTclusters' members. Configure each WPXT cluster to point to the CE cluster in its respective data center.


Explanation/Reference:
