c 0129 ss sdh chassis ds - aryan telecommunication set/sssdh_datasheet.pdf2 sunset® sdh...
TRANSCRIPT
SUNRISE TELECOM®
SunSet® SDH with Jitter and Wander
Data Sheet
www.sunrisetelecom.com
Combining the power of a benchtop SDH/PDH set and protocol analyzer
into a handheld platform, the SunSet SDH offers advanced testing for
SDH, PDH, and ATM networks and services. With electrical and optical
interfaces, the SunSet SDH tests from 64 kbit/s to 2.5 Gbit/s (STM-16). Its
lightweight, durability, long battery life, and low cost make it the ideal tool
for field technicians in the access and metropolitan networks. And with
jitter and wander testing capabilities, save time and money for installa-
tion, maintenance, troubleshooting, and commissioning tasks, either at the
central office or in the field.
KEY fEaTURES
• SDHtestingat52,155,622Mbit/sand2.5Gbit/s
• PDH&T-Carriertestingat1.5,2,34,45,and139Mbit/s;
PDH/T-Carrier structured mode
• Biterrorratetestinganderrorperformanceanalysis
perITU-TG.821,G.826,G.828,G.829,M.2100,M.2101,
andM.2110
• SDH-SDH,SDH-PDHMuxTestmodes;IndependentTx
andRxfortestingADMsandsynchronousmultiplexers
• SDH/PDHMuxMode:dropandinsertof1.5/2Mtributaries
• FullSDHoverheadcontrolanddecode
• Tributaryscanforalarmanderrormonitoring
• APStimingmeasurementandAPSbytescapture
• Pointermonitoring,pointeradjustment,pointeroffset
andG.783pointertestsequences
• ITU-TcompliantJittergeneration,measurement,toler-
ance&transfertests,pointerjittertestinMuxTestmode
• RealtimewanderTIEmeasurementsandofflineMTIE/TDEV
analysis software conforming to ITU-T G.811, G.812,
G.813,G.823
• Pulsemaskanalysisat1.5,2,34,and45Mbit/s
• Tandemconnections:errors,alarms,APIdcaptureand
generation
• Voice frequency testing: talk/listen, send/receive tones,
noise measurements
• ATMtestingat1.5,2,34,45,155,622Mbit/sand2.5Gbit/s
• ATMtrafficgeneration,ATMQoSmeasurements,ATMAd-
aptationLayer(AAL0,AAL1,AAL2,AAL5)tests
• IPoverATMtesting,ATMDSLDSLAMtest
bENEfITS
• SDH/PDH/ATMfeature-rich
• Lightweightandhighlyportable
• Eliminatestheneedformultipleandheavierinstruments
without compromising test features or accuracy
• Intuitiveandeasy-to-use
• Cost-effectiveandfuture-proof
• Increasesefficiency
• Consolidatestrainingandshortensthelearningcurve
• Handlesmultipletasksincludinginstallation,maintenance,
troubleshooting, and commissioning
Benchtop performance in a handheld test set - the SunSet SDH
2 SunSet® SDH
appLICaTIONSInstallation, Maintenance, Troubleshooting & Commissioning
The SunSet SDH is the ideal product for installation and bringing
into service tasks in the field and central office. Commission-
ing and acceptance tests can be performed with the same test
set, as jitter and wander features are part of the conformance
procedures. Maintenance and troubleshooting in-service tasks
can also be completed with the same handheld test set saving
time and money.
Out-of-Service Testing
• End-to-endBERT
• BringingintoServiceperITU-TM.2110
• ATMtesting
• Tracegeneration
• Roundtripdelay
• NEverification
• Pulsemaskanalysisat1.5M,2M,34M,and45M
• Voicefrequencytesting:Talk/listen,send/receivetones
• MuxTest
• Jittertests
– Jitter generation and measurement
– Jitter tolerance and transfer measurement
– Pointer/mapping jitter test
• Wandertests
In-Service Monitoring
• Throughprotectedmonitoringpointsoropticalsplitters
• Linethroughandpayloadthroughmode
• ErrorperformanceanalysisperG.826,G.828,G.829,
M.2101
• SDHoverheadbytesdecode
• Pointermonitoring
• APStimingmeasurementandAPScapture
• In-servicetributaryscan
• Voicetrafficmonitoring
• In-servicejitter/wandermeasurements
• Troubleshootingsynchronizationproblems
STM-16Optical Ring
ADM
ADM ADM
ADM Tx
Rx
Tx
Rx
NE NE
SDH/PDHinterface
Network
NE
Jitter Measurement
Jitter Generation
Tx
Rx
Rx
Tx
NE
Jitter
Error
NE
Wander Measurement
Tx
L1-Rx
L2-Rx
Rx
Tx
Primary ReferenceClock/Signal
ExternalClock
STM-16Optical Ring
ADM
ADM ADM
ADM Rx
Through mode
Out-of-Service testing
Round trip delay
Jitter generation/measurement
Jitter tolerance/transfer measurements
MuxTest, Pointer jitter tests
Wander testing
In-Service monitoring
High rate side Low rate side
Rx
RxTx
Tx
3www.sunrisetelecom.com
SDH SpECIfICaTIONS2.5G/622M/155M/52M Optical (STM-16/4/1/0)Port/Connector:FCUPCorSCUPCLinecoding:NRZMode:Singleandmulti-modecompatibleCompliestoITU-TG.957Framing:ConformstoITU-TG.707Mapping:ConformstoITU-TG.707
TransmitterClock sourceInternal:±4ppm– Bitrates2.5Gbit/s,622Mbit/s,155Mbit/s,52Mbit/s:±4ppmFrequencyoffset– 2.488Gbit/s±50ppmin1,10ppmsteps– 622.080Mbit/s±50ppmin1,10ppmsteps– 155.520Mbit/s±50ppmin1,10ppmsteps– 51.840Mbit/s±50ppmin1,10ppmstepsLoop:RecoveredfromreceivedsignalExternal:Synchronizationtoexternal1.544MHzor2.048MHzvia1.5/2MExternalClockinput
1.5/2M-L2-Rx:Synchronizationtoexternal1.544Mbit/sor2.048Mbit/s via 1.5/2M Line 2 input
Output power range155/622 Mbit/s– 1310nmIntermediateReach:-8to-15dBm– 1310nmLongReach:+2to-3dBm– 1550nmLongReach:+2to-3dBm2.5 Gbit/s– 1310nmShortReach:-3to-10dBm– 1310nmIntermediateReach:0to-5dBm– 1310nmLongReach:+3to-2dBm– 1550nmIntermediateReach:0to-5dBm– 1550nmLongReach:+3to-2dBmLaserSafety:IEC825-1,Class1,21CFR1040.10&1040.11
ReceiverFrequencyrecoveryrange2.48832Gbps±50ppm622.080Mbps±50ppm155.520Mbps±50ppm51.840Mbps±50ppm
Wavelength:1280-1580nmInput power range
155/622 Mbit/s– 1310nmIntermediateReach:-30dBm– 1310nmLongReach:-30dBm– 1550nmLongReach:-30dBm2.5 Gbit/s– 1310nmShortReach:-18dBm– 1310nmIntermediateReach:-18dBm– 1310nmLongReach:-28dBm– 1550nmIntermediateReach:-18dBm– 1550nmLongReach:-28dBm
Maximuminputpower– 1310/1550nmShortorIntermediateReach:+3dBm– 1310/1550nmLongReach:-5dBm
155M Electrical (STM-1)Port/Connector:75ΩunbalancedBNC(f)Linecoding:CMIFraming:ConformstoITU-TG.707Mapping:ConformstoITU-TG.707
Transmitter Clock source
Internal−Bitrate:155.520Mbit/s±4ppmFrequencyoffset:155.520Mbit/s±50ppmin1,10,100ppmstepsLoop:RecoveredfromreceivedsignalExternal:Synchronizationtoexternal1.544MHzor2.048MHzvia1.5/2MExternalClockinput
1.5/2M-L2-Rx:Synchronizationtoexternal1.544Mbit/sor2.048Mbit/s via 1.5/2M Line 2 input
Pulseshape:155MelectricalconformstoITU-TG.703
ReceiverFrequencyrecoveryrange:155.520Mbit/s±150ppmInput sensitivityTerminate:12.7dBcablelossMonitor:20dBresistivelossplus12dBcableloss
Jittertolerance:ConformstoITU-TG.825Impedance:75Ω unbalanced
52M Electrical (STM-0)Port/Connector:75ΩunbalancedBNC(f)Linecoding:B3ZSFraming:ConformstoITU-TG.707AnnexAMapping:ConformstoITU-TG.707
TransmitterClock Source
Internal −Bitrate:51.840Mbit/s±5ppmFrequencyoffset:51.840Mbit/s±500ppmin1,10,100ppmstepsLoop:Recoveredfromreceivedsignal
Pulseshape:ConformstoITU-RF.750-3
ReceiverFrequencyrecoveryrange:51.840Mbit/s±500ppmInput sensitivity Terminate:10.8dBcablelossMonitor:+3to-26dBresistiveloss
Impedance:75Ω unbalanced (f)
PayloadsITU-TandETSImapping:ManualandgraphicconfigurationVC4-16cBulk,VC4-4cBulk,VC4Bulk,VC3Bulk,VC12Bulk,VC11Bulk,139M,45M,34M,2MAsync,1.5MAsync
Framed,Unframed,StructuredPDHpayloads
Test PatternsSTM-16(VC4-16c):231-1, 223-1, 220-1, 215-1, 211-1,All0s,All1s,Alt1010,1-8,1-16
STM-16(VC4-4candbelow):223-1, 220-1, 215-1, 211-1,All0s,All1s,Alt1010,1-8,1-16
STM-4,STM-1,STM-0:223-1, 220-1, 215-1, 211-1,All0s,All1s,Alt1010,1-8,1-16
User:10userpatternsdefinedupto16bitsTest pattern inversionUnselectedchannels:Unequipped,Broadcast
4 SunSet® SDH
SDH Error InjectionBit,B1,B2,B3,MS-REI,HP-REI,LP-REI,BIP-2Programmableerrorburst1to9999count,orerrorrate2x10-3 to 1x10-9
FASerrorinjectioninperiodicmode(burstofMerrorseveryNframes)
SDH Alarm GenerationLOS,LOF,MS-AIS,MS-RDI,AU-AIS,AU-LOP,HP-RDI,HP-UNEQ,TU-AIS,TU-LOM,LP-UNEQ,TU-LOP,HP-PLM,LP-PLM,LP-RFI,LP-RDI, RS-TIM, HP-TIM, LP-TIM
EnhancedRDI[HP/LP-SRDI(Server),HP/LP-CRDI(Connectivity),HP/LP-PRDI (Payload)]
Alarm generation in continuous or repetitive mode (burst of M framesoutofNframes)
SDH Measurements (2.5G, 622M, 155M, 52M)Errors:Bit,B1,B2,B3,BIP-2,MSREI,HPREI,LPREIAlarms:LOS,LOF,OOF,MS-AIS,MS-RDI,AU-AIS,AU-LOP,HP-RDI,HP-UNEQ,TU-AIS,TU-LOM,LP-UNEQ,TU-LOP,HP-TIM,LP-TIM,HP-PLM,LP-PLM,LP-RFI,LP-RDI,EnhancedRDI[HP/LP-SRDI(Server), HP/LP-CRDI (Connectivity), HP/LP-PRDI (Payload)], ExtendedPLM(LP-EPLM)
Performance:ITU-TG.821,G.826,G.828,G.829,M.2101/M.2110Optical power level measurementAccuracy:±1dBmOptical reception saturation indication
Frequencymeasurements(testinterfaceandpayload):Movingbargraphofslipcount,maxfrequency,minfrequency,frequencydeviationinppm,clockslips,maxpositivewander,maxnegativewander
Automatictributaryscan:80characters/linereportofalarms/errorspertributary.In-serviceandout-of-servicefor1.5M,VC11Bulk,2M,VC12Bulk,34M,45M,139M,VC3Bulk,andVC4BulkinsideSTM1/4/16 with full report.
SDH Overhead FeaturesOverhead monitor and decodeTextencodingofallapplicablebytes(K1,K2,S1,C2,etc.)FullSOH/POHOverheadbytescontrolinbinaryorHEXformat
ProgrammingK1,K2APSsignallingbytesperITU-TG.783&G.841Trace generationJ0Sectiontrace/generation:1byteSAPIformator16bytesE.164ASCII+CRC-7
J1/J2Pathtrace/generation:16bytesE.164ASCIIsequence+CRC-7or64bytesE.164ASCIIsequence
ThroughmodeforJ0,J1,J2bytesStores up to 5 traces per byte with alphanumeric labelsProgrammableexpectedtracedataforJ0,J1,andJ2bytes
Path overhead monitor and decodeTextencodingofallapplicablebytes(K1,K2,S1,C2,etc.)
Programmable POH bytesDCCBERtestingthroughD1toD3,D4toD12bytesOrderwire:Talk/listenthroughE1,E2bytesPointer monitor AU(bytesH1andH2),TU(bytesV1andV2)Display number of pointer operations with respect to time− Instantaneous pointer value display− Graphical display of pointer movements with histogram
format
Pointer adjustmentProgrammingofpointervalue,NDF,andSSbitsIncrease and decrease the pointer value
SONETmode:SettingSSbitstogenerate/detectSONETsignalPointeroffset:Lineorpayloadoffsetin±1,10ppmsteps
SDH-PDH Mux/Demux TestingUsingtwosetsofphysicalports:2Tx/2RxThefollowingcombinationsareapplicable:
• 2.5G 0/139M • 622M 0/139M • 155M 0/139M
• 2.5G 0/45M • 622M 0/45M • 155M E (0)/45M
• 2.5G 0/34M • 622M 0/34M • 155M E (0)/34M
• 2.5G 0/2M • 622M 0/2M • 155M E (0)/2M
• 2.5G 0/1.5M • 622M 0/1.5M • 155M E (0)/1.5M
MuxTest:ThetestpatternisgeneratedontheloworhighspeedportandtheBERTismeasuredontheoppositeport
MuxMode:Emulationofamuxfor1.5M/2Mpayloadsonly
SDH-SDH Mux/Demux Testing (SWSDHJ-116)Thefollowingcombinationsareapplicable:
• 2.5G 0/622M 0 • 622M 0/155M E (0) • 155M E (0)/52M E
• 2.5G 0/155M E (0) • 622M 0/52M E • 155M E (0)/45M
• 2.5G 0/52M E
Through ModeLine throughPayload throughAllSOHbytescanbemodifiedexceptforB1,B2,H1,H2bytesAlarms/errorinsertion:LOS,LOF,MS-AIS,MS-RDI,B1,B2,MS-REI
Pointer Test SequencesSpecification:ITU-TG.783AU or TU pointerSequences:Single,burst,phase,transientburst,periodic,87-3,26-1,opposite(increase+decrease),andcustom
Movement:Increase,decrease,increase+decreaseAnomalies:Added,cancel,andnone
Tandem Connections MonitoringN1byteforHighOrderPaths(VC-3/VC-4)N2byteforLowOrderPaths(VC-11/VC-12)Analysis of data, display of data in the form of alarms, performance figures,andAPIdmessagesasspecifiedinITU-TG.707
Generationanddetectionofthefollowingparameters:Loss of Tandem Connection (LTC)Loss of Multiframe (LOM)IncomingErrorCount(IEC)TandemConnectionRemoteErrorIndication(TC-REI)Tandem Connection Alarm Indication Signal (TC-AIS)Tandem Connection Remote Defect Indication (TC-RDI)Tandem Connection Outgoing Defect Indication (TC-ODI)TandemConnectionOutgoingErrorIndication(TC-OEI)TandemConnectionUnEquipped(TC-UNEQ)TandemConnectionErrorsDifference(TC-DIFF)
Graphical display
5www.sunrisetelecom.com
Automatic Protection Switch Time MeasurementMeasures time that anomaly is presentResolution:1msAnomalyselection:MS-AIS,B2errors,B3error,AU-AIS,TU-AIS,LOSSelectableswitchtimetodisplayPASSorFAILSelectable gate time to control the minimum interval for the circuit
to be anomaly timeAPStimingat2Minterfaces:2M-AIS,2M-LOSAPS bytes captureCaptureanddecodestatesofK1/K2bytes– Store hundreds of messages– Ring and linear decoding125 µs resolutionOptional trigger with wildcardsTimestamp in frames or msDuration in absolute or elapsed timeSave or print resultsLoad and decode past results
Service disruption (bulk payloads)
pDH/T-CaRRIER SpECIfICaTIONS139MPort/Connector:75ΩunbalancedBNC(f)Linecoding:CMI
TransmitterClock source
Internal −Bitrate:139.264Mbit/s±5ppmFrequencyoffset(astestinterfaceandasapayload):139.264Mbit/s±150ppmin1,10,100ppmsteps
Loop:RecoveredfromreceivedsignalPulseshape:ConformstoITU-TG.703Framing:Unframed,framed,structuredperITU-TG.751
ReceiverFrequencyrecoveryrange:139.264Mbit/s±150ppmInput sensitivityTerminate:12dBcablelossMonitor:20dBresistivelossplus12dBcableloss
Jittertolerance:ConformstoITU-TG.823Impedance:75Ω unbalanced
45MPort/Connector:75ΩunbalancedBNC(f)Linecoding:B3ZS
TransmitterClock source
Internal −Bitrate:44.736Mbit/s±5ppmFrequencyoffset(astestinterfaceandasapayload):44.736Mbit/s±500ppmin1,10,100ppmsteps
Loop:RecoveredfromreceivedsignalPulseshape:ConformstoITU-TG.703Framing:Unframed,M13,andC-bit
ReceiverFrequencyrecoveryrange:44.736Mbit/s±500ppmInput sensitivityTerminate:Upto-6dBcablelossMonitor:+6dBto-26dBresistiveloss
Jittertolerance:ConformstoITU-TG.824Impedance:75Ω unbalanced
34MPort/Connector:75ΩunbalancedBNC(f)Linecoding:HDB3
TransmitterClock source
Internal −Bitrate:34.368Mbit/s±5ppmFrequencyoffset(astestinterfaceandasapayload):34.368Mbit/s±500ppmin1,10,100ppmsteps
Loop:RecoveredfromreceivedsignalPulseshape:ConformstoITU-TG.703Framing:Framed,unframed,structuredperITU-TG.751
ReceiverFrequencyrecoveryrange:34.368Mbit/s±500ppmInput sensitivity Terminate:-12dBcablelossMonitor:-20dBresistivelossplus-12dBcableloss
Jittertolerance:ConformstoITU-TG.823Impedance:75Ω unbalanced
Dual 2MPort/Connector120Ω balanced RJ-45 (f) (SSSDHJ-RJ45)120Ω balancedbantam(SSSDHJ-BTM)
Linecoding:AMI,HDB3
Transmitters (Lines 1 and 2)Clock source
Internal −Bitrate:2.048Mbit/s±5ppmFrequencyoffset(astestinterfaceandasapayload):2.048Mbit/s±5000ppmin1,10,100,1000ppmsteps
Externalclockinputport:2.048MHzRecoveredfromLine2input(2.048Mbit/s)Loop:Recoveredfromreceivedsignal
Pulseshape:ConformstoITU-TG.703forbalanced(120Ω) interfacesFraming:Unframed,PCM-30/30C,PCM-31/31CconformstoITU-TG.704FractionalE1Errormeasurements,channelconfigurationverificationNx64kbit/s(consecutive)orMx64kbit/s(nonconsecutive),N/M=1to30or1to31
SetTxandRxchannelsindependentlyThroughmode:Testpatternonselectedchannels;allothersthrough
Receivers (Lines 1 and 2)Frequencyrecoveryrange:2.048Mbit/s±5000ppmInput sensitivityTerminate,Bridge:+6to-43dBwithALBOMonitor:-20dBresistivelossplus-6dBcableloss
Jittertolerance:ConformstoITU-TG.823ImpedanceTerminate,Monitor:120Ω balancedBridge:>1200Ω
6 SunSet® SDH
Dual 1.5MPort/Connector100Ω balanced RJ-45 (f) (SSSDHJ-RJ45)100Ω balancedbantam(SSSDHJ-BTM)
Linecoding:AMI,B8ZS
Transmitters (Lines 1 and 2)Clock source
Internal −Bitrate:1.544Mbit/s±5ppmFrequencyoffset(astestinterfaceandasapayload):1.544Mbit/s±500ppmin1,10,100ppmsteps
Externalclockinputport:1.544MHzRecovered from Line 2 input (1.544 Mbit/s)Loop:Recoveredfromreceivedsignal
Pulseshape:ConformstoITU-TG.703Framing:Unframed,SF-D4,ESF.ConformstoANSIT1.102,107,107A,403,and404.AlsoTelcordiaTR-TSY-000009andTR-TSY-000191.
FractionalT1Errormeasurements,channelconfigurationverificationNx64kbit/sorNx56kbit/s(consecutiveornonconsecutive),N=1to24SetTxandRxchannelsindependently
Throughmode:Testpatternonselectedchannels;allothersthrough
Receivers (Lines 1 and 2)Frequencyrecoveryrange:1.544Mbit/s±500ppmInput sensitivity Terminate,Bridge:+6to-36dBcablelossMonitor:-15to-25dB,resistiveloss
Jittertolerance:ConformstoITU-TG.824ImpedanceTerminate,Monitormode:100Ω balancedBridge:>1000Ω
Test Patterns223-1, 220-1, 215-1, 211-1, 29-1, 27-1, 26-1,All0s,All1s,Alt1010,20ITU,QRS,1-8,1-16,3-24
User:10userpatternsdefinedupto32bitsTest pattern inversion
PDH/T-Carrier Error Injection139M,34M:Code,Bit,FAS45M:Code,Bit,Frame,C-bit,P-bit,FEBE2M:Code,Bit,CRC-4,E-bit,FAS1.5M:BPV,Logic,CRC-6,FrameProgrammableerrorburst1to9999countorerrorrate2x10-3 to 1x10-9
PDH/T-Carrier Alarm Generation139M,34M:AIS,FASRAI45M,1.5M:AIS,Yellow,Idle2M:AIS,FASRAI,MFASRAI
PDH/T-Carrier Measurements (139M, 45M, 34M, 2M, 1.5M)ErrortypeCode,bit,FASE(2M,8M,34M,139M)CRC-4,E-bit(2M)Code(BPV),F-bit,P-bit,C-bit,FEBE,CRC-6(1.5M,45M)
Typicalerrortypereports:Totalerrorcount,errorrate,ES,%ES,SES,%SES,UAS,%UAS,EFS,%EFS,AS,%AS
ITU-T G.821 analysisITU-TG.826analysis:Basedonanomalies,defects,farendindications
M.2100analysis(MaintenanceorBIS)Alarm statistics Lossofsignalseconds,LossofFrameseconds,AISsecondsFASRAIseconds(2M,34M,139M)MFASRAIseconds(2Monly)Yellowalarmseconds(1.5M,45M)Lowdensityseconds,excess0sseconds(1.5M)
Frequencymeasurements:Movingbargraphofslipcount,maxfre-quency,minfrequency,frequencydeviationinppm,clockslips,maxpositivewander,maxnegativewander
Signallevelmeasurement(1.5/2M/34M/45M)
PDH Mux/Demux TestingUsingtwosetsofphysicalports:2Tx/2RxThefollowingcombinationsareapplicable:
• 139M/34M • 45M/2M • 34M/2M
• 139M/2M • 45M/1.5M
MuxTest:ThetestpatternisgeneratedontheloworhighspeedportandtheBERTismeasuredontheoppositeport
Voice Frequency Testing (SWSDHJ-114) Monitor speaker with volume control Built-inmicrophone/speakerCompanding:A-law,µlawProgrammableidlechannelA,B(C,D)bits(1.5M)ABCDbitstransmitandmonitorinselectedchannel(2M)VFlevelmeasurement:+3to-60dBm,resolution0.1dBmVFfrequencymeasurement:50to3950Hz,resolution1HzVFtonegenerationVariabletone:50to3950Hz@1Hzstep.+3to-60dBm@1dBm
Peak code and coder offset measurementsNoisemeasurementsReceiver filters2M:3.1kHz,Psophometric,1010Hznotch1.5M:3kHzflat,C-message,C-notch
Pulse Mask Analysis (SWSDHJ-190)1.5M,2M,34M,and45MpulsemaskScanperiod:500nsOnscreenpulseshapedisplaywithG.703PulseMaskverificationDisplayspulsewidth,risetime,andfalltimeinns,%overshoot,%undershoot
1.5Mmasks:ANSIT1.102,T1.403,AT&TTR62411,G.70345Mmasks:ANSIT1.404,G.703
COMMON TO SDH/pDH/T-CaRRIERAuto ConfigurationSingle button configurationAutomatically scans all test interfaces for signalConfigures test set based on received signalSets rate, mapping, payload, and/or test pattern
Propagation Delay MeasurementRound trip signal transmission delayMeasures in µs and UI (Unit Intervals)
7www.sunrisetelecom.com
Measurement CriteriaTest results/events storage and events log capabilityStoresupto20testresultsor800errorsoralarmseventswithuserdefinablelabels;lock/unlockrecords,availabletoscreenvieworprint
Storesupto10userconfigurations(profiles)withalphanumericlabelsPrint on event can be enabled or disabledPrintattimedinterval(settablefrom2minupto999hr59min)Measurementdurationcontinuousortimed(settableupto999hr,59min)
Elapsedtime,remainingtimeProgrammable start date and timeAudiblealarm:On/offswitchable
Histogram AnalysisErrors/Alarms/Pointergraphicdisplayinreal-timeStorescurrentresultswith1-secondresolutionforthelast60min-
utes, 1-minute resolution for the last 72 hours, and 15-minute resolution for the last 57 days
CSVformatstorage
Status and Alarm IndicatorsPowerandlowbatteryLEDindicatorsPatternSyncandBitError139MandSTM-N(signal),Alarm,Frame,Errors,Pointer,ATMcell8M,34Mand45M(signal),Alarm,Frame,andErrors1.5/2M-L2,Alarm,Errors1.5/2M-L1,Alarm,Errors
jITTER gENERaTION & MEaSUREMENTSDH Jitter
Jitter Measurement Measurementrange:AccordingtoITU-T0.172
Wideband Jitter Measurement–155.520Mbit/s(500Hzto1.3MHz)(SWSDHJ-155MJIT)–622.080Mbit/s(1kHzto5MHz)(SWSDHJ-622MJIT)–2.488Gbit/s(5kHzto20MHz)(SWSDHJ-25GJIT)Highband Jitter Measurement–155.520Mbit/s(65kHzto1.3MHz)(SWSDHJ-155MJIT)–622.080Mbit/s(250kHzto5MHz)(SWSDHJ-622MJIT)–2.488Gbit/s(1MHzto20MHz)(SWSDHJ-25GJIT)
PASS/FAILthreshold:PerITU-TG.825oruserdefinedTestrates:155.520Mbit/s,622.080Mbit/s,2.488Gbit/sParameters:Currentpeak-peak,Maximumpeak-peak,RMS,MaximumRMS,Current+peakand–peak,Maximum+peakand–peak,
Units:UI(UnitInterval)Resolution:0.01UITestduration:TimedorcontinuousStorageUpto100,000measurementintervals20records
Measurementinterval:1secondJitter histogram
Jitter GenerationModulationsourcetype:SinusoidalJitteramplitude/frequency:ConformstoITU-TO.172
Jitter Tolerance MeasurementPASS/FAILtemplate:ConformstoITU-TG.825Testfrequencies:Upto30pointsTechnique:OnsetoferrorsStorage:Upto20records
Fast Jitter Tolerance MeasurementPASS/FAILtemplate:SettoITU-TG.825bydefaultUserprogrammabletemplate(frequencypoints&litudevalues)Technique:OnsetoferrorsStorage:Upto20records
Jitter Transfer MeasurementPASS/FAILtemplate:ConformstoITU-TG.825155.520Mbit/s(500Hzto1.3MHz)622.080Mbit/s(1kHzto5MHz)2.488Gbit/s(5kHzto20MHz)
Testfrequencies:Upto30pointsStorage:Upto20records
PDH/T-Carrier Jitter
Jitter MeasurementMeasurementrange:AccordingtoITU-TO.171andO.172
Wideband Jitter Measurement–1.544Mbit/s(10Hzto40kHz)(SWSDHJ-DSnJIT)–2.048Mbit/s(20Hzto100kHz)(SWSDHJ-PDHJIT)–34.368Mbit/s(100Hzto800kHz)(SWSDHJ-PDHJIT)–44.736Mbit/s(10Hzto400kHz)(SWSDHJ-DSnJIT)–139.264Mbit/s(200Hzto3.5MHz)(SWSDHJ-PDHJIT)Highband Jitter Measurement–1.544Mbit/s(8kHzto40kHz)(SWSDHJ-DSnJIT)–2.048Mbit/s(18kHzto100kHz)(SWSDHJ-PDHJIT)–34.368Mbit/s(10kHzto800kHz)(SWSDHJ-PDHJIT)–44.736Mbit/s(30kHzto400kHz)(SWSDHJ-DSnJIT)– 139.264Mbit/s(10kHzto3.5MHz)(SWSDHJ-PDHJIT)
PASS/FAILthreshold:PerITU-TG.823,G.824oruserdefinedTest rates2.048,34.368,139.264Mbit/s1.544Mbit/s,44.736Mbit/s
Parameters:Currentpeak-peak,Maximumpeak-peak,RMS,MaximumRMS,Current+peakand–peak,Maximum+peakand–peak
Units:UI(UnitInterval)Resolution:0.01UIp-pAccuracy:PerITU-TO.171andO.172Testduration:TimedorcontinuousStorageUpto100,000measurementintervals20records
Measurementinterval:1secondJitter histogram
Jitter GenerationModulationsourcetype:SinusoidalJitteramplitude/frequency:ConformstoITU-TO.171
8 SunSet® SDH
Jitter Tolerance MeasurementPASS/FAILtemplate:PerITU-TG.823,G.824Testfrequencies:Upto30pointsTechnique:OnsetoferrorsStorage:Upto20records
Fast Jitter Tolerance MeasurementPASS/FAILtemplateSettoITU-TG.823(for2M,34M,139M)Set to ITU-T G.824 (for 1.5M, 45M)
Userprogrammabletemplate(frequencypoints&litudevalues)Technique:OnsetoferrorsStorage:Upto20records
Jitter Transfer MeasurementPASS/FAILtemplate:PerITU-TG.735,G.736,G.737,G.742,G.751,G.7521.544Mbit/s(from10Hzto40kHz)2.048Mbit/s(10Hzto100kHz)34.368Mbit/s(100Hzto800kHz)44.736Mbit/s(10Hzto400kHz)
Testfrequencies:Upto30pointsStorage:Upto20records
Pointer Jitter TestSDH-PDHMuxTestmodewithPointerTestSequencesgenerationonTxside,andJittermeasurementsontheRxside
WaNDER gENERaTION & MEaSUREMENTSDH/PDH Wander MeasurementMeasurementrange:AccordingtoITU-TO.171andITU-TO.172Test interface2.048Mbit/s(SWSDHJ-TIE)1.544*,34.368,44.736,and139.264Mbit/s(SWSDHJ-PDHTIE)155.020Mbit/s(SWSDHJ-155MTIE)622.080Mbits/s(SWSDHJ-622MTIE)2.488Gbit/s(SWSDHJ-2.5GTIE)
Referenceclock:1.544,2.048,5,10MHz,1.544/2.048Mbit/s(L2-Rx)Parameters
Real Time MeasurementsTimeIntervalError(TIE)– Amplitude (ns)–MaximumandminimumTIEvalue
Off-linemeasurements(SWSDHJ-WAN)– MaximumTimeIntervalError(MTIE)– TimeDeviation(TDEV)– GraphicdisplayofresultsaccordingtoG.810,G.811,G.812,G.813,andG.823MTIE/TDEVmasks
– TIEdatatransferfromtestsettoPCvia10Base-Tport
Wander GenerationModulationsourcetype:SinusoidalWanderamplitude/frequency:AccordingtoITU-TO.172Test interface2.048Mbit/s(SWSDHJ-TIE)155.020Mbit/s(SWSDHJ-155MTIE)622.080Mbit/s(SWSDHJ-622MTIE)2.488Gbit/s(SWSDHJ-2.5GTIE)
Referenceclock:2.048MHz
*Note: 1.544Mbit/sTIEmeasurementaccuracydoesnotfullymeetITU-T0.171nd0.172
aTM TESTINgMapping1.5/2M:PLCPandHEC-basedperITU-TG.804andalsonon-G.804compliant
34M:PLCPandHEC-basedperITU-TG.804withframingbasedonITU-TG.832
45M:PLCPandHEC-basedperITU-TG.804SDH:HEC-basedperITU-TG.707(mappingusingVC4andVC12)
Interface:UNIandNNIperITU-TI.361Headercontrol:GFC,VPI/VCI,PTI,CLPScrambling:OnoroffIdlecells:IdleornullC2POHHex:13(default)Pattern truncateDisplay:VPI/VCIindecimalorhexadecimalATMcellLEDindicatespresenceofvalidATMcellsOAM cell generationVCCscan:128independentheadersAAL0/1/2/5generationandanalysis
Quality of ServiceTimed or continuous measurementProgrammable start time and date
Traffic Supervision8independentVCCfilters:1foreground,7backgroundForeground:FullQoS,BERT,OAMcounter,andstatisticsBackground:TrafficstatisticsandOAMmonitoringonlyQualityofService:ErroredcellsandCER,lostcellsandCLR,misin-sertedcellsandCMR,SECBandSECBrate
ATMalarms:VP-/VC-LOC,AIS,RDI,LFMF(segment,end-to-end)Globalmeasurements:Totalcells,idlecells,HECerrors(correctableandnon-correctable),HECrate
Delaymeasurements:CellTransitDelay(CTD)(MEAN,MIN,andMAX)andCellDelayVariation(CDV)PeaktoPeak2-point(MAX,MIN)–RequirestimestampfieldorO.191testcell
Total, congested, tagged count and rate Cps (cells per second)Biterrorsandbiterrorrate,CRCerrorsOAMcellcount:F4/F5,segment/end-to-end,AIS/RDI/loopbackOAMcount:Continuitycheck,PerformancemanagementGraphicaldisplayinhistogramformatofbiterrors,CHEC,NCHEC,celllossseconds,cellerrorsandOAMcellcount(F4/F5,segment/end-to-end, AIS/RDI, loopback)
ATM View Test RecordsStoresupto20ATMtestresultswithuserdefinablelabels
Lock/unlock records, available to screen view or printTransferabletoPCinCSVformatbyusingWindowsRemoteControl
VCC ScanUpto128independentheaders:GFC,VPI,VCI,PTI,CLP,AALtypeAAL scanSaveupto8VCCconfigurationsUtilization%
Cell Capture & DecodeCelltypecaptureselection:User,OAM,USER+OAMFullbufferoptiontocycleorstopTimed or continuous captureProgrammable start time and dateDisplaycellheaderandpayloadof4096cells
9www.sunrisetelecom.com
Headerdecode:GFC,VPI/VCI,PTI,CLPOAMdecodeperITU-TI.610FaultmanagementAIS/RDI:Defecttype,defectlocationLoopback:LoopbackID,correlationtag,loopbacklocationID,
source IDPerformance managementForwardandbackwardMCSN,BEDC,BLER,TUC(0+1),TUC(0),TRCC(0+1),TRCC(0),
timestampActivation/deactivation:Message,direction,correlationtag,PMblocksizeA-B&B-A
System managementCell storageSaveupto10cellcapturescreensPrint
Traffic Generation8independentVCCs:1foreground,7backgroundForegroundVCCTraffic:ConstantBitRate(CBR),UnspecifiedBitRate(UBR)Burst,VariableBitRate(VBR),andSequentialCells
CellType:User,O.191TestCell,OAM-BCellPerformancePatterns:223-1, 220-1, 215-1,All1s,All0s,and16-bituserpatterns
BackgroundVCCsTraffic:CBRCelltype:UserPatterns:16-bitUserpatterns
AAL0Traffic:CBR,VBR/UBR,SequentialCellsPatterns:223-1, 220-1, 215-1,All1s,All0s,and16-bituserpatternsPCR:%,Mbps,Cps
AAL 1SRTS(SynchronousResidualTimeStamp):On,OffClock recovery adaptive methodPDH:1.5M,2MFrame−For1.5M:Unframe,SF-D4,ESF−For2M:Unframe,PCM-30,PCM-30C,PCM-31,PCM-31CTraffic−FixedatT1(PCR:1.741Mbps[4106Cps])−FixedatE1(PCR:2.309Mbps[5446Cps])Patterns:223-1, 220-1, 215-1,All1s,All0s,and16-bituserpatterns
AAL 2LengthCID (Channel Identifier)Traffic:CBR,VBR/UBR,SequentialCellsPatterns:223-1, 220-1, 215-1,All1s,All0s,and16-bituserpatternsPCR:%,Mbps,Cps
AAL 5CPCS-UU (Common Part Convergence Sublayer-User to User)
indication numberCPI (Common Part Indicator)Framerate:0-50
Errorinjection:Bit,HEC,andNC-HECerrors,burstandrateAlarmgeneration:F4/F5,segment/end-to-end,AIS,RDI,loopback,
continuity check
DSLAM TestingATM end-to-end connectivity test between customer premises (SSxDSL/MTT)andCO(SSSDH);back-to-backwithSunSetxDSL/MTT ATU-R Module–SunSetxDSL/MTTrequiressoftwareoptionSWxDSL-xxATM–AutodetectionofSSxDSL/MTTatfarend
Bidirectional,asymmetricDSLthroughputtestingUpstream and downstream statisticsTxandRxcellratesCellloss%Biterrorcount,BER,andbiterrorinjection
ClearPass/FailindicationTest results available on both units
ATM/IP PING TestProtocolsRFC1483:LCC-Bridge(static&dynamic[DHCP])&LCC-RouteRFC2364:PPPoverATM(PPPoA)RFC2516:PPPoverEthernet(PPPoE)RFC2225:ClassicalIPandARPoverATMInARP− InARPRequesttoFarEnd− InARPRequestSent,Received− In ARP Response Received, Sent− In ARP Response from− InARPRequestfrom
NumberofPINGs:Upto65535PINGlength:1to1500bytesUser selectable bit rate down to 1 kbit/sClearPass/FailindicationStatisticsPINGssent,state,received,unreachable,missingRoundtrip:Current,average,maximum,andminimum
PINGresponse/echo:Time,IPaddresses,totalPINGs
pRODUCT DESCRIpTIONUpgrades:SWoptionsupgradeableviasoftwarein-fieldcartridge
replacementDisplay:Backlit320x240pixelsSTNindoor/outdoorColorscreenwithCFLBacklight
Printer:Reportprintingviaserialport,RS-232DIN-9Network:10Base-TDIN-9Battery:Built-inNiMHrechargeablebatterypackPower:ACoperationw/100to240VAC,50/60HzuniversalchargerEnvironmentalOperatingtemperature:32to113°F(0to45°C)Storagetemperature:-4to158°F(-20to70°C)Humidity:5%to90%noncondensing
DimensionsSize:4.3x2.8x10.6in(11x7x27cm)Weight: 3.3lb(1.5kg)
©2007SunriseTelecomIncorporated.Allrightsreserved.Specificationssubjecttochangewithoutnotice.Allproductandcompanynamesaretrademarksoftheirrespectivecorporations.
SunriseTelecomSanJose,Modena,andTaiwanfacilitiesareISO9001certified.Donotreproduce,redistribute,orrepostwithoutwrittenpermissionfromSunriseTelecom.C_0129_REV.C00Sept.2008
Formoreinformationoradirectoryofsalesoffices: [email protected] www.sunrisetelecom.com
ORDERINg INfORMaTIONSSSDHC-STM16J SunSetSDHCJitterandWander,2M,34M,155Mtest
interfaces.RS-232C&10Base-Tports.[Includes 1.5M, 45M, 52M electrical and 139M test interfaces, PDH
Mux-Demux Testing, Histogram Analysis, Windows Remote Control, APS Timing, Pointer Test Sequences,
Tandem Connections Monitoring, & standard warranty]
Optics OptionsSSSDHJ-NONE Electricalonlyunit.(BNC)NoopticalConnectorsSSSTM1-13IR OpticalInterface,STM-0/11310nmIntermediateReachSSSTM1-13L/15L OpticalInterface,STM-0/11310nm/1550nmLongReachSSSTM4-13IR OpticalInterface,STM-0/1/41310nmIntermediateReachSSSTM4-13L/15L OpticalInterface,STM-0/1/41310nm/1550nm
Long ReachSSSTM16-13IR OpticalInterface,STM-0/1/4/161310nmIntermediate
ReachSSSTM16-13I/15I OpticalInterface,STM-0/1/4/161310nm/1550nm
Intermediate ReachSSSTM16-13L/15L OpticalInterface,STM-0/1/4/161310/1550nm
Long Reach
Optical Interface Connector Options
SSSDHJ-FC FCUPCOpticalConnectorsSSSDHJ-SC SCUPC Optical Connectors
Electrical Interface Connector OptionsSSSDHJ-RJ45 1.5/2M RJ-45 ConnectorsSSSDHJ-BTM 1.5M/2MBantamConnectors
Standard & Configurable Accessories OptionsSSSDHC-101 SunSetSDHUser’sManualSA904 TrainingCDSS138E SunSetACAdapter,100-240VAC,50/60Hz,3-
pronginput,[email protected] [Only for use with SunSets with NiMH battery pack]
Power CordSA155-EU 2-prongpowercordplusgroundforuseinEurope (ExceptUK)SA155-NA 3-prongpowercordforuseinLatinAmerica,North
America, and AsiaSA155-UK 3-prongpowercordforuseinUnitedKingdom
WarrantySSSDHC-W3 Standard3yearwarrantySSSDHC-W4 Extendsstandardwarrantyto4years [Excludes Battery and Accessories, which are
warranted for one year]
Calibration Data DocumentSSSDHC-CCM Calibration Test Measurement Data
Software PackagesSWSDHJ-PDHJIT PDH Jitter Generation and MeasurementSWSDHJ-DSnJIT T-Carrier Jitter Generation and MeasurementSWSDHJ-155MJIT STM-1 Jitter Generation and MeasurementSWSDHJ-622MJIT STM-4 Jitter Generation and MeasurementSWSDHJ-25GJIT STM-16 Jitter Generation and MeasurementSWSDHJ-SDHJIT SDH Jitter Generation and Measurement Package [Includes SWSDHJ-155MJIT, SWSDHJ-622MJIT, and
SWSDHJ-25GJIT]SWSDHJ-TIE 2MTIEGenerationandMeasurementSWSDHJ-PDHTIE PDHTIEMeasurementsSWSDHJ-155MTIE 155MTIEGenerationandMeasurementSWSDHJ-622MTIE 622MTIEGenerationandMeasurementSWSDHJ-2.5GTIE 2.5GTIEGenerationandMeasurementSWSDHJ-SDHTIE SDHTIEMeasurementPackageSWSDHJ-WAN MTIE/TDEVWanderMeasurementsSWSDHJ-114 VoiceFrequencyTestingSWSDHJ-116 SDH-SDHMux/DemuxTestingSWSDHJ-129 1.5MbpsATMTesting [Includes User’s Manual SSSDHC-101-3] SWSDHJ-130 2MbpsATMTesting [Includes User’s Manual SSSDHC-101-3]SWSDHJ-131 45MbpsATMTesting [Includes User’s Manual SSSDHC-101-3]SWSDHJ-132 34and155MbpsATMTesting [Includes User’s Manual SSSDHC-101-3]SWSDHJ-133 622MbpsATMTesting [Includes User’s Manual SSSDHC-101-3]SWSDHJ-134 2.5GbpsATMTesting [Includes User’s Manual SSSDHC-101-3]SWSDHJ-ATM ATM Software Package [Includes SWSDH-130 and SWSDH-132]SSSDHJ-ATM VC12ATMTestingSWSDHJ-190 PulseMaskAnalysis
Optical AccessoriesSA501 OpticalPatchCord,SMF,FCUPCtoFCUPC,6’SA502 OpticalPatchCord,SMF,FCUPCtoSCUPC,6’SA503 OpticalPatchCord,SMF,FCUPCtoSTUPC,6’SA508 OpticalPatchCord,LCUPCtoSCUPC,6’SA509 OpticalPatchCord,LCUPCtoFCUPC,6’SA511 OpticalPatchCord,SCUPCtoSCUPC,6’SA512 OpticalPatchCord,SCUPCtoSTUPC,6’SA521 OpticalAttenuator,FC-PC,-10dBSA523 OpticalConnectorAdapter,FCUPCtoSCUPC [Changes a FC (f) appearance to a SC (f)]SA524 OpticalConnectorAdapter,SCUPCtoFCUPC [Changes a SC (f) appearance to a FC (f)]SA531 OpticalAttenuator,SC-PC,-10dBSA541 OpticalSplitter,FC-PC,90/10SA545 OpticalSplitter,FC-PC,50/50SA551 OpticalSplitter,SC-PC,90/10SA555 OpticalSplitter,SC-PC,50/50