by joshua. water saving device– multi-flush tank basin tap toilet lid toilet bowl hot & cold...
TRANSCRIPT
Multi FlasherBy Joshua
Water Saving Device– Multi-Flush
Tank
Basin
Tap
Toilet Lid
Toilet Bowl
Hot & Cold Water
Flusher
Saving WaterHow
Benefits
Washes hand and Face then the water used to wash hands & face stored in the tanker
Stored water is used to flush toilet
Uses same water twiceAustralia's first 5 star
rated toilet suiteSmart way Saving Water Cost is not expensive
Buy at many Bathroom Stores
How to make ToiletFlexible water supply tube $50.00, size 500 centremetres
Flange bolts Wax Ring
Cont...1. Turn of the water before starting2. Apply the installation template with all measurements to make
sure you centre the hole.3. Install mounting brackets for toilet and basin to be secure 4. Install a Wax Ring and the flash way5. Screw Toilet lid than install the toilet and basin as one, on the
Wax ring/ Flash way 6. Secure toilet to mount brackets on the floor and secure basin
on the wall 7. Attach the supply line to the taps and tank 8. Remove Flash cartridge 9. Hook up supply line and secure tank bolts10. Replace flush cartridge and turn on the water 11. Apply silicone to base of toilet and around the basin on the
wall.12. Put on Taps hot/Cold and secure all screws
Material Cost Where
Toilet, one-piece or two-piece with basin includes: taps, toilet lids
$675.40 Caroma Bathroom Store
Caroma Mixer Tap $175.00 Caroma Bathroom Store
One x Putty knife $15.99 Bunning Warehouse
One x Wax bowl ring size
$95.00 Bunning Warehouse
4 x Flange bolts size $25.00 Bunning Warehouse
1 tube x Silicone $7.62 Bunning Warehouse
2x Flexible water supply tube 500 cm
$29.90per mtre Bunning Warehouse
1 tube Plumber’s putty Bunning Warehouse
Toilet and Installation Cost