GF Piping Systems

Butterfly Valve 565

Lightweight, highly reliable and cost-eff ective

Beats metal in every round

2

The Butterfl y Valve 565 comes in the same installation length

as metal solutions. The exchange does not require any addi-

tional work on the pipes or new designs. This reduces the

eff ort of both planning and installation, also thanks to a light-

er weight.

The Butterfl y Valve 565 is built to last. High-performance

thermoplastics protect it from abrasion and corrosion. This

guarantees a longer system lifetime, even under harsh con-

ditions such as water hammers. The results are a reduction

of both maintenance costs and production stops.

Thanks to its low weight, a single person can lift and install

the Butterfl y Valve 565 in just a few minutes. This also facili-

tates planning, since the low weight signifi cantly reduces the

need for costly transportation and personnel.

Direct Replacement

Highly reliable

60% lighter

Butterfl y Valve 565

A robust lightweight

The new Butterfl y Valve 565 is the best choice for optimizing

piping systems built for water applications and a wide range

of other applications. This new generation comes at a signifi -

cantly lower initial cost, and will save even more thanks to its

lower static weight, requiring less energy for both operation

and transportation. Installing the Butterfl y Valve 565 is quick

and easy, but thanks to its extremely high durability, it will be

almost maintenance-free during its long service life.

Plastic Butterfl y Valves have already proven to outperform metal valves in almost every way, thanks to a higher resistance against corrosion and a lighter weight. Now, a new generation has arrived to beat metal in cost-eff ectiveness, too.

3

With its standard interface, the Butterfl y Valve 565 can be

upgraded with various modules, such as the smart actuator.

This allows for automation and digitization of your systems,

making them even more cost-eff ective and effi cient.

With the initial cost being comparable to metal solutions, the

Butterfl y Valve 565 outperforms its metal counterparts in the

long run, reducing maintenance costs, thanks to its superior

materials and design.

Ready for digitization

Reduced costs

The Butterfl y Valve 565 is produced by GF Piping Systems in

Seewis (Grisons), Switzerland. High-quality valves have been

produced here for over half a century. They combine techno-

logical innovation with the highest standards of material se-

lection, manufacturing and quality testing for safety, durabil-

ity and reliability.

Swiss quality

To ensure the high quality standard, the butterfl y valves are

tested under the toughest conditions in a test stand.

VS

4

Short installation length

Light weight

Corrosion resistant

High p/T performance

More than half a century ago, GF Piping Systems decided to switch from metal to plastic. This was both a revolutionary and a forward-looking step, as the disadvantages of metal have proven to be the advantages of plastic. The Butterfl y Valve 565 is the newest product of this innovation process, outperforming its metal counterparts in every way.

Butterfl y Valve 565

How plastic wins against corrosion and gravity

5

Dimension DN50-300, 2" - 12"

Pressure rating DN50-150: PN16 / DN200-250: PN10 / DN300: PN6

Materials Wafer: fibre reinforced polyamide (PA6-60) Disc: PVDF with fibre reinforced polyamide (PA6-60)

Sealing material EPDM, FKM

Shaft material Stainless steel, 1.4104 (430 F), Other shaft material on request

Installation length EN558 row 20, ISO 5752 row 20, API 609 table 2

Flange standards ISO 7005 PN10/16, EN 1092 PN10/16, DIN 2501 PN10/16, ANSI/ASME B 16.5 Class 150, BS 1560: 1989 Class 125/150; BS 4504 PN10/16, JIS B 2220 10K, JIS B 2239 10K

Mounting flange EN ISO 5211

Leak test ISO 9393-2, EN 12266 (leak rate A), ISO 5208 (Rate A)

Approvals Multiple approvals available on request

Actuation variants Manual: lockable hand lever or reduction gear with hand wheel Pneumatic: FC; FO; DA Electric: AC: 100, 230 V, AC/DC: 24 V, Smart Version

Technical Data

Sustainably future-proofGF Piping Systems is making flow sustainable: Environmental regulations, water scarcity and an increasing demand of consumers and society for greener and more sustainable solutions are an important set of trends shaping customer behavior. The Butterfly Valve 565 is another important milestone in building a more sustainable future.

The low weight of the plastic material reduces the energy and

resources needed for transport and installation. After installa-

tion, the advantages of the reduced static weight can become

even more significant.

Lower overall costs 10 tons weight saved

Lower production footprintThe waste of energy and resources in industrial production is

reduced further by the long service life, thanks to a higher re-

sistance against corrosion.

600 metal valves can be exchanged on a cruise ship, saving

10 tons in weight.

565Metal

6

2 3

4

7

7

5

6

8

10

9

1

Butterfly Valve 565

Superior material meets modular designWhen something is built to last, it is all the more important that it can be flexibly adapted to changing requirements. For high-quality plastic materials optimized for durability, modular design is the perfect match. The standard interface also ensures that the Butterfly Valve 565 stays upgradeable during its long lifespan, fit for the ever-evolving future.

1 Lockable ergonomic lever

2

3

4

5 Optional electric position indicator

8

7

6

Data-Matrix-Code

10

EPDM or FKM sleeve

Interface for flexible automation (ISO 5211)

Standard 5° ratchet setting

9

PVDF disc

Short installation length

Fiber reinforced housing and inner disc

Wafer design

7

Smart actuator for more effi ciency in the work process

Electric actuator for highest reliability and ease of usePowered by an electric motor, electrical actuators are highly

reliable and very easy to set up and operate. In addition, the

latest generation of actuators off ers many intelligent features.

Modular accessories such as electric interfaces, integrated

battery-powered fail-safe units and visual system feedback

are also available.

Pneumatic actuator for reliable operationThe pneumatic actuators are suitable for a wide range of envi-

ronments and guarantee high levels of safety and reliability

thanks to their fail-safe operation, robust design and high

functionality, such as fast cycle times and adjustable travel.

They are an economical, functional and reliable solution, espe-

cially for installations with a high number of actuated valves.

Monitoring by the double sensorThe optional LED position feedback allows the current position

of the valve to be centrally recorded and checked at any time

– for manually operated and automated valves. The compact

dual sensor fi ts even in the most tight areas and is protected

against ingress of water and dust.

Information via Data-Matrix-CodeThe Data-Matrix-Code simplifi es the storage of all technical

information for each individual valve and thus enables indi-

vidual traceability. The faultless identifi cation of each Butterfl y

Valve 565 facilitates easy installation, service and repair.

Modular process automation

Find out morewww.gfps.com/565

Reduction gear with handwheelThe smart actuator makes full use of the possibilities of digiti-

zation: Thanks to the app, you can access it at any time in order

to read data or carry out settings, for example. This makes

work easier and more effi cient than ever before.

The reduction gear with handwheel allows reliable, manual

operation of the Butterfl y Valve 565. Worm gears ensure that

only minimal physical eff ort is required. They can fully open

and close and are useful for high-stress situations.

GF Piping Systems

The information and technical data (altogether “Data”) herein are not binding, unless explicitly confirmed in writing. The Data neither constitutes any expressed, implied or warranted characteristics, nor guaranteed properties or a guaranteed durability. All Data is subject to modification. The General Terms and Conditions of Sale of Georg Fischer Piping Systems apply.

Worldwide at homeOur sales companies and representatives ensure local customer support in more than 100 countries.

www.gfps.com

Argentina / Southern South AmericaGeorg Fischer Central Plastics Sudamérica S.R.L.Buenos Aires / ArgentinaPhone +54 11 4512 02 90gfcentral.ps.ar@georgfischer.comwww.gfps.com/ar

AustraliaGeorge Fischer Pty LtdRiverwood NSW 2210Phone +61 (0) 2 9502 8000 australia.ps@georgfischer.comwww.gfps.com/au

AustriaGeorg Fischer Rohrleitungssysteme GmbH3130 HerzogenburgPhone +43 (0) 2782 856 43-0austria.ps@georgfischer.comwww.gfps.com/at

Belgium / LuxembourgGeorg Fischer NV/SA1600 Sint-Pieters-Leeuw / BelgiumPhone +32 (0) 2 556 40 20Fax +32 (0) 2 524 34 26be.ps@georgfischer.comwww.gfps.com/be

BrazilGeorg Fischer Sist. de Tub. Ltda.04571-020 São Paulo/SPPhone +55 (0) 11 5525 1311br.ps@georgfischer.comwww.gfps.com/br

CanadaGeorg Fischer Piping Systems LtdMississauga, ON L5T 2B2Phone +1 (905) 670 8005Fax +1 (905) 670 8513ca.ps@georgfischer.comwww.gfps.com/ca

ChinaGeorg Fischer Piping Systems Ltd Shanghai 201319Phone +86 21 3899 3899 china.ps@georgfischer.comwww.gfps.com/cn

Denmark / IcelandGeorg Fischer A/S2630 Taastrup / DenmarkPhone +45 (0) 70 22 19 75info.dk.ps@georgfischer.comwww.gfps.com/dk

FinlandGeorg Fischer AB01510 VantaaPhone +358 (0) 9 586 58 25 Fax +358 (0) 9 586 58 29info.fi.ps@georgfischer.comwww.gfps.com/fi

FranceGeorg Fischer SAS95932 Roissy Charles de Gaulle CedexPhone +33 (0) 1 41 84 68 84fr.ps@georgfischer.comwww.gfps.com/fr

GermanyGeorg Fischer GmbH73095 Albershausen Phone +49 (0) 7161 302 0info.de.ps@georgfischer.comwww.gfps.com/de

IndiaGeorg Fischer Piping Systems Pvt. Ltd400 083 MumbaiPhone +91 22 4007 2000 Fax +91 22 4007 2020branchoffice@georgfischer.comwww.gfps.com/in

IndonesiaPT Georg Fischer Indonesia Karawang 41371, Jawa BaratPhone +62 267 432 044Fax +62 267 431 857indonesia.ps@georgfischer.comwww.gfps.com/id

ItalyGeorg Fischer S.p.A.20864 Agrate Brianza (MB)Phone +39 02 921 86 1Fax +39 02 921 86 24 7 it.ps@georgfischer.comwww.gfps.com/it

JapanGeorg Fischer Ltd530-0003 Osaka Phone +81 (0) 6 6341 2451jp.ps@georgfischer.comwww.gfps.com/jp

KoreaGeorg Fischer Korea Co. LtdUnit 2501, U-Tower120 Heungdeok Jungang-ro (Yeongdeok-dong) Giheung-gu, Yongin-si, Gyeonggi-do Phone +82 31 8017 1450Fax +82 31 217 1454kor.ps@georgfischer.comwww.gfps.com/kr

MalaysiaGeorge Fischer (M) Sdn. Bhd.41200 Klang, Selangor Darul EhsanPhone +60 (0) 3 3122 5585Fax +60 (0) 3 3122 5575my.ps@georgfischer.comwww.gfps.com/my

Mexico / Northern Latin AmericaGeorg Fischer S.A. de C.V.CP 66603 Apodaca, Nuevo León / MexicoPhone +52 (81) 1340 8586Fax +52 (81) 1522 8906mx.ps@georgfischer.comwww.gfps.com/mx

Middle EastGeorg Fischer Piping Systems (Switzerland) LtdDubai / United Arab EmiratesPhone +971 4 289 49 60gcc.ps@georgfischer.comwww.gfps.com/int

NetherlandsGeorg Fischer N.V.8161 PA EpePhone +31 (0) 578 678 222 nl.ps@georgfischer.comwww.gfps.com/nl

New ZealandGeorg Fischer Ltd5018 Upper HuttPhone +04 527 9813Fax +04 527 9834nz.ps@georgfischer.comwww.gfps.com/nz

NorwayGeorg Fischer AS1351 Rud Phone +47 67 18 29 00no.ps@georgfischer.comwww.gfps.com/no

PhilippinesGeorge Fischer Pte. Ltd.Philippines Representative Office1500 San Juan CityPhone +632 571 2365Fax +632 571 2368sgp.ps@georgfischer.comwww.gfps.com/sg

PolandGeorg Fischer Sp. z o.o.05-090 Sekocin Nowy Phone +48 (0) 22 31 31 0 50 poland.ps@georgfischer.comwww.gfps.com/pl

RomaniaGeorg Fischer Piping Systems (Switzerland) Ltd020257 Bucharest - Sector 2Phone +40 (0) 21 230 53 80ro.ps@georgfischer.comwww.gfps.com/int

RussiaGeorg Fischer Piping Systems (Switzerland) LtdMoscow 125040Phone +7 495 748 11 44ru.ps@georgfischer.comwww.gfps.com/ru

SingaporeGeorge Fischer Pte Ltd528 872 SingaporePhone +65 6747 0611Fax +65 6747 0577sgp.ps@georgfischer.comwww.gfps.com/sg

Spain / PortugalGeorg Fischer S.A.28046 Madrid / SpainPhone +34 (0) 91 781 98 90es.ps@georgfischer.comwww.gfps.com/es

SwedenGeorg Fischer AB117 43 StockholmPhone +46 (0) 8 506 775 00info.se.ps@georgfischer.comwww.gfps.com/se

SwitzerlandGeorg Fischer Rohrleitungssysteme (Schweiz) AG8201 SchaffhausenPhone +41 (0) 52 631 3026ch.ps@georgfischer.comwww.gfps.com/ch

TaiwanGeorg Fischer Co. LtdSan Chung Dist., New Taipei CityPhone +886 2 8512 2822Fax +886 2 8512 2823www.gfps.com/tw

United Kingdom / IrelandGeorge Fischer Sales LimitedCoventry, CV2 2ST / United KingdomPhone +44 (0) 2476 535 535uk.ps@georgfischer.comwww.gfps.com/uk

USA / CaribbeanGeorg Fischer LLC92618 Irvine, CA / USAPhone +1 714 731 8800 Fax +1 714 731 6201us.ps@georgfischer.comwww.gfps.com/us

VietnamGeorge Fischer Pte LtdRepresentative OfficeHo Chi Minh CityPhone + 84 28 3948 4000Fax + 84 28 3948 4010sgp.ps@georgfischer.comwww.gfps.com/vn

International Georg Fischer Piping Systems (Switzerland) Ltd8201 Schaffhausen / SwitzerlandPhone +41 (0) 52 631 3003Fax +41 (0) 52 631 2893info.export@georgfischer.comwww.gfps.com/int

backcover-A4-industry_blue.indd 1backcover-A4-industry_blue.indd 1 02.06.2020 09:54:0802.06.2020 09:54:08

GFDO_BR_00045_DE (05.20)© Georg Fischer Piping Systems Ltd8201 Schaffhausen/Switzerland, 2020