bulletin 911 twin city fan & blower aug01.pdf · twin city fan & blower offers a complete...

BULLETIN 911August 2001

HIGH PRESSUREINDUSTRIAL FANSTYPE RBO, RBR, RBA & RBPCLASS 45

Twin City Fan & Blower

2 Twin City Bulletin 911

Fan housings are constructed in all usual arrangements and conform to AMCA Standard 2404-72 (Drive Arrangements for Centrifugal Fans). The fan sizes and impeller diameters conform to AMCA Standard 2402-66 (Sizes for Industrial Centrifugal Fans). AMCA does not have a standard for industrial fans des-ignating class of operation. Twin City Fan & Blower offers three basic categories, based on performance, of industrial fans. Two of the categories are shown in Bulletin 902: Class 22 – suitable for applications involving performance to approxi-mately 22" SP; and Class 32 – for performance to 32" SP.

This bulletin (Bulletin 911) shows the third category: Class 45 high pressure fans capable of reaching performance of approximately 45" SP.

RB High Pressure Industrial Fans – Class 45

HousingsAll housings are con-tinuously welded of heavy gauge steel and suitably braced to prevent pulsation.

BearingsBearings are sized and select-ed to have a minimum aver-age life of 200,000 hours based on AFMBA rating designations. The bear-ings are pillow block type, heavy-duty, anti-friction, self-aligning ball or roller type.

ShaftsShafts are AISI 1040 or 1045 hot rolled steel, accurately turned, ground, polished and ring-gauged for accuracy. Shafts are sized so that its first critical speed will be at least 1.43 times the maximum operating speed.

Factory Run TestPrior to shipment, all fans will be completely assembled and test run as a unit at operating speed or the maximum RPM allowed for the particular construction type. A written copy of this record is available upon request by the customer.

Industrial Fans for Efficiency,Dependability, and VersatilityRB industrial fans manufactured by Twin City Fan & Blower are well suited for installations involving exhaust, material conveying, pollution control, air circulation, and a variety of other industrial applications.

SIZE WHEEL ROTATABLE REVERSIBLE TYPE ARRANGEMENTS

RBO YES YES 1, 8, 9, 9F 913-919 RBA YES NO 1, 8, 9, 9F RBP YES NO 1, 9, 9F 921-923 RBO NO NO 1, 8, 9, 9F 926-941 RBR NO NO 1, 8, 9, 9F 921-941 RBA NO NO 1, 8, 9, 9F 921-926 RBP NO NO 1, 9, 9F

Twin City Fan & Blower certifies that the Series 900 type RBO/RBR/RBA fans shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

Twin City Bulletin 911 3

Wheel DesignTwin City Fan & Blower offers a complete series of indus-trial impellers to handle most industrial process and material handling applications. Each wheel is statically and dynamically balanced on electronic equipment prior to being assembled in

the fan. In addition, each unit is run at or near operating speed after assembly and the balance is fine-tuned as a complete assembly.

RBO Industrial Radial Paddle Wheel

The open type radialpaddle wheel design is

extremely rugged using heavy-

gauge steel com-ponents which are

jig assembled for accuracy and consistency. All wheels

are welded with care to insure the maximum in strength and reliability.

RBO wheels are suitable for the handling of coarse material, and

sticky, heavy, or abrasive materials.

RBR Industrial Radial Paddle WheelThe RBR wheel is similar to the RBO, with the addition of end rings. RBR con-struction is standard on size 926 and larger Class 45 fans. RBR wheels are suitable for the handling of coarse material, and sticky, heavy, or abrasive materials.

RBA Industrial Radial Air Handling WheelThe RBA wheel is a more efficient type of wheel and is used when han-dling relatively clean air, fumes, vapor exhaust, and air with a light contami-nant. The wheel is con-structed with heavy-gauge blades welded to both backplate and front ring.

RBP Industrial Radial Paper Handling WheelThis modified RBW wheel features trapezoidal gussets for the extra rugged construction necessary

when handling corrugated paper trims, fibrous material, metal trim, and other high impact loading material. A paper deflector cone over the face of the hub helps prevent wrapping of paper around

the hub or leading edge of the blades.All RBP fans are supplied with bearing stop blocks and a relieved inlet transition. The inlet

transition smooths the flow of paper trim and similar material through the fan. Breaker tabs are offered as an option on the relieved inlet transition to assist in the breakup of the material. Due to

the nature of the applications, RBP Class 45 construction in limited to 32" SP only. Use RBW per-formance tables from Bulletin 902 for RBP fans. The RBP fan is not AMCA licensed.

Please refer to Bulletin 902 for the available accessories and options for Type RBO, RBR, RBA and RBP, Class 45 fans.

Accessories


Arrangements

Arrangement 1Arrangement 1 fans are available in either direct drive (see Arrangement 8 below), or belt-drive installations. The belt-drive configuration allows the motor to be mounted in any of the four AMCA standard motor positions. The choice of a belt-drive installation provides greater performance flexibility with the use of belts and sheaves of differing sizes.

Arrangement 9FArrangement 9F (floor mount) fans are recommended when a packaged unit is desired, but required motors are too large to be mounted on the side of the bearing pedestal. In this arrangement, the base is extended to facilitate motor mounting in a horizontal position similar to an arrangement 1 fan. This arrangement is preferred over Arrangement 9 when larger horsepower motors are being employed. Maximum motor frame sizes for Arrangement 9F fans are listed in the table on page 5. Unless otherwise specified, the motor will be installed on the left (L) side of the pedestal on CW fans and on the right (R) side on CCW fans. Arrangement 9F is not designed for use with vibration isolators.

Arrangement 8Arrangement 8 fans, as illustrated in this bulletin, show a fan shaft and motor direct coupled via a flexible coupling. The integral motor sub-base is fabri-cated of heavy-gauge steel and securely reinforced for rigidity. Twin City Fan & Blower will supply a variety of wheel diameters, in differing widths, to give the greatest efficiency for any given application. If desired, an Arrangement 1 fan can be set up for direct drive. This requires a concrete motor pedestal to be built in the field.

Arrangement 9Arrangement 9 fans include a motor slide base mounted on the side of the motor ped-estal. The motor and drive can be installed at the factory or field installed. Maximum motor frame sizes for Arrangement 9 fans are listed in the table on page 5. Unless otherwise specified, the motor will be installed on the left (L) side of the ped-estal on CW fans and on the right (R) side on CCW fans.


Engineering DataTable 1. Maximum RPM, Wheel Weights and WR2 (Moment of Inertia)

Table 2. Material Specifications

Table 3. Approximate Shipping Weights (Lb) Table 4. Maximum Motor Frame Size

RBO/RBR RBA FAN SIZE WHEEL WEIGHT WR2

MAX. RPM WHEEL WEIGHT WR2

MAX. RPM (LB) (LB-FT2) (LB) (LB-FT2) 913 63 27.6 4000 91 46 4000 915 78 45.3 3500 138 92 3240 917 108 80.7 3092 190 163 3092 919 158 146 2777 235 250 2777 921 190 215 2510 306 398 2510 923 230 312 2292 363 567 2292 926 448 776 2032 452 900 2032 929 550 1192 1815 590 1468 1815 933 790 2222 1594 888 2866 1594 937 983 3465 1424 1100 4455 1424 941 1265 5464 1286 1592 7892 1286

HOUSING RBO/RBR WHEEL RBA WHEEL SHAFT BEARING

FAN SIZE SIDE BACK WHEEL DIAMETER CODE

SIDES

PLATES SCROLL

BLADES R RIM

PLATE CONE BLADES

(IN.) 913 7 7 7 0.25 — 0.25 7 7 23⁄16 RB 915 7 7 7 0.25 — 0.31 7 7 27⁄16 RB 917 0.25 7 0.25 0.25 — 0.31 7 0.25 211⁄16 RB 919 0.25 7 0.25 0.31 — 0.31 7 0.25 215⁄16 RB 921 0.25 7 0.25 0.31 — 0.38 7 0.25 215⁄16 RB 923 0.25 0.25 0.25 0.31 — 0.38 7 0.25 37⁄16 RB 926 0.25 0.25 0.25 0.31 0.25 0.38 7 0.25 315⁄16 SRB 929 0.25 0.25 0.25 0.31 0.25 0.38 7 0.25 315⁄16 SRB 933 0.25 0.25 0.25 0.38 0.25 0.50 7 0.25 47⁄16 SRB 937 0.25 0.25 0.25 0.38 0.25 0.50 7 0.25 415⁄16 SRB 941 0.31 0.25 0.25 0.38 0.25 0.50 7 0.31 57⁄16 SRB

NOTES:1. Bearing Codes: RB = Roller Bearing such as Dodge S2000 or SKF SYR series SRB = Split Roller Ball such as SKF SAF225 or Linkbelt PLB6800 series2. Gauges listed are for standard steel wheel; steel alloy will vary with size and class.3. Bearing selection is made on the basis of L-10 bearing life to be in no case less than 40,000 hours minimum or L-50 life of 200,000 hours.

ARRANGEMENT

SIZE 9 9F

913 286T 326T 915 286T 326T 917 326T 365T 919 365T 405T 921 365T 405T 923 365T 445T 926 405T 445T 929 405T 445T 933 405T 445T 937 405T 445T 941 405T 445T

ARRANGEMENT

SIZE 1 9 & 9F

913 584 797 915 805 1061 917 1006 1256 919 1201 1410 921 1867 2084 923 2445 2667 926 3086 3319 929 3818 4093 933 4536 4699 937 5495 5676 941 6770 7072

NOTE: Weights are less motors, drives and accessories.


High Temperature Construction

When elevated temperatures are encountered, maximum RPMs allowable as shown on page 5 must be derated accord-ing to the above table. Standard steel construction is suitable for use in gas temperatures up to 800°F. Aluminum wheels are suitable for temperatures up to 250°F only.

Derating Factors for High Temperature

High Temperature Construction Requirements TEMPERATURE TYPE OF

LUBRICATION

OTHER REQUIREMENTS AVAILABLE

(°F) BEARING ARRANGEMENTS

–20°F To

Arr. 1, 8, 9 & 9F +300°F

Ball or Roller Grease Standard Fan Shaft Cooler, Shaft Seal. 300°F To Ball or Roller High Temperature Expansion and Arr. 1, 8, 9 & 9F 500°F Grease Non-Expansion Bearings High Temperature Aluminum Paint

500°F To Ball or Roller

High Temperature Shaft Cooler, Shaft Seal. Expansion Arr. 1, 8, 9 & 9F

800°F

Grease

and Non-Expansion Bearings. 800°F To High Temperature 1000°F

Ball or Roller Grease

Consult Factory

DERATING FACTOR TEMPERATURE (ºF) RBO, RBA, RBP 50 KSI STAINLESS 70 1.000 0.786 200 0.990 0.747 300 0.975 0.720 400 0.955 0.690 500 0.930 0.661 600 0.904 0.636 700 0.880 0.611 800 0.837 0.593 900 — 0.576 1000 — 0.550

913 Wheel Diameter: 22.625" Inlet Area: 0.87 ft2 Outlet Area: 0.93 ft2

Tip Speed (FPM): 5.92 x RPM Inlet Diameter: 13" O.D. Outlet Dimension: 111⁄4" x 129⁄16"

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 2790 3000 3301 25.38 3351 26.29 3399 27.18 3447 28.09 3494 29.01 3540 29.92 3586 30.86 3676 32.75 3764 34.67 3849 36.60 3348 3600 3317 29.27 3366 30.25 3414 31.24 3461 32.22 3507 33.20 3553 34.20 3599 35.23 3688 37.26 3774 39.29 3859 41.38 3942 43.48 3906 4200 3339 33.45 3387 34.54 3434 35.62 3481 36.72 3527 37.81 3572 38.89 3617 40.00 3704 42.18 3790 44.42 3874 46.68 3956 48.95 4464 4800 3369 37.85 3416 39.04 3462 40.23 3508 41.44 3553 42.64 3597 43.82 3641 45.03 3727 47.44 3812 49.9 3894 52.32 3975 54.79 5022 5400 3410 42.71 3456 43.99 3500 45.23 3544 46.49 3588 47.78 3631 49.06 3674 50.36 3758 52.95 3840 55.56 3921 58.23 4000 60.89 5580 6000 3458 47.99 3503 49.37 3547 50.74 3590 52.09 3633 53.48 3675 54.84 3716 56.19 3798 58.95 3878 61.73 3957 64.55 6138 6600 3509 53.57 3553 55.05 3597 56.56 3639 58.01 3682 59.53 3723 60.99 3764 62.47 3845 65.46 3924 68.45 4000 71.38 6696 7200 3563 59.51 3606 61.08 3649 62.68 3691 64.27 3733 65.88 3774 67.47 3815 69.09 3895 72.31 3973 75.52

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 3906 4200 3302 29.85 3351 30.88 3399 31.92 3446 32.95 3493 34.00 3539 35.05 3585 36.12 3675 38.27 3762 40.42 4464 4800 3321 33.24 3368 34.33 3414 35.42 3461 36.56 3506 37.66 3551 38.79 3596 39.94 3683 42.20 3769 44.52 3853 46.86 3935 49.20 5022 5400 3353 36.97 3398 38.12 3442 39.25 3487 40.45 3530 41.59 3574 42.80 3617 44.00 3702 46.42 3785 48.85 3867 51.34 3947 53.82 5580 6000 3397 41.10 3440 42.30 3484 43.56 3526 44.77 3568 46.00 3610 47.25 3651 48.49 3733 51.03 3813 53.57 3892 56.16 3969 58.75 6138 6600 3448 45.52 3491 46.85 3533 48.16 3574 49.45 3616 50.81 3656 52.10 3696 53.42 3775 56.08 3853 58.79 3929 61.48 6696 7200 3504 50.20 3546 51.61 3587 53.01 3627 54.39 3668 55.83 3708 57.26 3747 58.66 3824 61.48 3900 64.34 3974 67.19

RBO 913

RBA 913

MAXIMUM RPM: CLASS 45 = 4000


Underlined figures indicate maximum static efficiency.Performance shown is for installation type B & D: Free or ducted inlet, ducted outlet.Power ratings (BHP) does not include belt drive losses.Performance ratings do not include the effects of appurtenances in the airstream.




RBO 915

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 5208 4200 2860 39.81 2902 41.17 2944 42.57 2985 43.96 3025 45.33 3065 46.74 3105 48.17 3182 51.00 5952 4800 2876 44.31 2917 45.79 2957 47.24 2997 48.73 3036 50.20 3075 51.70 3114 53.23 3190 56.29 6696 5400 2903 49.25 2943 50.83 2981 52.34 3020 53.94 3057 55.46 3095 57.06 3132 58.64 3206 61.89 7440 6000 2942 54.81 2980 56.45 3017 58.06 3054 59.71 3090 61.33 3127 63.04 3162 64.66 3233 68.04 8184 6600 2986 60.69 3023 62.44 3060 64.23 3096 65.98 3131 67.71 3166 69.46 3201 71.24 8928 7200 3035 66.96 3071 68.82 3106 70.65 3141 72.51 3176 74.40 3211 76.33

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 3720 3000 2859 33.85 2902 35.05 2944 36.25 2985 37.45 3026 38.68 3066 39.91 3106 41.16 3184 43.68 3259 46.20 3334 48.83 4464 3600 2873 39.04 2915 40.34 2956 41.63 2997 42.95 3037 44.26 3077 45.60 3116 46.93 3194 49.68 3269 52.41 3342 55.17 3414 57.98 5208 4200 2892 44.62 2933 46.04 2974 47.49 3014 48.92 3054 50.39 3093 51.84 3132 53.31 3208 56.26 3282 59.22 3355 62.24 3426 65.26 5952 4800 2918 50.49 2958 52.04 2998 53.62 3038 55.25 3077 56.85 3115 58.43 3153 60.03 3228 63.27 3301 66.51 3372 69.74 3442 73.02 6696 5400 2953 56.93 2993 58.65 3031 60.30 3070 62.03 3107 63.69 3145 65.44 3182 67.16 3254 70.57 3326 74.12 3396 77.66 3464 81.18 7440 6000 2995 64.00 3034 65.84 3071 67.60 3109 69.46 3146 71.28 3182 73.08 3218 74.90 3289 78.59 3359 82.34 3427 86.07 3493 89.78 8184 6600 3039 71.44 3077 73.40 3115 75.41 3152 77.38 3188 79.32 3225 81.37 3260 83.31 3330 87.28 3398 91.24 3465 95.24 8928 7200 3085 79.29 3123 81.45 3160 83.57 3197 85.73 3233 87.85 3268 89.93 3304 92.13 3373 96.39 3440 100.63

RBA 915





RBO 917

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 6678 4200 2522 51.09 2559 52.83 2596 54.62 2632 56.39 2668 58.21 2703 59.99 2738 61.82 2806 65.45 2873 69.16 7632 4800 2535 56.79 2572 58.74 2607 60.59 2643 62.55 2677 64.41 2712 66.38 2746 68.32 2813 72.23 2878 76.15 2942 80.13 3005 84.18 8586 5400 2560 63.22 2594 65.15 2628 67.12 2662 69.13 2696 71.19 2729 73.21 2762 75.26 2827 79.41 2890 83.54 2953 87.82 3014 92.07 9540 6000 2593 70.24 2627 72.38 2659 74.40 2692 76.54 2724 78.64 2756 80.77 2788 82.95 2850 87.24 2911 91.58 2971 95.98 3031 100.52 10494 6600 2632 77.81 2665 80.09 2697 82.32 2729 84.59 2760 86.81 2791 89.07 2822 91.37 2882 95.88 2941 100.45 2999 105.05 3056 109.69 11448 7200 2675 85.83 2706 88.14 2738 90.60 2769 93.00 2800 95.44 2830 97.82 2860 100.24 2919 105.08 2977 109.97 3034 114.89 3089 119.72

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 4770 3000 2521 43.43 2559 44.98 2596 46.52 2632 48.05 2668 49.62 2704 51.24 2739 52.83 2807 56.02 2874 59.31 2940 62.68 5724 3600 2533 50.06 2570 51.73 2607 53.43 2643 55.12 2678 56.79 2713 58.49 2748 60.24 2816 63.72 2882 67.21 2947 70.79 3010 74.37 6678 4200 2550 57.24 2586 59.05 2622 60.89 2658 62.78 2693 64.64 2728 66.55 2762 68.41 2829 72.19 2894 75.97 2958 79.81 3021 83.73 7632 4800 2573 64.77 2608 66.74 2643 68.75 2678 70.81 2713 72.92 2747 74.98 2780 76.99 2846 81.14 2911 85.35 2974 89.53 3035 93.67 8586 5400 2604 73.05 2638 75.15 2672 77.30 2706 79.49 2739 81.65 2772 83.84 2805 86.08 2869 90.51 2932 95.01 2994 99.58 3055 104.20 9540 6000 2640 82.02 2674 84.35 2708 86.73 2741 89.07 2773 91.35 2805 93.67 2837 96.04 2900 100.81 2961 105.54 3021 110.33 3080 115.17 10494 6600 2679 91.58 2712 94.05 2746 96.68 2778 99.14 2811 101.76 2842 104.21 2874 106.82 2935 111.83 2995 116.91 3054 122.03 11448 7200 2719 101.59 2753 104.41 2785 107.06 2818 109.88 2849 112.51 2881 115.31 2912 118.04 2973 123.52 3033 129.07 3091 134.54

RBA 917





919 Wheel Diameter: 33" Inlet Area: 1.87 ft2 Outlet Area: 1.97 ft2


RBO 919

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 8274 4200 2264 63.32 2297 65.47 2330 67.67 2363 69.92 2395 72.14 2427 74.40 2458 76.63 2519 81.13 2579 85.71 9456 4800 2276 70.43 2308 72.72 2340 75.07 2372 77.46 2403 79.82 2434 82.22 2465 84.66 2525 89.51 2584 94.43 2641 99.32 2698 104.39 10638 5400 2298 78.35 2329 80.79 2359 83.18 2390 85.73 2420 88.22 2449 90.65 2479 93.24 2537 98.34 2595 103.63 2651 108.86 2706 114.16 11820 6000 2327 86.98 2357 89.58 2387 92.22 2416 94.80 2445 97.43 2474 100.12 2502 102.72 2558 108.08 2613 113.49 2667 118.96 2720 124.47 13002 6600 2362 96.36 2392 99.23 2420 101.90 2449 104.75 2477 107.53 2505 110.35 2533 113.22 2587 118.83 2640 124.49 2692 130.18 2743 135.91 14184 7200 2400 106.22 2429 109.25 2457 112.19 2485 115.19 2513 118.23 2540 121.19 2567 124.20 2620 130.20 2672 136.24 2723 142.32 2773 148.41

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 5910 3000 2263 53.82 2297 55.74 2330 57.63 2363 59.58 2395 61.51 2427 63.48 2459 65.51 2520 69.46 2580 73.52 2639 77.68 7092 3600 2274 62.06 2307 64.10 2340 66.20 2372 68.26 2404 70.38 2436 72.54 2467 74.67 2528 78.98 2587 83.29 2645 87.69 2702 92.18 8274 4200 2289 70.92 2322 73.23 2354 75.49 2386 77.80 2417 80.07 2448 82.38 2479 84.74 2539 89.41 2598 94.16 2655 98.87 2712 103.77 9456 4800 2309 80.19 2341 82.69 2373 85.25 2404 87.76 2435 90.32 2466 92.93 2496 95.47 2555 100.58 2613 105.75 2669 110.86 2725 116.15 10638 5400 2337 90.47 2368 93.13 2399 95.85 2429 98.50 2459 101.22 2489 103.99 2518 106.68 2575 112.11 2632 117.75 2687 123.32 2742 129.07 11820 6000 2370 101.67 2400 104.49 2430 107.37 2460 110.31 2489 113.17 2518 116.09 2547 119.07 2603 124.90 2658 130.80 2711 136.60 2764 142.61 13002 6600 2404 113.38 2434 116.49 2464 119.67 2494 122.91 2523 126.06 2551 129.12 2579 132.24 2635 138.65 2688 144.80 2741 151.15 14184 7200 2441 125.95 2470 129.21 2500 132.68 2529 136.07 2557 139.36 2586 142.87 2614 146.29 2668 152.95 2722 159.85 2774 166.61

RBA 919





RBO 921

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 10122 4200 11568 4800 2048 84.00 2077 86.68 2106 89.41 2134 92.05 2163 94.87 2191 97.60 2218 100.24 13014 5400 2065 93.52 2093 96.41 2121 99.37 2149 102.38 2176 105.30 2203 108.27 2230 111.29 2283 117.35 2334 123.27 2385 129.38 2435 135.47 14460 6000 2089 103.72 2116 106.8 2143 109.94 2170 113.14 2196 116.24 2223 119.57 2248 122.62 2299 129.04 2349 135.51 2399 142.17 2447 148.67 15906 6600 2118 114.69 2144 117.92 2171 121.38 2196 124.58 2222 128.00 2248 131.49 2273 134.86 2322 141.59 2371 148.55 2418 155.33 2465 162.32 17352 7200 2152 126.57 2177 129.97 2203 133.61 2228 137.13 2253 140.71 2277 144.16 2301 147.66 2349 154.83 2397 162.24 2443 169.46 2488 176.68

CFM OV

32" SP 33" SP 34" SP 35" SP 36" SP 37" SP 38" SP 40" SP 42" SP 44" SP 46" SP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP 7230 3000 2032 59.51 2062 61.44 2092 63.43 2122 65.47 2151 67.46 2180 69.51 2208 71.52 2264 75.67 2319 79.93 8676 3600 2037 69.89 2067 72.10 2097 74.35 2126 76.56 2155 78.81 2184 81.12 2212 83.37 2267 87.90 2321 92.50 2373 97.05 2425 101.79 10122 4200 2046 80.69 2076 83.26 2105 85.76 2134 88.31 2163 90.91 2191 93.43 2219 96.01 2273 101.03 2327 106.25 2379 111.37 2429 116.40 11568 4800 2057 91.32 2086 94.11 2116 97.10 2144 99.88 2173 102.87 2201 105.77 2228 108.58 2282 114.37 2335 120.20 2387 126.05 2437 131.76 13014 5400 2072 102.49 2100 105.46 2129 108.65 2157 111.75 2185 114.92 2212 117.99 2240 121.29 2293 127.57 2345 133.92 2396 140.32 2446 146.77 14460 6000 2093 114.61 2121 117.94 2148 121.16 2175 124.45 2202 127.80 2229 131.21 2255 134.51 2307 141.28 2359 148.30 2409 155.18 2458 162.09 15906 6600 2122 128.28 2149 131.80 2175 135.20 2201 138.67 2227 142.20 2252 145.60 2278 149.25 2328 156.36 2377 163.50 2426 170.86 2473 178.03 17352 7200 2157 143.43 2183 147.15 2208 150.73 2233 154.37 2258 158.08 2283 161.85 2307 165.46 2355 172.86 2402 180.28 2449 187.92 2495 195.57

RBA 921





923 Wheel Diameter: 40" Inlet Area: 2.76 ft2 Outlet Area: 2.90 ft2


RBO 923

CFM OV


CFM OV


RBA 923





RBR 926

CFM OV


CFM OV


RBA 926







RBR 929

CFM OV


CFM OV


RBA 929





RBR 933

CFM OV


CFM OV


RBA 933







RBR 937

CFM OV


CFM OV


RBA 937





RBR 941

CFM OV


CFM OV


RBA 941





Dimensional Data – Arr. 1 & 9JP

C O.D. INLET

OUTSIDEHOUSING

KSKWYSIZE

SDDIA. SHAFT

KL

SE

HA

HC

DC

Q

WITH OPTIONALFLANGED INLET

JAHE

MOTORARR. 9ONLY

G

DISCH. CL

DIS

CH

.C L

DISCH.CL

B

A

CW THD

NH

1/2 G

C L

CLFAN HSG.

M M

K

K

L

"BH" DIA.BASE HOLES

FAN

SH

AFT

L

FAN HSG.

M M

FAN

SH

AFT

LC

LCKB

KB

AH

"BH" DIA.BASE HOLES

FAN HSG.

M M

FAN

SH

AFT

L

AH

CL

C L

KA

KB

NOTE 6

DBDONLY

"BH" DIA.BASE HOLES

NOTES:1. Clockwise (CW) rotation shown. Counterclockwise (CCW) rotation is similar but opposite.2. Sizes 913 through 919 are rotatable. Sizes 921 through 941 are non-rotatable.3. Optional flanged inlet is shown. See page 14 for dimensional data.4. Punched outlet flange is optional on sizes 913 through 919 and standard on sizes 921 through 941. See page 14 for dimensional data.5. Standard Arr. 9 motor location is on the left for CW rotation units, and on the right for CCW rotation units (unless otherwise specified).6. Use dimension KB in place of KA for DBD. 7. Dimensions vary slightly for DBD. Contact factory for dimensions.

HG

HE

HP HB

HB

HD

DA

DG

HH

HH

HF

HC HG

HB HF HA HE

HG

CW DBD

CWTAU CW UBD

CW BAU CW BHD

DB

HA

HD

DD

DF

DE

CW TAD

SIZES 913 – 919 SIZES 913 – 919 SIZES 921 – 941 (ALL DISCHARGES EXCEPT DBD) (DBD ONLY) (ALL DISCHARGES)

DIMENSIONS ARE NOT TO BE USED FOR CONSTRUCTION. CERTIFIED DRAWINGS AVAILABLE UPON REQUEST.

CW THD

SIZE

DA / DB / DC DD DE DF DG G

A AH B BH C

ARR. 1 ARR. 9 ARR. 1 ARR. 9 ARR. 1 ARR. 9 ARR. 1 ARR. 9 ARR. 1 ARR. 9

913 12.56 10.00 11.25 0.69 13.00 21.75 36.00 21.75 36.00 21.75 36.00 21.75 36.00 21.75 36.00 23.25 915 14.44 11.94 12.94 0.81 15.00 25.25 41.00 25.25 41.00 25.25 41.00 25.25 41.00 25.25 41.00 26.25 917 16.50 13.38 14.75 0.94 17.00 28.25 41.25 28.25 41.25 28.25 41.25 28.25 41.25 28.25 41.25 29.50 919 18.31 15.38 16.38 0.94 19.00 31.25 41.25 31.25 41.25 31.25 41.25 31.25 41.25 31.25 41.25 31.25

921 20.25 15.88 18.06 0.94 21.00 34.50 41.25 34.50 41.25 34.50 41.25 34.50 41.25 34.50 41.25 37.25 923 22.13 17.38 19.75 0.94 23.00 37.50 41.25 37.50 41.25 37.50 41.25 37.50 41.25 37.50 41.25 40.25 926 24.94 19.44 22.25 0.94 26.00 41.75 41.75 41.75 41.75 41.75 41.75 41.75 41.75 41.75 41.75 44.75 929 27.81 21.63 24.75 0.94 29.00 46.50 46.50 46.50 46.50 46.50 46.50 46.50 46.50 46.50 46.50 49.75

933 31.63 25.94 28.13 0.94 33.00 43.00 43.00 45.00 45.00 47.00 47.00 49.50 49.50 52.50 52.50 54.00 937 35.31 28.81 31.50 1.06 37.00 47.88 47.88 50.50 50.50 53.00 53.00 55.75 55.75 58.50 58.50 60.00 941 39.06 32.69 34.94 1.06 41.00 52.75 52.75 55.25 55.25 58.25 58.25 61.00 61.00 64.25 64.25 65.50

SIZE

H HA HB HC HD HE HF HG HH HP J JA K KA KB

ARR. 1 ARR. 9

913 31.38 ∆ 46.00 ∆ 15.88 26.13 21.00 18.69 17.88 17.06 16.25 15.44 21.50 7.81 9.31 6.94 — 6.75 915 38.31 ∆ 54.19 ∆ 18.25 29.88 23.94 21.50 20.56 19.63 18.69 17.75 24.94 9.19 10.19 8.06 — 7.88 917 42.13 ∆ 56.00 ∆ 20.63 33.69 27.00 24.44 23.38 22.31 21.25 20.19 28.00 10.06 11.06 8.94 — 8.75 919 46.25 ∆ 57.63 ∆ 22.94 37.75 30.38 27.19 26.00 24.81 23.63 22.44 30.88 10.88 11.88 9.75 — 9.56

921 49.75 60.13 23.50 40.25 33.38 30.00 28.63 27.25 25.88 24.50 34.38 12.25 13.25 — 10.88 10.69 923 53.00 61.88 26.50 44.50 36.38 32.88 31.31 29.81 28.25 26.75 37.38 13.13 14.13 — 11.75 11.50 926 56.50 64.38 29.00 49.69 41.19 37.00 35.31 33.63 31.94 30.25 41.69 14.38 15.38 — 13.00 12.75 929 60.00 66.88 31.75 54.94 45.88 41.44 39.56 37.63 35.75 33.81 46.38 15.63 16.63 — 14.25 14.00

933 71.75 71.75 36.50 62.50 51.81 47.13 44.94 42.75 40.56 38.38 53.31 18.31 19.31 — 16.44 16.19 937 75.13 75.13 40.75 69.63 57.69 52.75 50.31 47.88 45.44 43.00 59.19 20.00 21.00 — 18.13 17.88 941 80.56 80.56 48.50 79.25 63.56 58.38 55.69 53.00 50.31 47.63 66.06 22.75 23.75 — 20.38 20.13

SIZE

L

P

MAX. MOTOR

KL KS ARR. 1 ARR. 9 M N ARR. 1 ARR. 9

Q SD SE FRAME SIZE – ARR. 9

913 6.63 0.50 x 0.25 15.50 30.13 10.63 0.88 30.94 ∆ 45.56 ∆ 13.25 2.187 7.38 286T 915 8.00 0.63 x 0.31 19.69 ∆ 35.56 ∆ 11.88 1.13 38.13 ∆ 54.00 ∆ 15.25 2.437 9.00 286T 917 8.00 0.63 x 0.31 21.75 35.63 13.50 1.13 41.06 ∆ 54.94 ∆ 17.25 2.687 9.00 326T 919 8.00 0.75 x 0.38 24.25 35.63 14.38 1.13 44.50 ∆ 55.88 ∆ 19.25 2.937 9.13 365T

921 8.00 0.75 x 0.38 25.19 35.56 17.13 1.38 46.63 57.00 21.25 2.937 9.13 365T 923 8.00 0.88 x 0.44 26.75 35.63 18.63 1.38 49.13 58.00 23.31 3.437 9.25 365T 926 8.00 1.00 x 0.50 27.75 35.63 20.88 1.38 51.50 59.38 26.25 3.937 9.38 405T 929 8.00 1.00 x 0.50 28.75 35.63 23.38 1.38 53.75 60.63 29.50 3.937 9.38 405T

933 8.00 1.00 x 0.50 35.13 35.13 25.50 1.88 62.81 62.81 33.50 4.437 9.38 405T 937 8.00 1.25 x 0.63 35.13 35.13 28.50 1.88 64.63 64.63 37.56 4.937 9.50 405T 941 8.00 1.25 x 0.63 35.06 35.06 31.00 2.38 67.31 67.31 41.56 5.437 9.50 405T


Dimensional Data – Arr. 9F

SIZE HB HC HD HE HF HG HH HP J JA K KA KB KL KS

913 26.13 21.00 18.69 17.88 17.06 16.25 15.44 21.50 7.81 9.31 6.94 — 6.75 6.00 0.50 x 0.25

915 29.88 23.94 21.50 20.56 19.63 18.69 17.75 24.94 9.19 10.19 8.06 — 7.88 6.00 0.63 x 0.31 917 33.69 27.00 24.44 23.38 22.31 21.25 20.19 28.00 10.06 11.06 8.94 — 8.75 6.63 0.63 x 0.31 919 37.75 30.38 27.19 26.00 24.81 23.63 22.44 30.88 10.88 11.88 9.75 — 9.56 8.00 0.75 x 0.38

921 40.25 33.38 30.00 28.63 27.25 25.88 24.50 34.38 12.25 13.25 — 10.88 10.69 8.00 0.75 x 0.38 923 44.50 36.38 32.88 31.31 29.81 28.25 26.75 37.38 13.13 14.13 — 11.75 11.50 9.25 0.88 x 0.44 926 49.69 41.19 37.00 35.31 33.63 31.94 30.25 41.69 14.38 15.38 — 13.00 12.75 9.25 1.00 x 0.50 929 54.94 45.88 41.44 39.56 37.63 35.75 33.81 46.38 15.63 16.63 — 14.25 14.00 9.25 1.00 x 0.50

933 62.50 51.81 47.13 44.94 42.75 40.56 38.38 53.31 18.31 19.31 — 16.44 16.19 9.25 1.00 x 0.50 937 69.63 57.69 52.75 50.31 47.88 45.44 43.00 59.19 20.00 21.00 — 18.13 17.88 9.25 1.25 x 0.63 941 79.25 63.56 58.38 55.69 53.00 50.31 47.63 66.06 22.75 23.75 — 20.38 20.13 9.25 1.25 x 0.63

J

B

CDIS

CH

.

O.D. INLET

OUTSIDEHOUSING

KSKWYSIZE

SDDIA. SHAFT

KL

SE

HN

HA

HC

WITH OPTIONALFLANGED INLET

JA

LC

DIS

CH

.

LC

HE

1/2 GG

NOTE 4

Q

P

V

A

DC

CW THD

C LC L

CLFAN HSG.

M M

K

K

FAN

SH

AFT

MO

TOR

LT

S

"BH" DIA.BASE HOLES

L

FAN HSG.

M M

FAN

SH

AFT

LC

LC

LC

KB

KB

S AH

T

"BH" DIA.BASE HOLES

MO

TOR

FAN HSG.

M M

FAN

SH

AFT

MO

TOR

LCLC

LC

KB

KA

S

L T

AH

DBDONLY

NOTE 6

"BH" DIA.BASE HOLES

NOTES:1. Clockwise (CW) rotation shown. Counterclockwise (CCW) rotation is similar but opposite.2. Sizes 913 through 919 are rotatable. Sizes 921 through 941 are non-rotatable.3. Optional flanged inlet is shown. See page 14 for dimensional data.4. Punched outlet flange is optional on sizes 913 through 919 and standard on sizes 921 through 941. See page 14 for dimensional data.5. Standard Arr. 9F motor location is on the left for CW rotation units, and on the right for CCW rotation units (unless otherwise specified).6. Use dimension KB in place of KA for DBD.

HG

HE

HP HB

HB

HD

DA

DG

HH

HH

HF

HC HG

HB HF HA HE

HG

CW DBD

CWTAU CW UBD

CW BAU CW BHD

DB

HA

HD

DD

DF

DE

CW TAD

SIZES 913 – 919 SIZES 913 – 919 SIZES 921 – 941 (ALL DISCHARGES EXCEPT DBD) (DBD ONLY) (ALL DISCHARGES)


CW THD

SIZE A AH B BH C DA DB DC DD DE DF DG G H HA

DBD OTHERS

913 12.56 10.00 11.25 0.69 13.00 21.75 21.75 21.75 21.75 21.75 21.75 21.75 23.25 42.69 43.06 15.88 915 14.44 11.94 12.94 0.81 15.00 25.25 25.25 25.25 25.25 25.25 25.25 25.25 26.25 45.44 45.81 18.25 917 16.50 13.38 14.75 0.94 17.00 28.25 28.25 28.25 28.25 28.25 28.25 28.25 29.50 48.69 49.06 20.63 919 18.31 15.38 16.38 0.94 19.00 31.25 31.25 31.25 31.25 31.25 31.25 31.25 31.25 57.56 57.94 22.94

921 20.25 15.88 18.06 0.94 21.00 34.50 34.50 34.50 34.50 34.50 34.50 34.50 37.25 60.63 60.63 23.50 923 22.13 17.38 19.75 0.94 23.00 37.50 37.50 37.50 37.50 37.50 37.50 37.50 40.25 67.94 67.94 26.50 926 24.94 19.44 22.25 0.94 26.00 41.75 41.75 41.75 41.75 41.75 41.75 41.75 44.75 70.44 70.44 29.00 929 27.81 21.63 24.75 0.94 29.00 46.50 46.50 46.50 46.50 46.50 46.50 46.50 49.75 72.94 72.94 31.75

933 31.63 25.94 28.13 0.94 33.00 43.00 43.00 43.00 45.00 47.00 49.50 52.50 54.00 78.31 78.31 36.50 937 35.31 28.81 31.50 1.06 37.00 47.88 47.88 47.88 50.50 53.00 55.75 58.50 60.00 81.69 81.69 40.75 941 39.06 32.69 34.94 1.06 41.00 52.75 52.75 52.75 55.25 58.25 61.00 64.25 65.50 90.56 90.56 48.50

SIZE

L M N P Q S SD SE T V MAX. MOTOR DBD OTHERS DBD OTHERS DBD OTHERS DBD OTHERS FRAME SIZE

913 25.75 25.75 10.63 0.88 40.38 40.56 13.25 33.06 34.75 2.19 6.75 23.50 45.06 46.75 326T 915 25.75 25.75 11.88 1.13 41.75 41.94 15.25 33.31 35.00 2.44 6.75 23.25 46.56 48.25 326T 917 27.25 27.38 13.50 1.13 45.00 45.38 17.25 33.31 39.13 2.69 7.63 24.88 48.19 54.00 365T 919 34.38 34.50 14.38 1.13 54.44 54.75 19.25 37.44 44.25 2.94 9.13 32.00 53.19 60.00 405T

921 34.50 34.50 17.13 1.38 55.94 55.94 21.25 44.50 44.50 2.94 9.13 31.75 63.00 63.00 405T 923 40.13 40.13 18.63 1.38 63.75 63.75 23.31 48.00 48.00 3.44 10.50 37.38 68.00 68.00 445T 926 40.13 40.13 20.88 1.38 65.13 65.13 26.25 48.00 48.00 3.94 10.63 37.38 70.25 70.25 445T 929 40.13 40.13 23.38 1.38 66.38 66.38 29.50 48.00 48.00 3.94 10.63 37.38 72.75 72.75 445T

933 40.13 40.13 25.50 1.88 69.06 69.06 33.50 48.00 48.00 4.44 10.63 36.88 74.88 74.88 445T 937 40.13 40.13 28.50 1.88 70.88 70.88 37.56 48.00 48.00 4.94 10.75 36.88 77.88 77.88 445T 941 43.50 43.50 31.00 2.38 77.00 77.00 41.56 48.25 48.25 5.44 10.75 39.75 80.63 80.63 445T


Dimensional Data – Flanges & Inlet Boxes

AC

E

E

C D D

(N) "M" DIA.HOLES

C

B

AC

C

J

"K" SP@ "L"

J

F "G" SP@ "H" F C

(N) "M" DIA.HOLES

B

SIZE A B C D E F G H J K L M N ANGLE

SIZE 913 14.25 15.56 0.63 6.50 7.16 — — — — — — 0.44 8 1.50 x 1.50 915 15.94 17.44 0.63 7.34 8.09 — — — — — — 0.44 8 1.50 x 1.50 917 17.75 19.50 0.63 8.25 9.13 — — — — — — 0.44 8 1.50 x 1.50 919 20.38 22.31 0.88 — — 6.25 1 6.13 6.72 1 7.13 0.56 12 2.00 x 2.00 921 22.06 24.25 0.88 — — 6.78 1 6.75 7.50 1 7.50 0.56 12 2.00 x 2.00 923 23.75 26.13 0.88 — — 7.31 1 7.38 8.13 1 8.13 0.56 12 2.00 x 2.00 926 27.25 29.94 1.13 — — 8.31 1 8.38 6.91 2 6.94 0.56 14 2.50 x 2.50 929 29.75 32.81 1.13 — — 9.13 1 9.25 7.66 2 7.63 0.56 14 2.50 x 2.50 933 33.13 36.63 1.13 — — 7.69 2 7.75 8.63 2 8.56 0.56 16 2.50 x 2.50 937 36.50 40.13 1.13 — — 8.56 2 8.56 9.53 2 9.50 0.56 16 2.50 x 2.50 941 39.94 44.06 1.13 — — 9.34 2 9.50 11.16 2 9.75 0.56 16 2.50 x 2.50

SIZES 913 – 917 SIZES 919 – 941

C

B

A

(D) "E" DIA. HOLESEQUALLY SPACED

O.D.

B.C.

I.D.

SIZE A B C D E

913 13.13 14.81 16.06 12 0.44 915 15.13 16.81 18.06 12 0.44 917 17.13 18.81 20.19 12 0.44 919 19.13 20.81 22.19 12 0.44 921 21.13 22.81 24.19 16 0.56 923 23.13 24.81 26.19 16 0.56 926 26.13 28.50 30.13 16 0.56 929 29.13 31.50 33.13 16 0.56 933 33.13 35.50 37.13 24 0.56 937 37.13 39.50 41.13 24 0.56 941 41.13 43.50 45.13 32 0.56

Inlet Flange

Outlet Flange


Inlet Box – Typical

B A

F

D

C

E

INLET SIZE A B C D E AREA F (FT2) 913 23.50 7.75 2.19 11.00 15.00 1.26 1.5 x 1.5 915 27.00 8.75 2.69 12.00 16.00 1.64 1.5 x 1.5 917 30.38 9.88 2.75 13.00 17.00 2.08 1.5 x 1.5 919 34.13 11.13 2.75 14.00 18.00 2.64 2.0 x 2.0 921 37.75 12.25 3.25 15.00 19.00 3.21 2.0 x 2.0 923 41.38 13.38 3.25 16.00 20.00 3.84 2.0 x 2.0 926 46.50 15.13 3.25 17.50 21.50 4.89 2.5 x 2.5 929 52.00 16.88 3.25 19.00 23.00 6.10 2.5 x 2.5 933 59.00 19.13 4.25 21.00 25.00 7.84 2.5 x 2.5 937 66.50 21.50 4.25 23.00 27.00 9.93 2.5 x 2.5 941 73.50 23.88 5.31 25.00 29.00 12.19 2.5 x 2.5


Fans shall be Type RBO/RBR/RBA/RBP Industrial Fans, as manufactured by Twin City Fan & Blower, Minneapolis, Minnesota.

PERFORMANCE — Fans shall be tested in accordance with AMCA 211 test code for air moving devices and shall be guaranteed by the manufacturer to deliver rated published performance levels.

All RBO, RBR and RBA fans shall be licensed to bear the AMCA certified ratings seal for air.

HOUSING — Housings shall be continuously welded heavy gauge steel, suitably braced to prevent pulsation. Housings with lock seams or partially welded construction are not acceptable. Class 45 housings shall be constructed of a minimum 7 gauge through 0.31" steel. Units having wheel diameters of 33" (size 919) and smaller shall be built with adjustable discharge housings which can be field rotated to any of the eight standard positions. Fans with wheel diameters larger than 33" shall be built with a fixed discharge housing and have a flanged type discharge to provide unit rigidity.

WHEEL — All Class 45 fan wheels shall be constructed of a minimum 7 gauge through 0.75" steel. The spider hubs for RBO wheels shall be fabricated steel or cast steel material. All industrial fan wheels shall be continuously welded.

SHAFT — Shafts shall be AISI 1040 or 1045 hot rolled steel, accurately turned, ground, polished, and ring gauged for accuracy. Shafts shall be sized for the first critical speed of at least 1.43 times the maximum speed.

BEARINGS — Bearings shall be heavy duty, grease lubricated, anti-friction ball or roller, self-aligning, pillow block type and selected for a minimum average bearing life (AFBMA L-50) in excess of 200,000 hours at the maximum fan RPM.

V-BELT DRIVE — Fan and motor sheaves shall be cast iron fixed pitched drives for service over 10 HP. Small drives may use vari-able pitch cast iron motor sheaves. The minimum belt service factor is 120% for drives through 25 HP and 150% over 25 HP.

FINISH AND COATING — The entire fan assembly, excluding the shaft, shall be thoroughly degreased and deburred before application of a rust-preventative primer. After the fan is completely assembled, a finish coat of paint shall be applied to the entire assembly. The fan shaft shall be coated with a petroleum-based rust protectant. Aluminum components shall be unpainted.

ACCESSORIES — When specified, accessories such as inlet vanes, outlet dampers, companion inlet and outlet flanges, inlet bells, inlet boxes, shaft guards, and wheel and scroll liners shall be provided by Twin City Fan & Blower to maintain one source responsibility.

FACTORY RUN TEST — All fans prior to shipment shall be completely assembled and test run as a unit at the specified operat-ing speed or maximum RPM allowed for the particular construction type. Each wheel shall be statically and dynamically balanced in accordance with ANSI/AMCA 204-96 “Balance Quality and Vibration Levels for Fans” to Fan Application Category BV-3, Balance Quality Grade G6.3. Balance readings shall be taken by electronic type equipment in the axial, vertical, and horizontal directions on each of the bearings. Records shall be maintained and a written copy shall be available upon request.

GUARANTEE — The manufacturer shall guarantee the workmanship and materials for its fans for at least one (1) year from startup or eighteen (18) months from shipment, whichever occurs first.

Typical Specifications

bulletin 911 twin city fan & blower aug01.pdf · twin city fan & blower offers a complete...

Documents