bulletin 2003-06 - employment and training … · web view(ultrasound, thermography, lubrication,...
TRANSCRIPT
BULLETIN 2017-16a May 7, 2023U.S. Department of LaborEmployment and Training AdministrationOffice of Apprenticeship (OA)Washington, D.C. 20210
Distribution:
A-541 HeadquartersA-544 All Field TechA-547 SD+RD+SAA+; Lab.Com
INCLUDEPICTURE "cid:[email protected]" \* MERGEFORMATINET INCLUDEPICTURE "cid:[email protected]" \* MERGEFORMATINET INCLUDEPICTURE "cid:[email protected]" \* MERGEFORMATINET INCLUDEPICTURE "cid:[email protected]" \* MERGEFORMATINET
Subject: Revised National Guidelines for Apprenticeship Standards for the General Motors LLC Corporation United Automobile, Aerospace and Agricultural Implement Workers of America (UAW)
Code: 400.1
Symbols: DPQSP/RCG Action: Immediate
PURPOSE: To inform the staff of OA and the State Apprenticeship Agencies (SAA), Registered Apprenticeship program sponsors and other Registered Apprenticeship partners of the approval of revised National Guidelines for Apprenticeship Standards for the General Motors LLC Corporation (GM) and United Automobile, Aerospace and Agricultural Implement Workers of America, UAW.
BACKGROUND: These revised National Guidelines for Apprenticeship Standards, submitted by Mr. Steve Long, UAW General Motors Department Coordinator, Skilled Trades, on behalf General Motors LLC Corporation (GM) and United Automobile, Aerospace and Agricultural Implement Workers of America (UAW), were approved by the OA Administrator on January 6, 2017. These revised National Guidelines for Apprenticeship Standards are a model for developing local apprenticeship programs registered with the OA or a SAA for all the occupations listed in these revised National Guidelines for Apprenticeship Standards.
ACTION: The OA staff should familiarize themselves with this bulletin. A copy of the revised Work Process Schedules and Related Instruction Outlines are attached.
If you have any questions, please contact Russell Davis, Michigan State Director, at (517) 377-1747, or Ricky Godbolt, Apprenticeship and Training Representative, at (202) 693-3815.
NOTE: This bulletin is being sent via electronic mail.
Attachments
