built-in series stainless flush inset installation

D E S I G N G U I D E

B U I L T- I N S E R I E SS T A I N L E S S F L U S H I N S E T I N S T A L L A T I O N

E F F E C T I V E 1 / 9 / 2 0 1 7

Features and specifications are subject to change at any time without notice. Visit subzerowolf.com.au for the most up-to-date information.

BUILT-IN REFRIGERATION

Built-In Refrigeration

Sub-Zero designers and engineers continue to perfect the built-in line. The addition of LED lighting throughout and several new models with internal water dispensers, along with the same advanced food preservation technology Sub-Zero is known for, make the built-in line nothing short of revolutionary.

BUILT-IN MODELS

ICBBI-36R ICBBI-36F ICBBI-36UID ICBBI-36UFDID

ICBBI-36S ICBBI-42S ICBBI-42SD ICBBI-48S ICBBI-48SID ICBBI-48SD

ICBBI-42UFDID

subzero-wolf.com.au

Built-In Refrigeration 3


914 mm

2134mm

610 mm

102 mm

1873mm

606mm

946mm

432mm

606 mm

60 mm

HEIGHT DIMENSIONS ± 13 mm

MODELS ICBBI-36R AND ICBBI-36F

Interior Capacity R (L) F (L)ALL REFRIGERATOR / ALL FREEZER MODELS ICBBI-36R 662

ICBBI-36F 640OVER-AND-UNDER MODELS ICBBI-30U 362 116 ICBBI-36U 451 149 SIDE-BY-SIDE MODELS ICBBI-36S 346 227 ICBBI-42S 455 227 ICBBI-42SD 453 230 ICBBI-48S 533 270 ICBBI-48SD 531 274

Shipping Weight kgALL REFRIGERATOR / ALL FREEZER MODELS ICBBI-36R 191 ICBBI-36F 184OVER-AND-UNDER MODELS ICBBI-30U 210 ICBBI-36U 234 SIDE-BY-SIDE MODELS ICBBI-36S 244 ICBBI-42S 264 ICBBI-42SD 276 ICBBI-48S 286 ICBBI-48SD 298

Shipping weights and overall dimensions are based on stainless steel models. For flush inset applications, add 13 mm to door clearance dimensions.

All Refrigerator / All Freezer ModelsOVERALL DIMENSIONS

Built-In ModelsSPECIFICATIONS


762 mm

2134mm

610 mm

102 mm

1289mm

584mm

606mm

600mm 796

mm

368mm

606 mm

60 mm


MODEL ICBBI-30U

914 mm

2134mm

610 mm

102 mm

1289mm

584mm

606mm

600mm 946

mm

432mm

606 mm

60 mm


MODEL ICBBI-36UID

Over-and-Under ModelsOVERALL DIMENSIONS

subzero-wolf.com.au

Model ICBBI-36UFDID.

914 mm

2134mm

102 mm

1289mm

584mm

606mm

600mm

495mm

203mm

606 mmHEIGHT DIMENSIONS ± 13 mm

60 mm

665 mm

Overall Dimensions

OVER-AND-UNDER

Model ICBBI-42UFDID.

1067 mm

2134mm

102 mm

1289mm

584mm

606mm

565mm

229mm

606 mmHEIGHT DIMENSIONS ± 13 mm

60 mm

665 mm

600mm



Overall dimensions are based on stainless steel models. For flush inset applications, add 13 mm to door clearance dimensions.

1067 mm

2134mm

610 mm

102 mm

1873mm

606 mm

606mm

668mm

318mm

222mm

60 mm


MODELS ICBBI-42S AND ICBBI-42SD

914 mm

2134mm

610 mm

102 mm

1873mm

606mm

565mm

216mm

260mm

606 mm

60 mm


MODEL ICBBI-36S

Side-by-Side ModelsOVERALL DIMENSIONS

7


1219 mm

2134mm

610 mm

102 mm

1873mm

606 mm

606mm

762mm

356mm

248mm

60 mm


Side-by-Side ModelsOVERALL DIMENSIONS

MODELS ICBBI-48S, ICBBI-48SD & ICBBI-48SID

8


Electrical Requirements

Power Supply 220-240 V AC, 50/60 HzCircuit Breaker 10 ampReceptacle 3-prong grounding-type

Plumbing Requirements

Water Supply Line 6mm plastic lineWater Pressure 2.1–6.9 barWater line for Connection 5m

FRONT VIEW

1918 mmFROMFLOOR

178mm E

152mm

Freestanding location of power supply.

Built in. Alternative location of power & water supply depending on ease of access.

2,200 mmminimum

FROMFLOOR

1.

2.

2. Built in. Water supply besidefridge. Location of 6mmfl exible hose. Tape to wall andfl oor with pressure limitingvalve next to tap.

pressurelimiting valve

6mm flexi hose& tape to wall

& floor.

1.

2.



& floor.

1. Built in. Water supply abovefridge. Location of 6mmfl exible hose. Tape to wall andfl oor with pressure limitingvalve next to tap.



& floor.

1.

2.



& floor.

Planning InformationELECTRICAL REQUIREMENTS

International models from the factory designed without a transformer require a 220-240 V AC, 50/60 Hz electrical supply, fused at the correct rating for the unit. If required by local or national codes, the power cord can be easily replaced using the power inlet device.

Built-in models should have the electrical supply either in the cabinet above the refrigerator a MINIMUM OF 2200MM ABOVE THE FLOOR or in the cabinet alongside. If freestanding then locate the power point as per the diagram below. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.

PLUMBING REQUIREMENTS

For built-in models with an automatic ice maker, a pressure limiting valve and 5 meters of fl exible 6mm pipe with fi ttings is included in the refrigerator carton. Connect the pressure limiting valve close to the water tap, CHECKING THE WATER FLOW IS IN THE RIGHT DIRECTION. Ensure water connection is ½” BSP male threaded outlet. Tape the 6mm water line to the wall and fl oor to ensure it isn’t squashed when the refrigerator is pushed into the cavity. Locate the water tap either in the cabinet above a minimum of 2200mm from the fl oor, or in the cabinet alongside. The water line must not interfere with installation of the anti-tip brackets.

IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 2.1 bar to 6.9 bar supplied to the unit at all times.

9


Stainless Flush Inset ApplicationIt is necessary to consider the following points when planning for a fl ush inset application:

• The fl ush inset depth is 56 mm deeper than thestandard opening depth.

• The fl ush inset width is 46 mm wider than thestandard opening width.

• The fl ush inset height is 22 mm higher than thestandard opening height.

• You must allow a 15 mm reveal around the perimeterof the unit and grille to allow for proper door swing andairfl ow.

IMPORTANT NOTE: The fl ush inset application is not a separate model. The same model is used in a standard or fl ush inset application of stainless steel fridge.

STANDARD INSTALLATION

620 mmminimumOPENING

DEPTH

675 mmminimum

FLUSHINSETDEPTH

56 mm 32 mm

TOP VIEWTOP VIEW

FLUSH INSET INSTALLATIONWITH 19 mm PANEL


DEPTH

Standard installation. Flush inset installation.

STANDARD INSTALLATION


DEPTH

675 mmminimum

FLUSHINSETDEPTH

56 mm 23 mm

TOP VIEWTOP VIEW

STAINLESS STEELFLUSH INSET INSTALLATION


DEPTH

10

Flush Inset Opening Widths A B

902 mm 948 mm902 mm 948 mm

1054 mm 1100 mm1252 mm

DETAIL A

DETAIL B

FRONT VIEW

AWIDTH TO CLEAT

BFLUSH INSET WIDTH

23mm

23mm

SIDE VIEW

2149mm

FLUSHINSET

HEIGHT

18 mm

620 mmminimum

DEPTH TO CLEAT

675 mmminimum

FLUSH INSET DEPTH

56mm

2127mm

HEIGHTTO CLEAT

620 mmminimum

DEPTHTO CLEAT

675mmminimum

FLUSHINSETDEPTH

TOP VIEW

56 mm

23mm CLEAT

CLEAT

Detail A

Detail B

23 mm


DEPTHTO CLEAT

CLEAT

TOP VIEW675mm

minimumFLUSHINSETDEPTH

56 mm

620 mmminimumOPENINGDEPTH TO

CLEAT

23 mm

56 mm

CLEAT

SHADEDAREA

MUST BEFINISHED

76 mmtypical

102mm

76 mmtypical

23 mm


DEPTHTO CLEAT

CLEAT

TOP VIEW675mm


56 mm


CLEAT

23 mm

56 mm

CLEAT

SHADEDAREA

MUST BEFINISHED

76 mmtypical

102mm

76 mmtypical

Built-In ModelsFLUSH INSET INSTALLATION


ICBBI-36R, ICBBI-36F

ICBBI-36UID, ICBBI-36UFDID, ICBBI-36S

ICBBI-42UFDID, ICBBI-42S, ICBBI-42SD

1206 mmICBBI-48S, ICBBI-48SID, ICBBI-48SD

11

749 mm 795 mmICBBW-30


Dual InstallationSTAINLESS FLUSH INSET APPLICATION

Installing two built-in models side by side in a stainless fl ush inset application will require adjustments to the dimensions of your fi nished rough opening. It will also require a dual installation kit, avail able through your authorized Sub-Zero dealer.

* Dual installations without a fi ller strip can only be accom-plished using two units with opposite hinges as shownin illustration A below. The dual installations shown inillustrations B and C require a fi ller strip. Illustration Ais the only application that will accommodate the dualwide grille.

Illus. A

FILLER STRIP REQUIREDWITHOUT FILLER STRIP

WITHOUT FILLER STRIP

FILLER STRIP REQUIRED

FILLER STRIP REQUIRED FILLER STRIP REQUIRED









Illus. B Illus. C

12

Opening Widths A BTwo 762 mm Models 1518 mm 1564 mm762 mm and 914 mm Models 1670 mm 1716 mmTwo 914 mm Models 1822 mm 1868 mm

620 mmminimum

DEPTHTO CLEAT

675mm


FRONT VIEW

TOP VIEW

56 mm

AWIDTH TO CLEAT

BFLUSH INSET WIDTH

23mm

23mm

SIDE VIEW

2149mm

FLUSHINSET

HEIGHT

18 mm

620 mmminimum

DEPTH TO CLEAT

675 mmminimum

FLUSH INSET DEPTH

56mm

2127mm

HEIGHTTO CLEAT

CLEAT

DETAIL A

DETAIL B

23 mmCLEAT

Detail A

Detail B

23 mm


DEPTHTO CLEAT

CLEAT

TOP VIEW675mm


56 mm


CLEAT

23 mm

56 mm

CLEAT

SHADEDAREA

MUST BEFINISHED

76 mmtypical

102mm

76 mmtypical

23 mm


DEPTHTO CLEAT

CLEAT

TOP VIEW675mm


56 mm


CLEAT

23 mm

56 mm

CLEAT

SHADEDAREA

MUST BEFINISHED

76 mmtypical

102mm

76 mmtypical

Dual InstallationSTAINLESS FLUSH INSET INSTALLATION


Sub-Zero International Limited Warranty

FOR RESIDENTIAL USE

FULL TWO YEAR WARRANTY*

For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec-tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.

FULL FIVE YEAR SEALED SYSTEM WARRANTY

For five years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.

For more information regarding your Sub-Zero product warranty, contact your authorized Sub-Zero dealer. Warranties must comply to all country, state, city, local and or ordinance.

*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited60-day parts and labor warranty for cosmetic defects.

*Replacement water filters and air purification cartridges are not covered by the product warranty.

Sub-Zero, Sub-Zero & Design, Sub-Zero & Snowflake Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, Wolf, Wolf & Design, Wolf Gourmet, W & Design, red colored knobs, Cove, and Cove & Design, are registered trademarks and service marks of Sub-Zero Group, Inc. and its subsidiaries. All other trademarks are property of their respective owners in the United States and other countries.

S U B Z E R O - W O L F . C O M . A U

Bank House, 11 – 19 Bank Place.

Melbourne Victoria Australia 3000

Telephone 03 9600 2218

[email protected]

built-in series stainless flush inset installation

Documents