building process for wakeboard
TRANSCRIPT
Documenting your build process
By MItchell Banks
Step 1Creating The Mock-up
You need the mock-up to be 50.8 cm wide
And the leant needs to be 113
Step 2
You will need a 3 cm lift from the centre of the board
Step 3
Then you wont to start sanding it into a ovule shape but still keeping the 3 cm lift at the ends of the board.
Step 4 Last StepAt last we need to put a clear
coat on it called lacquer this will prevent water
getting into the board and water
logging it.
By Mitchell Banks