building information modelling (bim) library components ......building information modelling (bim)...

Building Information Modelling (BIM) Library Components Reference

for Development and Construction Division

of Hong Kong Housing Authority

(Version 1.0)

January 2010

Prepared by Business Information Technology Unit

Development & Construction Division

Housing Department

©Hong Kong Housing Authority

The Government of the Hong Kong Special Administrative Region

1 of 82

2 of 82

Disclaimer

The copyright of the material published in this [BIM Library Components Reference] (Material) is owned by the Hong Kong Housing Authority unless otherwise stated. Extracts or small parts or portions of the Material may be used, copied, reproduced, reprinted, modified, reviewed or translated for research or other educational purposes provided that the user shall assume the entire risk of using the Material and an acknowledgment of the Hong Kong Housing Authority as the source is expressly stated, and the Hong Kong Housing Authority and its officers, employees, representatives and agents shall in no event be held liable to any person or party for any damages (whether direct or indirect, or incidental or consequential) arising from or in connection with any use of the Material or otherwise. Neither reproduction nor translation of substantial parts or portions of the Material for educational purposes, nor use of the Material for purposes other than educational purposes, shall be permitted without the prior written authorization of the Hong Kong Housing Authority.

3 of 82

1. Introduction

Development and Construction Division (DCD) of Hong Kong Housing Department (HD) is responsible for • Monitoring Public Housing Construction Programme • Monitoring Housing Monitoring Information System • Commenting on territorial / district / local planning studies and planning standards and

guidelines • Reviewing and formulating strategies and policies as well as preparing and implementing

pertinent legislation with regard to construction of public housing • Formulating and implementing corporate procurement, safety and environmental management

strategies DCD is a multi-disciplinary setup with professionals from Architecture, Structural Engineering, Building Services Engineering, Civil Engineering, Geotechnical Engineering, Quantity Surveying, Landscaping, etc. With the implementation of Building Information Modelling (BIM) in DCD, electronic models would be developed and carried throughout the project lifecycle from feasibility studies, schematic design, details design, analysis, construction and maintenance. Standards and guidelines are important for effective model building, electronic file exchange, data and information compatibility, people communication, not only for in-house staff, but also for our consultants and contractors. During our development of in-house BIM Standards in year 2008, there was no standards and guidelines widely accepted as the de-facto standards in the industry in Hong Kong. It was prepared based on existing HD CAD standards which has been used, updated and proved to be workable for more than 20 years, also incorporated inputs and best practice from industry. New elements were added in developing this guideline to include additional features provided in BIM which did not exist in two-dimensional (2D) environment. The BIM Standards developed was meant to be software neutral and applicable to any BIM software. We had removed unnecessary details and retain only essential elements so that make the guideline simple to read and follow. By no mean this guideline is perfect and comprehensive. We wish this could form a basis for continuous improvement as we anticipate that the BIM technology will be changing quickly. We welcome suggestions and expert advice from in-house staff as well as industry practitioners. Suggestions, comments and other matters related to this document can be written to Mr. David Mak, Senior Manager / Business Information Technology (Construction) (email: [email protected]) of Housing Department.

mailto:[email protected]

Component Model Bathroom & Kitchen Cooking Bench & Sink

Graphic Representation Name (Family) Size (Type) Remarks

HD_CookingBench_with_sinkunit_type1_R01



4 of 82

Curtain Rack & Clothe Drying Rod


HD_bathroom_curtainrod_type1_R01



5 of 82

Laundry Rack


HD_laundry_rack_type1_R01

1690 x 390mm Material and Finishes Aluminium Tube: Aluminium Dimensions Width: 1690mm Depth: 390mm A: 700mm Identity Data Keynote: Model: Manufacturer Type Comments: URL: Description: Assembly Code: Cost: Others Movable Depth on Road Surface: 218.32mm Movable Depth: 215.00mm

6 of 82



2190 x 390mm Material and Finishes Aluminium Tube: Aluminium Dimensions Width: 2190mm Length of Left Tube: 395mm Depth: 390mm A: 700mm Identity Data Keynote: Model: Manufacturer Type Comments: URL: Description: Assembly Code: Cost: Others Movable Depth on Road Surface: 218.32mm Movable Depth: 215.00mm

7 of 82



1400 x 700mm Material and Finishes Tube: Metal - Aluminium Dimensions Length of Right Tube: 1400mm Length of Left Tube: 700mm Identity Data Keynote: Model: Manufacturer Type Comments: URL: Description: Assembly Code: Cost:

8 of 82




9 of 82




10 of 82

Shower Set


HD_showerset_type1_R01

EHC5 1/2P


EHC5 1B, 2B


EHC5 2/3P

Water Heater


HD_water_heater_R01

11 of 82

Door Accessories


HD_fixedHandle_type1_R01

Entrance Gate Pull Handle


Metal Door Pull Handle


Wooden Door Pull Handle

HD_Hasp_and_Staple_Lock_R01

HD_Leverhandle_R01

12 of 82

Lift Door


HD_liftdoor_R01 Dimensions Height: 2045mm Width: 1300 Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

13 of 82

Metal Door


HD_4SL_R01 Materials and Finishes Panel: Metal - Stainless Steel Metal Frame: Metal - Stainless Steel Dimensions Thickness: 50mm Offset to Exterior: 0mm Height: 2450mm Width: 3100mm Door Width: 765mm

14 of 82


HD_DL_Lourve _door_R01

Construction Offset to Exterior (default): 0mm Bar (default: 16mm) Materials and Finishes Metal: Metal - Stainless Steel Dimensions Height: 2150mm Width: 1300mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

15 of 82


HD_DL_R01 Materials and Finishes Metal: Metal – Stainless Steel Lock: Metal – Aluminium Dimensions Thickness: 50mm Offset to Exterior: 0mm Half Width: 775mm Height: 2850mm Width: 1550mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

16 of 82


HD_DL_with_ lower_louvre_1bracing_hinge_R01

Materials and Finishes Stainless Steel: Metal - Stainless Steel Dimensions Offset to Exterior: 0mm Half Width: 825mm Height: 2150mm Width: 1650mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

17 of 82


HD_DL_with_ lower_louvre_2bracings_hinge_R01


18 of 82


HD_DL_with_lower_louvre&side door_R01


19 of 82


HD_DL_with_sidedoor_R01

Dimensions Thickness: 50mm Offset to Exterior: 100mm Half Width: 1225mm Height: 2850mm Width: 2450mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

20 of 82


HD_DL_with_upper&lower_louvres_R01

Materials and Finishes Handle: Metal - Stainless Steel Dead Lock: Metal - Aluminium Dimensions Thickness: 60mm Offset to Exterior: 0mm Half Width: 775mm Height: 2850mm Width: 1550mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

21 of 82


HD_DL+SL_mainlobby_R01

Materials and Finishes Panel: Metal - Stainless Steel Acrylic: Acrylic Dimensions Main entrance width: 1750mm Entrance height: 2225mm Accessory entrance width:805mm Height: 3400mm Width: 4955mm Other Accessory fillet length: 590mm Main fillet length: 595mm Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

22 of 82


HD_SL_metal_grille _door_R01

Materials and Finishes Panel: Metal - Stainless Steel Metal Frame: Metal - Stainless Steel Dimensions Thickness: 45mm Side Frame Width: 22.5mm Offset to Exterior: 50mm Half Width: 422.5mm Height: 1800mm Width: 845mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

23 of 82


HD_SL_R01 Materials and Finishes Metal: Metal – Stainless Steel Lock: Metal – Aluminium Dimensions Thickness: 50mm Offset to Exterior: 0mm Half Width: 490mm Height: 2250mm Width: 980mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

24 of 82


HD_SL_with_lower_Louvres_R01

Materials and Finishes Metal: Metal - Stainless Steel Dead Lock: Metal - Aluminium Dimensions Thickness: 50mm Offset to Exterior: 100mm Height: 2100mm Width: 850mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

25 of 82


HD_SL_with_upper&lower_Louvres_R01

Materials and Finishes Handle: Metal - Stainless Steel Dead Lock: Metal - Aluminium Dimensions Thickness: 60mm Offset to Exterior: 0mm Height: 2850mm Width: 850mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

26 of 82

PVC Door


HD_SL_folding_R01

Materials and Finishes Frame: Timber – Door Frame Dimensions Height: 2150mm Width: 1040mm Door Height: 2037mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width:40mm

27 of 82

Stainless Steel Door


HD_1glazepanel_upper_louvre_R01

Materials and Finishes Stainless Steel : Stainless Steel Dimensions Height: 3345mm Width: 1100mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width:75mm

28 of 82


HD_2glazepanel_upper_louvre_R01

Construction Offset to Exterior (Default): 39.4mm Materials and Finishes Stainless Steel : Stainless Steel Glass: Stainless Steel Dimensions Height: 4250mm Width: 1600mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width:75mm

29 of 82



Construction Offset to Exterior (Default): 39.4mm Materials and Finishes Stainless Steel : Stainless Steel Glass: Stainless Steel Dimensions Height: 4250mm Width: 1600mm Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width:75mm

30 of 82



Construction Number of left Glass Slab: 2 Materials and Finishes Stainless Steel : Stainless Steel Concrete: Concrete Acrylic: Acrylic Dimensions Entrance Height: 2225mm Wall Thickness (default): 150 Main Door Width:1700mm Height: 3400mm Width: 5075mm Accessory Door Width: 850.0mm Other Accessory fillet length: 590mm Main fillet length:595mm Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width:75mm

31 of 82


HD_glazepanel_R01

Construction Number of left Glass Slab: 2 Materials and Finishes Stainless Steel : Stainless Steel Acrylic: Acrylic Dimensions Main Entrance Width: 1750mm Entrance Height: 2225mm Accessory Entrance Width: 805mm Height: 3400mm Width: 4955mm Other Accessory fillet length: 590mm Main fillet length:595mm Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width:75mm

32 of 82

Wooden Door


HD_4DL_R01 Dimensions Height: 2300mm Width: 3750mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 40mm

33 of 82


HD_DL_R01 2100 x 1370mm Materials and Finishes Handle: Metal – Aluminum Dimensions Height: 2100mm Width: 1370mm Frame Width: 1310mm Door Width: 1246mm Door Offset to Exterior: 0mm Door Level: 58mm Door Height: 1980mm Door Thickness: -50mm Bead Width: 30mm Bead Height: 30mm Bead Depth: 90mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 50mm

34 of 82


HD_DL_with_upper_glazedpanel_wiredglass_R01

Materials and Finishes Glazed Panel: Wired Glass Handle: Metal – Aluminium Frame: Timber – Door Door: Timber – Door Concrete: Concrete Bead: Timber – Door Architrave : Timber - Door Dimensions Height: 2175mm Width: 1500mm Door Width: 678mm Offset from Exterior: 0mm Door Height: 2055mm Identity Data Type Comments: WD Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width:15mm

35 of 82


HD_DL_with_upper_glazedpanel_wiredglass_lower_louvre_R01


36 of 82


HD_SL_R01 2150 x 925mm Materials and Finishes Handle: Metal – Aluminum Dimensions Height: 2150mm Width: 925mm Frame Width: 915mm Door Width: 851mm Door Offset to Exterior: 0mm Door Level: 94mm Door Height: 2019mm Door Thickness: 46.5mm Bead Width: 5mm Bead Height: 5mm Bead Depth: 90mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 45mm

37 of 82


HD_SL_with_curb_R01

Materials and Finishes Handle: Metal – Aluminum Dimensions Height: 2300mm Width: 855mm Frame Width: 795mm Door Width: 731mm Door Offset to Exterior: 0mm Door Level: 183mm Door Height: 2055mm Door Thickness: -50mm Bead Width: 30mm Bead Height: 30mm Bead Depth: 90mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 45mm

38 of 82


HD_SL_with_dbl_glazedpanel_wiredglass_R01

Material and Finishes Glazed Panel: Wired Glass Handle: Metal - Aluminium Frame: Timber - Door Door: Timber – Door Concrete: Concrete Bead: Timber – Door Dimensions Height: 2150mm Width: 910mm Frame Width: 900mm Door Width:836mm Door Offset to Exterior: 0mm Door Level: 83mm Door Height: 2030mm Door Thickness: 50mm Bead Width:5mm Bead Height:5mm Bead Depth: 98mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 15mm

39 of 82


HD_SL_with_dbl_glazedpanel_wiredglass_kicking_plate_R01

Materials and Finishes Handle: Metal – Aluminum Dimensions Height: 2120mm Width: 910mm Frame Width: 850mm Door Width: 786mm Door Offset to Exterior: 0mm Door Level: 23mm Door Height: 2035mm Door Thickness: -50mm Bead Width: 30mm Bead Height: 30mm Bead Depth: 90mm Other Frame Projection Ext.: 13mm Frame Projection Int.:13mm Frame Width: 45mm

40 of 82


HD_SL_with_upper_glazedpanel_wiredglass_lower_louvre_R01


41 of 82


HD_SL_with_upper_glazedpanel_wiredglass_R01


42 of 82

Drainage Equipment


HD_bigt_open_R01

HD_bigt_seal_R01

HD_intermediate_booster_bump_control_R01

43 of 82

Fitting


HD_bend_45deg_rks_R01

HD_bend_88deg_rks_R01

HD_junctions_88deg_rks_R01

HD_reducing_cross_junctions_88deg_rks_R01

HD_reducing_junctions_88deg_rks_R01

44 of 82

Floor Drain


HD_two_way_floor_drain_R01

HD_vertical_floor_drain_R01

45 of 82

Trap


HD_bottle_trap_R01

HD_ptrap_type1b_R01

HD_ptrap_type2a_R01

HD_wtrap_bigtype_R01

HD_wtrap_forwashingmachine_R01

46 of 82

Electrical Equipment


HD_bonding_box_R01

HD_consumer_unit_R01

HD_door_bell_push_R01

HD_door_bell_R01

HD_door_phone_R01

47 of 82


HD_lighting_switch_R01

HD_double_pole_switch_R01

HD_fused_connection_unit_R01

HD_Future_TV_FM_R01

HD_single_power_socket_R01

HD_TV_FM_point_R01

HD_twin_power_socket_R01

48 of 82

Lighting Fixture


HD_area_floodlight_R01

HD_cylindrical_downlight_R01

HD_fluorescent_lamp_double_bulkhead_ceiling_R01

HD_fluorescent_lamp_double_ceiling_R01

HD_fluorescent_lamp_single_bulkhead_R01

HD_half_spherical_downlight_R01

HD_lightbox_exit_R01

49 of 82

External


HD_metal_catladder_R01

Construction Step Number: 16 Materials and Finishes Material: Metal – Steel Dimensions Height: Identity Data Description: GMS CATLADDER Other Ring Number: 9

50 of 82

Fire Service Equipment


HD_fixed_hose_reel_R01

HD_hose_reel_nozzel_box_R01

Metal Plate


HD_FSI_type1_R01

HD_SL_fsi_type2_R01

HD_SL_hrdoor_type1_left_R01

51 of 82

Lobby


HD_grillies_door_R01

Dimensions Height: 2100mm Width: 1300 Other Frame Projection Ext.: 25mm Frame Projection Int.:25mm Frame Width: 75mm

52 of 82


HD_Letter _Box_R01

Construction Number of Floors: 5 Dimensions Letter Box Door Depth: 345mm Length: 2570mm Depth: 365mm Identity Data Keynote: Model: Manufacturer Type Comments: URL: Description: Assembly Code: Cost: Other Plywood: Plywood Concrete: Concrete

53 of 82

Refuse


HD_refuse_chute_R01

54 of 82

Town Gas Equipment


HD_gas_meter_R01

Valve


HD_gas_valve_R01

55 of 82

Water Supply Metal Plate


HD_water_meter_cupboard_type1_R01



56 of 82

Valve


HD_flush_water_valve_R01

HD_flush_water_valve_R02

HD_fresh_water_valve_R01

57 of 82

Window & Louvre Louvre


HD_AL_2panels_R01

Construction Number of Blade:20 Dimensions Rough Height: 65mm Offset from Interior: 80mm Height: 1040mm Width: 1065mm Blade Length: 1025mm Other Default Sill Height: 1390mm

58 of 82

Window – Common Area


HD_AW_1panel_with_1louvre_R01

Dimensions Height: 1640mm Width: 865mm Other Default Sill Height: 750mm

59 of 82


HD_AW_1panel_with _2louvres_R01


60 of 82


HD_AW_2panels_with_2louvres_R01


61 of 82


HD_AW_3panels_with_2louvres_R01


HD_AW_3panels_with_2louvres_aluminiumpanel_R01


62 of 82


HD_AW_8panel_R01

Dimensions Offset from Interior: 80mm Height: 1200mm Width: 7200mm 1/12 Width: 596mm Other Default Sill Height: 900mm

63 of 82

Window – Flat


HD_AW_1panel_with_grille_R01

Construction Offset to Interior (default): 60mm Materials and Finishes Metal Frame: Metal – Aluminium Glass Panel: Glass Dimensions Height: 1345mm Width: 640mm Other Default Sill Height: 955mm

64 of 82



Construction Offset to Interior (default): 30mm Materials and Finishes Metal Frame: Metal – Aluminium Glass Panel: Glass Acrylic Paint: Concrete Dimensions Height: 1545mm Width: 1300mm Other Default Sill Height: 955mm

65 of 82

Window – Precast Window



Construction Offset to Interior (default): 80mm Materials and Finishes Metal Frame: Metal – Aluminium Glass Panel: Glass Dimensions Height: 1750mm Width: 1300mm Other Default Sill Height: 750mm

66 of 82



Construction Offset to Interior (default): 80mm Materials and Finishes Metal Frame: Metal – Aluminium Glass Panel: Glass Acrylic Paint: Concrete Facade Dimensions True Width: 2080mm Height: 1750mm Width: 1300mm Other Default Sill Height: 750mm

67 of 82

Window Grille


HD_grille_type1_R01

HD_grille_type3_R01

68 of 82


HD_grille_type4_R01

HD_grille_type6_R01

69 of 82


HD_grille_type8_R01

HD_grille_type10_R01

70 of 82




71 of 82

Grouped Model Flat Type

Graphic Representation Name (Family) Remarks

HD_MF_ehc5_1-2P_R01 EHC5 1/2P Flat

72 of 82


HD_MF_ehc5_1B_R01 EHC5 1B Flat

73 of 82


HD_MF_ehc5_2-3P_R01 EHC5 2/3P Flat

74 of 82


HD_MF_ehc5_2B_R01 EHC5 2B Flat

75 of 82

Precast Façade


HD_PF_bedroom1_ehc5_1b_2b_R01

76 of 82


HD_PF_bedroom2_ehc5_2b_R01

77 of 82


HD_PF_kitchen_ehc5_1B_2b_R01

78 of 82


HD_PF_living_ehc5_1-2p_R01

79 of 82


HD_PF_living_ehc5_1b_R01

80 of 82


HD_PF_living_ehc5_2-3p_R01

81 of 82


HD_PF_living_ehc5_2b_R01

82 of 82

building information modelling (bim) library components ......building information modelling (bim)...

Documents