builder - zoeller pump company · zoellerpumps.com 800-928-86 3649 cane run road, louisville, 40211...

2
100% factory tested Features: Model 73 Builder Series Sump Pump FM2960 builder 1-year warranty Reliable integrated vertical switch 1/3 HP 115 V sump pump Performance up to 18' (5.5 m) TDH Flows up to 38 GPM (144 LPM) Rugged cast iron motor housing Engineered plastic base Corrosion-resistant, powder coated epoxy paint

Upload: vonhan

Post on 29-Sep-2018

215 views

Category:

Documents


0 download

TRANSCRIPT

zoellerpumps.com 800-928-78673649 Cane Run Road, Louisville, KY 40211 USA

100% factory tested

Features:

Model 73 Builder Series Sump Pump

FM2960

builder

• 1-year warranty

• Reliable integrated vertical switch

• 1/3 HP 115 V sump pump

• Performance up to 18' (5.5 m) TDH

• Flows up to 38 GPM (144 LPM)

• Rugged cast iron motor housing

• Engineered plastic base

• Corrosion-resistant, powder coated epoxy paint

All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electrical Code (NEC) and the Occupational Safety and Health Act (OSHA).CAUTION

© Copyright 2017 Zoeller® Co. All rights reserved.502-778-2731 | 800-928-7867 | 3649 Cane Run Road | Louisville, KY 40211-1961 | www.zoellerpumps.com

PRODUCT SPECIFICATIONS

MO

TO

RHorse Power 1/3

Voltage 115

Phase 1 Ph

Hertz 60 Hz

RPM 3450

Type Permanent split capacitor

Insulation Class B

Amps 5.5

PU

MP

Operation Automatic

Auto On/Off Points 6-1/2” (16.5 cm) / 2-1/2” (6.3 cm)

Discharge Size 1-1/2” NPT

Solids Handling 3/8” (9 mm) spherical solids

Cord Length 9’

Cord Type UL listed with 3 prong plug

Max. Head 18’ (5.5 m)

Max. Flow Rate 38 GPM (144 LPM)

Max. Operating Temp. 104 °F (40 °C)

Cooling Oil filled

Motor Protection Auto reset thermal overload

MA

TE

RIA

LS

Motor Housing Cast iron

Pump Housing Engineered plastic

Base Engineered plastic

Upper Bearing Ball bearing

Lower Bearing Ball bearing

Mechanical Seals Carbon and ceramic

Impeller Type Non-clogging vortex

Impeller Engineered plastic

Hardware Stainless steel

Motor Shaft 410 stainless steel

Gasket NBR

R

Certified to CSAStandard 227875

NOTE: See model comparison chart for specific details.

3 15/16"

5 13/32"

2 25/32" (70.6 mm)

2 11/16"

1-1/2" NPT

2 9/16" (65.1 mm)

11" (279.4 mm)

(137.3 mm)

(100 mm)

(68.3 mm)

4 1/2 (114.3 mm)

SK3021M

ETER

S

TOTA

L DY

NAM

IC H

EAD

0

2

4

6

403010 20

FLOW PER MINUTE

LITERS GALLONS

0 80

10

5

15

20

PUMP PERFORMANCE CURVEFEET

MODEL 73