buffalo forge steel doors product guide · forge steel doors® color product catalog, and have the...
TRANSCRIPT
Buffalo Forge Steel Doors® Product GuideEffective January, 2015
This catalog is © 2015 GlassCraft® Door Company, Houston, Texas. No reproduction of any design, drawing, or any other graphic image from GlassCraft Door Company is allowed without specific approval in writing from GlassCraft Door Company. Pricing and product information/specifications may change without notice.
This guide includes the following information:
• Product specifications for Buffalo Forge Steel Doors®
• Glass options
• Product section views
Contact Us1-800-766-2196 — National Toll-Free1-713-690-8282 — Local
Sales 1-713-690-2919Accounting 1-713-690-9994
E-mail: sales: [email protected] service: [email protected] accounting: [email protected]: [email protected]
Fax: 713-690-2919
Web site: www.glasscraft.com
Hours of OperationMonday through Friday
Eastern 9:00 am – 6:00 pm
Central 8:00 am – 5:00 pm
Mountain 7:00 am – 4:00 pm
Pacific 6:00 am – 3:00 pm
Order Forms and Quotation Forms are on-line at www.glasscraft.com under the “CUSTOMER SERVICE” window... then in the “SERVICE CENTER” area.
You are welcome to visit and tour our 185,000 square foot glass and door facility. Please call first, prior to your visit. Weekday hours are listed above. Should you wish to pick up your order, please call to confirm that the order is available for loading prior to your arrival.
A M DA M D ®®MEMBER
®
2002 Brittmoore Road Houston, Texas 77043-2209
2
Product Specifications for Buffalo Forge Steel Doors® SeriesAll entryways for this product line are completely assembled in steel wall bucks prior to shipment in order to ensure accurate and consise assembly. We photograph each unit prior to shipment in order to record the quality of the construction.
Doors built for the Buffalo Forge Steel Doors® Series program are included in our Buffalo Forge Steel Doors® color product catalog, and have the following specifications*:
1) Entryways are designed with a modular assembly approach, and have been designed to be similar to wood door specifications. See page 2 of the Buffalo Forge Steel Doors® color catalog for detailed features and benefits of the Buffalo Forge series.
2) Buffalo Forge products are available as pre-hung, prefinished units only.
3) Both inswing and outswing, and right and left-hand openings are available for all entry configurations.
4) Unit includes weatherstrip, composite sill, doors, frames, flush-bolts, hinges. Lockset hardware not included.
5) Door jambs are 6-5/8" or 4-5/8" in width...same price for either.
6) Five glass textures are available for Buffalo Forge doors. All are insulated glass panels (see page 2 for more information).
7) All standard stock Buffalo Forge doors are 8´ tall and, 36" wide or 42" wide.
8) A detailed installation guide and an installation video guide CD is included with each Buffalo Forge entry (photo at right). This video is also available for viewing at www.glasscraft.com.
9) Available Options• 3 Design Series — NP-Series (Narrow Profile), WP-Series (Wide Profile) and
WI-Series (Wrought Iron)
• 6 color choices — SATIN finish, in Black, French Grey and Oil Rubbed Bronze, and ANTIQUE finish, in Pale Bronze, Pewter Grey and Copper Bronze.
• 5 glass texture choices — see next page
• 4 Handle set choices — see catalog page 58 for specifications and requirements
• Custom design and production available
10) Installation instructions and an installation video are available on-line at www.glasscraft.com. It is very important to refer to these instructions so that the entry unit is installed correctly.
Available Stock Product Sizes• Single Doors: 36˝ x 96˝ x 1 1⁄2˝ or 42˝ x 96˝ x 1 1⁄2˝ • Double Doors: 72˝ x 96˝ x 1 1⁄2˝
ConstructionDoors: one-piece roll-formed 14 gauge steel doors are foam filled
Door Frames: 4 5⁄8˝ and 6 5⁄8˝ widths and include pre-drilled mounting holes located to the “inside” of Q-Lon® weatherstrip.
Hinges and JambsHinges are stainless steel with ball bearings, solid bronze bushings and stainless steel pins. Jambs are industry standard sizes.
Product ApprovalsGlass is made in accordance with safety codes. Impact rated entryways are not available in this product line. Visit our web site for windload data under the Product Approvals link.
Custom CapabilitiesCustom products are available. Please refer to our Custom Doors Product Guide for more information.
WarrantySee our warranty on our web site for this product line.
* All specifications, product designs and information listed are subject to change without prior notice. We constantly are improving our products, and these improvements may cause us to change the specifications listed.
3
Product Specifications for Buffalo Forge Steel Doors® Series
Section Views Glass Texture Options
Ice Flower Glass Privacy Rating
4 5 86 72 31 109
Clear Glass Privacy Rating
3 4 5 8761 2 109
Rain Glass Privacy Rating
4 5 876 92 31 10
Ocean Glass Privacy Rating
4 5 876 92 31 10
Reeds Glass Privacy Rating
4 5 86 72 31 109
Applies to standard Buffalo Forge Steel Doors in the Narrow Profile (NP) series.
Door Glass PanelFrame
GlassFrameHinge
PrimaryHinge
DoorJambFrame
Weatherstrip
DecorativeWroughtIron
FrameStop
IG Glass Panel
InsulatingFoam
ButylSealant
EXTERIOR
MountingScrew (notincluded)
Applies to standard Buffalo Forge Steel Doors in the Wrought Iron (WI) and Wide Profile (WP) series.
Jamb
Panel Door
Glass
GlassBead
Buffalo Forge Hinge AssemblyBuffalo Forge NP-Series Doors
Buffalo Forge WI-Series and WP-Series Doors
Hinge Assembly
Ball Bearing
Bronze Bushing
Stainless Steel Pin
Available in Bronze or Steel finish options.
4
Product Specifications for Buffalo Forge Steel Doors® Series
R381/4˝
993/4˝
Double with Transom
381/4˝
761/2˝
Double Round Top
R381/4˝
993/4˝
761/2˝
R201/8˝
Single Round Top
993/4˝
403/8˝
Single Surround Door
717/8˝
R3515/16˝
1159/16˝
• Dimensions shown with 2’’ heavy-duty no twist framing system.
• To calulate the Rough Opening add 2˝ to the width and 1˝ to the height of the unit dimensions.
Double with TransomDouble Round TopSingle Surround DoorSingle Round Top
Double Arch TopDouble DoorSingle DoorSingle Door
Buffalo Forge Unit Dimensions
761/2˝
993/4˝
Double Arch Top
R621/2˝
8611/16˝
Double Door761/2˝
993/4˝
Single Door
993/4˝
403/8˝
Single Door
993/4˝
463/8˝
5
Product Specifications for Buffalo Forge Steel Doors® Series
Jamb Size Options
All Buffalo Forge entryways shown in this catalog are pre-hung as assembled door units. We offer two jamb sizes, 4-5/8˝ wide or 6-5/8˝ wide to fit most construction needs.
The jamb includes pre-drilled mounting holes for easy installation of the door unit into all framing types. A full set of installation instructions and a how-to video are provided with each Buffalo Forge unit and are also available to download from our web site at www.glasscraft.com. If needed, you can use any standard brickmold and interior casing applications with the Buffalo Forge steel frame to fit seamlessly into your home’s construction and trim options.
If our standard frame size will not work, please call and talk to our custom order department to review custom jamb options for your project.
In-swing Configurations
Out-swing Configurations
Left Hand In-swing Right Hand In-swing Left Hand In-swing Right Hand In-swing
Left Hand Out-swing Right Hand Out-swing Left Hand Out-swing Right Hand Out-swing
All doors are viewed from exterior.
Pre-hang Configuration Options
All standard Buffalo Forge door designs are available with In-swing or Out-swing doors and can be ordered as left-handed or right-handed units. Please refer to the chart above to specify the handing when placing your order. All doors on the handing guide are viewed from the exterior of the home. Door units may also be ordered with ADA (Americans with Disabilities Act) accessible thresholds. ADA threshold units are made to order and will require extended lead times.
Buffalo Forge Handing Guide
6
Product Specifications for Buffalo Forge Steel Doors® Series
San Jose - Oil Rubbed Bronze / Black San Jose - Antique Nickel
NOTE: All Buffalo Forge Door panels are 1-1/2’’ thick. In choosing a compatible handleset, make sure that your hardware selection will fit based on these specifications: a) Door thickness - 1-1/2” b) Backset - 2-3/4” c) Grip center - 5-1/2” (grip center is the distance between the middle of the thumb latch hole and the bottom hole in the door)
d) For WI-Series, handlesets must not have a lever handle for the interior of the door e) Must be a one-point lockset f) Lock strip measurement - 12-15/16"
All Buffalo Forge doors are 1.5 inches thick and can use standard door lockset hardware specifically made to work with this door thickness. (Hardware for WI-Series should NOT have a “lever” handle on the inside, as this will not allow the glass panel to open). The doors are pre-bored with a 2-3/4 inch backset for a handleset and a dead bolt. GlassCraft will NOT pre-drill additional holes at the bottom of the lockset, unless it was purchased from and pre-drilled by GlassCraft. GlassCraft mounts a “spacer plate” behind the hardware options shown below, to fit these 1.5 inch thick doors.
The locksets shown below are standard “one-point” traditional locksets and may be used for right-hand or left-hand door swings. All necessary hardware is included. Installation into the door slab is included in the pricing of these one-point lock sets. Sizes shown below in inches. Refer to NOTE below for more guidelines in choosing the right handleset for a Buffalo Forge door.
Handleset Options
exterior interior
IH3001ORB1PTBF One-point IH3001ORBBF Dummy
IH3001AN1PTBF One-point IH3001ANBF Dummy
Savoy - Oil Rubbed Bronze / Black Savoy - Antique Nickel
Exterior Interior Exterior Interior
Savoy
San Jose - Oil Rubbed Bronze / Black San Jose - Antique Nickel
I47020CORB1PTBF One-point I47020CORBBF Dummy
With 11” x 2.5” trim plate
I47020CAN1PTBF One-point I47020CANBF Dummy
With 11” x 2.5” trim plate
Exterior
Interior Interior
Exterior
San Jose
7
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (NP-Series)
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas
NP Series Square Top Single: Buffalo Forge Series
*specifications may change without notice
8
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (NP-Series)NP Series Square Top Double : Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas
NP Series Square Top Double: Buffalo Forge Series
*specifications may change without notice
9
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (NP-Series)
© GlassCraft Door CompanyHouston, Texas
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
NP Series Arch Top Double: Buffalo Forge Series
10
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (NP-Series)
NP Series Round Top Double : Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
1.25”
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
NP Series Round Top Double: Buffalo Forge Series
11
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (WP-Series)
2”
2”
GlassCraft Door CompanyHouston, Texas USA
WP Series Square Top Single Door Entry
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
speci�cations may change without notice
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
WP Series Square Top Single: Buffalo Forge Series
12
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (WP-Series)
99 34 "
76 716 "
36"
96"
44"
Backset 2 34 "
Screw
Screw
14 "
(C200)
2"(C200)
58 "
458 "
R175 ( 34 "X1 3
4 ")
FLAT BAR 14 "X 1
2 "
PANEL DOOR(see detail A)
Screw
Screw
12
4
3
1-Panel Door2-Grill3-Glass frame4-Glass
Screw
Screw
Jamb 4 58 "
GlassCraft Door CompanyHouston, Texas USA
WP Series Square Top Double Door Entry
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
speci�cations may change without notice
2”
2”
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
99 34 "
76 716 "
36"
96"
44"
Backset 2 34 "
Screw
Screw
14 "
(C200)
2"(C200)
58 "
458 "
R175 ( 34 "X1 3
4 ")
FLAT BAR 14 "X 1
2 "
PANEL DOOR(see detail A)
Screw
Screw
12
4
3
1-Panel Door2-Grill3-Glass frame4-Glass
Screw
Screw
Jamb 4 58 "
GlassCraft Door CompanyHouston, Texas USA
WP Series Square Top Double Door Entry
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
speci�cations may change without notice
2”
2”
WP Series Square Top Double: Buffalo Forge Series
13
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (WP-Series)
GlassCraft Door CompanyHouston, Texas USA
WP Series ArchTop Double Door Entry
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
speci�cations may change without notice
2”
2”
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
WP Series Arch Top Double: Buffalo Forge Series
14
Product Specifications for Buffalo Forge Steel Doors® Series
Technical Drawings (WP-Series)
1.25”
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
NP Series Square Top Single: Bu�alo Forge Series
©GlassCraft Door CompanyHouston Texas*specifications may change without notice
WP Series Round Top Double: Buffalo Forge Series
2”
2”
GlassCraft Door CompanyHouston, Texas USA
WP Series Round Top Double Door Entry
Door jambs available in both4-5/8” and 6-5/8” widths.Door jambs used in NP Series, WP Series and WI Series are identical.
speci�cations may change without notice