bt138x-800...bt138x-800 to220f bt138x-800,127 tube 50 sot186a 14-nov-2013 type number marking codes...

BT138X-8004Q TriacRev.02 - 27 January 2021 Product data sheet

1. General descriptionPlanar passivated four quadrant triac in a TO220F "full pack" plastic package intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.

2. Features and benefits• High blocking voltage capability• High noise immunity• Isolated package• Less sensitive gate for improved noise immunity• Planar passivated for voltage ruggedness and reliability• Triggering in all four quadrants

3. Applications• General purpose motor control• General purpose switching

4. Quick reference dataTable 1. Quick reference data Symbol Parameter Conditions Min Typ Max Unit VDRM repetitive peak off-state

voltage - - 800 V

ITSM non-repetitive peak on- state current

full sine wave; Tj(init) = 25 °C; tp = 20 ms; Fig. 4; Fig. 5

- - 95 A

Tj junction temperature - - 125 °C

IT(RMS) RMS on-state current full sine wave; Th ≤ 56 °C; Fig. 1; Fig. 2; Fig. 3

- - 12 A

Static characteristics

IGT gate trigger current VD = 12 V; IT = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 7

- 5 35 mA

VD = 12 V; IT = 0.1 A; T2+ G-; Tj = 25 °C; Fig. 7

- 8 35 mA

VD = 12 V; IT = 0.1 A; T2- G-; Tj = 25 °C; Fig. 7

- 10 35 mA

VD = 12 V; IT = 0.1 A; T2- G+; Tj = 25 °C; Fig. 7

- 22 70 mA

WeEn Semiconductors BT138X-8004Q Triac

BT138X-800

Product data sheetAll information provided in this document is subject to legal disclaimers. © WeEn Semiconductors Co., Ltd. 2021. All rights reserved

27 January 2021 2 / 13

5. Pinning information

6. Ordering information

Table 2. Pinning information Pin Symbol Description Simplified outline Graphic symbol 1 T1 main terminal 1

2 T2 main terminal 2 3 G gate mb

n.c. mounting base; isolated

Table 3. Ordering information

sym051

T1G

T2

Symbol Parameter Conditions Min Typ Max UnitDynamic characteristics

dVD/dt rate of rise of off-statevoltage

VDM = 536 V; Tj = 125 °C; (VDM = 67%of VDRM); exponential waveform; gateopen circuit

100 250 - V/μs

7. MarkingTable 4. Marking codes

Type number Package name

Orderable part number Packing method

Small packing quantity

Package version

Package issue date

BT138X-800 TO220F BT138X-800,127 Tube 50 SOT186A 14-Nov-2013

Type number Marking codes BT138X-800 BT138X

800


BT138X-800


27 January 2021 3 / 13

8. Limiting valuesTable 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Conditions Min Max Unit VDRM repetitive peak off-state

voltage - 800 V

IT(RMS) RMS on-state current full sine wave; Th ≤ 56 °C; Fig. 1; Fig. 2; Fig. 3

- 12 A

ITSM non-repetitive peak on- state current

full sine wave; Tj(init) = 25 °C; tp = 20 ms; Fig. 4; Fig. 5

- 95 A

full sine wave; Tj(init) = 25 °C; tp = 16.7 ms - 105 A

I2t I2t for fusing tp = 10 ms; sine-wave pulse - 45 A2s

dIT/dt rate of rise of on-state current

IG = 70 mA; T2+ G+ - 50 A/μs

IG = 70 mA; T2+ G- - 50 A/μs

IG = 70 mA; T2- G- - 50 A/μs

IG = 140 mA; T2- G+ - 10 A/μs

IGM peak gate current - 2 A

PGM peak gate power - 5 W

PG(AV) average gate power over any 20 ms period - 0.5 W

Tstg storage temperature -40 150 °C

Tj junction temperature - 125 °C

Fig. 1. RMS on-state current as a function of heatsink temperature; maximum values

f = 50 Hz; Th = 56 °C Fig. 2. RMS on-state current as a function of surge duration; maximum values


BT138X-800


27 January 2021 4 / 13

f = 50Hz Fig. 4. Non-repetitive peak on-state current as a function of the number of sinusoidal current cycles; maximum values

α = conduction angle a = form factor = IT(RMS) / IT(AV) Fig. 3. Total power dissipation as a function of RMS on-state current; maximum values


BT138X-800


27 January 2021 5 / 13

tp ≤ 20 ms (1) dIT/dt limit (2) T2- G+ quadrant limit Fig. 5. Non-repetitive peak on-state current as a function of pulse width; maximum values


BT138X-800


27 January 2021 6 / 13

9. Thermal characteristicsTable 6. Thermal characteristics Symbol Parameter Conditions Min Typ Max Unit Rth(j-h) thermal resistance

from junction to heatsink

full or half cycle; with heatsink compound; Fig. 6

- - 4 K/W

full or half cycle; without heatsink compound; Fig. 6

- - 5.5 K/W

Rth(j-a) thermal resistance from junction to ambient

in free air - 55 - K/W

(1) Unidirectional (half cycle) without heatsink compound (2) Unidirectional (half cycle) with heatsink compound (3) Bidirectional (full cycle) without heatsink compound (4) Bidirectional (full cycle) with heatsink compound Fig. 6. Transient thermal impedance from junction to heatsink as a function of pulse duration

Symbol Parameter Conditions Min Typ Max Unit

Visol(RMS) RMS isolation voltage from all terminals to external heatsink; sinusoidal waveform; clean and dust free; 50 Hz ≤ f ≤ 60 Hz; RH ≤ 65 %; Th = 25 °C

- - 2500 V

Cisol isolation capacitance from main terminal 2 to external heatsink; f = 1 MHz; Th = 25 °C

- 10 - pF

Table 7. Isolation characteristics

10. Isolation characteristics


BT138X-800


27 January 2021 7 / 13

Symbol Parameter Conditions Min Typ Max Unit

Static characteristics

IGT gate trigger current VD = 12 V; IT = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 7

- 5 35 mA

VD = 12 V; IT = 0.1 A; T2+ G-; Tj = 25 °C; Fig. 7

- 8 35 mA

VD = 12 V; IT = 0.1 A; T2- G-; Tj = 25 °C; Fig. 7

- 10 35 mA

VD = 12 V; IT = 0.1 A; T2- G+; Tj = 25 °C; Fig. 7

- 22 70 mA

IL latching current VD = 12 V; IG = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 8

- 7 40 μA

VD = 12 V; IG= 0.1 A; T2+ G-; Tj = 25 °C; Fig. 8

- 20 60 mA

VD = 12 V; IG= 0.1 A; T2- G-; Tj = 25 °C; Fig. 8

- 8 40 mA

VD = 12 V; IG = 0.1 A; T2- G+; Tj = 25 °C; Fig. 8

- 10 60 mA

IH holding current VD = 12 V; Tj = 25 °C; Fig. 9 - 6 30 mA

VT on-state voltage IT = 15 A; Tj = 25 °C; Fig. 10 - 1.4 1.65 V

VGT gate trigger voltage VD = 12 V; IT = 0.1 A; Tj = 25 °C; Fig. 11

- 0.7 1 V

VD = 400 V; IT = 0.1 A; Tj= 125 °C 0.25 0.4 - V

ID off-state current VD = 800 V; Tj = 125 °C - 0.1 0.5 mA

Dynamic characteristics dVD/dt rate of rise of off-state

voltage VDM = 536 V; Tj = 125 °C; (VDM = 67% of VDRM); exponential waveform; gate open circuit

100 250 - V/μs

tgt gate-controlled turn-on time

ITM = 16 A; VD = 800 V; IG = 0.1 A; dIG/ dt = 5 A/μs

- 2 - μs

Table 8. Characteristics

11. Characteristics


BT138X-800


27 January 2021 8 / 13

(1) T2- G+ (2) T2- G- (3) T2+ G- (4) T2+ G+ Fig. 7. Normalized gate trigger current as a function of junction temperature

Fig. 8. Normalized latching current as a function of junction temperature

Fig. 9. Normalized holding current as a function of junction temperature

Vo = 1.145 V; Rs = 0.031 Ω (1) Tj = 125 °C; typical values (2) Tj = 125 °C; maximum values (3) Tj = 25 °C; maximum values Fig. 10. On-state current as a function of on-state voltage


BT138X-800


27 January 2021 9 / 13

Fig. 11. Normalized gate trigger voltage as a function of junction temperature


BT138X-800


27 January 2021 10 / 13

12. Package outline


BT138X-800


27 January 2021 11 / 13

13. Legal information

Data sheet status

Documentstatus [1][2]

Productstatus [3]

Definition

Objective[short] datasheet

Development This document contains data fromthe objective specification for productdevelopment.

Preliminary[short] datasheet

Qualification This document contains data from thepreliminary specification.

Product[short] datasheet

Production This document contains the productspecification.

[1 lease consult the most recently issued document before initiating orcompleting a design.

[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.ween-semi.com.

DefinitionsDraft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. WeEn Semiconductors does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.

Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local WeEnSemiconductors sales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenWeEn Semiconductors and its customer, unless WeEn Semiconductors andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the WeEn Semiconductors productis deemed to offer functions and qualities beyond those described in theProduct data sheet.

DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, WeEn Semiconductors does notgive any representations or warranties, expressed or implied, as to theaccuracy or completeness of such information and shall have no liability forthe consequences of use of such information. WeEn Semiconductors takesno responsibility for the content in this document if provided by an informationsource outside of WeEn Semiconductors.

In no event shall WeEn Semiconductors be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.

Notwithstanding any damages that customer might incur for any reasonwhatsoever, WeEn Semiconductors’ aggregate and cumulative liabilitytowards customer for the products described herein shall be limited inaccordance with the Terms and conditions of commercial sale of WeEnSemiconductors.

Right to make changes — WeEn Semiconductors reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.

Suitability for use — WeEn Semiconductors products are not designed,authorized or warranted to be suitable for use in life support, life-criticalor safety-critical systems or equipment, nor in applications where failureor malfunction of an WeEn Semiconductors product can reasonablybe expected to result in personal injury, death or severe property orenvironmental damage. WeEn Semiconductors and its suppliers accept noliability for inclusion and/or use of WeEn Semiconductors products in suchequipment or applications and therefore such inclusion and/or use is at thecustomer’s own risk.

Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. WeEn Semiconductors makesno representation or warranty that such applications will be suitable for thespecified use without further testing or modification.

Customers are responsible for the design and operation of their applicationsand products using WeEn Semiconductors products, and WeEnSemiconductors accepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the WeEn Semiconductors product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.

WeEn Semiconductors does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using WeEnSemiconductors products in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). WeEn does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.

No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.

Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.

Non-automotive qualified products — Unless this data sheet expresslystates that this specific WeEn Semiconductors product is automotivequalified, the product is not suitable for automotive use. It is neither qualifiednor tested in accordance with automotive testing or application requirements.WeEn Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications.

In the event that customer uses the product for design-in and use inautomotive applications to automotive specifications and standards,customer (a) shall use the product without WeEn Semiconductors’ warrantyof the product for such automotive applications, use and specifications, and(b) whenever customer uses the product for automotive applications beyondWeEn Semiconductors’ specifications such use shall be solely at customer’sown risk, and (c) customer fully indemnifies WeEn Semiconductors forany liability, damages or failed product claims resulting from customerdesign and use of the product for automotive applications beyond WeEnSemiconductors’ standard warranty and WeEn Semiconductors’ productspecifications.

] P


BT138X-800


27 January 2021 12 / 13

Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.

TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.


BT138X-800


27 January 2021 13 / 13

14. Contents1. General description .......................................................12. Features and benefits ...................................................13. Applications ...................................................................14. Quick reference data .....................................................15. Pinning information .......................................................26. Ordering information .....................................................27. Marking ...........................................................................28. Limiting values ..............................................................39. Thermal characteristics ................................................610. Isolation characteristics .............................................611. Characteristics .............................................................712. Package outline .........................................................1013. Legal information ...................................................... 1114. Contents .....................................................................13

© WeEn Semiconductors Co., Ltd. 2021. All rights reservedFor more information, please visit: http://www.ween-semi.comFor sales office addresses, please send an email to: [email protected] of release: 27 January 2021

1. General description2. Features and benefits3. Applications4. Quick reference data5. Pinning information6. Ordering information7. Marking8. Limiting values9. Thermal characteristics10. Isolation characteristics11. Characteristics12. Package outline13. Legal information14. Contents