bt jenus user manual v1.0 for j!3x

36
www.bowthemes.com 1 BT JENUS JOOMLA 3.X TEMPLATE Total User Guide Version 1.0 Copyright © 2014 Bowthemes.com [email protected]

Upload: curtis-holmes

Post on 01-Feb-2016

43 views

Category:

Documents


2 download

DESCRIPTION

Manual de BT Jenus para joomla 3.0

TRANSCRIPT

Page 1: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

1

BT JENUS JOOMLA 3.X TEMPLATE

Total User Guide Version 1.0

Copyright © 2014 Bowthemes.com [email protected]

Page 2: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

2

Table of Contents

INTRODUCTION ........................................................................................................................................................ 3

Template Features ................................................................................................................................................. 3

Compressed File Contents .................................................................................................................................... 3

Accompanying Extensions ................................................................................................................................... 3

HELP AND SUPPORT ................................................................................................................................................ 4

We support .............................................................................................................................................................. 4

We don’t support .................................................................................................................................................... 4

Support channel ..................................................................................................................................................... 4

We recommend ....................................................................................................................................................... 4

INSTALLING ............................................................................................................................................................... 5

1. Installing Quickstart package ....................................................................................................................... 5

2. Partial installation ........................................................................................................................................11

TEMPLATE LAYOUT ...............................................................................................................................................12

WORKING WITH TEMPLATE MODULE POSITIONS .......................................................................................17

1. BT Jenus– All module positions at a quick glance (homepage - scroll page): ..................................17

2. Module position in content page: ...............................................................................................................20

3. How to configure BT Jenus modules ..........................................................................................................21

CUSTOMIZE THE LOOK OF YOUR TEMPLATE .................................................................................................31

HOW TO CUSTOMIZE CONTENT IN K2 COMPONENT ....................................................................................32

1. Configure images size in K2 component ...................................................................................................32

2. Configure Category page ..............................................................................................................................33

HOW TO UPGRADE YOUR TEMPLATE ..............................................................................................................34

RECOMMENDATIONS ............................................................................................................................................35

CONTACTING BOWTHEMES ................................................................................................................................36

Page 3: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

3

Introduction

BT Jenus is an elegant and gorgeous one page template for responsive multi-purpose Joomla websites. It has an especial charm because of incredible parallax background, video background and portfolio filter module with impressive 3D transitions effect. BT Jenus will be the most professional Bowthemes template for both attractive design and powerful usability.

Template Features

Responsive Design

Support for K2 component

Support for BT Portfolio component

Inbuilt Google Fonts configuration

Delivery with 7 powerful Bow Themes' extensions

Delivery with all Adobe Photoshop source files

Improved style of Joomla! Core system pages.

Multiples modules suffix's build-in template for module styling

Inbuilt CSS and Javascript Compression

Compatibility with Joomla 2.5, Joomla 3.x (3.0, 3.2 and 3.3)

Cross Browser Support: IE9+, Firefox 4+, Safari 4+, Chrome 8+, Opera 9+

Well-commented custom.css file for flexible customization

XHTML 1.0 Transitional Check it?

CSS Validates Check it?

Compressed File Contents The BT Jenus Template in zip file has following contents:

Extensions (components, modules and plug-ins)

Documentation

License

Photoshop files

Quickstart package

Screenshots

All the files are contained in a zip archived. You need to extract them by using Winrar, Stuffit or your archiving tools.

Accompanying Extensions This template comes with 07 powerful extensions:

BT Content Slider module

BT Google Map module

BT Background Slideshow module

BT Quick Contact module

BT Portfolio component

BT Portfolio gallery module

BT Tabs module

Note: You can only download version of extensions packed with template. To download upgraded version of extension, please make sure that your membership account is J!Extensions or J!Developers; or you have already bought this extension as the single product.

Template demo: http://demo.bowthemes.com/bt-jenus

Template details: http://bowthemes.com/joomla-templates/bt-jenus.html

Support forum: http://bowthemes.com/forums/61-bt-jenus/

Page 4: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

4

Help and Support

We support

Support service is a part of your purchase. So feel free to ask about Bowthemes product. We engage to support following issues:

1. Issues in the products

2. Usage of our products

4. Non‐documented issues, tips and tricks regarding our software.

5. Minor changes to our products in order to work on the site.

6. If you purchase single product, we do provide support only for ONE of your domain name. You can install Bowthemes

template in multiple sites, but support is for one domain only.

We don’t support

However, there are some unsupported issues:

1. Huge customizations.

2. Massively hacking the core files.

3. Third party extension’s conflict issues.

If you need customizations, please email us for a quote at [email protected].

Support channel

Our support is done via email system, ticket system for premium subscribers and forum support for both premium and non-premium subscribers. At the moment, we do not provide any support via telephone or live chat.

We recommend

*Follow us on Facebook, Twitter, Google+, and LinkedIn

*Remind us about latency of support via Facebook messenger

*Encourage us by voting and leave reviews on Joomla Extension Directory

Page 5: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

5

Installing

Installing Template file or Quickstart package is a common decision. If your website already has content and you just want to change its skin, we suggest you to install template file and choose extensions to add. If you are a Joomla newbie and your website has no or few data, in most cases, installing Quickstart package is the best choice.

1. Installing Quickstart package

* How a Quickstart package works?

A Quickstart package is a whole Joomla website installation kit that installs the template and all of the components and plug-ins

onto your server at once. For each template, Bowthemes provides the Quickstart package to use easily and comfortably. It will

help you save much time on installing and configuring if you plan to start your site quickly. Installing the Quickstart package is

quite easy as you install Joomla generally!

In short, Quickstart = Joomla! + Template + Modules or/and Plugins + Images* + demo content included

Step 1: Download Bow Themes template package:

Download quickstart package from bowthemes.com. Please make sure you download correct package for the Joomla version you

want to use.

Step 2: Unzip Quickstart package

The next step is extracting the file locally identified as quickstart. After the extraction is done, it will contain within all files

needed to perform this type of installation.

Step 3: Extract and upload it to your server

Upload all the files into the directory of your website, where you want to install your new Joomla! project. Depending on upload

speed of your connection or from your server configuration, this process might take several minutes.

If you don't have any FTP software, we recommend FileZilla - a powerful and free FTP solution.

Step 4 : Files Installation.

Once the page opens it should look something like the following image. Select the language you want to use. If you were to

perform a normal installation of Joomla, the website name, Administration e-mail and password would be configured on this

page. However, you will find these fields purposely inaccessible. Remember that this version is prepared by Bow Themes.

So after the installation is complete, you can modify your data log without any problems.

Page 6: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

6

Installation - page 2 is the database page. The details you enter here are important because the actual information for your Joomla

installation is going to be stored at that page. In a word, you need to create a MySQL database, a user for the database and then assign

that user to the database you created. This step requires a slight detour and we need to open up CPanel on our server.

Step 5 : Prepare your database

Open the cpanel account on your server. Most of the

time you find the database cpanel by navigating to

http://www.mysite.com/cpanel. Once you have logged

in, navigate to the database area of the cpanel account.

Depending on the theme, it may look different on your

Page 7: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

7

server. And the following image shows how it looks like on one of our servers.

You can use the database wizard to skip the

process. But for those who have no the wizard on

their cpanel installation, this is the guide to create

the database.

Click on the mysql database icon and write the

name of the database you want to use for your site

in the window provided. You can use any name

you want. Click on the Create database button and you should receive a success message telling you that the database has been

created.

Navigate back to the mysql database page and scroll down to the input boxes of

Create new mysql user.

The username and password you put in here are up to you. However, you should use

the random password generator to improve your Joomla site security.

After clicking Create New User, you will receive the success message and you are

abled to navigate back to the mysql page and scroll down the page again. Take a note

of the username and password - as we will need this later.

You now need to assign the user to the database. So where it says "Add user to

database" select the database and the user you have just created and make sure

they appear in the top and the bottom drop down boxes.

Once you have the new user and new database in the select boxes, you click add and

the following screen will appear.

Assign full or all privileges to the user and click "make changes" submit or add a

user or whichever submit button you have there. Then, you receive another

message telling that your user has been successfully added to the database. You

need to pay close attention to the names they use here as the database prefix and

user prefix need to be filled out at the next step. For example, while doing this

tutorial, the dummy database that is created called test and we can access it on our

server by using bowthemes__jenus.

Step 6: Database Configuration

Select MySQL type of database from drop down list and enter the hostname of the database server Joomla! will be installed on

(normally it's "localhost").

This may not necessarily be the same as your Web server, so check with your hosting provider if you are not sure.

Enter the MySQL username, password and database name that you previously created on your host control panel.

Then press next to go to next step.

Step 7: Install Sample data

Step 8 : Main information configuration

The next page will give you a sense of your server compatibility. You will need to troubleshoot any of the flagged areas that are

unsuitable for a Joomla installation before you continue here. Once you get the all clear, click next again.

Page 8: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

8

Page 9: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

9

Step 9 : End Installation

Congratulations! The installation is successfully completed. However, before you enjoy your new website, you must delete

"installation" directory by Click to button "remove installation folder" or rename/delete it via FTP.

Page 10: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

10

Page 11: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

11

2. Partial installation

If you decide to partially install BT Jenus template, we will guide you through following steps:

Check if you have the system requirement

A working installation of Joomla 2.5 or 3.3

*To install this template you must have a working version of Joomla already installed. For information regarding to installing the Joomla

platform, please refer to:

http://docs.joomla.org/Beginners#Install_Joomla.21

Install BT Jenus template file

Installing the template: In the Joomla Administration panel, please follow these steps:

Step 1: Go to Extension Manager

Step 2: Browse the install package.

Choose file bt_jenus_template_v1.0.zip

Step 3: Click “Upload & Install”

Publishing the template: In the Joomla Administration panel, please follow these steps:

Step 1: Go to Template Manager

Step 2: Find BT Jenus label

Step 3: Click on the star icon at “Default” column to make BT Jenus the default template

Install BT Jenus related extensions

Download the package related extensions named BT_Jenus_all_Extensions_Unzip_first.zip and extract it. In the Joomla Administration

panel, please follow these steps:

Step 1: Go to Extension Manager

Step 2: Browse the install extension

(Choose the extensions in the related

extensions package that you want)

Step 3: Click “Upload & Install”

Page 12: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

12

Template layout

Onepage in BT Jenus (scroll page):

BT Jenus Template contains 9 menu items corresponding with 8 blocks on the menu bar (each block has a module position) and 1 menu link to content (component). When clicking a menu item, page will be scrolled to its own block. Blocks are available created with module positions. And now, you need to create menu items that connect with these blocks. At menu manager: + Menu home: not change + From the second menu item to the sixth one, you create a menu and type an External URL that aims to links this menu item to ID of blocks ( as image above). For example: The 2nd menu item “About us” is corresponded with the block whose ID called “section2”, as such, link of this menu item is “#section2” The 3rd menu item “Work” is corresponded with the block whose ID called “section3”, link of this menu item is “#section3”. … The 8th menu: “Contact” is corresponded the block whose ID called “section8”, link of this menu item is “#section8”. From the block of section 1 to that of section 8, module positions are “position-1”, “position-2”…,and “position-8” respectively. You can assign modules to blocks and positions as you want. See the following illustrated images for each block and position:

Page 13: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

13

Block 1, “Home”, module position: position-1

Block 2, “About us”, module position: position-2, menu item link: #section2

Page 14: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

14

Block 3, “Our services”, module position: position-3, menu item link: #section3

Block 4, “Services”, module position: position-4, menu item link: #section4

Page 15: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

15

Block 5, “Our team”, module position: position-5, menu item link: #section5

Block 6, “Feature”, module position: position-6, menu item link: #section6

Page 16: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

16

Block 7, “Contact us”, module position: position-7, menu item link: #section7

Block 8, “Contact”, module position: position-8, position-8-1, position-8-2, position-8-3, menu item link: #section8

Page 17: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

17

Working with Template Module positions

“Module” of a Joomla Website displays contents at front-end in the way you want. This section will give you an overview of how BT

Jenus template and its modules work together.

1. BT Jenus– All module positions at a quick glance (homepage - scroll page):

Page 18: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

18

Page 19: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

19

Page 20: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

20

2. Module position in content page:

Page 21: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

21

3. How to configure BT Jenus modules

To access module Administration area, please follow this path: Joomla Administration Extensions Module Manager

How to work with those modules? We listed all following necessary BT Jenus modules with detailed instructions, ordered by

their positions in BT Jenus template from top to bottom. You can work with them one by one until you are totally satisfied with

your front-page.

Section 1: position-1 (Module BT Background Slideshow)

This is a module BT Background Slideshow with position “position-1”

- [For Quickstart installation] To change the parameters of the module, please go to Administration -> Select menu Extensions ->

Module Manager -> Select position “position-1”, select module BT Background Slideshow and modify the parameters as you

want. You can change module that is shown in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the same type and set position

“position-1”.

- [For partial installation] Make sure that this module has been installed. Then, published it -> Set position as “position-1”

Assign this module on page that you want (on demo, this module show on homepage only).

Following instruction explains how to configure and show a module in profile panel:

o Images gallery: upload or load your images from social source here

o Slideshow configuration:

Slideshow size: Wrapper Element

Caption: Title-Link and Description

o Navigation configuration:

Nav type: disable

ProgressBar: No

Page 22: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

22

Auto play: Yes.

o Advanced functions:

Wrapper Element: #site-slideshow .section-inner

Header block

a. Logo

To change template logo: there is 2 ways to change: 1st way: please open location: ….\templates\bt_jenus\images replace file “logo.png” with your logo 2nd way: open template manager, and choose your logo image and save in advanced option.

b. Main menu(main left + main right)

+ In module manager: create new module, type: menu, + Assign module on position: “mainnav_left” for left menu, and “mainnav_right” for right menu + Menu assignment module: assign 2 modules on all page.

Section 2: “position-2”

+ Create a new module, type: custom html (This module html code, you can install Quickstart package on local host and see it) + Assign this module on position: “position-2” + Assign module on all page.

Section 3: “position-3” and “position-3-1” a. “Module BT Portfolio gallery, featured works”

Page 23: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

23

- [For Quickstart installation] To change the parameters of the module, please go to Administration -> Select menu Extensions ->

Module Manager -> Select position “position-3”, select module BT Portfolio Gallery and modify the parameters as you want. You can

change module that is shown in profile panel as following instruction.

To replace this module with another module, please disable it then create a new module with the same type and set position

“position-3”.

- [For partial installation] Make sure that this module has been installed. Then, published it -> Set position as “position-3”

Assign this module on page that you want (on demo, this module show on all page).

b. “Module BT Content Slider – Tesimonial”

- [For Quickstart installation] To change the parameters of the module, please go to Administration -> Select menu Extensions ->

Module Manager -> Select position “position-3-1”, select module BT Content Slider and modify the parameters as you want. You can

change module that is shown in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the same type and set position

“position-3-1”.

- [For partial installation] Make sure that this module has been installed. Then, published it -> Set position as “position-3-1”

Assign this module on page that you want (on demo, this module show on all page).

Following instruction explains how to configure and show a module as demo:

o Global setting:

Module class suffix: “[space]testimonial”

Alternative Layout: default-jenus

Number of Rows: 1

Number of Cols: 1

o Source Setting: choose your source here (from Joomla content, K2…)

o Item Layout Setting:

Show Category Name: No

Show Read More: No

Thumbnail width: 99

Thumbnail height: 99

Page 24: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

24

Section 4: “position-4” and “position-3-1”

a. “Module custom html – our services”

+ Create new module, type: custom html (This module html code, you can install Quickstart package on localhost and see it) + Assign this module on position: “position-4” + Assign module on all page.

b. “Module custom html – funfact”

+ Create a new module, type: custom html (This module html code, you can install Quickstart package on localhost and see it) + Assign this module on position: “position-4-1” + Note that: in this module has video html tag, but Joomla editor filter it, so, when you want to create a module like that, please disable Joomla editor first (find and disable in editor plugin manager) + Assign module on all page.

Page 25: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

25

Section 5: “position-5”

“Module custom html – Pricing table”

+ At module manager, create new module, type: custom html (This module html code, you can install Quickstart package on localhost

and see it)

+ Assign this module on position: “position-5”

+Assign module on all page.

Section 6: “position-6”

“Module custom html – Features”

+ At module manager, create new module, type: custom html (This module html code, you can install Quickstart package on localhost

and see it)

+ Assign this module on position: “position-6”

+Assign module on all page.

Page 26: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

26

Section 7: “position-7”

“Module K2 Users”

+ Install K2 component, this module also will be installed and get users from K2 user. + In module manager, create new module, type: K2 Users + Assign module on position: “position-7” + Module configuration:

o Basic options:

Source: Retrieve specific users

Fetch users: By K2 user group

+ Assign module on all page.

Section 8: “position-8” and “position-8-1”, “position-8-2”, “position-8-3”

a. “Module custom html – Button toggle map contact and contact info”

+ At module manager, create new module, type: custom html (This module html code, you can install Quickstart package on local

host and see it)

+ Assign this module on position: “position-8-1”

+ Assign module on all page

b. “Module BT Google Map”

Page 27: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

27

- [For Quickstart installation] To change the parameters of the module, please go to Administration -> Select menu Extensions ->

Module Manager -> Select position “position-8”, select module BT Googlemap and modify the parameters as you want. You can

change module that is shown in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the same type and set position

“position-8”.

- [For partial installation] Make sure that this module has been installed. Then, published it -> Set position as “position-8”

- Assign module on all pages.

c. “Module BT Quick Contact” – contact form

- [For Quickstart installation] To change the parameters

of the module, please go to Administration -> Select menu

Extensions -> Module Manager -> Select position “position-8-

2”, select module BT Googlemap and modify the parameters as

you want. You can change module that is shown in profile

panel as instructions below.

To replace this module with another module, please disable it

then create a new module with the same type and set position

“position-8-2”.

- [For partial installation] Make sure that this module has

been installed. Then, published it -> Set position as “position-

8-2”

- Following instruction explains how to configure and

show a module as demo:

Basic options:

o Admin Email: enter your email here.

Manage Fields: manager your field here.

Assign module on all pages

d. “Module BT Quick Contact” – contact form

+ At module manager, create new module, type: custom html

(This module html code, you can install Quickstart package

on local host and see it)

+ Assign this module on position: “position-8-1”

+ Assign module on all page

Page 28: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

28

Right column: position: “right”

a. “Module BT Quick Contact” – contact form

- [For Quickstart installation] To change the parameters of the module, please go to

Administration -> Select menu Extensions -> Module Manager -> Select position “right”, select

module Search and modify the parameters as you want. You can change module that is shown

in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the same type and set position “right”.

- [For partial installation] please go to Administration -> Select menu Extensions -> Module Manager -> Create new module, type:

Search, set position as “right”, and assign module on page that you want.

- Following instruction explains how to configure and show a module as demo:

Basic Options:

o Search Button: No

o Search Button Image: No

b. “Module Custom HTML” Right social icon:

+ At module manager, create new module, type: custom html (This module html code, you

can install Quickstart package on local host and see it)

+ Assign this module on position: “right”

+ Assign module on pages that you want.

c. “Module BT Content Slider” Slide show images, Free text images

- [For Quickstart installation] To change the parameters of the module, please go to

Administration -> Select menu Extensions -> Module Manager -> Select position “right”, select

module BT Content Slider and modify the parameters as you want. You can change module that

is shown in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the

same type and set position “right”.

- [For partial installation] please go to Administration -> Select menu Extensions -> Module

Manager -> Create new module, type: BT Content Slider, set position as “right”

- Assign module on pages that you want

- Following instruction explains how to configure and show a module as demo:

Global setting:

o Module class suffix: [space]slideshow-images

o Navigation bar: None

o Next Back: Yes

o Number of Rows: 1

o Number of Cols: 1

Source Setting: Choose content from source you want (Joomla content, K2…)

Item Layout Setting:

o Show Category Name: No

o Show Read More: No

o Thumbnail width: 240

o Thumbnail height: 160

Page 29: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

29

d. “Module BT Content Slider” Popular Post

- [For Quickstart installation] To change the parameters of the module, please go to

Administration -> Select menu Extensions -> Module Manager -> Select position “right”, select

module BT Content Slider and modify the parameters as you want. You can change module

that is shown in profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with

the same type and set position “right”.

- [For partial installation] please go to Administration -> Select menu Extensions ->

Module Manager -> Create new module, type: BT Content Slider, set position as “right”

- Assign module on pages that you want.

- Following instruction explains how to configure and show a module as demo:

Global setting:

o Module class suffix: [space]popular-posts

o Navigation bar: None

o Next Back: Yes

o Number of Rows: 4

o Number of Cols: 1

Source Setting: Choose content from source you want (Joomla content, K2…)

Item Layout Setting:

o Show Title

o Description Max Chars: 50

o Show Category Name: No

o Show Read More: No

o Show Date: Yes

o Alignment of image: Left

o Thumbnail width: 80

o Thumbnail height: 80

e. “Module BT Tabs”:

- [For Quickstart installation] To change the parameters of the module, please go to

Administration -> Select menu Extensions -> Module Manager -> Select position “right”, select

module BT Tabs and modify the parameters as you want. You can change module that is shown in

profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the

same type and set position “right”.

- [For partial installation] please go to Administration -> Select menu Extensions -> Module

Manager -> Create new module, type: BT Tabs, set position as “right”

- Following instruction explains how to configure and show a module as demo:

Manager tabs: Add or remove (manager) your tabs here

Effect setting:

o Effect Type: Slide

o Dimensional sliding: Horizontal

Page 30: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

30

f. “Module BT Tabs” Accordion tab

- [For Quickstart installation] To change the parameters of the module, please go to

Administration -> Select menu Extensions -> Module Manager -> Select position “right”, select

module BT Tabs and modify the parameters as you want. You can change module that is shown in

profile panel as instructions below.

To replace this module with another module, please disable it then create a new module with the

same type and set position “right”.

- [For partial installation] please go to Administration -> Select menu Extensions -> Module

Manager -> Create new module, type: BT Tabs, set position as “right”

- Following instruction explains how to configure and show a module as demo:

Manager tabs: Add or remove (manager) your tabs here

Layout setting:

o Layout: accordion

Page 31: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

31

Customize the look of your template

Note: For more convenient work and prevention of your styled file loss, therefore, we suggest writing down your style in custom.css file. To overwrite old style, you may need to use !important css declaration for your style. For example: .logo-image a{ background: url("../images/yourlogo.png")!important; }

Changing Logo, Main Menu, Favicon and website Title a. Changing Logo

There are two ways to change the logo image which is located on top of the template:

Just replace the logo.png on your template folder with the one you want on the top of your site (rename the image file in png first). The

folder’s path is: .../templates/bt_jenus/images

Then open file:

...\templates\bt_jenus\css\custom.cssto change width and height of your logo:

h1.logo{

width: YOUR_LOGO_WIDTH ;

height: YOUR_LOGO_HEIGHT;

}

b. Changing Favicon

Create your favicon, replace file favicon.icon in folder template bt_jenus and clear cache browser.

c. Changing Website Title

In Administration page: Select “Site” menu Global Configuration -> Change your website title.

d. Changing Template color

In back-end page: Select Extensions menu Template manager BT_JenusAdvanced -> Select focus on input, then select

your color -> save.

Page 32: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

32

How to customize content in K2 component

1. Configure images size in K2 component Image size can be set up at “ Images” tab

You may also setting K2 image size in category:

Page 33: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

33

2. Configure Category page

a. Category layout configuration

b. Configuration of item in category listings

Page 34: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

34

How to upgrade your template

We frequently upgrade our templates to catch up with new Joomla trends and prevent our customer from site-hackers. That’s why

template re-installation is must-have skill. Following guide shows how to do it:

Create a backup of your template.

Uninstall template. In the Joomla Administration panel:

Preparation step: Set another template (not BT Jenus) as default Site template.

Action steps: Go to Extension Manager Select Manage Select filter criteria in “Type” box is template Find “BT Jenus” label Click

the checkbox Hit “Uninstall” button

Reinstall template.

a. Download the upgrade package of template and install it.

b. Go to menu Extensions -> Template Manage -> Set “Default” for newly installed template.

c. Replace the code that you have changed

Page 35: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

35

Recommendations

Joomla

Joomla Quickstart guide - http://help.joomla.org/ghop/feb2008/task048/joomla_15_Quickstart.pdf

Joomla Getting Started - http://docs.joomla.org/Getting_Started_with_Joomla%21_1.5

T3 Framework Overview - http://t3-framework.org/documentation/layout-system.html/

Extensions

K2 - http://getk2.org/

BT Content Slider - http://bowthemes.com/joomla-extensions/bt-content-slider.html

BT Google map - http://bowthemes.com/joomla-extensions/bt-google-maps.html

BT Tabs - http://bowthemes.com/joomla-extensions/bt-tabs.html

BT Quick Contact - http://bowthemes.com/joomla-extensions/bt-quick-contact.html

BT Background Slideshow - http://bowthemes.com/bt-background-slideshow.html

BT Porfolio - http://bowthemes.com/joomla-extensions/bt-porfolio-component.html

Page 36: BT Jenus User Manual v1.0 for j!3x

www.bowthemes.com

36

Contacting Bowthemes

All Bowthemes supports include forum support, email support and ticket support. Please refer your membership package to

select the suitable kind of support, as we may be able to solve the problem without delay.

Website: http://bowthemes.com

Forum support: http://bowthemes.com/forums/61-bt-jenus/

Email support: [email protected]

Ticket support: http://bowthemes.com/submit-a-ticket

If you encounter any issues with Bowthemes extensions and templates, email us at [email protected] and we would

like to answer your questions.

This document is proprietary and confidential. No part of this document may be disclosed in any manner to a third party without the

prior written consent of Bowthemes Team.