bs identifier bs title committee status final review outcome

Email your comments to: [email protected] Your email subject line: eg: 2021 Review, BS 10008:2008, IDT/1/3 You must include BS identifier Committee

of 86

January 2021

BS Identifier BS Title Committee Status Final Review Outcome

BS 10:2009 Specification for flanges and bolting for pipes, valves and fittings

PSE/15 current Review closed

BS 1006:B01C:LFS1:1982 Methods of test for colour fastness of textiles and leather. Blue wool standards -- Reference standard for no. 1

TCI/81 confirmed (2016) Reconfirmation











BS 10125:2014+A1:2016 Automotive services. Specification for vehicle damage repair processes

SVS/20 current Confirmation

BS 1016-10:1977 Methods for analysis and testing of coal and coke -- Arsenic in coal and coke

PTI/16 current Review closed

BS 1016-107.2:1991 Methods for analysis and testing of coal and coke. Caking and swelling properties of coal -- Assessment of caking power by Gray-King coke test


BS 1016-108.2:1992 Methods for analysis and testing of coal and coke. Tests special to coke -- Determination of Micum and Irsid indices


BS 10501:2014 Guide to implementing procurement fraud controls

G/2 current Review closed

BS 1052:1980 Specification for mild steel wire for general

engineering purposes

ISE/106 confirmed (2016) Reconfirmation

BS 1090:1970 Specification for flameproof hand-held electric drilling machines primarily for use in mines

MRE/1 confirmed (2016) Reconfirmation

BS 1098-2:1977 Specification for jig bushes -- Metric units MTE/18 current Review closed

BS 1103:1989 Specification for fabrics for the reinforcement of rubber hoses


BS 1125:1987 Specification for WC flushing cisterns (including dual flush cisterns and flush pipes)

B/503 current Review closed

BS 1132:1987 Specification for automatic pipettes LBI/1/2 confirmed (2016) Reconfirmation

BS 1133-8:2011+A1:2016

Packaging code -- Guidance on wooden boxes, cases and crates

PKW/0 current Confirmation

BS 1139-1.2:1990 Metal scaffolding. Tubes -- Specification for aluminium tube


BS 1179-6:1980 Glossary of terms used in the gas industry -

- Combustion and utilization including installation at consumers' premises

GSE/2 confirmed (2016) Reconfirmation

BS 1212-4:2016 Float operated valves -- Specification for compact type float operated valves for WC flushing cisterns (including floats)

B/504 current Confirmation

BS 1214:1977 Specification for hessian sandbags and rot-proofed hessian sandbags


BS 122-1:1953 Specification for milling cutters and reamers -- Milling cutters

MTE/18 current Review closed

BS 122-4:1980 Milling cutters -- Screwed shank end mills and slot drills



of 86

January 2021


BS 123700:2001 System of quality assessment. Sectional

specification. Flex-rigid double-sided printed boards with through-connections

EPL/501 current Confirmation

BS 1296-1:1970 Specification for single point cutting tools -- Shank sections


BS 1296-4:1978 Specification for single point cutting tools -- Ground high speed steel tool bits


BS 1339-1:2002 Humidity -- Terms, definitions and formulae CPI/29 current Confirmation

BS 1339-2:2009 (CD-ROM)

Humidity -- Humidity calculation functions, tables and user guide

CPI/29 current Confirmation

BS 1339-3:2004 Humidity -- Guide to the measurement of humidity

CPI/29 current Confirmation

BS 1363-5:2016 13 A plugs, socket-outlets, adaptors and connection units -- Specification for fused conversion plugs

PEL/23 current Confirmation

BS 1376:1974 Specification for colours of light signals CPL/34/7 confirmed (2016) Reconfirmation

BS 1377-1:2016 Methods of test for soils for civil engineering purposes -- General requirements and sample preparation

B/526/3 current Confirmation

BS 1413:1989 Specification for page size for books PAI/43 current Review closed

BS 1421:1995 Specification for picks, beater picks and mattocks

MTE/15 confirmed (2016) Reconfirmation

BS 1429:1980 Specification for annealed round steel wire for general engineering springs


BS 1438:2004 Aggregates. Single-sized aggregates for use as a medium in biological percolating filters


BS 144:1997 Specification for coal tar creosote for wood preservation


BS 1468:1967 Specification for tin anodes and tin salts for electroplating

STI/33 current Review closed

BS 1545:1990 Specification for liquid toilet soap CII/34 confirmed (2016) Reconfirmation

BS 1552:1995 Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar


BS 1560-3.2:1989 Circular flanges for pipes, valves and fittings (Class designated). Steel, cast iron and copper alloy flanges -- Specification for cast iron flanges

PSE/15 confirmed (2016) Reconfirmation

BS 1561:1966 Specification for silver anodes and silver salts for electroplating


BS 1566-1:2002+A1:2011

Copper indirect cylinders for domestic purposes -- Open vented copper cylinders. Requirements and test methods

B/504/-/10 confirmed (2016) Reconfirmation

BS 1571-2:1975 Specification for testing of positive displacement compressors and exhausters -- Methods for simplified acceptance testing for air compressors and exhausters

MCE/8 current Confirmation

BS 159:1992 Specification for high-voltage busbars and busbar connections

PEL/17 confirmed (2016) Reconfirmation

BS 1595-1:1986 Propan-2-ol (isopropyl alcohol) for industrial use -- Specification for propan-2-ol

(isopropyl alcohol)

CII/26 confirmed (2016) Reconfirmation

BS 1595-2:1984 Propan-2-ol (isopropyl alcohol) for industrial use -- Methods of test


BS 1622:1989 Specification for spreaders for winter maintenance


BS 1625-6 and 4830:1972

Specifications for woven cotton tapes, light, medium and heavy qualities


BS 1640-3:1968 Specification for steel butt-welding pipe fittings for the petroleum industry -- Wrought carbon and ferritic alloy steel fittings. Metric units

ISE/110 current Review closed


of 86

January 2021


BS 1646-2:1983 Symbolic representation for process

measurement control functions and instrumentation -- Specification for additional basic requirements

TPR/1 confirmed (2016) Reconfirmation

BS 1646-3:1984 Symbolic representation for process measurement control functions and instrumentation -- Specification for detailed symbols for instrument interconnection diagrams


BS 1660-3:1988 Machine tapers -- Specification for turret sockets and reduction sleeves with tapped ends for tools with Morse taper shanks


BS 1660-7:1988 Machine tapers -- Specification for extension adaptors with external 7/24 tapers for tools with Morse taper shanks


BS 1715-2.4:1989 Analysis of soaps. Quantitative test methods -- Method for determination of free fatty acids content


BS 1715-2.9:1990 Analysis of soaps. Quantitative test methods. -- Method for determination of EDTA content


BS 1722-12:2016 Fences -- Steel palisade fences. Manufacturing and installation. Specification


BS 1722-16:2009 Fences -- Specification for powder coatings used as a plastics finish to components and mesh


BS 1722-18:2011 Fences -- Specification for free-standing temporary steel mesh perimeter fencing panels

B/201 replaced by BS 1722-18:2020

Confirmation

BS 1722-5:2006 Fences -- Specification for close-boarded fences and wooden palisade fences


BS 1722-8:2006 Fences -- Specification for mild steel (low carbon steel) continuous bar fences and hurdles

B/201 confirmed (2016) Reconfirmation

BS 1722-9:2006 Fences -- Specification for mild steel (low carbon steel) fences with round or square verticals and flat horizontals


BS 1727:1987 Specification for motors for battery operated vehicles

PEL/69 current Review closed

BS 1728-1:1951 Methods for the analysis of aluminium and aluminium alloys -- Determination of copper

NFE/35 confirmed (2016) Reconfirmation

BS 1728-10:1957 Methods for the analysis of aluminium and aluminium alloys -- Determination of manganese (absorptiometric method)


BS 1728-11:1960 Methods for the analysis of aluminium and aluminium alloys -- Determination of silicon (perchloric acid method)


BS 1728-12:1961 Methods for the analysis of aluminium and aluminium alloys -- Determination of silicon (absorptiometric molybdenum blue method)


BS 1728-14:1965 Methods for the analysis of aluminium and aluminium alloys -- Determination of nickel (gravimetric method)


BS 1728-15:1966 Methods for the analysis of aluminium and aluminium alloys -- Determination of nickel (photometric method)


BS 1728-16:1968 Methods for the analysis of aluminium and aluminium alloys -- Determination of chromium (photometric method)


BS 1728-17:1968 Methods for the analysis of aluminium and aluminium alloys -- Determination of chromium (volumetric method)



of 86

January 2021


BS 1728-19:1971 Methods for the analysis of aluminium and

aluminium alloys -- Determination of magnesium (atomic absorption method)


BS 1728-20:1971 Methods for the analysis of aluminium and aluminium alloys -- Determination of lead (atomic absorption method)


BS 1728-21:1973 Methods for the analysis of aluminium and aluminium alloys -- Zinc (atomic absorption method)


BS 1728-22:1972 Methods for the analysis of aluminium and aluminium alloys -- Determination of magnesium (volumetric CDTA method)


BS 1728-23:1976 Methods for the analysis of aluminium and aluminium alloys -- Copper (atomic absorption method)


BS 1728-24:1976 Methods for the analysis of aluminium and aluminium alloys -- Nickel (atomic absorption method)


BS 1728-5:1953 Methods for the analysis of aluminium and aluminium alloys -- Determination of copper (absorptiometric method)


BS 1728-6:1955 Methods for the analysis of aluminium and aluminium alloys -- Determination of iron (volumetric: titanous chloride method)


BS 1728-8:1957 Methods for the analysis of aluminium and aluminium alloys -- Determination of iron (absorptiometric 1:10-phenanthroline method)


BS 1728-9:1957 Methods for the analysis of aluminium and aluminium alloys -- Determination of manganese (volumetric: arsenite/nitrite method)


BS 1741-1:1987 Methods for chemical analysis of liquid milk and cream -- General introduction including preparation of samples

AW/5 confirmed (2016) Reconfirmation

BS 1741-10.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity -- Method for liquid milk


BS 1741-10.2:1989 Methods for chemical analysis of liquid milk and cream. Determination of titratable acidity -- Method for cream


BS 1741-11:1989 Methods for chemical analysis of liquid milk and cream -- Detection of detergent/disinfectant residues


BS 1741-5.1:1988 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk -- Reference method


BS 1741-5.2:1990 Methods for chemical analysis of liquid milk and cream. Determination of the nitrogen content of liquid milk -- Routine method


BS 1741-6.1:1990 Methods for chemical analysis of liquid milk and cream. Determination of casein nitrogen content of liquid milk -- Reference method


BS 1741-6.2:1990 Methods for chemical analysis of liquid milk and cream. Determination of casein nitrogen content of liquid milk -- Routine method


BS 1741-7.1:1989 Methods for chemical analysis of liquid milk and cream. Determination of lactose content -- Reference method


BS 1741-7.2:1989 Methods for chemical analysis of liquid milk and cream. Determination of lactose content -- Routine method



of 86

January 2021


BS 1741-8:1988 Methods for chemical analysis of liquid milk

and cream -- Determination of chloride content of liquid milk


BS 1741-9:1988 Methods for chemical analysis of liquid milk and cream -- Determination of ash from liquid milk


BS 1742-1:1990 Methods for chemical analysis of condensed milks -- General introduction, including preparation of test samples


BS 1742-4:1991 Methods for chemical analysis of condensed milks -- Determination of ash from condensed milks


BS 1742-5.1:1991 Methods for chemical analysis of condensed milks. Determination of nitrogen content -- Reference method


BS 1742-5.2:1991 Methods for chemical analysis of condensed milks. Determination of nitrogen content -- Routine method


BS 1743:1968 Methods for analysis of dried milk and dried milk products

AW/5 replaced by BS 1743-2:1980

Confirmation

BS 1743-1:1986 Methods for analysis of dried milk and dried milk products -- General introduction, including preparation of laboratory samples


BS 1743-19:1985 Methods for analysis of dried milk and dried milk products -- Determination of scorched particles content


BS 1743-4:1980 Methods for analysis of dried milk and dried milk products -- Determination of the dispersibility and the wetting time of instant dried milk


BS 1743-6.1:1983 Methods for analysis of dried milk and dried milk products. Assessment of the heat class of dried milk -- Heat number method (reference method)


BS 1748:Parts 1-5:1961 Methods for the analysis of copper alloys -- Methods for the determination of copper, lead, iron, aluminium and nickel in copper alloys

NFE/34 current Review closed

BS 1748-6:1960 Methods for the analysis of copper alloys -- Method for the determination of tin in copper alloys (nickel coil reduction method)

NFE/34 current Review closed

BS 17898:2014 Code of practice for the management of observed hydrometric data

CPI/113 current Review closed

BS 1813:1974 Specification for dimensions of conduit dies, diestocks and guides


BS 182:1972 Specification for galvanized line-wire for telephone and telegraph purposes


BS 1823:1973 Specification for stainless steel hollow-ware for use in hospital operating-theatres and wards

CH/100 confirmed (2016) Reconfirmation

BS 183:1972 Specification for general purpose galvanized steel wire strand


BS 1834:1968 Specification for isopropyl acetate CII/26 confirmed (2016) Reconfirmation

BS 1835:1991 Specification for 2-ethylhexan-1-ol for industrial use


BS 1842:1952 Specification for double-ended open-jawed spanners for B.A. hexagon sizes


BS 1846-1:1994 Glossary of terms relating to solid fuel burning equipment -- Domestic appliances

RHE/28 confirmed (2016) Reconfirmation

BS 1853-2:1995 Tubular fluorescent lamps for general lighting service -- Specification for lamps used in the United Kingdom not included in BS EN 60081, BS EN 60901, BS EN 61195 and BS EN 61199

CPL/34/1 confirmed (2016) Reconfirmation


of 86

January 2021


BS 1872:1984 Specification for electroplated coatings of

tin


BS 188:1977 Methods for determination of the viscosity of liquids


BS 1881-113:2011 Testing concrete -- Method for making and curing no-fines test cubes


BS 1881-119:2011 Testing concrete -- Method for determination of compressive strength using portions of beams broken in flexure (equivalent cube method)


BS 1881-122:2011 Testing concrete -- Method for determination of water absorption

B/517/1 current Reconfirmation

BS 1881-129:2011 Testing concrete -- Method for determination of density of partially compacted semi-dry fresh concrete

B/517/1 confirmed (2016) Reconfirmation

BS 1881-204:1988 Testing concrete -- Recommendations on the use of electromagnetic covermeters

B/517/1 current Review closed

BS 1881-206:1986 Testing concrete -- Recommendations for

determination of strain in concrete


BS 1881-207:1992 Testing concrete -- Recommendations for the assessment of concrete strength by near-to-surface tests


BS 1881-208:1996 Testing concrete -- Recommendations for the determination of the initial surface absorption of concrete


BS 1881-209:1990 Testing concrete -- Recommendations for the measurement of dynamic modulus of elasticity


BS 1881-211:2016 Testing concrete -- Procedure and terminology for the petrographic examination of hardened concrete


BS 1892-1:1986 Gymnasium equipment -- Specification of general requirements

SW/136/22 current Review closed

BS 1892-2.11:1989 Gymnasium equipment. Particular requirements -- Specification for practice

and games netting and supporting trackways


BS 1892-2.6:1986 Gymnasium equipment. Particular requirements -- Specification for boxing rings

SW/136/22 confirmed (2016) Reconfirmation

BS 1892-2.9:1986 Gymnasium equipment. Particular requirements -- Specification for weight training equipment


BS 1892-3:2003 Gymnasium equipment -- Sports mats. Specification for fire safety requirements for mats, mattresses and landing areas


BS 1892-4:2003 Gymnasium equipment -- Sports mats. Specification for combat mats


BS 1902-10.1:1993 Methods of testing refractory materials. Investment casting shell mould systems -- Determination of resistance to deformation at elevated temperatures

RPI/1 current Review closed

BS 1902-10.2:1994 Methods of testing refractory materials. Investment casting shell mould systems -- Section 10.2: Determination of permeability and standard air flow capacity at elevated temperatures

RPI/1 current Confirmation

BS 1902-3.0:1988 Methods of testing refractory materials. General and textural properties -- Introduction

RPI/1 confirmed (2016) Reconfirmation

BS 1902-3.1:1981 Methods of testing refractory materials. General and textural properties -- Guidance on sampling



of 86

January 2021


BS 1902-3.11:1983 Methods of testing refractory materials.

General and textural properties -- Measurement of dimensions and shape of refractory bricks and blocks (methods 1902-311)


BS 1902-3.14:1996 Methods of testing refractory materials. General and textural properties -- Determination of hydration tendency


BS 1902-3.16:1990 Methods of testing refractory materials. General and textural properties -- Determination of pore size distribution (method 1902-316)


BS 1902-3.17:1990 Methods of testing refractory materials. General and textural properties -- Determination of volume and bulk density of dense shaped products (methods 1902-317)


BS 1902-3.2:1981 Methods of testing refractory materials. General and textural properties -- Measurement of dimensions of specimens for testing (methods 1902-302)


BS 1902-3.3:1981 Methods of testing refractory materials. General and textural properties -- Sieve analysis (methods 1902-303)


BS 1902-4.6:1985 Methods of testing refractory materials. Properties measured under an applied stress -- Determination of resistance to abrasion at ambient temperature (method 1902-406)

RPI/1 current Withdrawal

BS 1902-5.0:1992 Methods of testing refractory materials. Refractory and thermal properties -- Introduction


BS 1902-5.11:1986 Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal spalling

resistance by the prism test (method 1902-511)


BS 1902-5.13:1984 Methods of testing refractory materials. Refractory and thermal properties -- Determination of resistance to attack by slag (method 1902-513)


BS 1902-5.14:1992 Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (temperatures up to 1500$0DC) (methods 1902-5.14)


BS 1902-5.3:1990 Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal expansion (horizontal method to 1100$0DC) (method 1902-503)


BS 1902-5.5:1991 Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (panel/calorimeter method) (method 1902-505)


BS 1902-5.8:1992 Methods of testing refractory materials. Refractory and thermal properties -- Determination of thermal conductivity (split column method) (method 1902-508)


BS 1902-6:1986 Methods of testing refractory materials -- Ceramic fibre products



of 86

January 2021


BS 1902-9.2:1987 Methods of testing refractory materials.

Chemical analysis by instrumental methods -- Analysis of silica refractories by X-ray fluorescence


BS 1911:1990 Specification for hard soap CII/34 confirmed (2016) Reconfirmation

BS 1912:1990 Specification for soap flakes CII/34 confirmed (2016) Reconfirmation

BS 1913:1990 Specification for soft soap CII/34 confirmed (2016) Reconfirmation

BS 1914:1990 Specification for toilet soap CII/34 confirmed (2016) Reconfirmation

BS 1916-1:2009 Limits and fits for engineering -- Guide to limits and tolerances

TPR/1/10 current Review closed

BS 1916-2:2009 Limits and fits for engineering -- Guide to the selection of fits in BS 1916-1


BS 1916-3:2009 Limits and fits for engineering -- Guide to tolerances, limits and fits for large diameters


BS 192-1:1996 Open-ended wrenches -- Metric and unified MTE/15 confirmed (2016) Reconfirmation

BS 1922:1987+A2:2011 Specification for glass dispensing measures for pharmaceutical purposes

LBI/1/2 confirmed (2016) Reconfirmation

BS 1935:1972 Specification for spindle noses and adjustable adaptors for multi-spindle heads


BS 1937:1953 Specification for engineers' ratchet braces and drilling pillars


BS 1940:1987 Specification for butanone (ethyl methyl ketone) for industrial use


BS 1941:1993 Specification for 4-methylpentan-2-one (isobutyl methyl ketone) for industrial use


BS 1943:1989 Specification for woodworking chisels and gouges


BS 1978:1965 Specification for bit braces MTE/15 confirmed (2016) Reconfirmation

BS 1983-1:1969 Specification for chucks for machine tools and portable power tools -- Tool-holding chucks


BS 1983-5:1989 Chucks for machine tools and portable power tools -- Code of practice for the safe operation of workholding chucks used on lathes


BS 1990-1:1984 Wood poles for overhead power and telecommunication lines -- Specification for softwood poles


BS 1994:1993 Specification for dichloromethane (methylene chloride)


BS 2000-10:2011 Methods of test for petroleum and its products -- Determination of kerosine burning characteristics 24-hour method

PTI/13 confirmed (2016) Reconfirmation

BS 2000-112:2005+A1:2014

Methods of test for petroleum and its products -- Determination of corrosiveness to copper of lubricating grease. Copper strip method


BS 2000-121:2005+A1:2014

Methods of test for petroleum and its products -- Determination of oil separation

from lubricating grease. Pressure filtration method


BS 2000-138:2002 Methods of test for petroleum and its products -- Determination of oxidation stability of aviation fuel. Potential residue method


BS 2000-19:2011 Methods of test for petroleum and its products -- Determination of demulsibility characteristics of lubricating oil (Identical with IP 19/11)



of 86

January 2021


BS 2000-306:2011 Methods of test for petroleum and its

products -- Determination of oxidation stability of straight mineral oil (Identical with IP 306/11)


BS 2000-455:2011 Methods of test for petroleum and its products -- Determination of the manganese content of gasoline. Atomic absorption spectrometry (AAS) method


BS 2000-48:2011 Methods of test for petroleum and its products -- Determination of oxidation characteristics of lubricating oil (Identical with IP 48/11)


BS 2003:1974 Specification for mild steel drums (light duty: removable heads)

PKW/0/-/4 partially replaced by BS 2003-1:1987

Confirmation

BS 2007:1975 Specification for circular gear shaving cutters, 1 to 8 metric module, accuracy requirements

MCE/5 confirmed (2016) Reconfirmation

BS 2054:1953 Specification for augers and auger bits MTE/15 confirmed (2016) Reconfirmation

BS 2059:1953 Specification for straight-sided splines and serrations

MCE/5 current Review closed

BS 2068:1970 Specification for acetic anhydride CII/26 confirmed (2016) Reconfirmation

BS 2069:1954 Specification for gas sampling tubes LBI/1/2 current Review closed

BS 2071:1989 Specification for Soxhlet extractors LBI/1/2 current Review closed

BS 2090:1954 Specification for hook spanners, peg spanners, coupling wrenches and the related slots, holes and horns


BS 22475-2:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements -- Qualification criteria for enterprises and personnel


BS 22475-3:2011 Geotechnical investigation and testing. Sampling methods and groundwater measurements -- Conformity assessment of enterprises and personnel by third party


BS 227:1995 Specification for H-section steel arches for use in mines


BS 245:1976 Specification for mineral solvents (white spirit and related hydrocarbon solvents) for paints and other purposes

STI/10 confirmed (2016) Reconfirmation

BS 2453:1973 Specification for steel wire for spokes ISE/106 confirmed (2016) Reconfirmation

BS 2468-1:1994 Glossary of terms and classification relating to agricultural machinery and implements. -- Power and tractive units

AGE/6 confirmed (2016) Reconfirmation

BS 2468-3:1995 Glossary of terms and classification relating to agricultural machinery and implements -- Soil working equipment

AGE/32 current Review closed

BS 248:1969 Specification for light rails and fishplates for use at mines


BS 2482:2009 Specification for timber scaffold boards B/514 current Review closed

BS 2485:1987 Specification for tee slots, tee bolts, tee

nuts and tenons


BS 2501:1992 Specification for commercial refrigerated storage cabinets of the closed reach-in type

RHE/19 current Review closed

BS 2511:1970 Methods for the determination of water (Karl Fischer method)


BS 2518-1:1954 Specification for rotary form relieved gear cutters -- Diametral pitch


BS 2518-2:1977 Specification for rotary form relieved gear cutters -- Metric module


BS 2523:1966 Specification for lead-based priming paints STI/21 partially replaced by BS 5082:1974 and BS 5358:1976

Confirmation


of 86

January 2021


BS 2556:1973 Specification for hand and breast drills MTE/15 confirmed (2016) Reconfirmation

BS 2558:1954 Specification for tubular box spanners MTE/15 confirmed (2016) Reconfirmation

BS 2558:Supplement No. 1:1968

Metric sizes MTE/15 confirmed (2016) Reconfirmation

BS 2559:1994 Specification for screwdrivers and screwdriver accessories


BS 2559-3:1973 Specification for screwdrivers -- Insulated screwdrivers


BS 2571:1990 Specification for general-purpose flexible PVC compounds for moulding and extrusion

PRI/82 current Review closed

BS 2572:1990 Specification for phenolic laminated sheet and epoxy cotton fabric laminated sheet

GEL/15 confirmed (2016) Reconfirmation

BS 2574-1:1991 Lower limb orthoses -- Guide to the design and manufacture of lower limb orthoses, excluding foot orthoses

CH/168 current Review closed

BS 2574-2:1994 Lower limb orthoses -- Specification for hip, knee and ankle joints for lower limb orthoses


BS 2583:1955 Specification for podger spanners MTE/15 confirmed (2016) Reconfirmation

BS 2588-1:1992 Portable sanitary pans for use in healthcare establishments. -- Specification for reusable bed pans


BS 2588-2:1992 Portable sanitary pans for use in healthcare establishments -- Specification for reusable pans for commode chairs


BS 2589:1955 Specification for railway track spanners MTE/15 confirmed (2016) Reconfirmation

BS 2593:1974 Specification for rotary drill rods and tungsten carbide tipped rotary drill bits


BS 2626:1992 Specification for lubricants for refrigerant compressors


BS 2633:1987 Specification for Class I arc welding of ferritic steel pipework for carrying fluids

WEE/21 confirmed (2016) Reconfirmation

BS 2646-1:1993 Autoclaves for sterilization in laboratories -- Specification for design, construction,

safety and performance


BS 2646-2:1990 Autoclaves for sterilization in laboratories -- Guide to planning and installation


BS 2646-3:1993 Autoclaves for sterilization in laboratories -- Guide to safe use and operation


BS 2646-4:1991 Autoclaves for sterilization in laboratories -- Guide to maintenance


BS 2646-5:1993 Autoclaves for sterilization in laboratories -- Methods of test for function and performance


BS 2648:1955 Performance requirements for electrically-heated laboratory drying ovens

EPL/66 confirmed (2016) Reconfirmation

BS 2655-1:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for electric, hydraulic and hand-powered lifts

MHE/4 partially replaced by Parts 1, 2, 3 and 14 of BS 5655

Review closed

BS 2655-10:1972 Specification for lifts, escalators, passenger

conveyors and paternosters -- General requirements for guarding

MHE/4 partially replaced by

BS 5655-1:1979, BS 5655:Part 6:1985 and BS 5656:1983

Confirmation

BS 2655-4:1969 Specification for lifts, escalators, passenger conveyors and paternosters -- General requirements for escalators and passenger conveyors

MHE/4 replaced by BS 5656:1983 due to existing approvals. Please see full details given in AMD 4421

Confirmation

BS 2655-6:1970 Specification for lifts, escalators, passenger conveyors and paternosters -- Building construction requirements

MHE/4 partially replaced by Parts 1, 2, 3 and 14 of BS 5655

Confirmation


of 86

January 2021


BS 2655-7:1970 Specification for lifts, escalators, passenger

conveyors and paternosters -- Testing and inspection

MHE/4 partially replaced by

BS 5655-1:1979 and BS 5655-10:1986

Confirmation

BS 2655-8:1971 Specification for lifts, escalators, passenger conveyors and paternosters -- Modernization or reconstruction of lifts, escalators and paternosters

MHE/4 partially replaced by Parts 1, 11 and 12 of BS 5655

Confirmation

BS 2657:1974 Specification for fluoroboric acid and metal fluoroborates for electroplating


BS 2692-2:1956 Fuses for voltages exceeding 1000 V a.c. -- Expulsion fuses


BS 2697:1976 Specification for rack type gear cutters, metric module


BS 2713:1966 Specification for 2-ethoxyethanol (ethylene glycol monoethyl ether)


BS 2737:1956 Terminology of internal defects in castings as revealed by radiography


BS 2742:2009 Use of the Ringelmann and miniature

smoke charts

EH/2/1 current Review closed

BS 2742C:1957 Ringelmann chart EH/2/1 confirmed (2016) Reconfirmation

BS 2742M:1960 Miniature smoke chart EH/2/1 confirmed (2016) Reconfirmation

BS 2782-0:2011 Methods of testing plastic -- Introduction PRI/21 confirmed (2016) Reconfirmation

BS 2782-1:Method 131B:1983

Methods of testing plastics. Thermal properties -- Determination of extensibility after heat ageing of flexible polyvinyl chloride sheet

PRI/75 confirmed (2016) Reconfirmation

BS 2782-1:Method 140D:1997

Methods of testing plastics. Thermal properties -- Flammability of a test piece 550 mm x 35 mm of thin polyvinyl chloride sheeting (laboratory method)

PRI/26 confirmed (2016) Review closed

BS 2782-1:Method 140E:1982

Methods of testing plastics. Thermal properties -- Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method)

PRI/26 confirmed (2016) Review closed

BS 2782-1:Method 150C:1983

Methods of testing plastics. Thermal properties -- Determination of low temperature extensibility of flexible polyvinyl chloride sheet


BS 2782-1:Method 150D:1976

Methods of testing plastics. Thermal properties -- Cold crack temperature of film and thin sheeting


BS 2782-10:Method 1006:1978

Methods of testing plastics. Glass reinforced plastics -- Determination of volatile matter and resin content of synthetic resin-impregnated textile glass fabric


BS 2782-11:Method 1108A:1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves -- True impact rate (TIR) boundaries of pipes

PRI/88/4 current Review closed

BS 2782-11:Method 1109A:1989

Methods of testing plastics. Thermoplastics pipes, fittings and valves -- Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications


BS 2782-3:Method 360C:1991

Methods of testing plastics. Mechanical properties -- Determination of tear resistance of plastics film and sheeting by the initiation method


BS 2782-4:Methods 451F to 451J:1978

Methods of testing plastics. Chemical properties -- Determination of formaldehyde (colorimetric method), formaldehyde (gravimetric method), sulphates and chlorides in phenolic mouldings

PRI/21 current Confirmation


of 86

January 2021


BS 2782-6:Method

643A:1976

Methods of testing plastics. Dimensional

properties -- Shrinkage on heating of film intended for shrink wrapping applications


BS 2782-7:Method 721A:1988

Methods of testing plastics. Rheological properties -- Determination of resin flow from resin impregnated glass fabric


BS 2782-8:Method 826A:1992

Methods of testing plastics. Other properties -- Determination of adhesion of print on plastics sheet


BS 2782-8:Methods 823A and 823B:1978

Methods of testing plastics. Other properties -- Methods for the assessment of carbon black dispersion in polyethylene using a microscope


BS 2790:1992 Specification for design and manufacture of shell boilers of welded construction

PVE/2 current Confirmation

BS 2797:1976 Specification for leathers for gas meter diaphragms


BS 2819:1990+A2:2016 Methods for determination of bow, skew

and lengthway distortion in knitted fabrics

TCI/24 current Confirmation

BS 282; 389:1963 Specifications for lead chromes and zinc chromes for paints


BS 2832:1957 Specification for hot applied damp resisting coatings for solums


BS 2853:2011 Specification for the testing of steel overhead runway beams for hoist blocks

CB/203 confirmed (2016) Reconfirmation

BS 2857:1976 Specification for nickel-iron transformer and choke laminations


BS 2868:1968 Specification for cadmium anodes and cadmium oxide for electroplating


BS 2880:1991 Methods of testing cellulose acetate flake PRI/82 confirmed (2016) Reconfirmation

BS 2919:1968 Specification for low and intermediate density polythene rod for general purposes


BS 2945:1995 Specification for axes and hatchets MTE/15 confirmed (2016) Reconfirmation

BS 2957:1958 Specification for fireman's axe with ash

handle


BS 2971:1991 Specification for class II arc welding of carbon steel pipework for carrying fluids


BS 2977:1958 Domestic lighting appliances for use with liquefied petroleum gases


BS 2982:1992 Specification for materials and packaging of surgical scalpels with detachable blades


BS 2A 241:2005+A2:2011

General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater. Specification

ACE/12 confirmed (2016) Reconfirmation

BS 2A 293:2005 Procurement of self-locking nuts with non-metallic locking elements. Metric series. Specification


BS 2B 100:2009 Procedure for inspection, testing and acceptance of wrought copper alloys

ACE/61 current Review closed

BS 2B 23:2009 Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock

and forgings

ACE/61/-/16 current Review closed

BS 2B 24:2009 Specification for copper-tin-phosphorous alloy rods and sections


BS 2C 13:1988 Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)

ACE/57 confirmed (2020) Review closed

BS 2C 4:1973 Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections


BS 2C 5:1976 Specification for mating dimensions for liquid oxygen replenishment couplings


BS 2F 52:1959 Flax reinforcement webbing for aeronautical purposes



of 86

January 2021


BS 2G 111:1955 Specification for rate of climb indicators for

aircraft


BS 2G 114:1953 Specification for direct current ratiometer indicators for aircraft


BS 2G 115:1956 Specification for sensitive altimeters for aircraft


BS 2G 117:1975 Specification for pressure-driven airspeed indicators


BS 2G 124-1:1966 Specification for a.c. generators for aircraft -- Constant frequency


BS 2G 124-2:1966 Specification for a.c. generators for aircraft -- Variable frequency


BS 2G 134:1970 Specification for d.c. generators ACE/1 current Review closed

BS 2G 135:1967 Specification for electrically-heated pitot and pitotstatic pressure heads


BS 2G 143:1965 Specification for a.c. and d.c. rotary and linear actuators for aircraft


BS 2G 146:1966 Specification for d.c. motors for aircraft ACE/1 current Review closed

BS 2G 147-1:1966 Specification for a.c. motors for aircraft -- Three-phase constant frequency squirrel-cage induction motors


BS 2G 147-2:1966 Specification for a.c. motors for aircraft -- Three-phase variable frequency squirrel-cage induction motors


BS 2G 182:1975 Specification for pressure-driven machmeters for aircraft


BS 2G 191:1988 Specification for lighting for aircraft indicators using integral filament lamps


BS 2G 199:1984 Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration


BS 2G 239:1992 Specification for primary active lithium batteries for use in aircraft


BS 2HC 204:1989 Specification for nickel-cobalt-chromium-aluminium-titanium-molybdenum alloy castings (Nickel base Co 15.0, Cr 10.0, Al 5.5, Ti 4.8, Mo 3.0)

ACE/61/-/48 current Confirmation

BS 2HC 207:1989 Specification for nickel-cobalt-tungsten-chromium-aluminium-tantalum-hafnium-titanium alloy castings (Nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Ta 2.5, Hf 1.5, Ti 1.5)


BS 2HC 208:1989 Specification for nickel-cobalt-tungsten-chromium-aluminium-molybdenum-titanium-tantalum alloy castings (nickel base Co 10.0, W 10.0, Cr 9.0, Al 5.5, Mo 2.5, Ti 1.5, Ta 1.5)


BS 2HC 211:1989 Specification for nickel-chromium-cobalt-molybdenum-aluminium-titanium alloy castings (Nickel base Cr 15.5, Co 10.0, Mo 8,3, Al 4.2, Ti 3.6)

ACE/61/-/48 confirmed (2014) Review closed

BS 2HR 203:2009 Specification for nickel-chromium-titanium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 0.4)


BS 2HR 204:2009 Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resisting alloy plate, sheet and strip (nickel base, Cr 21.7, Fe 18.5, Mo 9, Co 1.5, W 0.6)


BS 2HR 206:2009 Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)



of 86

January 2021


BS 2HR 207:2009 Specification for nickel-iron-chromium-

molybdenum-aluminium-titanium heat-resisting alloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5, Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)


BS 2HR 240:2011 Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy plate, sheet and strip (Cobalt base, Cr 20, W 15, Ni 10, Mn 1.5)

ACE/61/-/48 confirmed (2016) Reconfirmation

BS 2HR 402:2011 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


BS 2HR 403:2011 Specification for nickel-chromium-titanium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 0.4)


BS 2HR 404:2011 Specification for nickel-cobalt-chromium-molybdenum- titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)


BS 2HR 650:2011 Specification for high expansion heat-resisting steel bar and wire for manufacture of bolts, studs, set screws, nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm)


BS 2L 126:1970 Specification for ingots and castings of magnesium-cerium-zinc-zirconium alloy (precipitation treated) (rare earth metals 3.0, Zn 2.3, Zr 0.6)


BS 2L 128:1970 Specification for ingots and castings of magnesium-zinc-cerium-zirconium alloy (precipitation treated) (Zn 4.5, rare earth metals 1.2, Zr 0.7)


BS 2L 77:1971 Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-

manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)


BS 2L 95:1971 Specification for plate of aluminium-zinc-magnesium-copper-chromium alloy (solution treated, controlled stretched and precipitation treated) (Zn 5.8, Mg 2.5, Cu 1.6, Cr 0.15)


BS 2L 99:1972 Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and precipitation treated) (Si 7, Mg 0.3)


BS 2M 47:1990 Specification for retreading of cross ply tyres for aircraft


BS 2S 129:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)


BS 2S 130:1976 Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)


BS 2S 131:1977 Specification for high thermal expansion steel billets, bars, forgings and parts (620 MPa: limiting ruling section 150 mm)


BS 2S 135:1977 Specification for 1% carbon-chromium steel billets, bars, forgings and parts (limiting ruling section 25 mm)



of 86

January 2021


BS 2S 137:1976 Specification for high chromium-nickel

corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)


BS 2S 142:1977 Specification for 1% chromium-molybdenum steel billets, bars, forgings and parts (900-1100 MPa: limiting ruling section 40 mm)


BS 2S 143:1976 Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)


BS 2S 146:1976 Specification for 4% nickel-chromium-molybdenum air-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1760-1960 MPa: limiting ruling section 100 mm)


BS 2S 147:1976 Specification for 0.5% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts


BS 2S 149:1976 Specification for 1.75% nickel-chromium-molybdenum steel bars for the manufacture of forged bolts and forged nuts


BS 2S 201:2004+A1:2011

Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty unground wire. Specification


BS 2S 202:2004+A1:2011

Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification


BS 2S 203:2004 Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification


BS 2S 204:2004 Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification


BS 2S 205:2004 Austenitic chromium-nickel steel wire rod, wire and springs. Specification


BS 2S 92:1964 Specification for aircraft material. Carbon-manganese steel (suitable for welding) (40/55 tonf/sq in: limiting ruling section 4 in)

ACE/61/-/15 current Reconfirmation

BS 2S 93:1964 Specification for aircraft material. '40' carbon steel (normalized) (35/45 tonf/sq in: limiting ruling section 6 in)


BS 2SP 90:2008+A1:2016

Specification for corrosion-resisting steel split cotter pins for aircraft. Inch series

ACE/12 current Confirmation

BS 2TA 38:2009 Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon- carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)


BS 2TA 39:2009 Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1250-1420 MPa) (limiting ruling section 25 mm)


BS 2TA 40:2009 Specification for bar for machining of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)


BS 2TA 41:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)



of 86

January 2021


BS 2TA 42:2009 Specification for forgings of titanium-

aluminium- molybdenum-tin-silicon-carbon alloy (tensile strength 1205-1375 MPa) (limiting ruling section over 25 mm up to and including 75 mm)


BS 2TA 45:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1100-1280 MPa) (limiting ruling section 25 mm)


BS 2TA 46:2009 Specification for bar and section for machining of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section over 25 mm up to and including 100 mm)


BS 2TA 47:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1050-1220 MPa) (limiting ruling section 100 mm)


BS 2TA 49:2009 Specification for bar and section for machining of titanium-aluminium- molybdenum-tin-silicon-carbon alloy (Tensile strength 1000-1200 MPa) (Limiting ruling section over 100 mm up to and including 150 mm)


BS 2TA 50:2009 Specification for forging stock of titanium- aluminium-molybdenum-tin-silicon alloy (tensile strength 1000-1200 MPa) (limiting ruling section over 100 mm up to and including 150 mm)


BS 2TA 52:2009 Specification for sheet and strip of titanium- copper alloy (tensile strength 690-920 MPa)


BS 2TA 56:2009 Specification for plate of titanium-aluminium-vanadium alloy (tensile strength

895-1150 MPa) (maximum thickness 100 mm)


BS 2TA 57:2009 Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength 1030-1220 MPa) (thickness over 50 mm up to and including 65 mm)


BS 2TA 58:2009 Specification for plate of titanium-copper alloy (tensile strength 520-640 MPa) (maximum thickness 10 mm)


BS 2TA 59:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)


BS 2X 26:2001 Doping and finishing schemes for fabric covered aircraft


BS 2X 34:1998 Specification for two component polyurethane finish for aerospace purposes


BS 3012:1970 Specification for low and intermediate density polythene sheet for general purposes


BS 302-5:1987 Stranded steel wire ropes -- Specification for ropes for hauling purposes

MHE/2 current Review closed

BS 3046:1981 Specification for adhesives for hanging flexible wallcoverings


BS 3054:1959 Specification for fireman's axe with rubber insulated handle


BS 3056-1:1985 Sizes of refractory bricks -- Specification for multi-purpose bricks


BS 3056-2:1985 Sizes of refractory bricks -- Specification for bricks for use in glass-melting furnaces



of 86

January 2021


BS 3056-7:1992 Sizes of refractory bricks -- Specification for

basic bricks for steel making


BS 3056-8:1987 Sizes of refractory bricks -- Specification for bricks for ladles


BS 3063:1965 Specification for dimensions of gaskets for pipe flanges


BS 3066:1995 Specification for engineers' cold chisels and allied tools


BS 3087-1:1991 Pliers and nippers -- General introduction MTE/15 confirmed (2016) Reconfirmation

BS 3087-10:1991 Pliers and nippers -- Specification for dimensions of tools not standardized by ISO


BS 3088:1959 Specification for adjustable hand reamers with inserted blades


BS 3095-1.2:1988 Methods for determination of the freezing-point depression of milk. Methods -- Hortvet method


BS 3095-2:1988 Methods for determination of the freezing-point depression of milk -- Recommendations for the interpretation of the freezing-point depression of herd milk

AW/5 confirmed (2016) Review closed

BS 3095-3:1981 Methods for determination of the freezing-point depression of milk -- Storage of samples


BS 3101:1986 Specification for control and interlock circuits primarily associated with flameproof restrained plugs and sockets for use in coal mines


BS 3104:1970 Specification for polyamide (nylon) mountaineering ropes


BS 31100:2011 Risk management. Code of practice and guidance for the implementation of BS ISO 31000

RM/1 confirmed (2016) Reconfirmation

BS 3123:1959 Specification for spring calipers and spring dividers


BS 3130-4:1976 Glossary of packaging terms -- Metal containers and aerosols

PKW/0/-/8 partially replaced by BS EN 13045, BS EN 13046, BS EN 13047 and BS EN 13048:2000

Review closed

BS 3137:1972 Methods for determining the bursting strength of paper and board

PAI/11 current Review closed

BS 3144:Addendum No. 1:1981

Sampling and physical testing of leather -- Determination of resistance to bending and abrasion of heavy leather



Sampling and physical testing of leather -- Measurement of water vapour absorption


BS 3159-1:1999 Woodworking saws for hand use -- Specification for hand saws


BS 3159-2:1993 Woodworking saws for hand use -- Specification for tenon and dovetail saws


BS 3165:2009 Rubber suction hose and hose assemblies with semi-embedded wire helix for fire-fighting purposes. Requirements and test methods

FSH/17 current Review closed

BS 3181-1:1987 Methods for determination of cotton fibre properties by the airflow method -- Determination of micronaire value by the single compression airflow method

TCI/24 current Review closed

BS 3183:1968 Method for the determination of wool fibre diameter by the airflow method


BS 3214:1974 Specification for locking connectors for battery operated vehicles (320 ampere rating)



of 86

January 2021


BS 3215:1995 Specification for reusable portable urinals CH/100 confirmed (2016) Reconfirmation

BS 3221-1:1985 Medicine measures -- Specification for medicine measures of 50 ml total graduated capacity


BS 3221-6:1987 Medicine measures -- Specification for free-standing plastics medicine measuring spoons of 5 mL capacity


BS 3221-7:1995 Medicine measures -- Specification for oral syringes delivering doses up to and including 5 ml


BS 3224-1:1988 Lighting fittings for civil land aerodromes -- Specification for lighting units for use in precision approach path indicator systems


BS 3224-4:1988 Lighting fittings for civil land aerodromes -- Specification for elevated lighting units


BS 3224-6:1988 Lighting fittings for civil land aerodromes -- Specification for obstacle lighting units


BS 3237:1960 Specification for light and medium rolling stock for mineral haulage in mines


BS 3238-1:1960 Graphical symbols for components of servo-mechanisms -- Transductors and magnetic amplifiers

PH/8/1 confirmed (2016) Reconfirmation

BS 3238-2:1964 Graphical symbols for components of servo-mechanisms -- General servo-mechanisms

PH/8/1 confirmed (2016) Reconfirmation

BS 3247:2011+A1:2016 Specification for salt for spreading on highways for winter maintenance


BS 3279:1960 Specification for seedlac STI/10 confirmed (2016) Reconfirmation

BS 328-1:1993 Drills and reamers -- Specification for twist drills

MTE/18 confirmed (2014) Review closed

BS 328-2:1972 Drills and reamers -- Combined drills and countersinks (centre drills)


BS 328-3:1983 Drills and reamers -- Specification for the dimensions of core drills


BS 328-4:1983 Drills and reamers -- Specification for

dimensions of reamers


BS 328-5:1983 Drills and reamers -- Specification for the dimensions of countersinks and counterbores


BS 3288-1:2014 Insulator and conductor fittings for overhead power lines -- Performance and general requirements


BS 3288-2:2009 Insulator and conductor fittings for overhead power lines -- Specification for a range of insulator fittings


BS 3293:1960 Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry


BS 3322:1981 Specification for carpenters' squares and bevels


BS 3332:1987 Specification for white metal bearing alloy ingots


BS 3338-10:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of iron in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)


BS 3338-11:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of tin in solders (nickel coil reduction method)



of 86

January 2021


BS 3338-13:1965 Methods for the sampling and analysis of

tin and tin alloys -- Method for the determination of antimony in solders and white metal bearing alloys (volumetric: potassium bromate method)


BS 3338-14:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the sampling of white metal bearing alloy ingots


BS 3338-15:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of copper and lead in white metal bearing alloys (electrodeposition method)


BS 3338-16:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of tin in white metal bearing alloys (nickel coil reduction method)


BS 3338-17:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of cadmium in solders and white metal bearing alloys (photometric method)


BS 3338-18:1966 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of aluminium in solders and white metal bearing alloys (photometric method)


BS 3338-19:1966 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of zinc in solders and white metal bearing alloys (photometric method)


BS 3338-2:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of tin in ingot tin (aluminium reduction method)


BS 3338-20:1970 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of nickel in capping metal (photometric method)


BS 3338-21:1983 Methods for the sampling and analysis of tin and tin alloys -- Determination of high cadmium content of soft solders


BS 3338-3:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of antimony in ingot tin (photometric method)


BS 3338-4:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of copper in ingot tin and tin-lead solders (photometric method)


BS 3338-5:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of lead in ingot tin and tin-antimony solders (photometric method)


BS 3338-6:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of copper in high purity ingot tin (photometric method)


BS 3338-7:1961 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of silver in solders (volumetric: ammonium thiocyanate method)



of 86

January 2021


BS 3338-8:1961 Methods for the sampling and analysis of

tin and tin alloys -- Method for the determination of bismuth in ingot tin, tin-lead solders and white metal bearing alloys (photometric method)


BS 3338-9:1965 Methods for the sampling and analysis of tin and tin alloys -- Method for the determination of arsenic in ingot tin, solders and white metal bearing alloys (photometric method)


BS 3367:1999 Specification for ropes and lines for fire service use other than for rope rescue purposes


BS 3379:2005+A1:2011 Combustion modified flexible polyurethane cellular materials for loadbearing applications. Specification


BS 3381:1989 Specification for spiral wound gaskets for steel flanges to BS 1560


BS 3388:2004 Forks, shovels and spades. Requirements and test methods


BS 3396-1:1991 Woven glass fibre fabrics for plastics reinforcement -- Specification for loom-state fabrics


BS 3408:1992 Specification for tarpaulins TCI/77 confirmed (2016) Reconfirmation

BS 341-1:1991 Transportable gas container valves -- Specification for industrial valves for working pressures up to and including 300 bar

PVE/3/1 partially replaced by BS 341-3:2002, BS EN 849:1997, BS EN 14189:2003, BS EN ISO 13340:2001,BS EN ISO 14246 and BS 341-4:2004

Review closed

BS 341-2:1963 Transportable gas container valves -- Valves with taper stems for use with breathing apparatus

PVE/3/1 partially replaced by BS 341-1:1991

Review closed

BS 3412:1992 Methods of specifying general purpose

polyethylene materials for moulding and extrusion


BS 341-4:2004 Transportable gas container valves -- Pressure relief devices

PVE/3/1 confirmed (2016) Reconfirmation

BS 3424-0:2000 Testing coated fabrics -- Index of parts TCI/24 confirmed (2016) Reconfirmation

BS 3424-10:1987 Testing coated fabrics -- Methods 12A and 12B Determination of surface drag


BS 3424-13:1999 Testing coated fabrics -- Guide to the selection of methods for colour fastness to light testing


BS 3424-14:1985 Testing coated fabrics -- Method 16. Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear


BS 3424-16:1995 Testing coated fabrics -- Method 18. Determination of air permeability


BS 3424-17:1987 Testing coated fabrics -- Method 20. Method for determination of dimensional stability to water immersion


BS 3424-18:1986 Testing coated fabrics -- Methods 21A and 21B. Methods for determination of resistance to wicking and lateral leakage


BS 3424-19:1989 Testing coated fabrics -- Methods 22A, 22B and 22C. Determination of sulphur staining


BS 3424-20:1987 Testing coated fabrics -- Method 23. Method for determination of dimensional changes on mechanical relaxation at zero tension



of 86

January 2021


BS 3424-21:1993 Testing coated fabrics -- Method 24.

Method for determination of elongation and tension set


BS 3424-22:1983 Testing coated fabrics -- Method 25. Methods for determination of fusion of PVC coatings and the state of cure of vulcanized rubber coatings


BS 3424-25:1993 Testing coated fabrics -- Method 28. Method for determination of the coating thickness and thickness of any expanded layer


BS 3424-26:1990 Testing coated fabrics -- Methods 29A, 29B, 29C and 29D. Methods for determination of resistance to water penetration and surface wetting


BS 3424-28:1995 Testing coated fabrics -- Method 31. Determination of specular gloss


BS 3424-31:1990 Testing coated fabrics -- Method 34. Method for determination of resistance to scuffing and snagging


BS 3424-34:1992 Testing coated fabrics -- Method 37. Method for determination of water vapour permeability index (WVPI)


BS 3424-36:1993 Testing coated fabrics -- Method 39. Method for determination of the dimensional stability of coated fabrics to domestic washing


BS 3424-38:1998 Testing coated fabrics -- Determination of wounded burst strength


BS 3445-1:1992 Agricultural water troughs and water fittings -- Specification for water trough bodies, service boxes and water supply system


BS 3445-2:1992 Agricultural water troughs and water fittings -- Code of practice for installation and operation


BS 3446-1:1990 Glossary of terms associated with refractory materials -- General and manufacturing


BS 3446-2:1990 Glossary of terms associated with refractory materials -- Applications in the coke, glass, cement and other non-metallurgical industries


BS 3446-3:1990 Glossary of terms associated with refractory materials -- Applications in the metallurgical industries


BS 3488:1987 Specification for technical anhydrous lanolin AW/307 current Review closed

BS 3506:1969 Specification for unplasticized PVC pipe for industrial uses


BS 3521-2:1991 Terms relating to ophthalmic lenses and spectacle frames -- Glossary of terms relating to spectacle frames


BS 3531-14.2:1990 Implants for osteosynthesis. Intramedullary

nailing systems -- Specification for medullary pins (Rush type) and introducer/extractors

CH/150/5 current Review closed

BS 3531-6.1:1990 Implants for osteosynthesis. Skeletal pins and wires -- Specification for general requirements


BS 3539:1986 Specification for sound level meters for the measurement of noise emitted by motor vehicles


BS 3546:2001 Coated fabrics for use in the manufacture of water penetration resistant clothing


BS 3551:1962 Specification for alloy steel shackles MHE/1 current Review closed


of 86

January 2021


BS 3553:1992 Specification for graphical symbols for coal

preparation plant flowsheets


BS 3555:1988 Specification for ring wrenches MTE/15 confirmed (2016) Reconfirmation

BS 3566:1982 Specification for lightweight salvage sheets for fire service use


BS 3567:1985 Code of practice for preparation of flowsheets for the design of coal preparation plant


BS 3568:1988 Method for determination of solubility of wool in alkali


BS 3591:1985 Specification for industrial methylated spirits


BS 3594-1:1963 Specification for pipe wrenches -- Stillson type wrenches


BS 3594-2:1965 Specification for pipe wrenches -- Footprint type wrenches


BS 3597:1984 Specification for electroplated coatings of 65/35 tin/nickel alloy


BS 3604-2:1991 Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. -- Specification for longitudinally arc welded tubes


BS 3618-1:1969 Glossary of mining terms -- Planning and surveying


BS 3618-10:1967 Glossary of mining terms -- Transport MRE/1 confirmed (2016) Reconfirmation

BS 3618-11:1967 Glossary of mining terms -- Strata control MRE/1 confirmed (2016) Reconfirmation

BS 3618-2:1971 Glossary of mining terms -- Ventilation MRE/1 confirmed (2016) Reconfirmation

BS 3618-3:1971 Glossary of mining terms -- Boring and exploration


BS 3618-4:1971 Glossary of mining terms -- Drainage MRE/1 confirmed (2016) Reconfirmation

BS 3618-5:1971 Glossary of mining terms -- Geology MRE/1 confirmed (2016) Reconfirmation

BS 3618-6:1972 Glossary of mining terms -- Drilling and blasting


BS 3618-7:1973 Glossary of mining terms -- Electrical engineering and lighting


BS 3618-8:1974 Glossary of mining terms -- Winning and working


BS 3618-9:1974 Glossary of mining terms -- Shafts and associated equipment


BS 3623:1981 Specification for woodworkers' metal-bodied planes


BS 3641-1:1971 Symbols for machine tools -- General symbols


BS 3641-2:1980 Symbols for machine tools -- Specification for numerical control symbols


BS 3641-3:1973 Specification for symbols for machine tools. -- Additional general symbols


BS 3655:1981+A1:2009 Recommendations for informative labelling of textile floor coverings


BS 3666:1982 Specification for size designation of women's wear

TCI/66/-/3 current Review closed

BS 3674:1981 Specification for sodium carbonate (technical grades)


BS 3680-10C:1996 Measurement of liquid flow in open channels. Sediment transport -- Guide to methods of sampling of sand-bed and cohesive-bed materials

CPI/113 current Review closed

BS 3693:1992 Recommendations for design of scales and indexes on analogue indicating instruments



of 86

January 2021


BS 3712-1:1991 Building and construction sealants --

Methods of test for homogeneity, relative density and penetration


BS 3712-2:1973 Building and construction sealants -- Methods of test for seepage, staining, shrinkage, shelf life and paintability


BS 3712-3:1974 Building and construction sealants -- Methods of test for application life, skinning properties and tack-free time


BS 3712-4:1991 Building and construction sealants -- Method of test for adhesion in peel


BS 3730-2:1982 Assessment of departures from roundness -- Specification for characteristics of stylus instruments for measuring variations in radius (including guidance on use and calibration)


BS 3733:1974 Specification for endless V-belt drives for agricultural purposes


BS 3745:1970 Method for the evaluation of results of accelerated corrosion tests on metallic coatings


BS 3749:1991 Specification for E glass fibre woven roving fabrics for the reinforcement of polyester and epoxy resins systems


BS 3757:1978 Specification for rigid PVC sheet PRI/75 confirmed (2016) Reconfirmation

BS 3761:1995 Specification for solvent-based paint remover


BS 3762-2:1989 Analysis of formulated detergents -- Qualitative test methods


BS 3762-3.10:1989 Analysis of formulated detergents -- Methods for determination of short-chain alkylbenzenesulphonates content


BS 3762-3.11:1989 Analysis of formulated detergents -- Method for determination of free formaldehyde content


BS 3762-3.12:1985 Analysis of formulated detergents -- Method for determination of ammonia content


BS 3762-3.14:1985 Analysis of formulated detergents -- Method for determination of carbonate content


BS 3762-3.15:1985 Analysis of formulated detergents -- Method for estimation of carboxymethylcellulose content


BS 3762-3.16:1985 Analysis of formulated detergents -- Method for determination of chloride content


BS 3762-3.24:1988 Analysis of formulated detergents -- Method for determination of low molecular mass alcohols content


BS 3762-3.25:1989 Analysis of formulated detergents -- Methods for determination of water and volatile matter content


BS 3762-3.9:1986 Analysis of formulated detergents -- Method for determination of soap content

CII/34 current Review closed

BS 3762-4.1:1989 Analysis of formulated detergents -- Method for determination of clear point of liquid detergents


BS 3766:1979 Specification for coolant pumps for machine tools


BS 3788:1984 Specification for tin coated finish on culinary utensils

CW/9 confirmed (2016) Reconfirmation


of 86

January 2021


BS 3790:2006 Specification for belt drives. Endless wedge

belts, endless V-belts, banded wedge belts, banded V-belts and their corresponding pulleys


BS 3818:1964 Specification for self-sealing fuelling couplings for diesel locomotives and diesel railcars

RAE/1 current Review closed

BS 381C:1996 Specification for colours for identification, coding and special purposes


BS 3821-1:1974 Specification for hardmetal dies and associated hardmetal tools -- Designation and marking of as-sintered pellets and finished dies


BS 3821-2:1974 Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round wire


BS 3821-3:1974 Specification for hardmetal dies and associated hardmetal tools -- As-sintered pellets and finished dies for drawing round bar


BS 3823:1990 Grading of ash and hickory wood handles for hand tools


BS 3876-1:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage -- Specification for parallel barrel rollers, mountings and assemblies


BS 3876-2:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage -- Specification for vertical spindle pulleys, mountings and assemblies


BS 3876-5:1990 Rope rollers, pulleys, mountings and assemblies for colliery track haulage -- Specification for suspended pulley assemblies and clamps


BS 3878:1982 Specification for flexible PVC sheeting for hospital use


BS 388:1972 Specification for aluminium pigments STI/1 confirmed (2016) Reconfirmation

BS 3884-1:1974 Modular units for machine tools -- Specification for basic units


BS 3900-F6:1976 Methods of test for paint. Durability tests on paint films -- Notes for guidance on the conduct of natural weathering test


BS 3903:1977 Methods of test for sulphuric acid, oleum and liquid sulphur trioxide


BS 3905:1995 Specification for 3.8/6.6 kV, 300 A bolted flameproof cable couplers and adaptors, for use in coal mines.


BS 3907-1:1965 Methods for the analysis of magnesium and magnesium alloys -- Determination of aluminium in magnesium alloys (gravimetric method)


BS 3907-10:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and/or silver (photometric method)


BS 3907-11:1970 Methods for the analysis of magnesium and magnesium alloys -- Determination of silicon in magnesium and magnesium alloys (photometric method)



of 86

January 2021


BS 3907-12:1971 Methods for the analysis of magnesium and

magnesium alloys -- Determination of aluminium in magnesium and magnesium alloys (photometric method)


BS 3907-13:1972 Methods for the analysis of magnesium and magnesium alloys -- Determination of tin in magnesium and magnesium alloys (photometric method)


BS 3907-15:1976 Methods for the analysis of magnesium and magnesium alloys -- Determination of lead in magnesium and magnesium alloys (atomic absorption method)


BS 3907-2:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of iron in magnesium and magnesium alloys (photometric - 1:10-phenanthroline method)


BS 3907-3:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of copper in magnesium and magnesium alloys (photometric method)


BS 3907-4:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of manganese in magnesium and magnesium alloys (photometric-periodate method)


BS 3907-5:1966 Methods for the analysis of magnesium and magnesium alloys -- Determination of manganese in magnesium and magnesium alloys (photometric-periodate method) (low contents)


BS 3907-6:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of zirconium in magnesium and magnesium alloys (photometric method)


BS 3907-7:1969 Methods for the analysis of magnesium and

magnesium alloys -- Determination of nickel in magnesium alloys (photometric method)


BS 3907-8:1970 Methods for the analysis of magnesium and magnesium alloys -- Determination of total rare earths in magnesium alloys (gravimetric method)


BS 3907-9:1969 Methods for the analysis of magnesium and magnesium alloys -- Determination of zinc in magnesium alloys (ion-exchange-volumetric EDTA method)


BS 3919:1987 Specification for technical tallow and animal grease

AW/307 current Review closed

BS 3928:1969 Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors)

MCE/21 current Confirmation

BS 3935:1991 Guide to classification and marking of cattle hides and calfskins


BS 3936-10:1990 Nursery stock -- Specification for ground cover plants


BS 3936-2:1990 Nursery stock -- Specification for roses AW/1 confirmed (2016) Reconfirmation

BS 3936-3:1990 Nursery stock -- Specification for fruit plants


BS 3936-7:1989 Nursery stock -- Specification for bedding plants


BS 3936-9:1998 Nursery stock -- Specification for bulbs, corms and tubers



of 86

January 2021


BS 3944-1:1992 Colour and diffusion filter material for

theatre, television and similar entertainment purposes. -- Specification for flammability and dimensional stability

CPW/4 confirmed (2016) Reconfirmation

BS 3947:1976 Specification for liquid chlorine CII/26 confirmed (2016) Reconfirmation

BS 3962-1:1980 Methods of test for finishes for wooden furniture. -- Assessment of low angle glare by measurement of specular gloss at 85$0D

FW/0/1 current Confirmation

BS 3962-6:1980 Methods of test for finishes for wooden furniture -- Assessment of resistance to mechanical damage

FW/0/1 partially replaced by BS EN 15186:2012

Review closed

BS 3970-1:1990 Sterilizing and disinfecting equipment for medical products -- Specification for general requirements

CH/198 partially replaced by BS EN 285:1997, BS EN 1422:1997+A1:2009 and BS EN 61010-2-043:1998

Review closed

BS 3970-2:1991 Sterilizing and disinfecting equipment for

medical products -- Specification for steam sterilizers for aqueous fluids in sealed rigid containers

CH/198 confirmed (2016) Review closed

BS 3984:1982 Specification for sodium silicates CII/26 confirmed (2016) Reconfirmation

BS 3986-1:1998 Methods of test for drying performance of agricultural grain dryers -- General procedures and limited requirements for wheat


BS 3986-2:1998 Methods of test for drying performance of agricultural grain dryers -- Additional procedures and crop specific requirements


BS 3993:1966 Specification for hydrochloric acid, commercial types 1 and 2


BS 3996:1978 Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)

LBI/1/2 current Review closed

BS 3A 117:1962+A2:2016

Aerospace Series. Bolts, Pan Head, Slotted Drive, Unified Threads, Corrosion Resisting Steel, Strength Class 880 MPa, for Aircraft. Specification


BS 3B 25:2009 Specification for copper-nickel-silicon alloy rods, bars, sections, forging stock and forgings (heat treated)


BS 3B 26:2009 Specification for copper-nickel-silicon alloy rods, bars and sections (solution treated, cold worked and precipitation treated)


BS 3B 27:2009 Specification for copper-zinc-aluminium-nickel-silicon alloy tube


BS 3B 28:2009 Specification for copper-beryllium alloy strip and foil (solution treated and precipitation treated)


BS 3B 29:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: quarter hard and precipitation treated)


BS 3B 30:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: half hard and precipitation treated)


BS 3B 31:2009 Specification for copper-beryllium alloy strip and foil (solution treated, cold rolled: full hard and precipitation treated)


BS 3B 32:2009 Specification for copper-beryllium alloy rods, bars and sections (solution treated and precipitation treated)



of 86

January 2021


BS 3B 33:2009 Specification for copper-beryllium alloy

wire(solution treated and precipitation treated)


BS 3F 121:1995 Specification for metallic slide fasteners for aerospace purposes


BS 3F 129:2003 Woven polyester narrow fabrics for aerospace purposes


BS 3G 100-2.2:1972 Specification for general requirements for equipment for use in aircraft. All equipment -- Magnetic influence


BS 3G 100-2.3.0:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Standard test requirements


BS 3G 100-2.3.1:1969 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Vibration


BS 3G 100-2.3.10:1974 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Impact icing


BS 3G 100-2.3.11:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Water-proofness


BS 3G 100-2.3.12:1991 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Fluid contamination


BS 3G 100-2.3.13:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Resistance to fire in designated fire zones


BS 3G 100-2.3.14:1973 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Acoustic vibration


BS 3G 100-2.3.2:1970 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Temperature-pressure requirements


BS 3G 100-2.3.3:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Mould growth


BS 3G 100-2.3.4:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Differential pressure requirements


BS 3G 100-2.3.5:1972 Specification for general requirements for equipment for use in aircraft. All

equipment. Environmental conditions -- Explosion-proofness


BS 3G 100-2.3.6:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Acceleration requirements


BS 3G 100-2.3.7:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Tropical exposure



of 86

January 2021


BS 3G 100-2.3.8:1972 Specification for general requirements for

equipment for use in aircraft. All equipment. Environmental conditions -- Salt mist


BS 3G 100-2.3.9:1972 Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions -- Ice formation


BS 3G 101:1987 Specification for general requirements for mechanical and electromechanical aircraft indicators


BS 3G 148:1981 Specification for general purpose platinum temperature sensors for aircraft


BS 3G 231:1997 Specification for conductors for general-purpose aircraft electrical cables and aerospace applications


BS 3HR 1:2010+A1:2016 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)


BS 3HR 201:2009 Specification for nickel-chromium- titanium-aluminium heat-resisting alloy plate, sheet and strip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)


BS 3HR 202:2009 Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheet and strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


BS 3HR 401:2011 Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)


BS 3HR 501:2011 Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


BS 3HR 502:2011 Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)


BS 3HR 503:2011 Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy wire for thread inserts (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5) (0.45 mm to 2 mm diameter)


BS 3HR 504:2011 Specification for nickel-chromium-titanium heat-resisting alloy bar and wire for rivets and rivets (Maximum diameter or minor sectional dimension 20 mm) (Nickel base, Cr 19.5, Ti 0.4)


BS 3J 12:1991 Specification for pressure-sensitive adhesive identification tape


BS 3L 122:1970 Specification for ingots and castings of magnesium-8% aluminium-zinc-manganese alloy (solution treated) (Al 8, Zn 0.5, Mn 0.3)


BS 3L 63:1971 Specification for tube of aluminium-copper-mangesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)

ACE/61/-/24 confirmed (2016) Confirmation

BS 3S 132:1976 Specification. 3% chromium-molybdenum-vanadium steel billets, bars, forgings and parts (1320-1470 MPa: limiting ruling section 70 mm) (suitable for nitriding)



of 86

January 2021


BS 3S 98:2014 Specification for 2.5% nickel-chromium-

molybdenum (high carbon) steel billets, bars, forging and parts (1 160 - 1 310 MPa: limiting ruling section 155 mm)


BS 3TA 1:2009 Specification for sheet and strip of commercially pure titanium (tensile strength 290-420 MPa)


BS 3TA 10:2009 Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)


BS 3TA 100:2009 Procedure for inspection, testing and acceptance of wrought titanium and titanium alloys




BS 3TA 21:2009 Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)




BS 3TA 7:2009 Specification for bar and section for machining of commercially pure titanium (tensile strength 540-740 MPa)


BS 4006:1992 Specification for hand operated square drive socket wrenches and accessories


BS 4008:2006 Specification for cattle grids B/201 current Review closed

BS 4023:1975 Specification for flexible cellular PVC sheeting


BS 4034:1990 Specification for vitrified hotelware CW/29 confirmed (2016) Reconfirmation

BS 4048:Parts 1 and 2:1966

Specification for combined wire and fibre ropes -- Combined ropes. Spring lay ropes


BS 4060:2006 Pressed wool felts. Specification TCI/24 current Confirmation

BS 4073:1966 Specification for heavy rolling stock for

mineral haulage in mines


BS 4082-1:1969 Specification for external dimensions for vertical in-line centrifugal pumps -- 'I' Type


BS 4082-2:1969 Specification for external dimensions for vertical in-line centrifugal pumps -- 'U' Type


BS 4087:1989 Specification for copper-covered steel wire for telephone and telegraph purposes


BS 4094-1:1966 Recommendation for data on shielding from ionizing radiation -- Shielding from gamma radiation

NCE/2 current Confirmation

BS 4094-2:1971 Recommendation for data on shielding from ionizing radiation -- Shielding from X-radiation

NCE/2 confirmed (2016) Reconfirmation

BS 4098:1975 Method for the determination of thickness, compression and recovery characteristics of textile floor coverings


BS 4102:1998 Specification for steel wire for general

fencing purposes


BS 4105:1990 Specification for liquid carbon dioxide, industrial


BS 4115:1993 Specification for compression knapsack sprayers


BS 4116-4:1992 Conveyor chains, their attachments and associated chain wheels. -- Specification for chains and attachments (British series)


BS 4130:1984 Specification for sodium hydroxide (technical grades)


BS 4134:1990 Method for designation of ticket numbers of industrial sewing threads



of 86

January 2021


BS 4140-0:1986 Methods of test for aluminium oxide --

General introduction


BS 416-1:1990 Discharge and ventilating pipes and fittings, sand-cast or spun in cast iron -- Specification for spigot and socket systems


BS 4185-10:1977 Machine tool components -- Trapezoidal threads for lead and feed screw assemblies


BS 4185-11:1983 Machine tool components -- Recommendations for accuracy grades of gears


BS 419:1966 Specification for varnished fabrics and tapes for electrical purposes

GEL/15/7 current Review closed

BS 4207:1989 Code of practice for the installation of monolithic linings for steel chimneys and flues


BS 4213:2004 Cisterns for domestic use. Cold water storage and combined feed and expansion (thermoplastic) cisterns up to 500 l.

Specification


BS 4215-15:1990 Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for insulated pins for use in electrode back-ups

WEE/29 current Review closed

BS 4215-2:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for straight resistance spot welding electrodes


BS 4215-6:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for electrode adaptors, female taper 1:10

WEE/29 current Confirmation

BS 4215-7:1987 Resistance spot welding electrodes, electrode holders and ancillary equipment -- Specification for male electrode caps


BS 4235-1:1972 Specification for metric keys and keyways -- Parallel and taper keys


BS 4249:1989 Specification for paper and cork/paper jointing


BS 4250:2014 Specification for commercial butane and commercial propane


BS 4258-2:1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of iron content


BS 4258-3:1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Methods of test for phosphoric acid (orthophosphoric acid) for industrial use. Determination of sulphate content


BS 4258-4:1975 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of fluorine content


BS 4258-5:1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of silica content


BS 4258-7:1978 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of total phosphorus (V) oxide content: quinoline phosphomolybdate gravimetric method

CII/37 current Confirmation

BS 4258-9:1989 Methods of test for phosphoric acid (orthophosphoric acid) for industrial use -- Determination of chloride content


BS 426:1969 Specification for fixed centres for use on machine tools and in other applications



of 86

January 2021


BS 4264:1987 Specification for envelopes for commercial,

official and professional use

PAI/11 confirmed (2016) Reconfirmation

BS 4267-1:1988 Ammonium nitrate -- Method for determination of ammoniacal nitrogen content


BS 4267-2:1988 Ammonium nitrate -- Method for determination of total nitrogen content


BS 4267-9:1987 Ammonium nitrate -- Method for determination of sulphate content


BS 4274-1:2003 Visual acuity test types -- Test charts for clinical determination of distance visual acuity. Specification

CH/172/6 confirmed (2016) Reconfirmation

BS 4285-2.5:1989 Microbiological examination for dairy purposes. Methods of general application for enumeration of microorganisms -- Enumeration of bacteria by direct microscopic counts


BS 4285-3.11:1985 Microbiological examination for dairy

purposes. Methods for detection and/or enumeration of specific groups of microorganisms -- Detection and enumeration of faecal streptococci


BS 4285-3.2:1991 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms -- Enumeration of thermoduric bacteria


BS 4285-3.4.2:1989 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Enumeration of lipolytic microorganisms -- Tributyrin agar method


BS 4285-3.5:1988 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms -- Enumeration of proteolytic microorganisms


BS 4285-3.9.2:1992 Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Detection of Salmonella -- Screening method using electrical conductance


BS 4285-4:1991 Microbiological examination for dairy purposes -- Methods for assessment of hygienic conditions


BS 4285-5.3:1987 Microbiological examination for dairy purposes. Ancillary methods -- Test for inhibitory substances


BS 4289-5:1989 Method for the analysis of oilseeds -- Determination of acidity of fat


BS 4290:1989 Method for specifying electroplated

coatings of silver and silver alloys for decorative and protective purposes


BS 4292-2:1989 Method for specifying electroplated coatings of gold and gold alloys -- Gold and gold alloys for decorative and protective purposes


BS 4301:1991 Recommendations for preparation of drawings for optical elements and systems

CPW/172 confirmed (2016) Withdrawal

BS 4309:1968 Methods of measuring the performance of laboratory electric resistance furnaces


BS 4311-1:2007 Gauge blocks manufactured to imperial specification -- Specification and validation



of 86

January 2021


BS 4317-18:1988 Methods of test for cereals and pulses --

Determination of hidden insect infestation


BS 4317-19:1990 Methods of test for cereals and pulses -- Determination of protein quality of wheat by the sodium dodecyl sulphate (SDS) test


BS 4317-20:1999 Methods of test for cereals and pulses -- Determination of water absorption of flour and rheological properties of doughs using a farinograph


BS 4317-21:1999 Methods of test for cereals and pulses -- Determination of rheological properties of doughs using an extensograph


BS 4319-1:1968 Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) -- Essential conditions for measuring equivalent input and output admittances


BS 4320:1968 Specification for metal washers for general engineering purposes. Metric series

FME/9 current Review closed

BS 4325-1:1978 Methods for analysis of oilseed residues -- Determination of moisture and volatile matter content


BS 4325-5:1978 Methods for analysis of oilseed residues -- Determination of diethyl ether extract


BS 4341:1968 Methods of test for formic acid CII/26 confirmed (2016) Reconfirmation

BS 434-1:2011+A1:2016 Bitumen road emulsions -- Specification for anionic bitumen road emulsions



Methods of test for formic acid CII/26 confirmed (2016) Reconfirmation

BS 4361-1:1968 Woodworking machines -- Components MTE/23 current Review closed

BS 4364:1993 Specification for industrial oxygen CII/26 confirmed (2016) Reconfirmation

BS 4366:1993 Specification for industrial nitrogen CII/26 confirmed (2016) Reconfirmation

BS 4367:1968 Methods of test for nitric acid CII/37 current Review closed

BS 4368-1:1998+A1:2014

Metallic tube connectors for fluid power and general use -- Split collet compression fittings

MCE/18/-/4 current Review closed

BS 4371:1991 Specification for fibrous gland packings PSE/15 confirmed (2016) Reconfirmation

BS 4393:1991 Specification for solderable tin or tin-lead coated wires for component terminations


BS 4401-4:1970 Methods of test for meat and meat products -- Determination of total fat content


BS 4401-7:1976 Methods of test for meat and meat products -- Determination of nitrate content


BS 4401-8:1976 Methods of test for meat and meat products -- Determination of nitrite content


BS 4405:1990 Specification for liquid soap CII/34 confirmed (2016) Reconfirmation

BS 4406:1969 Specification for the designation in the Tex system of netting yarns for fishing nets


BS 4411:1969 Specification for woodcutting bandsaw

blades

E/- proposed for

withdrawal (2019)

Withdrawal

BS 4422:2005 Fire. Vocabulary FSH/9 confirmed (2016) Reconfirmation

BS 4427-1:1969 Methods of test for sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Determination of matter insoluble in water in sodium tripolyphosphate



of 86

January 2021


BS 4427-11:1983 Methods of test for sodium

tripolyphosphate and sodium pyrophosphate for industrial use -- Separation by column chromatography and determination of the different phosphate forms


BS 4427-14:1989 Methods of test for sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Condensed phosphates for industrial use (including foodstuffs): determination of chloride content


BS 4427-2:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Measurement of pH value of sodium tripolyphosphate


BS 4427-3:1989 Methods of test for sodium tripolyphosphate and sodium pyrophosphate for industrial use -- Condensed phosphates for industrial use (including foodstuffs): determination of iron content


BS 4427-4:1969 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Determination of loss on ignition


BS 4427-5:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Determination of particle size distribution


BS 4427-6:1974 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use -- Estimation of pyrophosphate content of sodium pyrophosphate


BS 4428:1989 Code of practice for general landscape operations (excluding hard surfaces)


BS 4431:1989 Methods of sampling and test for liquefied anhydrous ammonia


BS 4442-1:1969 Specification for lathe spindle noses and faceplates. -- Types 'A' and 'Camlock'


BS 4449:2005+A3:2016 Steel for the reinforcement of concrete. Weldable reinforcing steel. Bar, coil and decoiled product. Specification

ISE/104 current Revision

BS 4478:1969 Methods of measurement of intermodulation products in electronic tubes or valves intended for use in colour

television transposers


BS 4481-2:1983 Bonded abrasive products -- Specification for dimensions of grinding wheels and segments


BS 448-2:1981 Dimensions of electronic tubes and valves -- Specification for dimensions of United Kingdom electronic tubes


BS 4485-2:1988 Water cooling towers -- Methods for performance testing


BS 4485-3:1988 Water cooling towers -- Code of practice for thermal and functional design



of 86

January 2021


BS 4485-4:1996 Water cooling towers -- Code of practice for

structural design and construction


BS 4486:1980 Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete


BS 4493:1969 Specification for copper salts for electroplating


BS 4495:1969 Recommendations for the flame spraying of ceramic and cermet coatings


BS 4497:1969 Recommendations for the detection and estimation of nitrogenous treating agents in paper


BS 4500:2009 Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm

TPR/1/10 current Confirmation

BS 4506:1970 Specification for shaft ends MCE/5 current Review closed

BS 4513:1969 Specification for lead bricks for radiation shielding


BS 4518:1982+A2:2014 Specification for metric dimensions of toroidal sealing rings ('O'-rings) and their housings


BS 4542:1970 Method for determination of loss tangent and permittivity of electrical insulating materials in sheet form (Lynch method)

GEL/15 current Review closed

BS 4550-3.8:1978 Methods of testing cement. Physical tests -- Test for heat of hydration


BS 4573:1970+A5:2016 Specification for 2-pin reversible plugs and shaver socket-outlets


BS 4574:1970 Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink


BS 4582-1:1970 Specification for fine pitch gears (metric module) -- Involute spur and helical gears


BS 4582-2:1978 Specification for fine pitch gears (metric module) -- Hobs and cutters


BS 4583:1991 Methods of test for higher alcohols for industrial use


BS 4585-18:1996 Methods of test for spices and condiments -- Determination of total capsaicinoid content of chillies and chilli oleoresins (high-performance liquid chromatographic method)


BS 4585-2:1982 Methods of test for spices and condiments -- Determination of moisture content (entrainment method)


BS 4585-6:1992 Methods of test for spices and condiments -- Determination of non-volatile ether extract


BS 4585-7:1989 Methods of test for spices and condiments -- Determination of Scoville index of chillies


BS 459:1988 Specification for matchboarded wooden door leaves for external use


BS 4592-1:2006 Industrial type flooring and stair treads -- Metal open bar gratings. Specification


BS 4592-2:2006 Industrial type flooring and stair treads -- Expanded metal gratings. Specification


BS 4592-4:2006 Industrial type flooring and stair treads -- Glass reinforced plastics (GRP) open bar gratings. Specification


BS 4592-5:2006 Industrial type flooring and stair treads -- Solid plates in metal and glass reinforced plastics (GRP). Specification



of 86

January 2021


BS 463-1:1958 Specification for sockets for wire ropes --

Inch units


BS 463-2:1970 Specification for sockets for wire ropes -- Metric units


BS 4637:1970 Specification for carbon steel wire for coiled springs (bedding and seating)


BS 4638:1970 Specification for carbon steel wire for zigzag and square-form springs


BS 4639:1987 Specification for brakes and braking systems for towed agricultural vehicles


BS 4656-1:1981 Accuracy of machine tools and methods of test -- Specification for lathes, general purpose type

MTE/1/2 current Review closed

BS 4656-10:1975 Specification for the accuracy of machine tools and methods of test -- Drilling machines, radial type


BS 4656-11:1974 Accuracy of machine tools and methods of test -- Drilling machines, vertical floor

mounted column and pillar types


BS 4656-12:1979 Specification for the accuracy of machine tools and methods of test -- Dividing heads


BS 4656-15:1976 Accuracy of machine tools and methods of test -- Drilling machines, turret and single spindle co-ordinate types


BS 4656-18:1981 Accuracy of machine tools and methods of test -- Specification for broaching machines, horizontal internal type


BS 4656-2:1988 Accuracy of machine tools and methods of test -- Specification for copying lathes and copying attachments


BS 4656-26:1980 Accuracy of machine tools and methods of test -- Gear shaping machines


BS 4656-28:1988 Accuracy of machine tools and methods of test -- Specification for numerically controlled turning machines up to and

including 1500 mm turning diameter


BS 4656-3:1971 Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal or vertical spindle plain


BS 4656-38:1995 Accuracy of machine tools and methods of test -- Specification for surface finish of test pieces


BS 4656-4:1971 Specification for the accuracy of machine tools and methods of test -- Milling machines, bed type, horizontal or vertical spindle


BS 4656-5:1979 Specification for the accuracy of machine tools and methods of tests -- Milling machines, knee and column type, horizontal spindle, universal


BS 4656-9:1974 Accuracy of machine tools and methods of

test -- External cylindrical grinding machines with reciprocating table

MTE/1/2 confirmed (2016) Reconfirmation

BS 4674:1971 Methods for the determination of the breaking load and knot breaking load of netting yarns for fishing nets


BS 4677:1984 Specification for arc welding of austenitic stainless steel pipework for carrying fluids


BS 4682-2:1988 Methods of test for dimensional stability of textile floor coverings -- Determination of dimensional changes due to changes in ambient humidity



of 86

January 2021


BS 4727-2:Group

02:1983

Glossary of electrotechnical, power,

telecommunication, electronics, lighting and colour terms. Terms particular to power engineering -- Power electronics terminology


BS 4727-2:Group 12:1990

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering -- Telecontrol terminology

GEL/1 confirmed (2016) Reconfirmation

BS 4727-3:Group 07:1971

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics -- Radiocommunication terminology


BS 4727-5:Group 01:1985

Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment -- Radiology and radiological physics terminology


BS 4729:2005+A1:2016 Clay bricks of special shapes and sizes. Recommendations


BS 4737-3.0:1988 Intruder alarm systems. Specifications for components -- General requirements

GW/1 current Review closed

BS 4737-3.1:1977 Intruder alarm systems. Specifications for components -- Continuous wiring


BS 4737-3.10:1978 Intruder alarm systems. Specifications for components -- Vibration detectors


BS 4737-3.12:1978 Intruder alarm systems. Specifications for components -- Beam interruption detectors


BS 4737-3.13:1978 Intruder alarm systems. Specifications for components -- Capacitive proximity detectors


BS 4737-3.14:1986 Intruder alarm systems. Specifications for components -- Specification for deliberately-operated devices


BS 4737-3.2:1977 Intruder alarm systems. Specifications for components -- Foil on glass


BS 4737-3.3:1977 Intruder alarm systems. Specifications for components -- Protective switches


BS 4737-3.5:1978 Intruder alarm systems. Specifications for components -- Ultrasonic movement detectors


BS 4737-3.6:1978 Intruder alarm systems. Specifications for components -- Acoustic detectors


BS 4737-3.8:1978 Intruder alarm systems. Specifications for components -- Volumetric capacitive detectors


BS 4737-3.9:1978 Intruder alarm systems. Specifications for components -- Pressure mats


BS 4737-4.3:1988 Intruder alarm systems in buildings. Codes of practice -- Code of practice for exterior alarm systems


BS 4737-5.2:1988 Intruder alarm systems. Terms and symbols -- Recommendations for symbols for diagrams


BS 4742-6:1988 Hydraulic equipment for agricultural machinery -- Specification for dimensions and location of agricultural tractor hydraulic return to sump porting


BS 4742-7:1989 Hydraulic equipment for agricultural machinery -- Specification for port connections for agricultural trailed vehicle hydraulic brake couplings



of 86

January 2021


BS 4742-8:1990 Hydraulic equipment for agricultural

machinery -- Method for colour coding of remote hydraulic power services and controls on agricultural tractors


BS 4745:2005 Determination of the thermal resistance of textiles. Two-plate method: fixed pressure procedure, two-plate plate method: fixed opening procedure, and single-plate method


BS 476-10:2009 Fire tests on building materials and structures -- Guide to the principles, selection, role and application of fire testing and their outputs


BS 476-21:1987 Fire tests on building materials and structures -- Methods for determination of the fire resistance of loadbearing elements of construction

FSH/22 confirmed (2016) Reconfirmation

BS 476-23:1987 Fire tests on building materials and structures -- Methods for determination of the contribution of components to the fire resistance of a structure


BS 4763:1971 Methods for cutting knotted netting to shape (tapering)


BS 476-31.1:1983 Fire tests on building materials and structures -- Method of measurement under ambient temperature conditions


BS 476-7:1997 Fire tests on building materials and structures -- Method of test to determine the classification of the surface spread of flame of products


BS 4774:1972 Methods of test for chloroform for industrial use


BS 4779:1971 Recommendations for measurement of the optical transfer function of optical devices

CPW/172 current Withdrawal

BS 4783-8:1994 Storage, transportation and maintenance of media for use in data processing and information storage -- Recommendations for 4 mm and 8 mm helical scan tape cartridges

ICT/1 confirmed (2016) Reconfirmation

BS 4789:1972 Specification for ceramic components for use in envelopes for electronic tubes


BS 4790:1987 Method for determination of the effects of a small source of ignition on textile floor coverings (hot metal nut method)


BS 4793:1972 Recommendations for specifying the optical performance of lenses for television cameras


BS 4800:2011 Schedule of paint colours for building purposes


BS 4800F:2011 BS 4800 Colour matching fan STI/14 confirmed (2016) Reconfirmation

BS 4816:1972 Method for the determination of the puncture resistance of board


BS 4818:1993 Method for determination of the creasing quality of carton board (Pira method)


BS 4825-2:1991+A2:2009

Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for bends and tees


BS 4825-3:1991+A2:2009

Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for clamp type couplings



of 86

January 2021


BS 4825-

4:1991+A1:2009

Stainless steel tubes and fittings for the

food industry and other hygienic applications -- Specification for threaded (IDF type) coupling


BS 4825-5:1991+A1:2009

Stainless steel tubes and fittings for the food industry and other hygienic applications -- Specification for recessed ring joint type couplings


BS 4827:1972 Specification for ISO miniature screw threads. Metric series

FME/9 current Review closed

BS 4835:1973 Methods of test for plasticizer esters CII/26 confirmed (2016) Reconfirmation

BS 4841-1:2006 Rigid polyisocyanurate (PIR) and polyurethane (PUR) products for building end-use applications -- Specification for laminated insulation boards with auto-adhesively or separately bonded facings

PRI/72/4 current Confirmation

BS 4841-2:2006 Rigid PIR and PUR products for building end-use applications -- Specification for

laminated boards with auto-adhesively bonded facings for use as thermal insulation for internal wall linings and ceilings

PRI/72/4 confirmed (2016) Reconfirmation

BS 4841-3:2006 Rigid polyisocyanurate PIR and PUR products for building end-use applications -- Specification for roofboards with facings for use as roofboard thermal insulation under built up bituminous roofing membranes


BS 4841-4:2006 Rigid PUR and PIR products for building end-use applications -- Specification for laminated insulation boards ... for use as roofboard thermal insulation under non-bituminous single-ply roofing membranes


BS 4841-5:2006 Rigid PIR and PUR products for building end-use applications -- Specification for roofboards with auto-adhesively or separately bonded facings for use as thermal insulation boards for pitched roofs


BS 4841-6:2006 Rigid PIR and PUR products for building end-use applications -- Specification for laminated boards with auto-adhesively or separately bonded facings for use as thermal insulation for floors


BS 4854:1972 Specification for cars for manriding in mines MRE/1 confirmed (2016) Reconfirmation

BS 4873:2016 Aluminium alloy windows and doorsets. Specification


BS 4875-7:2006 Strength and stability of furniture -- Domestic and contract storage furniture. Performance requirements

FW/0/2 confirmed (2016) Reconfirmation

BS 4877:2016 Nuclear reactor instrumentation and control. Code of practice

NCE/8 current Confirmation

BS 4878:1973 Specification for large (vee-throated)

haulage rope pulleys for mines and quarries


BS 4881:1993 Specification for polypropylene film cords, lines and twines


BS 4895:1981 Specification for semi-tubular rivets for general purpose use

FME/9 confirmed (2016) Reconfirmation

BS 4896:1973 Method for the determination of ash of pulp PAI/11 confirmed (2016) Reconfirmation

BS 4900:1976 Specification for vitreous enamel colours for building purposes


BS 4938-2:1982 Dirt content of milk -- Method for the determination of visible dirt content (rapid method)



of 86

January 2021


BS 4938-2P:1982 Dirt content of milk -- Photographic

standards for the method for the determination of visible dirt content of milk (rapid method)


BS 4965:1999 Decorative laminated plastics sheet veneered boards and panels


BS 4966:1991 Specification for silica refractories for use in coke ovens


BS 4975:1990 Specification for prestressed concrete pressure vessels for nuclear engineering


BS 498:1990 Specification for rasps and engineers' files MTE/15 confirmed (2016) Reconfirmation

BS 4991:1974 Specification for propylene copolymer pressure pipe


BS 499-2C:1999 (R12) Welding terms and symbols -- European arc welding symbols in chart form


BS 4993-1:1974 Methods of test for aluminium fluoride for industrial use -- Determination of fluorine content


BS 4993-2:1974 Methods of test for aluminium fluoride for industrial use -- Determination of iron content


BS 4993-3:1974 Methods of test for aluminium fluoride for industrial use -- Determination of silica content


BS 4995:1973 Recommendations for measurement of the veiling glare index of lenses and optical systems


BS 4996:1973 Specification for line traps for power line carrier systems


BS 4F 123:1996 Woven nylon narrow fabrics for aerospace purposes (nominally 235 dtex yarns)


BS 4F 124:1996 Specification for woven nylon 6.6 narrow fabrics for aerospace purposes (nominally 940 dtex yarns)


BS 4L 54:1986 Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)


BS 4L 56:1986 Specification for tube of aluminium-2$9D% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)


BS 4S 106:1976 Specification. 3% chromium-molybdenum steel billets, bars, forgings and parts (930-1080 MPa: limiting ruling section 150 mm) (suitable for nitriding)


BS 5000-11:1973 (R12) Specification for rotating electrical machines of particular types or for particular applications -- Small-power electric motors and generators


BS 5000-3:2006 Rotating electrical machines of particular types or for particular applications -- Generators to be driven by reciprocating internal combustion engines. Requirements for resistance to vibration


BS 5041-5:1974 Fire hydrant systems equipment -- Specification for boxes for foam inlets and dry riser inlets


BS 5045-6:1987 Transportable gas containers -- Specification for seamless containers of less than 0.5 litre water capacity

PVE/3/3 partially replaced by BS EN 13293:2002

Review closed

BS 5050:1974 Methods of test for cryolite CII/24 confirmed (2016) Reconfirmation

BS 5051-1:1988 Bullet-resistant glazing -- Specification for glazing for interior use

B/520/4 replaced by BS EN 1063:2000

Confirmation


of 86

January 2021


BS 506-1:1987 Methanol for industrial use. -- Specification

for methanol


BS 506-2:1984 Methanol for industrial use -- Methods of test


BS 5067:1985 Specification for flameproof transformers for use in mines


BS 507:1985 Specification for ethanol for industrial use CII/26 confirmed (2016) Reconfirmation

BS 5072-1:1974 Methods of test for sodium fluoride for industrial use -- Determination of water-insoluble matter


BS 5072-2:1974 Methods of test for sodium fluoride for industrial use -- Determination of moisture content


BS 5072-3:1975 Methods of test for sodium fluoride for industrial use -- Determination of fluorine content


BS 508-1:1986 Butan-1-ol for industrial use -- Specification for butan-1-ol


BS 508-2:1984 Butan-1-ol for industrial use -- Methods of test


BS 5086-1:1984 Analysis of butter -- General introduction including preparation of samples


BS 5086-3:1984 Analysis of butter -- Method for determination of water content (routine method)


BS 5086-4:1985 Analysis of butter -- Method for determination of salt content (reference method)


BS 5086-7:1991 Analysis of butter -- Method for determination of pH of butter serum


BS 509-1:1987 Acetone for industrial use -- Specification for acetone


BS 509-2:1984 Acetone for industrial use -- Methods of test


BS 5109:1974 Glossary of terms used in assessing the

performance of optical devices and systems

CPW/172 confirmed (2016) Withdrawal

BS 5116:1974 Method of test for determination of breaking tenacity of flat bundles of cotton fibres


BS 5125:1990 Specification for 50 A 650 V flameproof, restrained and bolted plugs and sockets for use in coal mines


BS 5126-1:1993 Mining type flameproof supply and control units for use on systems up to 1100 V -- Specification for direct-on-line motor starters


BS 5126-2:1993 Mining type flameproof supply and control units for use on systems up to 1100 V -- Specification for circuit breaker units


BS 5126-3:1993 Mining type flameproof supply and control units for use on systems up to 1100 V -- Specification for air-cooled lighting transformer units


BS 5126-4:1993 Mining type flameproof supply and control units for use on systems up to 1100 V -- Specification for air-cooled transformers to power drilling machines


BS 5127:1974 Specification for polyolefin webbing for divans and bed bases


BS 5131-0:1990 Methods of test for footwear and footwear materials -- General introduction


BS 5131-1.1:1991 Methods of test for footwear and footwear materials. Adhesives -- Resistance of adhesive joints to heat (creep test)



of 86

January 2021


BS 5131-1.2:1991 Methods of test for footwear and footwear

materials. Adhesives -- Resistance of adhesive joints to peeling


BS 5131-1.3:1991 Methods of test for footwear and footwear materials. Adhesives -- Preparation of test assemblies using adhesives (other than hot melt adhesives) for heat resistance (creep) and peel tests


BS 5131-1.6:1979 Methods of test for footwear and footwear materials. Adhesives -- Recommended environmental storage conditions for adhesive joints prior to heat resistance or peeling tests


BS 5131-1.7:1991 Methods of test for footwear and footwear materials. Adhesives -- Preparation of test assemblies using hot melt adhesives for heat resistance (creep) and peel tests


BS 5131-1.8:1981 Methods of test for footwear and footwear materials. Adhesives -- Rate of bond strength development in shear of hot melt adhesives for lasting


BS 5131-1.9:1985 Methods of test for footwear and footwear materials. Adhesives -- Measurement of green strength of adhesive joints


BS 5131-2.1:1991 Methods of test for footwear and footwear materials. Solings -- Ross flexing method for cut growth resistance of soling materials


BS 5131-2.11:1983 Methods of test for footwear and footwear materials. Solings -- Resistance of solings to short-term contact with a hot surface


BS 5131-2.7:1980 Methods of test for footwear and footwear materials. Solings -- The preparation of test pieces from soling materials for physical testing


BS 5131-3.1:1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads -- Strength of upper materials and lining materials at right angles to stitch perforations


BS 5131-3.4:1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads -- Edgewise compressibility, upper materials


BS 5131-3.5:1978 Methods of test for footwear and footwear materials. Uppers, textiles and threads -- The break/pipiness test


BS 5131-3.6:1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads -- Abrasion resistance of shoe laces


BS 5131-3.7:1991 Methods of test for footwear and footwear materials. Uppers, textiles and threads -- Breaking strength of shoe laces



materials. Other components -- Resistance to peeling of insole board


BS 5131-4.2:1990 Methods of test for footwear and footwear materials. Other components -- Flexing index of fibreboard


BS 5131-4.5:1990 Methods of test for footwear and footwear materials. Other components -- Tensile strength of fibreboard


BS 5131-4.6:1975 Methods of test for footwear and footwear materials. Other components -- Shear strength of ribs stuck to insoles



of 86

January 2021



materials. Other components -- Resistance to peeling of ribs stuck to insoles


BS 5131-4.8:1990 Methods of test for footwear and footwear materials. Other components -- Resistance of heels of ladies' shoes to lateral impact


BS 5131-5.1:1990 Methods of test for footwear and footwear materials. Testing of complete footwear -- Adhesion of stuck-on and moulded-on soles


BS 5131-5.11:1981 Methods of test for footwear and footwear materials. Testing of complete footwear -- Determination of the strength of buckle fastening assemblies


BS 5131-5.13:1980 Methods of test for footwear and footwear materials. Testing of complete footwear -- Measurement of the strength of stitched seams in upper and lining materials


BS 5131-5.2:1990 Methods of test for footwear and footwear materials. Testing of complete footwear -- Degree of vulcanization of moulded-on rubber soles


BS 5131-5.3:1990 Methods of test for footwear and footwear materials. Testing of complete footwear -- Resistance of complete footwear to heat


BS 5131-5.4:1978 Methods of test for footwear and footwear materials. Testing of complete footwear -- Sole bond peeling strength


BS 5131-5.6:1991 Methods of test for footwear and footwear materials. Testing of complete footwear -- Impact test for rigid units and shoe bottoms


BS 5131-5.7:1978 Methods of test for footwear and footwear materials. Testing of complete footwear -- Fatigue test for rigid units and shoe bottoms


BS 5131-5.9:1979 Methods of test for footwear and footwear materials. Testing of complete footwear -- Strength of top piece attachment to shoe heels


BS 5131-6.1:1981 Methods of test for footwear and footwear materials. Codes of practice -- Code of practice for the comparative evaluation by wear trial of materials, components or constructions


BS 5131-6.2:1979 Methods of test for footwear and footwear materials -Code of practice for the identification in footwear wear trials of major weaknesses in design or construction and the assessment of fitness-for-purpose


BS 5139:1991 Method of specifying general purpose polypropylene and propylene copolymer materials for moulding and extrusion


BS 5154:1991 Specification for copper alloy globe, globe stop and check, check and gate valves

PSE/18/2 current Review closed

BS 5163-1:2004 Valves for waterworks purposes -- Predominantly key-operated cast iron gate valves. Code of practice


BS 5163-2:2004 Valves for waterworks purposes -- Stem caps for use on isolating valves and associated water control apparatus. Specification


BS 5164:1975 Specification for indirect-acting electrical indicating and recording instruments and their accessories



of 86

January 2021


BS 5168:1975 Glossary of rheological terms PRI/10 confirmed (2016)

BS 5190:1985 Specification for pipeline filters, filter bodies and filter elements for milking installations


BS 5194-2:1989 Surgical instruments -- Specification for instruments with pivot joints (excluding cutting instruments)


BS 5194-3:1985 Surgical instruments -- Specification for dissecting forceps


BS 5194-4:1985 Surgical instruments -- Specification for scissors, shears and other jointed cutting instruments


BS 5226:1991 Code of practice for equipment and procedures for the cleaning and disinfecting of milking machine installations


BS 5228-1:2009+A1:2014

Code of practice for noise and vibration control on construction and open sites -- Noise


BS 5228-2:2009+A1:2014

Code of practice for noise and vibration control on construction and open sites -- Vibration


BS 5234-1:1992 Partitions (including matching linings) -- Code of practice for design and installation


BS 5234-2:1992 Partitions (including matching linings) -- Specification for performance requirements for strength and robustness including methods of test


BS 5241-1:1994 Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam when dispensed or sprayed on a construction site -- Specification for sprayed foam thermal insulation applied externally


BS 5246:1976 Specification for pinion type cutters for spur gears - 1 to 8 metric module


BS 525:1991 Specification for fibre cores for wire ropes TCI/77 confirmed (2016) Reconfirmation

BS 5250:2011+A1:2016 Code of practice for control of condensation

in buildings


BS 5261-1:2000 Copy preparation and proof correction -- Design and layout of documents

IDT/2 confirmed (2016) Reconfirmation

BS 5261-2:2005 Copy preparation and proof correction -- Specification for typographic requirements, marks for copy preparation and proof correction, proofing procedure


BS 5261C:2005 Copy preparation and proof correction -- Marks for copy preparation and proof correction (extracted from BS 5261-2:2005)


BS 5266-1:2016 Emergency lighting -- Code of practice for the emergency lighting of premises

EL/1/1 current Confirmation

BS 5270-1:1989 Bonding agents for use with gypsum plasters and cement -- Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters


BS 5272:1975 Method for simultaneous routine determination of the water contents of a batch of dried milk samples


BS 5284:1993 Methods of sampling and testing mastic asphalt used in building and civil engineering


BS 5287:1988 Specification for assessment and labelling of textile floor coverings tested to BS 4790


BS 5305:1984 Code of practice for cleaning and disinfecting of plant and equipment used in the dairying industry



of 86

January 2021


BS 5306-1:2006 Code of practice for fire extinguishing

installations and equipment on premises -- Hose reels and foam inlets


BS 5325:2001 Installation of textile floor coverings. Code of practice


BS 5335-2:2006 Continental quilts -- Determination of thermal resistance for quilts filled with feather and/or down


BS 5341-5:1976 Piston rings up to 200 mm diameter for reciprocating internal combustion engines -- Ring grooves


BS 5347:1976 Specification for silicon-iron strip-wound cores for use in transformers and inductors for telecommunications and electronic equipment


BS 5350-0:1987 Methods of test for adhesives -- General introduction


BS 5350-A1:1976 Methods of test for adhesives. Adherends --

Adherend preparation


BS 5350-A2:1990 Methods of test for adhesives. Adherends -- Guide to the selection of adherend materials


BS 5350-B5:1976 Methods of test for adhesives -- Determination of gelation time


BS 5350-B9:1984 Methods of test for adhesives. Adhesives -- Determination of resistance to sagging (flow after application)


BS 5350-C1:1986 Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Determination of cleavage strength of adhesive bonds


BS 5350-C13:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Climbing drum peel test


BS 5350-C14:1979 Methods of test for adhesives. Adhesively

bonded joints: mechanical tests -- 90$0D peel test for a rigid-to-rigid assembly


BS 5350-C15:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Determination of bond strength in compressive shear


BS 5350-C5:2002 Methods of test for adhesives -- Determination of bond strength in longitudinal shear for rigid adherends


BS 5350-C7:1990 Methods of test for adhesives. Adhesively bonded joints: mechanical tests -- Determination of creep and resistance to sustained application of force


BS 5350-D4:1976 Methods of test for adhesives. Adhesively bonded joints: environmental tests -- Determination of staining potential


BS 5350-E1:1976 Methods of test for adhesives. Sampling and analysis of test data -- Guide to statistical analysis


BS 5350-G3:1987 Methods of test for adhesives -- Determination of ability of anaerobic adhesives to set on metal surfaces


BS 5350-H1:1981 Methods of test for adhesives -- Determination of heat stability of hot melt adhesives in the application equipment


BS 5350-H2:1982 Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of low temperature flexibility or cold crack temperature



of 86

January 2021


BS 5350-H3:1984 Methods of test for adhesives. Physical

tests on hot-melt adhesives -- Determination of heat resistance of hot-melt adhesives


BS 5350-H4:1984 Methods of test for adhesives. Physical tests on hot-melt adhesives -- Determination of maximum open time of hot-melt adhesives (oven method)


BS 5383:1986 Specification for material identification of steel, nickel alloy and titanium alloy tubes by continuous character marking and colour coding of steel tubes


BS 5385-3:2014 Wall and floor tiling -- Design and installation of internal and external ceramic and mosaic floor tiling in normal conditions. Code of practice


BS 5385-5:2009 Wall and floor tiling -- Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice


BS 5391-1:2006 Acrylonitrile-butadiene-styrene (ABS) pressure pipe -- Specification


BS 5392-1:2006 Acrylonitrile-butadiene-styrene (ABS) fittings for use with ABS pressure pipe -- Specification


BS 5395-2:1984 Stairs, ladders and walkways -- Code of practice for the design of helical and spiral stairs


BS 5395-4:2011 Code of practice for the design of stairs for limited access


BS 5398:1976 Classification of methods for mounting and joining of fishing nets


BS 5401:1990 Guide to information content and presentation of operators' manuals provided for tractors and machinery for agriculture and forestry


BS 5402:1976 Specification for patient trolleys CH/100 confirmed (2016) Reconfirmation

BS 5409-1:1976 Specification for nylon tubing -- Fully plasticized nylon tubing types 11 and 12 for use primarily in pneumatic installations


BS 5410-3:2016 Code of practice for oil firing -- Installations for furnaces, kilns, ovens, oil-fuelled generators and other industrial purposes

RHE/13 current Revision

BS 5415-2.2:Supplement No. 1:1986

Safety of electrical motor-operated industrial and commercial cleaning appliances. ... Specification for type H industrial vacuum cleaners for dusts hazardous to health

CPL/61/10 confirmed (2016) Withdrawal

BS 5416:1990 Specification for china tableware CW/29 confirmed (2016) Reconfirmation

BS 5429:1976 Code of practice for safe operation of small-scale storage facilities for cryogenic liquids


BS 5443:1977 Recommendations for a standard layout for methods of chemical analysis by gas chromatography


BS 5452:1977 Specification for hospital hollow-ware made of plastics material


BS 5455:1977 Specification for polyurethane coated nylon fabric for mattress covers


BS 5467:2016 Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification

GEL/20/17 current Confirmation

BS 5489-2:2016 Code of practice for the design of road lighting -- Lighting of tunnels

EL/1/3 current Confirmation


of 86

January 2021


BS 549:1970 Specification for diacetone alcohol CII/26 confirmed (2016) Reconfirmation

BS 5499-10:2014 Guidance for the selection and use of safety signs and fire safety notices

PH/8/1 current Review closed

BS 5502-0:1992 Buildings and structures for agriculture -- Introduction


BS 5502-11:2005 Buildings and structures for agriculture -- Guide to regulations and sources of information


BS 5502-23:2004 Buildings and structures for agriculture -- Fire precautions. Code of practice


BS 5502-25:1991 Buildings and structures for agriculture -- Code of practice for design and installation of services and facilities


BS 5502-30:1992 Buildings and structures for agriculture -- Code of practice for control of infestation


BS 5502-31:1995+A1:2011

Buildings and structures for agriculture -- Guide to the storage and handling of waste


BS 5502-32:1990 Buildings and structures for agriculture -- Guide to noise attenuation


BS 5502-33:1991 Buildings and structures for agriculture -- Guide to the control of odour pollution


BS 5502-40:2005 Buildings and structures for agriculture -- Code of practice for design and construction of cattle buildings


BS 5502-41:1990 Buildings and structures for agriculture -- Code of practice for design and construction of sheep buildings and pens


BS 5502-42:1990 Buildings and structures for agriculture -- Code of practice for design and construction of pig buildings


BS 5502-43:1990 Buildings and structures for agriculture -- Code of practice for design and construction of poultry buildings


BS 5502-49:1990 Buildings and structures for agriculture -- Code of practice for design and construction of milking premises


BS 5502-51:1991 Buildings and structures for agriculture -- Code of practice for design and construction of slatted, perforated and mesh floors for livestock


BS 5502-52:1991 Buildings and structures for agriculture -- Code of practice for design of alarm systems, emergency ventilation and smoke ventilation for livestock housing


BS 5502-60:1992 Buildings and structures for agriculture -- Code of practice for design and construction of buildings for mushrooms


BS 5502-65:1992 Buildings and structures for agriculture -- Code of practice for design and construction of crop processing buildings


BS 5502-66:1992 Buildings and structures for agriculture -- Code of practice for design and construction of chitting houses


BS 5502-70:1992 Buildings and structures for agriculture -- Code of practice for design and construction of ventilated on floor stores for combinable crops


BS 5502-71:1992 Buildings and structures for agriculture -- Code of practice for design and construction of ventilated stores for potatoes and onions



of 86

January 2021


BS 5502-72:1992 Buildings and structures for agriculture --

Code of practice for design and construction of controlled environment stores for vegetables, fruit and flowers


BS 5502-74:1991 Buildings and structures for agriculture -- Code of practice for design and construction of bins and silos for combinable crops


BS 5502-75:1993 Buildings and structures for agriculture -- Code of practice for the design and construction of forage stores


BS 5502-80:1990 Buildings and structures for agriculture -- Code of practice for design and construction of workshops, maintenance and inspection facilities


BS 5502-81:1989 Buildings and structures for agriculture -- Code of practice for design and construction of chemical stores


BS 5502-82:1997 Buildings and structures for agriculture -- Code of practice for design of amenity buildings


BS 551:1990 Specification for butyl acetate for industrial use


BS 552:1970 Specification for amyl acetate CII/26 confirmed (2016) Reconfirmation

BS 553:1990 Specification for ethyl acetate for industrial use


BS 5540-3:1978 Specification for evaluating particulate contamination of hydraulic fluids -- Methods of bottling fluid samples


BS 5540-6:1990 Evaluating particulate contamination of hydraulic fluids -- Method of calibrating liquid automatic particle-count instruments (using mono-sized latex spheres)


BS 5544:1978 Specification for anti-bandit glazing (glazing resistant to manual attack)


BS 5550-1.3.3:1980 Cinematography. 8 mm film. Camera usage -- Specification for claw-to-gate distance in 8 mm Type R spool-loading cinematograph equipment

CPW/36 current Review closed

BS 5550-2.12.1:1993 Cinematography. 16 mm film. Miscellaneous -- Specification for test film for assessing the picture performance of 16 mm motion-picture projectors


BS 5550-2.7.2:1982 Cinematography. 16 mm film. Projection -- Specification for the performance of 16 mm sound-film projectors


BS 5550-2.9.3:1980 Cinematography. 16 mm film. Projector spools -- Specification for 16 mm film spools of 732 m capacity (43 cm size) for specialized equipment


BS 5550-3.1.2:1978 Cinematography. 35 mm film. Raw stock -- Specification for the dimensional features of

magnetic coatings on 35 mm perforated film


BS 5550-3.10.1:1980 Cinematography. 35 mm film. Sprockets -- Specification for broad tooth sprockets for 35 mm perforated film


BS 5550-3.10.2:1980 Cinematography. 35 mm film. Sprockets -- Specification for universal sprockets for 35 mm perforated film


BS 5550-3.12.1:1979 Cinematography. 35 mm film. Miscellaneous -- Specification for metal cans for processed 35 mm motion-picture film



of 86

January 2021


BS 5550-3.9.1:1980 Cinematography. 35 mm film. Projector

spools -- Specification for 35 mm film spools of 610 m capacity (38 cm size) for release prints


BS 5550-5.4.1:1986 Cinematography. Common to more than one gauge. Sound -- Code of Practice for the identification of systems for synchronization of unperforated audio tape with motion-picture film and videotape


BS 5550-6.4:1980 Cinematography. Television usage -- Recommendations for the density range, contrast and colour balance of films and slides for colour television


BS 5550-7.1.1:1980 Cinematography. Production and presentation. Light sources and lighting -- Specification for exciter lamps


BS 5550-7.2.5:1980 Cinematography. Production and presentation. Screens and screen luminance -- Specification for cinematograph screens


BS 5550-7.5.4:1981 Cinematography. Production and presentation. Film and television location lighting -- Specification for single pole high current plugs and socket connectors


BS 5551-4.2.2:1987 Fertilizers. Chemical analysis. Determination of phosphorus. -- Extraction of phosphates soluble in mineral acids

CII/37 confirmed (2012) Review closed

BS 5551-4.2.3:1987 Fertilizers. Chemical analysis. Determination of phosphorus. -- Method for determination of phosphorus content (quinoline molybdophosphate gravimetric method)


BS 5577:1999 Specification for table cutlery with non-metallic handles


BS 558 and 564:1970 Specifications for nickel anodes, anode nickel and nickel salts for electroplating


BS 5606:1990 Guide to accuracy in building B/554 confirmed (2016) Reconfirmation

BS 5608:1993 Specification for preformed rigid polyurethane (PUR) and polyisocyanurate (PIR) foams for thermal insulation of pipework and equipment


BS 5620:1995 Specification for 200 A 1100 V flameproof restrained and bolted plugs and sockets for use in coal mines


BS 5634:1978 Methods of test for potassium hydroxide CII/26 confirmed (2016) Reconfirmation

BS 5642-1:1978+A1:2014

Sills, copings and cappings -- Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone


BS 5642-2:1983+A1:2014

Sills, copings and cappings -- Specification for copings and cappings of precast concrete, cast stone, clayware, slate and natural stone


BS 5643:1984 Glossary of refrigeration, heating, ventilating and air-conditioning terms


BS 5655-13:1995 Lifts and service lifts -- Recommendations for vandal resistant lifts

MHE/4 replaced by BS EN 81-71

Confirmation

BS 5655-6:2011 Lifts and service lifts -- Code of practice for the selection, installation and location of new lifts

MHE/4 confirmed (2016) Reconfirmation

BS 5658:1979 Specification for gold potassium cyanide for electroplating



of 86

January 2021


BS 5688-0:1986 Methods of test for orthoboric acid (boric

acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use -- General introduction


BS 5708:1979 Specification for pruner shears (secateurs) MTE/15 confirmed (2016) Reconfirmation

BS 572:1985 Specification for interchangeable conical ground glass joints


BS 5724-3.26:1990 Medical electrical equipment. Particular requirements for performance -- Method for declaring parameters for ultrasonic diagnostic equipment using test objects


BS 5726:2005 Microbiological safety cabinets. Information to be supplied by the purchaser to the vendor and to the installer, and siting and use of cabinets. Recommendations and guidance


BS 5732:1985 Specification for glass disposable Pasteur

pipettes


BS 5734-5:1990 Polyester moulding compounds for electrical and other purposes -- Specification for sheet moulding compounds for mechanical purposes


BS 5739:1979 Method of presentation of lubrication instructions for machine tools


BS 5742:1989 Specification for textile labels requiring to be washed and/or dry cleaned


BS 5754:1987 Specification for electrical analogue and state signals for use in coal mines


BS 5760-0:2014 Reliability of systems, equipment and components -- Guide to reliability and maintainability

DS/1 current Review closed

BS 5760-24:2014 Reliability of systems, equipment and components -- Guide to the integration of risk techniques in the inspection and testing

of complex systems

DS/1 current Review closed

BS 5760-8:1998 Reliability of systems, equipment and components -- Guide to assessment of reliability of systems containing software

DS/1 confirmed (2016) Reconfirmation

BS 576-1:1988 Acetic acid for industrial use. -- Specification for acetic acid


BS 576-2:1988 Acetic acid for industrial use -- Methods of test for acetic acid


BS 5763-5:1981 Methods for microbiological examination of food and animal feeding stuffs -- Enumeration of micro-organisms. Colony count at 30$0DC (surface plate technique)


BS 579:1957 Specification for diethyl ether (technical) CII/26 confirmed (2016) Reconfirmation

BS 5809:1980 Specification for safety and efficiency of the gas heating equipment of commercial dishwashing machines


BS 5815-1:2005 Sheets, sheeting, pillowslips, towels,

napkins, counterpanes and continental quilt secondary covers suitable for use in the public sector -- Specification for sheeting, sheets and pillowslips


BS 5833:1988 Scheme for labelling of footwear TCI/69 confirmed (2016) Reconfirmation

BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities -- Specification for surface boxes


BS 5834-4:2011 Surface boxes, guards and underground chambers for the purposes of utilities -- Specification for utility chambers



of 86

January 2021


BS 5839-9:2011 Fire detection and fire alarm systems for

buildings -- Code of practice for the design, installation, commissioning and maintenance of emergency voice communication systems

FSH/12/5 current Reconfirmation

BS 5852:2006 Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources

FW/6 confirmed (2016) Reconfirmation

BS 5852-1:1979 Fire tests for furniture -- Methods of test for the ignitability by smokers' materials of upholstered composites for seating


BS 5852-2:1982 Fire tests for furniture -- Methods of test for the ignitability of upholstered composites for seating by flaming sources


BS 5877:1980 Guide for subjective listening tests for sound radio receivers

EPL/100 current Review closed

BS 5883:1996 Specification for surface swimming goggles SW/136/8 confirmed (2016) Withdrawal

BS 5892-1:1992+A3:2009

Railway rolling stock materials -- Specification for axles for traction and trailing stock


BS 5892-7:2014 Railway rolling stock materials -- Specification for product and technical approval requirements for cast wheels


BS 5911-3:2010+A1:2014

Concrete pipes and ancillary concrete products -- Specification for unreinforced and reinforced concrete manholes and soakaways (complementary to BS EN 1917:2002)


BS 5920:1980 Method for determination of dimensions of textile floor covering test specimens


BS 5921:1980 Methods for determination of size, squareness and straightness of edge of textile floor covering tiles


BS 5923-2:1980 Methods for chemical analysis of rubber -- EDTA titrimetric method for determination

of zinc content of rubber products


BS 5931:1980 Code of practice for machine laid in situ edge details for paved areas


BS 5955-8:2001 Plastics pipework (thermoplastics materials) -- Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings


BS 5962:1980 Specifications for naphthalene (including test methods)


BS 598-1:2011 Sampling and examination of bituminous mixtures -- for the measurement of the rate of spread of coated chippings and the temp of bituminous mixtures...for assessment of the compaction performance of a roller


BS 5986:1980 Specification for electrical safety and

performance of gas fired space heating appliances with inputs 60 kW to 2 MW


BS 5990:2006 Specification for direct gas-fired forced convection air heaters with heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements

GSE/20/4 confirmed (2016) Reconfirmation


of 86

January 2021


BS 5991:2006 Specification for indirect gas fired forced

convection air heaters with heat inputs greater than 330 kW but not exceeding 2 MW for industrial and commercial space heating. Safety and performance requirements

GSE/20/4 confirmed (2016) Reconfirmation

BS 5992-6:1984 Electrical relays -- Specification for the basic modules for the dimensions of general purpose all-or-nothing relays


BS 5F 59:2002 Braided linen (flax) cord for aerospace purposes


BS 5G 178-1:1993 Crimped joints for aircraft electrical cables and wires. -- Specification for design requirements (including tests) for components and tools


BS 5L 101:2011 Procedure for inspection, testing and acceptance of aluminium-base and magnesium-base ingots and castings


BS 5L 36:1985 Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)


BS 5S 82:1976 Specification. 4% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1320-1520 MPa)


BS 600:2000 A guide to the application of statistical methods to quality and standardization

SS/3 current Review closed

BS 6000-1:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- General guide to acceptance sampling

SS/5 confirmed (2016) Reconfirmation

BS 6000-2:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Guide to sampling by attributes


BS 6000-3:2005 Guide to the selection and usage of acceptance sampling systems for inspection of discrete items in lots -- Guide to sampling by variables


BS 6002-3:2005 Sampling procedures for inspection by variables -- Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection


BS 6005:1997 Specification for moulded transparent polycarbonate bowls used in compressed air filters and lubricators


BS 6031:2009 Code of practice for earthworks B/526 current Review closed

BS 6043-1.12:1994 Method of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch. -- Determination of mesophase content


BS 6043-1.7:1988 Methods of sampling and test for carbonaceous materials used in aluminium

manufacture. Electrode pitch -- Determination of apparent density (buoyancy method)


BS 6043-2.12:1994 Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. -- Determination of particle size distribution of fine coke


BS 6047-1:1981 Flame supervision devices for domestic, commercial and catering gas appliances -- Specification for heat sensitive type



of 86

January 2021


BS 6068-2.17:1986 Water quality. Physical, chemical and

biochemical methods -- Methods for determination of total cyanide

EH/3/2 confirmed (2016) Reconfirmation

BS 6068-2.18:1986 Water quality. Physical, chemical and biochemical methods -- Methods for the determination of easily liberatable cyanide


BS 6068-2.34:1988 Water quality. Physical, chemical and biochemical methods -- Method for the determination of the chemical oxygen demand


BS 6070-0:1981 Methods of sampling and test for sodium carbonate for industrial use -- General introduction


BS 6070-7:1981 Methods of sampling and test for sodium carbonate for industrial use -- Determination of copper content


BS 6075-0:1981 Methods of sampling and test for sodium hydroxide for industrial use -- General introduction


BS 6075-12:1981 Methods of sampling and test for sodium hydroxide for industrial use -- Determination of copper content


BS 6075-14:1981 Methods of sampling and test for sodium hydroxide for industrial use -- Determination of matter insoluble in water


BS 6076:1996 Specification for polymeric film for use as a protective sleeving for buried iron pipes and fittings (for site and factory application)


BS 6092-0:1981 Methods of sampling and test for sodium and potassium silicates for industrial use -- General introduction


BS 6092-10:1981 Methods of sampling and test for sodium and potassium silicates for industrial use -- Determination of matter insoluble in water


BS 6092-11:1981 Methods of sampling and test for sodium and potassium silicates for industrial use -- Determination of chloride content of sodium metasilicate


BS 6092-12:1981 Methods of sampling and test for sodium and potassium silicates for industrial use -- Limit test for sulphate content of sodium metasilicate


BS 61:1969 Specification for threads for light gauge copper tubes and fittings

NFE/34 confirmed (2016)

BS 6101-1:1981 Machine tool ball screws -- Methods of calculating dynamic and static load and life ratings


BS 6101-2:1991 Machine tool ball screws -- Specification for accuracy, including geometrical tests


BS 6101-6:1990 Machine tool ball screws -- Specification for ball nuts and principal dimensions of ball screws


BS 6102-16:1997 Cycles -- Specification for replacement brake blocks

GME/25 current Review closed

BS 6102-3:1986 Cycles -- Specification for photometric and physical requirements of lighting equipment


BS 6121-1:2005 Mechanical cable glands -- Armour glands. Requirements and test methods


BS 6121-5:2005 Mechanical cable glands -- Code of practice for selection, installation and inspection of cable glands and armour glands


BS 6131:1982 Glossary of terms relating to household sewing machines


BS 6137:1982 Specification for electroplated coatings of tin/lead alloys



of 86

January 2021


BS 6142:1981 Specification for presentation of technical

data on hydraulic systems of agricultural tractors and machinery


BS 6168:1987 Specification for non-metallic spur gears MCE/5 confirmed (2016) Reconfirmation

BS 6170:1981 Specification for flax canvas water buckets TCI/77 confirmed (2016) Reconfirmation

BS 6180:2011 Barriers in and about buildings. Code of practice


BS 6182-1:1994 Intriniscally safe power supplies for use in coal mines -- Specification for d.c. power supplies


BS 6182-2:1982 Intrinsically safe power supplies for use in coal mines -- Specification for a.c. power supplies


BS 6185:1982 Specification for size designation of men's wear

TCI/66/-/3 current Review closed

BS 6187:2011 Code of practice for full and partial demolition


BS 6196:1989 Specification for sterile epidural catheters and introducer needles for single use


BS 6230:2011 Specification for installation of gas-fired forced convection air heaters for commercial and industrial space heating (2nd and 3rd family gases)


BS 6246-5:1991 Industrial laundry machinery -- Methods for the assessment of the effect of shaped garment finishing machinery on textiles


BS 6248-1:1982 Caseins and caseinates -- General introduction, including preparation of laboratory samples


BS 6248-6:1982 Caseins and caseinates -- Method for determination of lactose content (photometric method)


BS 6256:1989 Specification for paper for steam sterilization paper bags, pouches and reels for medical use


BS 6262:1982 Code of practice for glazing for buildings B/520/4 partially replaced by Parts 1-4 and 6-7 of BS 6262. It will be withdrawn on publication of BS 6262-5

Confirmation

BS 6266:2011 Fire protection for electronic equipment installations. Code of practice


BS 6290-2:1999 Lead-acid stationary cells and batteries -- Specification for the high-performance Plante positive type


BS 6290-3:1999 Lead-acid stationary cells and batteries -- Specification for the flat positive plate type


BS 6319-2:1983 Testing of resin and polymer/cement compositions for use in construction -- Method for measurement of compressive strength


BS 6319-3:1990 Testing of resin and polymer/cement compositions for use in construction -- Methods for measurement of modulus of elasticity in flexure and flexural strength


BS 6319-5:1984 Testing of resin and polymer/cement compositions for use in construction -- Methods for determination of density of hardened resin compositions


BS 6319-6:1984 Testing of resin and polymer/cement compositions for use in construction -- Method for determination of modulus of elasticity in compression



of 86

January 2021


BS 6324-4:1983 Terms relating to surgical implants --

Glossary of orthopaedic surgical terms


BS 6349-5:2016 Maritime works -- Code of practice for dredging and land reclamation

CB/502 current Confirmation

BS 6349-7:1991 Maritime structures -- Guide to the design and construction of breakwaters


BS 6353:1983 Specification for underground loudspeaker communication systems in coal mines


BS 6356-4:1989 Spraying equipment for crop protection -- Specification for performance limits for field spraying nozzles


BS 6356-7:1993 Spraying equipment for crop protection -- Guide for typical data sheet layout


BS 6356-8:1996 Spraying equipment for crop protection -- Specification for induction hoppers


BS 6356-9:1996 Spraying equipment for crop protection -- Specification for systems for closed transfer of liquid formulations


BS 6359:1983 Specification for dimensions and position of microfiche heading coating (colour stripe)

IDT/1 current Review closed

BS 6361:1988 Specification for three-pin plug connectors for electrically controlled fluid power equipment


BS 6364:1984 Specification for valves for cryogenic service

PSE/18/1 proposed for withdrawal (2019)

Withdrawal

BS 6375-1:2015+A1:2016

Performance of windows and doors -- Classification for weathertightness and guidance on selection and specification


BS 6375-2:2009 Performance of windows and doors -- Classification for operation and strength characteristics and guidance on selection and specification


BS 6376-3:1989 Reagents for chemical analysis -- Specifications (second series)


BS 6391:2009 Specification for non-percolating layflat

delivery hoses and hose assemblies for fire fighting purposes


BS 6392-0:1983 Testing of ethanol for industrial use -- General introduction


BS 6392-1:1983 Testing of ethanol for industrial use -- Method for detection of alkalinity or determination of acidity to phenolphthalein


BS 6392-2:1983 Testing of ethanol for industrial use -- Method for determination of carbonyl compounds content present in small amounts (photometric method)


BS 6392-3:1983 Testing of ethanol for industrial use -- Method for determination of carbonyl compounds content present in moderate amounts (titrimetric method)


BS 6392-4:1983 Testing of ethanol for industrial use -- Method for determination of aldehydes

content


BS 6392-5:1983 Testing of ethanol for industrial use -- Method of test for miscibility with water


BS 6392-6:1983 Testing of ethanol for industrial use -- Method for determination of methanol content [0.01% (V/V) to 0.20% (V/V)] (photometric method)


BS 6392-7:1983 Testing of ethanol for industrial use -- Method for determination of methanol content [0.10% (V/V) to 1.50% (V/V)] (visual colorimetric method)



of 86

January 2021


BS 6392-8:1983 Testing of ethanol for industrial use --

Method for determination of esters content


BS 6392-9:1983 Testing of ethanol for industrial use -- Method for determination of permanganate time


BS 6395:1983 Method for numerical designation of fabric faults by visual inspection


BS 6400-1:2016 Specification for installation, exchange, relocation, maintenance and removal of gas meters with a maximum capacity not exceeding 6 m<sup>3</sup>/h -- Low pressure (2nd family gases)

GSE/30/-/2 current Confirmation

BS 6410:1991 Methods of test for filter papers PAI/11 confirmed (2016) Reconfirmation

BS 6434:1984 Guide to the use of BS 6065 'Methods for sampling and acceptance testing of shaped refractory products'


BS 6440:2011 Powered vertical lifting platforms having non-enclosed or partially enclosed liftways intended for use by persons with impaired mobility. Specification


BS 6451:1984 Specification for netting and fibre rope load restraint systems in surface transport


BS 6453:1984 Specification for performance of leathers for garments


BS 6455:1984 Method for monitoring the levels of residual solvents in flexible packaging materials

CW/47 current Review closed

BS 6466:1984 Code of practice for design and installation of ceramic fibre furnace linings


BS 6475:1984 Specification for processor system bus interface (Eurobus A)

ICT/1 confirmed (2016) Reconfirmation

BS 6485:1999 PVC-covered conductors for overhead power lines


BS 6501-1:2004 Metal hose assemblies -- Guidance on the construction and use of corrugated hose assemblies

GSE/42 current Review closed

BS 6504:1984 Method for determination of water absorption of paper and board (Klemm method)


BS 6513-1:1984 Wideband cabled distribution systems -- Glossary of terms


BS 6513-2:1984 Wideband cabled distribution systems -- Methods of measurement


BS 6513-5:1987 Wideband cabled distribution systems -- Recommendations for one-way and interactive data services


BS 6525:1984 Specification for design and construction of reservoirs used in hydraulic fluid power systems


BS 6533:1984 Guide to macroscopic examination of steel by etching with strong mineral acids

ISE/101/7 current Review closed

BS 6534:1984 Method for quantitative determination of lead in tin coatings


BS 6556-1:1985 Low speed digital signals for use in coal mines. -- Specification for optical coupling


BS 6556-2:1985 Low speed digital signals for use in coal mines -- Specification for transformer coupling


BS 6556-3:1985 Low speed digital signals for use in coal mines -- Specification for message protocols


BS 6563:1985 Method for determination of the roughness of paper and board by the Parker Print-surf apparatus



of 86

January 2021


BS 6564-3:1990 Polytetrafluoroethylene (PTFE) materials

and products -- Specification for E glass fibre filled polytetrafluoroethylene


BS 658:1989 Specification for apparatus for the determination of distillation range (including flasks and receivers)


BS 6582:2000 Continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products


BS 6586-1:1993 Rigid polyurethane (PUR) foam produced by the press injection method -- Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies


BS 6593:1985+A1:2009 Code of practice for On-site non-mechanical jointing of plied textile and steel reinforced conveyor belting


BS 6600-1:1987 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment -- Specification for the outline dimensions of transformers and inductors using YEI-1 laminations


BS 6600-10:1985 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment -- Specification for the outline dimensions of transformers and inductors using the Q range of C-cores


BS 662-1:1979 Carbon disulphide for industrial use. -- Specification


BS 662-3:1979 Carbon disulphide for industrial use -- Additional methods of test


BS 6644:2011 Specification for the installation and maintenance of gas-fired hot water boilers of rated inputs between 70 kW (net) and 1.8 MW (net) (2nd and 3rd family gases)


BS 6660-1:2005 Guide to setting up and maintaining micrographics and digital imaging units -- Micrographics

IDT/1 confirmed (2016) Reconfirmation

BS 667:2005 Illuminance meters. Requirements and test methods

EL/1 confirmed (2016) Reconfirmation

BS 6680:1985 Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp


BS 669-2:1997 Flexible hoses, end fittings and sockets for gas burning appliances -- Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances - 1, 2, 3 family gases


BS 6704:1996 Code of practice for selection, installation and maintenance of intrinsically safe electrical equipment in coal mines


BS 6705:1987 Specification for electrical measuring instruments for use on intrinsically safe circuits in coal mines


BS 6706:1986 Specification for disposable glass serological pipettes


BS 6708:1998 Flexible cables for use at mines and quarries


BS 6709:1986 Specification for interconnection of electrical apparatus, constructed to two or more British Standards, for use in mines susceptible to firedamp


BS 6710:1987 Specification for dimensions of chain wheel tooth forming tools



of 86

January 2021


BS 6715:1991 Specification for chamois leather TCI/69 confirmed (2016) Reconfirmation

BS 6716:1986 Guide to properties and types of rubber PRI/54 confirmed (2016) Reconfirmation

BS 6724:2016 Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification


BS 6736:1986 Code of practice for hand signalling for use in agricultural operations


BS 6739:2009 Code of practice for instrumentation in process control systems: installation design and practice

GEL/65 current Confirmation

BS 6744:2016 Stainless steel bars. Reinforcement of concrete. Requirements and test methods

ISE/104 current Revision

BS 6748:1986+A1:2011 Specification for limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware


BS 6750:1986 Specification for modular coordination in building

B/554 partially replaced by BS ISO 21723:2019

Confirmation

BS 6756:1986 Specification for fibre rope cargo nets MHE/16 confirmed (2016) Reconfirmation

BS 6765-4:1987 Leisure accommodation vehicles. Caravans -- Specification for undergear

AUE/13 confirmed (2016) Withdrawal

BS 6767-1:1999 Transportable accommodation units -- Recommendations for design and construction of the basic unit


BS 6770:1988 Guide for exterior colours for park homes (mobile homes), holiday caravans and transportable accommodation units


BS 6807:2006 Methods of test for assessment of ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition


BS 6810-1:1987 Determination of metals in textiles --

Analysis by atomic absorption and colorimetric spectroscopy


BS 6810-2:2005 Determination of metals in textiles -- Analysis by atomic emission spectroscopy


BS 6829-2.1:1988 Analysis of surface active agents (raw materials). Alkane sulphonates -- Method for determination of total alkaline sulphonates content


BS 684-0.1:1995 Methods of analysis of fats and fatty oils. General introduction -- General procedures and list of determinations in BS 684


BS 684-1.11:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of penetration value


BS 684-1.13:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of cooling curve


BS 684-1.5:1987 Methods of analysis of fats and fatty oils. Physical methods -- Determination of cloud point


BS 684-1.7:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of surface-drying time


BS 684-1.8:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of smoke point


BS 684-1.9:1976 Methods of analysis of fats and fatty oils. Physical methods -- Determination of water-insoluble solvents



of 86

January 2021


BS 6841:1987 Guide to measurement and evaluation of

human exposure to whole-body mechanical vibration and repeated shock

GME/21/6 current Review closed

BS 684-2.12:1984 Methods of analysis of fats and fatty oils. Other methods -- Determination of oxidized fatty acids


BS 684-2.15:1986 Methods of analysis of fats and fatty oils. Other methods -- Calculation of total saponifiable matter


BS 684-2.16:1976 Methods of analysis of fats and fatty oils. Other methods -- Determination of copper. Colorimetric method


BS 684-2.17:1976 Methods of analysis of fats and fatty oils. Other methods -- Determination of iron. Colorimetric method


BS 684-2.20:1977 Methods of analysis of fats and fatty oils. Other methods -- Determination of carotene in vegetable oils


BS 684-2.27:1987 Methods of analysis of fats and fatty oils. Other methods -- Determination of bleachability


BS 684-2.29:1978 Methods of analysis of fats and fatty oils. Other methods -- Cottonseed oil test (Halphen)


BS 684-2.4:1976 Methods of analysis of fats and fatty oils. Other methods -- Calculation of total fatty matter


BS 684-2.48:1998 Methods of analysis of fats and fatty oils. Other methods -- Determination of mineral acidity


BS 684-2.8:1977 Methods of analysis of fats and fatty oils. Other methods -- Determination of total neutral oil


BS 6873:1988 Specification for filament lamps for cycles CPL/34/1 current Review closed

BS 6882:1987 Guide for storage of raw solid natural and synthetic rubber


BS 6883:1999 Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods

GEL/20/6 confirmed (2016) Reconfirmation

BS 6886:1987 Specification for alumino-silicate refractories for use in coke ovens


BS 6894:1987 Specification for jute hessian tubing TCI/77 confirmed (2016) Reconfirmation

BS 6896:2011 Specification for installation and maintenance of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)


BS 6898:1987 Specification for glass centrifuge tubes for general laboratory use


BS 6907-1:1988 Electrical installations for open-cast mines and quarries -- Glossary


BS 6907-2:1988 Electrical installations for open-cast mines and quarries -- General recommendations

for protection against direct contact and electric shock


BS 6907-3:1988 Electrical installations for open-cast mines and quarries -- Recommendations for equipment and ancillaries


BS 6907-4:1988 Electrical installations for open-cast mines and quarries -- Recommendations for winning, stacking and processing machinery, pumps and low signal level and communications systems



of 86

January 2021


BS 6907-5:1988 Electrical installations for open-cast mines

and quarries -- Recommendations for operation


BS 6915:2001+A1:2014 Design and construction of fully supported lead sheet roof and wall coverings. Code of practice


BS 6920-1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- Specification

EH/6 current Review closed

BS 6920-2.1:2014 Suitability of non-metallic materials and products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- Samples for testing


BS 6920-2.2.2:2000+A1:2014

Suitability of non-metallic products for use in contact with water intended for human consumption... Method of testing odours and flavours imparted to water by multi-layered hoses and pipes

EH/6 current Confirmation

BS 6920-2.2.3:2000+A2:2014

Suitability of non-metallic products for use in contact with water intended for human consumption… testing tastes imparted to water by hoses for conveying water for food and drink preparation


BS 6920-2.3:2000+A1:2014

Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- Appearance of water


BS 6920-2.4:2000+A1:2014

Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of water -- Growth of aquatic

micro-organisms test


BS 6920-2.5:2000+A2:2014

Suitability of non-metallic products for use in contact with water intended for human consumption ... The extraction of substances that may be of concern to public health


BS 6920-2.6:2000+A2:2014

Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water -- The extraction of metals


BS 6923:1988 Method for calculation of small colour differences


BS 6925:1988 Specification for mastic asphalt for building and civil engineering (limestone aggregate)


BS 6931:1988 Glossary of terms for copper and copper alloys


BS 6956-1:1988 Jointing materials and compounds -- Specification for corrugated metal joint rings


BS 6956-5:1992 Jointing materials and compounds -- Specification for jointing compounds for use with water, low pressure saturated steam, 1st family gases (excluding coal gas) and 2nd family gases


BS 6981:1988 Method for determination of acid content of wool


BS 6990:1989 Code of practice for welding on steel pipes containing process fluids or their residuals



of 86

January 2021


BS 6997:1990 Specification for elastomeric toroidal sealing

rings ('O'-rings) manufactured from acrylonitrile-butadiene rubbers complying with BS 6996


BS 6F 37:1990 Specification for 570 g/m$u2 and 640 g/m$u2 cotton canvas fabrics for aerospace purposes


BS 6L 16:1985 Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)


BS 6L 17:1985 Specification for sheet and strip of 99% aluminium (temper designation-O)


BS 7000-6:2005 Design management systems -- Managing inclusive design. Guide

DES/1 confirmed (2016) Reconfirmation

BS 7019:1989 Specification for fully screened 400 A bolted flameproof cable couplers and adaptors for use on systems up to and including 6.6 kV, primarily for use in mines


BS 7033-2:1989 Cleaning and polishing cloths -- Specification for industrial wipers from reclaimed materials, and waste yarn for cleaning and lubricating purposes


BS 7033-3:1989 Cleaning and polishing cloths -- Specification for floorcloths and dishcloths


BS 7033-4:1990 Cleaning and polishing cloths -- Specification for window cleaning cloths


BS 7033-5:1990 Cleaning and polishing cloths -- Specification for general polishing cloths


BS 7044-1:1990 Artificial sports surfaces -- Classification and general introduction


BS 7076-3:1989 Dimensions of gaskets for flanges to BS 1560 -- Specification for non-metallic envelope gaskets


BS 7085:1989 Guide to safety aspects of experiments in which people are exposed to mechanical

vibration and shock

GME/21/6 current Review closed

BS 7087-1:1995 Herbs and spices ready for food use -- Specification for black and white pepper (whole and ground)


BS 7087-10:1996 Herbs and spices ready for food use -- Specification for dried mint (whole, rubbed and ground)


BS 7087-12:1992 Herbs and spices ready for food use -- Specification for dried basil (bouquets, rubbed and ground)


BS 7087-13:1992 Herbs and spices ready for food use -- Specification for turmeric (whole and ground)


BS 7087-14:1992 Herbs and spices ready for food use -- Specification for dried nutmeg and dried mace


BS 7087-15:1993 Herbs and spices ready for food use --

Specification for cinnamon (whole and ground)


BS 7087-16:1993 Herbs and spices ready for food use -- Specification for oregano (whole, rubbed and ground)


BS 7087-17:1993 Herbs and spices ready for food use -- Specification for chillies (whole and ground)


BS 7087-18:1993 Herbs and spices ready for food use -- Specification for dried rosemary (whole, rubbed and ground)


BS 7087-19:1994 Herbs and spices ready for food use. -- Specification for fennel seeds (whole and ground)



of 86

January 2021



Specification for dried thyme (whole and ground)


BS 7087-20:1995 Herbs and spices ready for food use -- Specification for dried parsley (cut, rubbed and ground)


BS 7087-22:1995 Herbs and spices ready for food use -- Specification for dried mustard seeds (whole and ground)


BS 7087-23:1995 Herbs and spices ready for food use -- Specification for dried caraway seeds (whole and ground)


BS 7087-24:1996 Herbs and spices ready for food use -- Specification for dried pimento (allspice) (whole and ground)


BS 7087-25:1996 Herbs and spices ready for food use -- Specification for dehydrated onion



Specification for dehydrated garlic


BS 7087-27:1997 Herbs and spices ready for food use -- Specification for dried sesame seeds (dehulled)


BS 7087-28:1997 Herbs and spices ready for food use -- Specification for dried tarragon (whole and ground)


BS 7087-29:1997 Herbs and spices ready for food use -- Specification for dried whole dill seed, dill leaves and ground dill


BS 7087-3:1996 Herbs and spices ready for food use -- Specification for dried sage (whole and ground)


BS 7087-6:1996 Herbs and spices ready for food use -- Specification for coriander seeds (whole and ground)



Specification for dried fenugreek (whole or ground)


BS 7087-9:1996 Herbs and spices ready for food use -- Specification for dried marjoram (whole, rubbed and ground)


BS 7088:1989 Specification for pneumatic tourniquet equipment


BS 7121-1:2016 Code of practice for safe use of cranes -- General

MHE/3/11 current Confirmation

BS 7121-14:2005 Code of practice for safe use of cranes -- Side boom pipelayers

MHE/3/11 confirmed (2016) Reconfirmation

BS 7121-2-1:2012 Code of practice for the safe use of cranes -- Inspection, maintenance and thorough examination. General

MHE/3/11 current Review closed

BS 7122:1989 Specification for welded steel tanks for the road transport of liquefiable gases

PVE/3 confirmed (2020) Review closed

BS 7134-0:1989 Testing of engineering ceramics --

Introduction and guide to sampling


BS 7141-1:1991 Narrow fabrics -- Specification for polyamide and polyolefin woven tapes and webbings


BS 7141-2:1991 Narrow fabrics -- Specification for cotton webbings for personal load carrying purposes


BS 7141-3:1990 Narrow fabrics -- Specification for wool tapes


BS 7141-4:1990 Narrow fabrics -- Specification for woven elastic webbings containing natural rubber



of 86

January 2021


BS 7141-5:1990 Narrow fabrics -- Specification for elastic

flat braids containing natural rubber


BS 7141-6:1989 Narrow fabrics -- Specification for laces for footwear and other purposes


BS 7141-7:1991 Narrow fabrics -- Specification for woven cotton tapes and webbings


BS 7144:1989 Specification for flax and jute fabrics for industrial use


BS 715:2005 Specification for metal flue boxes for gas-fired appliances not exceeding 20 kW


BS 7164-11.2:1993 Chemical tests for raw and vulcanized rubber. Butadiene rubber -- Method for determination of unsaturation


BS 7176:2007+A1:2011 Specification for resistance to ignition of upholstered furniture for non-domestic seating by testing composites


BS 7177:2008+A1:2011 Specification for resistance to ignition of mattresses, mattress pads, divans and bed

bases


BS 718:1991 Specification for density hydrometers LBI/1/2 current Review closed

BS 7190:1989 Method for assessing thermal performance of low temperature hot water boilers using a test rig


BS 7194:1990 Specification for direct-current and low-frequency electronic measuring instruments with a digital display


BS 7197:1990 Specification for performance of bonds for electric power cable terminations and joints for system voltages up to 36 kV


BS 7200:1989 Specification for synthetic-fibre needlefelts TCI/24 confirmed (2016) Reconfirmation

BS 7202:1989 Specification for non-incendive low voltage control/interlock and low voltage earth fault monitoring circuits for use in mines


BS 721-1:1963 Specification for worm gearing -- Imperial units


BS 721-2:1983 Specification for worm gearing -- Metric units


BS 7212:2016 Code of practice for the safe use of construction hoists

MHE/6 current Confirmation

BS 7251-1:1990 Orthopaedic joint prostheses -- Specification for general requirements

CH/150/4 confirmed (2016) Withdrawal

BS 7254-2:1990 Orthopaedic implants -- Specification for general requirements for materials and finish

CH/150/5 confirmed (2016) Withdrawal

BS 7254-3:1990 Orthopaedic implants -- Recommendations for care and handling


BS 7254-5:1990 Orthopaedic implants -- Specification for production of castings made of cobalt-chromium-molybdenum alloy


BS 7269-1:1991 Drycleanability of leather garments -- Specification for drycleanability and for appropriate care labels


BS 7269-2:1991 Drycleanability of leather garments -- Method for assessing drycleanability


BS 7272-2:2008+A1:2014

Writing and marking instruments -- Specification for end closures to reduce the risk of asphyxiation

TPR/1/-/2 current Review closed

BS 7288:2016 Specification for residual current devices with or without overcurrent protection for socket-outlets for household and similar uses

PEL/23/1 current Confirmation

BS 7305:1990 Method for determination of the maximum safe ironing temperature of fabrics



of 86

January 2021


BS 7318:1990 Specification for industrial sewing threads

made from linen (flax) or cotton


BS 7319-12:1990 Analysis of sodium chloride for industrial use -- Methods for determination of anti-caking additives content of salt for food use


BS 7335-1:1991 Installation of monolithic refractories -- Code of practice for installation by casting


BS 7335-2:1991 Installation of monolithic refractories -- Code of practice for installation by gunning


BS 734-1:1973 Measurement of the density of milk using a hydrometer -- Specification for hydrometers for use in milk


BS 734-2:1959 Measurement of the density of milk using a hydrometer -- Methods


BS 7344:1990 Specification for reeled low density polyethylene film for general purpose application


BS 734C:1962 Measurement of the density of milk using a

hydrometer -- % of total solids and non-fatty solids in milk corresponding to given fat content and observed density fat content range 2-6 per cent (liquid state)


BS 7363:1990 Method for bead-on-plate (BOP) test for welds

WEE/2 partially replaced by BS EN ISO 17642-2:2005

Confirmation

BS 7370-1:1991 Grounds maintenance -- Recommendations for establishing and managing grounds maintenance organizations and for design considerations related to maintenance


BS 7370-2:1994 Grounds maintenance -- Recommendations for the maintenance of hard areas (excluding sports surfaces)


BS 7370-3:1991 Grounds maintenance -- Recommendations for maintenance of amenity and functional turf (other than sports turf)


BS 7370-4:1993 Grounds maintenance -- Recommendations for maintenance of soft landscape (other than amenity turf)


BS 7370-5:1998 Grounds maintenance -- Recommendations for the maintenance of water areas


BS 7371-6:1998+A1:2011

Coatings on metal fasteners -- Specification for hot dipped galvanized coatings

FME/9/-/1 confirmed (2016) Reconfirmation

BS 7371-8:2011 Coatings on metal fasteners -- Specification for sherardized coatings

FME/9/-/1 confirmed (2016) Reconfirmation

BS 7373-1:2001 Guide to the preparation of specifications -- Guide to preparation

TPR/1/7 confirmed (2016) Reconfirmation

BS 7373-2:2001 Product specifications -- Guide to identifying criteria for a product specification and to declaring product conformity


BS 7373-3:2005 Product specifications -- Guide to identifying criteria for specifying a service

offering


BS 7383:1990 Specification for cold-pour resin-based compound for use as a filling medium in terminating cables in enclosures for voltages not exceeding 11 kV for use in coal mines


BS 7388:1991 Guide for prevention of leaks from hydraulic fluid power systems


BS 7398:1991 Specification for hand hacksaw frames MTE/15 confirmed (2016) Reconfirmation

BS 7411:1991 Specification for lever operated knapsack sprayers



of 86

January 2021


BS 7412:2007 Specification for windows and doorsets

made from unplasticized polyvinyl chloride (PVC-U) extruded hollow profiles


BS 7416:1991 Specification for precision finished seamless cold-drawn low carbon steel tubes for use in hydraulic fluid power systems


BS 7451:1991 Specification for archival quality bookbinding leather


BS 7457:1994 Specification for polyurethane (PUR) foam systems suitable for stabilization and thermal insulation of cavity walls with masonry or concrete inner and outer leaves


BS 746:2014 Specification for gas meter unions and adaptors

GSE/25 current Review closed

BS 7461:1991 Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control


BS 7462:1991 Specification for electrical safety of domestic gas appliances


BS 7476:1991 Specification for polyethylene film for covering silage


BS 7478:1991 Guide to selection and use of thermostatic radiator valves


BS 7494-1:1991 Performance and testing of teleprotection equipment of power systems. -- Specification for narrow-band command systems


BS 7505:1995 Specification for the elastic properties of flat, non- adhesive, extensible fabric bandages


BS 7523:1991 Specification for preformed cellular polyethylene (PE) materials for the thermal insulation of pipework


BS 753:1987 Schedule for density-composition tables for aqueous solutions of sulphuric acid


BS 7530-1:1992 Methods for froth flotation testing of hard coal -- Laboratory procedure


BS 7531:2006 Rubber bonded fibre jointing for industrial and aerospace purposes. Specification


BS 7533-12:2006 Pavements constructed with clay, natural stone or concrete pavers -- Guide to the structural design of trafficked pavements constructed on a bound base using concrete paving flags and natural stone slabs

B/507 confirmed (2016) Withdrawal

BS 7533-13:2009 Pavements constructed with clay, natural stone or concrete pavers -- Guide for design of permeable pavements constructed with concrete paving blocks and flags, natural stone slabs and setts and clay pavers


BS 7533-3:2005+A1:2009

Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements


BS 7533-4:2006 Pavements constructed with clay, natural stone or concrete pavers -- Code of practice for the construction of pavements of precast concrete flags or natural stone slabs


BS 7557:1992 Specification for limits of metal release from painted surfaces of articles, liable to come into contact with foodstuffs

CW/47 confirmed (2014) Review closed


of 86

January 2021


BS 7562-1:1992 Planning, design and installation of

irrigation schemes -- Glossary of terms


BS 7562-2:1992 Planning, design and installation of irrigation schemes -- Guide for acquisition of site data


BS 7562-4:1992 Planning, design and installation of irrigation schemes -- Guide to water resources


BS 7562-5:1993 Planning, design and installation of irrigation schemes -- Guide for irrigation equipment


BS 7562-6:1992 Planning, design and installation of irrigation schemes -- Guide for feasibility and implementation procedures


BS 7580-1:1997 Specification for the verification of sound level meters -- Comprehensive procedure


BS 7580-2:1997 Specification for the verification of sound level meters -- Shortened procedure for

type 2 sound level meters


BS 7586:1992 Specification for combination wrenches MTE/15 confirmed (2016) Reconfirmation

BS 7590:1992 Method for statistically estimating the volume fraction of phases and constituents by systematic manual point counting with a grid


BS 7611:1992 Specification for potato storage boxes for mechanical handling

PKW/0/-/3 current Review closed

BS 7612:1993 Specification for non-circular steel wire for mechanical springs


BS 7624:2004 Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification

GSE/30/-/20 confirmed (2016) Reconfirmation

BS 7648:1993 Specification for double braided ropes made from man-made fibre


BS 7666-5:2006 Spatial datasets for geographical referencing -- Specification for a delivery point gazetteer

IST/36 current Review closed

BS 7668:2016 Weldable structural steels. Hot finished structural hollow sections in weather resistant steels. Specification

ISE/103 current Confirmation

BS 7670-2:1997 Steel nuts and bolts for resistance projection welding -- Specification for welding of weld nuts and weld bolts


BS 770-1:1986 Methods for chemical analysis of cheese -- General introduction


BS 770-2:1976 Methods for chemical analysis of cheese -- Determination of water content (reference and routine methods)


BS 770-5:1976 Methods for chemical analysis of cheese -- Determination of pH value


BS 770-8:1987 Methods for chemical analysis of cheese -- Determination of nitrogen content (reference method)


BS 7771:1994 Code of practice for pasteurization of milk on farms and in small dairies


BS 7775:2005 Penstocks for use in water and other liquid flow applications. Specification

PSE/18/2 confirmed (2016) Reconfirmation

BS 7786:2006 Specification for unsintered PTFE tapes for general use


BS 7794:1995 Specification for square-drive sockets, driving squares and accessories for power-driven socket wrenches


BS 7797:1998 Specification for industrial duct heaters using metal-sheathed elements



of 86

January 2021


BS 7798:1998 Specification for industrial immersion

heaters using metal-sheathed elements


BS 7801:2011 Escalators and moving walks. Code of practice for safe working on escalators and moving walks


BS 7843-1:2012 Acquisition and management of meteorological precipitation data from a raingauge network -- Guide for the design, development and review of a raingauge network

CPI/113 confirmed (2016) Reconfirmation

BS 7843-2:2012 Acquisition and management of meteorological precipitation data from a raingauge network -- Code of practice for operating raingauges and managing precipitation data

CPI/113 confirmed (2016) Reconfirmation

BS 7861-2:2009 Strata reinforcement support systems components used in coal mines -- Specification for flexible systems for roof reinforcement

MRE/1 current Review closed

BS 7867:1997 Specification for portable fire extinguishers for use in aircraft


BS 7870-1:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities -- General


BS 7870-2:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities -- Methods of test


BS 7870-3.11:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated copper wire concentric cables with copper or aluminium conductors


BS 7870-3.12:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated ….... having low emission of smoke and corrosive gases when affected by fire


BS 7870-3.21:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors


BS 7870-3.22:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated ... having low emission of smoke and corrosive gases when affected by fire


BS 7870-3.40:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, copper wire waveform concentric cables with solid aluminium conductors


BS 7870-3.50:2011 LV and MV polymeric insulated cables -- Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated, …... having low emission of smoke and corrosive gases when affected by fire


BS 7870-4.10:2011+A1:2016

LV and MV polymeric insulated cables for use by distribution and generation utilities -- Single-core 11 kV to 33 kV cables (Implementation of HD 620)


BS 7870-4.11:2011+A1:2016

LV and MV polymeric insulated cables for use by distribution and generation utilities -- Single-core 33 kV lead sheathed cables (Implementation of HD 620)



of 86

January 2021


BS 7870-

4.20:2011+A1:2016

LV and MV polymeric insulated cables for

use by distribution and generation utilities -- Three-core 11 kV cables (Implementation of HD 620)


BS 7870-5:2011 LV and MV polymeric insulated cables for use by distribution and generation utilities -- Polymeric insulated aerial bundled conductors (ABC) of rated voltage 0.6/1 kV for overhead distribution


BS 787-1:1969 Specification for mining type flameproof gate-end boxes -- Gate-end boxes for direct-on-line motor starting (for use on 3-phase a.c. circuits up to 650 V)


BS 787-2:1968 Specification for mining type flameproof gate-end boxes -- Gate-end boxes with air-break circuit-breakers (for use on 3-phase a.c. circuits up to 650 volts)


BS 7872:2011 Manned security services. Cash and valuables in transit services (collection and delivery). Code of practice

GW/3 confirmed (2016) Reconfirmation

BS 787-3:1971 Specification for mining type flameproof gate-end boxes -- Gate-end boxes with lighting transformers


BS 787-4:1972 Specification for mining type flameproof gate-end boxes -- Gate-end boxes for drilling machines (for use on 3-phase a.c. circuits up to 650 V)


BS 7874:1998 Method of test for microbiological deterioration of elastomeric seals for joints in pipework and pipelines


BS 7888-4.2:2006+A1:2008

Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV -- Cables with impregnated paper insulation


BS 7895:1997 (R12) Specification for bayonet lampholders with enhanced safety

CPL/34/2 current Review closed

BS 7900:1998 Specification for examination of the surface texture of precision steel castings


BS 7909:2011 Code of practice for temporary electrical systems for entertainment and related purposes

CPW/4 confirmed (2016) Revision

BS 7917:1999 Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods


BS 7920:2005 Luminance meters. Requirements and test methods

EL/1 confirmed (2016) Reconfirmation

BS 7924:1999 Code of practice for the repair and overhaul of certified electrical apparatus intended for use in mines susceptible to firedamp


BS 7926:1998 Quantitative micrographic methods to determine the percentage content of non-metallic inclusions in cast steel


BS 7928-2:2009 Head and face protection for cricketers -- Face protectors for cricket wicket-keepers


BS 7940:1999 Analogue PSTN terminal support interface TCT/2 confirmed (2016) Reconfirmation

BS 7942:2011 Thermostatic mixing valves for use in care establishments. Requirements and test methods


BS 7944:1999 Type 1 heavy duty fire blankets and type 2 heavy duty heat protective blankets


BS 7953:1999 Entrance flooring systems. Selection, installation and maintenance



of 86

January 2021


BS 7959-2:2000 Materials used for the control of liquid

spillages -- Determination of water repellency or buoyancy for hydrophobic (oil sorbent) materials

I/- confirmed (2016) Withdrawal

BS 7960:2016 Door supervision. Code of practice GW/3 current Confirmation

BS 7969:2004 Adhesives. Ethyl and methyl cyanoacrylate types 1,2 and 3


BS 7971-11:2006 Protective clothing and equipment for use in violent situations and in training -- Foot and ankle protectors and foot protectors. Requirements and test methods


BS 7971-5:2016 Protective clothing and equipment for use in violent situations and in training -- Footwear. Requirements and test methods

PH/3/12 current Confirmation

BS 7971-6:2016 Protective clothing and equipment for use in violent situations and in training -- Gloves. Requirements and test methods


BS 7972:2001+A1:2009 Safety requirements and test methods for children's bedguards for domestic use


BS 7979:2016 Specification for limestone fines for use with Portland cement


BS 7984-1:2016 Keyholding and response services -- General recommendations for keyholding and response services

GW/3 current Confirmation

BS 7986:2005 Data quality metrics for industrial measurement and control systems. Specification


BS 7F 47:1990 Specification for cotton tape for aerospace purposes


BS 7L 37:1989 Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)


BS 8000-2.1:1990 Workmanship on building sites. Code of practice for concrete work -- Mixing and transporting concrete

B/517 partially replaced by BS 8000-0:2014

Confirmation

BS 8000-8:1994 Workmanship on building sites -- Code of practice for plasterboard partitions and dry linings

B/544 partially replaced by BS 8000-0:2014

Review closed

BS 8006-1:2010+A1:2016

Code of practice for strengthened/reinforced soils and other fills


BS 8020:2011 Tools for live working. Specification for insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V a.c. or 1500 V d.c.


BS 8102:2009 Code of practice for protection of below ground structures against water from the ground


BS 8103-1:2011 Structural design of low-rise buildings -- Code of practice for stability, site investigation, foundations, precast concrete

floors and ground floor slabs for housing


BS 8103-3:2009 Structural design of low-rise buildings -- Code of practice for timber floors and roofs for housing


BS 811:1950 Specification for cycle (B.S.C.) threads (formerly known as C.E.I. threads)


BS 812-103.2:1989 Testing aggregates. Method for determination of particle size distribution -- Sedimentation test


BS 812-104:1994 Testing aggregates -- Method for qualitative and quantitative petrographic examination of aggregates



of 86

January 2021


BS 812-109:1990 Testing aggregates -- Methods for

determination of moisture content


BS 812-110:1990 Testing aggregates -- Methods for determination of aggregate crushing value (ACV)


BS 812-111:1990 Testing aggregates -- Methods for determination of ten per cent fines value (TFV)


BS 812-112:1990 Testing aggregates -- Method for determination of aggregate impact value (AIV)


BS 812-114:1989 Testing aggregates -- Method for determination of the polished-stone value


BS 812-119:1985 Testing aggregates -- Method for determination of acid-soluble material in fine aggregate


BS 812-121:1989 Testing aggregates -- Method for determination of soundness


BS 812-123:1999 Testing aggregates -- Method for determination of alkali-silica reactivity. Concrete prism method


BS 812-124:2009 Testing aggregates -- Method for determination of frost heave


BS 8201:2011 Code of practice for installation of flooring of wood and wood-based panels


BS 8204-2:2003+A2:2011

Screeds, bases and in situ floorings -- Concrete wearing surfaces. Code of practice


BS 8204-3:2004+A2:2011

Screeds, bases and in situ floorings -- Polymer modified cementitious levelling screeds and wearing screeds. Code of practice


BS 8204-4:2004+A1:2011

Screeds, bases and in situ floorings -- Cementitious terrazzo wearing surfaces. Code of practice


BS 8204-

5:2004+A1:2011

Screeds, bases and in situ floorings --

Mastic asphalt underlays and wearing surfaces. Code of practice


BS 8204-7:2003 Screeds, bases and in-situ floorings -- Pumpable self-smoothing screeds. Code of practice


BS 8214:2016 Timber-based fire door assemblies. Code of practice


BS 8218:1998 Code of practice for mastic asphalt roofing B/546 confirmed (2016) Reconfirmation

BS 8405:2003+A1:2009 Personal protective equipment against falls from a height. Descender devices. Single-hand operated descender devices for self or assisted rescue

PH/5 current Review closed

BS 8407:2002 Specification for mechanical and spliced joints in conveyor belting for use underground


BS 8409:2009 Fully enclosed play facilities. Code of practice

SW/65 current Review closed

BS 8412:2004 Equipment for crop protection. Performance requirements for application systems used to make spatially variable applications to field crops. Specification


BS 8417:2011+A1:2014 Preservation of wood. Code of practice B/515 current Review closed

BS 8423:2010+A1:2016 Fireguards for fires and heating appliances for domestic use. Specification

CW/1 current Revision

BS 8432:2005 Spinal orthoses. Guide to design CH/168 confirmed (2016) Reconfirmation

BS 8433:2004 Microwavable personal warmers. Specification



of 86

January 2021


BS 8436:2011 Electric cables. Specification for 300/500 V

screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables


BS 8439:2005 Continuous handling equipment and systems. Guide to properties of powders and bulk materials


BS 8443:2005 Specification for establishing the suitability of special purpose concrete admixtures


BS 8447:2005 Anaesthetic and respiratory equipment. Hook-on fittings for the attachment of vaporizers to an anaesthetic gas delivery device


BS 8449:2005 Building and construction sealants with movement accommodation factors greater than 25%. Method of test for determination of adhesion/cohesion properties at variable temperatures


BS 845-1:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids -- Concise procedure


BS 8451:2004 Rubber hoses for gas welding, cutting and allied processes. High kink-resistant heavy duty welding hose (type H). Specification


BS 845-2:1987 Methods for assessing thermal performance of boilers for steam, hot water and high temperature heat transfer fluids. -- Comprehensive procedure


BS 8452:2010 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide

CPI/30/5 confirmed (2016) Reconfirmation

BS 8453:2011 Compliance framework for regulated financial services firms. Specification

SVS/6/2 confirmed (2016) Reconfirmation

BS 8454:2006 Code of practice for the delivery of training and education for work at height and rescue

PH/5 confirmed (2016) Reconfirmation

BS 8459:2005 Determination of extractable matter in textiles. Method


BS 8461:2005+A1:2009 Football goals. Code of practice for their procurement, installation, maintenance, storage and inspection

SW/136 current Review closed

BS 8466:2006 Hats. Protection against solar UVR. Method of test and performance requirements


BS 8472:2011 Methods for the assessment of the oxo-biodegradation of plastics and of the phyto-toxicity of the residues in controlled laboratory conditions


BS 8474:2013 Furniture. Chairs with electrically operated support surfaces. Requirements

FW/0/2 current Review closed

BS 8478:2011 Respiratory protective devices. Breathing gases for diving and hyperbaric applications. Requirements and test methods

PH/4/7 partially replaced by BS EN 12021:2014

Confirmation

BS 8481:2006 Design, preparation and application of internal gypsum, cement, cement and lime plastering systems. Specification


BS 8489-1:2016 Fixed fire protection systems. Industrial and commercial watermist systems -- Code of practice for design and installation

FSH/18/5 current Confirmation


of 86

January 2021


BS 8489-4:2016 Fixed fire protection systems. Industrial and

commercial watermist systems -- Fire performance tests and requirements for watermist systems for local applications involving flammable liquid fires


BS 8489-5:2016 Fixed fire protection systems…. Fire performance tests and requirements for watermist systems for the protection of combustion turbines and machinery spaces with volumes up to and including 80 m<sup>3</sup>


BS 8489-6:2016 Fixed fire protection systems. Industrial and commercial watermist systems -- Fire performance tests and requirements for watermist systems for the protection of industrial oil cookers


BS 8489-7:2016 Fixed fire protection systems. Industrial and commercial watermist systems -- Tests and requirements for watermist systems for the protection of low hazard occupancies


BS 8509:2008+A1:2011 Childrens beds for domestic use. Safety requirements and test methods

FW/0/2 confirmed (2016) Reconfirmation

BS 8513:2009 Personal fall protection equipment. Twin-legged energy-absorbing lanyards. Specification

PH/5 current Review closed

BS 8520-1:2009 Equipment used in the controlled removal of asbestos-containing materials -- Controlled wetting equipment. Specification

HS/1 current Review closed

BS 8520-2:2009 Equipment used in the controlled removal of asbestos-containing materials -- Negative pressure units. Specification


BS 8520-3:2009 Equipment used in the controlled removal of asbestos-containing materials -- Operation, cleaning and maintenance of class H vacuum cleaners. Code of practice


BS 8521:2009 Specification for dual-tone multi-frequency (DTMF) signalling protocol for social alarm systems

GW/1/12 current Review closed

BS 8522:2009 Furniture removal activities. Commercial moving services

SVS/7/2 current Confirmation

BS 8525-2:2011 Greywater systems -- Domestic greywater treatment equipment. Requirements and test methods


BS 853-1:1990+A3:2011 Specification for vessels for use in heating systems -- Calorifiers and storage vessels for central heating and hot water supply


BS 853-2:1996 Specification for vessels for use in heating systems -- Tubular heat exchangers and storage vessels for building and industrial services


BS 8532:2011 Terminal units for high flow anaesthetic gas scavenging systems. Specification for

probes and type-specific connection points


BS 8534:2011 Construction procurement policies, strategies and procedures. Code of practice


BS 8535:2011 Railway applications. Wheelsets and bogies. Powered and non-powered axles with inboard bearings. Design method

RAE/3 confirmed (2016) Reconfirmation

BS 8538:2011 Specification for the provision of services relating to the commercialization of intellectual property rights

IMS/1/1 confirmed (2016) Reconfirmation

BS 8541-2:2011 Library objects for architecture, engineering and construction -- Recommended 2D symbols of building elements for use in building information modelling



of 86

January 2021


BS 8542:2011 Calculating domestic water consumption in

non-domestic buildings. Code of practice


BS 8545:2014 Trees: from nursery to independence in the landscape. Recommendations


BS 8547:2016 Respiratory equipment. Breathing gas demand regulator used for diving to depths greater than 50 metres. Requirements and test methods


BS 8549:2016 Security consultancy. Code of practice GW/3/-/26 current Confirmation

BS 8562:2011 Gas cylinders. In situ, non-destructive examination and testing of refillable seamless steel tubes of water capacity between 150 L and 3000 L, used for compressed gases Specification

PVE/3/7 confirmed (2016) Reconfirmation

BS 8564:2011 Furniture removal activities. Overseas moving services. Specification

SVS/7/2 confirmed (2016) Reconfirmation

BS 857:1967 (R12) Specification for safety glass for land transport

AUE/1 current Review closed

BS 8574:2014 Code of practice for the management of geotechnical data for ground engineering projects


BS 8590:2014 Code of practice for the installation of audio visual equipment


BS 8592:2016 Thermosetting insulated, non-armoured, fire-resistant, single core non-sheathed cables of rated voltage 450/750 V, having low emission of smoke and corrosive gases when affected by fire. Specification


BS 8599-2:2014 First aid kits -- Specification for the contents of motor vehicle first aid kits

CH/100/-/6 current Review closed

BS 8605-1:2014 External timber cladding -- Method of specifying


BS 8607:2014+A1:2016 Mechanically operated push button locksets. Requirements and test methods


BS 8609:2014 Natural gas. Calculation of carbon dioxide emission factors from composition


BS 8611:2016 Robots and robotic devices. Guide to the ethical design and application of robots and robotic systems

AMT/10/1 current Confirmation

BS 8620:2016 Low level work platform with one working platform with side protection for use by one person with a maximum working platform height no greater than 2.5 m. Specification


BS 8660-1:2011 Gas-fired micro-cogeneration appliances of thermal input not exceeding 70 kW -- selection, installation, inspection, commissioning, servicing and maintenance of Stirling engine micro-cogeneration appliances


BS 8701:2016 Full ring ovalization test for determining the susceptibility to cracking of linepipe steels in sour service. Test method

PSE/17 current Confirmation

BS 8747:2007 Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification


BS 876:1995 Specification for hand hammers MTE/15 confirmed (2016) Reconfirmation

BS 8848:2014 Specification for the provision of visits, fieldwork, expeditions and adventurous activities outside the United Kingdom

SVS/2/5 current Review closed

BS 8877:2011 Online recruitment. Code of practice SVS/9 confirmed (2016) Reconfirmation

BS 8887-240:2011 Design for manufacture, assembly, disassembly and end-of-life processing (MADE) -- Reconditioning



of 86

January 2021


BS 8892:2014 Transition management of facility-related

services. Code of Practice

FMW/1 current Review closed

BS 8899:2016 Improvement of fire-fighting and evacuation provisions in existing lifts. Code of practice

MHE/4 current Confirmation

BS 8904:2011 Guidance for community sustainable development

SDS/2 confirmed (2016) Reconfirmation

BS 8905:2011 Framework for the assessment of the sustainable use of materials. Guidance

MI/1 confirmed (2016) Reconfirmation

BS 8909:2011 Specification for a sustainability management system for film

SCP/1/7 confirmed (2016) Reconfirmation

BS 894:1956 Specification for Ubbelohde apparatus for flow and drop points


BS 8F 35:2002 Braided linen (flax) lacing cord for aerospace purposes


BS 90:1975 Specification for direct-acting electrical recording instruments and their accessories


BS 903-5:2004 Physical testing of rubber -- Guide to the

application of rubber testing to finite element analysis


BS 903-A9:1988 Physical testing of rubber -- Determination of abrasion resistance

PRI/22 partially replaced by BS ISO 4649:2002

Confirmation

BS 9102:2014 Code of practice for safe working on lifting platforms


BS 9210 N0009-1:1978 Detail specification for radio frequency connectors (series SMC) -- Full assessment level


BS 9210 N0009-2:1978 Detail specification for radio frequency connectors (series SMC). Unsealed, soldered, captive contact, 50 ohms, screw coupling -- Control drawings. Mating face details and gauge information


BS 9210 N001-1:1975 Detail specification for radio frequency connectors (type BNC). Sealed, soldered, captive contact, 50 ohms -- Full assessment

level


BS 9210 N007-1:1976 Detail specification for radio frequency connectors (type SMB) -- Full assessment level

EPL/46 confirmed (2016) Review closed

BS 9210 N007-2:1976 Detail specification for radio frequency connectors (type SMB). Unsealed, soldered, captive contact, 50 ohms, snap-on couplings -- Control drawings. Mating face details and gauge information


BS 9220 N001:1971 Detail specification for ordinary rectangular (2:1) rigid waveguide tubing. Standard wall thickness. General application category


BS 9220 N002:1971 Detail specification for medium flat rectangular (4:1) rigid waveguide tubing. Standard wall thickness. General application category


BS 9220 N003:1971 Detail specification for flat rectangular

(8.33:1) rigid waveguide tubing. Standard wall thickness. General application category


BS 9220 N004:1971 Detail specification for circular rigid waveguide tubing. Standard wall thickness. General application category


BS 9220:1971 Specification for rigid waveguide tubing of assessed quality: generic data and methods of test


BS 9252:2011 Components for residential sprinkler systems. Specification and test methods for residential sprinklers

FSH/18/2 confirmed (2016) Reconfirmation


of 86

January 2021


BS 9263:2016 Intruder and hold-up alarm systems.

Commissioning, maintenance and remote support. Code of practice

GW/1/2 current Confirmation

BS 949-2:1992 Screwing taps -- Specification for unified ground thread taps. Manufacturing tolerances


BS 959:2008 Specification for internal micrometers (including stick micrometers)


BS 9690-1:2011 Non-destructive testing. Guided wave testing -- General guidance and principles

WEE/46/10 confirmed (2016) Reconfirmation

BS 9690-2:2011 Non-destructive testing. Guided wave testing -- Basic requirements for guided wave testing of pipes, pipelines and structural tubulars

WEE/46/10 confirmed (2016) Reconfirmation

BS 9721:1985 Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval


BS 9727:1985 Sectional specification for power

transformers of assessed quality for use in electronic equipment for capability approval


BS 9733:1985 Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval


BS 9734:1978 Sectional specification for pulse transformers of assessed quality for use in electronic equipment: full assessment level


BS 9741:1986 Sectional specification for inductors of assessed quality for use in electronic equipment for capability approval


BS 975:1987 Schedule for density-composition tables for aqueous solutions of nitric acid


BS 9751 N0001:1980 Detail specification for fixed insulated (unshielded) radio frequency inductors. Wire wound on ferrite, iron dust or phenolic cylindrical former. Full assessment level


BS 9751:1979 Blank detail specification for fixed insulated (unshielded) r.f. inductors at the full assessment level


BS 9753:1986 Sectional specification for variable r.f. type inductors of assessed quality for use in electronic equipment for capability approval


BS 976:1987 Schedule for density-composition tables for aqueous solutions of hydrochloric acid


BS 978-1:1968 Specification for fine pitch gears. -- Involute spur and helical gears


BS 978-2:1952 Specification for fine pitch gears -- Cycloidal type gears


BS 978-2:Addendum No. 1:1959

Gears for instruments and clockwork mechanisms. Cycloidal type gears. -- Double circular arc type gears


BS 984:1990 Method for determination of net mass of retail packages of knitting and rug yarns


BS 998:1990 Specification for vacuum salt for food use AW/100 confirmed (2016) Reconfirmation

BS A 22:1947 Units of measurement in civil aviation ACE/1 current

BS A 274:1981 Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa


BS A 275-A 280:1981+A2:2011

Specification for hexagon self-locking nuts with non-metallic locking inserts. Metric series


BS AU 114b:1979 Specification for strength requirements of towing brackets and coupling balls for caravans and light trailers

AUE/13 confirmed (2016) Reconfirmation


of 86

January 2021


BS AU 146b:1970 Specification for standard automatic roller-

type coupling for semi-trailers not exceeding 7$9D tons laden weight


BS AU 152:1970 Specification for rear marking plates for vehicles


BS AU 156:1971 Recommendations for aiming of headlamps and auxiliary lamps on motor vehicles


BS AU 162a:1976 Specification for headlamp optical aiming devices


BS AU 16a:1989 Specification for electrical cable connectors (17.5 A maximum continuous rating)


BS AU 175-4a:1997 Vehicle identification numbers (VIN) -- Specification for a visible vehicle identification number


BS AU 181:1982 Specification for interface dimensions for demountable vehicle body systems


BS AU 187:2000 Tow rope assemblies for towing passenger cars and light vans


BS AU 190:1983 Specification for interface dimensions and fixing bolts for the mounting of overrun devices on delta shaped drawbars of trailers up to 2000 kg


BS AU 200-1a:1984 Spray reducing devices for heavy goods vehicles -- Specification for design of containment devices


BS AU 200-2a:1984 Spray reducing devices for heavy goods vehicles -- Specification for performance of suppression material and devices, and air/water separating material and devices


BS AU 207:1986 Specification for dimensions of car radio installation space

AUE/16 confirmed (2016) Confirmation

BS AU 209-0:1996 Vehicle security -- Guide to the application of security devices/systems to vehicles


BS AU 209-1a:1992 Vehicle security -- Specification for locking systems for passenger cars and car derived

vehicles


BS AU 209-2:1988 Vehicle security -- Specification for security systems against theft of in-car equipment for entertainment and communication purposes


BS AU 209-3:1988 Vehicle security -- Specification for security marking of glazing for passenger cars and car derived vehicles


BS AU 209-4a:1995 Vehicle security -- Specification for security glazing for passenger cars and car derived vehicles


BS AU 209-5b:1996 Vehicle security -- Specification for central power locking systems for passenger cars and car derived vehicles


BS AU 209-6a:1996 Vehicle security -- Specification for dead locking systems for passenger cars and car derived vehicles


BS AU 209-7:1993 Vehicle security -- Specification for locking systems for goods vehicle driver's compartments


BS AU 209-8:1997 Vehicle security -- Specification for locking systems for goods vehicle load compartments


BS AU 210-2:1994 Drawbars for caravans and light trailers -- Specification for the design of aluminium drawbars and chassis


BS AU 217-1a:1987 Maximum road speed limiters for motor vehicles -- Specification for installed requirements



of 86

January 2021


BS AU 217-2:1989 Maximum road speed limiters for motor

vehicles -- Specification for system and component requirements


BS AU 223a:2006 Design, construction performance and marking of vehicle support stands for cars and light vans. Specification


BS AU 236:1990 Specification for circular electronic tachographs for road vehicles


BS AU 242a:1998 Automotive windscreen repair. Code of practice

AUE/1 current Revision

BS AU 24a:1989 Specification for towing connections for trailers up to 5000 kg gross mass


BS AU 25:1964 Specification for towing hook for use between trailers of 5-14 tons gross weight and towing vehicle


BS AU 26:1964 Specification for towing jaw for use between trailers of 5-16 tons gross weight and towing vehicle


BS AU 267:1998 Code of practice for breakaway cables and secondary couplings


BS AU 27:1964 Specification for towing hook for use between trailers of 5-35 tons gross weight and towing vehicle


BS AU 28:1964 Specification for towing jaw for use between trailers of 5-35 tons gross weight and towing vehicle


BS AU 29:1964 Specification for drawbar eyes and forecarriage pins for connection between trailers of 5-35 tons gross weight and towing vehicle


BS AU 2a:1970 Specification for dimensions of 3$9H - 4$9H in diameter fifth wheel king pin for use with extra heavy duty semi-trailers


BS AU 3:1970 Specification for clearance dimensions and fifth wheel positions for tractors and semi-

trailers


BS AU 30b:1970 Specification for standard automatic roller-type coupling for semi-trailers of 7 tons to 14$9L tons laden weight


BS AU 40-4a:1966 Specification for motor vehicle lighting and signalling equipment -- Sealed beam headlamps


BS AU 47:1965 Specification for advance warning triangle to indicate temporary obstructions


BS AU 50-1.8:1989 Tyres and wheels. Tyres. -- Code of practice for the storage of tyres, inner tubes and flaps


BS AU 50-2.3:1994 Tyres and wheels. Wheels and rims -- Specification for road-wheel nuts, studs and bolts for commercial vehicles


BS AU 50-2.6a:1983 Tyres and wheels. Wheels and rims -- Specification for road wheels manufactured

wholly or partly of light alloy for mopeds and motor cycles


BS AU 7a:1983 Specification for colour code for road vehicle electrical cables


BS AU 91:1965 Specification for dimensions of electrical cable connectors for starter battery taper terminal posts (cars and light commercial vehicles using positive earth system)


BS C 16:1973 Specification for dimensions for gaseous oxygen replenishment couplings for aircraft

ACE/69 replaced by BS C 20:1986

Review closed

BS C 20:1986 Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)



of 86

January 2021


BS C 3:1964 Specification for aircraft material. Coupling

dimensions for aircraft pressure re-oiling connection

ACE/1 replaced by BS C

19:1986

Review closed

BS C 6:1966 Specification for aircraft engine nacelle fire extinguisher doors


BS C 9:1970 Specification for coupling dimensions for high pressure air charging valves for aircraft


BS CECC 23200-801:1998

Harmonized system of quality assessment for electronic components. Capability detail specification: single and double-sided printed boards with plated through holes


BS CECC 41400:1980 Harmonized system of quality assessment for electronic components: sectional specification: rotary precision potentiometers

EPL/40X confirmed (1999) Reconfirmation

BS CECC 63100:1985 Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits


BS CECC 68100:1991 Harmonized system of quality assessment for electronic components. Sectional specification: quartz crystal units (capability approval)


BS CECC 90101:1980 Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL circuits, series 54, 64, 74, 84


BS CECC 90103:1983 Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL low power SCHOTTKY circuits, series 54LS, 64LS, 74LS, 84LS


BS CECC 90105:1987 Specification for harmonized system of quality assessment for electronic components. Blank detail spec: fusible link programmable bipolar read only memories, silicon monolithic integrated circuits


BS CECC 90109:1986 Specification for harmonized system of quality assessment for electronic components. Family specification. Digital integrated HC MOS circuits series HC/HCT/HCU


BS CECC 90112:1987 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. MOS read/write dynamic memories silicon monolithic circuits


BS CECC 90113:1987 Specification for harmonized system of quality assessment for electronic components. MOS ultra-violet light erasable electrically programmable read only memories silicon monolithic circuits


BS CECC 90114:1990 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: programmable logic arrays (PLA)


BS CECC 90201:1990 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage regulators



of 86

January 2021


BS CECC 90202:1990 Specification for harmonized system of

quality assessment for electronic components. Blank detail specification: integrated operational amplifiers


BS F 136:1989 Specification for pigmented chlorosulphonated polyethylene rubber-coated nylon fabric (190 g/m$u2) for aerospace purposes


BS F 143:1993 Specification for para-aramid braided cords for aerospace purposes


BS F 152:2006 Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification


BS F 153:2006 Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification


BS F 154:2006 Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification


BS F 156:2006 Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification


BS F 157:2006 Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification


BS F 159:2006 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification


BS F 162:2006 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification


BS F 164:2006 Properties of elastomeric toroidal sealing rings ("O" rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification


BS G 102:1971 Specification for general requirements for rotating electrical machinery


BS G 118:1949 Specification for aircraft magnetic compass, direct-reading


BS G 122:1949 Specification for aircraft magnetic compass, remote-reading (gyro-stabilized)


BS G 123:1949 Specification for aircraft magnetic compass, remote-reading (non-stabilized)


BS G 125:1950 Specification for turn and slip indicators for aircraft purposes


BS G 133:1951 Specification for electro-magnetic indicators for extra low voltage aircraft systems


BS G 152:1956 Specification for a.c. electrically-operated artificial horizons for aircraft


BS G 183:1963 Specification for interconnections in analogue data transmission systems in

aircraft


BS G 190:1964 Specification for cabin altimeters for aircraft ACE/1 current Review closed

BS G 211:1971 Specification for reflection-reducing coating of instrument windows and lighting wedges


BS G 226:1979 Specification for counter and pointer, servo type, pressure altimeter systems


BS G 234:1984 Specification for self-aligning air flow angle transmitters for use on aircraft


BS G 240:1988 Specification for pressure transducers for use on aircraft



of 86

January 2021


BS G 257-1:1998 Design of electromagnetic hazard

protection of civil aircraft -- Guide to theory and threats


BS G 257-2:1998 Design of electromagnetic hazard protection of civil aircraft -- Guide to protection


BS G 257-3:2004 Design of electromagnetic hazard protection of civil aircraft -- Guide to clearance and testing


BS G 264:2005 Specification for avionic data transmission interface systems. Utilities bus


BS HC 206:1975 Specification for precipitation hardening nickel base chromium-cobalt-molybdenum-titanium alloy precision castings (Cr 20, Co 20, Mo 6, Ti 2)


BS HC 301:1973 Specification for cobalt base chromium-nickel-tungsten alloy castings (Cr 25.5, Ni 10.5. W 7.5)


BS L 102:1971 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)


BS L 105:1971 Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)


BS L 111:1971 Specification for bars and extruded sections of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)

ACE/61/-/24 replaced by BS EN 2326:1992

Confirmation

BS L 112:1971 Specification for forging stock and forgings of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)


BS L 114:1971 Specification for tube of aluminium-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (not exceeding 10 mm wall thickness) (suitable for welding) (Mg 0.8, Si 1, Mn 0.7)


BS L 117:1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: not tested hydraulically) (not exceeding 10 mm thicknes) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)


BS L 118:1975 Specification for tube of aluminium-magnesium-silicon-copper-chromium alloy (solution treated and artificially aged: tested hydraulically) (not exceeding 10 mm thickness) (Mg 1.0, Si 0.6, Cu 0.28, Cr 0.2)


BS L 119:1975 Specification for ingots and castings of aluminium-copper-nickel-manganese-titanium-zirconium-cobalt-antimony alloy (Cu 5.0, Ni 1.5, Mn 0.25, Ti 0.2, Zr 0.2, Co 0.2, Sb 0.2)


BS L 154:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and aged at room temperature) (Cu 4, Si 1)


BS L 155:1977 Specification for ingots and castings of aluminium-copper-silicon alloy (solution treated and artificially aged) (Cu 4, Si 1)



of 86

January 2021


BS L 160:1976 Specification. Bars and extruded sections of

aluminium-zinc-magnesium-copper-chromium alloy (solution treated and artificially aged to an overaged condition) (Zn 5.6, Mg 2.5, Cu 1.6, Cr 0.22)


BS L 167:1978 Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)


BS L 168:1978 Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)


BS L 171:1990 Specification for forging of aluminium-zinc-magnesium-manganese-copper alloy (not exceeding 150 mm diameter or minor sectional dimension) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)


BS L 172:1989 Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)


BS L 173:1991 Specification for castings of aluminium-silicon-magnesium alloy, chill cast (solution treated and precipitation treated to an overaged (T7) condition)


BS L 174:1991 Specification for castings of aluminium-silicon-magnesium alloy, sand cast (solution treated and precipitation treated to an overaged (T7) condition)


BS L 513:1973 Specification for forging stock and forgings of magnesium-6% aluminium-zinc alloy (Al

6.0, Zn 1.0)


BS M 22:1949 Specification for silica gel acid activated for aircraft purposes


BS M 32:1969 Specification for dimensions of aircraft accessory drives and mounting pads


BS M 34:1970 Method of preparation and use of radiographic techniques


BS M 36:1970 Method for ultrasonic testing of special forgings by an immersion technique using flat-bottomed holes as a reference standard


BS M 37:1970 Method for the etch inspection of metallic materials and components


BS M 38:1971 Guide to compilation of instructions and reports for the in-service non-destructive testing of aerospace products


BS M 39:1972 Method for penetrant inspection of aerospace materials and components


BS M 40:1972 Methods for measuring coating thickness by non-destructive testing


BS M 42:1972 Methods for non-destructive testing of fusion and resistance welds in thin gauge materials


BS M 43:1973 Methods of zoning aircraft and referencing access doors and panels


BS M 44:1974 Specification for identification of aircraft servicing, maintenance, ground handling and safety/hazard points


BS M 93:2005 Protection of magnesium-rich alloys against corrosion. Specification



of 86

January 2021


BS MA 18:1973 Specification for salt water piping systems

in ships

SME/32 confirmed (2016) Reconfirmation

BS MA 25:1973 Specification for ships' windows SME/32 current Review closed

BS MA 78:1978 Specification for aluminium shore gangways SME/32 confirmed (2016) Reconfirmation

BS MA 81:1980 Specification for ships' derrick fittings MHE/3/3 current Review closed

BS PL 4:2005 Properties of unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Specification


BS PL 5:2005 Unsaturated polyester resins for low pressure laminating of high strength fibre reinforced composites. Test methods


BS PL 6:2005 Properties of unsaturated polyester resins for low pressure laminating of glass fibre reinforced composites. Specification


BS PL 7:2005 Unsaturated polyester resins for low pressure laminating of glass fibre reinforced laminates. Test methods


BS PL 8:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Specification


BS PL 9:2005 Fibrous polyamide material for use as an explosion suppressant and as a baffle material in aircraft fuel tanks. Test methods


BS QC 960101:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for rotary switches


BS QC 960301:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for sensitive switches


BS QC 960401:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in pushbutton switches


BS QC 960501:1992 Specification for harmonized system of quality assessment for electronic components. Blank detail specification: electromechanical switches for use in electronic equipment or in-line package switches


BS S 153:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (1230-1430 MPa: limiting ruling section 40 mm)


BS S 154:1976 Specification. 2$9H% nickel-chromium-molybdenum steel billets, bars, forgings and parts (880-1080 MPa: limiting ruling

section 150 mm)


BS S 155:1976+A1:2016 Specification for nickel-silicon-chromium-molybdenum-vanadium steel (vacuum arc remelted) billets, bars, forgings and parts (1900-2100 MPa: limiting ruling section 75 mm)


BS S 156:1976 Specification for 4% nickel-chromium-molybdenum case-hardening steel (vacuum arc remelted) billets, bars, forgings and parts (1320-1520 MPa)


BS S 157:1976 Specification. 3% nickel-chromium-molybdenum case-hardening steel billets, bars, forgings and parts (1180-1380 MPa)



of 86

January 2021


BS S 158:1977 Specification for 1% chromium-

molybdenum steel bars for the manufacture of forged bolts and forged nuts


BS S 159:1981 Specification for 12% chromium-nickel-molybdenum-vanadium heat-resisting steel bars for the manufacture of fasteners (1100-1300 MPa: limiting ruling section 50 mm)


BS S 160:1990 Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 18, Ni 10.5, controlled nitrogen content)


BS S 161:1990 Specification for chromium-nickel-molybdenum corrosion-resisting steel. Bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 17.5, Ni 12.5, Mo 2.25, controlled nitrogen content)


BS S 163:1990 Specification for nickel-chromium-molybdenum-vanadium steel forging stock, forgings, bars and parts (1900 MPa : limiting ruling section 100 mm)


BS SP 10 & 11:1949+A3:2011

Specification for washers for aircraft purposes (primarily for facing purposes)


BS SP 122 TO 125:2016 Washers for unified hexagons for aircraft (primarily for packing purposes)


BS SP 126 & 127:1959+A3:2011

Washers for unified hexagons for aircraft (primarily for facing purposes)


BS SP 13; 14; 15 and 16:1949+A4:2011

Specification for washers for aircraft purposes. (primarily for packing purposes)


BS SP 55 and SP 56:1953+A3:2016

Specification for washers, spring, double coil (inch sizes), steel, cadmium plated and phosphor bronze. For aircraft


BS SP 57 and 58:1955+A3:2011

Specifications for Rivet burrs for aircraft ACE/12 confirmed (2016) Reconfirmation

BS SP 76:1958 Snap head steel rivets for aircraft ACE/12 confirmed (2016) Reconfirmation

BS SP 86:1959 100$0D countersunk head steel rivets for aircraft


BS X 36:1998 Specification for paint remover for air drying selectively removable paint scheme for aerospace purposes


BS X 37:2004 Intumescent paint for aerospace purposes. Specification


NA to BS EN 1990:2002+A1:2005

UK National Annex for Eurocode. Basis of structural design


NA to BS EN 1991-1-1:2002

UK National Annex to Eurocode 1. Actions on structures -- Densities, self-weight, imposed loads for buildings-COPY


NA to BS EN 1991-1-2:2002

UK National Annex to Eurocode 1. Actions on structures -- Actions on structures exposed to fire


NA to BS EN 1991-1-4:2005+A1:2010

UK National Annex to Eurocode 1. Actions on structures -- Wind actions


NA to BS EN 1991-1-5:2003

UK National Annex to Eurocode 1. Actions on structures -- Thermal actions


NA to BS EN 1991-1-6:2005

UK National Annex to Eurocode 1. Actions on structures -- Actions during execution


NA to BS EN 1991-3:2006

UK National Annex to Eurocode 1. Actions on structures -- Actions induced by cranes and machinery


NA to BS EN 1991-4:2006

UK National Annex to Eurocode 1. Actions on structures -- Silos and tanks


NA to BS EN 1992-1-2:2004

UK National Annex to Eurocode 2. Design of concrete structures -- Structural fire design



of 86

January 2021


NA to BS EN 1992-

2:2005

UK National Annex to Eurocode 2. Design

of concrete structures -- Concrete bridges. Design and detailing rules


NA to BS EN 1992-3:2006

UK National Annex to Eurocode 2. Design of concrete structures -- Liquid retaining and containment structures


NA to BS EN 1993-1-10:2005

National Annex (informative) to Eurocode 3. Design of steel structures -- Material toughness and through thickness properties


NA to BS EN 1993-1-11:2006

UK National Annex to Eurocode 3. Design of steel structures -- Design of structures with tension components


NA to BS EN 1993-1-12:2007

UK National Annex to Eurocode 3. Design of steel structures -- Additional rules for the extension of EN 1993 up to steel grades S 700


NA to BS EN 1993-1-2:2005

UK National Annex to Eurocode 3. Design of steel structures -- Structural fire design


NA to BS EN 1993-1-3:2006

UK National Annex to Eurocode 3. Design of steel structures -- Supplementary rules for cold-formed members and sheeting


NA to BS EN 1993-1-8:2005

UK National Annex to Eurocode 3. Design of steel structures -- Design of joints


NA to BS EN 1993-1-9:2005

UK National Annex to Eurocode 3. Design of steel structures -- Fatigue


NA to BS EN 1993-3-1:2006

UK National Annex to Eurocode 3. Design of steel structures -- Towers and masts


NA to BS EN 1993-6:2007

UK National Annex to Eurocode 3. Design of steel structures -- Crane supporting structures


NA to BS EN 1994-1-1:2004

UK National Annex to Eurocode 4. Design of composite steel and concrete structures -- General rules and rules for buildings


NA to BS EN 1994-1-2:2005

UK National Annex to Eurocode 4. Design of composite steel and concrete structures -

- Structural fire design


NA to BS EN 1994-2:2005

UK National Annex to Eurocode 4. Design of composite steel and concrete structures -- General rules and rules for bridges


NA to BS EN 1995-1-2:2004

UK National Annex to Eurocode 5. Design of timber structures -- Structural fire design


NA to BS EN 1995-2:2004

UK National Annex to Eurocode 5. Design of timber structures -- Bridges


NA to BS EN 1996-1-2:2005

UK National Annex to Eurocode 6. Design of masonry structures -- General rules. Structural fire design


NA to BS EN 1996-2:2006

UK National Annex to Eurocode 6. Design of masonry structures -- Design considerations, selection of materials and execution of masonry


NA to BS EN 1997-2:2007

UK National Annex to Eurocode 7. Geotechnical design -- Ground investigation

and testing


NA to BS EN 1998-1:2004

UK National Annex to Eurocode 8. Design of structures for earthquake resistance -- General rules, seismic actions and rules for buildings


NA to BS EN 1998-2:2005

UK National Annex to Eurocode 8. Design of structures for earthquake resistance -- Bridges


NA to BS EN 1998-4:2006

UK National Annex to Eurocode 8. Design of structures for earthquake resistance -- Silos, tanks and pipelines



of 86

January 2021


NA to BS EN 1998-

5:2004

UK National Annex to Eurocode 8. Design

of structures for earthquake resistance -- Foundations, retaining structures and geotechnical aspects


NA to BS EN 1998-6:2005

UK National Annex to Eurocode 8. Design of structures for earthquake resistance -- Towers, masts and chimneys


NA to BS EN 1999-1-1:2007+A1:2009

UK National Annex to Eurocode 9. Design of aluminium structures -- General structural rules


NA to BS EN 1999-1-2:2007

UK National Annex to Eurocode 9. Design of aluminium structures -- Structural fire design


NA to BS EN 1999-1-3:2007+A1:2011

UK National Annex to Eurocode 9. Design of aluminium structures -- Structures susceptible to fatigue


NA to BS EN 1999-1-4:2007

UK National Annex to Eurocode 9. Design of aluminium structures -- Cold-formed structural sheeting


NA to BS EN 1999-1-5:2007

UK National Annex to Eurocode 9. Design of aluminium structures -- Shell structures


NA+A1:15 to BS EN 1993-1-4:2006+A1:2015

UK National Annex to Eurocode 3: Design of steel structures. -- General rules. Supplementary rules for stainless steels


NA+A1:2012 to BS EN 1993-2:2006

UK National Annex to Eurocode 3. Design of structures -- Steel bridges


NA+A1:2012 to BS EN 1993-5:2007

UK National Annex to Eurocode 3: Design of steel structures -- Piling


NA+A1:2014 to BS EN 1993-1-1:2005+A1:14

UK National Annex to Eurocode 3. Design of steel structures -- General rules and rules for buildings


NA+A1:2014 to BS EN 1996-3:2006

UK National Annex to Eurocode 6. Design of masonry structures -- Simplified calculation methods for unreinforced masonry structures


NA+A1:2014 to BS EN 1997-1:2004+A1:2013

UK National Annex to Eurocode 7. Geotechnical design -- General rules


NA+A1:2014 to BSEN1991-1-7:2006+A1:2014

National Annex to Eurocode 1. Actions on structures -- Accidental actions


NA+A1:2016 to BS EN 1993-1-5:2006

UK National Annex to Eurocode 3. Design of steel structures -- Plated structural elements


NA+A2:14 to BS EN 1992-1-1:2004+A1:2014

UK National Annex to Eurocode 2. Design of concrete structures -- General rules and rules for buildings


PAS 24:2016 Enhanced security performance requirements for doorsets and windows in the UK. Doorsets and windows intended to offer a level of security suitable for dwellings and other buildings exposed to comparable risk

B/538/1 current Reconfirmation

PD 54823:2016 Guidance for the design, commissioning and maintenance of LPG systems in small craft

GME/33 current Confirmation

PD 6446:1970 Recommendations for the co-ordination of dimensions in building. Combinations of sizes


PD 6484:1979 Commentary on corrosion at bimetallic contacts and its alleviation

ISE/NFE/8 confirmed (2016) Reconfirmation

PD 6490:1980 Guide to application of additional symbols (and index) for machine tools



of 86

January 2021


PD 6513:1985 Magnetic particle flaw detection. A guide to

the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072


PD 6525-1:1990 Elevated temperature properties for steels for pressure purposes. -- Stress rupture properties


PD 6545:2005 Intended use of human head and ear simulators-guide


PD 6635:1999 Non-alloy steel rod for drawing and/or cold rolling. General purpose rod, rimmed and rimmed substitute low carbon steel rod, rod for special applications. Requirements and tests

ISE/106 confirmed (2016) Withdrawal

PD 6663:2000 Guidelines to BS EN 12973. Value management. Practical guidance to its use and intent

DS/1 confirmed (2016) Reconfirmation

PD 6682-3:2003 Aggregates -- Aggregates for mortar. Guidance on the use of BS EN 13139


PD 6682-4:2003 Aggregates -- Lightweight aggregates for concrete, mortar and grout. Guidance on the use of BS EN 13055-1


PD 6682-5:2005 Aggregates -- Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications. Guidance on the use of BS EN 13055-2


PD 6682-8:2004 Aggregates -- Aggregates for railway ballast. Guidance on the use of BS EN 13450


PD 6682-9:2003 Aggregates -- Guidance on the use of European test method standards


PD 6688-1-1:2011 Recommendations for the design of structures to BS EN 1991-1-1


PD 6688-1-7:2009+A1:2014

Recommendations for the design of structures to BS EN 1991-1-7


PD 6688-2:2011 Background to the National Annex to BS EN 1991-2 -- Traffic loads on bridges


PD 6691:2015+A1:2016 Guidance on the use of BS EN 13108, Bituminous mixtures. Material specifications

B/510/1 current Revision


CB/203 current Review closed



PD 6698:2009 Recommendations for the design of structures for earthquake resistance to BS EN 1998


PD 6699-1:2007 Nanotechnologies -- Good practice guide for specifying manufactured nanomaterials

NTI/1 current Review closed

PD 6699-2:2007 Nanotechnologies -- Guide to safe handling and disposal of manufactured nanomaterials

NTI/1 current Review closed

PD 6703:2009 Structural bearings. Guidance on the use of structural bearings


PD 6705-3:2009 Structural use of steel and aluminium -- Recommendations for the execution of aluminium structures to BS EN 1090-3


PD 68888:2011 Objectives and learning outcomes for BS 8888 training


PD 7501:2003 Managing culture and knowledge. Guide to good practice

KMS/1 confirmed (2016) Reconfirmation

PD 7502:2003 Guide to measurements in knowledge management



of 86

January 2021


PD 7503:2003 Introduction to knowledge management in

construction


PD 7504:2005 Knowledge management in the public sector. A guide to good practice


PD 7505:2005 Skills for knowledge working. A guide to good practice


PD 7506:2005 Linking knowledge management with other organizational functions and disciplines. A guide to good practice


PD 7974-4:2003 Application of fire safety engineering principles to the design of buildings -- Detection of fire and activation of fire protection systems. (Sub-system 4)

FSH/24 proposed for withdrawal (2019)

Reconfirmation

PD 8010-1:2015+A1:2016

Pipeline systems -- Steel pipelines on land. Code of practice

PSE/17/2 current Confirmation

PD 8010-2:2015+A1:2016

Pipeline systems -- Subsea pipelines. Code of practice

PSE/17/2 current Confirmation

PD 970:2005 Wrought steels for mechanical and allied

engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels


bs identifier bs title committee status final review outcome

Documents