brochure rm uk
TRANSCRIPT
-
8/12/2019 Brochure Rm Uk
1/12
1
-
8/12/2019 Brochure Rm Uk
2/12
2
INTRODUCTIONThe increasing capabilities of magnetic resonance (MR) studies to impact medical diagnosis and prognosis has dramatically incre-ased the number of MR procedures performed worldwide. Many more patients, especially those in high-risk or special populationgroups, are undergoing MR examinations for an ever-widening spectrum of medical indications.
For this reason Radioprotex s.r.l., a company that is highly specialized in radioprotection and that has earned a great experiencein Resonance Magnetic Imaging, has developed and manufactured a new range of basic patient management accessories andequipment for MR environments, all manufactured with high quality materials, such as stainless steel AISI 316. All ourequipment meets the strictest requirements for use in imaging facilities including the new high-eld 3 Tesla MRI systems, in orderto ensure the maximum safety both for patients and operators in MR environments and help to create a more efcient and moreprotable MR center.
-
8/12/2019 Brochure Rm Uk
3/12
3
CONTENTS
NON MAGNETIC ACCESSORIES
FOR MAGNETIC RESONANCE IMAGING 3
Non magnetic adjustable height stretcher 4
Non magnetic wheelchair 5
Non magnetic trolley 6
Non magnetic over - couch trolley 6 Non magnetic pole 7
Non magnetic extinguisher 8
Multi purpose anesthetics trolley 8
Non magnetic double step stool 9
Non magnetic sthetoscope
with single duct tube 10
Non magnetic laryngoscope 10
-
8/12/2019 Brochure Rm Uk
4/124
HIGH QUALITYNON MAGNETIC
ACCESSORIES BY
-
8/12/2019 Brochure Rm Uk
5/12
5
M.R. stretcher
Completely non magnetic adjustable height stretcher, made of aluminum and stainless steel, for a fully safe use in MR departments up to 3 Tesla.
This stretcher is very easy to manouvre and well suited to tight spaces. The height is adjustable from 540 mm up to 920 mm. A lifting system with double
pantograph hydraulic pistons and double pedals makes this stretcher simple to use both from the left hand and the right hand side.
The stretcher is equipped with a comfortable mattress and four swivel casters, all with stationary brake. The stretcher also has 4 rubber bumpers at the cor-ners.
Adjustable backrest and side rails, equipped with safety locks. On the top side of the stretcher it is possible to hook up a drip pole on both the left hand side
and the right hand side..
The stretcher is classied as medical device and complies with the Directive 93/42 CEE. The stretcher RM009 has been tested and proven to be totally made
of non magnetic materials and MRI compatible up to 3 Tesla (test carried out by the C.N.A.O. Foundation, in Pavia, Italy, by MRI Safety Expert and Medical
Physicist; test available on request).
Code RM106Stretcher pole, in stainless steel AISI 316
Code RM009MRS
AFETO
3TESLA
SPECIFICATIONS:
Overall dimensions:185x67x54/92 H cm(Optional lenghtextension up to 200 cm)
Height: 540/920 mm Weight: 50 kg. Capacity: up to 200 Kg.
OPTIONAL ACCESSORIES:
-
8/12/2019 Brochure Rm Uk
6/12
6
M.R. wheelchair
Non magnetic wheelchair
AISI 316 tubular stainless steel non-magnetic wheelchair. Padded, wide seat and comfortable backrest. Four 80mm non magnetic castors, the two back oneshave a stationary brake. On either armrest it is possible to hook up a drip pole for the drip.
Folding footrest with non slip surface, made of non magnetic stainless steel.
The wheelchair is classied as medical device and complies to the Directive 93/42 CEE. It has been tested and proven to be totally made with non magnetic
materials and MRI compatible up to 3 Tesla (test carried out by the C.N.A.O. Foundation, in Pavia, Italy, by MRI Safety Expert and Medical Physicist; test
available on request).
SPECIFICATIONS: Overall dimensions: 700 x 550 x 900 mm Height: 900 mm
Weight: 15 kg. Capacity: 120 Kg.
Code RM018
-
8/12/2019 Brochure Rm Uk
7/12
7
M.R. trolley
Made entirely of AISI 316 18/10 tubular stainless steel and is
tted with four totally non magnetic castors. Removable and ro-
table stainless steel tray with rounded edges, easy to clean.
Manually height adjustable from 830 mm to max 1.250 mm
SPECIFICATIONS: Overall dimensions: 760x520x830 h mm
Tray dimensions: 700 x 450 x 200 h mm
Weight: 12 kg.
Wheels: 60 mm anti static, non magnetic, with bumpers
The trolley RM115 is classied as medical device and complies
to the Directive 93/42 CEE. It has been tested and proven to be
totally made of non magnetic materials and MRI compatible up
to 3 Tesla (test carried out by the C.N.A.O. Foundation, in Pavia,
Italy, by MRI Safety Expert and Medical Physicist; test availableon request).
Non magnetic trolley Non magnetic over - couch trolley
AISI 316 18/10 tubular stainless steel non magnetic trolley. The
two shelves are made of square tubular stainless steel (20x20
mm) with rounded edges, and are both removable for an easy
cleaning and disinfection.
The trolley RM001 is classied as medical device and compliesto the Directive 93/42 CEE. It has been tested and proven to be
totally made of non magnetic materials and MRI compatible up
to 3 Tesla (test carried out by the C.N.A.O. Foundation, in Pavia,
Italy, by MRI Safety Expert and Medical Physicist; test available
on request).
.SPECIFICATIONS: Overall dimensions: 80,5 x 50,5 x 90 h cm
Weight: 4 kg.
Capacity: 50 Kg each shelf Wheels: non magnetic and anti static,
diameter 80 mm
Code RM001
Code RM115
MRSAFE
TO
3TESLA
-
8/12/2019 Brochure Rm Uk
8/12
8
M.R. pole
Non magnetic AISI 316 18/10 stainless steel stand drip stand for hypodermoclysis. Fixed tube 28 mm, extension tube 20 mm.
Extension pole with manual regulation and lock. Four welded hooks in stainless steel. Five spoke base with anti static and non ma-gnetic castors.
The non magnetic pole RM015 is classied as medical device and complies to the Directive 93/42 CEE. It has been tested and proven
to be totally made of non magnetic materials and MRI compatible up to 3 Tesla (test carried out by the C.N.A.O. Foundation, in Pavia,
Italy, by MRI Safety Expert and Medical Physicist; test available on request).
SPECIFICATIONS:
Overall Dimensions: 60 mm
Extension pole diameter: 20 mm
Height: 150 up to 280 H mm
Capacity: 20 Kg Wheight: 5 Kg
Non magnetic pole
Code RM015
TOP
BOTTOM
MRSAFE
TO
3TESLA
-
8/12/2019 Brochure Rm Uk
9/12
9
M.R. extinguisher, trolley
Code RM112
Non-magnetic 5 kg CO2 re extinguisher, fully non magnetic.
It complies with the Directive 97/23/EC on pressure equipment
and European Standard EN 3.
This antimagnetic extinguisher is used especially to protect elec-
tronic equipment in areas where sensitive measuring and scan-
ning equipment is located (hospitals). The range is also suitable
for extinguishing burning liquid (class B res).
It has been tested and proven to be totally made of non magnetic
materials and MRI compatible up to 3 Tesla.
SPECIFICATIONS:
Dimensions: 350x670H mm
Weight: kg 14
Code RM134
MRSAFE
TO
3TESLA
Multi purpose anesthetics trolleyNon magnetic extinguisher
Useful to store MR tools and instruments, this kind of cart is
useful to store objects and instruments in MRI rooms. Built en-
tirely in AISI 304 18/10 stainless steel, and equipped with four
totally non magnetic castors.
It can have four or six sliding drawers, placed on the left side,made of AISI 304 stainless steel , sliding on stainless steel guides
with mechanical block. On the right there is a vertical storage
compartment with xed shelf and door with lock.
The top part can be used to lay down instruments or objects and
it is made of stainless steel.
This trolley is classied as medical device and complies with the
Directive 93/42 CEE.
SPECIFICATIONS:
Overall dimensions: 60 x 40 x 110 h cm Drawer Dimensions: 26 x 35 x 7h
Weight: 42 kg.
Wheels: non magnetic revolving castors 80 mm
-
8/12/2019 Brochure Rm Uk
10/12
10
M.R. stool, sthetoscope
The double step stool is manufactured in AISI 304 18/10 tubular
stainless steel.
The steps are covered with non slip rubber. Step sizes are 40 x 25cm. The step stool also has a very ergonomic support handle for
safety.
On request, This model can be modied according to the custo-
mer needs.
SPECIFICATIONS:
Overall dimensions: 40 x 44 x 45 H cm
Height: 45 cm
Capacity: Kg. 150Kg
Frame: Stainless steel
Non magnetic double step stool
Code RM122
This non magnetic sthetoscope is very light and has a non-chilling contact
diaphragm of high sensitivity. This unit has been designed exclusively for
use in high magnetic fields.
THE MATERIAL:
The bell is made of anodized aluminum;
Earpiece: Brass, chrome-plated
Yoke spring: CuBe, chrome-plated
Ear buds: TPE/TPS, hard, colour: dark greyMembrane: boPET (Hostaphan RN 250), 0.25 mm thick
Moulded tube: Soft PVC, latex-free, resistant against common cleaners and
disinfectants
The OVERALL DIMENSIONSare the following:
Overall length: 730 mm
Tube length: 555 mm
Earpiece length/: 150 mm / 5 mm
Weight: 104 g.
The sthetoscope is classified as medical device and complies with the Direc -
tive 93/42 CEE and MRI compatible up to 3 Tesla.
Non magnetic sthetoscope with single duct tube
Code RM124
h l
-
8/12/2019 Brochure Rm Uk
11/12
11
M.R. sphygmomanometer, laryngoscope
Non magnetic sphygmomanometer
The sphygmomanometer for Magnetic Resonance, designed to be totally non-magnetic, features
a modern and functional design completed with an accurate gauge of high quality. The device
is easy to use and easy to handle, ensuring a high durability. The absence of latex, avoids the
potential allergies and the structure is made of shock-absorbing material.
The presence of a micro lter protects the valve and the large insufator and can be positioned
at both right and left. The blood pressure monitor is not with mercury and comes with adult
cuff. This device is available on request with other bracelets measures for infants, children and
adolescents.
The sphygmomanometer is classied as medical device and complies with the Directive 93/42
CEE and MRI compatible up to 3 Tesla.
SPECIFICATIONS:
Material:
Gauge: polycarbonate
Valve: Brass Chrome
pointer: aluminum
Glass: special synthetic material, unbreakable, resistant to alcohol and disinfectants
inator: PVC
DIMENSIONS::
Case: 62 mm x 30 mm h
Overall length: 170 mm
WEIGHT: gauge only 125 g
Complete with standard cuff for adults: 215 g
Code RM128
This tool is completely non-magnetic and consists of two
parts: the ber optic handle and bulb. It has a battery and
different kinds of blades: straight blades, curved blades
or Miller Mc Intosh.
Among the standard blades there are:
AM MAC: 0, 1, 2, 3, 3.5, 4
ENG MAC: 1, 2, 3, 4
MILLER 0, 1, 2, 3, 4
The Fiber Optic Laryngoscope Handle was tested safe to
3.0 Tesla static magnetic eld.
Code RM127
2 low magnetic eld batteries (not included)
Non magnetic laryngoscope
Code RM125
-
8/12/2019 Brochure Rm Uk
12/12
12
Via Balduccio da Pisa 12
20139 Milano
VAT NUMBER: IT 07909700960
Phone +39 02 8719 7147
Fax + 39 02 8715 2393
www.radioprotex.it