brochure lineaire en - plafometal.com · linear strip with round edges on semi-concealed grid...
TRANSCRIPT
LINEAR CEILINGS
IDEAL FOR LOBBIES,
OUTDOOR CANOPIES, ETC.
S Y S T E M B R O C H U R E
Customized solutions possible with each system
AESTHETICS� Ceiling finish� Personalized linear appearance
(variations in widths, heights and gaps)� Long length possible� Wide range of finishes available
PRACTICAL� Easy to install� Can be disassembled� Outdoor installation under certain conditions
A Saint-Gobain brand
Systems of linear aluminum strips clipped under carriers for a customizable and stylish linear appearance (colors, dimensions, finishes, etc.).
LINEAR STRIP
Discover the two types of linear ceilings available from Plafometal and check out the details of each system on the following pages.
LINEAR PANEL
Ideal for outdoor structures
Long length
Easy to install (wide center spacings)
Systems of linear panels clipped under carriers for finishing indoor and outdoor ceilings. Panels of different widths can be combined thanks to the carriers without any interval requirements.
NEW
2System brochure
Light reflection Up to 87%
Reaction to fire according to EN 13501-1 A1
Perforations Perforations available, except type V strips. Contact us.
ColorsStandard White (RAL 9003) - Prepainted polyester Metallic Gray (RAL 9006) - Prepainted polyester Structured Textured White (RAL 9003)* - Prepainted polyurethane and polyamide Structured Textured Gray (RAL 9006)* - Prepainted polyurethane and polyamide Others colors, brushed, anodized and imitation wood on request Refer to the color chart available on the website*Recommended for type R, U and F strips used outdoors
LINEAR PANEL2� LINEAR STRIP
�
LINEAR STRIPN
� Round edges
� Outdoors: can be installed beneath canopies under certain conditions
LINEAR STRIP WITH ROUND EDGES ON SEMI-CONCEALED
GRID SYSTEMTYPE R
[ PLAFOMETAL-LC-110 ]
� Closed overlapping edges
� Concealed grid� Outdoors: can be
installed beneath canopies under certain conditions
CLOSEDLINEAR STRIP
ON CONCEALED GRID SYSTEM
TYPE F[ PLAFOMETAL-LC-130 ]
�
� heights available
� possibilities (combination
heights)� Possibility of
(Fortilux)� Outdoors: can be installed
beneath canopies under certain conditions
LINEAR STRIP WITH STRAIGHT EDGES ON SEMI-CONCEALED
GRID SYSTEMTYPE U
[ PLAFOMETAL-LC-120 ]
SELECTION GUIDEChoose the system best suited to your needs and the configuration for your linear ceiling.
Check out all the details in each system datasheet.
� Vertical appearance� Conceals the plenum
when viewed at an angle, while creating an impression of space and light
� High open area percentage for active fire protection systems
� available
VERTICAL STRIP ON SEMI-CONCEALED
GRID SYSTEM
TYPE V[ PLAFOMETAL-LC-140 ]
3System brochure
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: lobbies.
Description
� Linear strips on a semi-concealed grid with notches.
� The strip has rounded edges.
� The open gap between strips can be 5 or 15 mm.
� Inter-strip profiles can be used to conceal the 15-mm gaps or create a closed hollow joint.
Dimensions in mm
1585
42
Module 10015 85
42
Module 90515
Carrier with a 15-mm gap 85R strip
Carrier with a 5-mm gap 85R strip
TYPE RLINEAR STRIP WITH ROUND EDGES ON SEMI-CONCEALED GRID SYSTEM
Option: cover for light fixtures
These visuals are available in greater detail on our web site in the "System visuals" section
LINEAR PANEL2� LINEAR STRIP
Option: gap cover at the bottom
Option: flush gap cover
4System brochure
Light reflectionUp to 87%
Opening Unclip each strip by freeing it from the notches on the carrier.
Reaction to fire according to EN 13501-1 Euroclass A1
Cut-outs and integration On-site cut outs. Specific covers for spotlights, sprinklers or other fittings on one or more strip modules are available on request.
Indoor air quality Class A+
ColorsStandard White (RAL 9003) - Prepainted polyester Metallic Gray (RAL 9006) - Prepainted polyester Structured Textured White (RAL 9003)* - Prepainted polyurethane and polyamide Structured Textured Gray (RAL 9006)* - Prepainted polyurethane and polyamide Others colors, brushed, anodized and imitation wood on request Refer to the color chart available on the website*Recommended for type R, U and F strips used outdoors
� Aesthetics: soft linear appearance � long length possible � Installation: easy to fit
KEY FEATURES U
* Refer to the product datasheet
SYSTEM INFORMATION
ComponentWidth Height Gap Length
Type R strip* 85R 85 15 5 or 15
On request.Recommended dimen-sions between 900 and
6,000 mm*
Aluminumthickness 0.5 or
0.6 mm
Wall angle or
Channel trim
40x20 Lg. 3,000 Aluminum
16x16x14 Lg. 3,000 Aluminum
Carrier with a 5-mm gap or
Carrier with a 15-mm gap
Lg. 4,000 Steel
Lg. 4,000 Steel
Type R strip connection splice Dimensions adapted to the strip AluminumCarrier splice - Steel
Option: Gap cover (flush or at the bottom) Lg. 5,000 or 4,000 AluminumOption: Decorative black fleece (to be unrolled) 1x50 m Non-woven
Option: Cover for light fixtures - Aluminum
Perforations Perforations available. Contact us. Caution: perforations are not compatible with industrial atmospheres and coastal locations.
LINEAR PANEL2� LINEAR STRIP
LINEAR STRIP WITH ROUND EDGES ON SEMI-CONCEALED GRID SYSTEM TYPE R
5System brochure
Multi-strip designMulti-strip des gnnig
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: lobbies.
Description
� Linear strips on a semi-concealed grid with notches.
� The strip has straight sides and square edges.
� The open gap between strips can be 5, 15 or 20 mm.
� Inter-strip profiles can be used to create a 15 or 20 mm closed hollow joint.
TYPE ULINEAR STRIP WITH STRAIGHT EDGES ON SEMI-CONCEALED GRID SYSTEM
These visuals are available in greater detail on our web site in the "System visuals" section
LINEAR PANEL2� LINEAR STRIP
Dimensions in mm
80 130
30
180 130 80
30
45 50
70
30U15, 80U20, 130U20, 30U40, 180U20, 30U40, 130U20, 80U20
85 5
13 o
r 20
85U13 or 85U20 strip
43 o
r 50
Module 90
85 135 185 135 8543 50
85U13, 135U20, 185U20, 135U20, 85U13
Carrier with a 20-mm gap Carrier with a 5-mm gap
Carrier with a 15-mm gap
Option: cover for light fixtures
Option: gap cover
30U40 strips
85U13 strips
6System brochure
Light reflection Up to 87%
Opening Unclip each strip by freeing it from the notches on the carrier.
Reaction to fire according to EN 13501-1 Euroclass A1
Cut-outs and integration On-site cut outs. Specific covers for spotlights, sprinklers or other fittings on one or more strip modules are available on request.
Indoor air quality Class A+
ColorsStandard White (RAL 9003) - Prepainted polyester Metallic Gray (RAL 9006) - Prepainted polyester Structured Textured White (RAL 9003)* - Prepainted polyurethane and polyamide Structured Textured Gray (RAL 9006)* - Prepainted polyurethane and polyamide Others colors, brushed, anodized and imitation wood on request Refer to the color chart available on the website*Recommended for type R, U and F strips used outdoors
� Aesthetics: reinforced linear appearance and multi-strip design possibilities (combination of different widths and heights)
� different widths and heights available, and long length possible
� Installation: easy to fit
KEY FEATURES U
Perforations Perforations available. Contact us. Caution: perforations are not compatible with industrial atmospheres and coastal locations.
LINEAR PANEL2� LINEAR STRIP
LINEAR STRIP WITH STRAIGHT EDGES ON SEMI-CONCEALED GRID SYSTEM
Strips in different heights and widths can be combined on the same carrier
* Refer to the product datasheet
SYSTEM INFORMATION
ComponentWidth Height Gap Length
Type U strip*
30U1530
1520
On request.Recom-mended
dimensions between 900 and
6,000 mm*
Aluminumthickness 0.5 or
0.6 mm
30U40 4080U15 80
15 20130U15 130180U15 18085U13
8513 5 or 15
85U2020 15135U20 135
185U20 185
Wall angleor
Channel trim
40x20 Lg. 3,000 Aluminum
16x16x14 Lg. 3,000 Aluminum
Carrier with a 5-mm gapor
Carrier with a 15-mm gapor
Carrier with a 20-mm gap
For 85, 135, 185 strips
For 85, 135, 185 strips
For 30, 80, 130, 180 strips
Lg. 4,000
Lg. 4,000
Lg. 4,000
Steel
Steel
Steel
Type U strip connection splice Dimensions adapted to the strip AluminumCarrier splice - Steel
Option: Gap cover at the bottom Lg. 4,000 AluminumOption: Decorative black fleece (to be unrolled) 1x50 m Non-woven
Option: Cover for light fixtures - Aluminum
TYPE U
7System brochure
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: lobbies and soffits.
Description
� Linear strips on a concealed grid with notches.
� The strip has straight sides and square edges, forming a 15-mm closed hollow joint between the strips.
Dimensions in mm
CLOSED LINEAR STRIP ON CONCEALED GRID SYSTEM
These visuals are available in greater detail on our web site in the "System visuals" section
LINEAR PANEL2� LINEAR STRIP
Option: cover for light fixtures
11 85 15 Module 100
85F11
42
Carrier with a 15-mm gap
TYPE F
8System brochure
Light reflection Up to 87%
Reaction to fire according to EN 13501-1 Euroclass A1
Cut-outs and integration On-site cut outs. Specific covers for spotlights, sprinklers or other fittings on one or more strip modules are available on request.
Indoor air quality Class A+
ColorsStandard White (RAL 9003) - Prepainted polyester Metallic Gray (RAL 9006) - Prepainted polyester Structured Textured White (RAL 9003)* - Prepainted polyurethane and polyamide Structured Textured Gray (RAL 9006)* - Prepainted polyurethane and polyamide Others colors, brushed, anodized and imitation wood on request Refer to the color chart available on the website*Recommended for type R, U and F strips used outdoors
� Aesthetics: reinforced linear appearance and concealed grid
� long length possible � Outdoors: can be installed beneath canopies under certain conditions
KEY FEATURES U
* Refer to the product datasheet
Perforations Perforations available. Contact us. Caution: perforations are not compatible with industrial atmospheres and coastal locations.
LINEAR PANEL2� LINEAR STRIP
TYPE FCLOSED LINEAR STRIP ON CONCEALED GRID SYSTEM
SYSTEM INFORMATION
ComponentWidth Height Gap Length
Type F strip*
85F 85
11 15
On request.Recommended
dimensions between 900
and 6,000 mm*
Aluminumthickness 0.5 or
0.6 mm135F 135
185F 185
Wall angleor
Channel trim
40x20 Lg. 3,000 Aluminum
16x16x14 Lg. 3,000 Aluminum
Carrier with a 15-mm gap Lg. 4,000 SteelType F strip connection splice Dimensions adapted to the strip Aluminum
Carrier splice - SteelOption: Cover for light fixtures - Aluminum
9System brochure
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: shopping malls.
Description
� Linear strips on a semi-concealed grid with notches.
� The strip is suspended vertically with an open gap of 100, 150 or 200 mm.
Dimensions in mm
VERTICAL STRIP ON SEMI-CONCEALED GRID SYSTEM
These visuals are available in greater detail on our web site in the "System visuals" section
LINEAR PANEL2� LINEAR STRIP
123
100
100
Example: V100 stripCarrier with a 100, 150 or 200-mm gap
TYPE V
10System brochure
Light reflectionUp to 87%
Reaction to fire according to EN 13501-1
Euroclass A1
Indoor air quality Class A+
Active fire protection according to EN 12845 If sprinklers are fitted above an open-cell suspended ceiling, the total plan open area of the ceiling, including light fittings, must not be less than 70% of the ceiling plan area.
Open area percentageRecommended maximum gap equal to the height of the strip.Open area percentage greater than 80% of the 100-mm gap.
ColorsStandard White two-sided (RAL 9003) - Prepainted polyester Metallic Gray two-sided (RAL 9006) - Prepainted polyester
� Aesthetics: conceals the plenum when viewed at an angle, while creating an impression of space and light
� high open area percentage for active fire protection systems
� different heights available, and long length possible
KEY FEATURES U
LINEAR PANEL2� LINEAR STRIP
VERTICAL STRIP ON SEMI-CONCEALED GRID SYSTEM
* Refer to the product datasheet
SYSTEM INFORMATION
ComponentHeight Length
Type V strip*V100V150V200
100On request.
Recommended dimensions between 900 and 6,000 mm*
Aluminumthickness 0.5 or
0.6 mm150
200
Carrier for Type V strip Lg. 4,000 Steel
Carrier splice - Steel
Option: Decorative black fleece (to be unrolled) 1x50 m Non-woven
TYPE V
11System brochure
12System brochure
� Ideal for outdoor structures
Long length Easy to install (wide center spacings)
LINEAR PANELN
� High acoustic performance with the ALPHA and ALPHA
CLIPPED LINEAR PANEL ON CONCEALED GRID SYSTEM
INDOOR
PM300-6[ PLAFOMETAL-LC-210 ]
� grades (mechanical strength and corrosion resistance) according to external conditions
CLIPPED LINEAR PANEL ON CONCEALED GRID SYSTEM
OUTDOOR
PM300-6, PM300-6HR, PM300-7HR[ PLAFOMETAL-LC-210E ]
SELECTION GUIDEChoose the system best suited to your needs and the configuration for your linear ceiling.
Check out all the details in each system datasheet.
1 LINEAR STRIP � LINEAR PANEL
Acoustics According to EN ISO 11654
w up to 1 with the ALPHA PLUS offer
Light reflection Up to 87%
Reaction to fire according to EN 13501-1 A1 and A2-s1,d0
EPD verified Available in the INIES database (www.inies.fr)
Perforations Open area percentage, diameter in mm and M or U layout Refer to the technical file to visualize the perforations on a scale of 1:1
ColorsWhite 137 (≈ RAL 9003) - Polyester prepainted steelMetallic Gray (RAL 9006) - Polyester prepainted steel180 RAL colors available on request - Polyester powder postpainted steelOther colors on request subject to quantityPolyester prepainted aluminum
On aluminum, contact us.
NEW NEW
13System brochure
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: lobbies.
Description
� Clipped linear panels on notches-free concealed carriers via a specific stainless steel clip.
� The clip can be used to remove the panels.
Dimensions in mm
CLIPPED LINEAR PANELON CONCEALED GRID SYSTEM INDOOR
These visuals are available in greater detail on our web site in the "System visuals" section
100 54
54
125
PM300-6 NEW
1 LINEAR STRIP � LINEAR PANEL
14System brochure
ColorsWhite 137 (≈ RAL 9003) - Polyester prepainted steel Metallic Gray (RAL 9006) - Polyester prepainted steel 180 RAL colors available on request - Polyester powder postpainted steel
Other colors on request subject to quantity Polyester prepainted aluminum
� Installation: wide center spacings, no need to align the clip notches, and easy to level
� Acoustics: high degree of correction, absorption factor w up to 1
� Opening: panels can be disassembled individually
KEY FEATURES U
* Refer to the datasheet **Contact us
Perforations Open area percentage, diameter in mm and M or U layout
Acoustics According to EN ISO 11654
w up to 0.85 with the ALPHA offer
w up to 1 with the ALPHA PLUS offer Acoustic performance depends on the chosen perforations
Additional acoustic component ALPHA offer: acoustic fleece ALPHA PLUS offer: specific mineral wool pad with a black tissue face or in thin plastic film
Light reflection Up to 87%
EPD verified Available in the INIES database (www.inies.fr)
Reaction to fire according to EN 13501-1 Euroclass A1 for these products:
Euroclass A2 s1,d0 for these products:
Cut-outs and integration On-site cut outs.
Interior corrosion resistance according to EN 13964
Incompatible with chlorine environments
Indoor air quality Class A+ for all these products:
wool pad in thin plastic film Class A for all the products in the ALPHA PLUS offer, with a specific black tissue face.
Opening Panels can be removed by inserting two special tools between panels to release the edges of the H clip. Each panel can be removed individually.
CLIPPED LINEAR PANELON CONCEALED GRID SYSTEM INDOOR
For details about the aluminum perforations available, contact us.*Maximum width 400 mm
the aluminum perforathe aluminum perforations available, contions available, cont
SYSTEM INFORMATION
ComponentWidth Height
center spacings Length
PM300-6 panel* 300 33
Carriers 2100, hangers 1800
orCarriers 1200, hangers 2400
On request.Recommended
dimensions between 2,000 and 4,000 mm
(900 min - 6,000 max)*
Steel thickness 0.6 mm
Additional acoustic component Depending on the panel see ALPHA and ALPHA PLUS offer20-mm hollow joint perimeter profile in 1 or 2 parts** Lg. 3,000 Steel or aluminum
Perimeter wedge or clip - SteelHanger-HR in stainless steel - Stainless steel, thickness 2.5 mm
High-Resistance I-carrier Lg. 4,000 High elastic limit steelI-carrier connector - Steel
H clips - Stainless steel + polypropylene cagePM300 panel length connector - Steel or polypropylene
Option: Disassembly kit - -
PM300-6
1 LINEAR STRIP � LINEAR PANEL
15System brochure
General view - underneath and above
Intended use
Sectional view showing space requirements
Ideal for: lobbies and canopies.
Description
� Clipped linear panels on notches-free concealed carriers via a specific stainless steel clip.
� The clip can be used to remove the panels.
� High-Resistance panels and carriers offer superior mechanical strength, meaning that the center spacings can be increased; refer to our installation advice.
� Excellent corrosion resistance (steel category C5-M).
Dimensions in mm
100 54
54
125
CLIPPED LINEAR PANELON CONCEALED GRID SYSTEM OUTDOOR
These visuals are available in greater detail on our web site in the "System visuals" section
Option: casing (according to wind load)
PM300-6, PM300-6HR, PM300-7HR
NEW
1 LINEAR STRIP � LINEAR PANEL
16System brochure
Colors
� Installation: wide center spacings, no need to align the clip notches, and easy to level
� Exterior: mechanical strength and corrosion resistance for installation beneath canopies
� Opening: panels can be disassembled individually
KEY FEATURES U
* Refer to the datasheet **Depending on the project's installation specifications and degree of wind exposure ***Contact us
Perforations Open area percentage, diameter in mm and M or U layout
Acoustics According to EN ISO 11654
w up to 1 with the ALPHA PLUS offer Acoustic performance depends on the chosen perforations
Additional acoustic component ALPHA PLUS offer: specific sound-absorbing material in thin plastic film
Light reflection Up to 87%
EPD verified Available in the INIES database (www.inies.fr)
Cut-outs and integration On-site cut outs.
Reaction to fire according to EN 13501-1 Euroclass A1 for non-perforated prepainted products. Euroclass A2 s1,d0 for these products:
Exterior corrosion resistance Steel according to EN 12944
Category C2 for perforated steel PM300-6
PM300-6 and perforated steel PM300-6HR
perforated steel PM300-6HR Aluminum according to EN 1396
aluminum In all cases, the ceiling must be protected from rain and runoff water.
Indoor air quality Class A+ for all these products:
wool pad in thin plastic film
Wind resistance according Eurocodes 0, 1, 3 and 9
Opening Panels can be removed by inserting two special tools between panels to release the edges of the H clip. Each panel can be removed individually.
For details about the aluminum perforations available, contact us.
Caution: in industrial atmospheres or coastal locations, contact us for a specific analysis of the perforations available.*Maximum width 400 mm
SYSTEM INFORMATION
ComponentWidth Height Length
PM300-6 panel*
300 33
Carriers 1200, hangers 1800
On request. Recommended
dimensions between 2,000 and 4,000 mm (900 min - 6,000 max)*
Steel thickness 0.6 mm
PM300-6HR panel* or PM300-7HR panel* Carriers 2100, hangers 1800
High-Resistance high elastic limit steel, thickness 0.6 mm High-Resistance high elastic limit aluminum, thickness 0.7 mm
Additional acoustic component Depending on the panel ALPHA PLUS: specific mineral wool pad in thin plastic film only20-mm hollow joint perimeter profile in 1 or 2 parts*** Lg. 3,000 Steel or aluminum
Perimeter wedge or clip - SteelU-profile for anti-lifting Lg. 3,000 Steel
Hanger-HR in stainless steel - Stainless steel, thickness 2.5 or 4 mmHigh-Resistance I-carrier Lg. 4,000 High-Resistance high elastic limit steel
I-carrier connector - SteelH clips - Stainless steel + polypropylene cage
PM300 panel length connector - Steel or polypropyleneOption: Disassembly kit - -
CLIPPED LINEAR PANELON CONCEALED GRID SYSTEM OUTDOOR
PM300-6, PM300-6HR, PM300-7HR
White 137 (≈ RAL 9003) - Polyester prepainted steel Metallic Gray (RAL 9006) - Polyester prepainted steel Structured Textured White 137 (≈ RAL 9003)* - Prepainted High-Resistance steel Ultra Matt White (RAL 9010)* - Prepainted High-Resistance aluminum
180 RAL colors available on request - Polyester powder postpainted steel Other colors on request subject to quantity - Polyester prepainted aluminum*Recommended for urban atmospheres (perforated or non-perforated), as well industrial atmospheres and coastal locations (non-perforated)
1 LINEAR STRIP � LINEAR PANEL
material grade) can be used for High-Resistance I-carrier center spacings up to 2,100 mm depending on the project's installation specifications and degree of wind exposure.
spacings according to the mechanicalstrength of the selected material grade and specify the degree of wind andcorrosion exposure depending on the project's installation specifications.
17System brochure
A Saint-Gobain brand
WWW.PLAFOMETAL.COM
Plaf
omet
al -
Sim
plifi
ed jo
int-
stoc
k co
mpa
ny w
ith a
cap
ital o
f €20
0,96
0 - L
iste
d in
the
Seda
n Tr
ade
and
Com
pani
es R
egis
ter u
nder
no.
423
933
779
- Ro
ute
de P
hade
s, 08
800
Mon
ther
mé,
Fra
nce.
Phot
o cr
edits
: Pla
fom
etal
, Pas
cal A
rtur
, Fra
nck
Del
etan
g, F
otol
ia. J
une
2020
. Do
not l
itter
.