broadsoft partner configuration guide - ascom-ws.com partner configuration guide – ascom ip dect...
TRANSCRIPT
BroadSoft Partner Configuration Guide Ascom IP DECT Series
December 2013 Document Version 1.2
Grimbodalen 2 417 49 Göteborg, Sweden Phone: +46 31 55 93 00
WWW.ASCOM.COM
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 2 OF 26
BroadWorks® Guide
Copyright Notice Ascom© 2013. All rights reserved.
The entire content of this Ascom document is copyright protected with all rights reserved.
All property rights shall remain with Ascom. The terms and conditions for the use of the Ascom document shall be deemed to be accepted, if a user downloads or otherwise copies any content from the Ascom document.
Trademarks BroadWorks® and BroadWorks Assistant–Enterprise™, BroadWorks Call Center™, BroadWorks Communicator™, BroadWorks Receptionist™, and BroadWorks Deployment Studio™ are trademarks of BroadSoft, Inc.
Microsoft, MSN, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. Other product names mentioned in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
This document is printed in the United States of America.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 3 OF 26
Document Revision History
Version Reason for Change
1.1 Introduced document for Ascom IP DECT Series version 6.1.2 validation with BroadWorks Release 19.sp1.
1.2 Edited and published document.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 4 OF 26
Table of Contents
1 Overview .............................................................................................................................................5
2 Interoperability Status ......................................................................................................................6
2.1 Verified Versions ........................................................................................................................... 6 2.2 Interface Capabilities Supported .................................................................................................. 6
2.2.1 Interface Capabilities Supported ......................................................................................... 7 2.3 Known Issues ............................................................................................................................ 11
3 BroadWorks Configuration .......................................................................................................... 12
3.1 BroadWorks Device Profile Type Configuration ...................................................................... 12 3.2 BroadWorks Configuration Steps ............................................................................................. 13
4 IP DECT Series Configuration...................................................................................................... 14
4.1 Subscriber Level Configuration Parameters ............................................................................ 14 4.2 Advanced SIP Features Configuration ..................................................................................... 16 4.3 Xtended Services Interface Feature Configuration .................................................................. 16 4.4 Instant Message and Presence Configuration ......................................................................... 16
5 Device Management ...................................................................................................................... 17
Appendix A: Sample IP DECT Configuration Files .......................................................................... 18
References ............................................................................................................................................... 26
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 5 OF 26
1 Overview
This guide describes the configuration procedures required for the Ascom IP DECT Series for interoperability with BroadWorks. This includes the following models:
Ascom IP-DECT Base Station, IPBS2, v. 6.1.2
Ascom IP-DECT Base Station, IPBS1, v. 6.1.2
Ascom IP-DECT Gateway, IPBL, v. 6.1.2
The IP DECT is a series of cordless IP DECT base stations that use the Session Initiation Protocol (SIP) to communicate with BroadWorks for call control.
This guide describes the specific configuration items that are important for use with BroadWorks. It does not describe the purpose and use of all configuration items on the IP DECT series. For those details, see the Installation and Operation Manual, IP-DECT Base Station and IP-DECT Gateway, TD 92579EN [1] supplied by Ascom.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 6 OF 26
2 Interoperability Status
This section provides the known interoperability status of the Ascom IP DECT Series with BroadWorks. This includes the version(s) tested, capabilities supported, and known issues.
Interoperability testing validates that the device interfaces properly with BroadWorks via the SIP interface. Qualitative aspects of the device or device capabilities not affecting the SIP interface such as display features, performance, and audio qualities are not covered by interoperability testing. Requests for information and/or issues regarding these aspects should be directed to Ascom.
2.1 Verified Versions The following table identifies the verified Ascom IP DECT Series and BroadWorks versions and the month/year the testing occurred. If the device has undergone more than one test cycle, versions for each test cycle are listed, with the most recent listed first.
Compatible Versions in the following table identify specific IP DECT versions, which the partner has identified as compatible and should interface properly with BroadWorks. Generally, maintenance releases of the validated version are considered compatible and are not specifically listed here. For any questions concerning maintenance and compatible releases, contact Ascom.
NOTE: Interoperability testing is usually performed with the latest generally available (GA) device firmware/software and the latest GA BroadWorks release and service pack at the time the testing occurs. If there is a need to use a non-verified mix of BroadWorks and device software versions, customers can mitigate their risk by self-testing the combination using the BroadWorks SIP Access Device Interoperability Test Plan [4].
Verified Versions
Date (mm/yyyy) BroadWorks Release IP DECT Verified Version
IP DECT Compatible Versions
11/2013 Release 19.sp1 6.1.2 List any specific compatible versions.
2.2 Interface Capabilities Supported This section identifies interface capabilities that have been verified through testing as supported by Ascom IP DECT Series.
The Supported column in the tables in this section identifies the Ascom IP DECT Series’ support for each of the items covered in the test plan, with the following designations:
Yes Test item is supported.
No Test item is not supported.
NA Test item is not applicable to the device type.
NT Test item was not tested.
Caveats and clarifications are identified in the Comments column.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 7 OF 26
2.2.1 Interface Capabilities Supported The Ascom IP DECT Series has completed interoperability testing with BroadWorks using the BroadWorks SIP Access Device Interoperability Test Plan [4]. The results are summarized in the following table.
The BroadWorks test plan is composed of packages, each covering distinct interoperability areas, such as “Basic” call scenarios and “Redundancy” scenarios. Each package is composed of one or more test items, which in turn, are composed of one or more test cases. The test plan exercises the SIP interface between the device and BroadWorks with the intent to ensure interoperability sufficient to support the BroadWorks feature set.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the Ascom IP DECT Series.
BroadWorks SIP Access Device Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
Basic Call Origination Yes
Call Termination Yes
Session Audit Yes
Session Timer Yes
Ringback Yes
Forked Dialog Yes
Early UPDATE No
Early-Session No
181 Call Being Forwarded Yes
Dial Plan Yes
Dual-Tone Multi-Frequency (DTMF) – Inband
Yes
DTMF – RFC 2833 Yes
DTMF – DTMF Relay Yes
Codec Negotiation Yes
Codec Renegotiation Yes
BroadWorks Services Third-Party Call Control – Basic No There is partial implementation of advanced call control.
Third-Party Call Control – Advanced No
Voice Message Deposit or Retrieval Yes
Message Waiting Indicator Yes No message count support
Voice Portal Outcall Yes
Advanced Alerting No
Calling Line ID Yes
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 8 OF 26
BroadWorks SIP Access Device Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
Calling Line ID with Unicode Characters
Yes
Connected Line ID No
Connected Line ID with Unicode Characters
No
Connected Line ID on UPDATE No
Connected Line ID on Re-INVITE No
Diversion Header Yes
History-Info Header Yes
Advice of Charge No
Meet-Me Conferencing Yes
DUT Services – Call Control Services
Call Waiting Yes
Call Hold Yes
Call Transfer Yes
Three-Way Calling No
Network-Based Conference No
DUT Services – Registration and Authentication
Register Authentication Yes
Maximum Registration Yes
Minimum Registration Yes
Invite Authentication Yes
Re-Invite or Update Authentication Yes
Refer Authentication Yes
Device Authenticating BroadWorks No
DUT Services – Fax G711 Fax Passthrough NA
G711 Fax Fallback NA
T38 Fax Messaging NA
DUT Services – Emergency Call
Emergency Call No
Emergency Call with Ringback No
DUT Services – Miscellaneous
Do Not Disturb Yes
Call Forwarding Always Yes
Call Forwarding Always Diversion Inhibitor
Yes
Anonymous Call No
Anonymous Call Block No
Remote Restart Via Notify No
Advanced Phone Busy Lamp Field No
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 9 OF 26
BroadWorks SIP Access Device Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
Services – Busy Lamp Field
Call Park Notification No
Advanced Phone Services – Feature Key Synchronization, Private Line
Do Not Disturb No
Do Not Disturb Ring Splash No
Call Forwarding No
Call Forwarding Always Ring Splash No
Call Forwarding Always Diversion Inhibitor
No
Call Center Agent Logon or Logoff No
Call Center Agent Unavailable Code No
Advanced Phone Services – Feature Key Synchronization, Shared Line
Do Not Disturb No
Do Not Disturb Ring Splash No
Call Forwarding No
Call Forwarding Always Ring Splash No
Call Forwarding Always Diversion Inhibitor
No
Advanced Phone Services – Missed Calls Display Synchronization
Missed Calls Display Sync No
Advanced Phone Services – Shared Call Appearance using Call Info
Line-Seize No
Call-Info or Lamp Management No
Public Hold No
Private Hold No
Hybrid Key System No
Multiple Call Arrangement No
Bridging No
Call Park Notification No
Advanced Phone Services – Call Center
Hold Reminder No
Call Information No
Hoteling Event No
Status Event No
Disposition Code No
Emergency Escalation No
Customer Originated Trace No
Advanced Phone Services – Call Park Notification
Call Park Notification No
Redundancy Domain Name System (DNS) Yes
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 10 OF 26
BroadWorks SIP Access Device Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
SRV Lookup
Register Failover or Failback Yes
Invite Failover or Failback No
Bye Failover No
Session Border Controller (SBC)/Application Layer Gateway (ALG)
Register Yes
Outgoing Invite Yes
Incoming Invite Yes
Video – Basic Video Calls
Call Origination NA
Call Termination NA
Call Hold NA
Call Waiting NA
Call Transfer NA
Video – BroadWorks Video Services
Auto Attendant NA
Auto Attendant – HD NA
Voice Messaging NA
Voice Messaging – HD NA
Custom Ringback NA
TCP Register Yes
Outgoing Invite Yes
Incoming Invite Yes
IPV6 Call Origination No
Call Termination No
Session Audit No
Ringback No
Codec Negotiation or Renegotiation No
Voice Message Deposit or Retrieval No
Call Control No
Registration with Authentication No
T38 Fax Messaging No
Busy Lamp Field No
Redundancy No
SBC No
Video No
Dual Stack with Alternate Connectivity
No
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 11 OF 26
2.2.2 Other Interface Capabilities The Ascom IP DECT Series does not offer BroadWorks Xtended Services Interface or BroadCloud IM&P support.
2.3 Known Issues This section lists the known interoperability issues between BroadWorks and specific partner release(s). Issues identified during interoperability testing and known issues identified in the field are listed.
The following table provides a description of each issue and, where possible, identifies a workaround. The verified partner device versions are listed with an “X” indicating that the issue occurs in the specific release. The issues identified are device deficiencies or bugs, and are typically not BroadWorks release dependent.
If the testing was performed by BroadSoft, then the Issue Number is a BroadSoft ExtraView partner issue number. If the testing was performed by the partner or a third party, then the partner may or may not supply a tracking number.
For more information on any issues related to the particular partner device release, see the partner release notes.
Issue Number Issue Description Partner Version
6.1.2
EV 208952 Ascom IP DECT does not support Allow-Events Hold
There is a partial implementation of advanced call control where the Hold event is un-available. This causes the 3rd party advanced call control functionalities to be broken. Further, the call hold scenario can only be invoked at the end point.
Workaround: Call hold needs to be invoked on the device and cannot be perform through 3rd party call control.
X
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 12 OF 26
3 BroadWorks Configuration
This section identifies the required BroadWorks device profile type for the Ascom IP DECT Series as well as any other unique BroadWorks configuration required for interoperability with the IP DECT.
3.1 BroadWorks Device Profile Type Configuration This section identifies the device profile type to use when deploying the Ascom IP DECT Series with BroadWorks.
The following table identifies the required BroadWorks device identity/profile type settings for interoperability between the IP DECT and BroadWorks. For an explanation of the profile parameters, see the BroadWorks Device Management Configuration Guide [2].
For most of the following parameters, an “X” indicates that the parameter function is supported and/or required. If the item is blank, it is not supported. For items where text is supplied, the text content maps directly to the web page to add or to modify a device profile type.
Ascom IP DECT Series Identity/Device Profile Type
Signaling Address Type Intelligent Proxy Addressing
Standard Options
Number of Ports 1
Ringback Tone or Early Media Support
Local Ringback – No Early Media
Authentication Enabled
Hold Normalization RFC 3264
Registration Capable X
Static Registration Capable
E.164 Capable
Trusted
Authenticate REFER X
Video Capable
Use History-Info Header
Advanced Options
Route Advance
Wireless Integration
PBX Integration
Add P-Called-Party-ID
Auto Configuration Soft Client
Requires BroadWorks Call Waiting Tone
Advice of Charge Capable
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 13 OF 26
Ascom IP DECT Series Identity/Device Profile Type
Support Emergency Disconnect Control
Enable Monitoring
Static Line/Port Ordering
Forwarding Override
Conference Device
Music On Hold Device
Requires BroadWorks Digit Collection
Requires MWI Subscription
Support Call Center MIME Type
Support Identity in UPDATE and Re-INVITE
Support RFC 3398
Reset Event Not Supported
Trunk Mode User
Hold Announcement Method Inactive
Unscreened Presentation Identity Policy
Profile
Web Based Configuration URL Extension
Device Configuration Options
Device Configuration Options Not Supported
3.2 BroadWorks Configuration Steps There are no additional BroadWorks configurations necessary.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 14 OF 26
4 IP DECT Series Configuration
The Ascom IP-DECT can be configured through its embedded web server. The following examples describe how to set the parameters using a configuration file. This configuration description assumes the Ascom IP-DECT uses the Dynamic Host Configuration Protocol (DHCP) to obtain an IP address, and other network settings. The Ascom IP-DECT should be configured to load the configuration file each time it resets or re-synchronizes. For detailed information on automated provisioning, see the Installation and Operation Manual, IP-DECT Base Station and IP-DECT Gateway, TD 92579EN [1].
The capabilities of the Ascom IP-DECT have been verified for use with BroadWorks based on the settings described in the following table. For more information on the meaning, purposes, and applicability of the individual configuration Items, see the Installation and Operation Manual, IP-DECT Base Station and IP-DECT Gateway TD, 92579EN [1].
Configuration Files Files Provided by Partner Level Description
IPBS2_firm_v6p1p2.bin Static Contains the device firmware load.
intop_bs_complete-IPBS2-13-67-94 Subscriber Contains configurable parameters that apply to an individual device in a deployment.
4.1 Subscriber Level Configuration Parameters This section identifies the device-specific parameters, including registration and authentication. These settings must be unique across devices to be matched with the settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the subscriber’s line. Registration requires that a unique address of record (AoR) is provisioned on BroadWorks and the phone. Provisioning an AoR on BroadWorks consists of setting the line/port parameter to a unique value within the Application Server cluster.
Step Command Purpose
System Configuration File: intop_bs_complete-IPBS2-13-67-94
Step 1 Set the SIP Proxy/Domain.
sipProxy = as.broadworks.net
Set the IP-DECT SIP server to the Fully Qualified Domain Name (FQDN) for the BroadWorks Application Server cluster.
The domain must match the domain configured for the BroadWorks subscriber’s line/port domain.
Step 2 Set the Outbound Proxy.
outBoundProxy = sbc.broadworks.net
Set the outbound proxy to the SBC if one is deployed between the IP-DECT and BroadWorks.
If there are redundant SBCs, set it to the FQDN for the SBC cluster.
Step 3 Enable DNS SRV lookup.
Use_DNS_SRV = “Yes” ;
Enable DNS SRV lookups.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 15 OF 26
Step Command Purpose
System Configuration File: intop_bs_complete-IPBS2-13-67-94
Step 4 Set register mode.
RegistMode = 1
Enable SIP register.
Step 5 Set SIP Timers.
SIP_T1 ".5" ;
SIP_T2 "4" ;
SIP_T4 "4" ;
INVITE_Expires "240" ;
ReINVITE_Expires "30" ;
Reg_Min_Expires "1" ;
Reg_Max_Expires "86400" ;
Reg_Retry_Intvl "30" ;
Reg_Retry_Long_Intvl "600" ;
Set the SIP timers to levels short enough to support a timely failover when there is no server response.
The suggested registration period (Reg Max Expires) is one day or 86400 seconds.
Set the Reg Retry Long Intvl timer to 600 (10 minutes) to limit the frequency of REGISTER retries after a 403 Forbidden response.
Step 6 Enable reliable response.
SIP_100REL_Enable "Yes" ;
Reliable provisional response (PRACK) should be enabled.
Step 7 Enable audio message waiting indicator (MWI).
MwiNotifyTone = 1
Optional: Enable the phone to play an audio alert for an incoming voice message.
Step 8 Enable negotiated DTMF type.
Auto_DTMF_Mode = 1
Set the IP-DECT to enable inband or RFC 2833 negotiated DTMF.
Step 9 Set hold implementation type.
HoldType = 3264
Recommended: Set the hold implementation to RFC 3264.
Step 10 Set ring types.
DttvRingInt1 = dr2
DttvRingInt2 = dr3
DttvRingInt3 = dr4
DttvRingExt2 = dr5
Identify distinctive ring types for BroadWorks priority alerting (dr2), alternate numbers (dr3 and dr4), and ring splash (dr5) features.
This enables the phone to play a distinctive ring when these features are invoked.
Step 11 Set call waiting tone types.
DttvCallWaitRing1 = CallWaitingTone1
DttvCallWaitRing2 = CallWaitingTone
Configure the phone to enable distinctive call waiting tones.
Step 12 Configure the dial plan.
Example:
Dial_Plan " ( [2346789]11S0 | [0-1][2-9]11S0 | 0 | 00S0 | 01[2-9]xx. | *xx | 011x. | [0-1]xxxxxxx | [0-1][2-9]xxxxxxxxxS0 | [2-9]xxxxxxxxxS0 | [2-9]xxxxxx | 101xxxx. | 11S0 | [2-9]x. ) " ;
Configure the IP-DECT dial plan according to the locale.
The dial plan shown is an example of a typical North American dial plan.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 16 OF 26
Step Command Purpose
System Configuration File: intop_bs_complete-IPBS2-13-67-94
Step 13 Enable supplementary services.
Conference "Yes" ;
Attn_Transfer "Yes" ;
Blind_Transfer "Yes" ;
Enable Conference, Attended Transfer, and Blind Transfer services controlled from the phone.
Step 14 Enable each line to be used.
Line_Enable[1] "Yes" ; Line_Enable[2] "Yes" ;
Enable each IP-DECT in use.
Step 15 Set Register User ID for each line.
Example:
User_ID[1] "2405551111" ; User_ID[2] "2405552222" ;
The register user ID must correspond with the line/port setting on BroadWorks.
Step 16 Enable SIP Authentication for each line.
Example:
Auth_ID[1] "[email protected]" ;
Password[1] "welcome" ;
Auth_ID[2] "[email protected]" ;
Password[2] "welcome" ;
If the Authentication service is configured on BroadWorks, these parameters must be configured to match the BroadWorks settings.
Step 17 Configure display name for each line.
Example:
Display_Name[1] “Claire Smith” ;
Display_Name[2] “Julie Wenkel” ;
For each line, configure the name to be displayed on the device.
4.2 Advanced SIP Features Configuration The Ascom IP-DECT does not support advanced SIP features.
4.3 Xtended Services Interface Feature Configuration The Ascom IP-DECT does not support Xtended Services Interface features.
4.4 Instant Message and Presence Configuration The Ascom IP-DECT does not support IM&P features.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 17 OF 26
5 Device Management
The Ascom IP DECT Series does not currently support the BroadWorks Device Management feature.
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 18 OF 26
Appendix A: Sample IP DECT Configuration Files
NOTE: The following samples are examples and should be used as a reference only. DO NOT CUT AND PASTE THESE EXAMPLES TO GENERATE YOUR CONFIGURATION FILES. Use the configuration files obtained from Ascom with the specific release to generate your configuration files.
Phone-Specific File: intop_bs_complete-IPBS2-13-67-94.txt
NOTE: This is an example file and should be used for reference only.
vars check 40c7f6a5417cf827ae80d311e004 # IPBS2[6.1.2], Bootcode[6.1.2], Hardware[IPBS2-A3/1B1] # IPBS2-13-67-94 # config change FLASHMAN0 config change VARS config change SNMP0 config change ASC_SUBAGNT0 config change LOG0 config change LOG0 FAULT config change LOG0 CNT config change CDR0 config change CDR1 config change CPU config change ASC_LOGGING0 config change SER0 config change SPI0 config change SER1 config change MSP0 config change ETH0 config change PPPOE0 config change PPTP config change IP0 config change IP0 ETH0 /addr 195.81.148.125 /mask 255.255.255.192 /dns 8.8.8.8 config change IP0 PPP0 config change IP0 PPP1 config change IP0 PPP2 config change IP0 PPP3 config change IP0 RT0 /gateway 195.81.148.67 config change IP0 RT1 config change IP0 RT2 config change IP0 RT3 config change IP6 config change IP6 ETH0 config change IP6 6TO4-00 config change IP6 6TO4-01 config change IP6 6TO4-02 config change IP6 6TO4-03 config change IP6 6TO4-04 config change IP6 6TO4-05 config change IP6 6TO4-06 config change IP6 6TO4-07 config change ENET1X0
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 19 OF 26
config change NAT0 config change NAT0 H323NAT0 config change DNS0 config change KEYGEN config change X509 config change TLS_CIPHER0 config change TLS0 config change CMD0 /name DECT2 config change PCAP config change HTTPCLIENT0 config change WEBDAV0 config change HTTP0 /force-https config change TELNET0 config change PING0 config change WEBMEDIA config change MEDIA-FWD config change MEDIA config change NTP0 /addr 62.119.40.98 /alt-addr 62.119.40.98 /interval 60 /offset CET-1CEST-2,M3.5.0/2,M10.5.0/3 config change SYNC config change DHCP0 /mode off config change FLASHDIR0 config change LDAPSRV0 config change LDAPDIR0 config change LDAPREP0 /server 10.11.24.244 /user ipdect /repl-type FULL-REPL /dn cn%3DPBX0 /filter-gui DECT config change KERBEROS config change KDB0 config change TESTIF0 config change RFP0 /module-trace config change RFP0 RFPDWL config change RFPSTAT0 config change RFPINIT0 /mode master /sync-region 0 /resync 0 /hour1 0 /day 0 /hour2 0 /module-trace config change RFPINIT0 PRODPARAM /module-trace config change DECT /cipher /dbgmask 0x0 /module-trace config change DECT /cipher /dbgmask 0x0 /module-trace config change H323 config change SIP /log on /msg-trace on config change TSIP config change SIPS config change TEST config change TONE config change HTTP config change ECHO config change SIG0 config change SIG1 config change SMTP0 config change UP0 config change UP1 config change ASDP config change UNITED config change CUNITE /module-trace config change CUNITE FILEGET /module-trace config change CUNITE CALLINFO config change CUNITE KEYVALUE config change DEVICELIC config change UNITE /module-trace config change UNITE UTP /module-trace config change UNITE GROUPHANDLER config change UNITE FAULTHANDLER config change UNITE DEVMANHANDLER /module-trace config change MATP /module-trace
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 20 OF 26
config change CUTP /port 12346 /module-trace config change SMSRL /encryption config change SMSC config change AIRSYNCCTRL /module-trace config change PHONEBOOK config change PHONEBOOK PHBFLASH0 config change ICP /module-trace config change GW-DECT /kp /disc-no-ct /coder G711A,20, /name DECT config change GW-DECT LOCALUSERS /kp config change GW-DECT CRYPTOMASTER config change GW-DECT MOBMASTER config change GW-DECT MASTER /users-per-sec 500 /mode ACTIVE /id 0 /prot SIP /proxy 199.19.193.10 /gk 10.11.24.244 /gk-id as.iop1.broadworks.net /int-num-len 4 /sip-hold inactive /status-inq-period 90 /supervision 600 /enbloc /pari-active /allow-rtp-dtmf /auth-name /trace-mask config change GW-DECT DYNCFG /cmd form /xsl dyncfg.xsl /save OK /userid admin config change GW-DECT DISPLAY config change GW-DECT RADIO /master-name DECT /master 195.81.148.124 /alt-master 195.81.148.124 /trace-mask config change GW-DECT SMSCLGA config change GW-DECT MIHOTDESK /module-trace config change GW-DECT DATAFWD /module-trace config change GW-DECT DECTPARI /sarilistlen 10 /sysid 120 config change GW-DECT FTY /pick . /pin . /lock . /lock0 . /dnd-int . /dnd-int0 . /dnd-ext . /dnd-ext0 . /park . /park0 . /pick-grp . /pick-dir . /park-to . /park-to0 . /mwi-mode USER-INTERROGATE-USER-NOTIFY /mwi0 1000 /grp . /grp0 . /nclir . /nclir0 . /clir . /clir0 . config change RELAY0 config change RELAY0 FTY config change RELAY0 RELAY-SIP config change RELAY0 RELAY-TSIP config change RELAY0 RELAY-SIPS config change RELAY0 TEST config change RELAY0 TONE config change RELAY0 HTTP config change RELAY0 ECHO config change RELAY0 SIG0 config change RELAY0 SIG1 config change RELAY0 SIP1 config change RELAY0 SIP2 config change RELAY0 SIP3 config change RELAY0 SIP4 config change RELAY0 GW1 config change RELAY0 GW2 config change RELAY0 GW3 config change RELAY0 GW4 config change RELAY0 GW5 config change RELAY0 GW6 config change RELAY0 GW7 config change RELAY0 GW8 config change RELAY0 GW9 config change RELAY0 GW10 config change RELAY0 GW11 config change RELAY0 GW12 config change RELAY0 RT1 config change RELAY0 RT2 config change RELAY0 RT3 config change RELAY0 RT4 config change RELAY0 RT5 config change RELAY0 RT6 config change RELAY0 RT7 config change RELAY0 RT8
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 21 OF 26
config change RELAY0 RT9 config change RELAY0 RT10 config change RELAY0 RT11 config change RELAY0 RT12 config change RELAY0 RT13 config change RELAY0 RT14 config change RELAY0 RT15 config change RELAY0 RT16 config change RELAY0 RT17 config change RELAY0 RT18 config change RELAY0 RT19 config change RELAY0 RT20 config change RELAY0 RT21 config change RELAY0 RT22 config change RELAY0 RT23 config change RELAY0 RT24 config change RELAY0 RT25 config change RELAY0 RT26 config change RELAY0 RT27 config change RELAY0 RT28 config change RELAY0 RT29 config change RELAY0 RT30 config change RELAY0 RT31 config change RELAY0 RT32 config change RELAY0 REG config change-flags vars del vars create AIRSYNC/REGION/000 p vars create CMD0/AUTH pc 40c7f6a5417cf827ae80d311e004 vars create CPU/BOX-INIT p vars create DECT/SYSID pb 18000000 vars create DHCP0/LAST-LEASE p 10.11.24.163,255.255.255.0,10.11.24.1,8.8.4.4,8.8.8.8,,10.11.24.243 vars create GW-DECT/RADIOS/IPBS2-13-15-c8 p 901EB51008,Ascom+IP-DECT+Base+Station:DECT2 vars create GW-DECT/RADIOS/IPBS2-13-67-94 p 901EB52009,Ascom+IP-DECT+Base+Station:DECT2 vars create LDAPREP0/AUTH pc 48d3ffa94c24 vars create LDAPSRV0/AUTH pc 4dc7fabc0237ee2abc9a8e1dfd196e0d459d vars create PBX0/KEY pbc 219400b82f6a4b7ccfd0b0868d202fc4 vars create PBX0/PWD pc 42cbfaa24835f62acfeeb4748d611675 vars create PPP0/LOCAL-AUTH pc vars create PPP0/REMOTE-AUTH pc vars create PPP1/LOCAL-AUTH pc vars create PPP1/REMOTE-AUTH pc vars create PPP2/LOCAL-AUTH pc vars create PPP2/REMOTE-AUTH pc vars create PPP3/LOCAL-AUTH pc vars create PPP3/REMOTE-AUTH pc vars create RADIO/MASTERPWD pc 42cbfaa24835f62acfa2f035dd416410 vars create UPDATE/VIRGIN p 1 vars create X509/DEVICE_CERTIFICATE/00000 pb 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
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 22 OF 26
92a864886f70d010105050003818100a66fb2c1de03ea4bf151fcad9997d7ba3544f78b93c89a1497a649a368e275db9be5fc94906301a33bb5f6ec7eb9d1ab5113959404452f315689332c60f4652c35791e83af68f23961a587b710c7669a74eb66cd783030a93456db89391d875dfea8008500e1ec4c0b4ddcab1719c8b3d4a69038f0fad8e0f5a72f603f18c7f2 vars create X509/DEVICE_KEY pbc 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 vars create X509/INIT p 1 mod cmd FLASHDIR0 erase-all mod cmd FLASHDIR0 add-view 101 cn=KDB0 mod cmd FLASHDIR0 add-view 102 cn=PBX0 mod cmd FLASHDIR0 add-item 102 (cn=Test 00)(h323=2000)(e164=2000)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=0C385B30E909D31197B10090330800AD)(usn=46) mod cmd FLASHDIR0 add-item 102 (cn=Test 03)(h323=2003)(e164=2003)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=018A5373E909D311A1750090330800AD)(usn=47) mod cmd FLASHDIR0 add-item 102 (cn=Test 04)(h323=2004)(e164=2004)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=018E1AC9E909D311A1750090330800AD)(usn=48) mod cmd FLASHDIR0 add-item 102 (cn=Test 05)(h323=2005)(e164=2005)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=02FDB4EBE909D311B1460090330800AD)(usn=49) mod cmd FLASHDIR0 add-item 102 (cn=Test 06)(h323=2006)(e164=2006)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=05847081E909D311B1460090330800AD)(usn=50) mod cmd FLASHDIR0 add-item 102 (cn=Test 07)(h323=2007)(e164=2007)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-in="65535" busy-out="2"/>)(guid;bin=05A2E2CEE909D311B1460090330800AD)(usn=51) mod cmd FLASHDIR0 add-item 102 (cn=Test 08)(dn=i75 08 2008)(h323=2008)(e164=2008)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-out="2"/>)(pbx=<device hw="2008"/>)(pbx=<presence/>)(guid;bin=05ACC0DFE909D311B1460090330800AD)(usn=52) mod cmd FLASHDIR0 add-item 102 (cn=EXTERN)(h323=EXTERN)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal"/>)(pbx=<pseudo type="gw"/>)(pbx=<device hw="EXTERN"/>)(pbx=<presence/>)(guid;bin=013001AFE909D311BD2F0090330800AD)(usn=53) mod cmd FLASHDIR0 add-item 102 (cn=Test 09)(dn=Test 09)(h323=2009)(e164=2009)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-out="2"
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 23 OF 26
pwd="722c0478409d0c5138632ab6b0f52cef"/>)(pbx=<device hw="2009"/>)(pbx=<presence c="tel:"/>)(guid;bin=0588B5FBE909D311B1460090330800AD)(usn=54) mod cmd FLASHDIR0 add-item 102 (cn=Test 01)(dn=Test 01)(h323=2001)(e164=2001)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-out="2" pwd="722c0470409d0c5138632ab6b0f52cef"/>)(pbx=<device hw="2001"/>)(guid;bin=003470B7E909D311B1460090330800AD)(usn=55) mod cmd FLASHDIR0 add-item 102 (cn=Test 11)(dn=Test 11)(h323=9911)(e164=9911)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="79250570409d0c5138632ab6b0f52cef"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9911"/>)(guid;bin=137606C6E909D311929A0090331E02FD)(usn=57) mod cmd FLASHDIR0 add-item 102 (cn=Test 25)(dn=Test 9925)(h323=9925)(e164=9925)(loc=.)(node=root)(pbx=<user/>)(pbx=<device hw="9925"/>)(guid;bin=A30D01ABE909D3119A5E0090331E02FD)(usn=58) mod cmd FLASHDIR0 add-item 102 (cn=Test 29)(dn=Test 29)(h323=9929)(e164=9929)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2"/>)(pbx=<device hw="9929"/>)(guid;bin=EC01B608E909D31182ED0090331E02FD)(usn=59) mod cmd FLASHDIR0 add-item 102 (cn=Test 12)(dn=i75 12 9912)(h323=9912)(e164=9912)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-out="2" pwd="79250573409d0c5138632ab6b0f52cef"/>)(pbx=<device hw="9912"/>)(pbx=<presence c="tel:"/>)(guid;bin=05B47759E909D311B1460090330800AD)(usn=60) mod cmd FLASHDIR0 add-item 102 (cn=Test 10)(dn=Test 10)(h323=9910)(e164=9910)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="79250571409d0c5138632ab6b0f52cef"/>)(pbx=<device hw="9910"/>)(guid;bin=A67D7518E909D311929A0090331E02FD)(usn=64) mod cmd FLASHDIR0 add-item 102 (cn=Test 24)(dn=Test 9924)(h323=9924)(e164=9924)(loc=.)(node=root)(pbx=<user/>)(pbx=<device hw="9924"/>)(pbx=<presence c="sip:[email protected]" s="open"/>)(guid;bin=98302851E909D311B3300090331E02FD)(usn=65) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6202)(dn=Miratel 6202)(h323=6202)(e164=6202)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="762e0473409d0c5138632ab6b0f52cef"/>)(pbx=<device hw="6202"/>)(guid;bin=A4DE81BBE909D311AB6D0090331E02FD)(usn=68) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6222)(dn=6222)(h323=6222)(e164=6222)(loc=.)(node=root)(pbx=<user/>)(guid;bin=2A7E47B2E909D311AB6D0090331E02FD)(usn=69) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6221)(dn=6221)(h323=6221)(e164=6221)(loc=.)(node=root)(pbx=<user/>)(guid;bin=AABCCCBBE909D311AB6D0090331E02FD)(usn=70) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6223)(dn=6223)(h323=6223)(e164=6223)(loc=.)(node=root)(pbx=<user/>)(guid;bin=4F14DAA6E909D311AB6D0090331E02FD)(usn=71) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6212)(dn=6212)(h323=6212)(e164=6212)(loc=.)(node=root)(pbx=<user/>)(guid;bin=90582333E909D311AB6D0090331E02FD)(usn=72) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6213)(dn=6213)(h323=6213)(e164=6213)(loc=.)(node=root)(pbx=<user/>)(guid;bin=4A4E07D3E909D311AB6D0090331E02FD)(usn=73) mod cmd FLASHDIR0 add-item 102 (cn=Miratel 6231)(dn=6231)(h323=6231)(e164=6231)(loc=.)(node=root)(pbx=<user/>)(guid;bin=4534C05EE909D311AB6D0090331E02FD)(usn=74) mod cmd FLASHDIR0 add-item 102 (cn=Test 14)(dn=Test 14)(h323=9914)(e164=9914)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="79250575409d0c5138632ab6b0f52cef"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9914"/>)(pbx=<presence c="tel:"/>)(guid;bin=05C3CF8BE909D311B1460090330800AD)(usn=75) mod cmd FLASHDIR0 add-item 102 (cn=_ADMIN_)(pbx=<user pwd="2374552f27079ecbc79cd5494f0ad310"
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 24 OF 26
key="2526602380aea3b8a9b78918d4fdb2a0"/>)(guid;bin=00446E72E909D311A1750090330800AD)(usn=114) mod cmd FLASHDIR0 add-item 102 (cn=Test 13)(dn=Test 13)(h323=9913)(e164=9913)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="79250572409d0c5138732ab6b0ed2cef0000000000000000"/>)(pbx=<device hw="9913"/>)(guid;bin=4CAAE3EEE909D311A1800090331E02FD)(usn=159) mod cmd FLASHDIR0 add-item 102 (cn=VM)(dn=VM)(h323=VM)(e164=1000)(loc=.)(node=root)(pbx=<user text="VM"/>)(pbx=<pseudo type="vm"><script/></pseudo>)(guid;bin=8FE8FD87E909D311814E0090331E02FD)(usn=221) mod cmd FLASHDIR0 add-item 102 (cn=Test 15)(dn=Test 15)(h323=9915)(e164=9915)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2" pwd="79250574409d0c5138632ab6b0f52cef0000000000000000"/>)(pbx=<device hw="9915"/>)(pbx=<presence c="tel:"/>)(guid;bin=05CC64B3E909D311B1460090330800AD)(usn=245) mod cmd FLASHDIR0 add-item 102 (cn=FE)(dn=FE)(h323=9990)(e164=9990)(loc=.)(node=root)(pbx=<user/>)(pbx=<pseudo type="broadcast"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9990"/>)(guid;bin=9A6FA1CDE909D3118E570090331E02FD)(usn=289) mod cmd FLASHDIR0 add-item 102 (cn=Test 02)(dn=Test 02)(h323=2002)(e164=2002)(loc=.)(node=root)(pbx=<user filter="normal" cd-filter="normal" cfnr="15" busy-out="2" pwd="722c0473409d0c5138732ab6b0ed2cef0000000000000000"/>)(pbx=<device hw="2002"/>)(guid;bin=00CF6045E909D311B9570090330800AD)(usn=300) mod cmd FLASHDIR0 add-item 102 (cn=1101)(dn=1101)(h323=1101)(e164=1101)(loc=.)(node=root)(pbx=<user fake="1101" url="1101" cfnr="15" busy-out="2" no-dev="true"/>)(guid;bin=8EC103BDE909D311AB6D0090331E02FD)(usn=316) mod cmd FLASHDIR0 add-item 102 (cn=serak 9907)(dn=9907)(h323=9907)(e164=9907)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9907"/>)(guid;bin=2D8A4B93E909D311AB6D0090331E02FD)(usn=319) mod cmd FLASHDIR0 add-item 102 (cn=serak 9906)(dn=9906)(h323=9906)(e164=9906)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9906"/>)(guid;bin=5E4B4415E909D311AB6D0090331E02FD)(usn=320) mod cmd FLASHDIR0 add-item 102 (cn=serak 9905)(dn=9905)(h323=9905)(e164=9905)(loc=.)(node=root)(pbx=<user cfnr="15" busy-out="2"/>)(pbx=<grp name="FE" mode="active"/>)(pbx=<device hw="9905"/>)(guid;bin=ECFB6AC0E909D311AB6D0090331E02FD)(usn=321) mod cmd FLASHDIR0 add-item 102 (cn=DECT2)(pbx=<dect sys-id="31100466261507" ac="1234" ac-mode="SYSTEM" tones="0" kp="true" oem1="0x3ff" oem2="freq-eu" oem3="0" oem4="0x0"><coder model="G711A" frame="20"/><lcoder model="-" frame="60"/></dect>)(pbx=<pseudo type="dect"/>)(pbx=<user no-dev="true"/>)(loc=.)(node=root)(hide=true)(guid;bin=90454C8FE909D31194E60090331E02FD)(usn=571) mod cmd FLASHDIR0 add-item 102 (cn=DECT)(pbx=<dect sys-id="31100466261507" ac="1234" ac-mode="SYSTEM" tones="0" kp="true" oem1="0x7f" oem2="freq-eu" oem3="0" oem4="0x0"><coder model="G711A" frame="20"/><lcoder model="-" frame="60"/></dect>)(pbx=<pseudo type="dect"/>)(loc=.)(node=root)(hide=true)(guid;bin=019FAD78E909D311929A0090331E02FD)(usn=605) mod cmd FLASHDIR0 add-item 102 (cn=2404984201)(dn=2404984201)(h323=2404984201)(e164=2404984201)(auth=2404984201)(pbx=<user pwd="72280475795ac79cf7add588cf292fd3440d944bd5bedeee" admin="no"/>)(pbx=<gw name="DECT" user-assigned="true" dsp="4201"/>)(guid;bin=C33259D6E909D31191BA00013E136794)(usn=622) mod cmd FLASHDIR0 add-item 102
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 25 OF 26
(cn=2404984202)(dn=2404984202)(h323=2404984202)(e164=2404984202)(auth=2404984202)(pbx=<user pwd="72280475795ac79cf7aed5344f0ad310b8780c8ab5b6b9ec" admin="no"/>)(pbx=<gw name="DECT" user-assigned="true" dsp="4202"/>)(guid;bin=C4D94C05E909D31191BA00013E136794)(usn=623) mod cmd FLASHDIR0 add-item 102 (cn=2404984211)(dn=2404984211)(h323=2404984211)(e164=2404984211)(auth=2404984211)(pbx=<user pwd="72280475795ac79cf6add54933ff5dd118856888253e452f" admin="no"/>)(pbx=<gw name="DECT" user-assigned="true" dsp="4211"/>)(guid;bin=431464F7E909D3118BCB00013E136794)(usn=624) mod cmd FLASHDIR0 add-item 102 (cn=2404984203)(dn=2404984203)(h323=2404984203)(e164=2404984203)(auth=2404984203)(pbx=<user pwd="72280475795ac79cf7a8d50f4f0ad310203a0d8ab5b6b9ec" admin="no"/>)(pbx=<gw name="DECT" ipei="002020904856" dsp="4203" subs="b3f1bc6433bf49024425c8b9e9ae2f55"/>)(guid;bin=F398F03DE909D311AB2A00013E136794)(usn=627)
BROADSOFT PARTNER CONFIGURATION GUIDE – ASCOM IP DECT SERIES 20-BD5420-00 ©2013 ASCOM PAGE 26 OF 26
References
[1] Ascom Sweden AB. 2013. Installation and Operation Manual, IP-DECT Base Station and IP-DECT Gateway (software version 6.1.x), TD 92579EN. Available from Ascom Technical Reference Library through authorized resellers.
[2] BroadSoft, Inc. 2013. BroadWorks Device Management Configuration Guide, Release 19.0. Available from BroadSoft at broadsoft.com/xchange.
[3] BroadSoft, Inc. 2013. BroadWorks Redundancy Guide, Release 19.0. Available from BroadSoft at broadsoft.com/xchange.
[4] BroadSoft, Inc. 2013. BroadWorks SIP Access Device Interoperability Test Plan, Release 19.0. Available from BroadSoft at broadsoft.com/xchange.
[5] BroadSoft, Inc. 2013. BroadWorks Device Management Interoperability Test Plan, Release 19.0. Available from BroadSoft at broadsoft.com/xchange.