Amirruddin A K

BRIEF CV

Hj. Amirruddin Bin Abdul Kadir

Lecturer Faculty of Mechanical Engineering,

Universiti Malaysia Pahang, 26600 UMP Pekan,

Pahang, MALAYSIA. Tel: 609-4242211, Fax: 609-4242202

HP: 019-3434102 Email: amirruddin@ump.edu.my, amir_dengkil@yahoo.com

Academic Qualifications

1. M.Sc. (Manufacturing System Engineering), UPM. 2. M.Sc. (Quality and Productivity Improvement), UKM 3. B.Eng. (Hons) Mechanical and Material Engineering, UKM.

Working Experiences / Appointment

1. Apr 11 ~ to date Lecturer, Faculty of Mechanical Engineering (FKM), UMP. 2. Sept 09 ~ to date Deputy Dean (Academic & Student Development Affairs), FKM, UMP. 3. Oct 09 ~ Dec 09 Dean (Acting), FKM, UMP 4. Jan 08 ~ June 09 Attachment, Research of Automotive Centre, UTP 5. Apr 07 ~ Jan 08 Department Head (Automotive Engineering) FKM, UMP. 6. Apr 06 ~ Mac 07 Lecturer, Faculty of Mechanical Engineering (FKM), UMP. 7. Mac 04 ~ Apr 06 Head of Mechanical Engineering Programme, FIK, UNISEL. 8. Jan 03 ~ Feb 04 Lecturer, FIK, UNISEL 9. Sept 98 ~ Oct 02 Research Assistant, Thermo fluids Group, Mechanical Engineering

Department, Imperial College, London 10. Nov 97~ Sep 98 Engineer, at Dies Engineering Dept., PROTON BHD, Shah Alam, Selangor

Expert Area

Thermofluids, Combustion, Fuel Spray and Quality Management

Research Area / Research Interest

Alternative energy, Fuel Spray Research, Education Quality Management.

Professional Qualification / Membership / Affiliation / Experience

A) Paper/Journal Reviewer: 1. International Conference in Mechanical Engineering for Research 2011 (ICMER 2011) 2. 2

nd National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (2

nd

NCMER 2010) 3. National Conference in Mechanical Engineering for Research & Postgraduate Students 2010

(NCMER 2010) 4. National Conference Of Post Graduate Research (NCON-PGR’09) 5. International Conference on Software Engineering and Computer Systems (ICSECS 2009),

19~21Oct, Swiss Garden Resort & Spa, Kuantan, Pahang, Malaysia 6. Panel of Journal Reviewer for Mechanical Engineering Faculty, UMP. 7. International Journal of Automotive and Mechanical Engineering (IJAME) Malaysia 8. Reviewer of Manuscripts for First International Conference on 'Networked Digital Technologies (NDT

2009) (Co-sponsored by IEEE) 9. Reviewer of Manuscripts for the Journal of Industrial Technology, SIRIM Berhad

B) Membership of Professional Body 1. Graduate Engineer, Board of Engineer, Malaysia (BEM) (42215A)

2. Malaysian Society for Engineering & Technology (mSET) (00583)

Amirruddin A K

3. Institution of Mechanical Engineers (IMechE) (submitted application)

C) Conference Professional Experience. 1. Conference Chief in Keynote Speaker, 2

nd National Conference in Mechanical Engineering for

Research & Postgraduate Students, (2nd

NCMER 2010), 3-4 Dec 2010, UMP 2. Conference Co-Chairman, National Conference in Mechanical Engineering for Research &

Postgraduate Students, (NCMER 2010), 31st May 2010, UMP 3. Reviewer & Exhibitor, Malaysian Technical Universities Conference and Exhibition on Engineering

and Technology (MUCEET’09), 20~22Jun, Ms Garden, Kuantan, Pahang, Malaysia, 2009. 4. Session Chairperson, National Conference of Post Graduate Research (NCON-PGR 2009), 1st Oct

2009, UMP. 5. Technical Committee, Reviewer & Panel Expert, UMP/USM Post Graduate Research

Colloquium/Conference (PGRC 2009), Dec’09, UMP.

D) Administrative Committees Involved 1. Vice President, UMP Academic Society, 2012-2014. 2. MBJ UMP Committee Member for 2011-2012 Session 3. Taskforce Member, UMP E-Learning System, 2011 4. Leader, 2011 FKM EAC Task Force for BMM Accreditation 5. Advisor, UMP Professorial Lecture Committee, 2009 ~ 2010. 6. Perlantikan Sebagai Penggubal Soalan Penilaian Bertulis dan Pemeriksa Kertas Jawapan Penilaian

Tahap Kecekapan (TK3) bagi Staf Bukan Akademik, Feb 2010 7. Leader, 2010 FKM EAC Task Force for BMA and BMF Accreditation 8. Perlantikan sebagai Penilai Praktikum Pensyarah Baru UMP, 2009-2010 9. Co Chairman, National Conference in Mechanical Engineering for Research & Postgraduate Student

(NCMER 2010) 10. Advisor, Kelab Kebajikan & Sukan Staf Fakulti Kejuruteraan Mekanikal, Jan 2010 ~ Dec 2011 11. Committee member of Automotive Excellence Centre Administration, Feb 2010 ~ Jan 2011 12. Advisor, UMP Committee for PERODUA Eco-Challenge, 2010. 13. Advisor, UMP Committee for SHELL Eco-Challenge, 2010. 14. Advisor, UMP Committee for EIMA-RACE, 2010. 15. Perlantikan Sebagai Ketua Task Force Program B. Eng Automotif model Jerman 16. Chairman, New Programme Setup - Bachelor of Marine Engineering, 2009 ~2010 17. Advisor, United Kingdom Technology and Engineering Exposure 2010 (UTEX’10) 18. Committee member for task force Professorial Talk, FKM, UMP, Dec 2009 19. Member, UMP Jawatankuasa Tetap Senat (JKTS), Akademik, since 2009. 20. Leader, 2010 FKM Industrial Advisory Panel Committee Meeting 21. Leader, FKM Automotive Laboratory, 2009 to date 22. Advisor, UMP Auto Show by SAE Student Chapter, 2009. 23. Advisor, UMP Committee for PERODUA Eco-Challenge, 2009. 24. Advisor, FKM, Mechapro, 2009 to date 25. Member, UMP Integrated Management System Committee, 2009. 26. Member, UMP Research Committee, since 2009. 27. Member, UMP Committee for Malaysian Qualification Agency Audit 28. Member, UMP International Journal of Automotive and Mechanical Engineering (IJAME) Setup

Committee (2009) 29. Member, UMP Automotive Excellent Center Auto News Bulletin Editorial Board (2009 to date) 30. Chairman, FKM ISO9001 Committee, (2009 to date) 31. Member, 2009 FKM EAC Task Force for BMM Accreditation 32. Advisor, FKM EAC Task Force for OBE Transformations 33. Member, JK Kajian Pengubalan Dasar Akademik UMP 34. Member, JK Penganugerahan Fakulti 35. Member, Faculty Research and Postgraduate Committee, 2006 to date 36. Member, Faculty Interviewer Committee, 2006 to date 37. Member, Faculty Technical Committee (JKTF), 2006 to date. 38. Coordinator, Automotive Eng. Dept. Examination, Apr’06 to Dec’07. 39. Member, FKM EAC Task Force for BMM Accreditation, Apr’07~Aug’07. 40. Sub-Leader, New Faculty Setup Committee (Fak. Kej. Pembuatan), Apr’07 to Jan’08. 41. Member, Faculty Academic and Examination Committee, Apr’06 to date. 42. Chairman, Automotive Engineering Department Meeting. Apr’06 to Jan’2008. 43. Leader, Thermodynamics, Heat Transfer and Fluid Mechanic Laboratory setup. 2006~2008. 44. Leader, Faculty Stakeholder Committee, 2006. 45. Member, Academic Clinic MechaPro Committee, Apr’06 to date.

Amirruddin A K

Teaching Experience

1. SEPT 1/2012/2013 (UMP)

BMM3513 Heat Transfer, 3 credits (42 Students) BMA4733 Road Vehicle Aerodynamics, 3 credit (33 Students) BMA4743 Automotive Design & Styling, 3 credits (31 Students) BMM3922 Final Year Project 1, 2 credits (6 Students)

2. SEPT 1/2011/2012 (UMP) BMM2313 Thermodynamics 1, 3 credits (30 Students) BMA4703 Automotive Technology, 3 credit (30 Students) DMM1912 Mechanical Technology Lab 1 BMM3924 Final Year Project 2, 4 credits (5 Students) DMM3914 Final Year Project, 4 credits (1 Students)

3. JAN 2/2010/2011 (UMP) BMA4713 Internal Combustion Engine, 3 credits (30 Students) BMA4703 Automotive Technology, 3 credit (30 Students) DMM1912 Mechanical Technology Lab 1 BMM3924 Final Year Project 2, 4 credits (5 Students) DMM3914 Final Year Project, 4 credits (1 Students)

4. JUL 1/2010/2011 (UMP) BMA4713 Internal Combustion Engine, 3 credits (50 Students) DMM3653 Automotive Technology, 3 credit (40 Students) DMM1912 Mechanical Technology Lab 1 BMM3924 Final Year Project 2, 4 credits (5 Students) DMM3914 Final Year Project, 4 credits (1 Students)

5. MAY 3/2009/2010 BMM3513 Heat Transfer, 3 credits (22 Students)

6. DEC 2/2009/2010(UMP) BMA4703 Automotive Technology (45 students) DMM2543 Thermodynamics (36 students) DMM1912 Mechanical Eng Lab (33 students) BMM3912 Final Year Project 1, 2 credits (5 Students) BMM4999 Industrial Training, 9 credits (14 students) BMM4993 Industrial Training Report, 3 credits (14 students)

7. JUL 1/2009/2010 (UMP) BMM1523 Engineering Material, 3 credits (240 Students) BMM1011 Fundamental of Engineering (c), 1 credit (240 Students) BMM3924 Final Year Project 2, 4 credits (3 Students)

8. JAN 2/2008/2009 (UTP) MAB1053 Mechanical Engineering Thermodynamics 1, 3 credits (3+0) (47 Students) MAB 2043 - Solid Mechanics, 3 credits (115 Students)

9. JUL 1/2008/2009 (UTP) MAB1053 Mechanical Engineering Thermodynamics 1, 3 credits (3+0) (105 Students) MAB 3062 Fluid Mechanics II Lab, 2 credits (168 Students) MAB 2043 - Solid Mechanics, 3 credits (138 Students)

10. JAN 2/2007/2008 (UTP) MAB1053 Mechanical Engineering Thermodynamics 1, 3 credits (3+0) (128 Students) MAB 3062 Fluid Mechanics II Lab, 2 credits (117 Students)

11. JUL 1/2007/2008 (UMP) BMM4713 Internal Combustion Engine, 3 credits (51 Students) BMM3912 Final Year Project 1, 2 credits (5 Students)

12. DEC 2/2006/2007 (UMP) BMM2523 Thermodynamics 2, 3 credits (3+1) (225 Students) BMM3924 Final Year Project 2, 4 credits (10 Students)

Amirruddin A K

BMM4999 Industrial Training (5 students)

13. JUL 1/2006/2007 (UMP) BMM2513 Thermodynamics I, 3 credits (3+1) (138 Students) BMM3912 Final Year Project 1, 2 credits (10 Students) BMM4993 Industrial Training (4 students) DMM3912 PTA 2, 2 credits (2 students) DMM4993 Industrial Training (3 students)

14. MAY 3/2005/2006 (UMP)

BMM2523 Thermodynamics 2, 6 credits (6+2) (37 Students)

15. DEC 2/2005/2006 (UNISEL) KMD1191 Makmal I, 1 credit (3+0) (22 Students) KMD1291 Makmal II, 1 credit (3+0) (19 Students) KMD3191 Makmal III, 1 credit (6+0) (22 Students) KMD3223 Enjin Pembakaran Dalaman, 3 credits (10 students) KMS2291 Mechanical Workshop II, 1 credit (3+0) (7 students) KMS3223 Internal Combustion Engine, 3 credits (3 students) KMS3291 Lab IV_Thermal Laboratory, (6+0) (22 Students) KMS4233 Advance Fluid Mechanics, 3 credits (28 Students)

16. JUL 1/2005/2006 (UNISEL)

KMS3223 Internal Combustion Engine, 3 credits (23 Students) KMD3223 Enjin Pembakaran Dalaman, 3 credits (5 Students) KMD1191 Makmal I, 1 credit (3+0) (19 Students ) KMD3191 Makmal III, 1 credit (6+0) (22 Students) KMS2191 Mechanical Workshop I, 1 credit(3+0) (16 Students) KMS2291 Mechanical Workshop II, 1 credit (3+0) (20 Students) KMS3291 Lab IV_Thermal Laboratory, 1 credit (6+0) (18 Students)

17. DEC 2/2004/2005 (UNISEL)

KMS2191 Mechanical Workshop I, 1 credit (9+0) (48 Students) KMS2291 Mechanical Workshop II, 1 credit (3+0)(18 Students) KMS3291 Lab IV_Thermal Laboratory, 1 credit (6+0) (20 Students) KMD2392 Makmal II, 1 credit (3+0) (9 Students) KMS4233 Advance Fluid Mechanics, 3 credits (3+0)(18 Students)

18. JUL 1/2004/2005 (UNISEL) KMS1191 Material Laboratory, 1 credit (12+0) (35 Students) KMS2191 Mechanical Workshop I, 1 credit (9+0) (23 Students)

19. DEC 2/2003/2004 (UNISEL) KMS2333 Fluid Mechanics II, 3 credit (3+1) (22 Students) KMS3223 Internal Combustion Engine, 3 credit (3+0) (17 Students) KMD3223 Enjin Pembakaran Dalaman, 3 credit (3+0) (23 Students)

20. JUL 1/2003/2004 (UNISEL) KMS2333 Fluid Mechanics II, 3 credit (3+1) (17 Students) KMS3223 Internal Combustion Engine , 3 credit (3+0) (17 Students)

21. DEC 2/2002/2003 (UNISEL) KMS1333 Fluid Mechanics I, 3 credit (3+1) (17 Students) KMS2333 Fluid Mechanics II, 3 credit (3+1) (21 Students)

MSc Project Supervision

No. Academic Year Name of Student Title of Project

1 2010 – 2012 Nur Cholis Push Belt CVT Development for Motorcycle

Amirruddin A K

Degree Final Year Project Supervision

No. Academic Year Name of Student Student ID Title of Project

1 2012-2013 Muzammil Bin Mohamad Alias

MH09038 Study of spray breakup and mixture in a gasoline direct injection engine using simulation

2 2012-2013 Mohd Hilmi Bin Mohd Zin

MA09037 Computational study of fuel spray structure

3 2012-2013 Mohd Hafizuddin Bin Abdul Rahim

MH09106 Spray development and combustion simulation for simple injection chamber

4 2012-2013 Mohammad Bin Ismail MH09004 The study of spray characteristics by using video image processing

5 2012-2013 Noor Azuani Binti Suliman

MH09039 Influence of nozzle orifice geometry on flow and spray characteristics

6 2012-2013 Muhammad Amin MH10061 Numerical simulation study in gasoline combustion characteristics

7 2011-2012 Wan Mohd Rashdan

Bin Wan Mansor MH08082 Development of High Pressure Spray Triggering

8 2011-2012 Wan Mohd Hazwan

Bin Wan Ariff MH09010

Video Imaging study of Ethanol Gasoline blends fuel Spray

9 2011-2012 Mohd Amirul Husaini

Bin Saat MH08068

Measurement and numerical simulation of internal air flow in a FKM admin Office Ventilation systems

10 2011-2012 Mohamad Hushairy

Bin Abdul Jalil MH08062

Simulation of the Performance of an Air-conditioning System

11 2011-2012 Nur Syafiqah Binti

Mohd Nawawi MH08072 Study of Micro Spray Nozzles

12 2009 – 2010 Abraham Tangin MH08134 Experimental Measurement of Liquid Atomisation

13 2009 – 2010 Muhammad Ashraf Ali Zubir

MH08009 Visualization and Analysis of the Impact of Fuel-Sprayed Particles

14 2009 – 2010

Wan Muhammad Mukhlis Wan Ab Latif

MH08004 Numerical Simulation of Liquid atomisation

15 2009 – 2010 Raja Sharul Azuan Raja Kamaralzaman

MH08087 Development of Liquid Spray Triggering and Control

16 2009 – 2010 Abdul Hadi Abd Majid MH08012 An optical study of Ethanol Gasoline blends with and without heating

17 2008 – 2009 Tengku Fakhruzzaman Bin Tengku Yusoff

MA05042 Computational Analysis of Heat Transfer rate using Thermal Response Factor Method

18 2008 – 2009 Ahmad Faiz Bin Fauzee

MA05048 Finite Element Analysis of Composite core under Compression Test

19 2006 – 2007 Nasrul Hadi Bin Johari MA05085 Design and Fabricate Motorcycle Dynamometer (Inertia Roller)

20 2006 – 2007 Mohd Hanif Bin Mokhtar

MC04012 Design and Fabricate Motorcycle Dynamometer (Stand and Platform)

21 2006 – 2007 Muhammad Asri Bin Che Ahamad

MD04022 Ethanol as Fuel for Gen-set

22 2006 – 2007 Rosmazi Bin Rosli@Pang See Hoon

MA05062 Simulation of Two Stroke, Single Cylinder SI Engine by using GT-Power

23 2006 – 2007 Mohd Zulkhairi Bin Mohd Nor

MH04023 Fuel Injection Conversion and Turbocharger on motorcycle 150cc four stroke engine

24 2006 – 2007 Mohd Nurwaqiuddin Bin Jusoh

MH04008 Performance Analysis for Varies Type of Spark Plug (One cylinder)

Amirruddin A K

25 2006 – 2007 Muhamad Nu'man Bin Zolkofle

MF04002 Pulse Jet Tube Development

26 2006 – 2007 Amirulnizam Bin Mohd MA04001 Build the Brake Structure Educational System Model

27 2006 – 2007 Malek Bin Yusof MA04002) Build the Clutch Structure Educational System Model

28 2006 – 2007 Ahmad Mursyidi Bin Hamzah

MH05003 Build the Starter & Alternator Educational System Model

29 2006 Mohd Faizal B. Che Saari

Building the Basic Education Refrigerator System

30 2006 Abdul Hadi B. Hashim Build the Test Rig for Air-conditioning System

Diploma Final Year Project Supervision

No. Academic Year Name of Student Title of Project

1 2010-2011 Mohd Azahan Bin Mohd Yusuff

Test Rig Development for High Pressure Spray.

2 2006 – 2007 Mohd Azahari B. Mohd Nasir

Fabrication of Basic Hydraulic Bench for Fluid Mechanics Laboratory

3 2006 – 2007 Mohd Syafrul Hafis B. Safar

Fabrication of Education Test Rig for Car Air-conditioning System

List of Publications

A) International and National Journal

1. Development of a Hovercraft Prototype with an Aluminium Hull Base. A.K. Amiruddin, S.M. Sapuan

and A.A. Jaafar. International Journal of the Physical Sciences. Vol. 6(17), pp. 4185-4194, 2 September, 2011. ISSN 1992 -1950

2. A Computational Comparison between Revetec Engine and Conventional Internal Combustion Engines on the Indicated Torque. Maisara Mohyeldin Gasim, A. K. Amirruddin, and A. Shahrani. WASET 76: 399-401. SCOPUS

3. Engine Performance of a Four Cylinder SI Engine Using Gasohol Blended Fuel, A. K.Amirruddin, A. A. Abdul Rashid and S. M. Sapuan, International Communications in Heat and Mass Transfer (Waiting for review)

4. Burner Flame Observation by Sideways Looking Probe Camera Image, A.K. Amirruddin and S.M. Sapuan. Indian Journal of Engineering & Material Sciences, National Institute of Science Communication and Information Resources (NISCAIR) (waiting for acceptance)

5. Effect of Fuel Sulphur on N2O Diesel Emissions, International Journal of Research and Applied Science,

Agung Sudrajad, Nishida Osami, Fujita Hirotsugu, Amiruddin Abdul Kadir , Ismail Ali, Sugeng Ariyono, Gigih Priyandoko, Volume 3 (1) April 2010. pp. 1-7. ISSN: 2076-734X, EISSN: 2076-7366

6. Menilai Perhubungan di antara Hasil Pembelajaran Kursus (HPK) Dengan Hasil Pembelajaran Program (HPP), Jurnal UTM. A. K. Amirruddin and S. M. Zuki. 51(E) Dis. 2009: 1-24

7. Analysis of Glass Fibre Reinforced Epoxy Composite Hovercraft Hull Base, A.K. Amiruddin, S.M. Sapuan and A.A. Jaafar, Materials & Design, 29 (2008) 1453–1458 (Elsevier)

8. Fabrication of an Aluminium Hull Base Hovercraft Prototype. A. K. Amirruddin, S. M. Sapuan and A. A. Jaafar. MARINE-Journal of Marine Machineries Technology, Institute of Technology Surabaya (ITS) Surabaya Indonesia, Volume 3, Nomor 3, pp: 181 - 187, March 2007. ISSN: 0216-9886.

9. Pulverised Coal Flame Video Image Processing. A. K. Amirruddin and S. M. Sapuan. MARINE-Journal of Marine Machineries Technology, Institute of Technology Surabaya (ITS) Surabaya Indonesia, Volume 3, Nomor 2, pp: 102 - 111, November 2006. ISSN: 0216-9886.

Amirruddin A K

10. Review of Hovercraft Application and Development, A. K. Amirruddin, S. M. Sapuan and A. A. Jaafar, Journal of Applied Technology, Vol. 3, No. 2 Oct 2005 (94-105) ISSN 1693-2536

B) International and National Conference Papers

1. The Potential of Wind and Solar Energy in Malaysia East Coast: Preliminary Study at Universiti Malaysia Pahang (UMP). M.M.Noor, A.K.Amirruddin, K.Kadirgama, K.V.Sharma. Energy and Sustainability 2011, 11 - 13 April 2011, Alicante, Spain

2. Imaging Investigation on the Spray Penetration of Gasohol Blends Image. A.K. Amirruddin, M. H.

Razali, and Emishaw D. Iffa. 13th International Conference on Computer and Information Technology

(ICCIT 2010), 23-25 December 2010, AUST, Dhaka, Bangladesh

3. Application of Diesel Oil-Water Emulsion in Diesel for Enviromental Sustainability. Agung Sudrajad, Fujita

Hirotsugu, Amiruddin Abdul Kadir, Ismail Ali. Proceeding of International Conference on Sustainable

Urbanization, December 2010, Hongkong.

4. Emission Index as an Indicator of Carbon Dioxide Emission from Personal Transports. T.T. Mon, D. Ramasamy, A.K. Amirruddin, R.A. Bakar, I. Ali. The International Conference on Environment 2010 (ICENV 2010), Penang, Malaysia, 13-15 December 2010

5. Effect of Fuel Temperature for Single Cylinder Diesel Engine Operating with Ethanol. R.Rahim, R.Mamat, M.Y.Taib, A.A.Kadir. International Conference on Advances in Mechanical Engineering (ICAME2010), 2-5 December 2010, Kuala Lumpur.

6. Hybrid Finite Element and Monte Carlo Analysis of Cracked Pipe. M.R.M. Akramin, A. Zulkifli, A.K.

Amirruddin, N.A. Alang and M.S. Jadin. 2nd

National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (2

nd NCMER 2010), 3-4 December 2010

7. The Effect of CAM Profile on Cylinder Pressure in Revetec Engine. Maisara Mohyeldin Gasim, A. K.

Amirruddin and A. Shahrani. 2nd

National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (2

nd NCMER 2010), 3-4 December 2010

8. Design of Connecting Rod of Internal Combustion Engine: A Topology Optimization Approach. Mohd

Shamil Shaari, M.M. Rahman, M.M. Noor, and K. Kadirgama and A.K. Amirruddin. 2nd

National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (2

nd NCMER 2010),

3-4 December 2010

9. Effect of Fuel Temperature For Single Cylinder Diesel Engine Operating With Ethanol. R.Rahim, R.Mamat,M.Y.Taib and Amirruddin AK. 2

nd National Conference in Mechanical Engineering for

Research & Postgraduate Students 2010 (2nd

NCMER 2010), 3-4 December 2010.

10. Quantitative Measurement of Emissions of Water / Oil Emulsified Fuel in Diesel Engine, Agung Sudrajad, Fujita Hirotsugu, Amiruddin Abdul Kadir, Ismail Ali, Sugeng A, Gigih P. 2

nd International

Conference on Quantitative Science and Its Applications (ICOQSIA 2010), 2-4 Nov 2010, The Gurney Resort Hotel & Residences, Penang, Malaysia

11. Wind Potential at East Coast Malaysia: Preliminary Study at Pekan. K.Kadirgama, M.M.Noor,

K.V.Sharma, A.K.Amirruddin, R.A.Bakar. 2nd International Conference on Environmental Management (ICEM 2010). 25-28 October 2010, Centre for Environment, IST Jawaharlal Nehru Technological University Hyderabad, A.P; India

12. Improvement of Water-Oil Emulsion for Marine Diesel Engine by Experimental Investigation. Agung

Sudrajad, Fujita Hirotsugu, Nishida Osami, Amiruddin Abdul Kadir, Ismail Ali, Gigih Priyandoko, Sugeng Ariyono. Proceeding of Techno Ocean Conference, October 2010, Kobe Japan

13. Experimental Emissions Analysis of Diesel Oil Water Emulsion. Agung Sudrajad, Fujita Hirotsugu,

Amirruddin Abdul Kadir, Ismail Ali, Sugeng A, Gigih P. World Engineering Congress 2010, Kucing Sarawak, August 2010

14. An Insertion Probe for Flame Behavior Observation. A.K. Amirruddin, H. Mohd Razali, and I. Abdul Rahim. Proceedings of MUCET2010 Malaysian Technical Universities Conference on Engineering and Technology June 28-29, 2010, Bayview Hotel, Melaka, Malaysia

Amirruddin A K

15. Development of A High Pressure Chamber For Spray Vessels. A. K. Amirruddin, M. H. Razali, Agung, and A. Ismail. National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (NCMER 2010), ISBN: 978-967-5080-95-1.

16. Analysis of Automotive Drive Shaft Using Finite Element Method. M.M.Noor, K.Kadirgama, M.M.Rahman, A.K.Amirruddin. National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (NCMER 2010), ISBN: 978-967-5080-95-1, pg. 63-67.

17. Development of a Two-Stroke Free Piston Engine (FPE) for the Application of a Linear Generator (LG). Mohd Razali H., Amirruddin A.K, Zamri M.

and Abdul Rashid A.A.National Conference in Mechanical

Engineering for Research & Postgraduate Students 2010 (NCMER 2010), ISBN:978-967-5080-95-1.

18. A Vehicle Body Drag Analysis Using Computational Fluid Dynamics. D.Ramasamy, K.Kadirgama, A.K.Amirruddin, M.Y.Taib. National Conference in Mechanical Engineering for Research & Postgraduate Students 2010 (NCMER 2010), ISBN: 978-967-5080-95-1.

19. Gasoline-Ethanol (Gasohol) Fuel Blend Spray Characterization using Digital Imaging and Image Processing. Emishaw D. Iffa, A. K. Amirruddin, S. Shaharin Anwar and A. Rashid. A. Aziz. The International Conference on Signal and Image Processing Applications 2009 (ICSIPA09), 18-19 November 2009, Kuala Lumpur. ISBN: 978-1-4244-5560-7

20. A High Pressure Chamber Development for the Investigation Of Spray Characteristics. Amirruddin A. K., Firmansyah, Razali M. H, Nicolas P. and Rashid A.A.A. International Conference on Applications and Design in Mechanical Engineering, (ICADME 2009), Universiti Malaysia Perlis (UniMAP), Kangar, Malaysia. 11-13, October 2009

21. Sideways Looking Probe Camera Image Observation for Burner Flame A.K. Amirruddin, H. Mohd Razali, and I. Abdul Rahim. The International Conference on Software Engineering and Computer Systems (ICSECS’09), 19-21 October 2009, at Swiss Garden Resort & Spa, Kuantan

22. Gasohol Blends Spray Visualisation by Using Video Image. A.K. Amirruddin, M. H.

Razali ,

Firmansyah, S. Shaharin Anwar and A. A. Abdul Rashid. Proceedings of MUCEET2009, Malaysian Technical Universities Conference on Engineering and Technology, June 20-22, 2009, pp.392-394, MS Garden, Kuantan, Pahang, Malaysia

23. Effect of Gasohol Blends on a Four Cylinder, Port Fuel Injection Engine Performance, Amirruddin A.

K., Rahim I., Semin S., Firmansyah and Abdul Rashid A. A. International Conference on Advances in

Mechanical Engineering 2009-ICAME 2009, 24-25 June 2009, Shah Alam. ISBN: 978-967-305-355-1, 2009

24. Burner Flame Observation by Using High Speed Video Image. A. K. Amirruddin, M. M. Rashidi and S.

M. Sapuan. (MUCET 2008), ISBN 978-983-42358-4-0, 10-11 March 2008, Kangar, Perlis. 25. Burner Flame Image Analysis Techniques. National Conference on Software Engineering & Computer

Systems 2007 (NaCSES'07), 20-21 August 2007, Legend Resort, Cherating. A. K. Amirruddin and S. M. Sapuan.

26. Menilai Perhubungan di antara Hasil Pembelajaran Kursus (HPK) Dengan Hasil Pembelajaran Program

(HPP). Amirruddin Abdul Kadir , Mohammad Alinor Abdul Kadir dan Khairul Anuar Mohd Ali. Engineering Education Conference 2007 (Imparting SCL Approaches), 3 May 2007, M. S. Garden Hotel, Kuantan

27. Assessment of Flame Stability in Swirl-Stabilised Burners and Relation to Coal Properties. International

Conference on Coal Science Dec 1999, Taiyuan, China

C) Report

1. Observations of Volatile Flame Envelopes in Full-Scale Utility Boiler, DTI Proposal, July 2000, DTI Cleaner Coal Technology Research & Development Programme

2. Advance Monitoring Using Imaging for Combustion in Power Station Boilers, DTI Cleaner Project Profile

121, May 2001

Amirruddin A K

3. Advance Near Burner Flame Diagnostics for Ignition & Stability Studies on Full-Scale Pulverised Coal

Flames, DTI Cleaner Project Profile 207, April 2002

List of Book

1) Amirruddin Abdul Kadir, “Ringkasan Enjin Pembakaran Dalaman”, UMP Press, 2011. (Writing in

Progress). 2) “Alternative for Tomorrow: Core Development In The Near Future”, Reviewer, UMP Press, 2010

List of Consultancy

1. Initial Consultation with NISSAN 2. Initial consultation with MODENAS 3. Consultation for Perusahaan Otomobil Nasional Bhd. (PROTON): Proton Exora & Pesona Value,

Analysis & Value Engineering (VAVE): Fuel Tank, Member, Jul ~ Dec 2009 (Completed) 4. Consultation as a group leader for I.S.A.T. (Institut Supérieur de l’Automobile et des Transports), France

went through internship in high pressure spray development project. Aug ~ Dec 2008. (Completed)

List of Research / Project

1. Development of Probabilistic Finite Element Analysis for Lumbar Spine Biomechanics, grant amount of

RM30,500 as Project member (Sept.10 ~ Sept.11) 2. Mixture Formulation and Combustion Characteristics of Diesel-Hydrogen Dual Fuel Engine, FRGS

(15 Sept.10 ~ 14 Sept.12) 3. Investigation of Gasoline-Ethanol Blends Spray Characterization and Mixing., which grant amount of RM

40,000, as Project Leader (Sept.09 ~ Aug.10) 4. Design of mixer System for Diesel-Water Emulsion as New Renewable Fuel, grant amount of RM40,000 as

Project member (Oct.09 ~ Sept.10) 5. Development of Revetec Engine Cam for Internal Combustion Engines, grant amount of RM40,000 as

Project member (Oct.09 ~ Sept.10) 6. An Investigation of Wind Power Potential at Kuala Pahang, Pekan., grant amount of RM40,000 as Project

member (Oct.09 ~ Sept.10) 7. “Series Hybrid Electric Vehicle Cost-Effective Powertrain Component Development” which grant

amount of RM 200,000. RDU070305 as Assistant Director (May’06 ~ May’07) (Status: Completed). Major output: i. New Design of Hybrid Electric Vehicle ii. Paper. These project won medal Silver Medal, Anugerah Projek Penyelidikan Terbaik UMP, 2007.

Research Achievements / Awards

1. Anugerah Perkhidmatan Cemerlang, (APC) Universiti Malaysia Pahang, (UMP Excellent Service

Award), 2009 2. Research Award: Bronze – Project Title: Support Vector Machine Learning Method to Predict

Recycling Strategy for Electronic Equipments, Malaysia Technology Expo (MTE) 2010, Researcher, 4~6 Feb, PWTC, Kuala Lumpur.

3. Best Poster Presentation Award for the 1st NCMER 2010 4. Anugerah Cendekia Bitara Merit Award Journal 2008 - Analysis of Glass Fibre Reinforced Epoxy

Composite, Journal of Material & Design Scopus, ISI Indexing and 1.107 Impact Factor 5. Excellence Service Certificate, Faculty of Mechanical Engineering, UMP, 2007 6. Excellence Service Certificate, Faculty of Mechanical Engineering, UMP, 2006

Amirruddin A K

List of Course / Conference Attended

Date Program Status

10 Oct 2011 ANUGERAH AKADEMIK NEGARA (AAN), PWTC Participant

15-17 Aug 2011 BENGKEL PERKHIDMATAN UNIVERSITI, JPT Participant

25 Jul 2011 PENERBIT UMP: BICARA BAHASA (SIRI 2) ; 25 JUL 2011, 08:00 AM;

AUDITORIUM PERPUSTAKAAN Participant

20 Jul 2011 ROUTE TO PROFESSIONAL ENGINEER BY IR. KAMAL KUNJI, VICE

CHAIRMAN OF IEM EAST COAST Participant

13 Jul 2011 WORKSHOP ON WRITING AND PUBLICATION OF SCIENTIFIC WORKS

(TO PRESERVE THE SCIENTIFIC) SERIES 1/2011 Participant

05 May 2011 TEACHING WITH TECHNOLOGY : INTRODUCTION TO MOODLE Participant

23-24 Apr 2011 SEMINAR KARNIVAL USAHAWAN PEKAN PAHANG 2011 Participant

Dec 2010 PELAN STRATEGIK UMP 2011-2015 Participant

11 Nov 2010

Understanding Learning and Teaching in Higher Education: Improving the

Quality of Student Learning in Higher Education, AKEPT, Concorde Hotel,

Shah Alam

Participant

21 Oct 2010 Green Technology and Renewable Energy Participant

28~30 Jun 2010 Malaysian Technical Universities Conference on Engineering and

Technology, MUCET2010, Bayview Hotel, Melaka. Presenter

23~24 Jun 2010 FKM Continuous Quality Improvement (CQI) for Teaching Plan, UMP,

Gambang.

Panel /

Participant

26 May 2010 National Conference in Mechanical Engineering for Research &

Postgraduate Studies (NCMER 2010)

Conference

Co-Chair

18~20 Feb FKM External Examiner Meeting, Vistana, Kuala Lumpur Facilitator &

Expert Panel

16~17 Feb 2010 AKEPT Training: Scenario of the Global Higher Education, Pan Pacific,

KLIA. Participant

12 Feb 2009 Training Panel Penemuduga Program Ijazah Luar Negara (PILN) 2010 at

INTIM Kemaman, Terengganu Participant

27~28 Jan 2010 Customized MATLAB Fundamentals & Image Processing Participant

22~23 Dec 2009 Introduction and Awareness Training ISO 9001:2008, FKM, UMP Participant

15~17 Dec 2009 USM & UMP Post Graduate Colloquium 2009 (PGRC’09), UMP. Panel Chair.

13 Dec 2009 FKM Team Working (TWC), Summerset Resort, Kuala Rompin. Group

Leader

10~12 Dec 2009 FKM Outcome Based Education and Continuous Quality Improvement

Meeting and Workshop, Summerset Resort, Kuala Rompin.

Group

Leader &

Participant

8~10 Dec 2009

Training for Trainers (TOT) for Engineering Accreditations Council

(EAC) Requirement, by Assoc. Prof. Ir. Megat Johari Megat Mohd Noor,

Legend Resort, Cherating.

Participant

30 Nov 2009 AKEP Training: Transformation of 21

st Century Learning: the impetus for

innovation Participant

26 Nov 2009 Seminar on Problem-Based Learning: PBL as a Dynamic Teaching &

Learning Tool, Impiana KLCC Hotel by CEC, UTHM Participant

6~8 Nov 2009 Bengkel Pemurnian Document MS ISO 9001 : 2008 Chairman

18~23 Oct 2009 Academic Mesir Visit Lead

Delegates

1 Oct 2009 Organising Committee, National Conference of Post Graduate

Research (NCON-PGR 2009)

Panel

Chair and

Amirruddin A K

Reviewer

15~16 Sept 2009 2nd FKM EAC Documentation and Report Preparation for Bachelor of

Mechanical Engineering, Holiday Villa, Cherating. Leader

9 ~ 10 Sept 2009 FKM EAC Mock Audit for BMM Programme by Ir Lai and Ir Rasdan, UMP

Pekan Campus. Group

Leader

28 Aug 2009 FKM OBE Workshop: Teaching Plan and Final Examination Vetting,

Vistana Hotel, Kuantan

Chairman for

Thermofluids

Expert

Problem-Based Learning: Innovation, Learning And Leadership, Cyberjaya

Participant

20~22 Jun 2009

Malaysian Technical Universities Conference and Exhibition on

Engineering and Technology (MUCEET 2009), Ms Garden, Kuantan,

Pahang, Malaysia.

Presenter

18-19 June 2007 Induction Course Professional group for UMP Special Module – UMP. Participant

12-24 May 2007 Induction Course Professional group for overall Module – Legend Resort,

Cherating. Participant

13-15 Jul 2007 Teaching and Learning Course, Module 2 – Legend, Cherating. Participant

6 Jul 2007 Outcome Base Education Training, Sg Tembling Resort, Kuantan. Participant

14-18 Mar 2007 Research Methodology (SLAB) Course – Prof. Dr. Fauzi(UTM) – UMP. Participant

28 Mar 2007 FRGS (Fundamental Research Grant Scheme) Proposal Writing Workshop,

Prof. Dr. Awaluddin (UTM) – MS Garden, Kuantan. Participant

Jan 2007 A Seminar on Globalisation of University Intellectual Property Rights (IPR)

by TNC (Research & Innovation) Office Participant

June 2006 Virtual Proven Ground (VPG) Software Training by VTC Sdn Bhd, Kelana

Jaya Participant

May 2005 Continual Quality Improvement through the Outcome-Based Approach

(OBE) Workshop by EAC, LAN and UKM at Mints Hotel,

Participant

Feb 2005 IRPA Online Grant Application Workshop by UPPU, UNISEL, Participant

2004 Mar120: MSC. PATRAN and MSC. Marc NASTRAN NAS120, Participant

2004 MSC. PATRAN and MSC. NASTRAN NAS120, training by MSC Software

at UNISEL

Participant

2004 IRPA Manual Grant Application Workshop by UPPU, UNISEL Participant

2004 Exam preparation and handling procedure workshop by Registrar Office,

UNISEL

Participant

2004 LAN Document preparation procedure workshop by Registrar Office,

UNISEL

Participant

2004 ‘Make Digital Manufacturing Drive Reality’ seminar by National CAD/CAM

Center, SIRIM

Participant

2003

Advanced CAD/CAM/CAE and Manufacturing Simulation Solution for

Higher Learning Institution by MAWEA Industries Sdn Bhd at ADTEC, Shah

Alam

Participant

2003 Workshop for AUTOCAD Mechanical 6 by i-VEK Technology (M) Sdn Bhd

at UNISEL

Participant

2003 Assistant Councillor Course by Registrar Office at UNISEL Participant

2003 I-DEAS Upgrading in CAD/CAM/CAE and NCSIMUL by CADDCAM

Solution Sdn. Bhd. at Mentari Business Park, Petaling Jaya

Participant

2003 CATIA V5 Solution basic and intermediate training by DLAB (M) SDN BHD

at Bukit Damansara

Participant

2003 IDEAS CAE (Thermal Analysis) training by CADDCAM Solution at UNISEL Participant

2002 COSMOS/Works Training by School Of Engineering, Universiti Malaysia

Sabah

Participant

2001 Written and Oral Communication course, Imperial College Participant

Amirruddin A K

2000 CFD in Combustion Engineering, short course, CFD Centre, University of

Leeds

Participant

1997 A course on quality - 5S towards a quality environment by Federation of

Malaysian Manufacturers

Participant

Interests and Activities

Car Maintenance and keeping informed about the latest developments in automobile technology and reading

Personal Information

Malaysian Nationality, Born: March 20th, 1971, Married w/7 children, Height.1.62m, Excellent health, Non-smoker