bri823 sensors high/low bay daylight sensor
TRANSCRIPT
PROJECT NAME:_____________________________ CATALOG NUMBER:__________________________
NOTES:______________________________________FIXTURE SCHEDULE:_________________________
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Rev: 07/17/20
Page: 1 of 4
BRI823 SENSORSHIGH/LOW BAY DAYLIGHT SENSOR
FEATURES:• Provide Line voltage On/Off switching and 0-10VDC dimming control• Works with ballast or LED drivers• High and low modes fully adjustable from 0-10V• Time delay from 10 sec to 60 mins• Optional cut off delay• Adjustable ramp up and fade down times• IP65 rated - External Mount Model only. Integrated model needs to be installedinanIP-65ratedfixture,thePIRsensormodulepartsandlens are IP65 outdoor rated.
ORDER STRUCTURE
FAMILY INSTALLATION DISTRIBUTION FINISH
BRI823-= Daylight Sensor X-D= External Mount -L3-= High Bay Lens 8-40ft BRONZEBLACKWHITEB-D= ntegrated -L4-= Low Bay Lens 8-20ft
External Finish Look
Internal Finish Look
Contact Maxlite for additional finishes.
WARRANTY:5-year standard warranty (further details available at www.maxlite.com/warranties) Product may be eligible for a warranty extension to 10 years, for an additional fee. Contact MaxLite for details.
ACCESSORY (SOLD SEPARATELY)
ORDER CODE MODEL NUMBER DESCRIPTION IMAGE
104799 RMRC-100 REMOTE CONTROL
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Page: 2 of 4
BRI823 SENSORSHIGH/LOW BAY DAYLIGHT SENSOR
PLM608Rev: 07/17/20
WIRING DIAGRAM(EXTERNAL FINISH MODEL)
WIRING DIAGRAM(INTERNAL FINISH MODEL)Wiring with dimming ballast or LED driver Wiring with non-dimming ballast or LED driver
SPECIFICATIONS BRI823 SENSORS
DETAILS
Power Supply 120-277VAC
Maximum load Resistive/Halogen - 800W @ 120V/ 1200W @277V
Flurescent Ballast/CFL 660W @120V/ 1200W@277V Electronic Ballast (LED) - 5A @120V/5A @277V
Dim control output 0-10V,max.25mAsinkingcurrent
Detection radius /angle 30ft @ 40ft Height/360°
Mounting height Max 24ft. @ LW1 / Max 40ft. LS2
Remote Range 50ft(15m)indoor,nobacklight
Humidity Max. 95% RH
Temperature -40°F to 158°F (-40°C to 70°C)
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Page: 3 of 4
BRI823 SENSORSHIGH/LOW BAY DAYLIGHT SENSOR
PLM608Rev: 07/17/20
PRELIM
INARY
DIMENSIONS(EXTERNAL MODEL)
DIMENSIONS(INTERNAL MODEL)
L4
COVERAGEL3
Phone: 1-800-555-5629 | Fax: 973-244-7333 | Web: www.maxlite.com | E-mail: [email protected]
Page: 4 of 4
BRI823 SENSORSHIGH/LOW BAY DAYLIGHT SENSOR
PLM608Rev: 07/17/20
SMART PHOTOCELL FUNCTION
Difference between Corridor Function ans Smart Photocell Function
1. In corridor function, the daylight sensor as threshold to assist motion sensor, in Photocell function, the daylight sensor works independently to motion sensor.
2. Turn on light by detect motion when natural light is insufficient for corridor function, turn on light by natural light level exceeds setpoint on to light, do need to detect motion, for smart photocell function.
3. Turn off light by stand-by time for corridor function. Turn off light by natural light level lower than setpoint off of light for smart photocell function.
CORRIDOR FUNCTIONS