breville bkc600xl heating tank replacement guides/breville bkc600xl heatin… · breville bkc600xl...

6
Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written By: Antonio Breville BKC600XL Heating Tank Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Upload: others

Post on 01-Aug-2020

20 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

Breville BKC600XL Heating Tank ReplacementReplacing the heating tank should it fail to work.

Written By: Antonio

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 6

Page 2: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

INTRODUCTION

Replacing the heating tank should it fail to work.

TOOLS:Phillips #0 Screwdriver (1)

PARTS:Breville BKC600XL Heating Tank (1)

Tying Band (1)

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 6

Page 3: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

Step 1 — Bottom Cover #1

Use a Phillips #0 screwdriver to remove the following ten screws:

Four 18mm Phillips screws.

Four 9.75mm Phillips screws.

Two 8mm Phillips screws.

The cover will not remove entirely. Keep green ground wire attached to the cover.

Step 2 — Black Water Inlet

Remove the two 14.5 Phillips screws.

Ensure that only the water inlet valve can be moved.

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 6

Page 4: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

Step 3 — Bottom Cover #2

Use a Phillips #0 screwdriver to remove the following six screws:

Six 14.5mm Phillips screws.

Step 4 — Power Cord

Remove the power cord from the groove. (the black cord that leads into the green wire.)

This creates more slack in the wire to give you more room to work with.

DO NOT remove green wire from the cover its attached to.

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 6

Page 5: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

To reassemble your device, follow these instructions in reverse order.

Step 5 — Clear Hose

Identify the hose that connects to the heating tank. (Observe that it is held up on a small hook.)

Push down on the hook and carefully move the hose from its grip.

Step 6 — Heating Tank

Carefully pull out the heating tankby hand.

The heating tank may still be hot.Exercise caution when grabbinghold of the tank. If necessary,wait four to six hours after lastuse.

Reminder for reassembly; Youwill need a new band to tie thehose back to the heating tank.

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 6

Page 6: Breville BKC600XL Heating Tank Replacement Guides/Breville BKC600XL Heatin… · Breville BKC600XL Heating Tank Replacement Replacing the heating tank should it fail to work. Written

This document was last generated on 2017-08-07 08:44:06 PM.

Breville BKC600XL Heating Tank Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 6