brevard spring 2011 computer-based testing fcat/eoc full presentation with pearsonaccess slides
TRANSCRIPT
BREVARDSpring 2011
Computer-Based TestingFCAT/EOC
Full Presentation with PearsonAccess Slides
2
Two versions of this presentation areavailable online at the
Accountability, Testing and Evaluation Website
Version 1: Abbreviated for CBT Team TrainingVersion 2: Complete with steps for using PearsonAccess
Agenda
• Overview Housekeeping Reminders New
• The Big Picture: 5 Parts of administering CBT Planning Translate Planning into Scheduling in PearsonAccess Preparing for testing
General prep Training/ Test Administrator Responsibilities
During Testing After Testing
• Appendix A: Training Test Administrators• Appendix B: Technology Coordinator
3
4
Spring 2011 Computer-BasedTest Administration Schedule
Test Testing Window Duration
Mathematics Retake*April 6 – April 13, 2011
Untimed
Grade 10 MathematicsApril 13 – April 25, 2011
160 minutes
Geometry EOC Field Test
Biology EOC Field TestMay 2-6
90 minutes 75 minutes
Algebra 1 EOC May 9-13160 minutes + (Untimed1)
*Reading Retake and Gr. 10 Reading are NOT computer-based tests in Brevard.
*All RETAKE paper-based materials will be picked up on Thursday, April 14, 2011.
1 160 min. w/ 10 min. break after 80 min. No dismissals during first 80 min. After 10 min. break, students may be dismissed as they complete the test. Must
complete test in 1 day.
5
HOUSEKEEPING
• There are two separate correction sheets (page 27 and page 40) for the FCAT Spring 2011 Computer-Based Test Administration Manuals . (These sheets are included in the manual shipment.)
Distribute one corrected page 27 and one corrected
page 40 with each Spring 2011 Computer-Based Test Administration Manual.
FDOE recommends stapling or taping the replacement sheets over the current sheets. (The current pages should not be completely removed from the manuals because the replacements are not double-sided.)
Replace Pages in FCAT CBT Manual
6
Pearson Support and PearsonAccess• Contact Pearson Support
Phone Number: 1-877-847-3043
• Appendix C in the manual provides the following information: PearsonAccess
User Accounts– Everyone should have an account specific to their function.– Contact Midge Rondello if you need help.
Browser requirements Logging in for the first time Resetting passwords
Training Center Test Setup Exercise
Note: PearsonAccess will timeout after 14 minutes of inactivity.
HOUSEKEEPING
7
• PearsonAccess – www.pearsonaccess.com/fl • Brown Site: Training Center for Infrastructure Trial
and practice• Blue Site: Operational center for actual test preparation
(e.g., PreID, setup, administration, and reporting tasks) Correct test administration must be selected each
timeyou log in.
Requires a username and password.
Reminders for Spring 2011Computer-Based Testing
8
Practice Tests• Students are required to participate in a practice test at the
school using the script provided in the CBT test administration manual. Practice test is delivered using an ePAT (electronic practice assessment
test). ePAT is available for student to practice on their own. The ePAT practice tests, test scripts, and answers for FCAT
Math, Algebra 1, Biology 1, and Geometry are posted to www.FLAssessments.com/ePAT under the Practice Assessment Tools and the Resources tabs.
• Practice tests (ePATs) can be used at any time at home; schools must stop one week before the test.
• After participating in a practice test, students can request an FCAT hand-held calculator or a hard-copy of the reference sheet on the day of testing.
Reminders for Spring 2011Computer-Based Testing
9
Reminders for Spring 2011Computer-Based Testing
• Reference sheets are provided in the CBT platform as on online tool. Schools may provide hardcopy reference sheets to students. Hardcopy reference sheets must be single-page, double-sided
photocopies of the reference sheet that is in the Appendix of the CBT manual.
• Ratio of proctors to students required for computer-based testing is one proctor for every 25 students.
• Mathematics Work Folder is now called Florida Computer-Based Testing Work Folder.• WORK FOLDER = SCRAP PAPER
10
Reminders for Spring 2011Computer-Based Testing
>Call TA office
1111
Something New• A new user role, CBT Test Administrator, has been created in
PearsonAccess. School Assessment Coordinators may create accounts for test
administrators at each school testing site (computer lab, etc.) for the purpose of resuming computer-based tests during the testing window. Log in on the Blue Site Select a CBT test administration (it doesn’t matter which
one) Click on Administrative Management >View User
Accounts>New User Fill in the required demographic information, entering test
windows for start and end dates Click on CBT Test Administrator Click on your school and
NOTE: you will not be able to edit this info in PearsonAccess once it is entered. If you need to make any changes, contact Midge Rondello
www.pearsonaccess.com/fl >Administrative Management>View user accounts>new user
CBT Team
Responsibilities
The Big Picture
School Assessment Coordinator
Responsibilities
The Big Picture
1313
School CBT Team Responsibilities
1.Planning2.Translate planning into
scheduling in PearsonAccess
3.Prepare for Testing4.During Testing5.After Testing
1414
School CBT Team Responsibilities
1. Planning• WHO TESTS? Identify which students are
required to take which tests• WHAT TEST? Computer based test or a P/P
test?• WHERE to TEST? Identify your CBT and your
P/P test sites• WHEN to Test? Schedule days and times for
CBT and P/P• WHO ASSISTS? Identify staff as test
administrators/ proctors• HOW will students/test administrators know
where to go and when?
151515
School CBT Team Responsibilities
2. Translate Planning into Scheduling in Pearson• Manage student information in Pearson• Create test sessions• View and verify student data• Add and delete students• Manage Tests• Manage Test Sessions• Print authorization tickets
Pearson Scheduling
FCAT Open Feb. 21EOC opens April 9
16161616
School CBT Team Responsibilities
3. Prepare for Testing• Make sure all students have done ePAT• Assign test group codes to each session• Plan for distribution and collection of P/P tests• Plan for distribution and collection of auth.
tickets• Plan for distribution and collection of calculators
and reference sheets (go in DC box)• Train test/site administrators, proctors, back-ups• Get everyone involved to sign security
agreements• Set up Pearson usernames for test
administrators so they can resume testing when necessary
• Set up workstations, download, install, launch, etc.
1717171717
School CBT Team Responsibilities
4. During Testing• Distribute and collect materials for P/P
testing• Distribute and collect session rosters &
authorization tickets to/from test administrators
• Ensure each site has calculators & reference sheets
• Start and stop test sessions• Monitor session status and student progress• Supervise test administration and maintain
security• Manage make-up sessions and move
students• Start proctor caching software daily, assist
with technical issues
1818181818
School CBT Team Responsibilities
5. After Testing
• Prep P/P materials for return• In PearsonAccess
• Update student information• Mark student tests as “complete”• Stop test sessions• Invalidate tests• Record accommodations• Purge test content• Complete comment form
School CBT Team Responsibilities
1- PLANNING
2020
• FCAT Gr. 10 Math and Reading• First-time gr. 10 students who entered gr. 9 in Fall 2009
• FCAT Reading and Math Retakes• Retained gr. 10 students and all gr. 11-AD students
• Alg 1 EOC• All students enrolled in Alg 1 or equivalent course in 2010-
11 (or any part of an eligible course)• ??? PLAN for all students currently in gr. 7, 8, 9 who
previously took Alg. 1 and pray we don’t have to test them• Geom/Biol EOC field tests (no students who need P/P tests)
• All students currently enrolled in Geom or equiv. course • All students currently enrolled in Biol/Int 3 or equiv. course• NOT students who completed courses at the end of 1st
semester
Planning: Who Tests?
212121
• FCAT CBT Math Retakes: April 6-13• FCAT P/P Reading Retakes: April 11-13
• Pick up all P/P Retake materials 4/14/11
• FCAT Gr. 10 Reading: • Group testing for all 4/11/11• Small groups and make-ups 4/12-4/25
• FCAT Gr. 10 CBT: May begin 4/13/11 and test thru 4/25/11
• Geom/Biol EOC field tests: May 2-6
• Alg 1 EOC: May 9-13 (160 min. w/ 10 min. break after 80 min. No dismissals during first 80 min. After 10 min. break, students may be dismissed as they complete the test. Must complete test in 1 day)
??? Idea to test small group on day one as OTJ training
Planning: When Do we Test?
School CBT Team Responsibilities
2 - SCHEDULING
2323
• Scheduling in Pearson dependent on download of PreID files into PearsonAccess
• Scheduling for FCAT (Retakes and Gr. 10) open as of Feb. 21
• Scheduling for EOCs will open April 9
Scheduling in Pearson
24
School CBT Team PearsonAccess – Before Testing
Pearson Access instructional slides included in full version
ALSO
Please see Steve and Melinda’s screen shot handout
25
School CBT Team PearsonAccess – Before Testing
Filters and Search Fields in PearsonAccess• Any column with can be filtered.
To filter data, click the symbol and enter the filter criteria.
• The column will be filtered according to the search term.
• Clicking on the column heading also allows you to sort the data in descending or ascending order. Once the data is sorted, an up or down arrow appears after the column heading.
26
School CBT Team PearsonAccess – Before Testing
• Manage Student Information PreID upload during the designated PreID window Districts or school users may add information using
the Create New Student wizard after the designated PreID window
• Access Session Roster Test sessions must be created in PearsonAccess Students must be assigned to a test session
Test sessions can be modified at any time
• Verify the accuracy of Student Name and Student ID number prior to testing using the Session Roster
27
School CBT Team PearsonAccess – Before Testing
Create Test Sessions (FCAT-Open EOC Open 4/9)• Three ways of organizing test sessions
1. By Test Group – only includes students in a particular group (e.g., class, testing room) who will be testing togetherAdvantage: PearsonAccess can be used to manage the testing groups and session rosters will include only one group of students testing togetherDisadvantage: will require setup and management of more sessions
2. By Test Day – includes all students in a school to be tested in a subject on a particular dayAdvantage: greater security because a session can be started and stopped on the same dayDisadvantage: it requires coordination of testing groups at the school
28
School CBT Team PearsonAccess – Before Testing
Create Test Sessions (continued)
3. By Test Administration – includes all students scheduled to be tested in a subject during the entire test administrationAdvantage: limits setup and management to one session and additional make-up sessions do not need to be createdDisadvantage: test sessions are open and active during the entire testing window, which may present a security concern; greater coordination of testing groups at schools; and may be cumbersome to locate and manage specific students
29
School CBT Team PearsonAccess – Before Testing
Create a New Test Session (FCAT-Open EOC Open 4/9)
1. Log in to PearsonAccess, select 2011 Writing, R/M/S, and Retake administration.
2. Go to Test Management>Manage Test Sessions.3. Click New Session to go to the New Test
Sessions screen.
30
School Assessment CoordinatorPearsonAccess – Before TestingCreate a New Test Session (continued)
4. Enter the session details: Session Name School Test to be Administered Read Aloud – select No Default Form Group Type will usually be set to Main, except for when
computer-based accommodated test forms (e.g., large print, color contrast, zoom, screen reader) are used
Scheduled Start Date used for planning purposes – a test session will not start until you click START on the Session Details screen
5. Add students to test sessions by: Class (View By: Classes) Individual Student (View By: Students)
6. Select the check box for each class or student to be added to a session
7. Click Save8. Return to the newly created test session or to the Manage Test
Sessions screen9. Maintain a list of all test sessions
Ensure technology coordinator cached test content for all sessions and proctor caching is running for sessions prior to the first day of testing
31
School Assessment CoordinatorScenario/Action Required
Scenario Action Required
If Student Name or Student ID Number is incorrect…
Delete the student (pg. 53) from PearsonAccess, and then add the student (pg. 53) with correct information.
If student information other than Student Name or Student ID Number is incorrect…
Contact your district/school student database manager after testing is complete. You are not required to update PearsonAccess with this information.
If student was not included in PreID upload…
Add the student to PearsonAccess (pg. 53).
If the student is new to the school and/or the district…
Add the student to PearsonAccess (pg. 53).
If the student transfers from another district and/or school…
Add the student to PearsonAccess (pg. 53). Do not attempt to change the student’s enrollment in PearsonAccess.
If a new test assignment needs to be added or changed for a student…
Follow the instructions in To change the tests assigned to a student (pg. 60).
If the test format (online or paper) is incorrect for a student…
Follow the instructions in To change the test assignment details for a student (pg. 60).
If the student does not participate in this administration…
No further action is needed. If the student was scheduled for a test session, remove the student from the session (pg. 58).
32
School Assessment CoordinatorPearsonAccess – Before Testing
View and Verify Student Data• Student Name and Student ID Number MUST be
correct in PearsonAccess.• Confirm all students are in test sessions.
1. Go to Test Management>Manage Test Sessions2. Select “View By: Students”3. Select the Show All Students box and click Search
33
School Assessment CoordinatorPearsonAccess – Before Testing
• Confirm all students are in test sessions (continued)
4. Review the Session Name column for any empty/blank fields. Click twice on this column heading to sort descending by
name. Students who have not been placed in a session will have
an empty/blank field in this column.
5. Add students with blank fields to test sessions.
34
School Assessment CoordinatorPearsonAccess – Before Testing
• View and verify student data1. Go to Test Management>Manage Test Sessions.2. Click Session Name.3. Click the Session Roster button.
PDF of the roster can be printed and viewed. Roster displays all students (including Student Name and
Student ID) that have been assigned to a session.4. Verify Student Name and Student ID for all students in the
session. Note any incorrect information.
5. Repeat these steps for all remaining sessions until all student information is verified.
35
School Assessment CoordinatorPearsonAccess – Before Testing
Delete a Student• If a Student Name and Student ID Number is INCORRECT, delete
the student’s test assignment and create a new record in PearsonAccess.
• Delete a student’s test assignment1. Go to Test Management>Manage Test Sessions.2. Select “View By: Registered Students” on the Student Registration
screen. To view all students, select the Show All Students check box and
click Search. To search for an individual student, enter the search criteria, and then
click Search. Must enter or select at least one search field The more specific the criteria, the more focused the search will be
3. Click the name of the student, and then click the Assigned Tests tab.4. Select all Online tests assigned to that student and then click
Remove Test. Do not remove any paper tests assigned to the student.
5. Click Yes – Continue with Removal to confirm.
36
School Assessment CoordinatorPearsonAccess – Before Testing
Add a Student (FCAT-Open EOC Open 4/9)• For students not already identified in the PreID process or
with an incorrect Student Name or Student ID Number, remove the test assignment, and then create a new profile in the system using the Create New Student wizard. During the PreID window, students should not be added
using the Create New Student wizard
• Note: If an error in a student’s name occurs after the first 11 characters of the first name or after the first 12 characters of the last name, PearsonAccess will not allow you to create a new student profile for that student. Update those fields after testing is complete.
37
School Assessment CoordinatorPearsonAccess – Before Testing
Add a Student (continued)
• To successfully create a new student, complete the five-part registration process. If all five parts are not completed, the student will not be created.
• Part 1 – Add a new Student1. Go to Student Data>Student Data Information.2. Click New Student.
38
School Assessment CoordinatorPearsonAccess – Before Testing
Add a Student (continued)
• Part 2 – Edit Student Details1. Enter test data for all required fields - Florida Student ID
Number (FSID), Student Last Name, and Student First Name. Student Name must be entered in all CAPS. FSID can be a 10-digit Florida Student ID Number (e.g.,
1234567891) or the 9-digit Social Security Number followed by an X (e.g., 123456789X).
2. Scroll down and select the Enrolled School.3. Click Save and Next to save your entered data.
39
School Assessment CoordinatorPearsonAccess – Before Testing
Add a Student: Part 2 – Edit Student Details (continued)
• Note: If a student is created for this administration with the same Florida Student ID Number (or Social Security Number followed by an X), the same first 11 characters of the first name, and the same first 12 characters of the last name as an existing student profile at this school, the duplicate student error message will appear. Click Back to Student Entry Form and cancel the process. Existing student profile must be used unless there is an error in the
Student Name or Student ID Number. See the instructions to Update Student Information on pages 68-69 of
the manual.
40
School Assessment CoordinatorPearsonAccess – Before TestingAdd a Student (continued)• Part 3 – Edit Test Registration Details
1. Select the appropriate Test Administration.2. Enter the student’s Date of Birth.3. To record ethnicity, use the drop-down box to select Yes or No.4. To record race, use the drop-down boxes to select Yes or No
next to each race category. Yes may be selected for more than one race category.
5. Select the appropriate Gender and Grade.6. Click Save and Next.
41
School CBT Team PearsonAccess – Before TestingAdd a Student (continued)• Part 4 – Edit Class Registration
1. To assign the student to an existing class, select the box next to the class name and click Save and Next.
2. To assign the student to a new class, click New Class and follow the steps to create a new class. Class name has a limit of 9 characters and must be in all CAPS
(e.g., THOMAS). When the class has been created and added to the list, select the
box next to the class name and click Save and Next.
42
School CBT Team PearsonAccess – Before TestingAdd a Student (continued)• Part 5 – Edit Assigned Tests and Enable the Student to Test on
Computer (Set Online Indicator)1. Student must be assigned to a test. Select the box(es) next to the
appropriate test(s).2. Set the student’s Tested Grade and Online Indicator for each test.
Tested Grade is the grade level of the student to be tested. Online Indicator indicates that the student will participate in
the computer-based administration. Yes must be selected for a student to be scheduled into a test session.
3. Click Save and Exit to complete the registration process for this student.
43
School CBT Team PearsonAccess – Before TestingManage Test Sessions
TASK DESCRIPTIONFCAT/EOC MANUAL PAGE(S)
View an Existing Test SessionCheck the session details and verify that students are assigned to the correct session.
57/81-82
Add, Move, or Remove Students
Students actually testing in this session may have changed since the session was created.
57-58/82-83
Manage Class Information (optional)
Classes can be used to manage students in PearsonAccess.
58-60/83-85
Manage Other Student Information
Some student data may be changed in PearsonAccess.
60-61/85-86
Technology Coordinator Proctor Cache test items
Proctor Caching is required for efficient test delivery. Provide technology coordinator with a list of all test sessions for school.
76-102/102-
128
Print Student Authorization Tickets and Session Rosters
Each student needs a Student Authorization Ticket in order to log in to the test session, and each test administrator needs a Session Roster.
61-62/87-88
Distribute Student Authorization Tickets and Session Rosters to test administrators
Student Authorization Tickets and Session Rosters are secure and should only be distributed on the day the assessment will be administered.
61-62/87-88
44
School CBT Team PearsonAccess – Before Testing
View an Existing Test Session1. Go to Test Management>Manage Test Sessions.
2. Under Session name, click the name of the session you want to verify.
3. Review and verify the students to be tested in the session. Session Roster can also be used to verify the list of students. If students are missing, see Add Students to Test
Sessions. If students are in the incorrect session, see Move
Students to Another Session. If students will not be testing or if they were absent
for/during the entire testing window, see Remove Students from Test Sessions.
45
School CBT Team PearsonAccess – Before Testing
Add Students to Test Sessions1. Go to Test Management>Manage Test Sessions.
2. Select “View By: Test Sessions.”
3. Click on the Session Name to go to the Session Details screen.
4. Click Add Students.
5. Select “View By: Classes” or “View By: Students.”
6. Select the check box for the class or the student you want to add, and then click Add to Session. After you add students, you can verify Form/Form
Group Type by clicking Edit.
7. Click Save after you make changes.
46
School CBT Team PearsonAccess – Before Testing
Move Students to Another Session1. Go to Test Management>Manage Test Sessions2. Select “View By: Test Sessions”3. Click on the Session Name to go to the Session Details screen4. Select the check box for each student to be moved
Only students with a Ready, Exited, Resumed, or Resumed-Upload status may be moved
Students with a Submitted, Processing, Completed, or Marked Complete status may not be moved to another session
5. Click Move to go to the Move Students screen6. Select an existing test session or create a new test session to which
the students will be moved
47
School CBT Team PearsonAccess – Before Testing
Remove Students from a Session1. Go to Test Management>Manage Test Sessions.2. Select “View By: Test Sessions.”3. Click on the Session Name from which you want to
remove a student. On the Session Details screen, check the box for each
student you want to remove. Click the Remove button. Click Yes – Remove Students to confirm this action.
48
School CBT Team PearsonAccess – Before Testing
Manage Class Information1. Class is a required field in PearsonAccess – students are
assigned to a class either through PreID upload OR Create New Student wizard. PreID upload
Class name was provided by the districts.OR
Students were automatically added under generic class names, depending on the student’s test assignment (e.g., M10-Class, MRT-Class, or RRT-Class).
Prefixes: Mathematics Grade 10 = M10 Mathematics Retake = MRT Reading Retake = RRT
Create New Student wizard Coordinator must enter class assignment for students, but
there are no prefixes automatically added to these class names.
49
School CBT Team PearsonAccess – Before Testing
Manage Class Information (continued)
2. School assessment coordinators may use class assignments to organize student information OR manage students in PearsonAccess (e.g., to indicate groups of students test together). However, school assessment coordinators may not want the additional tasks associated with managing and changing student class assignments.
May disregard the class assignment and manage students tested together through test session assignments or some other means.
50
School CBT Team PearsonAccess – Before TestingAdd a New Class1. Go to Test Management>Student Registration.2. Select “View By: Classes,” click Add Class.3. Enter the class name – limit 9 characters and must be all CAPS (e.g.,
THOMAS).4. Select your school name from the drop-down menu (required field).5. Click Save to add the class.Add Students to a Class1. Go to Test Management>Student Registration.2. Select “View By: Classes”, click the name of the class to view Class
Details.3. Click Add Students.4. Check the box next to each student to be added to the class. Click
Save and then click Yes –Continue with Add to confirm.
51
School CBT Team PearsonAccess – Before Testing
Assign Students in a Class to a Test(only if a student has not been assigned to a test)
1. Go to Test Management>Student Registration.
2. Select “View By: Classes,” click the name of the class to view Class Details.
3. Click Add Students.
4. Check the box next to the student name(s) to be assigned to a test and select Assign Students to Test.
5. From the Test drop-down box, select the name of the type of test the student will take and click Next.
6. Select Yes for the Online Indicator. Select a grade for the Tested Grade, then click Save.
52
School CBT Team PearsonAccess – Before Testing
Change a Student’s Assigned Class1. Go to Test Management>Student Registration.2. Select “View By: Registered Students.”
To view all students, check the “Show All Students” box and then click Search.
To search for an individual student, enter search criteria and click Search.
3. Click the name of the student to go to the Registered Students screen.
4. Click the Assigned Classes tab. To add class assignment, click Add Class Assignment, select
the class, and then click Add. To remove class assignment, select the class, and then click
Remove Class Assignment. Click Yes – Continue with Removal to confirm.
If a student has already been assigned to a class and a test, you must remove the test assignment before you can remove the class assignment.
53
School CBT Team PearsonAccess – Before Testing
Change the Tests Assigned to a Student(e.g., a student is assigned to the wrong test)
1. Go to Test Management>Student Registration2. Select “View By: Registered Students.” 3. Click the name of the student to go to the Registered
Students screen.4. Click the Assigned Tests tab.
Add test assignment, click Add Test, and select the test. Select Yes for the Online Indicator and select a grade for
the Tested Grade. Select any optional indicators or accommodations, if
needed. Click Save.
Remove test assignment, select the test, and then click Remove Test.
54
School CBT Team PearsonAccess – Before Testing
Change the Tests Assignment Details for a Student(e.g., changing from online to paper, recording accommodations)• Note: Changing an online test format to a paper test format will not cause a new PreID
label to be created. You will need to order paper test materials and grid the student grid sheet. Allows for a student to be removed from the pre-existing list of available students for online testing when creating a new session or when verifying the Session Roster.
• The following fields will be available for editing before and after online testing. ONLY enter the accommodations that are actually used. Online Indicator (only editable before testing) Class Name All ESE/504 and ELL accommodation types ELL Section 504 Primary Exceptionality Braille Large Print One-Item-Per-Page Reading Passage Booklet Regular Print Accommodations
55
School CBT Team PearsonAccess – Before Testing
Change the Tests Assignment Details for a Student(e.g., changing from online to paper, recording
accommodations)
1. Go to Test Management>Student Registration.
2. Select “View By: Registered Students.”
3. Click the name of the student to go to the Registered Students screen.
4. Click the Assigned Tests tab.
5. Click the name of an assigned test to go to the Registered Student Test Details screen.
6. Click Edit and make the changes to the allowable fields.
7. Click Save.
56
School CBT Team PearsonAccess – Before Testing
Schedule a New Session for Make-Ups1. Go to Test Management>Manage Test Sessions.
2. Click New Session.
3. Fill in the required fields to create a new test session for students testing during a make-up session.
4. Once session is created, move students to this test session.
5. Provide the technology coordinator with information about this session so he/she can complete the Proctor Caching process prior to testing.
Note: Testing window allows for multiple test sessions to be scheduled throughout the week. It is also possible to reassign absent students to existing session scheduled later in the week, rather than creating make-up sessions.
57
School CBT Team PearsonAccess – Before Testing
Student Authorization Tickets and Session Rosters are SECURE materials.
Print Student Authorization Tickets
1. Go to Test Management>Manage Test Sessions.2. Click the session name for which you wish to print authorization tickets.3. From the authorization drop-down menu, select Student
Authorizations. Authorization Tickets can be downloaded in three different formats:
Detail View (one ticket per page) List View (three tickets per page) Grid View (six tickets per page)
Print Session Roster
1. Go to Test Management>Manage Test Sessions.2. Click the session name for which you wish to print Session Roster.3. Click Session Roster.4. Click Save, save the file to your computer, and then click Open (a PDF
file containing the Session Roster will open).5. Print the Session Roster.
58
Materials Needed for Testing
• Session Roster can be used to record or verify most of the required administration information.
School CBT Team Responsibilities
3 - Preparing for Testing General Preparation
Training Test Administrators Tech Coordinator Role
60
School CBT Team Checklist – Before Testing
Read the test administration manual. Read the Test Administration Policies and Procedures and
sign the FCAT CBT Administration and Security Agreement. Train Test Administrators and Proctors and ensure that
they, as well as all school administrators, sign the FCAT CBT Administration and Security Agreement.
Receive test materials from district assessment coordinator; inventory materials within 24 hours of receipt, and report missing materials or request additional materials.
If your school will provide paper reference sheets (Mathematics tests only), ensure an adequate supply is available for all students.
Communicate the process for collecting required administration information to test administrators.
Distribute test group codes to test administrators.
61
School CBT Team Checklist – Before Testing Make arrangements to test any special program students
(district virtual instruction programs, Home Education Program, etc.) who may be testing at your school.
Assign proctors, as needed. Ensure that appropriate test settings are available for all
test sessions. For students who require special accommodations at your
school, discuss with test administrators how accommodations will be provided.
Verify student information and create test sessions in PearsonAccess.
Distribute Session Rosters and Student Authorization Tickets on the day of testing.
Complete any Computer-Based Assessments Certification district readiness activities as directed by FDOE.
62
Test Group Code Test CodeA unique four-digit number used to identify groups of students tested together which is created by district assessment coordinators or by school assessment coordinators. This is entered after the Welcome screen in TestNav (or TestHear) and before students see the first question.
A six-digit code created by PearsonAccess and printed on Student Authorization Tickets and Session Rosters. The Login ID and the test code are required to log in to TestNav (or TestHear).
Test Code & Test Group Code
63
Practice Test (ePAT)
• All students MUST participate in a practice test (approximately 45 minutes) prior to taking any computer-based test. Recommend completing at least three weeks prior to
administration. Provide students with URL so they can practice on their own
www.FLAssessments.com/ePAT.
• About the ePAT Familiarizes students with
Mathematics Reference Sheets Online tools Process of responding to items on the computer
Practice test items are not intended to replicate the difficulty of the items on the test.
Work Folders and Reading Passage Booklets will not be provided for practice tests. Instruct students to bring their own scratch paper and
pencils/pens.
64
Conduct Practice Test (ePAT)
• ALL students MUST complete a practice test to learn how to use the computer-based system. Even students who participated in a Spring 2010
computer-based test MUST complete a practice test prior to the Spring 2011 administration.
• Ensure that the following items have been downloaded to each computer that will be used for the practice test ePAT Launcher FCAT Reading and Mathematics Retake Practice Test
Each appropriate EOC Practice Test
• Scripts provided in manual and in Pearson>ePAT>Resources .
65
School CBT Team Training – Before Testing
Train Test Administrators and Proctors• Monitoring test sessions and resuming students in
PearsonAccess School coordinators have the ability to resume students and may
require test administrators to contact them during testing to request this authorization.
Test administrators may resume students if PearsonAccess accounts have been created by the district.
• Securing a student’s computer if a student leaves the room and will resume testingRecommended Long breaks: student must exit the TestNav system by clicking the
X or the red circle in the top corner and then clicking Yes, exit the test Student will not be able to continue testing until he/she is authorized to
resume testing in PearsonAccess. Short breaks: visual block (e.g., a file folder) must be applied to
obscure the computer screen or turn off the monitor
66
School CBT Team Training – Before Testing
• Test administrators must contact the school assessment coordinator if the following occurs: A student exits the test to finish later and logs out
of the test session. A student has trouble logging in the first time. A student has not participated in a practice test. A test administrator does not have a Student
Authorization Ticket. A student’s name is not correct (e.g., misspelled)
on the Student Authorization Ticket. A test administrator is concerned that a student is
unable (e.g., too ill) to finish the test.
67
• Required Administration Information for each Test Administrator’s room: Students assigned to each test site
Student Name and Student ID Number Attendance Information
P=Present, A=Absent, W=Withdrawn, P/I=Present but Invalidated Accommodations provided
Codes are in the Spring 2011 Computer-Based Test Accommodations Guide for Grade 10 Mathematics and Reading & Mathematics Retakes
Test Group Code (to identify groups of students tested together) Grade Level Signatures of test administrator and school assessment
coordinator and dates for when secure materials (e.g., Work Folders, Student Authorization Tickets, Session Rosters, Reading Passage Booklets, Mathematics Reference Sheets) are received and returned
Materials Needed for Testing
68
Materials Needed for Testing
• Test Group Codes Unique four-digit number Identifies a group of students tested together
• Florida Computer-Based Testing Work Folders (if needed) A blank piece of yellow 11x17 paper folded in half
that students use to work Mathematics problems
• Reading Passage Booklets (Accommodation) Students are eligible if their IEPs or Section 504
plans include this accommodation Booklets contain Reading passages but do not
contain test items Students will respond to test items on the computer
69
Materials Needed for Testing
• Calculators Computer-based FCAT Math tests have a
built-in, 4-function calculator (TI-108). Students may request a hand-held FCAT
calculator instead of the online TI-108 after participating in a CBT practice test.
Geom EOC includes online scientific calculator.
• Reference Sheets/Periodic Table Computer-based tests have a pop-up
window that includes the Math Reference Sheet s and a Biology periodic table.
Schools may provide paper copies of reference sheets to students; however, schools must make their own copies.
70
Materials Needed for Testing
• Student Authorization Tickets (secure materials) Session/Test/Location Student Name Date of Birth Student ID Student Signature Line URL Login ID Test Code (password)
• Students need a Login ID and Test Code (password) for each test session.
• Students need a pencil or pen to sign their tickets.
71
Samples (3 types) Of Printed Student Authorization Tickets
Detail View/Single TicketDetail View/Single Ticket
List View/3 TicketsList View/3 Tickets
Grid View/6 TicketsGrid View/6 Tickets
72
School CBT Team Training – Before Testing
Train Test Administrators and Proctors
• For Test Administrator training slides, see
Appendix ATest Administrator
Training and Responsibilities
7373
School CBT TeamPreparing for Testing
• For Technology Coordinator Role, see
Appendix BTechnology Coordinator
Before, During, and After Testing
School School Assessment Coordinator/CBT Team
Responsibilities
4 - During Testing
75
School Assessment CoordinatorChecklist – During Testing
Ensure that test sessions have been started in PearsonAccess.
Provide test administrators with additional materials, as necessary.
MonitorMonitor each testing room to ensure that test administration and test security policies and procedures are followed.
Security Logs are being properly completed and required administration information is being collected.
Be available during testing to answer questions from test administrators.
In PearsonAccess, monitor session status and resume students’ tests, if necessary.
Arrange for and supervise make-up administrations.
76
School Assessment CoordinatorDuring Testing
• Maintain/ensure test security• Supervise test administration• Gather info needed for make-up testing
• In Pearson- Start test sessions Monitor session details Resume students’ tests Monitor student progress
77
Security Log
• Schools are required to maintain an accurate Security Log for each testing room.
• Anyone who enters a room for the purpose of monitoring a test MUST sign the log for that testing room, regardless of how much time he/she spends monitoring a testing room.
• A perforated Security Log can be found in Appendix D of the manual.
• Blank Security Log can also be found at www.FLAssessments.com/SpringRMS.
78
Sample of Security Log
79
School Assessment CoordinatorDuring Testing
Supervise Test Administration/Maintain Test Security• School Assessment Coordinator and Technology Coordinator must be
available to answer questions and assist with computer problems/error messages.• How will you communicate?
• Provide test administrators with additional Work Folders, reference sheets, and calculators, if necessary.
• Ensure that Security Logs and required administration information are being maintained.
80
School Assessment CoordinatorDuring Testing
Supervise Test Administration• If the Internet connection is interrupted during testing:
Student will still be able to complete the test. Student responses are automatically saved and, once
Internet connection has been restored, will be sent to Pearson.
IF the Internet connection is not restored by the time the student has finished the test, the test administrator should contact the school assessment coordinator or technology coordinator for assistance.
If there are issues on a specific computer Shut down the first computer and move student to another
computer that has been properly set up for testing. Student should be able to resume testing where he/she
left off if the responses were saved to the network. If a student cannot continue testing, document the
issue and determine whether invalidation is appropriate.
81
School Assessment CoordinatorPearsonAccess – During Testing
Test Session Management Tasks During Testing
TASK DESCRIPTION
FCAT/ EOC
MANUAL
PAGE(S)
Start test sessionsA session must be started in PearsonAccess before students can begin the test.
63-64/ 89-90
Monitor session details
Keep track of each student’s testing status in PearsonAccess.
64/90
Resume students’ tests
If a student exits the test (intentionally or unintentionally) before completing a test and will resume the same test.
64-65/90-92
82
School Assessment CoordinatorPearsonAccess – During Testing
Start Test Sessions (continued)
3. After a session is started, students can log in and begin testing. A session does not stop until you click the Stop button,
regardless of the value in the Estimated Duration field. The system will not automatically start or stop a session.
4. Monitor the status of each student in a session. Click Refresh button next to Status to update the real-
time testing status of students.
83
School Assessment CoordinatorPearsonAccess – During Testing
Monitor Session Status
Ready The student has not started the test.
Active The student has logged in and started the test.
Exited
The student has exited the test but has not submitted his/her answers. (The student cannot resume the test unless authorized by the school assessment coordinator or the test administrator, if applicable.)
Resumed The student has been authorized to resume the test.
Resumed-UploadThe student has been authorized to resume the test and any responses saved locally have been uploaded.
Submitted The student has finished testing and submitted his/her answers.
ProcessingThe student’s test has been submitted and the system has begun processing the data.
Completed The student’s submitted test data have been processed.
Marked CompleteThe student has exited the test and will not resume the same test. Click the Marked Complete icon to view the reason why the test was marked complete.
84
School Assessment CoordinatorPearsonAccess – During Testing
Resume Students’ Tests• Student exits TestNav (either unintentionally or intentionally) before
completing a test.• School Coordinator or Test Administrator must resume the test
before student can continue.1. On Session Details screen, click the check box next to the name of the
student. Student cannot be resumed if he/she has a Ready, Submitted, or Marked
Complete status.2. Click Resume Test (resumes the student’s test from the point at which
the test was interrupted). System will upload any test responses that the student entered and that were
saved. Once the connection to the testing server is reestablished and the student is
in Resumed-Upload status, the saved responses are transmitted to the testing server and added to the responses already stored there.
85
School Assessment CoordinatorPearsonAccess – During Testing
Resume Students’ Tests (continued)
3. After clicking Resume Test, student’s status changes to Resumed (if the student was in Exited status) or Resumed-Upload (if the student was in Active status) on the Session Details screen.
4. Resumed student can now log in to TestNav and resume the test. Status changes back to Active.
5. Double-click the TestNav icon and type the URL printed on the authorization ticket. Student can log in using the same Login ID and test code
(password) from the original authorization ticket if the student is in the same test session.
86
School Assessment CoordinatorPearsonAccess – During Testing
Resume a Test Within TestNav’s Early Warning System (EWS)• Certain circumstances, such as loss of an Internet
connection, trigger the EWS. • One of the following error messages may appear on a
student’s computer during testing.
87
School Assessment CoordinatorPearsonAccess – During Testing
Resume a Test Within TestNav’s EWS (continued)
1. Click the Test Proctor – Click Here button on the EWS warning screen and follow the on-screen directions.
2. Return to the Session Details screen and click Resume Test. If a saved response file for the student is found, it will be
uploaded to the testing server when the connection is reestablished and the student logs back in to TestNav.
If a saved response file is not found, TestNav will prompt the user to navigate to the location where the response file is saved so it can be uploaded.
3. The student can now log in to TestNav and restart the test. Student status will return to Started after successfully re-
entering the test. Whenever possible, have the student log in to TestNav from
the original workstation so that the student’s saved response file can be transmitted to the testing server if it was saved on the local student workstation.
88
School Assessment CoordinatorPearsonAccess – During Testing
Monitor Student Progress• Start test sessions in PearsonAccess.• Monitor testing rooms.• Resume tests, as needed.
Test Administrators may resume tests if they have been provided appropriate PearsonAccess accounts.
School Assessment Coordinator/CBT Team
Responsibilities
5 - After Testing
90
School Assessment CoordinatorChecklist – After Testing
Verify that all distributed secure materials have been returned. Report any missing materials to your district assessment coordinator and conduct the necessary investigation.
Make copies of all collected required administration information and Security Logs and file the copies.
In PearsonAccess, stop test sessions and invalidate student tests, if necessary.
In PearsonAccess, record accommodations actually used by students.
Organize materials and return them to your district assessment coordinator.
Complete the CBT School Assessment Coordinator Comment Form.
91
School Assessment CoordinatorChecklist – After Testing
• Report to district assessment coordinator
• missing materials (particularly secure documents such as student authorization tickets),
• test irregularities,
• security breaches
• In Pearson
• Update/edit student information
• Mark students’ tests complete
• Stop test sessions
• Invalidate tests and cite reason for invalidation
• Record accommodations
• Transcribe each P/P Alg 1 EOC test into a CBT test
• Complete Comment Form
92
Missing Materials and Test Irregularities/Security Breaches
Test administrators should report any test irregularities (e.g., power outage, fire alarm) and possible security breaches to the school assessment coordinator immediately.
• If a secure document, such as a Student Authorization Ticket, a used Work Folder, a Session Roster, or a Reading Passage Booklet, is lost or a test irregularity or security breach is identified, the school assessment coordinator must contact the district assessment coordinator.
• Missing Materials form and Test Irregularities/Security Breaches form will be sent from the District Testing Office.
93
Test Invalidation Policies and Procedures
• Purpose of test invalidation is to identify when the validity of test results has been compromised.
• Test administrators should discuss situations involving possible invalidation with the school assessment coordinator and the situation should be investigated immediately.
• A test MUST be invalidated if any of the following circumstances occur: A student has an electronic device during testing. A student is cheating during testing. A student is disruptive during testing.
Situations involving possession of electronic devices, possible cheating, or disruptive behavior should be investigated and discussed with the school assessment coordinator and site administrator before a final invalidation decision is made.
94
Test Invalidation Policies and Procedures
A test MAY be invalidated if any of the following circumstances occur:
1. A student becomes ill and is unable to finish, OR a student is not allowed the correct amount of time.
2. A student was given an accommodation not allowed on the FCAT.
3. A student was given an accommodation not on the student’s IEP, Section 504 plan, or ELL plan.
4. A student was not provided an allowable accommodation listed on the student’s IEP, Section 504 plan, or ELL plan.
5. An error occurs in test administration or procedures that could compromise the validity of the test results (e.g., students had access to an unauthorized visual aid that gave an unfair advantage).
95
School Assessment CoordinatorPearsonAccess – After Testing
Test Session Management Tasks After Testing
TASK DESCRIPTION
FCAT/ EOC
MANUAL
PAGE(S)
Mark a student’s test complete
Mark a student’s test complete if a student exits the test and will not resume the same test.
70-71/ 96-97
Stop test sessionsA test session cannot be stopped until all students are in “Completed” or “Marked Complete” status.
71/97
Invalidate testsAny tests that should not be scored must be invalidated.
71/ 97-98
Record accommodations
All accommodations used by students must be recorded in PearsonAccess.
71/98
96
School Assessment CoordinatorPearsonAccess – After Testing
Update Student Information• When a students’ status in PearsonAccess is “Completed”
Certain demographic fields can be edited for Computer-based Retake (Reading or Mathematics) students
until April 15, 2011. Computer-based Grade 10 Mathematics students until
April 29, 2011. EOC by Friday of the week the test was taken.
Following fields will be available for editing after testing: Tested Grade Tested Last Name Tested First Name Tested Middle Initial Tested Date of Birth Tested Gender Tested Ethnicity All Tested Race Categories Do Not Score Do Not Score Reason
Class Name All ESE/504 and ELL
accommodation types ELL Section 504 Primary Exceptionality Braille Large Print One-Item-Per-Page Reading Passage Booklet Regular Print Accommodations
97
School Assessment CoordinatorPearsonAccess – After Testing
Edit Student Information After Testing 1. Go to Test Management>Student Registration.2. Select “View By: Registered Students.”
View all students, check the “Show All Students” box and then click Search.
Search for an individual student, enter the search criteria and then click Search. You must enter or select at least one search field; the more
specific the criteria, the more focused the search will be.3. Click the name of the student to go to the Registered
Students screen.4. Click the Assigned Tests tab.5. Click the name of an assigned test to go to the Registered
Student Test Details screen.6. Click Edit and make the changes to the allowable fields.7. Click Save.
98
School Assessment CoordinatorPearsonAccess – After Testing
Mark a Student’s Test Complete• MUST manually mark the student’s test complete if
Student exits TestNav and will not resume testing Student accidentally exited a test instead of clicking
Submit• Ensure that you understand the reason the student exited
the test without submitting it. A reason must be entered in PearsonAccess.
• Marking the test complete only submits the student’s test, but it does not automatically invalidate a test. Invalidating a test – mark the test complete and complete the
necessary steps to invalidate.
• NEVER submit a student’s answers or mark a student’s test complete because of technical issues without first receiving directions from FDOE and/or Pearson.
99
School Assessment CoordinatorPearsonAccess – After Testing
Mark a Student’s Test Complete (continued)
1. Go to Test Management>Student Registration.2. Click the session name to which the student was
assigned.3. Select the check box for the student(s) on the Session
Details screen, and then click Mark Test Complete.
100
School Assessment CoordinatorPearsonAccess – After TestingMark a Student’s Test Complete (continued)
4. Enter the reason for marking the test(s) complete in the text box.• For multiple students with the same reason, select Use the
same reason for all students radio button.• For individual or multiple students with different reasons, select
Use different reasons for each student radio button.5. Click Save.
101
School Assessment CoordinatorPearsonAccess – After Testing
Stop Test Sessions 1. Once students have completed the test and submitted
their responses, click Stop to stop the session.
2. Click Yes – Stop Session to confirm.
3. A test session cannot be stopped until all students in the session are in Complete or Marked Complete status.
102
School Assessment CoordinatorPearsonAccess – After TestingInvalidate Tests (Updated Information--from Page 71 of
Manual)1. Log in to PearsonAccess.2. Go to Test Management>Student Registration.3. Click the Registered Students radio button. 4. Check the Show All Students check box or enter an individual student’s
information, then click the Search button. View all students on the lower half of the screen and click on the student name that requires an update.
5. Click the Assigned Tests tab.6. Click the Spring 2011 Reading Retake, the Spring 2011
Mathematics Retake, the Spring 2011 Grade 10 Mathematics or the EOC link.
7. Click the Edit button.8. Scroll down to the Do Not Score field for that student record.
Choose Yes if you wish to invalidate that test. Enter a reason in the Do Not Score Reason field.
9. Click Save when you have completed all edits.
Record Accommodations• All accommodations used by students must be recorded on the Student
Data screen in PearsonAccess. See the Spring 2011 Computer-Based Test Accommodations Guide for Grade 10 Mathematics and Reading and Mathematics Retakes provided at www.FLAssessments.com/CBTSpringAccommodations (mid-February)
103
School Assessment CoordinatorPearsonAccess – After Testing
Complete Comment Form
• Please provide feedback that will be meaningful to the FDOE and the test contractor.
Go to www.FLAssessments.com/SpringRMS or to the appropriate EOC Comment form under Pearson>Support>Resources.
Click the CBT School Assessment Coordinator Comment Form and complete the form.
THAT WASTHAT WASTHAT WASTHAT WAS
APPENDIX A
Test Administrator
Training andResponsibilities Before, During,
and AfterTesting
105
Test AdministratorChecklist – Before Testing Read the test administration manual. Read the Test Administration Policies and Procedures and sign the
FCAT CBT Administration and Security Agreement. Establish appropriate setting and remove or cover any unauthorized
visual aids. Prepare necessary forms to collect required administration
information. Prepare Security Log(s) to be used in testing room(s). Make copies of the Do Not Disturb sign and Electronic Devices sign
to post prior to testing. Receive your test group codes from school assessment coordinator. Assemble all materials. Ensure that students understand the electronic devices policy. Become familiar with accommodations specified on students’ IEPs or
Section 504 plans. Ensure that you are familiar with how to open TestNav to the login
screen for each student computer prior to testing.
106
Test AdministratorPrepare Testing Room
• Ensure that all software applications, including Internet browsers, are closed on all student workstations.
• Start TestNav and open each student workstation to the student login screen.
• Ensure that you have a way to contact the technology coordinator or school coordinator during testing without leaving the room unattended.
• Test Sessions have a unique six-digit test code (password) that will be printed on the Student Authorization Tickets and Session Roster. Test Code (password) is used to access the test. Test Group Code (4-digits) is used to identify groups of
students tested together.
107
• Students may not have any electronic or recording devices at their desks, in their pockets, or anywhere they can reach them during testing, even if the devices are turned off or the students do not use them. If a student is found to be in possession of ANY electronic
device(s) during testing, his or her test must be invalidated in order to successfully enforce this policy.
• Inappropriate actions by school or district personnel before, during, or after test administration may result in consequences such as test invalidations and/or loss of teaching certification. Carefully read the Test Security Policies and Procedures to
ensure that you are following the correct procedures. District assessment coordinators must require school
administrators, school assessment coordinators, test administrators, and proctors to sign an FCAT CBT Administration and Security Agreement.
Security of all test materials, including Student Authorization Tickets, must be maintained before, during, and after test administration.
Schools are required to maintain an accurate Security Log for each testing room.
Reminders for Spring 2011Computer-Based Testing
108
Test AdministratorChecklist – During Testing
Maintain your record of required administration information.
Ensure that proctors and anyone who enters a testing room for the purpose of monitoring the test sign the Security Log.
Administer the test according to the directions in the appropriate administration script and read the SAY boxes verbatim to students.
109
Test AdministratorSupervise Test Administration
• During testing, ensure that students: Clear the area around their workstations of all materials except for the
following: Student Authorization Tickets Pencils or pens Work Folders, if applicable Calculators, if applicable Reference Sheets, if applicable Reading Passage Booklets, if applicable
Do not have books, notes, extra scratch paper, or electronic devices of any kind (except for FCAT calculators) during testing, even if they do not use them
Do not talk or make any disturbance Work independently
• Test administrators MAY NOT: Talk with students about test items Help students with their answers Have any desktop-viewing programs or similar software that would
enable a test administrator to view test items and student responses Provide students with any information that would allow them to infer the
correct answer Discuss test items or answers with students even after testing has been
completed
110
Test AdministratorSupervise Test Administration
• If a computer is disconnected from the test: Contact the technology coordinator to help
diagnose any technical issues Contact the school assessment coordinator to
resume student’s test in PearsonAccess
If you have a Test Administrator account in PearsonAccess, you will be able to resume the student’s test and assist the student with logging in again.
111
• If the Internet connection is interrupted during testing: Student will still be able to complete the test. Student responses are automatically saved and, once
Internet connection has been restored, will be sent to Pearson.
IF the Internet connection is not restored by the time the student has finished the test, the test administrator should contact the school assessment coordinator or technology coordinator for assistance.
If there are issues on a specific computer Shut down the first computer and move student to another
computer that has been properly set up for testing. Student should be able to resume testing where he/she
left off if the responses were saved to the network. If a student cannot continue testing, document the
issue and determine whether invalidation is appropriate.
Test AdministratorSupervise Test Administration
112
Test Administrator PearsonAccess – During Testing
Resume Students’ Tests• Student exits TestNav (either unintentionally or intentionally) before
completing a test.• School Coordinator or Test Administrator must resume the test
before student can continue.1. On Session Details screen, click the check box next to the name of the
student. Student cannot be resumed if he/she has a Ready, Submitted, or Marked
Complete status.2. Click Resume Test (resumes the student’s test from the point at which
the test was interrupted). System will upload any test responses that the student entered and that were
saved. Once the connection to the testing server is reestablished and the student is
in Resumed-Upload status, the saved responses are transmitted to the testing server and added to the responses already stored there.
113
Test AdministratorChecklist – After Testing
Verify that you have collected all required administration information, including accommodations actually used by each student.
Report any missing materials to your school assessment coordinator.
Verify that Security Logs were completed correctly.
Organize materials and return to your school assessment coordinator.
Complete the CBT Test Administrator Comment Form at www.FLAssessments.com/SpringRMS or to the appropriate EOC Comment form under Pearson>Support>Resources.
114
Test AdministratorSteps for Returning Test Materials to School Assessment Coordinator
1. Notify school assessment coordinator immediately if any of the following are missing: Student Authorization Tickets Session Rosters Work Folders Reading Passage Booklets Reference Sheets
2. Verify that you have collected all required administration information. Ensure that all accommodations used by each student
are included.3. Verify that your Security Log has been completed
correctly.4. Return all materials to school assessment coordinator.5. Complete a CBT Test Administrator Comment Form.
115
Test AdministratorComment Form
Complete Comment Form
• Please provide feedback that will be meaningful to the FDOE and the test contractor.
Go to www.FLAssessments.com/SpringRMS or to the appropriate EOC Comment form under Pearson>Support>Resources. .
Click the CBT Test Administrator Comment Form and complete the form.
THAT WASTHAT WASTHAT WASTHAT WAS
APPENDIX B
Technology Coordinator
Before, During, and AfterTesting
117
Technology CoordinatorChecklist – Before Testing
Read the test administration manual. Read the Test Administration Policies and Procedures and
sign the FCAT CBT Administration and Security Agreement.
Ensure all workstations meet the minimum requirements, including screen resolutions set to 1024 x 768.
Confirm TestNav 6.9 software has been installed (file share or local install) on all computers to be used for testing.
Ensure all student workstations have successfully loaded the Infrastructure Trial.
Meet with the school assessment coordinator to discuss the administration of the computer-based test and to walk through the test administration.
118
Technology CoordinatorChecklist – Before Testing
Discuss and implement plans for handling possible technical interruptions during testing.
Run the TestNav System Check to determine the amount of bandwidth needed for testing.
Evaluate the testing locations in the school to ensure availability of sufficient electrical outlets and network jacks.
For wireless testing, ensure appropriate security protocols are used. The three most common protocols: Wired Equivalent Privacy (WEP) Wireless Access Protocol (WAP) Wireless Access Protocol Version 2 (WAP2) – RECOMMENDED
– highest level of security Verify that specified applications have been disabled prior
to computer-based testing. screen savers, automated virus scan software, remote access
applications, and the Macintosh control strip
119
Technology CoordinatorChecklist – Before Testing
Computers used for test administration activities (i.e., PearsonAccess) have the appropriate required version of a standard Internet browser based on the operating system in use on the computer and the browser’s pop-up blocker is disabled.
School has a high-speed connection to the Internet AND the connection is not over-allocated.
If a firewall is used, appropriate destination/port/protocol combinations are allowed through the firewall.
Any proxy servers have been checked to ensure that the appropriate URLs are not blocked.
Internet content filters are configured to allow the specific IP addresses required for administering computer-based testing.
Proctor Caching computers have been set up properly.
120
Technology CoordinatorChecklist – Before Testing
A printer (color is not required) is available for printing the Student Authorization Tickets and Session Rosters.
School technology coordinator has analyzed the network to determine whether network bottlenecks exist.
Confirm that student computers and the Proctor Caching computer have not been updated with any additional software and will not be updated before testing begins.
Confirm that test content has been cached for all scheduled test sessions. Test content is available one week prior to the test administration window.
Verify that the performance of your Internet connection is consistent with expected levels of performance for computer-based testing.
Alert your Internet Service Provider to your computer-based testing window, and also confirm that no scheduled maintenance or outages are planned during that entire window.
121
Technology CoordinatorChecklist – Before Testing
If utilizing wireless network connections for computer-based testing, ensure that all computers can effectively communicate with their access point from the testing location.
If utilizing wireless network connections for computer-based testing. Ensure that all security measures have been properly enabled. Ensure that laptops are connected to AC power. If batteries
must be used, ensure that they are fully charged and have the capacity to last for the entire test session.
Ensure that each computer station is equipped with a keyboard and mouse (or other pointing device).
Disable instant messaging and email notification. Disable screen savers, power savers, and remote desktop.
122
Technology CoordinatorChecklist – Before Testing Disable or delay anti-virus, auto-scan and/or auto-update, system
restore utilities, Windows Security Firewall, web content filtering, or other software that may impact CPU speed or scan/block information transferred between the workstation and the servers.
Alert your school to the dates and times for computer-based testing and require students and teachers not testing to refrain from using any streaming media or other high-bandwidth applications while students are testing.
Ensure student workstations and the user profiles and logins being used for testing allow full permissions (read-/write-/modify-) to the TestNav/Temp and TestNav/Logs directories.
Ensure that the primary and secondary save locations are set for student response files and that students have read-/write-access to these locations.
Ensure that test administrators are familiar with how to access TestNav software from student workstations and how to access the student comment forms (if shortcuts are provided).
On each day of testing, the Proctor Caching computer and Proctor Caching software will be turned on and remain running.
123
Technology CoordinatorChecklist – During Testing
Ensure Proctor Caching software is running on all Proctor Caching computers.• Turn on Proctor Caching software
Windows: go to Start>All Programs>Proctor Caching>Proctor_Caching
Mac: once Proctor Caching is initiated it will not have to be restarted unless it has been manually stopped.
Monitor each testing room to ensure that there are no technical issues.
Be available during testing to answer questions from test administrators.
124
Technology CoordinatorTasks – After Testing
Purge Test Content from the Proctor Caching Computer It is strongly recommended that test content be
purged from the Proctor Caching computer after each test administration window.
Windows Platforms1. Go to Start>Programs>Proctor Caching>Purge Cache.2. Click Delete to confirm that you would like to purge the cache.
If the Proctor Caching computer is not currently running, the cached items will not be removed until the next time it is started.
Mac Platforms1. Proctor Caching software includes functionality to purge all
content from the cache.2. To purge the cache, use the same script that was used to install
Proctor Caching.
125
Glossary of Terms• Proctor Caching is a process of loading or “caching” test content
locally on a computer at the school level. Does not require a separate caching server and can run on any
workstation on the network that meets minimum requirements. Proctor Caching software is provided by Pearson. Reduces test delays due to network congestion. Provides students with a more seamless testing experience. Required for all FCAT/EOC computer-based testing in Florida.
• Proctor Caching Network Diagram
126
Glossary of Terms
• TestNav 6.9 (TestNav) Platform that Florida will use for high-stakes computer-
based statewide assessments. Software application installed either on a file server or
on each computer that will be used for testing.
127
Technology CoordinatorWorkstation Specifications
General Specifications (Windows/PC and Apple/Macintosh)
Each computer must meet or exceed the following General Specifications in addition to the applicable Operating System Specifications below: 500 MB available disk space 1024x768 screen resolution Keyboard and mouse (or other pointing device) High-speed internet connection
Operating System Specifications
Windows/PC
Windows XP (Service Pack 3) Pentium III 733 MHz processor 512 MB RAM
Windows Vista (Service Pack 1) Pentium III 1 GHz processor 1 GB RAM
Windows 7 Pentium III 1 GHz processor 1 GB RAM
Apple/Macintosh
Mac OS X 10.4G3, G4, G5 500 MHz processor512 MB RAM
Mac OS X 10.5Intel, G4, G5 867 MHz processor512 MB RAM
Mac OS X 10.6Intel processor1 GB RAM
128
Technology CoordinatorSystem Check for TestNav• Tool used to perform an initial bandwidth and configuration test
for a district or school infrastructure.• Go to www.FLAssessments.com/SystemCheck
TestNav 6 tab instructions for verifying TestNav has been installed correctly tests any computers that did not participate in the Infrastructure Trial
or any new computers that have been added Network User Capacity tab
tests the bandwidth among student workstations, Proctor Caching computer(s), and Pearson servers
tool provides an estimate of how many students can be tested on the designated Proctor Caching computer
Testing Volume Calculator tab tool estimates how many students are able to test concurrently while
taking the amount of available bandwidth and network traffic volume into account
129
Technology CoordinatorSystem Check for TestNav
System Check for TestNav1. Click the TestNav 6 tab and follow the instructions provided.2. Once you see the “Congratulations” screen in the TestNav
window, click the Network User Capacity tab.3. Click Add Caching Server.
Enter a generic name for the Proctor Caching computer to be tested, the IP address of the Proctor Caching computer, and port 4480. Click Save.
If working in a multiple Caching Server environment, repeat this step as needed to add additional Proctor Caching computers.
130
Technology CoordinatorSystem Check for TestNav
System Check for TestNav (continued)
4. Click Start and System Check will perform a bandwidth test. Once the test has been run, System Check will show an
estimate for how many students can be tested on the specified Proctor Caching computer(s).
131
Technology CoordinatorSystem Check for TestNav
System Check for TestNav Process (continued)
5. Click the Testing Volume Calculator tab. Tool will estimate how many users can be tested with
the available bandwidth.
132
Technology CoordinatorSystem Check for TestNavSystem Check for TestNav (continued)6. Enter the number of students that will be testing concurrently on a
Proctor Caching computer. 7. Slide the green bar under “Available link speed between workstations
and Proctor Caching workstations” to specify the available bandwidth between the testing workstations and the Proctor Caching computer. This number can be based on the results of the Network User Capacity tab or on
information provided by district or school analysis of network.
Enter # of studentsEnter # of students
Available Link SpeedAvailable Link Speed
133
Technology CoordinatorSystem Check for TestNavSystem Check for TestNav Process (continued)8. Slide the green bar under “Average network utilization for the network
between workstations and Proctor Caching workstations” to indicate the percentage of bandwidth normally used at this site (excluding the bandwidth that will be used for testing). • This percentage is based on district or school analysis of network usage. • It is recommended that the times of day/week students will be testing be
analyzed to determine peak usage, and that peak usage be entered in this percentage.
Average Network Utilization
Average Network Utilization
134
Technology CoordinatorSystem Check for TestNavSystem Check for TestNav (continued)
9. Once this is done, the “Outputs” box will now be white, yellow, or red.
135
Technology CoordinatorSystem Check for TestNav
System Check for TestNav (continued)
• In order for the test administration to be successful, it is highly recommended that the Outputs box display a WHITE background. Red and Yellow backgrounds – you may encounter
difficulties during testing Make adjustments on the calculator to create the ideal
testing situation (e.g., reduce the number of students testing at once)
• Create a testing plan for your school based on the number of students, Proctor Caching machines, and bandwidth needed.
136
Technology CoordinatorProctor Caching
• Computers used for Proctor Caching do not need to be server-class machines but should meet the system requirements Proctor Caching can run on either a Windows or Mac operating
system, and each can support both Windows and Mac-based testing workstations.
• Each testing computer must be configured to refer to a Proctor Caching computer in order to obtain test content. If more than one computer is being used for Proctor Caching,
make sure to specify the specific IP address of the correct Proctor Caching computer during the TestNav installation process.
For example: if there are 80 computers that may be used for testing and two Proctor Caching computers, 40 of the testing computers may be configured to link to Proctor Caching computer A, and the remaining 40 may link to Proctor Caching computer B.
137
Technology CoordinatorProctor Caching
• Proctor Caching Security Proctor Caching software stores a copy of the test
content on the local hard drive of the machine on which it runs.
Test content transmitted and stored by the Proctor Caching computer is in encrypted format. At no time does the Proctor Caching computer un-encrypt
the test items. “Purge cache” function deletes all encrypted test content
from the hard drive of the Proctor Caching computer. FDOE and Pearson require that test content be purged at
the end of each administration window.
• Proctor Caching Computer Placement Proctor caching can be implemented at either the lab- or
the school-level. Computer should be located as close as possible on the
network to the student workstations.
138
Technology CoordinatorProctor Caching – Windows Install
Downloading and Installing the Proctor Caching Software for Windows
• Software only needs to be downloaded to the Proctor Caching computer(s) once per school year, unless otherwise indicated by FDOE or Pearson.
Setting up Proctor Caching computer(s) for the first time1. Download the Proctor Caching software for Windows to the
designated Proctor Caching computer. The Proctor Caching software can be found at
www.FLAssessments.com/Downloads.2. Double-click the Proctor_Caching.exe file to launch the software
installer. • If you receive a warning message, click to continue and run the
installer.3. Click Install to run the installer.
139
Technology CoordinatorProctor Caching – Windows InstallSetting up Proctor Caching computer(s) for the first time
(continued)
4. A window displaying system requirements will appear. Disregard the requirements listed. Click Next.
5. A prompt will appear asking you to specify the install location. Specify the preferred installation location and click Next.
6. A screen will ask for the address of an upstream proxy.• If your school does not have one, leave these two fields blank and click Next.• DO NOTDO NOT enter the IP address of the Proctor Caching computer here.
If the IP address is entered here, Proctor Caching will not function correctly.
Screen for #5Screen for #5 Screen for #6Screen for #6
140
Technology CoordinatorProctor Caching – Windows Install7. Click Install.
8. When the installation is finished, click Continue and then Finish.9. Verify that Proctor Caching is working.
• Go to Start>All Programs>Proctor Caching>Proctor_CachingA window will appear as shown below.
141
Technology CoordinatorProctor Caching – Windows Install10. Open a web browser and enter the IP address of the Proctor Caching computer followed by port 4480 (e.g., HTTP://x.x.x.:4480) and hit the
Return/Enter key. You will see an error message. This does not indicate a problem.
If Proctor Caching is not responding, one of the following messages may be displayed:
11. Take note of the IP address of the Proctor Caching computer as it will be needed when installing TestNav.
Proctor Caching is not responding, one of the following message may be displayed.
142
Technology CoordinatorProctor Caching – Windows Uninstall
Uninstall Proctor Caching• Proctor Caching will only need to be uninstalled if the
computer no longer needs to be used as a Proctor Caching computer.1. Go to Start > Settings > Control Panel > Add or Remove
Programs.2. Within the Add or Remove Programs utility, select
Measurement Services – Proctor Caching and click the Change/Remove button.
1. Place a check mark in the box next to all components to remove the entire product. Click Next.
143
Technology CoordinatorProctor Caching – Windows Uninstall
Uninstall Proctor Caching4. A screen will confirm the
items to be removed. Click Next.
5. Click Uninstall and then Finish to remove the Proctor Caching software.
6. Proctor Caching has been successfully uninstalled.
144
Technology CoordinatorProctor Caching – Mac Install
Downloading and Installing the Proctor Caching Software for Mac
• Software only needs to be downloaded to the Proctor Caching computer(s) once per school year, unless otherwise indicated by FDOE or Pearson.
• Mac uses the native Apache web server that is built into the OS X operating system; to perform Proctor Caching functions download two files (need administrator-level access): Configuration Settings Configuration Script
Setting up Proctor Caching computer(s) for the first time
1. Point browser to www.FLAssessments.com/Downloads.
2. Download the Proctor Caching script and setting files to the designated Proctor Caching computer. There are different files for Mac OS X 10.6 and 10.6 Server as well as
Mac OS X 10.5 and 10.5 Server.
145
Technology CoordinatorProctor Caching – Mac Install
3. If the files open in your web browser instead of being saved to your disk, use the File>Save As command to save the files to your desktop.
4. Open a Terminal window by double-clicking the Macintosh HD icon on the desktop, or opening a Finder window and clicking Macintosh HD. 1. Navigate to Applications/Utilities. 2. Double-click Terminal.
146
Technology CoordinatorProctor Caching – Mac Install• Steps for Mac OS X 10.4 Proctor Caching
Execute the script by typing the following in the terminal window and hit the Return/Enter key:
chmod +x ~/desktop/config_proctor_caching_10_2.command• Steps for Mac OS X 10.5 Proctor Caching
Execute the script by typing the following in the terminal window and hit the Return/Enter key:
chmod +x ~/desktop/config_proctor_caching_10_5.command• Steps for Mac OS X 10.5 Server Proctor Caching
Download the script to your desktop Type the following in the Terminal window and hit the Return/Enter
key:chmod +x ~/desktop/config_proctor_caching_10_5_Server.command
Because OS X Server does not have a user’s folder, you will need to create the folder. Open Terminal Type the following in the Terminal window and hit the Return/Enter
key:cd /private/etc/apache2/ Type sudo mkdir users and hit the Return/Enter key Enter the password; you can then rerun the script
147
Technology CoordinatorProctor Caching – Mac Install
• Steps for Mac OS X 10.6 Proctor Caching Execute the script by typing the following in the terminal window
and hit the Return/Enter key.chmod +x ~/desktop/config_proctor_caching_10_6.command
• Steps for Mac OS X 10.6 Server Proctor Caching Type the following in the Terminal window and hit the
Return/Enter key:chmod +x
~/desktop/config_proctor_caching_10_6_Server.commandBecause OS X Server does not have a user’s folder, you will need to create
the folder. Open Terminal Type the following in the Terminal window and hit the
Return/Enter key:cd /private/etc/apache2/ Type sudo mkdir users and hit the Return/Enter key Enter the password; you can then rerun the script
148
Technology CoordinatorProctor Caching – Mac Install
5. For all Mac OS X versions, double-click the config_proctor_caching.command icon on your desktop to launch script.
6. Type your password and hit the Return/Enter key.
7. Select option 1 — Install Proctor Caching Server.
149
Technology CoordinatorProctor Caching – Mac Install
8. You will now be asked if a proxy server is being used. Type Yes or No and hit the Return/Enter key.
9. If you selected Yes, enter the IP address and port number of the upstream proxy server when prompted.
10. Once the script has finished configuring Proctor Caching, it will display a confirmation message.
11. Proctor Caching Installation is now complete. Proctor Caching will remain in operation on the Mac until it is uninstalled.
150
Technology CoordinatorProctor Caching – Mac Install
12. To verify that Proctor Caching is working from the Proctor Caching computer, open a browser and type http://localhost:4480 in the address bar and hit the Return/Enter key.
You should see a message stating “It works!” to show that Proctor Caching is working.
13. Take note of the IP address of the Proctor Caching computer as it will be needed later on when installing TestNav.
151
Technology CoordinatorProctor Caching – Mac Uninstall
Uninstall Proctor Caching• Proctor Caching will only need to be uninstalled if the computer no
longer needs to be used as a Proctor Caching computer.
1. Double-click the config_proctor_caching.command icon located on the desktop.
2. Enter your password (if prompted).3. From the list of options, select option 3 — Uninstall Proctor Caching
Server.
152
Technology CoordinatorTestNav• Once TestNav has been properly installed and tested, it should
continue to be successful on student workstations through the test administration, as long as no incompatible software updates are made.
• Annual updates to TestNav may require re-installation of software.File Share vs. Local Install• Two options for installing TestNav
File Share Local Install
153
Technology CoordinatorTestNav
Downloading TestNav 6.9
1. Go to www.FLAssessments.com/Downloads.
2. Click the appropriate link (Windows or Mac) to download the TestNav application to your workstation.
3. After downloading TestNav, make note of the name and location of the downloaded file on your workstation.
154
Technology CoordinatorTestNav
Downloading TestNav 6.9• Two options for installing TestNav, local install or file
share Installation process is almost identical – differences are
noted in steps 3 and 8.1. Go to the downloaded TestNav application on your
client workstation and double-click the TestNav application.
• If you receive a warning message, click to continue and
run the installer. • Introduction screen will open.
155
Technology CoordinatorTestNav2. Read the instructions, and then click Next.
Choose Install Folder. A screen opens and the default installation folder will appear in the text box.
3. Click Choose to access the location you want to choose as your new TestNav installation folder. Note: If installing to a file share, click Choose and select the
network directory where you want to install TestNav. If installing to a local workstation, select the hard drive directory
where you want to install TestNav. Do not use a UNC path to install TestNav.
156
Technology CoordinatorTestNav
4. After choosing the TestNav installation folder, click Next to open the Select Response File Save Location screen.
5. After selecting a save location, click Next to open the Enter Proctor Caching Settings Screen.
157
Technology CoordinatorTestNav
6. Proctor Caching computer must be used for testing.• IP Address entered here will be that of the machine(s) set
up to be used for Proctor Caching.• Fill in the Proctor Caching address and Proctor Caching
port 4480.
158
Technology CoordinatorTestNav
7. Click Install to continue the TestNav installation and open the Installing TestNav screen.
8. TestNav installation is complete when a confirmation screen appears.Click Done.• If you selected a file share installation, create shortcuts on each
testing workstation that refer to the file share installation directory.
159
Technology CoordinatorTestNavConfiguring TestNav to Use Proctor Caching After the Installation Process• If TestNav has been installed on a file share or locally and has
not been configured to use Proctor Caching or if you need to add or modify existing Proctor Caching configurations, follow these steps:1. Go to the TestNav installation directory X:\.....\TestNav\2. Within the TestNav directory, there will be a file named
proxysettings.properties. Open the file with Notepad or TextEdit.
3. To configure TestNav for use with Proctor Caching, enter the IP address of the Caching computer into Proxy_Host= line AND enter port number 4480 into the Proxy_Port= line.
4. Save the file and TestNav will be configured to use Proctor Caching.
160
Technology CoordinatorTestNav
Configuring Browser Settings for Pre-Caching Content• Once test session(s) have been created, the next step is to pre-
cache test content. Tests can be pre-cached one week prior to the first day of the
administration window.• Test content should be pre-cached so that it is locally available
on the Proctor Caching computer when students begin testing. PearsonAccess includes “pre-fetch” functionality to enable test
proctors to load the Proctor Caching computer with content. “Pre-fetch” functionality can be accessed by clicking the Proctor
Caching link on the Session Details screen in Test Setup>Manage Test Sessions.
• Tests will be available to cache one week prior to the first day of the test administration window (unless otherwise indicated by FDOE).
• Cache tests from a computer that is not the Proctor Caching computer. A test can be cached from any computer on the same network as the Caching computer.
161
Technology CoordinatorTestNavConfiguring Browser Settings for Pre-Caching Content• Complete Steps 1-3 to cache a test on Windows machines. Go
to Step 3 for Mac machines.1. To cache a test, go to the Proctor Caching computer and start the
caching service by going to Start>All Programs>Proctor Caching>Proctor_Caching.
2. A window will open with the status of the Proctor Cache. Minimize the window while Proctor Caching is running, but do not
close the window.
3. To cache a test, change the proxy settings within the browser: Internet Explorer (Windows), Mozilla Firefox (Windows/Mac), Safari (Mac). See instructions on pages 96-98 of the manual.
162
Technology CoordinatorTestNav
Caching Test ContentComplete the following steps:1. Go to Test Management>Manage Test Sessions. 2. Select a session to cache and click Proctor Caching.
Note: While proxy settings are in place, the PearsonAccess website is the only website that can be accessed.
3. A page will be displayed with the instructions. Click Next.4. A page will be displayed with the contents to be cached. Click Next. 5. A page will now be displayed showing the progress of the caching
process.6. After all test items have been received (100% cached), the status
page on the workstation will present a confirmation page. Now, the Proctor Caching computer should be ready for students to begin testing.
163
Technology CoordinatorTestNav
Launching TestNav1. TestNav is launched by double-clicking the TestNav icon
on the desktop.
Common Error Codes and Solutions
Testnav.lnk
164
Technology CoordinatorTestNavCommon Error Codes and Solutions
165
Technology CoordinatorComment Form
Complete Comment Form
• Please provide feedback that will be meaningful to the FDOE and the test contractor.
Go to www.FLAssessments.com/SpringRMS or to the appropriate EOC Comment form under Pearson>Support>Resources.
Click the CBT Technology Coordinator Comment Form and complete the form.
THAT WASTHAT WASTHAT WASTHAT WAS
166
2010-11 7 8 9 10 11 12
2009-10 6 7 8 9 10 11
2008-09 6 7 8 9 10
2007-08 6 7 8 9
ALG 1 EOC: WHO TESTST?
IF we have to test students who took Alg 1 or an equivalent course prior to 2010-11, WHO DO WE INCLUDE???
1. First, any student who completed Alg 1 or an equivalent course this school year must participate in the assessment , no matter what grade they are in.
2. IF the Florida statue is not changed to waive PREVIOUS Alg 1 students: You will test students who earned high school credit in Algebra 1 while in grades 6 through 9 during the 2007–2008 through 2009–2010 school years and who have not taken Grade 10 FCAT Mathematics must take the Algebra 1 End-of Course Assessment during the 2010–2011 school year.