brakes and wheels

Brakes and WheelsSECTION

10IN THIS SECTION:

• BRAKE CONVERSIONS • POWER BRAKES • BRAKE PADS • BRAKE SHOES• MASTER CYLINDER• BRAKE LINES• EMERGENCY BRAKES • WHEELS• TIRES• HUBCAPS

Ever try to stop a blown and injected big block car with drum brakes? Honestly, we don’t know how we did it back in the day. But this is no longer a concern as Danchuk has upgraded brake sys-tems to fit any build from mild to wild.

In the brakes and wheels section you will find 2 and 4 wheel disc brake conversions, dropped spindles to lower your ride and keep you safe, power brake master and booster kits along with hydro-boost systems that don’t care how big your cam is. Our roller bearing conversion kit is just the ticket for projects using wider aftermarket wheels and stock spindles and we have rebuild kits for your original master or a replacement if yours is too far gone.

You will also find new brake lines, parking brake assemblies, brake hoses, new drums, rotors, front and rear wheel bearings, new parking brake brackets, screws, rollers and cables, and new original style steel wheels that clear disc brakes. We offer custom wheels by American Racing and Showwheels as well as correct style wide white wall tires and wide white radials too, brand new stainless hub caps for Bel Air or 210 and our own decal kits to bring yours back to showroom condi-tion. And how could we leave out the Danchuk ‘57 Bel Air wheel spinner assemblies, proudly made in the USA! Danchuk, There’s no comparison!

Phone : (800) 854-6911 • www.danchuk.com 331330

Brak

es Brakes

Brakes

BR

AK

E CO

NV

ERSIO

N

COMPLETE REAR END DISC BRAKE KITSGet the ultimate in braking power by converting to four wheel disc brakes with a rear disc brake conversion kit. More consistent stopping and less fade than the original drum brakes. For stock and 10/12 bolt rear ends only. Easy bolt-on installation. Kit includes 11” rotors, calipers with built-in E-brake, rubber hose kit and all mounting hardware. Upgraded versions come with braided stain-less hoses and cross-drilled and gas slotted rotors. Not for use with factory style 14" or 15" steel wheels.1955-64 Stock Rear End, Standard ............................................................................. #2701A ...................................$699.95/kit1955-57 Stock Rear End, w/ Performance Upgrades ................................................ #14264 ...................................$784.95/kit1955-57 10/12 Bolt, Standard ...................................................................................... #16945 ...................................$599.95/kit1955-57 10/12 Bolt, w/ Performance Upgrades .......................................................... #16943 ...................................$729.95/kit

4-WHEEL DISC BRAKE CONVERSION KITSYou’ve been asking for a single part number, all in one, 4-wheel disc brake kit and here they are. These kits use the minimum offset front disc brake kit and stock rear end rear disc brake kit. You get calipers, cross drilled and slotted rotors, an 8" dual booster/master/prop-valve assembly, all necessary hardware, brackets, cables, front hoses and pre-bent brake lines. You will need to purchase a front to rear frame brake line and rear flex hose or reuse your existing parts. Will not clear stock 1957 14" wheels.1955-57 for Stock Spindles ......................................................................................... #15264 .................................$1295.00/kit1955-57 with Dropped Spindles .................................................................................. #15265 .................................$1395.00/kit1955-57 with Dropped Spindles, Chrome Booster, Master Cylinder & Prop. Valve . #16494 .................................. $1749.00/kit1955-57 for Stock Spindles, Chrome Booster, Master Cylinder and Prop. Valve ..... #16495 .................................$1649.00/kit

STOCK SPINDLE FRONT DISC BRAKE CONVERSION COMPONENTSStandard kit contains rotors, calipers, pads, seals, bearings and rubber hoses. The performance upgrades feature stainless brake hoses and cross-drilled and gas slotted rotors for use with our #797 brake kit stock spindles only. Will not clear ‘57 stock wheels. See page 351 for stock wheels. Part #2700 uses an 11" rotor and the #2703 uses a 10-1/2" rotor.1955-57 (Shown) .......................................................................................................... #2700 .....................................$364.95/kit1955-57 Stock Spindles w/ Performance Upgrades .................................................. #14262 ...................................$419.95/kit

FRONT TO REAR BRAKE LINES FOR DISC BRAKE CONVERSIONSFront line from proportioning valve to caliper hose. Rear line from proportioning valve to rear end hose. For disc brake conversions. Complete set from proportioning valve to rear cylinders. Runs outside the frame.1955-57 Steel ................................................................................................................ #10122 ...................................$124.95/set1955-57 Stainless ......................................................................................................... #10123 ....................................$167.95/set

2” DROPPED SPINDLE FRONT DISC BRAKE CONVERSION KITSStandard kit includes rotors, calipers, pads, seals, bearings and rubber hoses. The Performance Upgrades feature stainless brake hoses and crossed-drilled and gas slotted rotors for use with our #2089 2" dropped spindles kits. 1955-57 For Dropped Spindle Conversion ................................................................. #2703 .....................................$309.95/kit1955-57 Drop Spindles w/ Performance Upgrades ................................................... #14263 ...................................$372.95/kit

UPGRADED

BR

AK

E CO

NV

ERSI

ON

STANDARD


Brak

es Brakes

Brakes

BR

AK

E CO

NV

ERSIO

NMIN-OFFSET FRONT DISC BRAKE CONVERSION KITS FOR USE WITH STOCK SPINDLESMinimum offset kits for stock spindles move the wheels out 3/8" compared to 7/8" in other kits. Kits include; caliper brackets, calipers, rotors, bearings, seals, dust caps, hoses, and hardware for a hassle free installation. Works with 14" disc brake wheels. 1955-57 w/ Upgraded Rotors & Hoses...........................................#15254....................... $548.95/kit1955-57 w/ Standard Rotors & Hoses...........................................#15255....................... $448.95/kit

MIN-OFFSET FRONT DISC BRAKE CONVERSION KITS FOR USE WITH DROPPED SPINDLESMinimum offset kits for drop spindles move the wheels in 3/16" from original and includes dropped spindles. Kits include; caliper brackets, calipers, rotors, bearings, seals, dust caps, hoses, and hardware for a hassle free installation. Will not clear stock ‘57 14" wheels.1955-57 w/ Upgraded Rotors & Hoses ....................................................................... #15256 ...................................$598.95/kit1955-57 w/ Standard Rotors & Hoses ........................................................................ #15257 ...................................$498.95/kit

BR

AK

E CO

NV

ERSI

ON

BIG BRAKE DISC CONVERSION KITSBig Brake Kits use a 13" rotor up front and a 12" on the rear. They feature red powder coated calipers, braided steel hoses, alu-minum hubs, Zinc washed cross drilled and slotted rotors, rear cables and all the needed brackets and hardware to get the job done right. Part #15263 includes a dropped spindle. When installing the front and rear kit, #15262, you will need to purchase a front to rear frame line and rear flexible hose or reuse your existing parts. 17" or larger wheel is required for clearance. 1955-57 Front, 13" ........................................................................................................ #15260 ...................................$902.95/kit1955-57 Rear, 12" ......................................................................................................... #15261 ...................................$802.95/kit1955-57 Front & Rear ................................................................................................... #15262 .................................$1650.00/kit1955-57 Front, 13" with 2" Dropped Spindle ............................................................. #15263 ...................................$995.00/kit1955-57 Rear, 12", Ford 9-inch with 3/8" Flange Stud .............................................. #16358 ...................................$699.00/kit 1955-57 Rear, 12", Ford 9-inch with 1/2" Flange Stud .............................................. #16359 ...................................$699.00/kit 1955-57 Rear, 12", 10/12 Bolt Rear Ends with Upgraded Rotors and Hoses ........... #16944 ................................... $749.95/kit

REAR DISC BRAKE KITS FOR FORD 9” REARIf you have installed a Ford 9" rear end in your classic and want to have rear disc brakes, this is the kit for you. This complete kit will work for both small and large bearing Ford 9" rears and comes with everything you need to install it on your classic. Part #16240 includes standard 11" brake rotors, calipers and rubber hoses, while part #16241 includes 11" performance drilled/slotted brake rotors, calipers and braided stainless steel hoses. 1955-57 Standard Set-Up ............................................................................................ #16240 ...................................$599.95/kit1955-57 Performance Upgraded Set-Up .................................................................... #16241 ...................................$738.95/kit


Brak

es Brakes

Brakes

BR

AK

E CO

NV

ERSIO

NB

RA

KE

CO

NV

ERSI

ON

BAER SS4 REAR DISC BRAKE KITSThe SS4 Rear system was designed to go along with our Track4 front of-fering. This features a 12" 1-piece rotor with a drum in hat park brake with a full billet backing plate.1955-57 12" ................................................................................................................... #17287 .................................$1295.95/kit

The SS4+ 13" rear is a great option for a customer looking at the Pro+ front, or Extreme+ front that doesn’t need or want that big of a brake on the rear. The SS4+ 13" features a 13" 2-piece rotor with a drum in hat park brake.1955-57 13" ................................................................................................................... #17288 .................................$1395.95/kit

BAER PRO+ FRONT DISC BRAKE KIT FOR HEIDT'S SPINDLES 1955-57 13" .............................................................................#17286 ... $2245.95/kit

BAER SS4+ FRONT DISC BRAKE KIT FOR HEIDT’S SPINDLES 1955-57 11"..............................................................................#17284 ... $1206.95/kit

BAER BRAKE PRO+ FRONT OE SPINDLE DISC BRAKE KITThe Pro+ will allow you to upgrade to a 2-piece rotor (a popular upgrade due to cosmet-ics and weight savings) and give you 6 piston calipers. This is the first system we offer that will allow you to have the exact same looking brake front and rear! (Note: Baer is the only company to offer this).The SS4+ rear option is a cost effective, cosmetically matching rear option as well!1955-57 13" .............................................................................#17283 ... $2245.95/kit

BAER BRAKE SS4+ FRONT OE SPINDLE DISC BRAKE KITThe SS4+ front system features all the benefits of our larger brake systems just in a smaller package to fit 15" wheels. This is a perfect system for the customer looking to retain a factory type 15" wheel, or the enthusiast that wants to have a larger wheel with the option to go back to that stock look.1955-57 11"..............................................................................#17281 ... $1095.95/kit

BAER BRAKE TRACK4 FRONT OE SPINDLE DISC BRAKE KITThe Track4 is Baer’s most popular front offering, The Track4 is available with 13" 1-piece rotors and is a great brake upgrade for customers looking to fill their 17" wheels, up-dated their car to a modern brake and have a great visual impact! Like all our other systems this will come complete with everything needed to mount to the corners on the car. Looking for a matching rear kit? Check out the SS4 as a matching rear option with park brake. See #’s 17287-17288.1955-57 13" .............................................................................#17282 ... $1595.95/kit

BAER TRACK4 FRONT DISC BRAKE KIT FOR HEIDT’S SPINDLES1955-57 13" .............................................................................#17285 ... $1595.95/kit

COMPLETE MIN-OFFSETFRONT DISC BRAKE CONVERSION KITSThis all-in-one minimum offset front disc brake kit includes calipers, cross drilled and slotted rotors, an 8" dual booster/master/prop-valve assembly, stainless hoses, all necessary hardware, brackets and pre-bent lines. Dropped spindle kit is for CPP dropped spindles. Will not clear stock 1957 14" wheels. See page 339 for an offset power brake booster bracket for tall valve cover applications.1955-57 Stock Spindles .................#15266.............$669.95/kit1955-57 Dropped Spindles ............#15267.............$769.95/kit

#17283

#17281

#17282

LIKE USON FACEBOOK!

Post pictures of your car on our Facebook page for a chance to be featured in Danchuk media!

Thanks for Your Facebook Post!


Brak

es Brakes

Brakes

BR

AK

E CO

NV

ERSIO

N

PROPORTIONING VALVES All Adjustable .... #2521 ........$52.95/ea.All Disc/Drum .... #2521A .....$52.95/ea.All 4-Wheel Disc #2521B .....$52.95/ea.

ADjUSTABLE PROPORTION-ING VALVE AND DISTRIBUTION BLOCK KITSProportioning valve and brake light switch all-in-one. It’s designed for dual reservoir master cylinders and has 2 inlets, 2 outlets for front brakes and 1 outlet for the rear brakes. Kits include 5 stainless 3/16" fit-tings, brake light switch and wiring pigtail.All Black ............ #15060 .... $139.95/kitAll Polished ....... #15061 .... $154.95/kit

BR

AK

E CO

NV

ERSI

ON

FRONT CALIPERS WITH DISC CONVERSION STOCK OR DROPPED SPINDLESThis replacement loaded metric caliper can be mounted on either side and features a larger piston for more stopping force.1955-57 .............. #12411 ......$65.95/ea.

HEIDT’S 2-INCH STEEL DROPPED SPINDLESUse with dropped spindles brake com-ponents, part #2703 shown on 330. Can accept large or small GM calipers. Contact Wilwood for Wilwood brackets.1955-57 w/ Small Caliper Metric Brackets ...........................#2089 ...... $418.95/pr.1955-57 w/ Large Caliper Brackets .......................................#2089A .... $399.95/pr.

STOCK SPINDLE BOLTS1955-57 .............. #2696 ....... $12.95/set

STOCK SPINDLE BRAKE ROTORFor stock spindle disc conversions.1955-57 .............. #12410 ......$52.95/ea.

2-INCH DROPPED SPINDLES WITH 12-INCH ROTORSKit features dropped spindles with integrated steering arms, cross-drilled rotors and braided steel lines. Not compat-ible with rack and pinion systems. Will work with most aftermarket 15" wheels. Will not work with OE wheels.1955-57 w/ 12" Rotors & Calipers .........................................#12814 .....$575.00/kit

CLASSIC PERFORMANCE MODULAR DROPPED SPINDLESModular drop spindles offer you the flexibility to install either 11" rotors or go “BIG” with a 13" disc brake conversion kit. There is no loss of turning radius and they accept stock and Unisteer steering arms. When used with 11" rotors the wheels are moved in 3/16", with the 13" rotors they are moved out 1/2". Works with 15" or larger disc brake wheels. 1955-57 2", w/ Small Metric Caliper Brackets ......................#15259 ..... $299.95/pr.1955-57 2", w/ Large Caliper Brackets .................................#15259A ..$299.95/pr.

FRONT DISC BRAKE CONVERSION KIT BRACKETSThis simple kit bolts on to your existing stock spindles. Each kit contains adapting brackets, hardware and in-structions that will inform you which parts are necessary for your application. We carry the rotors, calipers, master cylin-der, power booster, and proportioning valve. This kit is extremely well engineered. We wouldn’t short-sell your safety! (Note: Check your tire clearance before installation. This kit will increase the width of your car by as much as 7/8" per side.) Made in the USA.1955-57 ...................................................................................#797 ........ $109.95/kit

STOCK HEIGHT SPINDLES1955-57 1-Piece Forged, Drum/Disc

........................ #16977 .... $159.95/pr.

CHROME DISC/DRUM PROPORTIONING VALVE KITS 1955-57 Disc/Drum.................................................................#17151 ..... $109.95/kit1955-57 Disc/Disc ..................................................................#17152 ..... $109.95/kit

PROPORTIONING VALVE BRACKET AND LINE KITAll Chrome .............................................................................#17155 ....... $49.95/kit

PROPORTIONING VALVEBRACKET & LINE KIT1955-57 .............. #11205 ...... $16.95/kit PROPORTIONING VALVE

BRACKETFor use with 605 box. Will not work with stock box. Some modifications to brake lines are necessary.1955-57 .............. #12186 ......$28.95/ea.

COMBINATION/PROP VALVE TOOL For brake systems utilizing preset prop. valves (2521A/B). Use this tool when bleeding your brakes to lock the valve in place and keep it from tripping, making it difficult to properly bleed the brake system. Installs in place of the warning light switch. Replace warning light switch when bleed-ing is complete.All ....................... #16941 ....... $11.95/pr.

ADjUSTABLEPROPORTIONING VALVEAll Chrome ........ #17574 ...... $64.95/pr.

#2521

#2521A


Brak

es Brakes

Brakes

HYDRAULIC ASSIST POWER BRAKE CONVERSION KITSHydratech hydro-boost braking systems use the power steering pump to power the hydro-boost, which means you have no problems with low vacuum like you have with traditional vacuum assist power brake systems. By going with a hydro-boost system, which is not dependent on engine speed or engine vacuum, you don’t need to mess with vacuum cans, pumps or electronic gadgets which only offer a temporary solution to low vacuum problems. Hydro-boost systems provide substantial gains in overall braking power and the fastest braking response time of any power brake system available. Danchuk offers 2 levels of kits to fit your particular application. Level 3 kits are ideal for floor shift cars, as they tend to interfere with stock column shift link-ages. Level 4 kits give you maximum engine and column clearance and are ideal for column shift cars and tall block big block cars. Your car must have power steering to use a hydro-boost system and these systems are designed to be used with master cylinders with a shallow bore piston. Recommended for cars with at least front disc brakes. Parts #15456 and #15457 come complete with the CPP #15370 chrome plated master cylinder shown on page 340.1955-57 w/ Lines, Level 3 ......................................................#13983 ..... $795.95/kit1955-57 w/o Lines, Level 3 ....................................................#13984 ..... $599.95/kit1955-57 w/Hoses & Chrome Master Cylinder, Level 3 ........#15456 .... $958.95/kit1955-57 w/ Lines, Level 4 ......................................................#13985* ... $862.95/kit1955-57 w/o Lines, Level 4 ....................................................#13986* ...$625.00/kit1955-57 w/Hoses & Chrome Master Cylinder, Level 4 ........#15457 .....$895.00/kit* Note: Level 4 kits are recommended if car is using factory column shifter.

CHROME POWER BRAKEBOOSTER CONVERSION KITSThese are our most popular power disc brake conversion kits in chrome. They feature a chromed master, cap, bracket, prop valve and stainless lines.1955-57 Disc/Drum, 8", Dual Diaphragm ..............................#14321 ..... $644.95/kit1955-57 Disc/Disc, 8", Dual Diaphragm ...............................#14322 ..... $644.95/kit1955-57 Disc/Drum, 7" Dual Diaphragm ..............................#15270 ..... $549.95/kit1955-57 Disc/Disc, 7" Dual Diaphragm ................................#15271 ..... $549.95/kit

BRAKE POWER BOOSTERS WITH BRACKETSFor those building their own brake kit or those who want to update to power brakes. These boosters come with the proper bracket and pedal rod along with long and short master cylinder push-rods to work with both shallow and deep bore master cylinders.1955-57 8" Dual .............................. #16644 .........$199.95/ea. 1955-57 8" Dual, Chrome ............... #16645 .........$279.95/ea.

POWER BRAKE CONVERSION KITSUpdate your braking system with these power brake units which provide you with improved braking power with minimal pedal effort. Installation is simple; just bolt the unit to the firewall and drill a new hole in the pedal arm to attach the pushrod. Dual reservoir brake systems provide an extra measure of safety, but will require additional lines. Power boosters require a minimum of 17" of vacuum, if your engine produces less, we suggest you check out our HydroBoost systems. Power boosters will not clear factory power steering pumps/generators. For proper brake pedal effort, Danchuk recommends at least an 8" booster on Disc/Drum or Disc/Disc brake systems. 9" booster will not clear big blocks and may interfere with some small block tall valve covers. Please check clearance before ordering.1955-57 Drum/Drum, 9" Single Diaphragm, Single Reservoir Unit ................................ #2095 ............$374.95/kit1955-57 Drum/Drum, 7" Single Diaphragm, SingleReservoir Unit ................................ #2095A .........$374.95/kit1955-57 Drum/Drum, 9" Single Diaph. Dual Reservoir......................................................... #2096 ............$374.95/kit1955-57 Drum/Drum, 7" Single Diaph. Dual Reservoir ........................................................ #2096A .........$374.95/kit1955-57 Disc/Drum, 7" Single Diaphragm, w/ PropValve......................................................... #2097A ........ $419.95/kit1955-57 Disc/Disc, 9" Dual Diaphragm w/ Prop Valve......................................................... #2098 ........... $419.95/kit1955-57 Disc/Disc, 7" Single Diaphragm w/ Prop Valve......................................................... #2098A ........ $419.95/kit1955-57 Disc/Drum, 8" Dual Diaphragm w/Prop Valve......................................................... #12064 ......... $419.95/kit1955-57 Disc/Disc, 8" Dual Diaphragm w/Prop Valve........................................................... #12157 .......... $419.95/kit1955-57 Disc/Drum, 7" Dual Diaphragm......................................................... #15268 ......... $299.95/kit1955-57 Disc/Disc, 7" Dual Diaphragm......................................................... #15269 ......... $299.95/kit

#16645

OFFSET POWER BRAKE CONVERSION BOOSTER KITSMoves booster 2" to the left and 1.75" up for clearance.1955-57 Disc/Drum......................... #14975 ......... $375.95/kit1955-57 Disc/Disc .......................... #14976 ......... $375.95/kit

OFFSET POWER BRAKE BOOSTER BRACKETThis bracket moves the booster 2" to the left and 1-3/4" up for additional clearance.1955-57 ........................................... #15272 .........$149.95/ea.

RESIDUAL PRESSURECHECK VALVESWhen upgrading your stock drum brake system to disc brakes a proportioning valve is needed to ensure proper amount of pres-sure going to the front and rear wheels. A residual check valve is sometimes needed when using an adjustable prop valve.All 2-lb, Blue ...... #17570 ...... $13.95/pr.All 2-lb, Chrome #17571 ...... $22.95/pr.All 10-lb, Red ..... #17572 ...... $13.95/pr.All 10-lb, Chrome

........................ #17573 ...... $22.95/pr.

BR

AK

E BO

OSTER

SB

RA

KE

CO

NV

ERSI

ON

TCI ROLL STOP KITTCI’s Roll Stop allows you to do a burnout like the professionals. Simply pump the brake pedal, apply the roll stop and re-lease the brake pedal. The roll stop keeps the front brakes applied. Kit includes the solenoid, microswitch, mounting bracket, fuse connector and mounting hardware. Brake line modification required.All ....................... #13046 .....$114.95/kit


Brak

es Brakes

Brakes

MA

STER C

YLIN

DER

BRAKE MASTER CYLINDERASSEMBLYThis unit is factory fresh, not just another rebuild! For standard brakes. Some brake line modification necessary.1955-57 .............. #023 ......... $62.95/set

MASTER CYLINDERS WITHBUILT-IN ADjUSTABLEPROPORTIONING VALVESFeaturing a double adjustable proportioning valve, removable metering valve, stop light control, larger fluid capacity, and smaller size, this unit solves the problems associated with trying to plumb together four or five separate pieces. This is a master cylinder, proportioning valve, metering valve and stop light all in one package. Each contains two circuits, a front and rear. The front circuit contains the metering valve which is required on cars that have disc brakes on the front wheels and drum brakes on the rear wheels. The rear contains the adjust-able proportioning valve and the maximum rear pressure adjustment. The adjustable proportioning valve controls the balance of pressure between the front and rear brakes.All Chrome, 1" Bore ...............................................................#13200 ....$179.95/ea.All Chrome, 1-1/8" Bore .........................................................#15370 .....$199.95/ea.

MASTER CYLINDER DISC BRAKE CONVERSION -POWER/NON-POWERFor 2 or 4-wheel disc brake conversions only. Be sure to order the correct propor-tioning valve (#2521A or #2521B) for your application. Includes piston bore depth adapter, will work with both power and non-power brake systems.1955-57 .............. #10252 ...... $52.95/kit

CAST ALUMINUM/CHROME PLATEDMASTER CYLINDERSThese cast aluminum/chrome plated master cylinders are an easy upgrade to any power or manual disc brake conversion and includes chrome plated valve and bracket.All w/ Disc/Drum Valve, 1" Bore, Alum-Chrome Plated.......#15371 .... $259.95/ea.All w/ Disc/Disc Valve, 1" Bore, Alum-Chrome Plated ........#15372 .... $259.95/ea.All w/ Disc/Drum Valve, 1-1/8" Bore ......................................#15373 .... $259.95/ea.All w/ Disc/Disc Valve, 1-1/8" Bore .......................................#15374 .... $259.95/ea.

ALUMINUM BRAKE MASTER CYLINDERS, CHROME PLATEDWorks with 2 or 4-wheel disc brake ap-plications, power or non-power.All 1" Bore ......... #14977 ....$148.95/ea.All 1-1/8" Bore ... #14978 ....$148.95/ea.

DUAL RESERVOIR DRUM BRAKE MASTER CYLINDERThis dual reservoir drum/drum master cylinder allows you to add safety by splitting the the brake system front to rear. Works with manual brakes or with boosters with a long push rod pin. Mounts to firewall using only 2 of the original 4 mounting studs. You must supply additional brake lines. 1955-57 ...................................................................................#16360 ...... $69.95/ea.

MA

STER

CY

LIN

DER

FRAME MOUNT BRAKE PEDAL/MASTER CYLINDER BRACKETClean up your firewall with this frame mounted pedal and booster/master cylin-der bracket. This kit bolts under the floor, but is tucked up high so it won’t cause ground clearance problems. Kit includes: brake pedal assembly and frame bracket. 7" booster/master/prop valve sold separately. 1955-57 .............. #17209 ....$199.95/ea.

CHROME ALUMINUM DISC BRAKE MASTER CYLINDERSAll 1" Bore ...............................................................................#17149 ...... $85.95/ea.All 1-1/8" Bore .........................................................................#17150 ...... $85.95/ea.

BRAKE MASTER CYLINDER COVER1955-57 .............. #1953 ........ $11.95/ea.

BRAKE BLEEDING SYRINGEThis tool helps speed up the master cyl-inder bench bleeding process. Just insert the tip in the bottom reservoir ports. Fills the piston bore with clean fluid while push-ing out unwanted air. Bench bleeding the master cylinder is required when installing an new master cylinder.All ....................... #16940 ........$4.95/ea.

MASTER CYLINDER COVERSAnother chrome favorite for the custom engine compartment! See page 301 for match-ing steering box covers, and page 215 for matching ballast resistor covers. For stock master cylinders. Made in the USA.1955-57 Louvered ..................................................................#2523 ......$109.95/ea.1955-57 Plain ..........................................................................#2522 ......$109.95/ea.

BILLETMASTER CLYINDER COVERSAll Chromed ...... #14984 ......$99.95/ea.All Brushed ....... #14985 ......$79.95/ea.

#2522

#2523

Join our Email ListFor Latest Specials & News


Brak

es Brakes

Brakes

RO

TOR

S & SH

OES

CROSS-DRILLED, SLOTTED REPLACEMENT ROTORSParts #16325 and #16326 are replacement rotors for our front BIG BRAKE disc brake conversion kits. And the #16327 and #16328 are replacement upgraded rotor for our minimum offset disc brake conversion kits.All Big Brake Kits, Right Hand .............................................#16325 ...... $99.95/ea. All Big Brake Kits, Left Hand ...............................................#16326 ...... $99.95/ea.All Minimum Offset, Right Hand ...........................................#16327 ..... $89.95/ea. All Minimum Offset, Left Hand ..............................................#16328 ..... $89.95/ea.

REPLACEMENT ROTOR FOR MINIMUM OFFSET KITReplacement rotor for our minimum offset disc brake conversion kits. All Plain, Replacement

........................ #16329 ......$55.95/ea.

FRONT DISC BRAKEMETRIC PADSThese premium replacement front pads fit our #2700, #2703 as well as the minimum offset disc brake conversions.1955-57 Premium, 1-Axle,Semi Metallic Upgrade (Shown)

........................ #12322 ..... $42.95/set1955-57 1-Axle ... #12323 ..... $22.95/set

BRAKE SHOESEven brake shoes can be a difficult item to find for a 50+ year old car, but we continue to supply these very necessary top-quality brake parts.1951-58 Front Axle

........................ #021 ......... $38.95/set1951-58 Rear Axle (Shown)

........................ #020 ......... $59.95/set

BRAKE WHEEL CYLINDERS1955-57 Front, Driver

........................ #024 ..........$44.95/ea.1955-57 Front, Passenger

........................ #025 ..........$44.95/ea.1955-57 Rear, Driver

........................ #026 ..........$15.95/ea.1955-57 Rear, Passenger

........................ #027 ..........$15.95/ea.

WHEEL CYLINDER FRENCH LOCKWASHER1955-64 Front Only

........................ #11228 ........ $1.50/ea.

BRAKE SHOE RETURN SPRINGSContains four springs, a one axle set.1955-57 .............. #156 ........... $9.95/set

#16326 #16327

MA

STER

REL

ATE

D

BRAKE MASTER CYLINDER HARDWARE SET This hardware set fits original brake mas-ter cylinders. Replacement brake master cylinder assembly and other related parts are shown on this and the previous page.1955-58 .............. #2196 ....... $25.95/set

MASTER CYLINDERTO FIREWALL GASKETThis fibrous gasket includes perforations that allow it to be installed onto the mas-ter cylinder before the master cylinder is installed into the firewall.1957 .................... #1837 ..........$2.75/ea.

MASTER CYLINDERAND POWER UNIT COPPER WASHERS1955-57 .............. #1838 ..........$3.50/ea.

BRAKE MASTER CYLINDERGASKETSOur kit contains all the gaskets that you need to mount your master cylinder. For standard brakes only.1955-57 (Shown) #1203 ...........$7.95/kit1955-57 Cap Gasket Only............................ #1202 .......... $2.75/kit

MASTER CYLINDER CAPS1957 Numbered . #14701 ...... $27.95/ea. 1957 Un-Numbered

........................ #14702 ...... $27.95/ea.

MASTER CYLINDERADAPTER FITTINGSMade to adapt 1/2-20 to 3/16 inverted flare and 9/16-18 to 3/16 inverted flare.All ....................... #14979 ...... $19.95/pr.

DANCHUK GIFT CREDITHere’s the ideal solution, Danchuk gift credit! With thousands of items to choose from, you can be sure that your special someone will find exactly what they want. Call for details!

THE WORLD’S LARGEST MANUFACTURER OF 1955-56-57 CHEVROLET RESTORATION PARTS

A GIFT FOR YOUA gift credit has been purchased for

you to be redeemed for any parts and accesories available at Danchuk

Manufacturing, the World’s Largest Manufacturer of 1955-56-57 Chevrolet

Restoration Parts.

TO:

FROM:

AMOUNT: $

ACCOUNT#: RECEIPT#

This announcement has no monetary value. The dollar amount purchased on your behalf has been placed as a credit on the account number above. Simply reference the account number when placing your order. Thank you and Happy Restoring!

BRAKE SHOE GUIDE PLATEGoes on the return spring anchor pin.1955-57 .............. #16838 ........$5.50/ea.

MASTERCYLINDERADAPTER FITTINGSConverts your 3/8-24 fitting master cylin-der to GM’s 1/2-20 and 9/16-18 lines.All ....................... #17153 ...... $16.95/pr.

1-STOP SHOP FOR EVERYTHING 55-56-57 CHEVYYour for exclusive news, specials and photos!

LIKE USON FACEBOOK!

Post pictures of your car on our Facebook page for a chance to be featured in Danchuk media!




Brak

es Brakes

Brakes

BR

AK

E HA

RD

WA

RE

BRAKE HOLD DOWN KITAll the springs and hardware needed to complete an axle set.1955-57 ...................................................................................#158 ............ $8.95/set

BRASS BRAKE jUNCTION BLOCKSAfter 50 plus years, those brass threads in the original junction blocks are worn pretty thin, and it only takes once to strip’em for good. Now you can replace the originals with reproductions that are 100% correct!1955-57 Rear, ’53-62 Vette, Rear ............................................#1506 ........ $34.95/ea.1955 Front, Driver ...................................................................#1507 ........ $34.95/ea.1955 Front, Passenger (Not Shown) .....................................#1508 ........ $34.95/ea.1956-57 Front, Driver (Not Shown) .......................................#1509 ........ $34.95/ea.1956-57 Front, Passenger ......................................................#1510 ........ $34.95/ea.

BRAKE HARDWARE KITSIf you’re rebuilding your brakes, these com-plete kits contain the hardware you need to do the job right. Kits include hold-down springs, adjusters, return springs, and all the related hardware to get those brakes working correctly. 1951-58 Front & Rear

........................ #1512 ........ $59.95/kit1951-58 Front ..... #1512A ..... $30.95/kit1951-58 Rear ...... #1512B ..... $30.95/kit

SELF ADjUSTING BRAKEHARDWARE KITSUpdate your brake hardware to this time saving self adjusting kit. 1 kit per axle required, some drilling may be required.1955-57 Front ..... #12249 .......$47.95/kit1955-57 Rear ...... #12250 ...... $49.95/kit

BRAKE ADjUSTING SCREWSold separately. 4 needed per car.1955-57 .............. #159 ..........$12.95/ea.

BRAKE ADjUSTING SCREW SPRINGSIncludes two springs, a one axle set.1955-57 .............. #157 ........... $6.95/set

#1506 #1507BR

AK

E VA

CU

UM

TREADLE-VAC PLUNGER ROD SHOULDER BOLT1955-57 .............. #13528 ......$22.95/ea.

TREADLE-VACVACUUM HOSE KITS1955 .................... #13529 ...... $28.95/kit1956-57 .............. #13530 ...... $28.95/kit

POWER BRAKEVACUUM HOSE CLAMPSDon’t settle for modern screw clamps. These spring clamps are the authentic originals.1955-57 .............. #033 ........... $3.95/set

VACUUM PUMP KITCars with big cams often do not produce the vacuum required to operate a power brake booster. It is internally regulated to turn on automatically when the vacuum dips below 15" and shuts off once it reaches 25". Kit includes vacuum pump, vacuum hose, wiring plug and mounting hardware.1955-72 ...................................................................................#12272 ..... $329.95/kit

SPEED BLEEDERSSpeed bleeder makes bleed-ing your brakes easier than ever. Simply replace your original bleeder valves with a one-way ball and check valve design allowing old air and fluid out, then closing between pumps to prevent air from re-entering the system.All 3/8" x 24 ....... #14500 ...... $15.95/pr.All 10 mm x 1.5 .. #14501 ...... $15.95/pr.

NICKEL PLATED POWER BRAKE VACUUM CANISTERSOriginal design is to be used with a Treadle-Vac power brake unit.1955-56 .............. #618 ........$124.95/ea.1957 (Shown)..... #619 ........$124.95/ea.

EASTWOOD BRAKE BLEEDER KITThe Eastwood Brake Bleeder lets one per-son successfully bleed brakes at the wheel, without depressing the pedal or wasting fluid. This versatile little pump develops vacuum in your caliper and brake line to pull out air, old fluid, and dirt. By simply switching a hose connection, the pump is able to produce pressure for completing testing that requires positive pressure.All ....................... #16946 ...... $29.95/kit

STOP LIGHT SWITCHKeep your car safe by maintaining those old lamps and switches. With this qual-ity reproduction installed you’ll be sure the guy behind you knows when you’re stopping.1955-57 .............. #116 ..........$19.95/ea.

POWER BRAKE HOSE BRACKET 1955-57 .............. #1161 ........$13.95/ea.


Brak

es Brakes

Brakes

BRAKE LINE SETSDon’t take chances on old, bent brake lines. Our brake lines are reproduced with the original contours and fittings, and include plastic end caps to keep the lines free of moisture and dust until you are ready to install them. Separate front brake line sets were produced for power and non-power systems. Rear brake line sets are common to both systems. Designed for original front and rear drum brakes.1955 Front Set w/out Power ..................................................#1464 ........ $55.95/set1955 Front Set w/ Original Factory Power ...........................#1465 ........ $55.95/set1956-57 Front Set w/out Power .............................................#1466 ........ $55.95/set1956-57 Front Set w/ Original Factory Power (Shown) .......... #1467 ......... $55.95/set1955-57 Rear Set (Shown) .....................................................#1468 .........$27.95/set1955 From Master Cyl. w/ Original Factory Power ..............#1469 .........$15.95/ea.1956-57 From Master Cyl. w/ Original Factory Power (Shown).................................................................................................#1470 .........$15.95/ea.1955 6 Cyl., V8 2BC, Inside Frame, Long .............................#1471 ........ $34.95/ea.1955 V8 4BC, Outside Frame, Long ......................................#1472 ........ $36.95/ea.1956-57 6 Cyl., V8 2BC, Inside Frame, Long ........................#1473 ........ $36.95/ea.1956-57 V8 4BC, Outside Frame, Long .................................#1474 ........ $36.95/ea.

FRONT TO REAR BRAKE LINES/DISC BRAKE CONVERSIONSThese kits, available in steel or stainless, cover your braking system from the propor-tioning valve on your power brake booster to the rear flexible hose and everywhere in between. Front to rear line runs outside the frame.1955-57 Steel ..........................................................................#10122 .... $124.95/set1955-57 Stainless ...................................................................#10123 .....$167.95/set

Front Brake Line Assembly

To Reservior

To Rear Brakes

To Passenger SideFront Brake

To Driver SideFront Brake

BR

AK

E LINES

FRONT BRAKE LINE CLIP SET1955 .................... #1505 ......... $4.50/set

BRAKE LINE BRACKET1955-57 4BC, Dual 4BC, Fuel Injection

........................ #1513 ........$33.95/ea.

BRAKE LINE AND ExHAUST BRACKET TO FRAME BOLTSRemoving undercarriage bolts exposed to the elements can be a difficult task, and they rarely go back. Solve your problems with new reproductions.1955-64 .............. #1484 ......... $9.95/set

BRAKE LINE CLIP1955-57 Master Cyl. to Firewall

........................ #11227 ........$4.95/ea.

BR

AK

E D

RU

M

BRAKE DRUM1951-58 ............... #030 ..........$49.95/ea.

ORIGINAL STYLE METAL BRAKE DRUM HOLE COVERS1955-57 .............. #1511 ......... $4.95/set

BRAKE DRUM SPRING This handy little item absorbs resonance that would otherwise be transferred back into the car. Replace this spring when rebuilding the brakes. For use with stock type drums with grooves only.1955-57 .............. #1503 ........ $11.95/ea.

RUBBER BRAKE HOLEADjUSTMENT PLUGReplacement. Four needed per car. 1938-75 .............. #1153 ..........$2.95/ea.

BRAKE PEDAL RETURN SPRING It is no secret that metal fatigues, and springs get soft over time. Even if your return spring isn’t bro-ken, it may not have the snap it should. Replacing that worn spring is the finishing touch for a brake overhaul. Not for use with treadle vac power brake units.1955-58 .............. #1883 .......... $7.95/ea.

BRAKE PEDAL CROSS SHAFT NYLON BUSHING Use our brake pedal cross shaft nylon bushing to ensure a smooth feel when you step on the brake pedal. If your bushing is damaged or missing, your brake pedal assembly will wobble. This bushing is in-stalled into the brake pedal sleeve on the pedal assembly located under the dash. Two required per car. 1955-57 .............. #2084 ..........$4.95/ea.

CROSS-DRILLED BRAKE DRUM1951-58 Front or Rear

........................ #12821 ....$159.95/ea.

ADjUSTABLE BRAKE PEDAL PUSH ROD KITKit includes enough parts for 10 common pushrod configurations and works with power and non-power applications.All ............................................................................................#15059 ...... $62.95/ea.

Close-Up

RUBBERIzED CLAMP KITUsed for securing wiring harnesses or fuel lines. 1/2" ID, full circle with a 5/16" mounting hole. 10 pieces.All ....................... #12350 ........ $5.95/kit

MASTER CYLINDER TOjUNCTION BLOCK BRAKE LINES, NON-POWERThis is the brake line that runs from the master cylinder down to the junction block on the driver side. Often this line is dam-aged when servicing the master cylinder. These will work on any model classic Chevy with a non-power master cylinder.1955 .................... #16259 ......$16.95/ea.1956-57 .............. #16260 ......$16.95/ea.



Wheels

348

Brak

es

Brakes

EMER

GEN

CY

EMERGENCYBRAKECABLE BOOTSFor use with our #293 brake cable shown above.1951-58 (& ’51-57 Truck)

........................ #1928 ...........$7.95/pr.

EMERGENCYBRAKEROLLER BOLTSUse these special machined shoulder bolts in conjunction with our cable rollers to restore your emergency brake system.1955-58 & 55-59 Truck

........................ #1591 .......... $4.95/pr.EMERGENCY BRAKEIDLER LEVERSThese levers connect the front and rear emergency brake cable.1955-58 exc. Convertible

........................ #1592 ........ $17.95/ea. 1955-57 Convertible

........................ #1593 ........ $17.95/ea.

EMERGENCY BRAKE CLEVISIncludes clevis, pin, and cotter key. Goes on the end of the cable coming from the emergency brake cable and hooks onto the idler lever, parts #1592 and #1593, shown at right. 1955-57 .............. #1594 ....... $16.95/set

EMERGENCY BRAKE ROLLERS Molded nylon rollers to replace those worn or broken originals. Be sure to order #1591 bolts, shown below.1955-58 & 55-59 Truck

........................ #1590 .......... $9.95/pr.

EMERGENCY BRAKE CABLES This is the last emergency brake cable you should ever have to buy. Part #293 does not include cable boots, see part #1928 below.Made in the USA*.1955-57 Front, Best ................................................................#795* ........ $39.95/ea.1955-57 Front, Good ..............................................................#16789 .......$16.95/ea.1955-57 Front Convertible .....................................................#795A* ..... $36.95/ea.1955-57 Rear (Shown) ...........................................................#293* ......... $67.95/ea.

EMERGENCY BRAKEADjUSTMENT RODS1955-57 exc. Convertible (Shown)

........................ #1570 ........$42.95/ea.1955-57 Convertible

........................ #1571 ........ $47.95/ea.

EMERGENCY BRAKECABLE CLIPS1955-57 .............. #1504 ......... $8.95/set

EMERGENCY BRAKE CABLE KITSLokar’s brake cable kits make it easy to fabricate brake cables when installing non-original rear ends or brake kits. Be sure to order the needed clevis’, parts #14821-23.All Rear, Universal, Black (Shown)

........................ #14819 .... $154.95/kit All Rear, Universal, Stainless

........................ #14820 .... $214.95/kit

LOKAR EMERGENCY BRAKE CABLE CLEVISAll Willwood/88-up Vette Rear Brakes

........................ #14821 ...... $28.95/pr.All 84-87 Vette Rear Brakes

........................ #14822 .......$37.95/pr.All Ford Explorer Rear Brakes

........................ #14823 .......$37.95/pr.

EMERGENCY BRAKE ROLLERSIncludes 2 rollers, bolts, washers and nuts.1955-57 Metal .... #15515 ..... $15.95/set

HO

SES

PLATED EMERGENCYBRAKE BRACKET SCREWS1955-57 .............. #2892 .......... $5.95/pr.

BRAKE HOSESThe only difference from the original is the octagonal hose ends. Each car requires two front hoses and one rear hose. 1955-57 Front exc. Disc

........................ #028 ..........$19.95/ea.1955-57 Rear ...... #029 ..........$24.95/ea.

REPLACEMENT REARDISC BRAKE HOSESReplacement hose kits for rear disc conversion kits, rubber or stainless. All 16", Rubber w/10mm Banjo Bolt,

........................ #16362 ..... $49.95/kitAll 11", Stainless w/10mm Banjo Bolt

........................ #16361 ...... $72.95/kit

RUBBER FRONT DISCBRAKE HOSE KITSReplacement rubber hose kit for front disc conversion kits.All 16" w/ 10MM Banjo Bolt

........................ #16363 ......$49.95/ea.All 16" w/ 7/16" Banjo Bolt

........................ #16365 ...... $49.95/kit

REAR DISC BRAKECONVERSION BRAKE HOSEUse with late model 10-12 bolt rear end conversions.1955-57 10-12 Bolt Axle

........................ #14309 ...... $41.95/ea.

BRAKE HOSE-TO-MOUNTING BRACKET CLIPS Set of four.1955-57 .............. #019 ........... $8.95/set

BRAIDED STAINLESSFRONT DISC BRAKE HOSESBraided stainless hoses give you a firmer pedal feel. Upgrade you disc brakes today with this set.All 16" with 10mm Banjo Bolts

........................ #15233 ..... $69.95/setAll 16" with 7/16" Banjo Bolt

........................ #16364 ...... $60.95/kit

EMERGENCY BRAKE LINKAGE RETURN SPRINGSIs your spring sprung? Though it may still operate, a worn out spring cannot deliver the tension it was designed to. You’ll be surprised how much snap a new return spring has!1955-57 exc. Convertible

........................ #1486 .......... $7.95/ea.1955-57 Convertible

........................ #1487 .......... $7.95/ea.

PARKING BRAKE ASSEMBLIESReplace your missing or damaged park-ing brake handle assembly with these accurate reproductions. Each assembly comes completely assembled and also includes mounting bracket with both rollers and is ready to paint and/or install. Parking brake handle is made of steel instead of the original plastic.1955-56 .............. #14200 .....$119.95/kit1957 .................... #14201 .....$119.95/kit

STAINLESS CENTERREAR BRAKE HOSENow available, this rear universal style braided stainless rear brake hose replaces the factory center rear rubber hose. When replacing brake hoses or upgrading them to braided stainless, don’t forget this vital hose to ensure a safe braking system with a firmer pedal.1955-57 .............. #16942 ......$54.95/ea.

PARKING BRAKE SPREADER BARThe parking brake spreader installs on the rear drum brakes between the brake shoes. It is often missing or left out over the years.1955-57 .............. #16833 ........ $7.95/ea.

BRAKE LINE FRAME CLIPS1955-57 Inside Frame

........................ #1007 ....... $25.95/set1955-57 Outside Frame w/ Power Pack

(Shown) ......... #1008 ....... $28.95/set

EMERGENCY BRAKE SHOE LEVERKit includes brake shoe levers, shoe spreader bars and hardware. 1 kit does both sides.1955-57 .............. #17638 ...... $44.95/kit


Whee

ls Wheels

Wheels

WH

EELS & R

ELATED

RALLY WHEELS The rally wheel first appeared in 1968, but it wasn’t long before this design became popular among 1955, 1956 and 1957 owners as well. Wheels can be painted to match the color of your car, or even chrome plated. We offer this wheel painted the factory argent silver. 14" x 7" .............. #4464 ........$98.95/ea.15" x 7" .............. #17645 ....$105.95/ea.15" x 8" .............. #4465 ........$99.95/ea.

WHEELS FOR USEWITH DISC BRAKESAccepts full wheel covers and clears disc brakes. Features Chevy and Ford bolt patterns. Hub caps MUST be fitted prior to painting.1955-56 15" x 5" #12146 ....$109.95/ea.1957 14" x 5" .... #12147 ....$109.95/ea.1957 14" x 6", Replacement

........................ #12148 ....$109.95/ea.

TIR

ES &

REL

ATE

D

B.F. GOODRICH TIRESIf you don’t own a set of these beautiful tires, you are missing out. These genuine B.F. Goodrich whitewall tires are the most original and highest quality we can offer. Next time you need new tires or are just looking to upgrade, you can’t go wrong with these babies.1955-56 6:70 x 15, 2-1/2" White Wall

........................ #740 ........$199.95/ea.1957 7:50 x 14, 2-1/4" White Wall

........................ #741 ........$199.95/ea.

B.F. GOODRICH SILVERTOWN WHITEWALL RADIAL TIRESIf it’s a classic look with a great ride you’re after then these radials are your answer. The beautiful white walls will class-up your classic and compliment your show car. Just like your modern day car these radi-als feel like heaven on the pavement. The 1955-56 application is sized 205/75R15 and replaces the 6:70-15. The 1957 ap-plication is sized 205/75R14 and replaces the 7:50-14.1955-56 .............. #872 ........$299.95/ea.1957 .................... #873 ........$299.95/ea.

FRONT WHEEL BEARINGSAND OIL SEALSSold individually.Outer Bearing

1955 ............... #001A .......$85.95/ea.1956-57 .......... #001 ..........$59.95/ea.

Inner Bearing1955-57 .......... #002 ..........$89.95/ea.1955-57 Oil Seal, Front Wheel ........................ #003 ..........$18.95/ea.

REAR WHEEL BEARINGSWheel bearings are sold individually.1955-56 .............. #004 ..........$89.95/ea.1957 (Shown)..... #005 ..........$89.95/ea.

WHEEL LUG STUDSold individually; five required per wheel.1955-57 .............. #154 ............$2.95/ea.

WHEEL LUG NUT Five lug nuts required per wheel. 1955-57 7/16-20 #155 ............$2.50/ea.

SHOW QUALITYGREASE HUB CAPS 1955 .................... #2185 ........ $24.95/pr.

GREASEHUB CAPReplace those old, dented caps with this original design part.1956-57 .............. #031 ..........$12.95/ea.

WHEEL SPINNER ASSEMBLYThis complete kit includes four of our beau-tifully triple chrome-plated wheel spinners, crest emblems and mounting hardware. The spinner assembly is designed to fit 1957-58 Bel Air full size wheel covers. We’ve also seen these spinners modified to fit other wheel covers. More than just a flashy detail, this spinner assembly is a guaranteed head-turning show-stopper! Made in the United States of America.1957-58 ............... #578 ....... $178.95/set1957-58 Spinner Emblems Only

........................ #297 ......... $49.95/set

ROLLER BEARING CONVERSION KITWe just finished brand new tooling for these parts and are very proud of them. This conversion kit eliminates the old ball bearings and replaces them with modern roller bearings. Though this is an excellent way to modernize stock wheel applications, it’s an absolute must-have for those with custom, non-original wheels. Old-style ball bear-ings can’t withstand the side loads that custom width wheels transmit to the bearing. You can use your stock brake drums and will not notice any changes in front end alignment. Kit comes complete with new hubs, studs, inner bearings, outer bearings, races, grease seals, hub caps, and spindle nut washers. Easy to install.1955-57 Front .........................................................................#138 ......... $219.95/kit

STAINLESS RALLY WHEELTRIM RINGS14" x 7" .............. #17642 ......$35.95/ea.15" x 7" .............. #17643 ......$35.95/ea.15" x 8" .............. #17644 ......$35.95/ea.

RALLY WHEEL CENTER CAP'55 STYLEAll ...................... #17649 ...... $37.95/ea.

RALLY WHEELCENTER FLAT CAPAll Stainless ...... #17647 ...... $24.95/ea

RALLY WHEELCENTER DERBY CAPAll Stainless ...... #17648 ......$49.95/ea.

RALLY WHEELPOLICE CAP WITH BOW TIEAll Stainless ...... #17646 ......$35.95/ea.


Brak

es Brakes

Brakes

SHO

WW

HEELS

HU

B C

APS

SHOWWHEELSSTREETER WHEELSShowWheels Streeters, with their beautiful deep-machined lips, are some of the best looking and fitting rims around. They clear most brake upgrades and are available with the traditional polished center or the new gray or blacked painted center. 4.75" backspacing is available for #16205, #16207, #16209 and #16211 by special order. Includes chrome lug nuts and center caps..

These sizes have a 4.25" backspacing. All 17 x 7, Gray with Center Cap and Lug Nuts....................#16204 .....$169.95/ea.All 17 x 7, Polished with Center Cap and Lug Nuts .............#16208 .....$189.95/ea.All 18 x 7, Gray with Center Cap and Lug Nuts....................#16206 .....$189.95/ea.All 18 x 7, Polished with Center Caps and Lug Nuts ...........#16210 .... $209.95/ea.

These sizes have a 4.5" backspacing. All 17 x 8, Gray with Center Cap and Lug Nuts ...................#16205 .....$169.95/ea.All 17 x 8, Polished with Center Cap and Lug Nuts ............#16209 .....$189.95/ea.All 18 x 8, Gray with Center Cap and Lug Nuts ...................#16207 .....$189.95/ea.All 18 x 8, Polished with Center Caps and Lug Nuts ..........#16211 .... $209.95/ea.

These sizes have a 5.25" backspacing. All 18 x 9, Gray .......................................................................#16371 ... $209.95/ea. All 20 x 8.5, Gray ....................................................................#16372 .... $229.95/ea. All 18 x 9, Polished ................................................................#16368 .... $229.95/ea. All 20 x 8.5, Polished .............................................................#16369 .... $249.95/ea.

These sizes have a 5.5" backspacing and includes chrome lug nuts and center cap. All Polished, 20 x 10 ..............................................................#16370 .... $269.95/ea. All Gray, 20 x 10......................................................................#16373 .... $249.95/ea.

CHROME WHEELINSTALLATION KIT4 valve stems and lug nuts.All 7/16", Acorn . #13047 ...... $39.95/kit

SHOWWHEELS BLACK WITHMACHINE LIP STREETER WHEELSAll 17 X 7 ............ #17262 ....$169.95/ea.All 17 X 8 ............ #17263 ....$169.95/ea.All 18 X 7 ............ #17264 ....$189.95/ea.All 18 X 8 ............ #17265 ....$189.95/ea.All 18 X 9 ............ #17266 ....$209.95/ea.All 20 X 8.5 ......... #17267 ....$229.95/ea.All 20 X10 ........... #17268 ....$249.95/ea.

WIRE WHEEL COVERAdd some sparkle to your car with these stylish, stainless steel wire wheel covers. 1956 .................... #2086 ......$155.95/ea.

SMALL WHEEL COVERSThese gems are available once again. Can-not be used with replacement steel wheels, parts #12146-#12148 Sold separately.1955 150/210 ...... #1136 ........$84.95/ea.1956 150/210 ...... #1137 ........$84.95/ea.1957 w/o Crest, 150/210

........................ #15561 ......$54.95/ea.

REPLACEMENT WHEEL COVERSThese replacement wheel covers fit and look like the originals, except for the center crest. They are chrome over stainless and fit original style wheels. 1955 Bel Air .................................................................................................................. #1128..................................... $134.95/ea.1956 Bel Air, Full .......................................................................................................... #15559 .................................. $134.95/ea. 1957 Bel Air, Full w/o Crest ......................................................................................... #15560 .................................. $124.95/ea.

WIRE WHEELHUBCAP RETAINER CLIPS1956 1-Wheel ..... #15686 ..... $24.95/set1956 4-Wheel ..... #15687 .... $84.95/set

BEL AIR HUB CAP DECALSIf you’re sporting polished stainless steel hubcaps, you need these. Easier to apply than paint, our hubcap decals are essential to the well-detailed auto. Each decal sheet is made of quality adhesive-backed vinyl. One sheet needed per hubcap. Made in the USA.1955 White ......... #963 ..........$10.95/ea.1956 Black (Shown)

........................ #964 ............$9.95/ea.1957 Black ......... #610 ............$8.95/ea.

CHROME WHEEL LOCK SETAll 7/16" ............. #13048 ..... $29.95/set

CHROME LUG NUTAll 7/16", Acorn . #13049 ........ $1.95/ea.

354

Brak

es

Brakes

AMERICAN RACINGTORQ-THRUST II SHORTCENTER CAP Caps fit Torq Thrust, Salt Flat and Hop-ster rims.All ....................... #13052 ...... $47.95/ea.

AMERICAN RACINGOAKLAND TORQ-THRUSTCENTER CAPSCaps fit Torq Thrust, Salt Flat and Hop-ster rims.All ....................... #13053 ... $364.95/set

AMERICAN RACING T.T.O. RIMAll 15" x 7" ......... #13054 ....$259.95/ea.

#10220#10219

TORQ-THRUST RIMSIf these don’t bring back memories of “Hot Rodding” in the 60’s and 70’s we don’t know what will. These American-made Torq-Thrust rims are top quality replicas of the originals. If you’re looking for a little extra shine, try the 2-piece polished versions. Includes standard center cap. 15" x 7" wheels have a backspacing of 3-3/4", 16" x 7" and 17" x 7" wheels have backspacing of 4" and 16" x 8" and 17" x 8" have a 4-3/4" backspacing. Installation kit sold separately.All “D”, 15" x 7", Gray ................................................................................................... #10219 .................................. $214.95/ea.All “D”, 15" x 7", Chrome .............................................................................................. #13055 .................................. $299.95/ea.All II, 15" x 7", Polished ............................................................................................... #10220 ...................................$247.00/ea.All II, 16" x 7", Polished ............................................................................................... #13056 .................................. $236.95/ea.All II, 16" x 8", Polished (Shown) ................................................................................ #13057 .................................. $266.95/ea.All 17" x 7", Polished ................................................................................................... #14567 .................................. $279.95/ea.All 17" x 8", Polished ................................................................................................... #14568 .................................. $289.95/ea.

AMERICAN RACINGHOLLOW POINT CENTER CAPSCaps fit Torq Thrust, Salt Flat and Hop-ster rims.All ....................... #13051 ... $259.95/set

AM

ERIC

AN

RA

CIN

G


brakes and wheels

Documents