bpv international renewal application

8/13/2019 BPV International Renewal Application

1/14

te l 1 .212.591.8500

fax 1 .212.591.8501

www.asme.org

Two Park Avenue

New York, NY

10016-5990 U.S.A.

INTERNATIONAL

INFORMATION AND PROCEDURES FOR RENEWAL OF BOILER AND PRESSURE VESSELCERTIFICATES OF AUTHORIZATION UNDER SECTIONS I, IV, VIII DIV. 1,

VIII DIV. 2, VIII DIV. 3, X AND XII

The application forms in this renewal notice are being brought to your attention ten months prior to the expiration date of the Certificatesbecause of the time involved in the renewal process, which must be completed before the expiration date. We request that you give thismatter your immediate attention and complete the application and submit it with the correct remittance to ASME. In order to complete therenewal process before the expiration date, or to be eligible for an extension of the expiration date, it is requested that renewal applications,fees, and review deposit, where applicable, be received by ASME at least six months [five months in the case of H (Cast Iron and/or Cast

Aluminum) and UM] prior to the expiration date. If not received by at least six months before the expiration, the Certificate may expire on theexpiration date, if the renewal process is not completed.

General Triennial Review for S, A, PP, E, M, H(other than Cast Iron and/or Cast Aluminum), HLW, U, U2, U3, RP and T Certificates

Upon submittal of the application throughCA Connectand receipt of the required review deposit and fees, a review will be conducted by anASME Designee appointed by ASME and a representative of the Applicant'sAuthorized Inspection Agency (AIA). The review is conductedby an ASME Designee appointed by ASME and a representative of the Applicant's Accredited Authorized Inspection Agency. See attachedfor the required review deposit and fees. The website contains a link forAccredited Authorized Inspection Agencies,that you may contact.

H (Cast Iron and/or Cast Aluminum) Certificates

Upon submittal of the application throughCA Connectand receipt of the review deposit and fees, a review will be conducted by an ASMEDesignee appointed by ASME.

V, HV, UV, UV3, UD, TV and TD Certificates

Upon submittal of the application through CA Connect and receipt of the Certificate fee, ASME will notify the ASME DesignatedOrganization,The National Board of Boiler and Pressure Vessel Inspectors,to appoint an ASME Designee to conduct the review.

UM Certificates (other than General Triennial Review)

Upon submittal of the application throughCA Connectand receipt of the Certificate fee, ASME will notify your AIA to review your procedureto assure compliance with Code requirements in the manufacture of vessels to which the Certification Mark is to be applied. ASME will thenawait a satisfactory report from your AIA stating that they have reviewed your procedure and find it to be acceptable.

The"Guide for ASME Review Teams for Review of Applicants for ASME Certificates of Authorization"provides a checklist of the elements ofa Quality Control System. The Applicant is required to indicate the corresponding cross references to the provisions in the Quality ControlManual which address these elements. The completed Guide must be provided by the Applicant to the ASME Review Team.

The shop review will consist of an on-site evaluation of your Quality Control System, encompassing both a review of your written descriptionand a demonstration of implementation of the program, after which the Review Team will advise you of its recommendation to ASME. TheQuality Control Manual and documentation which support understanding of the program must be in English.

A1.29-11/13 (1/4)LH
http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/https://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttp://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://www.nationalboard.org/http://www.nationalboard.org/http://www.nationalboard.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/https://www.asme.org/getmedia/fdc67bcb-f46d-48cd-b367-2746eda72e70/BPV-Checklist-Accreditation.aspxhttps://www.asme.org/getmedia/fdc67bcb-f46d-48cd-b367-2746eda72e70/BPV-Checklist-Accreditation.aspxhttps://www.asme.org/getmedia/fdc67bcb-f46d-48cd-b367-2746eda72e70/BPV-Checklist-Accreditation.aspxhttps://www.asme.org/getmedia/fdc67bcb-f46d-48cd-b367-2746eda72e70/BPV-Checklist-Accreditation.aspxhttp://caconnect.asme.org/http://www.nationalboard.org/http://caconnect.asme.org/http://caconnect.asme.org/https://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttps://www.asme.org/getmedia/3f7735f9-980d-40b6-b916-073bed0511a1/AIA-Certificate-Holders-A9-56.aspxhttp://caconnect.asme.org/


2/14

Additional Information

For V, HV, UV, UV3, UD, TV and TD Certificates, it is necessary that all required capacity certification tests be scheduled within ninetydays from the date of the review. If the tests are not successfully completed within six months from the date of the review, a new reviewmust be conducted. The website contains a link for a list ofTesting LaboratoriesHolding Certificates of Acceptance for ConductingTests of Pressure Relief Devices can be found on the ASME website.

Following receipt and evaluation of the report, ASME will advise the Applicant that the Certificates and Stamps are renewed for anothermaximum of three years [one year for UM and H (Cast Iron and/or Cast Aluminum)], or that additional requirements must be met prior tofurther consideration of the application.

ASME will provide a proforma invoice. Please log into your account inCA Connectto generate this invoice. It will include theamount of the deposit necessary in order to schedule the review, as well as Certificate fees. The advance deposit will be applied tothe cost of the review. The Applicant is responsible for all the fees and expenses incurred by the ASME Designee while en route toand from, and at the Applicants facility, and ASME administrative fees. At the conclusion or termination of the review, an invoicewill be rendered, or an Applicant may be entitled to a refund of the excess deposit. If it is preferred that the refund be doneelectronically, please provide banking particulars inCA Connect.

For V, HV, UV, UV3, UD, TV and TD Certificates, a deposit for review is not required to be sent to ASME. The National Board of Boiler

and Pressure Vessel Inspectors will advise the Applicant directly concerning the requirement for a deposit. For those Certificates, ASMEdoes, however, require that the Certificate fees be submitted to ASME with the application.

Please return the completed forms, and review deposit and fees, (fees only for Pressure Relief Device or UM Certificates) to:

ASMEAccreditation/Certi ficat ion Processing Dept.22 Law DrivePO Box 2900Fairfield, NJ 07007-2900

In addition, it is requested that all applications be emailed [email protected].

The Applicant shall pay directly to The National Board of Boiler and Pressure Vessel Inspectors (for V, HV, UV, UV3, UD, TV and TD),and Authorized Inspection Agency such charges for the qualification review as those bodies require. If the Applicant withdraws theirapplication after the remittance is received by ASME, there is an administrative fee of $500 which will be deducted from the originalremittance.

Certificate Holders have the option to request an extension to their current Certificate expiration date to complete current work. Such arequest for extension to complete work in progress must be received, by ASME, thirty days prior to the current expiration date. A checkfor $2,000 per Certificate must accompany the request. The request must contain information concerning a description of the work to becompleted and when it is scheduled for completion. A copy of the request must be sent to your Accredited Authorized Inspection

Agency. The Certificate Holder shall also request their Accredited Authorized Inspection Agency to evaluate their present activity andprovide a report to ASME. The evaluation shall include the current effectiveness of the management and quality control system relative

to what was in place and presented to the ASME Review Team at the last review. For V, HV, UV, UV3, UD, TV and TD, the NationalBoard of Boiler and Pressure Vessel Inspectors must also be informed and requested to perform the evaluation. An extension, ifgranted, will be for six months, with no further extension. The extension will only cover work listed in the request. A Certificate Holderwho voluntarily terminates a review in progress is not eligible for this type of extension of expiration date.

A1.29-11/13 (2/4)
https://www.asme.org/getmedia/91bf537f-33ce-4caa-aeeb-584acfb2813a/Testing-Laboratories-Holding-ASME-Certificates-of-Acceptance-for-Conducting-Tests-of-Pressure-Relief-Devices.aspxhttps://www.asme.org/getmedia/91bf537f-33ce-4caa-aeeb-584acfb2813a/Testing-Laboratories-Holding-ASME-Certificates-of-Acceptance-for-Conducting-Tests-of-Pressure-Relief-Devices.aspxhttps://www.asme.org/getmedia/91bf537f-33ce-4caa-aeeb-584acfb2813a/Testing-Laboratories-Holding-ASME-Certificates-of-Acceptance-for-Conducting-Tests-of-Pressure-Relief-Devices.aspxhttps://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/mailto:[email protected]:[email protected]:[email protected]:[email protected]://caconnect.asme.org/https://caconnect.asme.org/https://www.asme.org/getmedia/91bf537f-33ce-4caa-aeeb-584acfb2813a/Testing-Laboratories-Holding-ASME-Certificates-of-Acceptance-for-Conducting-Tests-of-Pressure-Relief-Devices.aspx


3/14

Abrochurelisting the various sections of theBoiler and Pressure Vessel Code and other ASME publicationsrequired for obtainingASME Certificates has been included in this renewal package. Subscription to the indicated sections of the ASME Boiler and PressureVessel Code is required for certification to assure that Code users have the latest applicable Code rules. Effective with the issuance ofthe 2007 Edition of the Boiler and Pressure Vessel Code, the electronic version, purchased from a licensed reseller is acceptable, aswell as the published version by ASME. The rules published in the Code are subject to revision from time to time. These revisions arepublished annually in addenda to the Code and become mandatory six months after the date of publication of each such addenda.

Additionally, interpretations of the rules are published in supplements to the Code. These addenda and supplements are provided to

subscribers, as part of their basic subscription, to assure their awareness of the latest rules, revisions and interpretations. Reproduceddocuments from any source are not accepted for ASME certification, as they provide no assurance of completeness or that the user willbe made aware of revisions and interpretations of the applicable Code sections.

Applicants are advised that registration of data report forms may be required by the legal authority of a state or municipality of the UnitedStates or province of Canada. Information regarding such requirements is available from the applicable legal authority or The NationalBoard of Boiler and Pressure Vessel Inspectors, 1055 Crupper Ave., Columbus, OH 43229-1108; telephone (614) 888-8320; fax (614)847-1147,[email protected]. Additionally, a Synopsis of Boiler and Pressure Vessel Laws, Rulesand Regulations in the United States and Canada is available from The National Board of Boiler and Pressure Vessel Inspectors.

If you have any questions, please contact the ASME Conformity Assessment Department via [email protected].

A1.29-11/13 (3/4)
https://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxmailto:[email protected]:[email protected]:[email protected]://www.nationalboard.org/http://www.nationalboard.org/http://www.nationalboard.org/mailto:[email protected]:[email protected]:[email protected]:[email protected]://www.nationalboard.org/mailto:[email protected]://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspxhttps://www.asme.org/getmedia/b9a565fb-1872-47d5-8008-454ad2a7eb2e/2013-BPVC-Brochure.aspx


4/14

Fees and Deposits

H (Cast Iron and/or Cast Aluminum) Certificates

Upon submittal of the application throughCA Connectand receipt of remittance of $11,000 (review deposit of $10,000 plus Certificatefee of $1,000), a review will be conducted by an ASME Designee appointed by ASME.

V, HV, UV, UV3, UD, TV and TD Certificates

Upon submittal of the application throughCA Connectand receipt of the Certificate fee of $3,000 per Certificate, ASME will notify theASME Designated Organization, the National Board of Boiler and Pressure Vessel Inspectors, to appoint an ASME Designee to conductthe review.

ASME requires an advance deposit of $10,000 for the conduct of the review plus the Certificate fee. The fee for all Certificates, except H(Cast Iron and/or Cast Aluminum), is $3,000 per Certificate. The Certificate fee for H (Cast Iron and/or Cast Aluminum) is $1,000 perCertificate.

For all Certificates:

Certificates

H (Cast Iron and/or Cast Aluminum) $1,000 per Certificate

All other types $3,000 per Certificate

If the application covers Certificates at more than one location, please add an additional $5,000 per each additional location to the reviewdeposit.

ASME will provide a Pro Forma invoice, upon receipt of a completed application or at the request of the Applicant. An invoice may also

be provided by logging into your account inCA Connect. It will include the amount of the deposit necessary in order to schedule thereview, as well as the Certificate fee. The advanced deposit will be applied to the cost of the review. The Applicant is responsible for allthe fees and expenses incurred by the ASME Designee while en route to and from, and at the Applicants facility, and ASMEadministrative fees. At the conclusion or termination of the review, an invoice will be rendered, or an Applicant may be entitled to arefund of the excess deposit. If it is preferred that the refund be done electronically, please provide banking particulars inCA Connect.

A1.29-11/13 (4/4)
http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/https://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/https://caconnect.asme.org/http://caconnect.asme.org/http://caconnect.asme.org/


5/14

A1.37-1/13 (1/2) LH Page 1 of 2

Two Park Avenue, New York, NY 10016

ASMEApplication for

Accreditat ion/Cert if ication

Company: ____________________________________________________________(Company name as it will appear on the Certificate)

Division: ____________________________________________________________(Division, department, etc., if it is to appear on the Certificate)

This application is for the following location:

Address: ____________________________________________________________(Give full address)

____________________________________________________________

____________________________________________________________City State Country Postal code

__ Plant __ New If renewal, complete the following:

__ Field Site __ Renewal Current Certificate Number(s): ___________________________________________

Expiration date: ___________________________________________

Check the Certificate(s) being applied for:

*A Assembly, boilers UV Pressure vessel safety valves, UV3 Pressure vessel safety valves,*M Miniature boilers manufacturer, Div. 1 & 2 assembler, Div. 3

*PP Pressure piping UV Pressure vessel safety valves, *RP Reinforced plastic pressure

*S Power boilers assembler, Div. 1 & 2 vessels

*E Electric boilers UD Pressure vessel rupture *T Transport tanks

V Boiler safety valves, manufacturer disk devices TV Transport tank valves,

V Boiler safety valves, assembler *UM Miniature vessels manufacturer

*H Heating boilers *U2 Pressure vessels, Div. 2 TV Transport tank valves,

H Heating boilers, cast iron *U3 Pressure vessels, Div. 3 assemblers

*HLW Lined potable water heaters UV3 Pressure vessel safety valves, TD Transport tank rupture

HV Heating boiler safety valves manufacturer, Div. 3 disk devices

*U Pressure vessels, Div. 1 PRD Laboratory or observer

Stamps ASME is switching to a Single Certification Mark. If you are renewing an existing certificate you will be asked toreturn your Code Symbol Stamp by no later than January 1, 2014. For detailed information about the switch to SingleCertification Mark please review the FAQs on New ASME Markon our website www.asme.org.

Please indicate below the number of stamps of each size you would like to receive. If you currently hold stamps you mayrequest an equal number of new certification stamps at no charge. Stamps exceeding the number you currently hold will besubject of the standard stamp fee, as will all stamps accompanying new certificate issuances

Number of Stamps Requested: _______ _________

----- Application must be signed on page 2 -----
http://www.asme.org/kb/standards/certification---accreditation/product-certification/single-certification-mark-faqhttp://www.asme.org/kb/standards/certification---accreditation/product-certification/single-certification-mark-faq


6/14

A1.37-1/13 (2/2) Page 2 of 2

* Important:If marked with an * you must complete the following:

The Authorized Inspection Agency performing our Code inspection is ___________________________________________________

Special Provisions: Please check if you wish to operate under any of the following provisions:

UG-90(c)(2), Multiple duplicate pressure vessels

HG-515.4(b), Multiple duplicate boilers

RI-160, Multiple duplicate fiber

reinforced plastic pressure vessels

TS-200.7, Multiple duplicate transport tanks

Company Abbreviation: Please indicate if the company chooses to use an abbreviation on the nameplate or in the stamping.

__ Yes __ No If yes, the abbreviation will consist of ______________________________________

Note: A Certificate Holder may use either the companys full name or the above abbreviation on the nameplate or in the stamping.The Certificate Holder must list the companys full name as listed on the ASME Certificate on the ASME Manufacturers Data Report.

Accreditation/Certification Agreement

The organization listed on the front of this Application for Accreditation/Certification (the Applicant) performs orsubcontracts the design, fabrication, production, testing, assembly, construction and/or installation of items at the addressgiven, and makes this application to The American Society of Mechanical Engineers (ASME) for the appropriateCertificate of Accreditation, Certificate of Certification, Certificate of Acceptance, or Certificate of Authorization permittinguse of the associated Certification Mark. The Applicant:

(1) Agrees to use the Certificate and/or Stamp in accordance with the applicable ASME Code or Standard governingthis application.

(2) Agrees to return the stamp and/or Certificate anytime ASME may so request, at the time the Applicantdiscontinues the work covered, or at the time of expiration, if not renewed.

(3) Accepts the conduct of announced or unannounced audits as required by the appropriate ASMEaccreditation/certification body. Access to the inspection site to conduct audits, reviews or surveys, includingtravel to and from the site, is the responsibility of the Applicant. If access is blocked or impeded, ASME is notresponsible for the Applicant failing to receive, or continue to have accreditation/certification.

(4) Agrees to indemnify and hold harmless ASME and its agents from and against any costs (including legal fees andexpenses) and any direct, indirect, incidental or consequential damages (including loss of profits or businessopportunity) arising out of any claim or cause of action in any way related to this Agreement or the subject matterhereof, including but not limited to claims based on contract, tort (including negligence), strict liability or breach ofwarranty (express or implied).

(5) Understands that the Applicants use of the ASME mark may be allowed provisionally by ASME in its discretionuntil a decision is made on an appeal of an action of an ASME subcommittee, committee or board and acceptsthe obligation to pay all legal fees and expenses and ASME's cost for recovering the Certificate and stamp if not

returned.

Legal Company Name: ________________________________________________________________

Signed: ____________________________________________Signature must be by a Company Officer or Designee

Title: ____________________________________________

Date: ____________________________________________

Caution: Please read these paragraphs carefully to make sure you wish to operateunder any o f these provisions before checking a box. Appl icants who incorrectly

check a box may have an inappropriate Team assigned to their review, which mayincrease costs and/or delay the review.


7/14

A4.7- 3/13 Page 1 of 1

Two Park Avenue, New York, NY 10016

Form D

Company: ____________________________________________________________(Company name as it will appear on the Certificate)

Division: ____________________________________________________________(Division, department, etc., if it is to appear on the Certificate)

Location (provide full address):

Contact name: _______________________________ Fax: _____________________________________

Title: _______________________________ E-mail: ______________________________________

Telephone: _______________________________ Company Website:____________________________________

Jurisdictional Authority (if applicable): _____________________________________________________________________

Authorized Inspection Agency of record (if applicable): _________________________________________________________

Recommended hotel or motel for team (provide name, full address, and telephone numbers):

Recommended airport (include city name): _________________________________________________________________

Miles from airport to lodging: _________________________ Miles from lodging to office/plant/site: ___________________

Recommended airport to lodging transfer:

___ Taxi Signed: _________________________________________ Limo___ Hotel provided limo Title: _________________________________________ Rent car___ Pickup by company Date: ______________________________________

Corporate/Mailing

______________________________

______________________________

______________________________

______________________________

Plant

________________________________

________________________________

________________________________

________________________________

Field Site

_____________________________

_____________________________

_____________________________

_____________________________

First choice

_______________________________________________

_______________________________________________

_______________________________________________

_______________________________________________

Second choice

_______________________________________________

_______________________________________________

_______________________________________________

_______________________________________________


8/14

SCHEDULING INFORMATION - RENEWALS

ASME generally schedules renewal reviews approximately two to three months prior to the current expiration dates to assurecontinuity of the Certificates. Reviews should be scheduled to be held no later than 6 weeks before expiration date to allowenough time for renewal process to be completed before expiration date. There is an average lead time to schedule reviews,from receipt of completed application and fees, of four months due to scheduled reviews of other companies. To minimize costsfor Applicants, ASME tries to schedule a series of reviews in the same area of the world. Therefore, in order for ASME to scheduleyour review, please answer the following two questions:

Question 1

What is the earliest date that you are available for a review? {Note: Renewal reviews are required to be scheduled

approximately 6 weeks prior to the current expiration date.}Four months before expiration date, or

___________________________________________

Question 2

What weeks or dates are not acceptable to you (due to Holidays, plant shutdowns, etc.) within four months of your expiration date?

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

____________________________________ _______________________________ ________________________Company Signature Date

Your review will be scheduled based on your responses and in conjunction with other companies in your area. We, therefore,

expect you to accept the dates that we assign. Lack of acceptance may result in a long delay until the next series of reviews arescheduled in your area or a substantial increase in your costs if a Team must be sent to do your review alone, and possibleexpiration of your current Certificate(s) without renewal. We cannot schedule your review until the completed application, fees andthis completed form are received. Please note that if all required material is not received six months before the expiration, or if youlimit the number of acceptable available dates, we may not be able to schedule your review in time to avoid expiration of yourcurrent Certificate(s).

ASME Conformity Assessment Department

A4.15E-1/13(1/1)

te l 1 .212.591.8500

fax 1 .212.591.8501

www.asme.org

Two Park Avenue

New York, NY

10016-5990 U.S.A.


9/14

Invoice Request FormA N I N T E R N A T I O N A L C O D E

go.asme.org/bpvc13

ASME Boiler and Pressure Vessel Code


10/14

___________________________________________________________________________

___________________________________________________________________________

___________________________________________________________________________

________________________________________________ _______ _____________

_________________________ ______________________________________________

_________________________ ______________________________________________

___________________________________________________________________________

___________________________________________________________________________

________________________________________________ _______ _____________

_________________________ ______________________________________________

_________________________ ______________________________________________

Please complete the following Invoice Request Form;and then send to:

ASME Customer Care

22 Law Drive, Box 2300

Fae NJ 07007-2300 USA

Pone: +1.800.843.2763 (to-fee), +1.973.882.1170

(Mona toug Fa, 8:00 a.m.-5:30 p.m., EST)

Fax: +1.973.882.8113 (24 ous / 7 as)

eMail: [email protected]

ASME Custome Cae ten w sen ou a Pofoma noce wt

appcae saes tax an sppng / anng cages. Oeng

information for domestic and international orders may be found below.

Pces ae suject to cange wtout notce.

ASME ACCOUNT NO. iF AvAilAblE:

SHIP TO:

COMPANy NAME:

ADDRESS:

CiTy / STATE / ZiP Or POSTAl COdE:

COUNTry: TO ThE ATTENTiON OF:

PhONE: EMAil:

BILL TO:

COMPANy NAME:

ADDRESS:

CiTy / STATE / ZiP Or POSTAl COdE:

COUNTry: TO ThE ATTENTiON OF:

PhONE: EMAil:

Invoice Request Form:


11/14

PUBLICATIONS: ORDER NO. ISBN QUANTITY LIST PRICE USD LINE TOTAL

BPVC-2013 Sections:

i, rues fo Constucton of Powe boes 600010 9780791834503 ______ $370.00 _____________

II, Materials:

ii-A, Feous Matea Speccatons (two oumes) 60002A 9780791834510 ______ $560.00 _____________

ii-b, Nonfeous Matea Speccatons 60002b 9780791834527 ______ $560.00 _____________

ii-C, Speccatons fo Weng ros, Eectoes, an Fe Metas 60002C 9780791834534 ______ $645.00 _____________

ii-d, Popetes (Customa) 60002d 9780791834541 ______ $560.00 _____________

ii-d, Popetes (Metc) 6002dM 9780791834558 ______ $560.00 _____________

III, Rules for Construction of Nuclear Facility Components:

iii-NCA, Genea requements fo dson 1 an dson 2 60003r 9780791834565 ______ $430.00 _____________

dson 1:iii-Nb, Cass 1 Components 60003b 9780791834572 ______ $430.00 _____________

iii-NC, Cass 2 Components 60003C 9780791834589 ______ $430.00 _____________

iii-Nd, Cass 3 Components 60003d 9780791834596 ______ $430.00 _____________

iii-NE, Cass MC Components 60003E 9780791834602 ______ $400.00 _____________

iii-NF, Suppots 60003F 9780791834619 ______ $400.00 _____________

iii-NG, Coe Suppot Stuctues 60003G 9780791834626 ______ $380.00 _____________

iii-Nh, Cass 1 Components n Eeate Tempeatue Sece 60003h 9780791834633 ______ $400.00 _____________

iii Appences 60003A 9780791834640 ______ $475.00 _____________

Division 2:iii-2, Coe fo Concete Contanments 600032 9780791834657 ______ $455.00 _____________

Division 3:iii-3, Contanments fo Tanspotaton an Stoage of Spent

Nucea Fue an hg lee raoacte Matea an Waste 600033 9780791834664 ______ $455.00 _____________

dson 5:iii-5, hg Tempeatue reactos 600035 9780791834671 ______ $455.00 _____________

IV, Rules for Construction of Heating Boilers 600040 9780791834688 ______ $375.00 _____________

V, Nondestructive Examination 600050 9780791834695 ______ $415.00 _____________

VI, Recommended Rules for the Care and Operation of Heating Boilers 600060 9780791834701 ______ $220.00 _____________

VII, Recommended Guidelines for the Care of Power Boilers 600070 9780791834718 ______ $220.00 _____________

VIII, Rules for Construction of Pressure Vessels:

viii-1, dson 1 600081 9780791834725 ______ $570.00 _____________

viii-2, dson 2, Atenate rues 600082 9780791834732 ______ $570.00 _____________

viii-3, dson 3, Atenate rues fo Constucton ofhg Pessue vesses 600083 9780791834749 ______ $510.00 _____________

IX, Welding and Brazing Qualifications 600090 9780791834756 ______ $425.00 _____________

X, Fiber-Reinforced Plastic Pressure Vessels 600100 9780791834763 ______ $335.00 _____________

XI, Rules for Inservice Inspection of Nuclear Power Plant Components 600011 9780791834770 ______ $570.00 _____________

XII, Rules for Construction and Continued Service of Transport Tanks 600012 9780791834787 ______ $380.00 _____________

Coe Cases: boes an Pessue vesses 600120* 9780791834794 ______ $570.00 _____________

Coe Cases: Nucea Components 60012N* 9780791834800 ______ $570.00 _____________

bne wt lae 600140 ______ $20.00 _____________

Compete bPvC-2013 (appox. 10% scount o Suggeste lst Pce) 6X0230 9780791834817 ______ $12,700.00 _____________

Compete bPvC 2013 wt 34 bnes 6X0330 9780791834824 ______ $13,380.00 _____________

ASME Custome Cae ten w sen ou a Pofoma noce wt appcae saes tax an sppng / anng cages. SUbTOTAl: _____________

*Codes Cases are issued four times per year. This price reflects inclusive purchase of all Code Cases issued during the upcoming, two-year publishing cycle for BPVC-2013. However, individual CodeCases are also available for separate purchase. Visit www.asme.org or contact ASME Customer Care for details.

ASMEs Boiler and Pressure Vessel Code (BPVC) | 2013 Sections


12/14

PUBLICATIONS: ORDER NO. QUANTITY LIST PRICE USD LINE TOTAL

Product Certification Packages per Designator:

A (Assem of Powe boes) bPvCb ______ $2,565.00 _____________

E (Eectc boes) bPvCE ______ $2,925.00 _____________

h (Cast ion Secton heatng boes) bPvCh2 ______ $475.00 _____________

h (Fe Assem of boes) bPvCh ______ $1,010.00 _____________

h (heatng boes, Except Cast ion) bPhlW ______ $3,140.00 _____________

hlW (lne Potae Wate heates) bPhlW ______ $3,140.00 _____________

hv (heatng boe Safet vaes) bPvhv ______ $3,215.00 _____________

M (Mnatue boes) bPvCM ______ $4,170.00 _____________

N, NA, NPT, NS (N-Tpe Cetcates of Autozaton an Cetcates of Accetaton) bPNPT ______ $3,160.00 _____________

Nv (Nucea Safet an Pessue reef vaes ncuesbPvC-ii-A, Secton ii, Pat A, Feous Mateas Speccatons) bPNvA ______ $3,235.00 _____________

Nv (Nucea Safet an Pessue reef vaes ncuesbPvC-ii-b, Secton ii, Pat b, Nonfeous Mateas Speccatons) bPNvb ______ $3,235.00 _____________

Nv (Nucea Safet an Pessue reef vaes ncuesbPvC-ii-d, Secton ii, Pat d, Popetes, Customa o Metc) bPNvd ______ $3,235.00 _____________

N3 (N-Tpe Cetcates of Autozaton an Cetcates of Accetaton) PvCN3 ______ $2,590.00 _____________

QSC (Quat Sstems Cetcates Matea Manufactues, Matea Suppes) PvCMS - Contact ASME

rP (Fe-renfoce Pastc vesses) bPvrP ______ $425.00 _____________

S (Powe boes) / PP (Pessue Ppng) bPvCA ______ $4,695.00 _____________

T (Tanspot Tanks) bPvCT ______ $4,380.00 _____________

Td (Tanspot Tanks, ruptue dsc deces) bPvCTd ______ $3,930.00 _____________

Tv (Tanspot Tanks, Safet vaes) bPvCTv ______ $3,930.00 _____________

U (Pessue vesses, dson 1) bPvUM ______ $4,620.00 _____________

Ud (ruptue dsc deces) bPvCUd ______ $4,170.00 _____________

UM (Mnatue Pessue vesses) bPvUM ______ $4,620.00 _____________

Uv (Pessue vesses, Safet vaes ncues bPvC-viii-1, Pessue vesses, dson 1) bPUv1 ______ $4,170.00 _____________

Uv (Pessue vesses, Safet vaes ncues bPvC-viii-2, Pessue vesses, dson 2) bPUv2 ______ $4,170.00 _____________

U2 (Pessue vesses, dson 2) bPvU1 ______ $4,620.00 _____________

Uv3 (Pessue vesses, Safet vaes) bPUv3 ______ $4,090.00 _____________

U3 (Pessue vesses, dson 3) bPvU3 ______ $4,540.00 _____________

v (boe Safet vaes) bPvCv ______ $3,920.00 _____________


Related ASME Codes and Standards:PUBLICATIONS: ORDER NO. ISBN QUANTITY LIST PRICE USD LINE TOTAL

Official Spanish-language Translations:

bPvC-i-2010 Seccon 1, regas paa a Constuccon e Caeas e Enega XS0010* 9780791832998 ______ $210.00 _____________

b31.8S-2010 Gestn e intega e Sstemas e Gasouctos A21410* 9780791833667 ______ $95.00 _____________

B16 Series on Valves, Fittings, Flanges and Gaskets:

b16.5-2009 Ppe Fanges an Fange Fttngs:NPS 1/2 toug NPS 24 Metc/inc Stana M01509* 9780791831991 $210.00 _____________

b16.9-2007 Facto-Mae Wougt buttweng Fttngs J10907* 0791831019 ______ $110.00 _____________

b16.11-2011 Foge Fttngs, Socket-Weng an Teae M01611* 9780791834015 ______ $65.00 _____________

b16.34-2009 vaes Fange, Teae an Weng En J01809* 9780791832233 ______ $170.00 _____________

b16.47-2011 lage damete Stee Fanges:NPS 26 Toug NPS 60 Metc/inc Stana J12911* 9780791833773 ______ $115.00 _____________

Product Certification Packageslst pces ncate n te foowng Pouct Cetcaton Packages ncue petnent pucatons of te 2010 Eton of ASMEs boe & Pessue vesse Coe(bPvC). Upon oca pucaton of te 2013 Eton of te bPvC on Ju 1, 2013, st pces of tese Pouct Cetcaton Packages w e ese accong.Pease contact ASME CustomeCae fo an questons.


13/14

PUBLICATIONS: ORDER NO. ISBN QUANTITY LIST PRICE USD LINE TOTAL

B31 Series on Piping:

b31.1-2012 Powe Ppng A05812* 9780791834169 ______ $260.00 _____________

b31.4-2009 Ppene Tanspotaton Sstems folqu hocaons an Ote lqus A03809* 9780791832653 ______ $160.00 _____________

b31.8-2010 Gas Tansmsson an dstuton Ppng Sstems A04510* 9780791832844 ______ $205.00 _____________

b31.8S-2010 Managng Sstem integt of Gas Ppenes A45S10* 9780791832851 ______ $145.00 _____________

b46.1-2009 Suface Textue, Suface rougness, Waness an la A14312* 9780791832622 ______ $169.00 _____________

bPE-2012 bopocessng Equpment A14309* 9780791834220 ______ $230.00 _____________

CSd-1-2012 Contos an Safet deces fo Automatca Fe boes A09112* 9780791834107 ______ $93.00 _____________

FSS Series:

APi 579-1/ASME FFS-1 2007 Ftness-Fo-Sece A16407 0791831027 ______ $720.00 _____________

APi 579-1/ASME FFS-1 2007 Ftness-Fo-Sece Cd Fomat A164C7 0791831191 ______ $752.00 _____________

FFS-1-2007 Ftness-fo-Sece Pnt an Cd Package AX6407 ______ $1,079.00 _____________

FSS-2-2009 Ftness-Fo-Sece Poem Manua A17408 9780791831519 ______ $180.00 _____________

Nuclear:

AG-1-2009 Coe on Nucea A an Gas Teatment A12209 9780791831809 ______ $350.00 _____________

N278.1-1975 Sef-Opeate an Powe-Opeate Safet-reate vaesFunctona Speccaton Stana A00084* ______ $35.00 _____________

N509-2002 Nucea Powe Pant A-Ceanng Unts an Components A08502* 0791828042 ______ $75.00 _____________

N510-2007 Testng of Nucea A-Teatment Sstems A08207* 0791831132 ______ $55.00 _____________

N511-2007 in-Sece Testng of Nucea A Teatment, heatng,ventatng, an A-Contonng Sstems A16507* 0791831140 ______ $39.00 _____________

NOG-1-2010 rues fo Constucton of Oeea an Gant Canes(Top runnng bge, Mutpe Ge) A11910* 9780791832752 ______ $153.00 _____________

NQA-1-2008 Quat Assuance Pogam requementsfo Nucea Factes A105E8 0791831272 ______ $245.00 _____________

NUM-1-2009 rues fo Constucton of Canes, Monoas, an hosts(wt bge o Toe o host of te Uneung Tpe) J14309* 9780791832769 ______ $190.00 _____________

OM-2009 Opeaton an Mantenance of Nucea Powe Pants A13109 9780791832271 ______ $225.00 _____________

QAi-1-2010 Quacatons fo Autoze inspecton J95010* 9780791832103 ______ $60.00 _____________

QME-1-2007 Quacaton of Acte Mecanca Equpment Usen Nucea Powe Pants A13607* 0791831086 ______ $95.00 _____________

rA-S-2008 Stana fo lee 1 / lage Ea reease FequencPoastc rsk Assessment fo Nucea Powe Pant Appcatons A15308 9780791831403 ______ $235.00 _____________

PCC Series on Post Construction:

PCC-1-2010 Guenes fo Pessue bounabote Fange Jont Assem A15010* 9780791832745 ______ $89.00 _____________

PCC-2-2011 repa of Pessue Equpment an Ppng A17511* 9780791833438 ______ $130.00 _____________

PCC-3-2007 inspecton Pannng Usng rsk-base Metos A16807* 9780791831281 ______ $69.00 _____________

PTB Series on Pressure Vessels:

PTb-1-2009 ASME Secton viii dson 2 Ctea an Commenta A19509* 9780791832240 ______ $195.00 _____________

PTb-2-2009 Gue to lfe Cce Management ofPessue Equpment integt A19609* 9780791832257 ______ $95.00 _____________

PTb-3-2010 ASME Secton viii dson 2 Exampe Poem Manua A20410* 9780791833285 ______ $175.00 _____________

PTC 25-2008 Pessue reef deces C06108* 9780791831694 ______ $95.00 _____________

PvhO-1-2012 Safet Stana fo Pessue vesses fo human Occupanc A09212* ______ $200.00 _____________

rTP-1-2011 renfoce Temoset Pastc Cooson resstant Equpment J127E1* 9780791833568 ______ $255.00 _____________


*Also available as digital download (single-user PDF.) Visit www.asme.org or contact ASME Customer Care for details.

Related ASME Codes and Standards (continued):


14/14

For all other ASME programs --including product / personnel certifications, training& development courses, professional conferencesand publications visit:www.asme.org.

Ordering Information

When ordering with your company purchase order, please make sure

that your ASME account number, if available, is indicated. This account

number can be found on ASME invoices, packing lists and statements.

CA, FL, GA, IL, KY, TX and DC purchasers will be invoiced for applicable

sales tax. Canadian purchasers will be invoiced 7% GST, unless ASME is

furnished with a valid tax exemption certificate.

Fo ntenatona funs tansfes, pease ncate ou ASME oe

number, invoice number, and account number. Failure to indicate

your ASME order number, invoice number, and account number

may delay shipment considerably.

Pease e sue to ncue ou anks we tansfe fees n te tota

amount submitted.

Pofoma noces sowng a cages, ncung sppng /

handling charges, will be furnished upon receipt of order. Orders

ecee wt pament w e noce fo sppng / anng

cages. ASMEs stana sppng / anng cages ma e

viewed here:

www.asme.og/aout-asme/saes-poc#cat

International Orders

Advance payment is required for all international orders. ASMEaccepts most major credit cards, including MasterCard, VISA, American

Express, Discover and Euro. ASME also accepts checks written in some

international currencies. Contact ASME to determine which currencies

are acceptable or visit:

www.asme.og/memesp/pament_metos.cfm.

Two Park Avenue

New York, NY

10016-5990 U.S.A.

ASMEs Boiler and Pressure Vessel Code (BPVC) | 2013

Prices are subject to change without notice.

bpv international renewal application

Documents