borplus product guide

BORplus2005_Cover_ENG_05.09.fh9 5/9/06 18:05 Page 2

Composite

C M Y CM MY CY CMY K

FOR USE IN HOT&COLD TAP WATER

AND HEATING SYSTEMS

Installation system

BORplus

Product

description

july 2005

EPIC

G111, L61, X721

for home

Top worldwide manufacturer of plastic pipe systems

BORplus_ENG_2006.05.09.fh9 5/9/06 13:59 Page 1

Composite


Table of contents

I. Background information ....................................................................................... 3

1. Basic data .................................................................................................. 3

2. System application ..................................................................................... 3

3. System benefits .......................................................................................... 3

II. System characteristics ......................................................................................... 4

1. Scope and conditions of use ....................................................................... 4

2. Product range ............................................................................................. 4

3. Pipes – matching pipe types with system operation parameters ................. 4

4. Fittings ........................................................................................................ 4

5. Approvals and certificates............................................................................ 5

III. Assembly ............................................................................................................. 5

1. Connection technique.................................................................................. 5

2. Installation guide ......................................................................................... 6

3. Welding process parameters ....................................................................... 7

4. Pipe connection........................................................................................... 7

IV. Guarantee ............................................................................................................. 8

V. Product description .............................................................................................. 9

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]

BORplus installation system

Table of contents

2


Composite


BORplus is made of type 3 polypropylene (PP-R). This material is

resistant to simultaneous and long-term exposure to temperature

and pressure of the medium, as well as 100% resistant to corrosion

and exposure of over 300 different chemical substances at various

temperatures.

Top-quality granulated plastic materials used to manufacture BORplus

system include:

BOREALIS (RA 130E-8427), Vestolen P 9421,

and TIPPLEN CS4-8000 G.

I. Background

information

1. Basic data

BORplus is an all-inclusive, high-quality, and well-tested polypropy-

lene installation system.

Operational safety and useful life of over 50 years of BORplus is ba-

sed on factors such as top-quality raw materials, strict control of

the manufacturing process, and fusion-welding connection techni-

ques used during assembly.

2. System application

BORplus can be used both in assembly of new systems or for repairs

of existing systems:

water systems (hot and cold tap water)

heating systems (radiator heating)

cooling systems (chilled water)

in all types of residential buildings (single-family houses and apart-

ment blocks) and public utility facilities.

Given its good chemical resistance, the system can also be used

for the following applications:

industry (compressed air systems, various types of process

piping)

agriculture and horticulture

3. Advantages

fittings constructed with accordance to requirements of pres-

sure class PN 25

lifetime – over 50 years

secure and quick assembly – fusion-welding guarantees

absolute tightness of connections

low noise level – vibrations are damped, sounds are absorbed

low linear resistance factor (k=0.007) – no pipe encrustation

reduced local resistance factors (even up to 60%) – unique

design of fittings

low thermal conductivity coefficient (0.21 W/mxK) – reduced

thermal losses

sanitary (hygienic) aspects (neutral to water)

resistant to many chemicals

www.wavin.pl


BORplus INSTALLATION SYSTEM Product description – july 2005


I. Background information

3


Composite


II. System characteristics

4. Fittings

Compared to other PP systems, the distinguishing characteristics

of BORplus fittings include:

smoother transition at the fitting-pipe point of contact, reducing

flow irregularities

shift of the axis of symmetry in 90° elbows outside the fitting

(diameter range: 16 – 40 mm), directing the main stream of the

flow to a more rounded arch

As a result, BORplus ensures a threefold reduction of hydraulic los-

ses compared to other PP systems.

2. Product range

homogenous PP pipes class PN 10, PN 16, PN 20, diameter

range: 16 – 110 mm

PP pipes stabilised with a perforated aluminium insert, range

diameter: 16 – 110 mm

PP fittings, range diameter: 16 – 110 mm

PP fittings with fused elements (female and male threads)

PP ball and stright valves

accessories and fastening tools

1. Scope and conditions of use

Table 1. Product range and properties of pipes.

System

type

cold tapwater systems

hot tapwater systems

central heatingsystems

Operating pressure P [b]

Operating temperature top [°C]

Maximum emergency temperature te [°C]

Maximum operating time at te

10 10 6

20 60 80

- 95 100

- 100 100

Note: Emergency temperature (te) refers to periods of system breakdowns (e.g. control systems) when temperature might rise to levels presented in the table

above during the total operating time of 100 hours during 50 years of use, with the maximum emergency operating time up to 3 hours.

3. Pipes – matching pipe types with system operation parameters

Depending on the required operating conditions for different tempe-

rature and pressure values, the following pipe pressure range is

available:

PN 10 pipes – cold water systems with operating temperature

up to 20°C and pressure up to 10 bar

PN 16 pipes – cold water systems with operating temperature

up to 20°C and pressure up to 10 bar, as well as hot water sys-

tems with operating temperature up to 60°C and pressure up

to 6 bar

PN 20 pipes and stabilised pipes – cold and hot water systems

with operating temperature up to 60°C and pressure up to

10 bar, as well as central heating systems with operating tem-

perature up to 80°C and pressure up to 6 bar

PP pipes stabilised with a perforated aluminium insert strengthen

the pipe and reduce its thermal elongation.

Water flow characteristics

Standard elbow withcentric profile

elbow withnon-centric profile

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]


II. System characteristics

4


Composite



Pressure loss values

1. Connection technique

In general, BORplus pipes and fittings are connected using the poly-

fusion welding technique at 260 – 280°C. This technique guarantees

permanent fusion of the fitting and piping material, producing a uni-

form weld. As a result, the connection has even greater strength

than the pipe itself.

Alternatively, it is possible to use fittings with nickel-coated fused

brass elements with male or female threads, or flanged sleeves.

With these techniques, polypropylene systems can be connected

to any other material used in installation technologies.

5. Approvals and certificates

In line with current requirements for products and materials used in

construction, BORplus has all technical approvals of COBRTIINSTAL

and sanitary certificates of the National Institute of Hygiene.

III. Assembly

elbow

standardelbow

Flow [l/h]

Pre

ssure

loss v

alu

es Δ

p [b

]

0 500 1 000 1 500 2 000 2 500 3 000

1,0

0,0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

www.wavin.pl



II. System characteristics/III. Assembly

5


Composite


2. Installation guide

7. It is recommended to keep the connection

fixed for the next 10 – 20 seconds, allowing

the weld to cool down partially and achieve

the initial strength. It is now possible to make

other connections of the system. Full load of

the weld is allowed only when the connection

has cooled down completely.

Cooling

2. Before welding, pipes and fittings must be

cleaned (to remove dust, grease, etc.) and

dried.

3. Mark the required depth of pipe insertion into

the fitting (for a given outer pipe diameter –

see the table).

1. Pipes should be cut down to required length,

at 90° to the axis, using appropriate tools

(pipe shears or cutters).

Cutting Cleaning Marking

4. Before welding any stabilised PP pipes, a layer

of aluminium with the outer plastic coating

must be removed along the entire depth of

the weld. To remove the aluminium coat, use

a special coarse file with the diameter that fits

pipe dimensions.

5. Simultaneously insert the pipe end and slide

the fitting over corresponding heating tips of

the welder (heated up to 260 – 280°C earlier).

Keep the required heating time – see heating

time values for different system dimensions.

6. After heating, remove both elements from

heating tips and push the pipe into the fitting

flange up to the depth marked earlier. The

welding time depends on the outer diameter

of the pipe. Good welds should have a double,

uniform fin of material pushed out to the sur-

face, along the circumference connected

elements.

Heating Welding

Aluminium layer

stripping (stabilised

pipes only)

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]


III. Assembly

6


Composite



3. Welding process parameters

Pipe diameter Welding depth Heating time* Welding time Cooling time

[mm] [mm] [s] [s] [min]

16 13 5 4 2

20 14 5 (3) 4 2

25 15 7 (4) 4 2

32 16 8 (4) 6 4

40 18 12 (6) 6 4

50 20 18 (9) 6 4

63 24 24 (12) 8 6

75 26 30 (15) 10 8

90 29 40 (20) 10 8

110 32,5 50 (25) 10 8

Note:

Values presented in the table refer to PN 16, PN 20 pipes and stabilised pipes.

* Heating time values in brackets refer to PN 10 pipes.

* With the outside temperature below +5ºC, the heating time should be increased by 50%.

4. Pipe connection

Distances between (sliding) supports are given in cm for vertical

pipes made of:

polypropylene pipes (homogenous)

Pipe outside diameter

[mm]

Temperature of flowing water [ºC]

20 30 40 50 60 70

16 75 70 70 65 65 55

20 80 75 70 70 65 60

25 85 85 85 80 75 70

32 100 95 95 90 85 75

40 110 110 105 100 95 85

50 125 120 115 110 105 90

63 140 135 130 125 120 105

75 155 150 145 135 130 115

90 170 165 160 155 150 145

110 190 185 180 175 160 155

polypropylene pipes (stabilised)

Pipe outside diameter

[mm]

Temperature of flowing water [ºC]

20 30 40 50 60 70

16 125 120 120 110 110 90

20 135 125 120 120 110 100

25 145 145 145 135 125 120

32 170 160 160 150 145 125

40 185 185 180 170 160 145

50 210 205 200 185 180 150

63 235 230 220 210 200 180

75 250 245 235 225 210 190

90 265 260 250 240 230 210

110 270 265 255 245 235 215

www.wavin.pl



III. Assembly

7


Composite


IV. Guarantee

Wavin-Metalplast-Buk Sp. z o.o. guarantees trouble-free operation

of the BORplus installation system for the period of 10 years after

the date of purchase of products covered by the guarantee, regardless

of the date when the system is put into operation.

This guarantee covers all elements of the BORplus installation system

manufactured or supplied by Wavin (excluding assembly tools). Any

compensation is guaranteed only on condition that all principles of

assembly, design, and operation have been complied with, as per

Wavin's recommendations or generally accepted principles of

construction technology.

If any other products (pipes or fittings) are used in the assembly

instead of BORplus installation products supplied by Wavin, this

guarantee shall be null and void.

Any other types of damage (such as mechanical system damage,

frost damage, etc.) or assembly-related errors and faults are not

covered by this guarantee.

If any defects are identified, Wavin hereby reserves the right to test

the defective system on-site within 7 days after any defect is identified,

before any corrective action is taken. In addition, the user should

present the receipt of purchase of products covered by this guarantee

when any defect is reported. Defects shall be reported to and the

said receipt shall be presented at the point of sale where products

covered by this guarantee were purchased. Failure to do so relieves

Wavin of any and all liability under this guarantee.

This guarantee covers the return of costs incurred by any third

person to make good or disassemble defective products as well as

to assemble, supply, and re-install defect-free products.

This guarantee does not cover any lost opportunity compensation,

in particular related to downtimes, business interruptions, reduced

value, or any other consequential damage. Any further claims shall

be excluded.

Wavin's liability for damage shall be limited to: 2,000,000 PLN per

any damage and 4,000,000 PLN per cumulative damage in one ca-

lendar year.

Wavin hereby reserves the right to contract any third-party specialist

companies to carry out any repairs of the system, at Wavin's

discretion.

Any period of repair shall not extend the total guarantee period.

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]


IV. Guarantee

8


Composite


BORplus INSTALLATION SYSTEM Zestawienie produktów – july 2005

Pipes

PN 10 pipe, 4 m longproduct code former

product code

s

[mm]

D

[mm]

3045030100 9503010 20 1,93045030130 9503013 25 2,33045030160 9503016 32 2,93045030190 9503019 40 3,73045030220 9503022 50 4,63045030250 9503025 63 5,83045030280 9503028 75 6,83045030310 9503031 90 8,23045030340 9503034 110 10,0


product code

s

[mm]

D

[mm]

3045025070 9502507 16 2,23045025100 9502510 20 2,83045025130 9502513 25 3,53045025160 9502516 32 4,43045025190 9502519 40 5,53045025220 9502522 50 6,93045025250 9502525 63 8,63045025280 9502528 75 10,33045025310 9502531 90 12,33045025340 9502534 110 15,1

PN 20 pipe in coils, 100 m longproduct code former

product code

s

[mm]

D

[mm]

3045035070 9503507 16 2,73045035100 9503510 20 3,4


product code

s

[mm]

D

[mm]

3045020070 9502007 16 2,73045020100 9502010 20 3,43045020130 9502013 25 4,23045020160 9502016 32 5,43045020190 9502019 40 6,73045020220 9502022 50 8,33045020250 9502025 63 10,53045020280 9502028 75 12,53045020310 9502031 90 15,03045020340 9502034 110 18,3

PN 20 stabilised pipe, 4 m longproduct code former

product code

s

[mm]

D

[mm]

3245050072 9505007 16 2,73245050102 9505010 20 3,43245050132 9505013 25 4,23245050162 9505016 32 5,43245050192 9505019 40 6,73245050222 9505022 50 8,43245050252 9505025 63 10,53245050280 9505028 75 12,53245050310 9505031 90 15,03245050340 9505034 110 18,4

s

D

unit of

measure

mmmmmmmmmm

unit of

measure

mmmmmmmmmm

unit of

measure

mm

unit of

measure

mmmmmmmmmm

unit of

measure

mmmmmmmmm

D

s

D

s

s

D

s

D

www.wavin.pl



V. Product description

9


Composite


Dz Dw

Dz Dw

Corrugated casing pipe (red),coil 50 mproduct code former

product code

Dz

[mm]

Dw

[mm]

3145080070 9508007 21 253145080100 9508010 23 283145080130 9508013 29 343145080160 9508016 36 43

Corrugated casing pipe (blue),coil 50 mproduct code former

product code

Dz

[mm]

Dw

[mm]

3145085070 9508507 21 253145085100 9508510 23 283145085130 9508513 29 343145085160 9508516 36 43

Corrugated casing pipe (red),coil 25 mproduct code former

product code

Dz

[mm]

Dw

[mm]

3145080190 9508019 44 52

Corrugated casing pipe (blue),coil 25 mproduct code former

product code

Dz

[mm]

Dw

[mm]

3145085190 9508519 44 52

Pipes continued

Elbow 90ºproduct code former

product code

3045140070 95140073045140100 95140103045140130 95140133045140160 95140163045140190 95140193045140220 95140223045140250 95140253045140280 95140283045140310 95140313045140340 9514034

Elbows

Nipple elbow 90ºproduct code former

product code

3045143100 95143103045143130 95143133045143160 9514316

162025324050637590

110

D

[mm]

Z

[mm]

L

[mm]

16192124293440465056

222630354250607086

105

unit of

measure

mmmm

unit of

measure

m

unit of

measure

mmmm

unit of

measure

m

unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.

202532

D

[mm]

Z

[mm]

192124

L

[mm]

313644

L1

[mm]

263136

unit of

measure

szt.szt.szt.

Z

D

L

Z

D

L

L1

D

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]



10


Composite


www.wavin.pl


Teeproduct code former

product code

3045155070 95155073045155100 95155103045155130 95155133045155160 95155163045155190 95155193045155220 95155223045155250 95155253045155280 95155283045155310 95155313045155340 9515534

Tees

Reducer tee at branchingproduct code former

product code

3045158100 95158103045158130 95158133045158160 95158163045159130 95159133045159160 95159163045159190 95159193045159220 95159223045160160 95160163045160190 95160193045160220 95160223045161190 95161193045161220 95161223045161250 95161253045162220 95162223045162250 95162253045162280 95162283045163250 95163253045163280 95163283045164280 95164283145163310 95163313145164310 95164313145165310 9516531

Elbow 45ºproduct code former

product code

3045146070 95146073045146100 95146103045146130 95146133045146160 95146163045146190 95146193045146220 95146223045146250 95146253045146280 9514628

Nipple elbow 45ºproduct code former

product code

3045149100 95149103045149130 95149133045149160 9514916

1620253240506375

D

[mm]

Z

[mm]

L

[mm]

1315161821242831

1516182023263135

20 16 20 15 54 2725 16 25 16 63 2932 16 32 18 68 3325 20 25 16 63 3032 20 32 18 68 3440 20 40 21 81 3950 20 50 25 89 4332 25 32 18 76 3640 25 40 21 81 4150 25 50 24 97 4740 32 40 21 91 4350 32 50 24 97 4963 32 63 28 119 5850 40 50 28 109 5263 40 63 28 119 6075 40 75 31 139 6863 50 63 28 134 6375 50 75 31 139 7175 63 75 31 156 7590 50 90 36 140 7290 63 90 36 148 7490 75 90 36 160 78

D1

[mm]

D2

[mm]

D1

[mm]

Z

[mm]

L

[mm]

L1

[mm]

unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.

unit of

measure

szt.szt.szt.

L1

[mm]

162630

L

[mm]

202530

Z

[mm]

192124

202532

D

[mm]

unit of

measure


L1

[mm]

232732384555677889

105

L

[mm]

4654637691

109134156179210

Z

[mm]

13151925313950597298

162025324050637590

110

D

[mm]

unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.

Z

L D

D

Z

L1

L

DD

Z

L1

L

D

D

L1

Z

L

D1

D2




11


Composite


product code former

product code

3045105070 95105073045105100 95105103045105130 95105133045105160 95105163045105190 95105193045105220 95105223045105250 95105253045105280 95105283045105310 95105313045105340 9510534

Coupler

Pipe cap

product code former

product code

3045223070 95223073045223100 95223103045223130 95223133045223160 95223163045223190 95223193045223220 95223223045223250 95223253045223280 95223283145223310 9522331

Bypass

product code former

product code

3045230070 95230073045230100 95230103045230130 95230133045230160 9523016

Reducers

Reducerproduct code former

product code

3045110100 95110103045110130 95110133045111130 95111133045111160 95111163045111190 95111193045112160 95112163045112190 95112193045113190 95113193045112220 95112223045113220 95113223045114220 95114223045113250 95113253045114250 95114253045114280 95114283045115250 95115253045115280 95115283045116280 9511628

162025324050637590

110

D

[mm]

Z

[mm]

L

[mm]

13151618212428313642

293235394450586689

101

162025324050637590

D

[mm]

Z

[mm]

L

[mm]

131516182124283137

252832364250586572

16202532

D

[mm]

Z

[mm]

L

[mm]

18222734

808693

101

unit of

measure


unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.szt.

unit of

measure

szt.szt.szt.szt.

D1

[mm]

2025253240324040505050636375637575

D2

[mm]

1616202020252532253240324040505063

Z

[mm]

1516161821182121242424282831283131

L

[mm]

3840424548465052555759616368667175

L1

[mm]

2629293339333939464646525258525858

unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.szt.

Z

L

D

Z

L

D

320

L

R100

R100

Z

D

Z

L1

L

D1 D2

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]



12


Composite


www.wavin.pl


Flanged fleeve

product code former

product code

3045238250 95238253045238280 95238283045238312 95238313045238342 9523834

Threaded elements

90º elbow with male thread(wall-mounted)product code former

product code

3045330070 9533007 16x½" 25 26 49 523045330100 9533010 20x½" 25 26 49 523045330130 9533013 25x½" 25 30 49 553045331100 9533110 20x¾" 28 26 55 553045331130 9533113 25x¾" 28 30 55 57

D

[mm]

Z

[mm]

Z1

[mm]

L

[mm]

L1

[mm]

90º elbow with female thread

product code former

product code

3045390070 9539007 16x½" 22 383045390100 9539010 20x½" 26 383045390130 9539013 25x½" 30 413045391100 9539110 20x¾" 26 403045391130 9539113 25x¾" 30 423045391160 9539116 32x¾" 32 46

D

[mm]

Z

[mm]

L

[mm]

90º elbow with female thread(wall-mounted)product code former

product code

3045310070 9531007 16x½" 25 26 49 383045310100 9531010 20x½" 25 26 49 383045310130 9531013 25x½" 25 30 49 413045311100 9531110 20x¾" 28 26 55 403045311130 9531113 25x¾" 28 30 55 42

D

[mm]

Z

[mm]

Z1

[mm]

L

[mm]

L1

[mm]

Expansion loop

product code former

product code

H

[mm]

D

[mm]

3045248070 9524807 16 2,7 260 1553045248100 9524810 20 3,4 320 1703045248130 9524813 25 4,2 330 2103045248160 9524816 32 5,4 400 2403045248190 9524819 40 6,7 400 260

s

[mm]

L

[mm]

Nipple reducerproduct code former

product code

3045110110 95110113045111140 95111143045112170 95112173045113200 95113203045115310 95115313045116310 95116313045117310 95117313245180312 9511831

unit of

measure

szt.szt.szt.szt.szt.szt.szt.szt.

L1

[mm]

1820212330343842

L

[mm]

3437404565707493

Z

[mm]

1315161824283133

D2

[mm]

1620253250637590

D1

[mm]

20253240909090

110

D

[mm]

637590

110

L

[mm]

95110136164

L1

[mm]

637180

103

unit of

measure

szt.szt.szt.szt.

unit of

measure

szt.szt.szt.szt.szt.

unit of

measure


unit of

measure


unit of

measure

szt.szt.szt.szt.szt.szt.

Z

A-A

L

A A

L1

Z1

Z

L1

L

D2 D1

L1

L D

H

L

D

A-A

Z

L

L1

AA

Z1

Z

L




13


Composite


90º elbow with female threadand wrench unit

product code former

product code

3045395160 9539516 32x1" 34 59

Threaded elements continued

90º elbow with male thread

product code former

product code

3045400070 9540007 16x½"3045400100 9540010 20x½"3045400130 9540013 25x½"3045401100 9540110 20x¾"3045401130 9540113 25x¾"3045401160 9540116 32x¾"

90º elbow with male threadand wrench unitproduct code former

product code

3045405160 9540516 32x1" 34 78

Tee with female threadat branchingproduct code former

product code

3045410070 9541007 16x½"x163045410100 9541010 20x½"x203045411100 9541110 20x¾"x203045410130 9541013 25x½"x253045411130 9541113 25x¾"x253045411160 9541116 32x¾"x32

Tee with female thread at branching,with wrench unitproduct code former

product code

3045415160 9541516 32x1"x32 18 68 78

Tee with male threadat branching

Tee with male thread at branching,with wrench unitproduct code former

product code

3045425160 9542516 32x1"x32 18 68 78

D

[mm]

Z

[mm]

L

[mm]

D

[mm]

Z

[mm]

L

[mm]

L1

Z

L

222630263032

525255555761

D

[mm]

Z

[mm]

L

[mm]

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

131515161618

445151595963

505255555759

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

product code former

product code

3045420070 9542007 16x½"x163045420100 9542010 20x½"x203045421100 9542110 20x¾"x203045420130 9542013 25x½"x253045421130 9542113 25x¾"x253045421160 9542116 32x¾"x32

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

131515161618

445151595963

505255555759

unit of

measure

szt.

unit of

measure


unit of

measure

szt.

unit of

measure


unit of

measure

szt.

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

unit of

measure

szt.

unit of

measure


L

Z

L

Z

L

Z

L1

Z

L

L1

Z

L

L1

Z

L

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]



14


Composite



Coupler with female thread

product code former

product code

3045350070 9535007 16x½"3045350100 9535010 20x½"3045350130 9535013 25x½"3045351100 9535110 20x¾"3045351130 9535113 25x¾"

Coupler with female threadand wrench unitproduct code former

product code

3045362160 9536216 32x1"3045363190 9536319 40x1¼"3045364220 9536422 50x1½"3045365250 9536525 63x2"3045366280 9536628 75x2½"

Coupler with male thread

product code former

product code

3045370070 9537007 16x½"3045370100 9537010 20x½"3045370130 9537013 25x½"3045371100 9537110 20x¾"3045371130 9537113 25x¾"

Coupler with male threadand wrench unitproduct code former

product code

3045382160 9538216 32x1"3045383190 9538319 40x1¼"3045384220 9538422 50x1½"3045385250 9538525 63x2"3045386280 9538628 75x2½"3045386310 9538631 90x3"

Half-union with female thread

product code former

product code

3045430070 9543007 16x½"3045431070 9543107 16x¾"3045430100 9543010 20x½"3045431100 9543110 20x¾"3045431130 9543113 25x¾"3045432130 9543213 25x1"

Half-union with male thread

product code former

product code

3045440070 9544007 16x½"3045441070 9544107 16x¾"3045440100 9544010 20x½"3045441100 9544110 20x¾"3045441130 9544113 25x¾"3045442130 9544213 25x1"

60

Z

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

1315161516

4143464647

2828283131

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

1821242831

6472809098

5157626873

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

1315161516

5557586162

4143464647

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

182124283136

8391

102114123127

515762687384

D

[mm]

Z

[mm]

242424243030

D

[mm]

Z

[mm]

L

[mm]

323232323939

898990909195

unit of

measure


unit of

measure


unit of

measure


unit of

measure


unit of

measure


unit of

measure


Z L1

L

Z L1L

Z

L1L

Z

L1

L

Z

L

www.wavin.pl




15


Composite


Union

Z

L product code former

product code

3045450080 9545008 16x¾"x163045450110 9545011 20x¾"x203045450140 9545014 25x1"x25

D

[mm]

Z

[mm]

303037

L

[mm]

120121121

unit of

measure

szt.szt.szt.

Polypropylene manifold (4 branches)

product code former

product code

3045455100 9545510 4/20 32 443045456100 9545610 4/20 40 56

Valves

product code former

product code

3245500100 9550010W 203245500130 9550013W 253245500160 9550016W 323245500190 9550019W 403245500220 9550022W 503245500250 9550025W 63

Stright valve

product code former

product code

3245515100 9551510W 203245515130 9551513W 253245515160 9551516W 323245515190 9551519W 403245515220 9551522W 503245515250 9551525W 633145515280 9551528 75

Ball valve

Steel clamp with rubber insert

product code former

product code

3145803070 9580307 163145803100 9580310 203145803130 9580313 253145803160 9580316 323145803190 9580319 403145803220 9580322 503145803250 9580325 633145803280 9580328 753145803310 9580331 903145803340 9580334 110

D1

[mm]

D2

[mm]

D

[mm]

Z

[mm]

283039414860

L

[mm]

698089

112136162

D

[mm]

60657185

100115134

L

[mm]

D

[mm]

Threaded screw

product code former

product code

3145807010 9580701 M8x503145807020 9580702 M8x803145807030 9580703 M8x1003145807040 9580704 M8x1203145807050 9580705 M8x1503145807060 9580706 M8x200

DxL

[mm]

unit of

measure


unit of

measure

szt.szt.

unit of

measure

szt.szt.szt.szt.szt.szt.szt.

unit of

measure


unit of

measure


Z

[mm]

Z

40 57

246

D2

D1

L

ZD

L

D

L

D

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]



16


Composite



Support clamps

product code former

product code

3145800070 9580007 163145800100 9580010 203145800130 9580013 253145800160 9580016 323145800190 9580019 403145800220 9580022 503145800250 9580025 633145800280 9580028 753145800310 9580031 90

Plastic clamps

D

[mm]

Z

[mm]

L

[mm]

L1

[mm]

141414141414141515

40465157708096

105128

32384550637287

100121

Plastic clamps with a wall plug

Pipe cutter

product code former

product code

unit of

measure

D

[mm]

3145815040 9581540 16 – 40 szt.3145815750 9581575 40 – 63 szt.

unit of

measure


Mounting plate

product code former

product code

3145950010 9595001 64 220

Z

[mm]

L

[mm]

unit of

measure

szt.

Plugs

Pressure test plug (blue)

product code former

product code

3145955010 9595501 ½"3145955020 9595502 ¾"

Pressure test plug (red)

product code former

product code

3145955030 9595503 ½"3145955040 9595504 ¾"

Z

L

D

[mm]

Z

[mm]

L

[mm]

3239

6291

D

[mm]

Z

[mm]

L

[mm]

3239

6291

unit of

measure

szt.szt.

unit of

measure

szt.szt.

product code former

product code

3145805070 9580507 163145805100 9580510 203145806130 9580513 253145805160 9580516 323145805190 9580519 403145805220 9580522 503145805250 9580525 63

D

[mm]

Z

[mm]

Z1

[mm]

L

[mm]

14141817171923

88

1010101212

59647592

10111087

L1

[mm]

33384453607088

unit of

measure

szt.szt.szt.szt.szt.szt.szt.

Z

L

L1

Z

Z1

L

L1

L

Z

www.wavin.pl




17


Composite


Welders

Welder (800 W)

product code former

product code

unit of

measure

D

[mm]

3145825740 9582575 16 – 63 szt.

Welder (1200 W)

product code former

product code

unit of

measure

D

[mm]

3145825760 9582576 16 – 90 szt.

Welder (1600 W)

product code former

product code

unit of

measure

D

[mm]

3145825790 9582579 16 – 110 szt.

Welder mounting screw

product code former

product code

3145501010 9550101 22

Heating tip

product code former

product code

3145935070 95935073145935100 95935103145935130 95935133145935160 95935163145935190 95935193145935220 95935223145935250 95935253145935280 95935283145935310 95935313145935340 9593534

Coarse file for stabilised pipes

product code former

product code

3145945160 9594516 16/203145945200 9594520 20/253145945250 9594525 25/323145945320 9594532 32/403145945500 9594550 503145945630 9594563 633145945750 9594575 753145945900 9594590 903145946100 9594610 110

16 30 25 2520 34 26 3025 40 28 3432 50 30 4040 60 32 5050 70 35 6063 80 40 7075 100 43 9090 120 52 120

100 140 55 120

Z

[mm]

L

[mm]

L1

[mm]

B

[mm]

Z

[mm]

L

L

[mm]

unit of

measure


unit of

measure


unit of

measure

szt.

L

[mm]

666770765964666973

L

Z

L1

Z

B

L1

L

Z

PHONE+48 (46) 864 04 00

FAX+48 (46) 864 04 02

[email protected]



18


Composite



www.wavin.pl



Notes

19

BORplus2005_Cover_ENG_05.09.fh9 5/9/06 13:38 Page 1

Composite


Product

description

Wavin Metalplast-Buk Sp. z o.o.Dobieżyńska 43

64-320 Buk

phone: +48 (61) 891 10 00

fax: +48 (61) 891 10 11

e-mail: [email protected]

www. wavin.pl

All Wavin products come with complete

catalogue documentation and support of

our technical experts. Wavin Metalplast-Buk is continuously developing and improving its products; therefore, we reserve the right to modify

or change our product specifications without prior notice. All information contained herein was prepared in good faith

and was considered up-to-date and without any reservations as at the date when this specification was printed. This

catalogue does not constitute an offer within the meaning of the Civil Code, only information on the product portfolio

offered by Wavin Metalplast-Buk.

“WAVIN for home” sanitary and heatinginstallation system

Our goal is to provide our individual and institutional investors with top-quality

building installation and heating systems. Based on many years of experience,

access to cutting-edge technologies, innovative solutions, and focus on

customer needs, we are able to offer the following range of reliable products:

PVC soil & waste system and Wavin AS low-noise sanitary system,

sanitary and heating installation systems: Tigris Alupex, Tigris Pex,

BORplus, Hepworth,

Wavin QuickStream syphonic roof drainage system,

Kanion gutter systems,

around the house drainage,

linear drainage system,

individual sewer treatment system.

Installation system

BORplus

for home

Wavin Metalplast-Buk Sp. z o.o.Sochaczew Plant

Koscinskiego 23

phone: +48 (46) 864 04 00

fax: +48 (46) 864 04 02

Order service

borplus product guide

Documents

borplus installation

borplus installation

borplus installation

borplus installation

cold tap water

wrench unitproduct

installation

corrugated