bordes
DESCRIPTION
cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosas cosasTRANSCRIPT
01-005700 Vacation
Continuous Stamp™ WheelEducation
Stamp bordErS or a wholE pagE, no rE-inking nEcESSary the continuous Stamp™ wheel allows you to stamp quickly and accurately anywhere on the page without interrupting the fun to re-ink. designed to fit your hand more comfortably than other stamp wheels on the market, our easy-to-use continuous Stamp™ wheel makes it easy to add distinctive flair to handmade cards, invitations, scrapbook pages, borders, backgrounds and wrapping paper. a wide range of available stamp designs offer the right embellishment for any occasion, and a full rainbow of ink choices coordinate with our other high-density pigment inks to create a perfect harmony of color on all your crafting projects.
choose from a wide variety of stamp designs to add the perfect words, pattern or festive touch to any craft project.
01-0
0570
0 V
acat
ion
Align stamplook through the transparent housing and use the notches built into the base to align the edges of your stamp.
Stamp bordergrip the unit as shown, align your stamp and begin rolling in any direction.
Stamp whole pageUse the notches built into the base to align the next column or row of stamps and repeat as necessary.
Insert cartridge
with ink cartridge cover on top, insert the knobs into the correctly sized notches in the base until they click into place.
Remove stamp sheets from wheelmake sure to remove the stamp sheet from the wheel after use. if stamp sheets are stored on the wheel, they may become unusable.
Center the stampmake sure the stamp sheet is centered on the wheel and not on the edge before use.
Prevent distortionmake sure the stamp sheet is stretched evenly over the wheel to prevent distortion of the designs. Smooth out the stamp at the closure point, and make sure there is some additional slack at the hinge before closing the stamp wheel. once the stamp wheel is closed, smooth out the stamp sheet again.
Be gentlebe careful not to pull too hard when putting on and taking off the stamp sheets to prevent the holes that attach the stamp sheet to the wheel from tearing.
Cleaningto clean, remove the ink cartridge from the wheel and roll the stamp on a piece of paper or over a sponge.
Secure the ink lidmake sure the lid is securely fastened to the ink cartridge to prevent the ink from drying out.
Lock into place
remove the cover and tilt the ink cartridge toward the stamp until it clicks into place.
Select ink level
For light ink, tilt the ink cartridge toward the stamp until it clicks once. medium ink: click twice. dark ink: click three times.
Remove wheel from base
grip each side of the stamp wheel and pull to remove from base. then pull the knobs on each side to open the wheel.
Insert stamp sheet
Select a stamp sheet and hook the holes onto the notches inside the wheel. wrap the stamp sheet around the wheel and hook the holes onto the other side.
Close and lock
close and lock the wheel by pushing the knobs in on each side. replace the wheel in the base.
Stamp bordErS or a wholE pagE
changing StampS
changing ink cartridgES
Continuous Stamp™ WheelEducation
Tips, Tricks and Troubleshooting