boq for building works - engineering...

Engineering Projects (India) Limited(A Government Of India Enterprise)

BILL OF QUANTITIES

DSR Amount (Rs)Item No.

NSRIn Figures In Words In Figures

SUBHEAD NO. I - CARRIAGE OF MATERIAL1 1.1 Carriage of material by mechanical transport including loading, unloading

and stacking1.1 1.1.2 Earth- upto 5 km Cum 8478.01 86.10 Rupees Eighty Six and

Paise Ten Only 729956.66

1.2 1.1.4 Carriage of excavated rock including loading, unloading and stacking as per the instruction of engineer-in-charge Upto 5 km

Cum 7561.01 95.20 Rupees Ninety Five and Paise Twenty Only

719808.15

Total for Sub Head No. I 1449764.81

SUBHEAD NO. II - EARTH WORK

1 2.4 Deduct for not forming with power roller or minimum 8 tonnes for banking excavated earth in layers not exceeding 20cm in depth

Cum 10 1.80 Rupees One and Paise Eighty Only

18.00

2 2.5 Deduct for not watering the excavated earth for banking Cum 10 6.30 Rupees Six and Paise Thirty Only

63.00

3 2.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5m in width as well as 10 spm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed

3.1 2.6.1 All kinds of soil Cum 32182.95 74.40 Rupees Seventy Four and Paise Forty Only

2394411.48

4 2.7 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be leveled and neatly dressed

4.1 2.7.1 Ordinary rock Cum 11184.98 112.40 Rupees One Hundred Twelve and Paise Forty Only

1257191.75

4.2 2.7.2 Hard rock (requiring blasting) Cum 14704.99 264.80 Rupees Two Hundred Sixty Four and Paise Eighty Only

3893881.35

4.3 2.7.3 Hard rock (blasting prohibited) Cum 480 361.80 Rupees Three Hundred Sixty One and Paise Eighty Only

173664.00

for Central University of Karnataka at GulbargaFoundation & Building Works (Package - I) for Construction of Building for various schools including site developments and other works

Rate (Rs.)Sl. No. Description Unit Total Qty

BOQ for Building works 1 of 27 Signature of Contractor with Seal


BILL OF QUANTITIES





5 2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

5.1 2.8.1 All kinds of soil Cum 7889.04 73.40 Rupees Seventy Three and Paise Forty Only

579055.54

6 2.9 Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50m

6.1 2.9.1 Ordinary rock Cum 798.06 165.00 Rupees One Hundred Sixty Five Only

131679.90

6.2 2.9.2 Hard rock (requiring blasting) Cum 145.11 295.60 Rupees Two Hundred Ninety Five and Paise Sixty Only

42894.52

6.3 2.9.2 Hard rock (blasting prohibited) Cum 125 371.80 Rupees Three Hundred Seventy One and Paise Eighty Only

46475.00

7 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Cum 64930.76 44.70 Rupees Forty Four and Paise Seventy Only

2902404.97

8 2.26 Extra for every additional lift of 1.5m or part thereof in.8.1 2.26.1 All kinds of soil Cum 14545 16.30 Rupees Sixteen and

Paise Thirty Only 237083.50

8.2 2.26.2 Ordinary or hard rock Cum 27289.01 29.00 Rupees Twenty Nine Only

791381.29

9 2.27 Supplying and filling in plinth with jejuna river sand under floors including, watering, ramming, consolidating and dressing complete

Cum 4529.96 820.60 Rupees Eight Hundred Twenty and Paise Sixty Only

3717285.18

10 2.28 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m

10.1 2.28.1 All kinds of soil 100Sqm 641.24 437.10 Rupees Four Hundred Thirty Seven and Paise Ten Only

280286.00

11 2.31 Clearing jungle including upcoming of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared

101Sqm 3260 225.80 Rupees Two Hundred Twenty Five and Paise Eighty Only

736108.00



BILL OF QUANTITIES





12 2.33 Felling trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material

12.1 2.33.1 Beyond 30cm girth upto and including 60cm girth Each 20 69.80 Rupees Sixty Nine and Paise Eighty Only

1396.00

12.2 2.33.2 Beyond 60cm girth upto and including 120cm girth Each 20 307.40 Rupees Three Hundred Seven and Paise Forty Only

6148.00

12.3 2.33.3 Beyond 120cm girth upto and including 240cm girth Each 20 1416.30 Rupees One Thousand Four Hundred Sixteen and Paise Thirty Only

28326.00

12.4 2.33.4 Above 240cm girth Each 20 2842.70 Rupees Two Thousand Eight Hundred Forty Two and Paise Seventy Only

56854.00

13 2.34 Supplying chemical emulsion in sealed containers including delivery as specified

13.1 2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% Litre 63886.81 120.60 Rupees One Hundred Twenty and Paise Sixty Only

7704749.29

14 23.2 Supplying and stacking of good earth at site including royalty and carriage upto 1km (earth measured in stacks will be reduced by 20% for payment)

Cum 25807.82 143.30 Rupees One Hundred Forty Three and Paise Thirty Only

3698260.61

Total for Sub Head No. II 28679617.38

SUBHEAD NO. III - CONCRETE WORK

1 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level

1.1 4.1.3 1:2:4 (1 Cement : 2 Coarse sand :4 graded stone aggregate 20mm nominal size)

Cum 85 3012.20 Rupees Three ThousandTwelve and Paise Twenty Only

256037.00


Cum 1795.65 2300.40 Rupees Two Thousand Three Hundred and Paise Forty Only

4130713.26

1.3 4.1.10 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Cum 3536.9 2106.40 Rupees Two Thousand One Hundred Six and Paise Forty Only

7450126.16



BILL OF QUANTITIES





1.4 4.1.11 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

Cum 3 2101.80 Rupees Two Thousand One Hundred One and Paise Eighty Only

6305.40

2 4.2 Providing and laying cement concrete in relating walls, return walls, walls (any thickness) including attached plasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc. upto floor five level, excluding the cost of centering, shuttering and finishing

2.1 4.2.2 1: 11/2:3 (1 Cement : 1 1/2 Coarse sand :3 graded stone aggregate 20mm nominal size)

Cum 4238.02 3643.30 Rupees Three ThousandSix Hundred Forty Three and Paise Thirty Only

15440378.27


Cum 391.34 3281.50 Rupees Three ThousandTwo Hundred Eighty One and Paise Fifty Only

1284182.21


Cum 574.09 2852.60 Rupees Two Thousand Eight Hundred Fifty Two and Paise Sixty Only

1637649.13

3 4.3 Centering and shuttering including strutting, propping etc. and removal of form work for

3.1 4.3.1 Foundations, footings, bases for columns Cum 1143 100.60 Rupees One Hundred and Paise Sixty Only

114985.80

3.2 4.3.2 Retaining walls, return walls, walls (any thickness) including attached plasters, buttresses plinth and string courses fields etc.

Cum 10441.07 162.30 Rupees One Hundred Sixty Two and Paise Thirty Only

1694585.66

4 4.5.1 Providing and fixing precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window stills, shelves, louvers, steps, staircases etc. including hoisting and setting in position with cement mortar 1:3 (1 cement :3 coarse sand) on exposed surfaces complete 1:2:4 (1 cement :2 coarse sand :4 Graded stone aggregate 20mm Nominal Size)

Cum 847 4508.40 Rupees Four Thousand Five Hundred Eight and Paise Forty Only

3818614.80

5 4.6.1 Providing and fixing as or near ground level precast cement concrete in kerb edging etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement :3 coarse sand) including the cost of required centering shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement:3 fine sand) on exposed surfaces complete



BILL OF QUANTITIES





1:2:4 (1cement: 2coarse sand:4 graded stone aggregate 20mm of nominal size

Cum 133 3864.60 Rupees Three ThousandEight Hundred Sixty Four and Paise Sixty Only

513991.80

6 4.10 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 12.5mm nominal size)

Sqm 3113.92 137.80 Rupees One Hundred Thirty Seven and Paise Eighty Only

429098.18

7 4.12 Extra for providing and mixing water proofing material in cement concrete work @ 1kg per 50kg of cement

per 50 kg 866.15 21.80 Rupees Twenty One and Paise Eighty Only

18882.07

8 4.13 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil

Sqm 3113.92 51.70 Rupees Fifty One and Paise Seventy Only

160989.66

9 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth

Sqm 4169 257.50 Rupees Two Hundred Fifty Seven and Paise Fifty Only

1073517.50

Total for Subhead No. III 38030056.90

SUBHEAD NO. IV - REINFORCEMENT CEMENT CONCRETE

1 5.1 Providing and laying in position specified grade or reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work upto plinth level

1.1 5.1.2 1:1,5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Cum 83 3438.40 Rupees Three ThousandFour Hundred Thirty Eight and Paise Forty Only

285387.20

2 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size)

Cum 25 3381.30 Rupees Three ThousandThree Hundred Eighty One and Paise Thirty Only

84532.50



BILL OF QUANTITIES





3 5.33 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg. of cement per cum of concrete. All work upto plinth level

Cum 11453.94 4189.20 Rupees Four Thousand One Hundred Eighty Nine and Paise Twenty Only

47982845.45

4 5.33A Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without imparting strength and durability as per direction of Engineer-in-charge. M-25 grade reinforced cement concrete by using 380kg.of cement per cum of concrete. All work upto floor V level

Cum 22600.08 4317.90 Rupees Four Thousand Three Hundred Seventeen and Paise Ninety Only

97584885.43

5 5.15 Providing, hoisting and fixing upto floor five level precast reinforced cement in lintels, beams and bressumers including setting in cement mortar 1:3 (1 cement :3 coarse sand), cost of required centering and shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)

Cum 13.99 4752.30 Rupees Four Thousand Seven Hundred Fifty Two and Paise Thirty Only

66484.68

6 5.9 Centering and shuttering including strutting, propping etc. and removal of form for

6.1 5.9.1 Foundations, footings, bases of columns etc. for mass concrete Sqm 11927.88 119.70 Rupees One Hundred Nineteen and Paise Seventy Only

1427767.24

6.2 5.9.2 Walls (any thickness) including attached plasters, buttresses, plinth and string courses etc.

Sqm 22124.97 180.40 Rupees One Hundred Eighty and Paise Forty Only

3991344.59

6.3 5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 65968.98 175.90 Rupees One Hundred Seventy Five and Paise Ninety Only

11603943.58

6.4 5.9.4 Shelves (Cast in situ) Sqm 230.06 224.90 Rupees Two Hundred Twenty Four and Paise Ninety Only

51740.49

6.5 5.9.5 Lintels, beams, plinth beams, graders, bressumers and cantilevers Sqm 66123.26 216.70 Rupees Two Hundred Sixteen and Paise Seventy Only

14328910.44



BILL OF QUANTITIES





6.6 5.9.6 Columns, pillars, piers, Abutments, posts and struts Sqm 47725.02 234.80 Rupees Two Hundred Thirty Four and Paise Eighty Only

11205834.70

6.7 5.9.7 Stairs (excluding landings) except spiral staircases Sqm 3964.99 224.90 Rupees Two Hundred Twenty Four and Paise Ninety Only

891726.25

6.8 5.9.14 Extra for shuttering in circular work (20% of respective centering and shuttering items)

Sqm 6306.09 49.00 Rupees Forty Nine Only 308998.41

6.9 5.9.15 Small lintels not exceeding 1.4m clear span, moulding as in cornices, window sills, string courses, bands, copings, bed plates, anchor blocks and the like

Sqm 2832.99 123.30 Rupees One Hundred Twenty Three and Paise Thirty Only

349307.67

6.10 5.9.13 Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards

Sqm 120 287.40 Rupees Two Hundred Eighty Seven and Paise Forty Only

34488.00

6.11 5.9.16 Edges of slabs and breaks in floors and walls6.11.1 5.9.16.1 Under 29 cm wide Metre 23402.11 73.40 Rupees Seventy Three

and Paise Forty Only 1717714.87

6.12 5.9.19 Weather shade, chajjas, corbels etc. including edges Sqm 125 225.80 Rupees Two Hundred Twenty Five and Paise Eighty Only

28225.00

7 5.11 Extra for additional height in centering, shuttering wherever required with adequate bracing, propping etc. including cost of de-shuttering and decent ring at all levels, over a height of 3.5m, for every additional height of 1 metre of part thereof (plan area to be measured)

7.1 5.11.1 Suspended floors, roofs, landing, beams and balconies (plan area to be measured)

Sqm 8636.99 93.40 Rupees Ninety Three and Paise Forty Only

806694.87

8 5.18 Providing pre cast, cement concrete jali 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement :3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits

8.1 5.18.1 50mm thick Sqm 125 342.80 Rupees Three Hundred Forty Two and Paise Eighty Only

42850.00

9 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Upto plinth level

9.1 5.22.6 Thermo-Mechanically Treated Bars Kg 1407624.53 47.00 Rupees Forty Seven Only

66158352.91

10 5.22A Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Above plinth level



BILL OF QUANTITIES





10.1 5.22A.6 Thermo-Mechanically Treated Bars Kg 2749640.68 47.00 Rupees Forty Seven Only

129233111.96

11 5.28 Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS:1838 including cost of primer, sealing compound in expansion joints.

per cm depth per

100m

1357 589.40 Rupees Five Hundred Eighty Nine and Paise Forty Only

799815.80

Total for Subhead No. IV 388984962.04

SUBHEAD NO. V - BRICK WORK

1 6.15 Extra for providing and placing in position 2 nos. 6mm dia M.S. bars at every third course of half brick masonry (with F.P.S. bricks)

Sqm 3956.01 50.80 Rupees Fifty and Paise Eighty Only

200965.31

Total for Subhead No. V 200965.31

SUBHEAD NO. VI - STONE WORK

1 7.1 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 coarse sand:12 graded stone aggregate 20mm nominal size) at plinth level with

1.1 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 1449.03 1859.70 Rupees One Thousand Eight Hundred Fifty Nine and Paise Seventy Only

2694761.09

2 7.7 Coursed rubble masonry (second soft) with hard stone in foundation & plinth with

2.1 7.7.1 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 780.04 1967.60 Rupees One Thousand Nine Hundred Sixty Seven and Paise Sixty Only

1534806.70

3 7.23 Stone work (machine cut edges) for wall lining etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade (To be secured to the backing by means of cramps which shall be paid for separately)

3.1 7.23.4 White sand stone - exposes face machine cut and table rubbed with rough backing



BILL OF QUANTITIES





3.2 7.23.4.3 50mm thick Sqm 1270.99 1447.20 Rupees One Thousand Four Hundred Forty Seven and Paise Twenty Only

1839376.73

Total for Subhead No. VI 6068944.52

SUBHEAD NO. VII - MARBLE WORK

1 8.2 Providing and fixing 18mm thick gang saw cut mirror polished pre-moulded and pre-polished) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement :4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high glass finish etc. complete at all levels.

1.1 8.2.2 Granite of any colour and shade1.2 8.2.2.2 Area of slab over 0.50 sqm Sqm 4559.02 2022.10 Rupees Two Thousand

Twenty Two and Paise Ten Only

9218794.34

2 8.3 Extra for providing edge moulding to 18mm thick marble stone counters, vanities etc. including machine polishing to edge to give high glass finish etc. complete as per design approved by Engineer-in-charge

2.1 8.3.2 Granite work Metre 18297.65 80.70 Rupees Eighty and Paise Seventy Only

1476620.36

3 8.4 Corresponding basic item, in fascia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc. complete

Metre 17534.10 107.00 Rupees One Hundred Seven Only

1876148.70

4 8.5 Extra for providing opening or required size & shape for wash basins / kitchen sink in kitchen platform, vanity counters and similar location in marble / Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete

Each 374 160.50 Rupees One Hundred Sixty and Paise Fifty Only

60027.00

5 8.7 Providing and fixing cramps of required size & shape in RCC /CC backing with cement mortar 1:2 (1 cement :2 coarse sand) including drilling necessary hole in stones and embedding the cramp in the hold (fastener to be paid separately)

5.1 8.7.1 Gunmetal cramps Kg 770 538.60 Rupees Five Hundred Thirty Eight and Paise Sixty Only

414722.00



BILL OF QUANTITIES





5.2 8.7.2 Stainless steel cramps Kg 1030 501.40 Rupees Five Hundred One and Paise Forty Only

516442.00

6 8.8 Providing and fixing expansion hold fasteners on C.C / R.C.C surface backing including drilling necessary holes and the cost of bolt etc. complete

6.1 8.8.1 Wedge expansion type6.1.1 8.8.1.1 Fastener with threaded dia 6 mm Each 640 13.60 Rupees Thirteen and

Paise Sixty Only 8704.00

6.1.2 8.8.1.2 Fastener with threaded dia 10 mm Each 2570 15.40 Rupees Fifteen and Paise Forty Only

39578.00

6.1.3 8.8.3 Fastener with threaded dia 12 mm Each 3000 26.30 Rupees Twenty Six and Paise Thirty Only

78900.00

7 8.10 Providing and fixing stone slab table rubbed edges rounded and polished of size 75x50 cm deep and 1:8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth

7.1 7.10.2 Granite stone of approved shade Each 321 2047.40 Rupees Two Thousand Forty Seven and Paise Forty Only

657215.40

Total for Subhead No. VII 14347151.80

SUBHEAD NO. VIII - WOOD AND PVC WORK

1 9.24 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)

1.1 9.24.1 Rectangular or square Sqm 370 138.70 Rupees One Hundred Thirty Eight and Paise Seventy Only

51319.00

2 9.48 Providing and fixing M/S. grills of required pattern in frames of windows etc. with M.S. flats square or round bars etc. all complete

2.1 9.48.2 Fixed to openings / wooden frames with rawl plugs screws etc. Kg 51329.92 64.40 Rupees Sixty Four and Paise Forty Only

3305646.85



BILL OF QUANTITIES





3 9.53 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size)

No 6581.99 63.50 Rupees Sixty Three and Paise Fifty Only

417956.37

4 9.96 Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

4.1 9.96.2 250x16 mm Each 964 154.10 Rupees One Hundred Fifty Four and Paise Ten Only

148552.40

5 9.97 Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete

5.1 9.97.4 150x10mm Each 492 34.50 Rupees Thirty Four and Paise Fifty Only

16974.00

6 9.100 Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete

6.1 9.100.2 100mm Each 954 29.00 Rupees Twenty Nine Only

27666.00

7 9.101 Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC - 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete

7.1 9.101.2 Twin rubber stopped Each 10 67.10 Rupees Sixty Seven and Paise Ten Only

671.00

8 9.103 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality)

Each 10 969.30 Rupees Nine Hundred Sixty Nine and Paise Thirty Only

9693.00

9 9.121 Providing and fixing fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mm x 15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided all the bottom to steady the frame

Metre 2892 381.70 Rupees Three Hundred Eighty One and Paise Seventy Only

1103876.40



BILL OF QUANTITIES





10 9.122 Providing and fixing to existing door frames10.1 9.122.2 30mm thick fiberglass reinforced plastic (F.R.P) flush door shutter in

different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF) / Polystyrene foam to be used as filler material throughout the hollow panel, cast monolithically with testing parameters of F.R.P laminate conforming to table -3 of IS 14856:2000, complete as per direction of Engineering - in-charge

Sqm 821.88 1881.50 Rupees One Thousand Eight Hundred Eighty One and Paise Fifty Only

1546367.22

Total for Subhead No. VIII 6628722.24

SUBHEAD NO. IX - STEEL WORK

1 10.5 Providing and fixing 1mm thick M.S sheet door with frame of 40x40x6mm angle iron and 3mm M/S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer

1.1 10.5.1 Using M.S. angle 40x40x6mm for diagonal braces Sqm 5 1743.70 Rupees One Thousand Seven Hundred Forty Three and Paise Seventy Only

8718.50

2 10.25 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

2.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Kg 155177.94 56.20 Rupees Fifty Six and Paise Twenty Only

8721000.23

Total for Subhead No. IX 8729718.73

FLOORING WORK

1 11.20 Chequererred precast cement concrete tiles 22m thick in footpath & courtyard jointed with neat cement slurry mixed with pigments to math the shade of tiles including rubbing and cleaning etc. complete on 20mm thick Bed of cement mortar 1:4 (1 cement : 4 coarse sand)

SUBHEAD NO.



BILL OF QUANTITIES





1.1 11.20.2 Medium shade using 50% white cement 50% Grey Sqm 6722 493.30 Rupees Four Hundred Ninety Three and Paise Thirty Only

3315962.60

2 11.3 Cement concrete flooring 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate) finished with a floating cost of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete

2.1 11.3.1 40mm thick with 20mm nominal size stone aggregate Sqm 804.05 180.40 Rupees One Hundred Eighty and Paise Forty Only

145050.62

3 11.26 Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

3.1 11.26.1 25mm thick Sqm 56406.92 807.00 Rupees Eight Hundred Seven Only

45520384.44

4 11.27 Kota stone slabs 25mm thick in risers of steps skirting, dado and pillars laid on 12mm (average thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete

Sqm 3844.07 811.50 Rupees Eight Hundred Eleven and Paise Fifty Only

3119462.81

5 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

5.1 11.41.2 Size of Tile 60x60 cm Sqm 856 859.60 Rupees Eight Hundred Fifty Nine and Paise Sixty Only

735817.60

6 11.31 Extra for pre finished nosing in treads of steps of Kota stone / sand stone slab

Metre 9122.88 34.50 Rupees Thirty Four and Paise Fifty Only

314739.36

7 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Sqm 10840.97 593.90 Rupees Five Hundred Ninety Three and Paise Ninety Only

6438452.08



BILL OF QUANTITIES





8 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as white, ivory. Grey, Fume red brown, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete

Sqm 3173 568.50 Rupees Five Hundred Sixty Eight and Paise Fifty Only

1803850.50

9 11.38 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete

Sqm 3450.23 567.60 Rupees Five Hundred Sixty Seven and Paise Sixty Only

1958350.55

Total for Subhead No. X 63352070.56

SUBHEAD NO. XI - ROOFING WORK

1 12.22 Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement rounding the edge sand making and finishing the outlet complete.

Each 603 117.90 Rupees One Hundred Seventeen and Paise Ninety Only

71093.70

2 12.41 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion (I) single socketed pipes

2.1 12.41.2 110 mm dia meter Metre 6062.97 133.30 Rupees One Hundred Thirty Three and Paise Thirty Only

808193.90

3 12.42 Providing and fixing on wall face unplasticised Rigid PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion

3.1 12.42.5 Bend 87.5"3.1.1 12.42.5.2 110 mm bend Each 657 107.00 Rupees One Hundred

Seven Only 70299.00

3.2 11.42.6 Shoe (plain)3.2.2 12.42.6.2 110mm shoe Each 657 209.50 Rupees Two Hundred

Nine and Paise Fifty Only

137641.50



BILL OF QUANTITIES





4 12.43 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs screwed with M/S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete

4.3 12.43.2 110mm Each 1935 98.80 Rupees Ninety Eight and Paise Eighty Only

191178.00

5 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams

Each 1209 19.00 Rupees Nineteen Only 22971.00

6 12.5 Providing & fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Sqm 370 354.50 Rupees Three Hundred Fifty Four and Paise Fifty Only

131165.00

7 12.51 Providing and fixing pre-coated galvanized steel sheet roofing accessories 0.50 mm +/-5% total coated thickness (TCT), Zinc Coating 120gms as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I seam bolts and nuts, G.I. plain and bitumen washers complete

7.1 12.51.1 Ridges plain (500-600mm) Rm 25 367.20 Rupees Three Hundred Sixty Seven and Paise Twenty Only

9180.00

7.1.1 12.51.6 Gutter (600mm over all girth) Rm 50 432.50 Rupees Four Hundred Thirty Two and Paise Fifty Only

21625.00

Total for Subhead No. XI 1463347.10

SUBHEAD NO. XII - FINISHING WORK



BILL OF QUANTITIES





1 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix

1.1 13.7.2 1:4 (1 cement : 4 fine sand) Sqm 64976.98 100.60 Rupees One Hundred and Paise Sixty Only

6536684.19

2 13.1 12mm cement plaster of mix2.1 13.1.2 1: 6 ( 1 cement :6 fine sand) Sqm 2641 72.50 Rupees Seventy Two

and Paise Fifty Only 191472.50

3 13.12 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge

Sqm 64921.07 123.30 Rupees One Hundred Twenty Three and Paise Thirty Only

8004767.93

4 13.16 6mm cement plaster of mix4.1 13.16.1 1:3 (1 cement : 3 fine sand) Sqm 113726.06 61.70 Rupees Sixty One and

Paise Seventy Only 7016897.90

5 13.21 Extra for providing and mixing water proofing material in cement plaster per bag of work in proportion recommended by the manufacturers.

per bag of 50kg

cement used

155.99 22.70 Rupees Twenty Two and Paise Seventy Only

3540.97

6 13.26 Providing and applying plaster of Paris putty of 2mm thickness over plastered surface to prepare to the surface even and smooth complete

Sqm 55755.01 49.90 Rupees Forty Nine and Paise Ninety Only

2782175.00

7 13.28 12mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand)

7.1 13.28.3 Raised Band cm per meter

1630 1.80 Rupees One and Paise Eighty Only

2934.00

8 13.41 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

8.1 13.41.1 New work (two or more coats) over and including priming coat with cement primer

Sqm 78873.63 47.20 Rupees Forty Seven and Paise Twenty Only

3722835.34

9 13.44 Finishing walls with water proofing cement paint of required shade 9.1 13.44.1 New work (two or more coats applied @ 3.84 kg / 10 sqm) Sqm 11935 55.30 Rupees Fifty Five and

Paise Thirty Only 660005.50

10 13.47 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.

10.1 13.47.1 New work (Two or more coats applied @ 1.43 ltr/ 10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).

Sqm 10781.87 75.30 Rupees Seventy Five and Paise Thirty Only

811874.81

11 13.50 Applying priming coat 11.1 13.50.1 With ready mixed pink or Grey primer of approved brand and manufacture

on wood work (hard and soft wood)Sqm 6130 19.00 Rupees Nineteen Only 116470.00



BILL OF QUANTITIES





11.2 13.50.3 With ready mixed red oxide zing chromate primer of approved brand and manufacture on steel galvanized iron / steel works

Sqm 6002.56 17.20 Rupees Seventeen and Paise Twenty Only

103244.03

12 13.48 Finishing walls with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications

12.1 13.48.2 Painting wood work with Deluxe Multi Surface paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand or manufacture

Sqm 6130 50.80 Rupees Fifty and Paise Eighty Only

311404.00

13 13.60 Approved brand and manufacture to give an even shade 13.1 13.60.1 Two or more coats on new work Sqm 64387.53 39.00 Rupees Thirty Nine

Only 2511113.67

14 13.61 Painting with synthetic enamel paint of approved brand and manufacture to given an even shade

14.1 13.61.1 Two or more coats on new work Sqm 9543.54 38.10 Rupees Thirty Eight and Paise Ten Only

363608.87

15 13.76 Forming groove of uniform size 12 x 12mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Metre 2617 13.60 Rupees Thirteen and Paise Sixty Only

35591.20

Total for Subhead No. XII 33174619.91

SUBHEAD NO. XIII - REPAIRS TO BUILDINGS

1 14.6 Renewing glass panes, with wooden fillets wherever necessary1.1 14.6.2 Float glass panes of thickness 5.50 mm Sqm 437 560.40 Rupees Five Hundred

Sixty and Paise Forty Only

244894.80

Total for Subhead No. XIII 244894.80

SUBHEAD NO. XIV - WATER PROOFING

1 22.3 Providing an laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of

(I) 1st course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface

(ii) Kind course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface



BILL OF QUANTITIES





(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 Kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)

Sqm 5888.05 268.40 Rupees Two Hundred Sixty Eight and Paise Forty Only

1580352.62

2 22.7 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment.b) Laying brick bats with mortar using broken bricks / brick bats 25mm to 115mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge over 20mm thick layer of cement mortar of mix 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS:2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs.

c) After two days of proper curing applying a second coat of cement slurry using 2.75kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

2.1 22.7.1 With average thickness of 120mm and minimum thickness at Khurra as 65mm

Sqm 30797.99 516.80 Rupees Five Hundred Sixteen and Paise Eighty Only

15916401.23

Total for Subhead No. XIV 17496753.85

SUBHEAD NO. XV - NON SCHEDULE ITEMS - CIVIL



BILL OF QUANTITIES





1 NSR Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL ANTI-termite treatment and creating a continuous chemical barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid surroundings of pipes & conduits etc. complete as per specifications - chlorpyriphos emulsifiable concentrate 20% with 1.0% concentration as per IS 6313

Sqm 30820.99 68.00 Rupees Sixty Eight Only

2095827.32

2 NSR Providing and fixing both side polished cuddapah slab 25mm thick including rubbing and polishing etc. complete. (For cupboards)

Sqm 115 473.30 Rupees Four Hundred Seventy Three and Paise Thirty Only

54429.50

3 NSR Brick work with flyash F.P.S. brick of class designation 75 in superstructure above plinth level upto floor five level in

3.1 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 18113.28 2866.20 Rupees Two Thousand Eight Hundred Sixty Six and Paise Twenty Only

51916283.14

4 NSR Brick work with flyash F.P.S. brick of class designation 75 upto plinth level

4.1 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2294.65 3143.70 Rupees Three ThousandOne Hundred Forty Three and Paise Seventy Only

7213691.21

5 NSR Half Brick work with flyash F.P.S. brick of class designation 75 in cement mortar 1:4 (1cement:4 sand) including scaffolding and curing etc complete as per specification. in superstructure above plinth level upto floor five level

5.1 Cement mortar 1:4 (1 cement : 4 sand) Sqm 4616.01 382.60 Rupees Three Hundred Eighty Two and Paise Sixty Only

1766085.43

6 NSR Providing and laying in skirting fully vitrified tiles of thickness not less than 8mm of approved size of premium quality make of Johnson/ Regency/ Naveen tiles of approved colour and design laid on 12mm thick cement mortar 1:3 (one cement : three coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete (100mm height)

6.1 Light shade using white cement RM 388.86 63.50 Rupees Sixty Three and Paise Fifty Only

24692.61



BILL OF QUANTITIES





7 NSR Providing and laying brick aggregate cement concrete 1:5:10 (1 cement : 5 sand : 10 brick aggregate ) with 40mm brick aggregate to a required depth and filling layers of 150mm each in toilets (sunken floor) at all levels with contractor's material, labour, tools and plants including lead and lifts etc as per the directions of the Engineer-in-charge

Cum 1770.89 2082.80 Rupees Two Thousand Eighty Two and Paise Eighty Only

3688409.69

8 NSR Supplying & fixing PVC corner beading for toilets as per standard (size 7mm or 10mm) specification

Metre 4890 87.00 Rupees Eighty Seven Only

425430.00

9 NSR Supplying, fabricating & fixing of Staircase railing with 50mm dia & 3mm thick Stainless Steel pipe (304 grade) bent to shape and alignment & welded with necessary legs / base plate including all necessary site welding, labour, material, transportation, grinding and polishing etc. complete

Kg 52167.06 473.30 Rupees Four Hundred Seventy Three and Paise Thirty Only

24690669.50

10 NSR Providing and laying vitrified floor tiles (300mm x 300mm) - Unpolished finish (for toilets) in different sizes with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete

Sqm 2161.99 844.20 Rupees Eight Hundred Forty Four and Paise Twenty Only

1825151.96

11 NSR Providing and laying hollow clay tiles for roofing 300x150x50mm on roofs jointed with cement mortar 1:4 (1 cement :4 coarse sand ) mixed with 2% integral water proofing compound laid over a bed of 20mmthick cement mortar 1:4 ( 1 cement : 4 coarse sand) and finished.

Sqm 30333.99 516.80 Rupees Five Hundred Sixteen and Paise Eighty Only

15676606.03

12 NSR Supplying and fixing of 24 gauge Chicken mesh including necessary nails for RCC / Masonry joints including labour charges etc., at all levels and locations, including preparing surfaces and as per drawings, specifications and as directed by Engineer-in- charge.

Sqm 10466.09 53.50 Rupees Fifty Three and Paise Fifty Only

559935.82

13 NSR Finishing exterior walls with textured finish of required pattern including all materials, scaffolding and curing etc as per specifications and as directed by Engineer-in-charge. ( The rate excluding the top coat of painting )

Sqm 8123.89 196.80 Rupees One Hundred Ninety Six and Paise Eighty Only

1598781.55

14 NSR Providing and laying of Granite stone in treads of steps and risers using single length upto 2m with 18mm thick Granite stone (sample of Granite approved by Engineer-in-charge) over 20mm (average) thick base of CM 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including engraving 3 nos of grooves on granite stone to the length of steps, rubbing, polishing and bull nosing complete etc. complete as per standard specification and as directed by Engineer-in-Charge

Sqm 444.99 2297.70 Rupees Two Thousand Two Hundred Ninety Seven and Paise Seventy Only

1022453.52



BILL OF QUANTITIES





15 NSR Providing and laying of 18mm thick pre-polished jet black granite slab in floors of approved quality over a bed of CM 1:4 mix, 20mm thick grouting the joints with white cement except 4mm depth from top and same filled with epoxy grout filler etc., complete. The tile junction joints shall be etc., complete. The tile junction joints shall be uniformly maintained with 4mm spacers (epoxy) grouting and spacer arrangement work shall be paid separately) and as directed by Engineer-in-charge

Sqm 6716.11 1740.10 Rupees One Thousand Seven Hundred Forty and Paise Ten Only

11686703.01

16 NSR Providing Epoxy grouting approved make at the junction of vitrified tiles / ceramic tiles / polished granites joints to a thickness of 4 mm x 4mm as per approved colour matching with floor / wall tiles etc. including all lablour etc. complete the above job includes the provision of 4mm thick spacer at all junction points as per standards and as directed by Engineer-in-charge

RM 42320 56.20 Rupees Fifty Six and Paise Twenty Only

2378384.00

17 NSR Supplying and laying of 20mm thick pre-finished colour cement tiles over a base of CM 1: 4 mix 20mm thick etc. as per standards and as directed by engineer-in-charge

Sqm 100 664.60 Rupees Six Hundred Sixty Four and Paise Sixty Only

66460.00

18 NSR Post tensioning for beams as per standard specification including all materials, labour, conveyance etc complete

Sqm 516 1089.00 Rupees One Thousand Eighty Nine Only

561924.00

19 NSR Providing & fixing pvc 110mm dia terminal guard- vent cowl Sqm 25 157.80 Rupees One Hundred Fifty Seven and Paise Eighty Only

3945.00

Pressed Steel Door20 NSR Supplying and fixing of pressed steel Door frame from 1.20mm (18 Gauge)

thick galvanized steel sheet formed to single rebate profile of size 175x75 mm finished with necessary approved paining including cost of accessories such as all clamps anchor fasteners in RCC surface if necessary etc. complete including cost of all labour, scaffolding charges etc. complete door frames may be built into the brick or block walls using corrugated "TEE" anchors not welded to the frames (first fix). Frames may also be fixed on plastered openings with help of anchor fasteners (second fix) etc. complete and as per manufacturers specification and as directed by Engineer-in-charge

RM 6491.85 315.50 Rupees Three Hundred Fifteen and Paise Fifty Only

2048178.68

Flush Shutter21 NSR Supplying and fixing of factory made (Kutty or equivalent make) flush door

shutters of 38mm thick with 12mm thick teak wood edge beading and with both side Teak Veneer hot pressed, bonded with liquid phenol formaldehyde resin with approved shade including the cost of accessories such as door closer , hinges, handle, lock and screws & vision panel, S.S. panel cladding etc. (Dorma or equivalent) including cost of all materials and labour, scaffolding charges etc. complete and as directed by Engineer-in-Charge

Sqm 2676.91 1972.20 Rupees One Thousand Nine Hundred Seventy Two and Paise Twenty Only

5279401.90



BILL OF QUANTITIES





22 NSR Supplying and fixing of Mosquito proof windows and ventilator made out of Aluminum powder coated Shutter frame size: 31mmx14mm, Outer frame size: 40mmx 26mm or 31x13mm or 32x18mm and magnetic strips, brush and mesh are inserted with special gasket. The corners of window frames are all crimped with lock. Hinges and handles are made of aluminum powder coated. Mesh size: 18x18 sq.inch Make: Aluminium Mesh, Black or Grey colour, including all material, labour and transportation etc.

Sqm 36.02 3225.30 Rupees Three ThousandTwo Hundred Twenty Five and Paise Thirty Only

116175.31

Wall Paneling23 NSR Providing and supplying Armstrong 'Optra Acoustical Wall Paneling' with

Square edges made of fibre glass substrate 25 mm thick and wrapped on the front side an acoustically transparent and fire resistant fabric with an option of colours as per the choice of the architect / person in-charge of size 2100x600x25mm providing a minimum sound absorption level of 0.90 supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. Armstrong impalers of adequate quantity as specified by the manufacturer shall be fixed to the wall surface using self tapping screws. Silica based construction adhesive shall be dabbed on to the projecting elements (Spikes) of the impalers. Armstrong Optra wall panels shall be pierced through the spikes of the impalers ensuring the line and level of the panels are maintained.

Sqm 1164.01 3454.70 Rupees Three ThousandFour Hundred Fifty Four and Paise Seventy Only

4021305.35

False Ceiling24 Providng and fixing armstrong pre coated (exposed portion only) GIT grid

system in 600x600mm module which includes providing and fixing wall angle along the perimetre of the room with help of wooden plug and wooden screws at 300mm centres then suspending the main tee of the sizefrom the roof with the help of 4mm rod one side with metal fastener and other side with J bolt connected with main T at 1200mm c/c . 1200mm cross tee is then interlocked into the pre-cut slots in the main tees at 600mm centers in direction perpendicular to the main tee to make a grid of 600x1200mm. finally 600mm cross tees are then interlocked into the pre-cut slots inthe 1200 mm tees at 600mm centres and in direction parallel to the main tee cross tees having length more than 600mm are to supported independently, 16mm thick amstrong fine fissure square edge tile-16mm thick tiles of size 595x594 mm shall be placed into the grid size of 600x600 mm]

Sqm 788 621.10 Rupees Six Hundred Twenty One and Paise Ten Only

489426.80

Galvanized Steel door (Acoustic door)



BILL OF QUANTITIES





25 Supplying and fixing of factory made galvanized steel (Acoustic) door using Shakti-met door or equivalent approved section with door outer frame of size 100 x 57mm (formed from 1.2mm thick G.S sheet) and shutter section of 46 mm thick fully (formed from 0.80mm thick G.S sheet), double skin shutter shell with lock seam joints at style edges in-fill with PUF (Polyurethane foam) honeycomb Kraft paper vision panel of 5mm thick glass and shutter skin shall be finish with hair line finish, excluding accessories such as door closer, hinges, handle, lock and screws etc. (Dorma or equivalent) including cost of all materials and labour, scaffolding charges etc., complete and as per drawing no:ESIC\STD\CI\112 specification and as directed by Engineer-in-charge. (Double leaf door)

Sqm 34 2366.60 Rupees Two Thousand Three Hundred Sixty Six and Paise Sixty Only

80464.40

26 NSR Providing & fixing Aluminium Louvers Sqm 689 1972.20 Rupees One Thousand Nine Hundred Seventy Two and Paise Twenty Only

1358845.80

27 NSR Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150 degree, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement Coarse sand : 3 Graded aggregate 20mm nominal size)

Cum 109 3643.30 Rupees Three ThousandSix Hundred Forty Three and Paise Thirty Only

397119.70

28 NSR Providing and fixing weep holes of 50mm dia PVC pipe in retaining walls as per drawing

Each 1470 78.90 Rupees Seventy Eight and Paise Ninety Only

115983.00

29 NSR Providing and fixing 4 mm thick aluminium composite panel (of approved colour / shade) for exterior wall cladding at all levels and height with water tight and air-tight system either curved or straight in plan. The aluminium composite panel to be fixed with extruded aluminium basic frame or CRCA from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per relevant IS code quality, galvanized as per relevant IS code with zinc of 120 GM / Sq. Mtr.) (approx. basic frame weight 6 kg/sqm) angle cleats, rivets, G.I. brackets all as approved using suitable hitli / fisher / anchor bolts on RCC/Structural works including necessary accessories complete in all respects as per specifications and as directed by engineer- in- charge. Item includes cost of Aluminium Frames, ACP panel, weather sealant (White / Black colour), Gasket, Foam, scaffolding, fixtures all machineries and all taxes.

Sqm 510 2366.60 Rupees Two Thousand Three Hundred Sixty Six and Paise Sixty Only

1206966.00

The above work is to be carried out by a specialized manufacturer approved by the engineer-in-charge. The cost includes all material, labour and others items required to complete the work in totality.



BILL OF QUANTITIES





30 NSR Providing and fixing of color anodized aluminium stick glazing type structural glazing system using aluminium extruded box section 100x 57 mm2.16kg /meter vertical and horizontal an Additional horizontal sections for expansion joints of frame 64mm x 57mm 1.6 kg /meter of work fabricated with special U and L shaped cleats bolted with section to make sizes & designs given by you and fixing it including 8 mm toughened clear glass bonding tape 3m VHP double side bonding tape using silicon dow corning structural sealant 995 and Weather sealant 789 in all respects – all completed Rate including all material and labour transportation etc., complete

Sqm 37 5761.50 Rupees Five Thousand Seven Hundred Sixty One and Paise Fifty Only

213175.50

Total for Subhead No. XV 142582905.73

SUBHEAD NO. XVI - NON SCHEDULE ITEMS

BORE WELL1 NSR Providing and constructing bore well of 165mm dia & 300 meter depth

including providing and fixing PVC casting pipes of approved quality 165mm internal dia including accessories, labour tools and required equipment etc. complete

1.1 Identifying the point for drilling the bore well No 6 1632.20 Rupees One Thousand Six Hundred Thirty Two and Paise Twenty Only

9793.20

2 NSR Providing fixing 160mm dia PVC casting pipes confirming to IS in bore well to a required depth etc. complete

RM 1800 547.70 Rupees Five Hundred Forty Seven and Paise Seventy Only

985860.00

3 NSR Testing of water samples, as directed by engineers/ consultant No 6 20401.90 Rupees Twenty Thousand Four Hundred One and Paise Ninety Only

122411.40

4 NSR Supplying and fixing heavy duty clamp of size 900 mm x 100mm x 15mm with bolts and nuts etc. complete

Pair 24 510.50 Rupees Five Hundred Ten and Paise Fifty Only

12252.00

5 NSR Providing and fixing top cap of PVC Dummy suitable for 165mm dia nominal bore pipe etc. complete

No 6 306.50 Rupees Three Hundred Six and Paise Fifty Only

1839.00



BILL OF QUANTITIES





Submersible pump set in tube well6 Design, supply and installation of submersible pump sets of 3 phase

electric motor frame with coupling guard and it's fasteners, and pumping water from bore well including providing, laying jointing 65mm dia GI pipe\"C\" class confirmed as per relevant IS code pump shall be installed at a depth of 65m from ground level and delivery pipe shall be left 1.50m above ground level. Rate to include cost of pump sets, GI pipes with in the bore well, 3 core x 4sqmm electric cable, star delta starter, single phase preventer, dry running preventer, outer door type electrical panel board, start & stop bush button, voltmeter Ampere meter, etc., provision for the maintenance of the pumps, chain block with pulley etc. complete. The supplier shall give one year guarantee, complete as specified and directed by Engineer's / consultant

Each 5 263592.20 Rupees Two Lakhs Sixty Three Thousand Five Hundred Ninety Two and Paise Twenty Only

1317961.00

Make: KSB/ Texmo / Kirloskar / Suguna or equivalentHP. Suitable HP for considering the capacity & Head of pump setsCapacity, 625 lpmNominal speed : 2900 rpmMaterial of constructionBody: CIImpeller: Stainless steelStator: SteelRotor: SteelShaft: Stainless steelCentrifugal pump sets (Submersible, monoblock type) for pumping water from Domestic water collection sump to common over head tank

NSR



BILL OF QUANTITIES





7 NSR Design, Supply, installation,commissioning and testingof submersible centrifugal pumpsets (monoblock type) horizontally split with bronze impeller stainless steel shaft, mounted on a common base plate directly coupled through the setup flexible coupling with a suitable capacity induction motor for operation on 440volts and 50Hz, three phase AC power supply class 'F' insulation of capacity 7.50 lps against a total head of 30 m of water column including suitable electrical panel board and suitable size of required cables, start stop bush button, voltmeter, Amper meter, single phase preventer, dry running preventer etc complete.The cost include for the purpose of maintenance for pumpsets, chainblock with pulley with necessary accessories etc.The supplier shall be give one year guarantee, supply minimum spares from one year period etc. complete as specified and directed by Engineer's Representatives.Make: kirloskar or equivalent

Each 2 121391.20 Rupees One Lakh Twenty One Thousand Three Hundred Ninety One and Paise Twenty Only

242782.40

HP: Suitable HP for considering the capacity & head of pump setsb) Pressure gauge with brass cock - 1 No.c) Standard foundation as per manufactures specificationsd) RPM - 1450 RPMe) Insulation - Class 'F'Material of constructionImpeller : BronzeDelivery Casting: Cast ironMotor body: Cast ironShaft: Stainless steelShaft sleeve : Chrome steelSewage pump sets

8 NSR Design, supplying, Installation, commissioning and testing of submersible pump sets with 3 phase electric motor (1450 Rpm) for pumping of sewage Containing solids of maximum size 50mm with 100mm dia GI \"C\"class Pipe from pump to NRV approximately 5m,suitable size electrical cable, starter, single phase preventer, overhead and reverse rotation protection device, oil seal failure, indication sensor, automatic control for on / off switch and outdoor type panel board for housing the starter etc., complete

Each 2 104049.60 Rupees One Lakh Four Thousand Forty Nine and Paise Sixty Only

208099.20

Make: Suguna, KSB, Kirloskar & Texno or equivalentCapacity:9.6 LpsHead:20mMaterial of construction: Pump casting: Cast ironImpeller: CF8m



BILL OF QUANTITIES





16 NSR Design, supply, installation, commissioning and testing of Horizontal centrifugal, submersible monoblock with volute type delivery casing, stainless steel shaft, mounted on a common base plate, directly coupled through the setup flexible coupling with suitable capacity induction motor for operation on 415volts and 50HZ,3phase AC power supply including suitable electrical panel board, cables single phase preventer, dry preventing preventer and provision for the maintenance of pumps chain block with pulley etc. complete. The supplier shall be give one year guarantee, supply minimum spares from one-year period etc.,

No 4 52024.80 Rupees Fifty Two Thousand Twenty Four and Paise Eighty Only

208099.20

HP : Suitable HP for considering the capacity & Head of pump sets(b) Head: 16m© Capacity 7.90 lps(d) Pressure gauge with brass cock - 1 no.(e) Standard foundation as per manufactures specifications(f) Material of constructionImpeller: bronzeDelivery casing: Cast ironMotor body: Cast ironShaft: Stainless steel

Total for Subhead No. XVI 3109097.40

Grand Total = 754543593.08


boq for building works - engineering...

Documents