boq - details of final quote for renovation of ground ... · boq - details of final quote for...
TRANSCRIPT
BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF GROUND FLOOR TOILET at NGC, NOIDA
Dated: Feb 12, 2018
S.No. ITEM / DESCRIPTION QTY UNITS RATE AMOUNT
1.00 DEMOLITION, DISMANTLING & CARTAGE
Thick polythene sheet/Tarpaulin covering ‐ Proper covering of entrance to toilet
with thick polythene sheet / Tarpaulin to keep out dust from renovation area. The
1.01 sheet will be permanent during the course of the project and will be changed in
case of damage. Proper signage will also be maintain stating nature of renovation
work under progress. 1.00 job
1.02
Demolition & removal of counter stone in all designated areas as per dwg; and
removal of debris from site. 2.08 sqm
1.03 Demolition & removal of all ceramic tiles in all floor and wall areas; and removal of 102.93 sqm debris from site.
1.04
Demolition & dismantling of brick walls, RCC counter and granite stone; and
removal of debris from site. 8.70 cum
1.05 Removal of existing sanitary and CP fitting and packing in bubble wrap. 1.00 job
1.06 Removal of doors, electrical fittings and other remaining items. 1.00 job
Sub‐Total (A)
2.00 CIVIL WORK
2.01 Brickwork in 230 mm thick wall extension as/design in cement mortar 1:4 (1 6.58 cum cement and 4 stone dust).
2.02 Brickwork in 115 mm thick wall extension as/design in cement mortar 1:4 (1 24.00 sqm cement and 4 stone dust).
Cement Plaster ‐ P/L internal 10 mm - 25 mm thick cement plaster on walls
2.03 including repairs on existing walls in 1:6 (1 cement and 6 stone dust) on scraped wall surface, ceiling, cill, lintel, cloumn etc. making smooth edge and corners
complete. 132.30 sqm
RCC Slab for counters - 100 mm RCC slab for counters including centering,
2.04 shuttering, finishing and nominal reinforcement. Concrete in M20 or in ration 1:1.5:3 (1 cement: 1.5 stone dust : 3 stone aggregate 15-20 mm nominal grade)
2.08 sqm
Waterproofing - Providing and laying water proofing treatment to vertical and
2.05 horizontal surfaces of depressed portions of W.C., toilets and the like consisting of
P/L water proofing treatment in sunken portion of WCs, bathroom etc., by applying
cement slurry mixed with water proofing cement compound consisting of applying
: a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4
hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure
for 4 hours followed with water curing for 48 hours. The rate includes preparation
of surface, treatment and sealing of all joints, corners, junctions of pipes and
masonry with polymer mixed slurry.
58.84 sqm
Sub‐Total (G)
3.00 FLOORING / STONE WORK
Vitrified Tile Flooring - P/L of 60 cm x 60 cm high quality digital vitrified tile
(thickness as per tile manufacturer) edge to edge in floor areas in pattern as per
3.01 drawings and details on 20 mm thick cement mortar 1:4 (1 cement and 4 stone
dust) including grouting the joints with white cement and matching pigment etc.
(base rate of tile - INR 55/sqft)
Cost includes cartage to site, proper storage, cutting, sizing and fixing. 26.65 sqm.
Granite stone counters - P/L 18-20 mm thick granite stone on RCC counter slab
in pattern as per drawings and details on 20 mm thick cement mortar 1:4 (1
3.02 cement and 4 stone dust) in cluding grouting the joints with white cement and
matching pigment etc. Stone sample to be approved by the architects or engineer
in charge.
Cost includes cartage to site, proper storage, cutting, sizing and fixing.
Base cost of stone landed at site including taxes: INR 265/ per sqft. 2.50 sqm.
Sub‐Total (B)
4.00 WALL FINISHING
Ceramic Wall tile - P/L of 30 cm x 60 cm ceramic wall tiles (thickness as per tile
manufacturer) edge to edge on wall surface in pattern as per drawings and details
4.01 on 20 mm thick cement mortar 1:4 (1 cement and 4 stone dust) including grouting
the joints with white cement and matching pigment etc.
Cost includes cartage to site, proper storage, cutting, sizing and fixing.
Base cost of tile landed at site including taxes: INR 45/- per sqft. 94.50 sqm
Wall Putty - P/applying white cement based putty of average thickness 1 mm on
4.02 non tiled area, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37.80 sqm
Sub‐Total (C)
5.00 ELECTRICAL/LIGHTING/VENTILATION
Internal point wiring for light point/ fan point/ exhaust fan point/ call bell point etc.
with 1.5 Sq. mm LSFR PVC insulated copper conductor single core cable in
5.01 surface/ recessed steel or PVC conduit, with modular switch, modular plate,
suitable size GI box and earthing the point with 1.5 sq.mm LSFR PVC insulated
copper conductor single core cable etc as required. 28.00 points
Wiring for light/ power plug with 2x4 sq.mm LSFR PVC insulated copper
5.02 conductor single core cable in surface/ recessed steel conduit alongwith 1 no. 4 sq.mm LSFR PVC insulated copper conductor single core cable for loop earthing
as required.
a 6/16A switch socket 6.00 points
Supplying and fixing following rating, double pole, (single phase and neutral), 240
5.03 volts, RCCB complete with connections, testing and commissioning etc, as
required. 1.00 job
5.04 Installing, testing and commissioning of electrical fixtures and fittings
a P/F of 18 W recessed/concelaed ceiling LED lights 19.00 nos
b P/F of 18 W mirros light fixtures 4.00 nos
c P/F of 300mm self closing louvred exhaust fans for toilet exhaust, to be fixed in
aluminium window/door frame. 5.00 nos
d P/F of 12 W wall focusing spot light 3.00 nos
Sub‐Total (D)
6.00 PARTITION/ WALLS/DOORS/GLASS/PANELLING/WINDOWS
WC Doors - P&F of pre- laminated flush doors of 20 mm thickness in opening
6.01 size of 750 mm x 2100 mm; hardwood frame of cross section 100 mm x 50 mm; 150 mm gap at bottom. The cost to include providing and fixing of all necessary
hardwares and fittings with lock from inside. 4.00 nos
Main Entrance Door - P&F of pre- laminated flush doors of 40 mm thickness in
opening size of 900 mm x 2100 mm; hardwood frame of cross section 100 mm x
6.02 50 mm; 10 mm gap at bottom. The cost to include providing and fixing of all
necessary hardwares and fittings with lock from outside.
2.00 nos
6.03 Looking Glass (Mirror) - P&F mirror of size 1800 mm x 1200 mm x 6 mm thk., to 2.00 no. be pasted on 6 mm thk ply as base, to be fixed with SS studs.
Toilet Urinal Glass Partitions - P&F frosted toughened glass partitions size 400
6.04 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware. The edge of glass to be 4 mm chamfered both sides. 3.00 nos
Wallpaper Graphic - P/F and pasting fabric finish wall paper (0.4mm to 0.5 mm
6.05 thick) as per design & Details. The item includes making POP base to get a uniform smooth surface. Complete to the satisfaction of the Architect/Engineer in
charge.
6.06 Base cost of wallpaper: INR 55/- per sqft. 7.20 sqm
Sub‐Total (E)
7.00 PAINT WORK
7.01 Wall and ceiling Painting in Toilet - Acrylic emulsion paint, 3 or more coats on 55.50 sqm walls and ceiling after necessary preparation of base surfaces.
7.02 Enamel Paint - Enamel painting of the window frame with necessary preperation 1.00 job of MS frame surface and primer.
Sub‐Total (F)
8.00 FALSE CEILING
8.01 Gypboard grid Ceiling - P/F 12 mm thick Gypboard grid false ceiling consisting
of GI frame work made of 20 mm x 50 mm x 16 gauge as main runners @ 4’ c/c
on both ways and 15 mm x 20 mm x 18 gauge secondary runners @ 2’ c/c, main
runners suspended from true ceiling. 26.60 sqm
Sub‐Total (H)
9.00 PLUMBING / DRAINAGE / FITTING CHARGES (currently selected from Hindware /Jaquar / Camry)
9.01 P/F of plumbing and drainage pipes in CPVC pipe and fittings for - including bend, traps and all required internal fitting
a Urinals 4.00 nos
b Wall hung WC, flush, healthfaucet and angle valve 4.00 nos
c Wash basin 4.00 nos
d Floor drains 8.00 nos
9.02 Fixing of under counter wash basin 4.00 nos
9.03 Fixing of wash basin faucet 4.00 nos
9.04 Fixing of hand dryer 2.00 nos
9.05 Fixing of bottle trap 4.00 nos
9.06 Fixing of angle valves 20.00 nos
10.00 CHINAWARE AND CP FITTINGS (currently selected from Hindware / Jaquar)
10.01 Supply of under counter wash basin 4.00 nos
10.02 Supply of wash basin faucet (make hindware - F320011) 4.00 nos
10.03 Supply of hand dryer (Make camry) 2.00 nos
10.04 Supply of bottle trap 4.00 nos
10.05 Supply of angle valves 20.00 nos
10.06 Supply of paper roll holder 4.00 nos
10.07 Supply of urinal (make hindware - 60011) 4.00 nos
10.08 Supply of health Faucet (make hindware) 4.00 nos
10.08 Supply of wall hung WC with cistern (make hindware - 92535) 4.00 nos
10.09 Supply and fixing of liquid soap dispenser 2.00 nos
10.10 Supply of floor drain 8.00 nos
TOTAL
GST @ 18%
GRAND TOTAL (inclusive of applicable taxes)
BOQ - DETAILS OF FINAL QUOTE FOR RENOVATION OF FIRST FLOOR TOILET at NGC, NOIDA
Dated: Feb 12, 2018
S.No. ITEM / DESCRIPTION QTY UNITS RATE AMOUNT
1.00 DEMOLITION, DISMANTLING & CARTAGE
Thick polythene sheet/Tarpaulin covering ‐ Proper covering of entrance to toilet
with thick polythene sheet / Tarpaulin to keep out dust from renovation area. The
1.01 sheet will be permanent during the course of the project and will be changed in
case of damage. Proper signage will also be maintain stating nature of renovation
work under progress. 1.00 job
1.02
Demolition & removal of counter stone in all designated areas as per dwg; and
removal of debris from site. 2.08 sqm
1.03 Demolition & removal of all ceramic tiles in all floor and wall areas; and removal of 102.93 sqm debris from site.
1.04
Demolition & dismantling of brick walls, RCC counter and granite stone; and
removal of debris from site. 8.70 cum
1.05 Removal of existing sanitary and CP fitting and packing in bubble wrap. 1.00 job
1.06 Removal of doors, electrical fittings and other remaining items. 1.00 job
Sub‐Total (A)
2.00 CIVIL WORK
2.01 Brickwork in 230 mm thick wall extension as/design in cement mortar 1:4 (1 6.58 cum cement and 4 stone dust).
2.02 Brickwork in 115 mm thick wall extension as/design in cement mortar 1:4 (1 24.00 sqm cement and 4 stone dust).
Cement Plaster ‐ P/L internal 10 mm - 25 mm thick cement plaster on walls
2.03 including repairs on existing walls in 1:6 (1 cement and 6 stone dust) on scraped wall surface, ceiling, cill, lintel, cloumn etc. making smooth edge and corners
complete. 132.30 sqm
RCC Slab for counters - 100 mm RCC slab for counters including centering,
2.04 shuttering, finishing and nominal reinforcement. Concrete in M20 or in ration 1:1.5:3 (1 cement: 1.5 stone dust : 3 stone aggregate 15-20 mm nominal grade)
2.08 sqm
Waterproofing - Providing and laying water proofing treatment to vertical and
2.05 horizontal surfaces of depressed portions of W.C., toilets and the like consisting of
P/L water proofing treatment in sunken portion of WCs, bathroom etc., by applying
cement slurry mixed with water proofing cement compound consisting of applying
: a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing
cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4
hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water
proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure
for 4 hours followed with water curing for 48 hours. The rate includes preparation
of surface, treatment and sealing of all joints, corners, junctions of pipes and
masonry with polymer mixed slurry.
58.84 sqm
Sub‐Total (G)
3.00 FLOORING / STONE WORK
Vitrified Tile Flooring - P/L of 60 cm x 60 cm high quality digital vitrified tile
(thickness as per tile manufacturer) edge to edge in floor areas in pattern as per
3.01 drawings and details on 20 mm thick cement mortar 1:4 (1 cement and 4 stone
dust) including grouting the joints with white cement and matching pigment etc.
(base rate of tile - INR 55/sqft)
Cost includes cartage to site, proper storage, cutting, sizing and fixing. 26.65 sqm.
Granite stone counters - P/L 18-20 mm thick granite stone on RCC counter slab
in pattern as per drawings and details on 20 mm thick cement mortar 1:4 (1
3.02 cement and 4 stone dust) in cluding grouting the joints with white cement and
matching pigment etc. Stone sample to be approved by the architects or engineer
in charge.
Cost includes cartage to site, proper storage, cutting, sizing and fixing.
Base cost of stone landed at site including taxes: INR 265/ per sqft. 2.50 sqm.
Sub‐Total (B)
4.00 WALL FINISHING
Ceramic Wall tile - P/L of 30 cm x 60 cm ceramic wall tiles (thickness as per tile
manufacturer) edge to edge on wall surface in pattern as per drawings and details
4.01 on 20 mm thick cement mortar 1:4 (1 cement and 4 stone dust) including grouting
the joints with white cement and matching pigment etc.
Cost includes cartage to site, proper storage, cutting, sizing and fixing.
Base cost of tile landed at site including taxes: INR 45/- per sqft. 94.50 sqm
Wall Putty - P/applying white cement based putty of average thickness 1 mm on
4.02 non tiled area, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 37.80 sqm
Sub‐Total (C)
5.00 ELECTRICAL/LIGHTING/VENTILATION
Internal point wiring for light point/ fan point/ exhaust fan point/ call bell point etc.
with 1.5 Sq. mm LSFR PVC insulated copper conductor single core cable in
5.01 surface/ recessed steel or PVC conduit, with modular switch, modular plate,
suitable size GI box and earthing the point with 1.5 sq.mm LSFR PVC insulated
copper conductor single core cable etc as required. 28.00 points
Wiring for light/ power plug with 2x4 sq.mm LSFR PVC insulated copper
5.02 conductor single core cable in surface/ recessed steel conduit alongwith 1 no. 4 sq.mm LSFR PVC insulated copper conductor single core cable for loop earthing
as required.
a 6/16A switch socket 6.00 points
Supplying and fixing following rating, double pole, (single phase and neutral), 240
5.03 volts, RCCB complete with connections, testing and commissioning etc, as
required. 1.00 job
5.04 Installing, testing and commissioning of electrical fixtures and fittings
a P/F of 18 W recessed/concelaed ceiling LED lights 19.00 nos
b P/F of 18 W mirros light fixtures 4.00 nos
c P/F of 300mm self closing louvred exhaust fans for toilet exhaust, to be fixed in
aluminium window/door frame. 5.00 nos
d P/F of 12 W wall focusing spot light 3.00 nos
Sub‐Total (D)
6.00 PARTITION/ WALLS/DOORS/GLASS/PANELLING/WINDOWS
WC Doors - P&F of pre- laminated flush doors of 20 mm thickness in opening
6.01 size of 750 mm x 2100 mm; hardwood frame of cross section 100 mm x 50 mm; 150 mm gap at bottom. The cost to include providing and fixing of all necessary
hardwares and fittings with lock from inside. 4.00 nos
Main Entrance Door - P&F of pre- laminated flush doors of 40 mm thickness in
opening size of 900 mm x 2100 mm; hardwood frame of cross section 100 mm x
6.02 50 mm; 10 mm gap at bottom. The cost to include providing and fixing of all
necessary hardwares and fittings with lock from outside.
2.00 nos
6.03 Looking Glass (Mirror) - P&F mirror of size 1800 mm x 1200 mm x 6 mm thk., to 2.00 no. be pasted on 6 mm thk ply as base, to be fixed with SS studs.
Toilet Urinal Glass Partitions - P&F frosted toughened glass partitions size 400
6.04 mm x 1000 mm x 6 mm thk., to be fixed with SS hardware. The edge of glass to be 4 mm chamfered both sides. 3.00 nos
Wallpaper Graphic - P/F and pasting fabric finish wall paper (0.4mm to 0.5 mm
6.05 thick) as per design & Details. The item includes making POP base to get a uniform smooth surface. Complete to the satisfaction of the Architect/Engineer in
charge.
6.06 Base cost of wallpaper: INR 55/- per sqft. 7.20 sqm
Sub‐Total (E)
7.00 PAINT WORK
7.01 Wall and ceiling Painting in Toilet - Acrylic emulsion paint, 3 or more coats on 55.50 sqm walls and ceiling after necessary preparation of base surfaces.
7.02 Enamel Paint - Enamel painting of the window frame with necessary preperation 1.00 job of MS frame surface and primer.
Sub‐Total (F)
9.00 PLUMBING / DRAINAGE / FITTING CHARGES (currently selected from Hindware /Jaquar / Camry)
9.01 P/F of plumbing and drainage pipes in CPVC pipe and fittings for - including bend, traps and all required internal fitting
a Urinals 4.00 nos
b Wall hung WC, flush, healthfaucet and angle valve 4.00 nos
c Wash basin 4.00 nos
d Floor drains 8.00 nos
9.02 Fixing of under counter wash basin 4.00 nos
9.03 Fixing of wash basin faucet 4.00 nos
9.04 Fixing of hand dryer 2.00 nos
9.05 Fixing of bottle trap 4.00 nos
9.06 Fixing of angle valves 20.00 nos
10.00 CHINAWARE AND CP FITTINGS (currently selected from Hindware / Jaquar)
10.01 Supply of under counter wash basin 4.00 nos
10.02 Supply of wash basin faucet (make hindware - F320011) 4.00 nos
10.03 Supply of hand dryer (Make camry) 2.00 nos
10.04 Supply of bottle trap 4.00 nos
10.05 Supply of angle valves 20.00 nos
10.06 Supply of paper roll holder 4.00 nos
10.07 Supply of urinal (make hindware - 60011) 4.00 nos
10.08 Supply of health Faucet (make hindware) 4.00 nos
10.08 Supply of wall hung WC with cistern (make hindware - 92535) 4.00 nos
10.09 Supply and fixing of liquid soap dispenser 2.00 nos
10.10 Supply of floor drain 8.00 nos
TOTAL
GST @ 18%
GRAND TOTAL (inclusive of applicable taxes)
MALE TOILET
4760X2700
FEMALE
TOILET
4760X2100
EXISTING
MALE TOILET
4760 X 3900
FEMALE TOILET
4760 X 2100
PROPOSED
1. ALL DIMENSIONS ARE IN MM.
Client Detail Noida Golf Course Job Title Proposed and Existing Layout Golf Course, Noida, U.P