bona urethane finish - gratoparquet.com file3 maintenance guide spills when a spill occurs, soak up...

4
Maintenance guide Technical especification 2018 MAINTENANCE GUIDE BONA URETHANE FINISH 2018

Upload: truongliem

Post on 11-Feb-2019

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: BONA urethane finish - gratoparquet.com file3 MAINTENANCE GUIDE Spills When a spill occurs, soak up the liquid right away. Mist the area with diluted Bona Cleaner and wipe off with

Maintenance guideTechnical especification2018

MAINTENANCE GUIDE BONA URETHANE FINISH

2018

Page 2: BONA urethane finish - gratoparquet.com file3 MAINTENANCE GUIDE Spills When a spill occurs, soak up the liquid right away. Mist the area with diluted Bona Cleaner and wipe off with

2

MAINTENANCE GUIDE

Maintenance guide Urethane finish

Page 3: BONA urethane finish - gratoparquet.com file3 MAINTENANCE GUIDE Spills When a spill occurs, soak up the liquid right away. Mist the area with diluted Bona Cleaner and wipe off with

3

MAINTENANCE GUIDE

SpillsWhen a spill occurs, soak up the liquid right away. Mist the area with diluted Bona Cleaner and wipe off with your Bona Mop. The Bona Spray Mop is also practical for these situations.

Extended MaintenanceBona offers three extended maintenance offers divided into Gold, Silver & Bronze treatment. Deeply scratched and stained floor.

– Gold treatment: Full sanding & new finish. Light scratched and soiled floor.

– Silver Treatment: Superficial sanding & overcoating with finish. Dry and soiled floor.

– Bronze Treatment: Deep cleaning & polish application.

These services are provided by your local flooring contractor.

Visit www.bona.com/Consumer/find-bona for assistance.

For more information visit bona.com

Maintenance guide Bona Urethane finish

Preventive MeassuresPlace matsPlace mats at exterior doors to trap moisture, sand and grit. Use rugs in high traffic pathways, at the endof stairs and near doorways. Avoid rubber backings or non-ventilated rugs.

Use protective pads Use protective pads on furniture.

Minimize use of water Always clean using as dry method as possible.

MaintenaceIf the floor seal is starting to show signs of wear (i.e. a dulling of surface) a protective maintenance coating such as bona Polish or Bona Freshen Up should be applied. For application use Bona´s special applicator pad and apply ideally to the whole floor surface. Clean the floor thoroughly prior to application to ensure that dirt is not trapped in the coating.

Daily ClearingVaccumVaccum or sweep floor on a daily basis. Don´t let sand, dirt or grit build up. They act like sandpaper, abrading and dulling the surface finish.

WipeWipe floor clean using a well wrung-out microfiber mop with Bona Cleaner added to the cleaning water (1:100 for regular cleaning, 1:50 for heavily soiled floors). Replace the cleaning water frequently and the mop as well if needed. Bona Cleaner is also suitable for use in scrubber driers which are effective for cleaning larger floors but should be handled with care on wooden floors. Only use white and red pads/brushes on scrubber driers so as to prevent scratching the surface. Always use as little water as possible to clean the floor and take care not to leave puddles.

Page 4: BONA urethane finish - gratoparquet.com file3 MAINTENANCE GUIDE Spills When a spill occurs, soak up the liquid right away. Mist the area with diluted Bona Cleaner and wipe off with

WOOD MANNERS S.L

C/ RUFINO PEÓN Nº 1739300 CAMPUZANO, CANTABRIA

(SPAIN)

www.gratoparquet.com