bona system - home | us.bona.com · bona d705 bona d705 is a dispersion and solvent- (approx. 4...
TRANSCRIPT
Bona System
Product Catalogue 2014/2015
Deep Clean System FlexiSand Pro System
Oil SystemFinishes
Sportive System Adhesives
FinishesFinishes
Sportive System
Finishes
Sportive System
Introducing The World of Bona
1
ContentsCoatings
Primers 33
Finishes 35
Naturale 38
Sportive System 39
Oils – Wear treatment 42
Oils – Effect treatment 43
Oils – Care treatment 44
Finishes - Effect treatment 44
Oils – Outdoor 46
Fillers & Repairs 46
Floor Care
Deep Clean System 50
Finishes – Maintenance 51
Oils – Maintenance 54
Tools & Accessories
Accessories 56
Application advice
Prime Deep System 60
Finish System 61
Naturale System 62
Sportive System 63
Create System 64
Create System with Naturale 65
Oil System 66
Hardwax Oil System 67
Adhesive Guidelines 68
Index of Bona adhesives 69
Introduction
Our promise 3
Fastening
Moisture Barrier 5
Levelling compounds 6
Underlayments 6
Water-based adhesives 6
PU adhesives – reactive 9
Silane adhesives 10
Application tools 11
Sanding – Machines
Belt sanders 13
Edge sanders 14
Bona FlexiSand Pro 17
Semi - Professional 20
Dust-free Sanding 21
Vacuum cleaners 21
Sanding – Accessories
Accessories for machines 22
Abrasives Ceramic 23
Abrasives Zircon 24
Abrasives Aluminium Oxide 25
Abrasives for Bona Scorpion 26
Abrasives Silicon Carbide 27
Pads 28
Abrasives Diamond 30
Purchase orders are executed according to our terms and conditions.
3
Our promiseDuring 2013, we took another important step in Bona’s
great journey of constant improvements when it comes
to product offer and sustainability. We’ve introduced the
extensive Bona Oil System, which now makes Bona a truly
complete surface treatment supplier for all types of wooden
floors. As a professional contractor, you can rely on Bona’s
effective solutions and skilled services, all delivered with
your personal health and working environment in mind.
The Bona System – solutions that make a differenceWhether it’s installation, renovation or maintenance, Bona has got everything it takes to
help you bring out the best in wooden floors. Our entire system of compatible products
offers the craftsman and floor owner only the best solutions with no compromise on
environment and health.
Lifetime Support – service all the wayNo matter if it’s a pre-finished floor treated with Bona’s UV coating or a renovated
conference floor protected with Traffic HD, Bona will support you all the way. Lifetime
Support means exactly this: extensive technical trainings, and experienced worldwide
staff and technicians available for your benefit whenever needed. This is stretching the
concept of support a little further, just because our craftsman is our partner!
Sustainability – with you and the environment in mindSustainability is a lot more than just a word for Bona. It is our very foundation, from
which we build all our activities. For that reason, we care about you as our partner in
every aspect of your craftsmanship. Product performance must go hand in hand with
your working environment – and we make that happen!
4
FasteningSuccess begins with a good foundation. And good fastening, with the right combination
of strength and elasticity, is the first step to achieving a beautiful and lasting wooden
floor. At Bona, our continuous R&D and dialogues with craftsmen have equipped
us with what it takes to offer perfection in our craft. In this section, you will find all the
products and accessories you need to lay the best foundation, regardless of subfloor
type, dampness and evenness.
1. Moisture Barrier
2. Levelling Compounds
3. Underlayments
4. Water based adhesives
5. PU adhesives – reactive
6. Silane adhesives – reactive
7. Application tools
5
Fastening
Bona R410 Bona R410 is a solvent and water-free, 2-component epoxy resin, suitable for damp proofing concrete or cement subfloors up to 5.0 cm/%, for use as a primer prior to the application of a suitable adhesive or levelling compound, as well as a light reinforcement of slightly weak subfloors.
Key Benefits: Technical Data:
• Up to 5.0 cm/%• Excellent adhesion to many substrates• Reinforcement abilities
Base: Epoxy resin, 2K Density: 1.1 g/m² Consumption: Approx. 150–250 g/m² as a primer, 500 g/m² as a moisture barrier Pot life: Approx. 20 min Application tools: Brush, roller, mohair roller
BR41002000GBBO 5 kg 1 60
Bona R540 Bona R540 is a multipurpose reactive PUR primer, used on absorbent and non-absorbent subfloors before using a reactive Bona adhesive. The product can also be used for damp-proofing concrete floors and substrates up to 4 cm/%.
Key Benefits: Technical Data:
• Good penetration abilities • DPM up to 4.0 cm/% • Suitable for all Bona silane-based and PUR adhesives
Base: 1K polyisocyanate prepolymer Drying time: 1–24 h depending on the adhesive type Density: 1.14 kg/m³ Application tools: Stainless steel trowel, mohair roller, brush
BR54002200M1BO 6 kg 3 132
Bona R580 1K Bona R580 is a unique, single coat, fast-setting, silane-based moisture barrier system. it is designed to treat damp subfloors (up to 90% rH or 5.0 cm/%) prior to the installation of wood flooring using Bona silane-based adhesives. After the broadcasting of quartz sand the application of a Bona levelling compound is also possible.
Key Benefits: Technical Data:
• Water- and solvent-free • Single coat application • Up to 90% rH or 5.0 cm/% • Comparable with all Bona silane-based adhesives
Base: Silane-based Drying time: 4–8 h Density: 1.25 kg/m³ Application tools: Bona 500F notched trowel Consumption: 500 g/m²
BR58005000GBBO 7 kg 1 60
For adhesive guidelines see pages 87 and 88
Moisture Barriers Type Article number Packaging Pcs/transport package
Package/pallet
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
6
Fastening
Levelling Compounds Type Article number Packaging Pcs/transport package
Package/pallet
Bona H600 Bona H600 is a cementitious, self-smoothing, rapid hardening levelling compound especially for the application under mosaic parquet, lamparquet, multi-layer parquet and solid parquet. Bona H600 is also suitable to be used prior to the installation of LVTs.
Key Benefits: Technical Data:
• Self levelling and self smoothing• Applicable in a thickness from 1.5 to 10 mm, for more thickness the material can be spun out • Certified as “very low emission” EC 1 R • CE certified
Base: Cement, synthetic resin Consumption: 1.5 kg/m²/mm Pot life: Approx. 30 min Walkable: After approx. 3 h Mixing ratio: 25 kg powder : 5.75 L water (regular application) Application tools: Bona squeegee R1 or R2, flat edge hand trowel Drying time: 24 h up to 10 mm
BH600031DE 25 kg 1 40
Underlayments Type Article number Packaging Pcs/transport package
Package/pallet
Bona U300 Bona U300 is an underlayment made of recylced fine PUR foam granules and cork, bound with PUR elastomers. Bona U300 can be used under parquet, laminate floors and other floor coverings. It will reduce the transmission of sound from footfall. It is also suitable for a light stress decoupling.
Key Benefits: Technical Data:
• DIBt approval • Easy to install • Suitable for use with various Bona adhesives
Base: Fine recycled PUR granules and cork Colour: Brown, black, grey, beige, brown Available thickness: 2.3 and 5 mm Fire protection class: Efl (EN 13501) Impact sound reduction: Up to 19 dB
2 mm AX36225002 30 m² 1 11
3 mm AX36225003 20 m² 1 11
5 mm AX36225005 16 m² 1 11
Water-based adhesives Type Article number Packaging Pcs/transport package
Package/pallet
Bona D705 Bona D705 is a dispersion and solvent- (approx. 4 weight-%, ethyl acetate, ethanol) based parquet adhesive with low water content. Bona D705 is characterised by its high adhesion behaviour.
Key Benefits: Technical Data:
• DIBt approval • High adhesion power • Universal suitability • Rapid setting • Firm texture – retains trowel pattern
Base: PVAC dispersion with 4 weight-% ethyl acetate, ethanol Density: 1.4 g/cm³ Open time: Approx. 20 min Consumption: 850–1250 g/m²
BD70504700GBBO 22 kg 1 24
For adhesive guidelines see pages 87 and 88
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
7
Fastening
For adhesive guidelines see pages 87 and 88
Water-based adhesives Type Article number Packaging Pcs/transport package
Package/pallet
Bona GluClic Bona GluClic is a solvent-free white glue that meets the requirements of class D3. It is suitable for glueing various timber materials, i.e. wooden joint click systems, prefinished parquet, laminate floor coverings and chipboards. Different to other D3 glues, Bona GluClic residues or spilt material can, up to 2 days after application, easily be removed from prefinished parquet and laminated floors.
Key Benefits: Technical Data:
• Good resistance to water after drying• Rapid setting• Removable from prefinished parquet and laminated surfaces
Base: PVAC dispersion Density: 1.09 g/cm³ Consumption: Approx. 1 kg / 30 m²
BD700G1100GBBO 0.75 kg 12 480
Bona D740 Bona D740 is a dispersion-based contact adhesive for glueing down solid cork tiles up to 6 mm thick, without a coated backing.
Key Benefits: Technical Data:
• High initial strength • Immediately suitable for walking • Suitable for chair casters
Raw material base: Latex/acrylate dispersion Density: 1.1 g/cm³ Colour: White, beige Application: Notched trowel (200 g) and paint roller (no foam material) Curing time: Approx. 40 min Setting time: Approx. 210 min Consumption: Approx. 200–210 g/m²
Cork Contact Adhesive BD74005000GBBO 7 kg 1 60
Bona D750 Bona D750 is a solvent-free, 1-component fiber-reinforced dispersion-based wet-bed adhesive for installing PVC design floorings on absorbent subfloors. Its short open time results in low emissions, and its excellent suction makes it ideal for use with PVC design floors in tiles and planks. Due to its high shear resistance, D750 is very suitable for minimising joints e.g. for PVC design planks.
Key Benefits: Technical Data:
• High shear strength• Excellent suction• Prevents wide joints e.g. with PVC design planks• Short venting time and long open time
Raw material base: Dispersion based on ethylene-vinyl acetate-acrylate, fiber-reinforced Density: 1.1 g/cm³ Colour: Beige Application: Notched trowel Venting time: Approx. 5 min* Open time: Approx. 30 min* Consumption: Approx. 200–300 g/m² *at 20°C and 50 %rH
BD75002700DEBO 14 kg 1 32
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
8
Oil SystemFinishes
FlexiSand 1.5
FinishesFinishesD750
Power DriveTraffic HD
Solution highlights 2014Bona System – Fully compatible solutions for wooden floors
Traffic HD Low-VOC waterborne finish for ultimate wear resistance and protection.
Power Drive The world’s first direction-free bare wood sanding.
D750 Solvent-free adhesive with high shear resistance ideal for installing PVC design floorings.
Oil System Complete oil system for wooden floors that delivers unique 2-dimensional effects.
Deep Clean System Remove the toughest dirt, grime and scuff marks and revitalise your floor.
DCS Dust-free sanding system to keep indoor air quality at an optimum.
FlexiSand 1.5 Versatile system for all sanding challenges.
DCS
Deep Clean System
9
Fastening
Bona R200 Hollow Spot Repair Single component polyurethane-based repair liquid for filling hollow spots and reattaching loose parquet elements or boards.
Key Benefits: Technical Data:
• Free of solvents and water• Excellent adhesion on most subfloors• Light foaming
Base: 1K PUR Drying time: 4 h Density: 1.17 g/cm³
BR20005900GBBO 530 g 6
Bona R778 Bona R778 is a 2-component polyurethane parquet adhesive compliant to EN 14293 (hard). It does not contain water or organic solvents. The adhesive hardens by a chemical reaction without shrinking. R778 is especially suitable for timbers extremely sensitive to swelling (moisture) and for low-/non-absorbent substrates.
Key Benefits: Technical Data:
• Very long open time • Excellent adhesion to almost all substrates and timber materials• Improved rib stability
Base: Mixture of poluols and pMDIDensity: 1.7 g/cm³Colour: Component A: beige Component B: brownApplication: Notched trowel Pot life: Approx. 40 minOpen time: Approx. 110 min Consumption: 850–1250 g/m²
BR77802400M1BO 10 kg 1 60
For adhesive guidelines see pages 87 and 88
PU adhesives – reactive Type Article number Packaging Pcs/transport package
Package/pallet
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
10
Fastening
Bona R848 Bona R848 is an elastic; compliant to EN 14293 (soft); 1-component silane-based adhesive for dimensional stable multilayered, engineered parquet. Tensions to the subfloor are reduced. The use of a primer is in general not necessary. The adhesive hardens by a chemical reaction with moisture. Bona R848 can also be used, under suitable conditions, for the installation of solid timber products as mosaic and block parquet.
Key Benefits: Technical Data:
• Elastic but stable • Water- and solvent-free nearly no swelling of the wood • Rapid initial bonding strength • Can be used for dimensional stable solid parquet
Base: Silane modified prepolymer (STP)Density: 1.6 g/cm³Colour: BeigeApplication: Notched trowel Open time: Approx. 30 min Consumption: 850–1250 g/m²
BR84802800M1BO 15 kg 1 44
BR84805400M1BO 24 kg 1 32
BR84805600M1BO 600 ml 20 36
BR84805700M1BO 1800 ml 6 30
BR84805800M1BO 2810 ml 4 21
BR84806800M1BO 5400 ml 2 35
Bona R850 Bona R850 is an elastic; compliant to EN 14293 (soft); 1-component silane-based adhesive for parquet floors. The hardened adhesive is similar to conventional adhesives – able to withhold thrust during expansion, while the resistance against shrinkage is very low. Tensions to the subfloor are therefore reduced. The use of a primer is, in general, not necessary. The adhesive hardens by a chemical reaction with moisture.
Key Benefits: Technical Data:
• Water- and solvent-free, no swelling of the wood• Suitable for solid boards • High shear strength to withold thrust during expansion • Appropriate elasticity
Base: Silane modified prepolymer (SPUR)Density: 1.5 g/cm³Colour: BeigeApplication: Notched trowel Open time: Approx. 40 min Consumption: 850–1500 g/m²
BR85005000M1BO 7 kg 1 60
BR85002800M1BO 15 kg 1 44
For adhesive guidelines see pages 87 and 88
Silane adhesives – reactive Type Article number Packaging Pcs/transport package
Package/pallet
040-001-1898
040-001-1105
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
11
Fastening
Bona Notched Trowel for Bona R580
Notched trowels for adhesive application.
500F (A3) AT31400280 180 x 150 mm 10
500F (A3) AT31400380 250 x 150 mm 10
Bona Notched Trowel Notched trowels for adhesive application.
850F (B3) AT31401180 180 x 150 mm 10
850G (B6) AT31402180 180 x 150 mm 10
1000F (B8) AT31403180 180 x 150 mm 10
1000G (B10) AT31404180 180 x 150 mm 10
1250F (B12) AT31405180 180 x 150 mm 10
1250G (B13) AT31406180 180 x 150 mm 10
1500F (B14) AT31409180 180 x 150 mm 10
1500G (B16) AT31410180 180 x 150 mm 10
200F (A2) AT31413180 180 x 150 mm 10
200F (A2) AT31413250 250 x 150 mm 10
Bona adhesive cartridge applicator
Applicator 310 ml for application of Bona Gap Master and Bona R880.Applicator for 600 ml sausages.
200F (A2) AT32040000 310 ml 1
200F (A2) AT32042000 600 ml 1
Bona Tool Cleaner Cleaning tissues to remove silane-based adhesive residues and other difficult-to-remove materials.
AT322000 8
For adhesive guidelines see pages 87 and 88
Application tools Type Article number Packaging Pcs/transport package
Package/pallet
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
12
SandingThe key to great sanding results lies in the perfect combination of machines and
abrasives used. The Bona Elite Fleet is a comprehensive, fully compatible range that is
designed to perform in all professional and semi-professional sanding tasks.
Regardless of whether you are a full professional in need of the highest square-metre capacity,
a craftsman requiring a flexible solution, or a dedicated semi-pro looking for a safe, reliable
result, the Bona Elite Fleet has got an ideal solution within each product category.
1. Belt sanders
2. Edge sanders
3. FlexiSand Pro
4. Semi - Professionals
5. Dust-free sanding
6. Vacuum cleaners
7. Sanding Accessories
8. Abrasives
Domestic professional Semi-professionalDust-free sanding
Sanding under stairs
Narrow hallway sanding
Large public areas Sport halls
Edge sanding
13
Sanding - MachinesBelt sanders Type Article number Effect Volt / Hertz Package/
pallet
Bona Belt HD The Bona Belt HD sanding machine makes big jobs seem small. It is a true heavy-duty machine with tremendous power and effectiveness. The unique dual-speed pulley system and infinite drum pressure adjustment guarantee optimum sanding quality regardless of wood species. It can be easily disassembled into three parts, and quickly reassembled. Power, reliability and capability as an effective all-around belt sander.
Application: For sanding of all kinds of wooden and parquet floors, especially effective on big surfaces and heavy-duty applications
Key Benefits: Technical Data:
• Heavy weight for powerful sanding• Dual speed for optimum sanding result• Infinite pressure adjustment: up to 50% of its weight can be adjusted to the sanding drum • Easy fitting and changing of paper, no tools needed• Can fit distressing drums to texture wood floors on site
Weight: 38 kgDrum width: 200 mm Sanding belt size: 200 x 750 mmMotor power: 2.0 and 4.0 kW Total weight: 85 kg Drum revolutions: 1850 and 2050 rpm
200 mm AMK170000 4 kW 230 V / 50 Hz
200 mm AMK171000 2.99 kW 400 V / 50 Hz
200 mm AMK170001 4 kW 230 V / 50 Hz
200 mm AMK170002 2.99 kW 230 V / 60 Hz
200 mm AMK172000 2.99 kW 230 V / 50 Hz
200 mm AMK172001 2.99 kW 230 V / 50 Hz
200 mm AMK171010 4 kW 220 V / 60 Hz
Bona Belt The compact design makes the Bona Belt simple to manoeuvre and the specially designed transport cart makes the machine easy to transport in between jobs. Powerful and effective, with two optional drum widths, 200 and 250 mm, makes it a versatile belt machine for many purposes. The machine can be disassembled and reassembled quickly and easily. The Bona Belt has a very efficient vacuum that minimises dust. The easy-start function ensures reliable startup under all conditions.
Application: For sanding all kinds of wooden and parquet floors.
Key Benefits: Technical Data:
• Adaptive to many needs• Compact design makes the machine simple to manoeuvre and easy to transport• Unique construction with a simple change of drums with either a 200 mm or a 250 mm width • Ergonomically designed feather handle for raising and lowering of drum • Very efficient vacuuming • Adjustments can be made from top of machine• Large front and side covers make the drum and tension roller easy to reach• Transport cart for easy transportation between sites
Drum width: 200 mm alt. 250 mm Sanding belt size: 200 x 750 mm alt. 250 x 750 mm Easy start: Enables 1-push start on a 10 A fuseMotor power: 1-phase 2.2 KW Total weight: 74 kg Drum revolutions: 1750 rpm Dust discharge: < 2 mg / m³ air
250 mm AMO110000.3
200 mm AMO110001.3
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
14
SandingBelt sanders Type Article number Effect Volt / Hertz Package/
pallet
Bona Belt Lite The Bona Belt Lite sanding machine is a compact belt sander able to do great jobs. Designed to be the perfect combination of efficiency, power and agility. It can be easily disassembled into three parts, and quickly reassembled in a few simple steps.
Application: For sanding all kinds of wooden and parquet floors
Key Benefits: Technical Data:
• Optimal balance between weight and drum pressure • Superior manoeuvrability• Light weight of 60 kg • Infinite pressure adjustment: up to 50% of its weight can be adjusted to the sanding drum• Easy fitting and changing of paper, no tools needed• Can fit distressing drums to texture wood floors on site
Drum width: 200 mm Sanding belt size: 200 x 750 mm Motor power: 2.2 kW Total weight: 60 kg Drum revolutions: 2400 rpm
200 mm AMK175000 2.2 kW 230 V / 50 Hz
200 mm AMK175001 2.2 kW 230 V / 50 Hz
200 mm AMK175010 2.2 kW 220 V / 60 Hz
Edge Sanders Type Article number Effect Volt / Hertz Package/pallet
Bona DualEdge The Bona DualEdge is a steering sander that can be operated linearly as well as in circular motions. It is equipped with counter-rotating 100 mm dual-head discs, which give stability, high speed, and drive the dust towards the dust extractor. Bona DualEdge has a LED front light for better illumination. The revolutionary concept greatly increases working speed.
Application: For edge sanding of all kinds of wooden floors and parquet floors
Key Benefits: Technical Data:
• Counter-rotating dual head discs • Close to corners – less final sanding needed• Very manoeuvrable • High sanding and working speed• Lightweight • Efficient vacuuming• Safety operating switch button on the handle
Discs: 2, contra-rotatingDiscs diameter: 100 mm Motor power: 1.15 KW Total weight: 9 kg Length sanding arm: 155 mm Disc speed: 4500 rpm
150 mm AMK270000 1.15 kW 230 V / 50 Hz
150 mm AMK270001 1.15 kW 240 V / 50 Hz
150 mm AMK270010 1.15 kW 115 V / 60 Hz
- MachinesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
15
SandingEdge sanders Type Article number Effect Volt / Hertz Package/
pallet
Bona Edge The more compact Bona Edge is an extremely powerful lightweight edge sander. It can be fitted with ‘holed discs’ or Velcro-backed discs and picks up dust better than most edge sanders on the market. It is equipped with lamps for better visibility and its shorter sanding arm improves manoeuvrability, which makes the machine easier to control.
Application: For edge sanding of all kinds of wooden floors and parquet floors
Key Benefits: Technical Data:
• Effective dust pickup• High sanding ability• Very manoeuvrable• Powerful motor• Efficient vacuuming• Lightweight• For both discs with holes and velcro discs
Disc diameter: 178 mmMotor power: 1-phase 2.0 kWTotal weight: 14.5 kg alt. 15.5 kgLength sanding arm: 130 mmDisc speed: 3000 rpmDust discharge: < 1 mg / m³ air
220 mm AMO230009.3
330 mm AMO230010.3
Bona CombiEdge The Bona CombiEdge is a lightweight and flexible edge sander. Easily switch between a 120 mm short-arm edger or a 330 mm long-arm sander in just a few simple steps. The 330 mm arm provides excellent reach under deep toe kicks and radiators. The lightweight and highly efficient edge-sanding machine is also fitted with a frontal LED light for better visibility.
Application: For edge sanding of all kinds of wooden floors and parquet floors
Key Benefits: Technical Data:
• Easily switchable arm for sanding under stairs • Very manoeuvrable• Lightweight • Medium sanding ability • Efficient vacuuming• Safety operating switch button on the handle
Discs diameter: 150 mm Motor power: 1.15 KW Total weight: Short arm 7.5 kg; Long arm 8.3 kgLength sanding arm: 125 mm Disc speed: 3300 rpm
150 mm AMK282000 1.15 kW 230 V / 50 Hz
150 mm AMK282001 1.15 kW 240 V / 50 Hz
150 mm AMK282010 1.15 kW 115 V / 60 Hz
150 mm AMK280000 1.15 kW 230 V / 50 Hz
150 mm AMK280001 1.15 kW 240 V / 50 Hz
150 mm AMK280002 1.15 kW 230 V / 50 Hz
Bona CombiEdge Short 150 mm AMK280010 1.15 kW 115 V / 60 Hz
150 mm AMK281000 1.15 kW 230 V / 50 Hz
150 mm AMK281001 1.15 kW 240 V / 50 Hz
150 mm AMK281002 1.15 kW 230 V / 50 Hz
Bona CombiEdge Long 150 mm AMK281010 1.15 kW 115 V / 60 Hz
- Machines
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
16
Sanding down to bare wood
Intermediate wood sanding
Smoothing of concrete
Grinding of screeds
Residue removal
Compatible withBona F lex iSand Pro
Bona FlexiSand
P ro 1 .5
New
Fantastic
The Bona
Flex iSan d 1.5
New
The All-New
Bona F lex iSand
1.5
results even on old
hard lacquer layers
1.5
Bona FlexiSand
Compatib le
1.5
Compatible with Bona
FlexiSand Pro
1.5
The next generation in the Bona FlexiSand Pro System is here. The all-new Bona FlexiSand
1.5 is the first direction-free sanding machine that can sand down to bare wood.
Combined with the Bona Power Drive and Bona 8700 Abrasives, challenging sanding
tasks can now be accomplished with never-before ease and comfort. Specially made
for bare wood sanding, the versatile FlexiSand 1.5 also delivers uncompromising
performance for all flooring challenges.
One Versatile System for All Sanding ChallengesBona FlexiSand 1.5 – World’s first in direction-free bare wood sanding
17
Sanding
Compatible withBona F lex iSand Pro
Bona FlexiSand
P ro 1 .5
New
Fantastic
The Bona
Flex iSan d 1.5
New
The All-New
Bona F lex iSand
1.5
results even on old
hard lacquer layers
1.5
Bona FlexiSand
Compatib le
1.5
Compatible with Bona
FlexiSand Pro
1.5
FlexiSand Pro System Type Article number Packaging Pcs/transport package
Package/pallet
Bona FlexiSand 1.5 Bona FlexiSand 1.5 is a powerful and flexible machine that can be equipped with different drive plates for a wide variety of floor preparation jobs. With its powerful 1.5 kW motor and robust construction, it operates smoothly and easily even with heavy jobs. Bona FlexiSand 1.5 is compatible with the Bona Power Drive, a unique drive plate that allows powerful, direction-free sanding down to bare wood.
Application: For sanding all kinds of wooden and parquet floors
Key Benefits: Technical Data:
• Powerful, single-speed motor• Easy and ergonomic operation• Foldable handle reduces space required during transportation• Big wheels for easy transportation• Connects with the Bona DCS 70 for dust- free sanding• Compatible with the Bona Power Drive
Motor type: 1 phaseVoltage (+/- 5%): 230 V ~Frequency: 50 HzPower: 1.5 kWRated current: 8.5 ASafety devices10 A overload switch (manual reset), thermal protection in the motor (automatic reset)Recommended fuse: 10 AAbrasive disc speed: (unloaded) 147 rpmTotal weight: 45 kgDiameter of disc: 407 mm (16’’)Height / Width / Depth: 1170 mm / 490 mm / 640 mm
Ø 407 mm AMO310001
Bona Power Drive The innovative Bona Power Drive creates a new dimension for sanding down to bare wood. Using a direction-free sanding technique, the drive combines excellent performance with easy operation. Four rotating discs sand closely to the walls, which reduces the need for edge sanding. The geared plate as well as the revolving discs ensures increased power for excellent performance in bare wood sanding when used in combination with Bona 8700 Ceramic abrasive.
Application: For sanding all kinds of wooden and parquet floors down to bare wood
Ø 407 mm ASO312540 1
Bona Diamond Disc Bona Diamond Disc is delivered with diamond segments mounted on the plate. Diamond segments are suitable for most sanding purposes on concrete floors and will maintain the same sharpness during their entire lifetime. They are specially developed for removing the sinter layer from levelling compounds and/or screeds.
Ø 407 mm ASO312550 1
Bona PCD Disc Disc with PCD segments for more aggressive sanding and removal of adhesive residues, carpet foam and paint.
Ø 407 mm ASO312560 1
- Machines
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
18
Sanding
FlexiSand Pro System Type Article number Packaging Pcs/transport package
Package/pallet
Bona Multidisc Bona Multidisc, with six plates (125 mm), takes fine sanding performance to the next level. The fantastically smooth end-results make Bona Multidisc the perfect sanding tool, before staining wooden floors, oiling with pigmented oil or applying finishes.
Ø 407 mm ASO312520 1
Bona Pad Drive The Bona Pad Drive is delivered with Bona FlexiSand machines. Bona Pad Drive is a multi-purpose tool that can be used with a pad to oil or stain wooden floors. When a pad and screen are mounted on the Bona Pad Drive, intermediate sanding is easily performed. Oiled surfaces can be polished to increase the lustre of the floor.
Ø 407 mm ASO312501 1
- MachinesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
19
Introducing the latest innovation in Bona’s versatile FlexiSand Pro system, the
Bona Power Drive – the world’s first system that delivers direction-free sanding
down to bare wood.
Exclusively made for the FlexiSand 1.5 machine, its dynamic cog design channels
significantly more power versus conventional sanding discs. It sands close to walls,
minimising manual edge sanding. Effective and easy to operate, the Bona Power Drive
transforms bare wood sanding into a smooth, simple and manageable process.
Power Up for Bare Wood SandingBona Power Drive – A direction-free sanding breakthrough
B a re W o o d S a nding
ALLNEW
Bon
a Power Drive
20
Sanding
Semi-professional Type Article number Packaging Pcs/transport package
Package/pallet
Bona Scorpion DCS Delivering the same performance and ease of operation as the Bona Scorpion, the DCS version comes with the attached Dust Care System which operates on an independent switch, and it can also be connected to other machines.
The vacuum unit consists of a disposable paper bag and an additional HEPA filter. Bona Scorpion DCS is the perfect combination of functionality, reliability, safety, ease of use and dust-free sanding.
Application: For sanding of all kinds of wooden and parquet floors by users of all proficiency levels: professionals, semi-professionals or DIY users.
Key Benefits: Technical Data:
• DCS vacuum on board• Light weight of 43 kg• Operating button on handle• 3 levels of pressure adjustment• Easy fitting and changing of paper sleeve, no tools needed• Can fit distressing drums to texture wood floors on site
Drum width: 200 mm Sanding belt size: 200 x Ø 480 mm Motor power: 1.3 kW + 1.2 kW (vacuum unit) Total weight: 43 kg Drum revolutions: 3000 rpm
200 mm AMK185000 1.3 kW 230 V / 50 Hz
200 mm AMK185001 1.3 kW 230 V / 50 Hz
200 mm AMK185010 1.3 kW 115 V / 50 Hz
200 mm AMK185011 1.3 kW 115 V / 60 Hz
- MachinesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
21
Sanding
Dust-free Sanding Type Article number Packaging Pcs/transport package
Package/pallet
Vacuum Cleaner Type Article number Packaging Pcs/transport package
Package/pallet
Bona DCS 70 The Bona DCS 70 is a powerful tool for completely dust-free sanding. Its two-step cyclonic separation and unique filter design effectively contains dust within the machine. It is highly portable and can be easily connected to your sanding machine, helping you keep your working environment clean and reducing your working time.
Application: For dust-free sanding of all kinds of wooden and parquet floors
Key Benefits: Technical Data:
• 2-step cyclonic separation and unique filter• Healthier working conditions – in compliance with new regulations • Totally sealed system – unique seamless bag system, no dust can escape when changing dust bag • Greater customer satisfaction because of sanding without dust and reduced odour • Exclusive design from Bona – unique separation process • Ergonomic – designed for easy use and transport • Superb end-result after applying finish because no dust is left on the surface of the bare wood • Made for professional use – robust, high quality machine for flooring contractors
Weight: 43 kg Dimensions: 800 mm x 600 mm x 1200 mm Collection capacity: Approx. 70 litres Motor: 1400 W, 230 V, 5 A Air flow: 235 m3 / hour Coarse filter: Conical folded polyester filter, 1.0 m2
Fine filter: Class H 13 (99.996%, 0.3 μm), 1.0 m2
Hose aperture: Ø 35 mmLength of hose: 7.5 m including connection adapters for: Bona Belt, Bona FlexiDrum, Bona Edge and Bona Mini Edge and Bona Edge 130
AMO530005 1
Dust Bags LongoPac LongoPac for DCS 70 X 20 m
ASO539001 20m 1
Bona S20 vacuum cleaner A powerful, manoeuvrable and robust vacuum cleaner for cleaning hard floors, carpets, furniture etc. The unit can be connected to the Bona Buffer with a 4 m hose, allowing effective dust removal.
Application: For cleaning hard floors, carpets, furniture etc. or connection to Bona Buffer for dust removal
Technical Data:
Total power max: 230 V, 1100 WWater pillar: 1900 mmDust bag capacity: 10 LCable length: 10 mWeight: 10 kg
AMC020000 1
- Machines
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
22
Sanding
Accessories Type Article number Packaging Pcs/transport package
Package/pallet
Extra weight A 7 kg weight for increased sanding performance.
7 kg ASO991110 1
Transport cart Transport cart for easier transport of Bona Belt.
ASO995022 1
Bona CEE Adapter With this adapter you can use Bona Belt and DCS-cable as a common 230 V cable.
ASO903670 1
- Accessories
LED lamp Accesorry for Bona FlexiSand 1.5 including two LED lamps.
Key Benefits:
• Easy and ergonomic operation• Foldable handle to minimise space during transportation• Big wheels for easy transportation• Connects with the Bona DCS70 for dust-free sanding• Prepared for the Bona Power Drive
ASO319000 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
23
SandingAbrasives Ceramic Type Article number Packaging Pcs/transport
packagePackage/
pallet
Bona 8700 Ceramic Disc Discs for Bona MultiDisc. Bona 8700 Ceramic Abrasives are specially developed for coarse sanding of hard lacquers like urea formaldehyde. In combination with 8300 antistatic, it is a perfect system for achieving the best wooden floor surface. The extreme high performance is made possible by a grit type containing ceramic aluminium oxide, which results in an aggressiveness for optimal removal.
Key Benefits:
• Polyester cloth backing • Rough sanding on hard wood • For heavy-duty applications on belt sanders • Very good lifetime • Very high performance thanks to high stability
125 mm Grit 36 AAS471600365 25
125 mm Grit 50 AAS471600505 25
150 mm Grit 36 AAS471700365 25
150 mm Grit 50 AAS471700505 25
178 mm Grit 36 AAS471800365 25
178 mm Grit 50 AAS471800505 25
Bona 8700 Ceramic Belt Bona 8700 Ceramic Abrasives are specially developed for coarse sanding of hard lacquers like urea formaldehyde. In combination with 8300 antistatic, it is a perfect system for achieving the best wooden floor surface. The extreme high performance is made possible by a grit type containing ceramic aluminium oxide, which results in an aggressiveness for optimal removal.
Key Benefits:
• Polyester cloth backing • Rough sanding on hard wood • For heavy-duty applications on belt sanders • Very good lifetime • Very high performance thanks to high stability
200 x 750 mm Grit 36 AAS469500363 1
200 x 750 mm Grit 50 AAS469500503 1
250 x 750 mm Grit 36 AAS469600363 1
250 x 750 mm Grit 50 AAS469600503 1
- Abrasives
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
24
Sanding
Ø 150 mm Grit 24 AAS467500245 25
Ø 150 mm Grit 36 AAS467500365 25
Ø 150 mm Grit 40 AAS467500406 50
Ø 150 mm Grit 60 AAS467500606 50
Ø 150 mm Grit 80 AAS467500806 50
Ø 150 mm Grit 100 AAS467501006 50
Ø 150 mm Grit 120 AAS467501206 50
Ø 178 mm Grit 24 AAS467400245 25
Ø 178 mm Grit 36 AAS467400365 25
Ø 178 mm Grit 40 AAS467400406 50
Ø 178 mm Grit 60 AAS467400606 50
Ø 178 mm Grit 80 AAS467400806 50
Ø 178 mm Grit 100 AAS467401006 50
Ø 178 mm Grit 120 AAS467401206 50
Abrasives Zircon Dimension Grit Article number Packaging Pcs/transport package
Bona 8300 Antistatic Zircon Belt Optimal silicon carbide/zirconium mix on the abrasive surface ensures fast sanding results – taking you further. Improved antistatic and smooth performance reduces clogging to a minimum, adding square-metre results. Contains self-sharpening material for a longer lifetime.
Key Benefits:
• Cotton cloth backing • Electrostatic dust release • Efficient dust-extraction • Cleaner floor surfaces • Improvement of surface quality
200 mm x 750 mm Grit 24 AAS467700243 10
200 mm x 750 mm Grit 36 AAS467700363 10
200 mm x 750 mm Grit 40 AAS467700403 10
200 mm x 750 mm Grit 60 AAS467700603 10
200 mm x 750 mm Grit 80 AAS467700803 10
200 mm x 750 mm Grit 100 AAS467701003 10
200 mm x 750 mm Grit 120 AAS467701203 10
200 mm x 750 mm Grit 150 AAS467701503 10
250 mm x 750 mm Grit 24 AAS467800243 10
250 mm x 750 mm Grit 36 AAS467800363 10
250 mm x 750 mm Grit 40 AAS467800403 10
250 mm x 750 mm Grit 60 AAS467800603 10
250 mm x 750 mm Grit 80 AAS467800803 10
250 mm x 750 mm Grit 100 AAS467801003 10
250 mm x 750 mm Grit 120 AAS467801203 10
- AbrasivesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
25
Sanding
Bona 8500 Aluminium Oxide Belt Where the lifetime of the abrasive is not in focus, Bona 8500 is the classic choice. The aluminium oxide in the abrasive delivers smooth and effective sanding results on a wide range of wooden floors. Together with the cotton cloth backing, 8500 does the job in most wooden floor situations where no extra sanding performance is required.
Key Benefits:
• Cotton cloth backing • Standard abrasive
200 mm x 750 mm Grit 16 AAS468000163 10
200 mm x 750 mm Grit 24 AAS468000243 10
200 mm x 750 mm Grit 36 AAS468000363 10
200 mm x 750 mm Grit 40 AAS468000403 10
200 mm x 750 mm Grit 50 AAS468000503 10
200 mm x 750 mm Grit 60 AAS468000603 10
200 mm x 750 mm Grit 80 AAS468000803 10
200 mm x 750 mm Grit 100 AAS468001003 10
200 mm x 750 mm Grit 120 AAS468001203 10
250 mm x 750 mm Grit 16 AAS468200163 10
250 mm x 750 mm Grit 24 AAS468200243 10
250 mm x 750 mm Grit 36 AAS468200363 10
250 mm x 750 mm Grit 40 AAS468200403 10
250 mm x 750 mm Grit 50 AAS468200503 10
250 mm x 750 mm Grit 60 AAS468200603 10
250 mm x 750 mm Grit 80 AAS468200803 10
250 mm x 750 mm Grit 100 AAS468201003 10
250 mm x 750 mm Grit 120 AAS468201203 10
Abrasives Aluminium Oxide Dimension Grit Article number Packaging Pcs/transport package
- Abrasives
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
26
Sanding
Bona 2921 Aluminium Oxide Belt Where the lifetime of the abrasive is not in focus, Bona 8500 is the classic choice. The aluminium oxide in the abrasive delivers smooth and effective sanding results on a wide range of wooden floors. Together with the cotton cloth backing, 8500 does the job in most wooden floor situations where no extra sanding performance is required.
Key Benefits:
• Cotton cloth backing • Standard abrasive
200 mm x 750 mm Grit 36 AAS439500363 10
200 mm x 750 mm Grit 40 AAS439500403 10
200 mm x 750 mm Grit 60 AAS439500603 10
200 mm x 750 mm Grit 80 AAS439500803 10
200 mm x 750 mm Grit 100 AAS439501003 10
200 mm x 750 mm Grit 120 AAS439501203 10
Abrasives for Bona Scorpion Dimension Grit Article number Packaging Pcs/transport package
Bona 8500 Aluminium Oxide Sleeve Sleeves designed for Bona Scorpion and Bona Scorpion DCS.
200 mm x 480 mm P 36 AAS472500363
200 mm x 480 mm P 40 AAS472500403
200 mm x 480 mm P 60 AAS472500603
200 mm x 480 mm P 80 AAS472500803
200 mm x 480 mm P 100 AAS472501003
200 mm x 480 mm P 120 AAS472501203
Abrasives Aluminium Oxide Dimension Grit Article number Packaging Pcs/transport package
- AbrasivesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
27
SandingAbrasives Silicon Carbide Dimension Grit Article number Packaging Pcs/transport
package
Bona 8100 Silicon Carbide Roll Where the lifetime of the abrasive is not in focus, Bona 8100 is the classic choice. The silicon carbide in the abrasive delivers smooth and effective sanding results on a wide range of wooden floors. 8100 does the job in most wooden floor situations where no extra sanding performance is required.
Key Benefits:
• Grit 16–36: cotton cloth backing • Grit 40–120: F-paper backing
203 mm x 25 m Grit 16 AAS466000161 1
203 mm x 25 m Grit 24 AAS466000241 1
203 mm x 25 m Grit 36 AAS466000361 1
203 mm x 25 m Grit 40 AAS466000401 1
203 mm x 25 m Grit 50 AAS466000501 1
203 mm x 25 m Grit 60 AAS466000601 1
203 mm x 25 m Grit 80 AAS466000801 1
203 mm x 25 m Grit 100 AAS466001001 1
203 mm x 25 m Grit 120 AAS466001201 1
203 mm x 25 m Grit 150 AAS466001501 1
250 mm x 25 m Grit 16 AAS466100161 1
250 mm x 25 m Grit 24 AAS466100241 1
250 mm x 25 m Grit 36 AAS466100361 1
250 mm x 25 m Grit 40 AAS466100401 1
250 mm x 25 m Grit 50 AAS466100501 1
250 mm x 25 m Grit 60 AAS466100601 1
250 mm x 25 m Grit 80 AAS466100801 1
250 mm x 25 m Grit 100 AAS466101001 1
250 mm x 25 m Grit 120 AAS466101201 1
305 mm x 25 m Grit 16 AAS466200161 1
305 mm x 25 m Grit 24 AAS466200241 1
305 mm x 25 m Grit 36 AAS466200361 1
305 mm x 25 m Grit 40 AAS466200401 1
305 mm x 25 m Grit 50 AAS466200501 1
305 mm x 25 m Grit 60 AAS466200601 1
305 mm x 25 m Grit 80 AAS466200801 1
305 mm x 25 m Grit 100 AAS466201001 1
305 mm x 25 m Grit 120 AAS466201201 1
- Abrasives
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
28
Sanding
Bona Scrad Pad Pad for Bona FlexiSand 1.5 and Bona Buffer. The Bona Scrad System is a unique abrasive system specially suited for intermediate sanding between coats of varnish. It combines an abrasive Scrad Wing with a soft conditioning pad that cuts off wood fibers and smoothes out scratches at the same time. The Scrad Wing has a Velcro backing that easily attaches to the Scrad Pad. If you hate scratches then you’re going to love the Bona Scrad System.
Ø 407 mm x 8 mm Grit 320 AAS854303208 5
Ø 330 mm x 8 mm Grit 320 AA970740 5
Bona Scrad Wing Bona Scrad Wing with Velcro backing used with Bona Scrad Pad.
Delta Grit 120 AAS468601206 50
Delta Grit 150 AAS468601506 50
Delta Grit 220 AAS468602206 50
Smooth White – backing for sanding screen. Can also be used for buffing polish.
Tan (beige) – for polishing
Red – for daily cleaning
Green – for periodic cleaning and oil maintenace
Brown – for oil application
Rough Black – for heavy duty cleaning and polish stripping
Pads Type Article number Packaging Package/pallet
Bona Superpad 407 mm Pad for Bona FlexiSand 1.5 and Bona Buffer.
White AAS867300058 Ø 407 mm x 23 mm 5
Tan AAS867300038 Ø 407 mm x 23 mm 5
Red AAS867300048 Ø 407 mm x 23 mm 5
Green AAS867300028 Ø 407 mm x 23 mm 5
Brown AAS867300068 Ø 407 mm x 23 mm 5
Black AAS867300018 Ø 407 mm x 23 mm 5
Pads Dimension Grit Article number Packaging Pcs/transport package
- AbrasivesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
29
Sanding
Bona Wool Pad Pad for Bona FlexiSand 1.5 and Bona Buffer. The pad is made of genuine sheep wool for application of oil and polishing of oiled or waxed floors. Wool produces higher heat towards the surface compared to synthetic pads which improves the penetration of oil into the wood and accelerates the drying process. Contains natural lanolin (wool wax) for a satin finish. Highly recommended for Bona Oils.
Key Benefits:
• 100% wool pad
AA68071000 Ø 407 mm x 8 mm 8
Pads Type Article number Packaging Package/pallet
Bona Sanding Screen, double-sided 407 mm
Screen for Bona FlexiSand 1.5 and Bona Buffer. Sanding screens are used to prepare and condition the surface prior to coating. They are also used when cutting back the grain raise once the finish has been applied. Screens are extremely durable and the perfect product to be used when preparing an old, previously finished floor that is to be re-coated. For sanding all kinds of wooden and parquet floors.
Key Benefits:
• Non-clogging • Open mesh structure for improved dust extraction • Double-sided
Ø 407 mm Grit 60 AAS867100603 10
Ø 407 mm Grit 80 AAS867100803 10
Ø 407 mm Grit 100 AAS867101003 10
Ø 407 mm Grit 120 AAS867101203 10
Ø 407 mm Grit 150 AAS867101503 10
Ø 407 mm Grit 180 AAS867101803 10
Ø 407 mm Grit 220 AAS867102203 10
Screens Dimension Grit Article number Packaging Pcs/transport package
- Abrasives
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
30
SandingAbrasives Diamond Dimension Grit Article number Packaging Pcs/transport
package
Bona Diamond Abrasive 125 mm
Disc for Bona MultiDisc. Diamond Abrasives for superficial abrasion of all types of hard coatings especially pre-finished parquet, prior to overcoating with new varnish. Using the unique hardness of diamonds, one set of diamond abrasives lasts at least 100 m².
Key Benefits:
• Long lifetime • Very good adhesion on prefinished parquet
Ø 125 mm Grit 240 AAS471902408 12
Bona Diamond Abrasive 150 mm
Disc for Bona QuattroDisc and Bona PowerDrive. Diamond Abrasives for superficial abrasion of all types of hard coatings especially pre-finished parquet, prior to overcoating with new varnish. Using the unique hardness of diamonds, one set of diamond abrasives lasts at least 100 m².
Key Benefits:
• Long lifetime • Very good adhesion on prefinished parquet
Ø 150 mm Grit 80 AAS472000808 8
Ø 150 mm Grit 120 AAS472001208 8
Ø 150 mm Grit 240 AAS472002408 8
Bona Intermediate Pad Pad for Bona MultiDisc. Pressure-equalising foam insulation. Helps the sanding disc contour to the surface. Attach to Bona MultiDisc before attaching Diamond Abrasives.
Key Benefits:
• Good sanding result
Ø 125 mm AAS472102408 3
Ø 150 mm AAS472200008 4
Bona Cleaning Pad Pad for Bona MultiDisc. Picks up residual dust after sanding with diamond abrasive. Suitable for cleaning small floor areas.
Key Benefits:
• Dust pickup
Ø 125 mm AAS472300008 12
Ø 150 mm AAS472400008 8
- AbrasivesC
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
31
Sanding
Two-way belt for longer lifeDue to the unique Bona finger joint the belt abrasives last more than 20% longer than
traditional abrasives. Unlike these, Bona’s abrasive belts can be run in both directions so
both sides of the abrasive particles are used.
Heat-resistant stabilityThe friction in any sanding operation creates heat. All abrasives in the range of Bona
products are developed to be heat resistant. In practice, this secures stability – maintaining
the length of the belt when the temperature rises. This prevents the abrasive from moving
along the drum, delivering a perfect and smooth sanding result.
With Performance in Mind
Kevlar splicingsThe use of belt machines means abrasives are exposed to high forces. For that
reason, Bona belt abrasives are all Kevlar reinforced in the splicing. We make sure
that your abrasive lasts as long as expected.
Durable backingA long-lasting abrasive depends on more than aggressive sanding particles.
Bona abrasives have carefully selected backing materials, designed to meet the
requirements from every specific application.
To reduce time spent on replacing used abrasive discs, Bona offers the easy-to-switch
Velcro system on the back of several products. The disc may be fitted in place in one
easy action, ready to sand again in just a few seconds. The Velcro fittings are designed to
withstand the strong forces provided by the buffer machine.
Easy-to-switch Velcro fit
Anti-static for less cloggingThe Bona Abrasives range includes products with anti-static properties, which repel
dust from the disc surface. The dust may then be contained more easily by the Bona
DCS (Dust Containment System) or similar, ensuring improved working conditions for
the craftsman.
- Abrasives
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
32
CoatingsWhether you’re looking for shine, colour, slip resistance or durability, Bona has the ideal
finish for all types of wooden floors. Since the 1970s, we have been the world’s pioneer
in waterborne finishes, providing low-VOC, solvent-free solutions for every flooring need.
And this year, Bona continues to push sustainable innovation one step further by
introducing the ultimate in scratch, scruff and chemical resistance for high-traffic floors
– Bona Traffic HD.
On the following pages, you will discover all the finishes you need to create beautiful,
durable and easy-to-manage wooden floors.
1. Primers
2. Finishes
3. Naturale
4. Sportive System
5. Oils – Wear treatment
6. Oils – Effect treatment
7. Oils – Care treatment
8. Finishes - Effect treatment
9. Oils – Outdoor
10. Fillers & Repair
Coatings
33
Primers Type Article number Packaging Pcs/transport package
Package/pallet
Bona Prime Classic Bona Prime Classic is a high-solid, 1-component acrylate primer for use on wooden floors prior to overcoating with Bona waterborne finishes. It gives the surface a well-bodied appearance and reduces the risk of side bonding due to its flexibility. Bona Prime Classic features a non-yellowing surface that produces a light wood colouration and retains the natural appearance of the wood.
Key Benefits: Technical Data:
• A primer with light colouration and natural wood apperance
• Reduced risk of side bonding, i.e. especially suitable for end-grain floors, softwood plank floors and hardwood floors with underfloor heating • Compatible with all Bona’s waterborne topcoats• High solids content for a well-bodied surface• Approved by DIBt for better indoor air quality
Drying Time: 2 h at 20 °CCoverage: 8–10 m²/L (120–100 g/m²)
WB200013003 1 L 10 50
WB200020012 5 L 3 44
Bona Prime Intense Bona Prime Intense is a 1-component, 100% polyurethane primer for use on wooden floors prior to overcoating with Bona waterborne finishes. Bona Prime Intense produces a medium- rich wood colouration whilst providing increased ‘build’ on the wooden surface, improving wear resistance. Prime Intense should be used for the initial coat on floors that have been stained.
Key Benefits: Technical Data:
• The primer for even and rich wood colouration
• Prime Intense has a long open time and excel- lent flow to reduce the risk of uneven colouration • Being based on a pure polyurethane dispersion, it is strong and very easy to abrade with sanding disc or screen• Reduces potential for side bonding• Well-bodied surface
Drying Time: 1–2 h at 20 °CCoverage: 8–10 m²/L (120–100 g/m²)
WB250020001 5 L 3 44
Bona Prime Amberseal Bona Prime Amberseal is a truly innovative waterborne primer and offers an intense, rich and warm colouration to wooden floors. With excellent abradability, low VOC and fast drying time, Bona Prime Amberseal is your natural and safe alternative for the future.
Key Benefits: Technical Data:
• When a full and rich colouration is in demand
• Rich and warm colouration• Waterborne• Long open time• Excellent abradability• Even colouration• Low VOC• Fast drying
WB255020001 5 L 3 44
032-042-0528
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
34
Primers Type Article number Packaging Pcs/transport package
Package/pallet
Bona Prime Deep Bona Prime Deep is an oil-based primer intended to produce the enriched grain pattern and colour only previously attainable by using a product with a high solvent content. Bona Prime Deep is easy to apply with no risks of overlapping and contains less than 10% VOC.
Key Benefits: Technical Data:
• Problem-solver for timbers sensitive to waterborne coatings
• Problem-solver on many timbers sensitive to waterborne coatings such as smoked oak, steamed beech, timbers with high tannin content, cherry etc.• Easy to apply, long open time without risk of overlapping marks• Enriched appearance with heightened grain variation
Drying Time: Min. 12 and max. 72 hCoverage: 30–40 m²/L
GB100013001 1 L 6 80
BonaTraffic HD Bona Traffic HD is a waterborne 2-component 100% polyurethane finish for surface treatment on wooden floors in commercial areas or where the absolute highest expectations regarding wear resistance are demanded. Having less than 5% VOC, Bona Traffic HD meets the requirements of environmental certifications such as DIBt.
Key Benefits: Technical Data:
• Early performance development – ready to use 24 hours after coating
• Extreme durability and scratch resistance • Exceptionally fast hardness development • Full use of floor possible the following day • DIBt approved for low indoor emissions • Suitable for overcoating pre-finished floors • Complies to EN 14904:2006 (suitable friction for sports floors) • Low solvent content (VOC) < 5% • Very low odour
Silkmatt WT155346001 4.95 L 3 36
Matt WT155646001 4.95 L 3 36
Extra Matt WT155946001 4.95 L 3 36
BonaTraffic HD HardenerWH330045001 0.40 L 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
35
Finishes Type Article number Packaging Pcs/transport package
Package/pallet
Bona Traffic Bona Traffic is a 2-component, waterborne, 100% polyurethane finish for the surface treatment of wooden flors in commercial premises or wherever a high resistance to wear is required. Bona Traffic provides a clear, natural apperance.
Key Benefits: Technical Data:
• Superb wear and chemical resistance • Superb wear and chemical resistance• High scuff mark resistance • Meets EN 14904:2006 for slip resistance • Meets Ö-norm 2354 Category C for very heavy wear
Drying time: 3–4 h at 20°CCoverage: 8–10 m2/L (120–100 g/m2)
Silkmatt WT153346001 4.95 L 3 36
Matt WT153646001 4.95 L 3 36
BonaTraffic Hardener WH341045001 0.45 L 1
Bona Traffic Anti Slip Bona Traffic Anti Slip is a 100% polyurethane 2-component waterborne finish offering exceptional durability and protection for wooden floors. It has all of the features of Bona Traffic but with the additional benefit of being formulated to meet the highest standards for slip resistance in workplaces and other situations with an increased risk of wet spills. With its higher friction, Bona Traffic Anti Slip is an ideal choice for stairs, nurseries, kitchens and similar locations.
Key Benefits: Technical Data:
• Classified R10 according to DIN 51 130 • Superb wear and chemical resistance• High scuff mark resistance • Meets EN 14904:2006 for slip resistance • Meets Ö-norm 2354 Category C for very heavy wear
Drying time: 3–4 h at 20°CCoverage: 8–10 m2/L (120–100 g/m2)
WT153646001 4.95 L 3 36
032-042-0527
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
36
Finishes Type Article number Packaging Pcs/transport package
Package/pallet
Bona Mega Bona Mega is a 1-component, waterborne, 100% polyurethane finish for commercial and domestic areas subject to heavy wear. As crosslinking is achieved using oxygen in the air, Bona Mega offers the performance of a 2-component finish without requiring a separate hardener.
Key Benefits: Technical Data:
• Crosslinking with the air • High resistance to wear, scuff marks and scratches• Very good chemical resistance• Relaxes wooden floors through low permeability• Meets DIN 18032:2 for slip resistance (gloss, silkmatt & matt)
Drying Time: 2.5–3 h at 20 °CCoverage: 8–10 m²/L (120–100 g/m²)
Gloss WT133013002 1 L 10 50
Gloss WT133020002 5 L 3 44
Silkmatt WT133313002 1 L 10 50
Silkmatt WT133320002 5 L 3 44
Matt WT133613001 1 L 10 50
Matt WT133620001 5 L 3 44
Extra Matt WT133920001 5 L 3 44
Bona Novia Bona Novia is a 1-component, waterborne finish for the treatment of floors in homes and light commercial areas subject to normal wear. Requires no primer and produces an even, warm colouration.
Key Benefits: Technical Data:
• Easy to use, no primer needed • Self-crosslinking, acts as a 2-comp. product but without requiring any mixing• Good resistance to wear, chemicals and scuff marks • Non-yellowing• Quick drying
Drying Time: 2 h at 20 °CCoverage: 8–10 m²/L (120–100 g/m²)
Gloss WT230013001 1 L 10 50
Gloss WT230020001 5 L 3 44
Gloss WT230024001 10 L 2
Silkmatt WT230313001 1 L 10 50
Silkmatt WT230320001 5 L 3 44
Silkmatt WT230324001 10 L 2
Matt WT230613001 1 L 10 50
Matt WT230620001 5 L 3 44
Matt WT230624001 10 L 2
032-042-0526
032-042-052
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
37
Finishes Type Article number Packaging Pcs/transport package
Package/pallet
Bona Resident Plus Bona Resident Plus is a waterborne 1-component finish based on acrylic resin, specially designed for surface treatment on wooden floors in the domestic environment. Featuring a good balance between performance and commercial aspects, Bona Resident Plus is the competitive choice for securing an excellent Bona floor finish in the home environment.
Key Benefits: Technical Data:
• The competitive choice for home environments
• Well-bodied surface • High viscosity with good levelling• Clear, non-yellowing• Good scuff and chemical resistance• Great wear resistance for residential use • Can be used without base coat • Low VOC ( < 5%)
Gloss WT201020001 5 L 3 44
Gloss WT201024001 10 L 2
Silkmatt WT201320001 5 L 3 44
Silkmatt WT201324001 10 L 2
Matt WT201620001 5 L 3 44
Matt WT201624001 10 L 2
Bona Crosslinker An additive designed for use with Bona Mega, Bona Novia and Bona Resident Plus. It acts as an adhesion promoter for overcoating-compatible pre-finished or previously coated floors. The addition is only required in the initial Bona Mega coat. Additions should be made at the rate of 4%, following the dilution of Bona Crosslinker with an equal quantity of water i.e. 2% Bona Crosslinker and 2% water.
Key Benefits:
• Improves adhesion and chemical resistance in Bona Mega• Used together with Bona Mega when overcoating previously finished surfaces
WH350005016 0.1 L 12
032-042-1877
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
38
Naturale Type Article number Packaging Pcs/transport package
Package/pallet
Bona Naturale 1-Comp Bona Naturale combines the best from wood oil, hard wax oil and waterborne finishes with a unique natural look and feel. Ideal for surface treatment of wooden residential floors subject to medium wear. The unique composition of Bona Naturale recreates the look and feel of pure wood. It is waterborne, made partly of renewable resources, and contains less than 5% solvents.
Key Benefits: Technical Data:
• Look and feel of pure wood • Two layers only – a true one-day system• Can be spot repaired• High resistance to wear, scuff marks and scratches• Good chemical resistance to household chemicals
WT180646001 4.5 L 3 44
Bona Naturale Base Bona Naturale Base is designed to be applied before Bona Naturale 2-Comp. Bona Naturale Base might also be used instead of the initial coat when applying Bona Naturale 1-Comp. Bona Naturale Base reduces the risk of side bonding and discolouration, it is waterborne and contains less than 10% solvents.
Key Benefits: Technical Data:
• Look and feel of pure wood • The Naturale system creates the look and feel of pure wood• Even wood colouration• Prevents side bonding• Designed for Bona Naturale 2-Comp or 1-Comp • The Naturale system can be spot repaired
WB270646001 4.5 L 3 44
Bona Naturale 2-Comp Bona Naturale combines the best from wood oil, hard wax oil and waterborne finishes with a unique natural look and feel. Bona Naturale 2-component is a product for surface treatment of wooden commercial floors subject to heavy wear. The unique composition of Bona Naturale recreates the look and feel of pure wood.
Key Benefits: Technical Data:
• Look and feel of pure wood • Can be spot repaired• A complete system with the Bona Naturale Base• EC1-R certified (very low emission)
WT190646001 4.5 L 3 36
Bona Naturale Hardener WH341041001 0.4 L 1
032-042-0525
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
39
Sportive System Type Article number Packaging Pcs/transport package
Package/pallet
Bona Sportive Primer Bona Sportive Primer is a 1-component, waterborne primer for use on unfinished sports floors, or those sanded back to bare wood. This should then be overcoated with Bona Sportive Finish. Designed to cope with the flexing of sports floors, it also enhances the natural beauty of the wood.
Key Benefits: Technical Data:
• Creates the perfect foundation for demanding sport floors
• High solids content• Well-bodied surface• Enhanced natural wood colour
Drying Time: 2–2.5 h at 20 °CCoverage: 8–10 m²/L (120–100 g/m²)
WB250024001 10 L 2
Bona Sportive Finish Bona Sportive Finish is a 2-component, waterborne 100% polyurethane finish for the surface treatment of wooden sports floors in both specialist and multi-purpose environments.
Key Benefits: Technical Data:
• Bona Sportive System, for any demanding sport floor
• High resistance to wear, scuff marks and scratches• Very good chemical resistance• Meets EN 14904:2006 and DIN 18032:2 for slip resistance
Drying time (at 20°C) for – sanding: 2.5–3 h light use: 8 h – full hardness: 7 daysCoverage: 8–10 m²/L (120–100 g/m²)
Gloss WT134024001 10.4 L 2
Matt WT134624001 10.4 L 2
Bona Sportive Finish Hardener WH350008001 0.4 L 1
Bona masking tape Bona masking tape is flexible enough to be applied both in straight lines as well as in circular shapes without the creation of wrinkles in the tape surface. The tape stays fixed to the floor during the painting and prevents seepage of paint under the tape.
25 mm width AX34200000 50 m 72C
oatin
gsFl
oor
Car
eA
cces
sorie
sFa
sten
ing
San
din
g
Coatings
40
Sportive System Type Article number Packaging Pcs/transport package
Package/pallet
Bona Sportive Paint Bona Sportive Paint is a specialised line and court marking paint for use on finished wooden sport floors. Can be used to paint line markings but also complete court borders and zones. Available in eight mixable vibrant colours to achieve an endless array of shades.
Key Benefits: Technical Data:
• Time saving – Quick drying and no sanding on paint required before overcoating
• Excellent flow and levelling• Superb opacity / hiding ability• Reduces work time – fast drying and no sanding required before overcoating• Excellent adhesion properties• Odourless• Application rate: 6–10 m²/L per coat = 120–200 m of a 50 mm wide line
Yellow WC410155001 1.75 L 2 36
Red WC420155001 1.75 L 2 36
Orange WC420255001 1.75 L 2 36
Light Blue WC430155001 1.75 L 2 36
Dark Blue WC430255001 1.75 L 2 36
Green WC440155001 1.75 L 2 36
Black WC470155001 1.75 L 2 36
White WC490155001 1.75 L 2 36
Bona Sportive Cleaner Bona Sportive Cleaner is a concentrated, slightly alkaline detergent, specifically designed for the frequent cleaning of finished wooden sports floors.
Technical Data:
• Specifically designed for finished wooden sports floors• Slightly alkaline detergent• Easy to use
WM640013024 1 L 10 50
WM640020007 5 L 3 44
Bona Sportive Cleaner Plus Bona Sportive Cleaner Plus is a concentrated alkaline detergent, designed for occasional cleaning of sports floors to remove the buildup of body fats from sweat and other contaminants. Also restores the slip resistance on floors that have become slippery over time. It may also be used to remove black heel marks and scuff marks.
Technical Data:
• Coverage: 1 L to 5 L of water• Removal of black heel marks / scuff marks: 1 cap / 100 ml of water
WM650013017 1 L 10 50
WM650020006 5 L 3 44
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
41
Bona Oils for Unique Expressions The all-new Bona Oil System
The all-new Bona Oil System brings out the true character of wooden
floors. The innovative range’s 2-dimensional design effects create
stunning expressions through highlights and stark contrasts.
From design and protection to maintenance and care, this complete
system is all you need for a long-lasting, beautiful oiled wooden floor
with low VOC levels over its lifetime.
Coatings
42
Oils – Wear treatment Type Article number Packaging Pcs/transport package
Package/pallet
Bona Craft Oil With superior wood saturation properties, Bona Craft Oil delivers deep protection against wear, chemicals and moisture. A natural vegetable oil, it has virtually no odour and significantly lowered VOC. This means that it is safe to work with and live on. Suitable for wooden floors in public and domestic environments as well as for furniture and other woodwork.
Key Benefits: Technical Data:
• Time-saving application • Extremely high degree of saturation• Rapid drying and easy to apply• Low solvent content, below 4% and low odour• Safe for application on children’s toys and countertops, EN 71-3 compliant
Neutral GT560115001 2.5 L 4
Neutral GT560120001 5 L 2
Frost GT561115001 2.5 L 4
Frost GT561120001 5 L 2
Clay GT562115001 2.5 L 4
Clay GT562120001 5 L 2
Graphite GT563115001 2.5 L 4
Graphite GT563120001 5 L 2
Ash GT564115001 2.5 L 4
Ash GT564120001 5 L 2
Umbra GT565115001 2.5 L 4
Umbra GT565120001 5 L 2
Bona Hard Wax Oil Bona Hard Wax Oil is a balanced blend of natural oils and waxes for surface treating of untreated wooden floors and other interior woodwork. Hard Wax Oil both impregnates the wood and creates a durable superficial film with excellent resistance to water and spills. Possible to combine with a coloured version of Bona Craft Oil for changing the look of the floor.
Key Benefits: Technical Data:
• Improves wear resistance • Extreme water resistance• Floor can be fully treated in one day • Excellent coverage • Safe for application on children’s toys and countertops, EN 71-3 compliant
Drying Time: 12 h at 20 °CCoverage: 20–24 m²/L
Silkmatt AF3100025 2.5 L 2
Silkmatt AF3102010 10 L 1
Matt AF3600025 2.5 L 2
Matt AF3602010 10 L 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
43
Oils – Effect treatment Type Article number Packaging Pcs/transport package
Package/pallet
Bona Mix Colour Bona Mix Colour is a concentrated pigment paste for waterborne systems and specifically for Bona Nordic Tone and Bona Rich Tone. Added to either of these products it can intensify or change the colour of the Bona Tone to create a special effect. Note that the surface must always be complemented with an oil or hardwax oil treatment afterwards.
Technical Data:
Content: Concentrated pigment pasteConsumption: 250 ml for one 5 L bottle (5%) of Bona Nordic Tone or Bona Rich Tone
Mahogany GX504007 0.25 L 12
Walnut GX504107 0.25 L 12
White GX504207 0.25 L 12
Grey GX504307 0.25 L 12
Black GX504407 0.25 L 12
Bona Nordic Tone
Key Benefits: Technical Data:
• For 2-dimensional light look effect • Rapid drying and easy to apply• Whiteness can be controlled by number of applications• Waterborne and completely odourless • Treatment schedules:
Alternative 11x Bona Nordic Tone1x Bona Craft Oil Neutral or Coloured1x Bona Hard Wax Oil
Alternative 21x Bona Nordic Tone1x Bona Craft Oil
Bona Nordic Tone is pre-treatment to Bona Craft Oil to create a the unique character of a Scandinavian white washed floor. Combined with Bona Craft Oil, which comes in different colours, you can create your desired Bona 2-dimensional effect. It inhibits wood yellowing and can be used on both softwood and hardwood. The colour intensity of Bona Nordic Tone can be changed or further intensified by adding up to 5% of any Bona Mix Colour.
WX700020001 5 L 3
Bona Rich Tone
Key Benefits: Technical Data:
• For 2-dimensional smoked look effect • Rapid drying and easy to apply• Waterborne and completely odourless alkaline solution • Apply with a Bona Oil application sleeve• Consumption: approx. 8–10 m²/litre depending on wood type• Treatment schedules:
Alternative 11x Bona Rich Tone1x Bona Craft Oil1x Bona Hardwax Oil
Alternative 21x Bona Rich Tone2x Bona Hardwax Oil
Bona Rich Tone brings out your floor’s deepest colours and give your home the unmistakable touch of elegance. For lasting protection and enhanced colouration, the unique formulation of Bona Rich Tone requires it to be combined with Bona Hard Wax Oil. The surface is later treated with Bona Craft Oil and/or Bona Hardwax Oil directly, depending on the desired colour effect and level of protection needed. To further enhance or change the colour of Bona Rich Tone, up to 5% of the desired Bona Mix Colour can be added.
WX900020001 5 L 3
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
44
Oils – Care treatment Type Article number Packaging Pcs/transport package
Package/pallet
Bona Care Oil Bona Care Oil is a rapid drying maintenance oil for previously oiled wooden floors. The low viscous, unique blend of different vegetable oils, has excellent penetration ability and produces very little odour. Replenishes the pores of the wood for long-lasting protection.
Key Benefits: Technical Data:
• Great coverage • Low viscosity oil with very good workability • Low in VOC ( < 8%) and odour• Safe for application on children’s toys and countertops, EN 71-3 compliant
Coverage: 50–100 m² depending on condition of floor
GT525113001 1 L 12
GT525120001 5 L 2
Bona Wax Oil Refresher Bona Wax Oil Refresher is a concentrate of natural oils and waxes which gently removes dirt, grime and marks on oiled wooden floors. Specially formulated to be used weekly and to keep the floor at its best condition. Bona Wax Oil Refresher can be used on both Bona Hard Wax Oil and Bona Craft Oil, for increased protection against water and spills.
Key Benefits: Technical Data:
• Low VOC • Rapid drying and easy to apply• Low solvent content, below 2% and low odour• Safe for application on children’s toys and countertops, EN 71-3 compliant
WP615013001 1 L 12
Finishes – Effect treatment Type Article number Packaging Pcs/transport package
Package/pallet
Bona Create Bona Create is a new formula bringing modern colours to all wooden floors. Having a long open time, application is relaxed and the result is an even and beautiful colouration. The new range includes 9 intermixable colours that can be blended to an almost unlimited palette of shades.
Key Benefits: Technical Data:
• Wood floor colouring with a relaxed application and without overlap marks
• Consistent colouration, no overlap marks• Long open time, easy to work with even on larger surfaces• High coverage rate of 30–40 m²/litre• Overcoatable with both oil and finish• Modern and fresh colours
Drying time: 24–72 hCoverage: Approx. 30–40 m²/L
Pure GT540013001 1 L 6
Amber GT542013001 1 L 6
Earth GT542113001 1 L 6
Coal GT547013001 1 L 6
Lava GT547113001 1 L 6
Stone GT547213001 1 L 6
Ice GT549013001 1 L 6
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
45
Bona Decking Oil– Long lasting protection for outdoor decks
• Long Lasting Protection• Protects wood from UV bleaching• Prevents cracks• Low VOC• High coverage
NEWFormula
Coatings
46
Oils – Outdoor Type Article number Packaging Pcs/transport package
Package/pallet
Bona Deck Oil Bona Deoking oil ensures your outdoor decking receives that long lasting protection through challanging days of rain, freezing snow and scorching sun. The new formula, containing very low amount of solvents,heavily enhances the protection propoerties.
Key Benefits:
• Improved UV protection for long lasting protection.• New formula with low VOC • Easy application - Ready in a day
Neutral GT551115001 2.5 L 4
GT551215001 2.5 L 4
Teak GT551315001 2.5 L 4
White GT551415001 2.5 L 4
Fillers & Repair Type Article number Packaging Pcs/transport package
Package/pallet
Bona Mix&Fill Plus Bona Mix&Fill Plus is a waterborne gap filler with a filling capacity equal to solvent-based alternatives. Its high filling capacity, short drying time and good abrasion properties make it an exceptionally reliable product. Under normal conditions you only need to apply it once, which means that you save time, money and effort. The product is mixed with wood dust from the actual floor to be treated, which gives a natural colouration that blends in with the rest of the floor. Bona Mix&Fill Plus can be used with most types of wood and for gaps up to 3 mm wide.
Key Benefits: Technical Data:
• A filler with high filling ability for floors with large joints
• For gaps up to 3 mm wide • High filling capability • Optimised for light to medium coloured timbers• Very low solvent content• Works with all Bona finishing and oil systems • Good environmental profile• Non-intense smell• Quick drying• Good sanding ability• Anti-corrosive
WF220020001 5 L 3 44
Bona Mix&Fill Bona Mix&Fill is a waterborne joint filler designed to be mixed to a suitable consistency with fine sanding dust from the floor being treated. For joints up to 2–3 mm width and other minor defects in wooden floors. Compatible with all Bona lacquers and oils.
Key Benefits: Technical Data:
• A filler for medium-sized floor gaps • No unpleasant smell• Fills the joints, does not slump• Waterborne, but anti-corrosive (no rust stains)• Always the right colour of the joint • Dries quickly• Easy to sand
WF21001301 1 L 10 50
WF21002001 5 L 3 44
4 colours
Mahogany
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Coatings
47
Bona Gap Master Bona Gap Master is a silicone-free mastic designed to fill gaps between parquet blocks, around skirting boards and door thresholds. Based on polyurethane and acrylate it contains no solvents, is odourless and can be used with all parquet finishes. It retains a high degree of flexibility. Expansion is approximately 7%.
Key Benefits: Technical Data:
• Very elastic• Possible to maintain with polish• Available in 14 colours, which can be mixed
Material: PolyacrylateDrying time: Approx. 18–24 h Full hardness is achieved after approx. 2–3days depending on climate and size of gap Consumption: Depending on the depth of the gap
RAL 7030 AF4411312500 310 ml 12 60
Beech AF4411311000 310 ml 12 60
Ash/fir AF4411311100 310 ml 12 60
Dark oak AF4411311200 310 ml 12 60
White AF4411311300 310 ml 12 60
Maple AF4411311400 310 ml 12 60
Light beech AF4411311500 310 ml 12 60
Light oak AF4411311600 310 ml 12 60
Cherry AF4411311700 310 ml 12 60
Bog oak AF4411311800 310 ml 12 60
Wenge AF4411311900 310 ml 12 60
Black AF4411312000 310 ml 12 60
Nut AF4411312100 310 ml 12 60
Teak AF4411312200 310 ml 12 60
Reddish exotic wood AF4411312300 310 ml 12 60
Fillers & Repair Type Article number Packaging Pcs/transport package
Package/pallet
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
Optimised UV coatings for prefinished floors
As the leading specialist in treatments for wooden floors,
Bona Industrial Coatings is a natural choice as a partner
for prefinished wooden floor producers. Our full system of
solutions helps support the entire lifetime of wooden floors
– from production and installation to treatment and care.
Bona UV-based coatings deliver the best adhesion and the
highest levels of wear and scratch resistance. And as a guarantee
of our commitment, as long as your floors are prefinished with
Bona UV coatings, we offer Lifetime Support to ensure that your
wooden floor surface is perfect throughout its lifetime.
Bona Industrial Coatings
49
Floor CareProper maintenance is vital when it comes to retaining the long-lasting beauty of wooden
floors. Bona’s floor care solutions are specially developed for cleaning and revitalising your
wooden floors and are tailor made for all finished, oiled and engineered surfaces.
This year, we introduce a revolutionary floor-revitalising solution, Bona Deep Clean
System. Floor owners can now instantly bring back the original lustre of their wood
floors with a unique service that effectively removes the toughest dirt and scuff marks.
Read more about Bona Deep Clean Service and other best-in-class floor care solutions
for both professional users and private homeowners in the following pages.
1. Deep Clean System
2. Finishes – Maintenance
3. Oils – Maintenance
50
Floor CareDeep Clean System Type Article number Packaging Pcs/transport
packagePackage/
pallet
Bona PowerScrubber The Bona PowerScrubber is a compact, powerful scrubbing machine for cleaning varnished and oiled wooden floors. When used with Bona Deep Clean Solution, it removes the toughest dirt and grime from wooden floors with ease. The two counter-rotating cylindric brushes cleans deeply, even on rough, brushed parquet and wooden floors with bevelled edges. The rubber squeegees ensure an extremely effective water pickup, which makes it safe to use on wooden floors.
Technical Data:
Motor rating: Max. 2700 W, avg. 1900 WPower supply: 220–240 V / 50 HzMachine weight: 34.5 kgScrubbing brush: 2 x 400 mm soft white nylonBrush rpm: 1100Solution capacity: 10 LRecovery tank capacity: 10 LDimensions: 520 mm x 470 mm x 300 mm 10 m extension cableRecommended detergents: Bona Deep Clean Solution, Bona Cleaner
AM400201100 1
Roller Brush For oiled or laquered floors.
White AS3647622500 400 mm 1
Orange AS3647622510 400 mm 1
Red AS3647624580 400 mm 1
Green AS3647622520 400 mm 1
Black AS3647624810 400 mm 1
Suction bar Suction bar complete.
AS3647773230 400 mm 1
Bona Deep Clean Solution Bona Deep Clean Solution is a concentrated cleaner for thorough, deep cleaning of varnished and oiled wooden floors. The unique formula delivers optimal cleaning efficiency and removes stubborn scuff marks without risk of staining the wood. Use it to revitalise dull wooden floors or to reset and degrease the surface before applying maintenance polish or oil. Can be used with scrubber driers and is particularly suited for the Bona PowerScrubber. Can also be used for manual cleaning. Try and experience a new level of clean.
Key Benefits: Technical Data:
• Safe on wood • Revitalises dull, dirty floors• Dissolves deeply ingrained dirt and stubborn scuff marks • Safe and extremely effective • Optimised for Bona PowerScrubber
WM650020010 5 L 3
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
51
Floor Care
Bona Polish Two new polyurethane-enhanced polish formulations delivering an extremely durable surface. With a choice of Gloss or Matt finish, for sealed wooden floors.
Technical Data:
Application tools: Bona Microfiber Applicator PadCoverage: Approx. 50 m²/LPolish gloss – DIN 18032:2 for slip resistance
Matt WP500313001 1 L 10 50
Matt WP500320001 5 L 3
Gloss WP511013001 1 L 10 50
Gloss WP511020001 5 L 3
Bona Freshen Up Bona Freshen Up is a ready-to-use waterborne polyurethane maintenance coating for most finished and pre-finished wooden floors. Bona Freshen Up will revive a scratched and dull surface in addition to providing continued protection against wear. Allows for future applications of professional finish.
Technical Data:
• Specifically designed for finished wooden floors• Based on polyurethane – superb protective qualities• Contains no waxes• Meets EN 14904:2006 and DIN 18032:2 for slip resistance
Coverage: Approx. 30–50 m²/L
WP595013016 1 L 10 50
WP595020002 5 L 3
Bona Prep Bona Prep is a ready-to-use conditioning/preparation system designed to optimise the adhesion of Bona’s varnishes prior to overcoating previously varnished floors or pre-finished parquet. The use of Bona Prep within a system ensures that the best possible level of adhesion is obtained – combined with a good level of abrasion on the floor surface.
Technical Data:
• Optimises conditions before overcoating with new varnish• Convenient – pre-mixed and ready to use• Removes scuff marks and deep dirt
WM660020001 5 L 3
Bona Remover Bona Remover is a concentrated polish stripper designed to remove Bona Polish and Bona Freshen Up. It can also be used to treat floors which have become slippery and for the removal of black heel marks.
Technical Data:
• For removal of polish: 1 L to 5 L of water• For removal of scuff marks: 1 cap to 100 ml of water
WM650013023 1 L 10 50
Finishes – Maintenance Type Article number Packaging Pcs/transport package
Package/pallet
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
52
Sports floors must endure extreme stress on their surface, every
day. Bona Sportive is the easiest way to meet the demands of
modern top sports. Today thousands of sports halls around the world
rely on Bona Sportive for a great sports performance.
Already covering more than 12 million m2 worldwide, Bona Sportive is a
full system for treating, maintaining and renovating wooden sports floors.
Ask us about the latest norms and standards for sports floors.
Ready for Action Bona Sportive System – for top sports floor performance
We are a FIBA certified partner
53
Floor CareFinishes – Maintenance Type Article number Packaging Pcs/transport
packagePackage/
pallet
Bona Cleaner New formulation for powerful, low-foaming cleaning of sealed wooden floors. For use with auto- scrubber or conventional cleaning methods. A pH neutral detergent which leaves no residue.
Technical Data:
• Specifically designed for finished wood and cork floors• Efficient, low-foaming formula• Leaves no dulling residue• For daily maintenance and deep cleaning• Normal cleaning: 100 ml to 10 L of water• Heavily soiled floors: 200 ml to 10 L of water
WM760013001 1 L 10 50
WM760020001 5 L 3
Bona Sportive Cleaner Bona Sportive Cleaner is a concentrated, slightly alkaline detergent, specifically designed for the frequent cleaning of finished wooden sports floors.
Technical Data:
• Specifically designed for finished wooden sports floors• Slightly alkaline detergent• Easy to use
WM640013024 1 L 10 50
WM640020007 5 L 3 44
Bona Sportive Cleaner Plus Bona Sportive Cleaner Plus is a concentrated alkaline detergent, designed for occasional cleaning of sports floors to remove the buildup of body fats from sweat and other contaminants. Also restores the slip resistance on floors that have become slippery over time. It may also be used to remove black heel marks and scuff marks.
Technical Data:
• Coverage: 1 L to 5 L of water• Removal of black heel marks / scuff marks: 1 cap / 100 ml of water
WM650013017 1 L 10 50
WM650020006 5 L 3 44
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
54
Floor CareOils – Maintenance Type Article number Packaging Pcs/transport
packagePackage/
pallet
Bona Care Oil Bona Care Oil is a rapid drying maintenance oil for previously oiled wooden floors. The low viscous, unique blend of different vegetable oils, has excellent penetration ability and produces very little odour. Replenishes the pores of the wood for long-lasting protection.
Key Benefits: Technical Data:
• Great coverage • Low viscosity oil with very good workability • Low in VOC (<8%) and odour• Safe for application on children’s toys and countertops, EN 71-3 compliant
Coverage: 50–100 m² depending on condition of floor
GT525113001 1 L 12
GT525120001 5 L 2
Bona Wax Oil Refresher Bona Wax Oil Refresher is a concentrate of natural oils and waxes which gently removes dirt, grime and marks on oiled wooden floors. Specially formulated to be used weekly and to keep the floor at its best condition. Bona Wax Oil Refresher can be used on both Bona Hard Wax Oil and Bona Craft Oil, for increased protection against water and spills.
Key Benefits: Technical Data:
• Low VOC • Rapid drying and easy to apply• Low solvent content, below 2% and low odour• Safe for application on children’s toys and countertops, EN 71-3 compliant
WP615013001 1 L 12
Bona Soap Detergent based on vegetable oils and waxes. For gentle removal of dirt, grime and marks on oiled wooden floors. Specially formulated to be used weekly to keep the floor at its best condition.
Key Benefits: Technical Data:
• Conditions the oiled floor • Specifically designed for oiled wooden floors• Suitable for both homes and commercial buildings• Cleans and nourishes the surface• Restores some grease to the surface
Coverage: 0.2 L / 10 L of water
WM700013005 1 L 12
WM700020001 5 L 3
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
55
Tools & AccessoriesPerfect wooden floors can only be achieved with the right tools for the job. Through
decades of working closely with craftsmen, Bona has come to understand their every
requirement when it comes to working with wooden floors. That is why our tools and
accessories are expertly developed for seamless compatibility with all our flooring
products. From rollers and gun applicators to dust bags and floor care tools, you will
find all the equipment you need for every wood-flooring task in this section.
56
Tools & Accessories
Accessories Type Article number Packaging Pcs/transport package
Package/pallet
Roller Sport Floor A roller for the larger areas which fits well with all Bona water-based finishes.
45 cm AT31451000 1
Roller MicroFleece Roller for waterborne finishes with side discs which help to maintain a consistent application rate by making it impossible to put too much pressure on the roller.
25 cm AT31001000 1
Roller Blue Candy Stripe Synthetic roller for the application of lacquer. Designed specifically for the application of Bona waterborne finishes.
25 cm AT959302 1
Mohair Roller, Medium Pile Synthetic roller for the application of oils and waxes.
25 cm AT31005000 1
Edge Roller Small-sized roller for varnishing/painting edges of floor.
10 cm AT31003000 1
Handle Edge Roller Handle for edge roller.
10 cm AT31004000 1
Roller Handle Blue, quick release Fits on Extension bars AT31401001 and AT31401002.
25 cm AT31014001 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
57
Tools & Accessories
Accessories Type Article number Packaging Pcs/transport package
Package/pallet
Bona Extension Bar, quick release A sturdy 2-piece extension bar with quick release for Roller Handle AT31014001. Offers long reach of 200 cm unfolded.
110–200 cm AT31401002 1
Bona Rollerbox Keeps the roller moist and safe during storage and transportation.
Red / Grey AT31405000 1
AT956901 1
Oil Application Sleeve Sleeve made of synthetic fiber for application of low viscous oil.
45 cm AT954224 1
Swivel Head Applicator Applicator head for oil application sleeve.
45 cm AT954225 1
Applicator Sleeve Foam and synthetic fiber sleeve for applying varnish.
46 cm AT956903 1
Swivel Head Applicator Jointed applicator head for applicator sleeves.
46 cm AT956904 1
Oil Applicator Rubber An oil applicator which offers fast application. Fits on Extension bars AT31401001 and AT31401002.
AT31302001 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
58
Tools & Accessories
Accessories Type Article number Packaging Pcs/transport package
Package/pallet
Disposable Booties One way plastic shoe covers.
AT33051000 50
Trowel Stainless Steel Stainless steel trowel, for Bona Prime Trowel, Bona Mix&Fill Plus etc.
27 cm AT959201 1
35 cm AT31360350 1
Scraper A floor scraper for hard-to-reach areas such as corners, and areas close to the skirting board.
4 cm AT929502 1
Extra U-blade for Scraper 4 cm AT929503 1
2 cm AT929504 1
Cotton Cloth Rip-resistant cotton cloths for oiling, cleaning and buffing jobs.
50 x 55 cm AX954235 10 pcs
Bona Wax Repair Kit Repair set for wood and laminate floors, containing 20 pieces of repair sticks. Sticks in 22 colours available separately.
AT32053600 1
Spike Roller For venting leveling compounds.
50 cm AT32052500 1
Coa
tings
Floo
r C
are
Acc
esso
ries
Fast
enin
gS
and
ing
59
Application Advice1. Prime Deep System
2. Finish System
3. Naturale System
4. Sportive System
5. Create Systems
6. Oil System
7. Hard Wax Oil System
60
1.
3.
2.
4.
5.
7.
6.
10.
11.
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander.
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
Application – Prime Deep
Remove surplus with Bona FlexiSand or Bona Buffer and use cotton cloths
Application – Prime Intense after min. 12 h
3rd applicaton – with the same Bona top coat as used before
If extreme traffic is expected, an additional application of top coat is recommended
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Consumption: 8–10 m2/ltDrying time: 3–4 h
(20 °C, 60%)
Consumption: 30–40 m2/lt
Prime Deep System
9.
Intermediate sanding with Bona FlexiSand or Bona Buffer and Bona Scrad System8.
2nd application – Choose one of the below Bona top coats and apply with Bona Roller
Bona Resident PlusConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
or
Bona NoviaConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Bona MegaConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
or
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
or
Bona WaveConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
Domestic wear Heavy wear Very heavy wear
Bona Traffic HDConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
or
61
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
1st application – Choose one of the below Bona base coats and apply with Bona Roller
Intermediate sanding with Bona FlexiSand 1.5 or Bona Buffer
3rd applicaton – with the same Bona top coat as used before
If extreme traffic is expected, an additional application of top coat is recommended
2nd application – Choose one of the below Bona top coats and apply with Bona Roller
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Bona Resident PlusConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
or
Bona NoviaConsumption:8–10 m2/ltDrying time: 2 h(20 °C, 60%)
Prime Trowel/Gel3x with a trowel
Consumption:25–35 m2/ltDrying time: 10–15 mins(20 °C, 60%)
Prime AmbersealDeep colour2x with a roller
Consumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Prime ClassicThe all-rounder
Consumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Prime IntenseIntensive colouration
Consumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Bona MegaConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C,60%)
or
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
or
Bona WaveConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
Domestic wear Heavy wear Very heavy wear
Finish System
6.
1.
2.
3.
4.
5.
7.
8.
9.
Bona Traffic HDConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
or
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
62
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
1st application – Bona Naturale Base with Bona Naturale Roller
Intermediate sanding with Bona FlexiSand 1.5 or Bona Buffer
Intermediate sanding with Bona FlexiSand 1.5 or Bona Buffer
3rd applicaton – Bona Naturale 2-comp. with Bona Naturale Roller
2nd application – Bona Naturale 1-comp. with Bona Naturale Roller
2nd application – Bona Naturale 2-comp. with Bona Naturale Roller
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Naturale BaseConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Naturale 1-comp.Consumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
Naturale 2-comp.Consumption:8–10 m2/ltDrying time: 3 h(20 °C, 60%)
Mix Naturale 2-comp. with hardener – shake for 2 mins
Naturale BaseConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Domestic wear Very heavy wear
Naturale System
6.
1.
2.
3.
4.
5.
7.
8.
9.
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
63
Application – Bona Mix&Fill Plus with a trowel
Sanding – Final with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
1st Application – Bona Sportive Primer with the Bona Roller
Application – Line marker with Bona Sportive Paint
Intermediate sanding with Bona FlexiSand 1.5 or Bona Buffer and Bona Scrad System
3rd and 4th application with Bona Sportive Finish with Bona Roller
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Sportive System
1.
3.
4.
5.
2nd Application – Bona Sportive Finish with the Bona Roller7.
8.
9.
10.
2.
Sportive PrimerConsumption: 8–10 m2/lt
Drying time: 2–3 h(20 °C, 60%)
Sportive Paint1 litre for approx. 80 m x 5 cm lines
1 litre for approx. 100 m x 4 cm lines
Intermediate sanding with Bona FlexiSand 1.5 or Bona Buffer6.
Sportive FinishConsumption: 8–10 m2/lt
Drying time: 2–3 h(20 °C, 60%)
Mix Sportive Finish with Sportive Hardener –
shake for 1 min
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
64
1.
3.
2.
4.
5.
7.
8.
6.
9.
10.
11.
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
Application – Bona Create
Remove surplus with cotton cloths
Application – Prime Intense after min. 24 hImportant: Surface must be completely dry
Intermediate sanding with Scrad System
3rd applicaton – with the same Bona top coat as used before
If extreme traffic is expected, an additional application of top coat is recommended
2nd application – Choose one of the below Bona top coats and apply with Bona Roller
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Bona Resident PlusConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
or
Bona NoviaConsumption:8–10 m2/ltDrying time: 1–2 h(20 °C, 60%)
Bona MegaConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
or
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
or
Bona WaveConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
Bona TrafficConsumption:8–10 m2/ltDrying time: 3–4 h(20 °C, 60%)
Consumption: 8–10 m2/ltDrying time: 3–4 h
(20 °C, 60%)
Consumption: 30–40 m²/lt
Domestic wear Heavy wear Very heavy wear
Create System
Bona Traffic HDConsumption:8–10 m2/ltDrying time: 2–3 h(20 °C, 60%)
or
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
65
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
Application – Bona Create
Allow to dry for 24 h, then apply Bona Naturale 1-comp.
1st application with Bona Roller Naturale 1-comp. or 2-comp.
If extreme traffic is expected, anadditional application is recommended
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Consumption: 7–9 m2/lt(140–110 g/m2)
Drying time: 1–2 h(20 °C, 60%)
Consumption: 7–9 m2/lt(140–110 g/m2)
Drying time: 2–3 h(20 °C, 60%)
Drying time: 2–3 h(20 °C, 60%)
Create System with Naturale
1.
3.
4.
5.
6.
7.
9.
10.
2.
Consumption: 30–35 m²/lt
Remove surplus with cotton cloths
8. Intermediate sanding with Scrad System
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
66
Application – Bona Mix & Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5
Application of Bona Oil System – Choose one of the 3 treatments
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Oil System
1.
3.
4.
5.
2.
Pure Oil treatment
Apply Bona Craft Oil with rubber blade, steel trowel or Bona Wool Pad until wood is saturated
Massage oil into wood using green pad for neutral oil, or red pad for coloured oil, attached to Bona FlexiSand 1.5
Remove surplus oil with cotton cloth and allow to dry
For best results dry buff surface with Bona Wool Pad.
Apply Bona Nordic Tone with an applica-tion sleeve. Leave to dry for 4–5 hours
Fine sanding using Bona FlexiSand 1.5 and Bona Scrad Pad. Remove dust with a vacuum cleaner
Apply Bona Craft Oil with rubber blade, steel trowel or Bona Wool Pad until wood is saturated
Massage oil into wood with red pad attached to Bona FlexiSand 1.5
Remove surplus oil with cotton cloth and allow to dry
For best results dry buff surface with Bona Wool Pad. If applicable, use high-speed setting on Bona FlexiSand 1.5
Apply Bona Rich Tone with an applica-tion sleeve. Leave to dry for 4-5 hours
Fine sanding using Bona FlexiSand 1.5 and Bona Scrad Pad. Remove dust with a vacuum cleaner
Apply Bona Craft Oil with rubber blade, steel trowel or Bona Wool Pad until wood is saturated
Massage oil into wood with red pad attached to Bona FlexiSand 1.5
Remove surplus oil with cotton cloth and allow to dry
For best results dry buff surface with Bona Wool Pad. If applicable, use high-speed setting on Bona FlexiSand 1.5
Apply a thin coat of Bona Hard Wax Oil. Allow 8–10 hours for drying
Oil treatment with Bona Nordic Tone
Oil treatment with Bona Rich Tone
Bona Nordic ToneConsumption:8–10 m2/LDrying time: 2–3 h(20 °C, 60%)
Bona Rich ToneConsumption:8–10 m2/LDrying time: 2–3 h(20 °C, 60%)
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
67
Application – Bona Mix&Fill Plus with a trowel
Sanding – Fine with Bona Belt and Bona Edge Sander
Sanding – Final with Bona FlexiSand 1.5 or Bona Buffer
Consumption: 8–12 m2/ltDrying time: 15–30 mins
(20 °C, 60%)
Hard Wax Oil System
1.
3.
4.
2.
Matt/Silkmatt5.
1st application with Bona Hard Wax Oil. Apply a thin layer with a mohair roller
Abrade with Bona Scrad Pad
2nd application: very thin with a mohair roller
5.1
5.2
5.3
Bona Hard Wax OilConsumption: depending on type of wood – approx. 1 litre for 20–24 m2. Drying time: 6–8 h
Application tool: Bona Roller – mohair
Sanding – Coarse and medium with Bona Belt, Bona Power Drive and Bona Edge Sander
68
Adhesive Guidelines
FlooringEN/DINStandard Type
Consumption g/m2* R
770
R77
7/R
778
R84
4/R
845
R84
8
R85
0/R
850T
R86
0
R87
0T
D70
5
D71
0
D72
0
Parquet strip and mosaic parquet finger 1-layer (solid)unfinished elements
EN 13226 parquet strip of oak and similar wood types 1000/1250 –
EN 13226parquet strip of beech and similar highly-absorbent wood types
1000/1250 – – –
EN 13488 mosaic parquet finger 850 –
EN 13228blocks/overlay, oak or similar woodwidth/thickness < 5/1
1000/1250 – –
EN 13228blocks/overlay, beech and similar highly-absorbent wood types < 5/1
1000/1250 – – –
prEN 14761wood flooring - solid wood parquet – vertical finger, wide finger and module brick – 10/16/22 mm
1000/1250 – –
EN 13227wood flooring – solid lam parquet products up to 25 x 5 cm, oak and similar wood types
1000 – –
EN 13227wood flooring – solid lam parquet products up to 25 x 5 cm, beech and similar highly-absorbent wood types
1000 – – –
EN 13629solid hardwood flooring and solid hardwood flooring composite elements
1000 – – – – –
EN 13629wood flooring – solid lam parquet products larger than 25 x 5 cm
1250/1500 – – – – – – –1-layer parquet element, factory pre-finished
EN 13488 small formats, oak and similar wood types 850 –
EN 13488small formats, beech and similar highly-absorbent wood types
850 – – – – –
EN 13226 parquet strip with groove and tongue 1000/1250 – Multilayered parquet element, factorypre-finished
EN 13489 2-layer, parquet strip 1000
EN 13489 2-layer, parquet panel 1000/1250 – – –
EN 13489 3-layer flooring board: < 13 mm thick 1250
EN 134893-layer flooring board: 10–13 mm thick, less than 1200 mm
1250
EN 134893-layer flooring board: 10–13 mm thick, longer than 1200 mm
1250 – – –Multilayered parquet element, unfinished EN 13489 2-layer 1000 Wood block (end grain floors) DIN 68702
Wood block RE & WEup to 40 mm thickness
1000/1500 – – – – – –
DIN 68702Wood block GE> 40 mm thickness (industrial)
1250/1500 – – – – – – – – – –
Subfloor Construction
Binding Material according to EN 13813 Type of subfloor
Floating screed including calcium sulphate screed also with underfloor heating system and self-levelling compounds
CT Cementitious (heated) screed
CA Calcium sulphate (heated) screed – – –
CA Calcium sulphate floating screed – – –
AS Mastic asphalt, well-sanded** – – –
CT/CA Self-levelling compounds
Wooden substrate Chipboard, OSB, plywood
* Whether you use a fine or a course trowel depends on the condition of the subfloor and the dimensions of the parquet elements** For the usage of Bona‘s silane-based adhesives, a protection primer such as R540 or Bona R410 is necessary prior to the installation of the parquet*** Bona R848 can be used under suitable conditions for the installation of soild parquet as mosaic and block parquet with proper dimensions. Please contact your local Bona technical team for more information.
69
Index of Bona Adhesives
Overview of the technical properties of our reactive primers and adhesives
Product name BaseConsumption of primer in g/m²
Consumption as moisture barrier on CT or concrete floors in g/m²
Barrier effect up to max. residual moisture content
Drying time in general/ Drying time in combi-nation with our reactive adhesives
R410* 2-comp. epoxy resin
Approx. 150–250 Approx. 500 (two applications)
Yes, up to max. 5.0 cm/%
24 h with Bona R770/R777/R778 and Bona R844, R845, R848. R850/R850T, R860 and R870T
R540 1-comp. polyurethane
Approx. 150–250 Approx. 300 (two applications)
Yes, up to max. 4.0 cm/%
1 h with Bona R770/R777/R778 4 h with Bona R845 24 h with Bona R844, R848, R850/R850T, R860 and R870T
R580* (1K) Silane-based 500–1000 500–1000 Yes, up to max. 5.0 cm/% or 90% relative air humidity
4 h with all Bona silane-based adhesives
R580 * (2K) Silane-based 500–1000 500–1000 Yes, up to max. 5.0 cm/% or 90% relative air humidity
2 h with all Bona silane-based adhesives
* The broadcasting of quartsand (grit size 0.3–0.8) is possible prior to the usage of a Bona levelling compound.
Special note:• Bona R410 can be diluted with 20% of Bona S100 in order to achieve a deeper penetration of the primer.
• Normally, concrete floors need to be shot-blasted as a mechanical pre-treatment.
• For any further processing information, please view our technical data sheets on www.bona.com
Please note: Our suggestions and recommendations are carefully provided on the basis of our general terms and conditions.
Installation and working parameters are followed by the best of our knowledge, give no entitlement of completeness and do
not disabuse for the final check up of the proposals and products on its applicability at the designated range of use (i.e. by
making sample areas according to DIN 18356.) The observance of notes of the packaging, labels, technical data sheets,
operating, handling and processing instructions as well as marks and appropriate technical guidelines and norms and the
accomplishment of the job through a commercial applier is presupposed according to the adequate instructions.
The Full System for All Your Wood Flooring Needs
You are now holding the most comprehensive guide on our full range of sustainable innovations. Here, you will find detailed product information and application advice for the installation, renovation and maintenance of wooden floors.
All Bona products are optimised for complete compatibility and are specially developed to meet the highest functional, aesthetic and environmental requirements. In this edition, you will find exciting new solutions that take our passion for wood floors one step further. Open up and discover everything you need to bring out the best in wooden floors.
For more information, please contact Bona Far East & Pacific Pte Ltd.15 Jalan Kilang Barat, #01-05 Frontech Centre, Singapore 159357
Tel: +65 6377 1158 Fax: +65 6377 0277 www.bona.com