bomb detection robot using metal detector

7/29/2019 Bomb Detection Robot Using Metal Detector

1/12

BY

E.GEETHA RANI 10PQ1A0406

Y CHAITANYA 10PQ1A0446

T RAKESH 10PQ1A0492

RAM SUSHANTHA 10PQ1A0490REDDY

BOMB DETECTION ROBOT

USING METAL DETECTOR


2/12

INTRODUCTION

The main aim is to produces alarm signalwhen it interfaces with a metal or bomb

This project is mainly useful in militaryapplication and it improves the security

performance


3/12

BLOCK DIAGRAM


4/12

POWER SUPPLY


5/12

FEATURES OF AT89S52CONTROLLER

Compatible with MCS-51 Products

8 Kbytes of In-System Reprogrammable

Flash Memory

Endurance: 1,000 Write/Erase Cycles

Fully Static Operation: 0 Hz to 24 MHzThree-Level Program Memory Lock

256 x 8-Bit Internal RAM

32 Programmable I/O Lines

Three 16-Bit Timer/Counters

Six Interrupt Sources

Programmable Serial Channel

Low Power Idle and Power Down Modes


6/12

HARDWARE FUNCTIONS

Microcontroller:Used to control the operation of the whole

circuit according to specified program.

DC motors:

dc motor used for the direction control

Metal/Bomb Detector:It is able to detect the presence of nearby

objects without any physical contact.


7/12

Buzzer:Used for indication purpose i.e produces alarm

signal.

Power Supply:Used to give 5V power supply to the

microcontroller board and 12v to H-bridge and

motors.

Driver:

L293D IC is used to drive the motors to open

and close the door


8/12

Control of DC motor using L293D IC


9/12

SOFTWARE

Kiel microvision3:Used to write the Embedded C

program.


10/12

APPLICATIONS

The main purpose for designing this robot is that to

implement it in defense sector to detect weapon/

bomb buried in the place where human cannot

fetch for it.

It is very much useful in every public places like

bus-stands, parks, auditoriums etc., this project is

also very much helpful to the police department in

order to prevent bomb explore and prevent anti

social activities in the society.


11/12

SCOPE OF THE PROJECT

To detect the plastic explosives With the use of sensors with very high frequencies

are required to install this robot in the IT

industries, Educational institutions, temples etc.

With the improvement of this robot and uses of

Wireless Technology, it can also be used to detect

and diffuse the bomb.


12/12

bomb detection robot using metal detector

Documents