bn - mad elevator · 2.9x1.6” pushbuttons bn dune mad elevator fixtures 115 city view drive...
TRANSCRIPT
2.9x1.6”
PUSHBUTTONS
BNDUNE
MAD ELEVATOR FIXTURES115 City View DriveEtobicoke, OntarioM9W 5A8, Canada
1-866-957-8500(416) 245-8500
(416) 245-8502 [email protected]
www.madfixtures.com
MAD’s DUNE Series Pushbutton is vandal-proof, cast alloy
with illuminated halo. Can be paired with a standard or
illuminated square braille tags.
Studless MountinguuSatin Nickel or Brass colored non-tarnishing finish
LED Illumination available in Red, Amber, Blue, Green and WhiteuCast or white LED illuminated braille halou
2.9x1.6”
B N
1.6x1.6”
QNo Braille Tag
2.9x1.6”
TCast Braille TagSS Braille Tag
(not Illuminated)White LED
Illuminated SS Braille Tag
11076DUNE
BN DUNE Pushbutton
General: Vandal Proof Studless Frontal Mounting Cast Alloy Pushbutton. Fastened by jam-nut on plates from 11 to 22 Gauge thick Pressel: Cast Zama Alloy with Satin Nickel or Brass colored finishes. Pressel activation is limited by the cast alloy base preventing any stress on the contact block resulting in an extremely robust vandal-proof pushbutton
Contacts: Available with one or two microswitch (2NO/1NC)
Wiring: Screw terminals or JST Pin Connector
Voltage: 24V AC/DC
Illumination: LED-illumination of halo in Red, Amber, Blue, Green and White Stroke: 0.060”
Avg. life: 1,500,000 activations
Degree of protection: IPX3
GENERAL DETAILS
dimensions in inches
.22”
.83” .91”
1.6”1.6”
3.35”*Clearance required behind plate
Retro-illuminated version only
1.4”
2.9”
3.35*
1.25”
1.6”
2.36*
1.1” 1.6” 1.25”
WHITE illuminationWHITE illumination
Cast Braille Tag
Stainless Steel tag w/t White LED Illumination Stainless Steel Tag, non-
illuminated
Braille Tag
.XXMarking00 - none02 - ‘2’AL -
etc. ..
BNX X F 0 0 0
StyleQ - No Braille TagT - Cast Braille TagN - SS Braille Tag (not illuminted)B - White LED Illum. SS Braille Tag
FinishV - Stainless SteelY - PVD Brass
Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White
BS0 00 X X X .01
Voltage4 - 24V AC/DC0 - No Illumination
Contact3 - 1 Contact 4 - 2 Contact
(Microswitch)
(Microswitch)
0 X
WiringM - Screw TerminalsC - JST Connector
Illumination0 - No IlluminationA - AmberB - BlueR - RedG - GreenW - White
BNX X F X X X
Voltage4 - 24V AC/DC0 - No Illumination
Contact3 - 1 Contact 4 - 2 Contact
(Microswitch)
(Microswitch)
X
WiringM - Screw TerminalsC - JST Connector
.XX
StyleQ - No Braille TagT - Cast Braille TagN - SS Braille Tag (not illuminted)B - White LED Illum. SS Braille Tag
FinishV - Satin NickelY - Satin Brass
Complete Assembley Pressel & Bezel Only Contact Only
PHYSICAL CHARACTERISTICS
COMPONENT ORDERING INFORMATION
11076DUNE