bmw e46 navigation retrofit sedan
DESCRIPTION
BMW E46 Navigation Retrofit SedanTRANSCRIPT
Parts and Accessories.Installation Instructions.
DVD Navigation System Retrofit with On-Board MonitorBMW 3 Series Coupé (E 46/2) BMW 3 Series Saloon (E 46/4)
These installation instructions are only valid for cars with SA 534 (automatic air conditioning) and SA 550 (on-board computer).
Retrofit kit No. 65 90 0 391 113
Installation timeThe installation time is approx. 5.5 hours, but this may vary depending on the condition of the car and the equipment in it.
Important information These installation instructions are primarily designed for use within the BMW dealership organisation and by authorised BMW service companies.
In any event the target group for these installation instructions is specialist personnel trained on BMW cars with the appropriate specialist knowledge.
All work must be completed using the latest BMW repair manuals, circuit diagrams, servicing manuals and work instructions in a rational order using the prescribed tools (special tools) and observing current health and safety regulations.
Ensure that the cables/lines are not kinked or damaged as you install them in the car. The costs incurred as a result of this will not be reimbursed by BMW AG.
Additional cables/lines that you install must be secured with cable ties.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
After the installation work the retrofit must be coded using DISPlus or GT-1 via the Retrofit path.
All the figures show LHD cars, proceed accordingly on RHD cars.
Pictograms
denotes instructions that draw your attention to special features.
denotes the end of the instruction or other text.
See the EBA CD or Aftersales Portal for explanations of the pictograms.
Do not archive the hard copy of these installation instructions since daily updates are made by Aftersales Portal.
Subject to technical modifications.
© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004 EN/1
Ordering instructionsIn cars with a BMW Business CD radio up to 09/01 and in all other cars up to 03/01, the aerial booster must be replaced by an aerial booster for cars from 09/01 or 03/01 onwards, respectively. This aerial booster is not included in the retrofit kit and must be ordered separately (see EPC for part number and documentation).
The left boot wheel arch trim must be replaced in cars without a CD changer. This boot wheel arch trim is not included in the retrofit kit and must be ordered separately (see EPC for part number and documentation).
The on-board monitor B and the support E are not included in the retrofit kit since there are different versions. It must be ordered separately (see EPC for part number and documentation).
In cars without aerial Diversity, it must be retrofitted using individual parts (see EPC for part number and documentation).
Special tools requiredNone
EN/2© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
Contents
Section Page
1. Parts list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Preparations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Connection diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. Installation and cabling diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5. To install and connect the retrofit wiring harness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
6. To install and connect the on-board monitor and GPS aerial. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7. To install and connect the navigation computer and radio receiver . . . . . . . . . . . . . . . . . . . . . . . 12
8. Concluding work and coding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
9. Circuit diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EN/3© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
1. Parts list
Legend
A Retrofit cable set
B On-board monitor (not supplied with the retrofit kit)
C Radio receiver
D Navigation computer
E Holder (not supplied with the retrofit kit)
F Front base support system
G Rear base support system
H Radio receiver holder
I Navigation computer holder
J GPS aerial
K GPS aerial cable
A
I
F G
CB
J K
DE
H
NL M
OS
PQ R
046 1766 Z
EN/4© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
1. Parts list
Legend
L Speed nut M5 (13x)
M Hexagonal screw M5 x 14 mm (13x)
N Hexagonal nut M5
O Miniature connector (2x)
P Protective strip
Q Black 3-pin socket casing
R Black 6-pin socket casing
S Cable tie (10x)
A
I
F G
CB
J K
DE
H
NL M
OS
PQ R
046 1766 Z
EN/5© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
2. Preparations
TIS No.
Conduct a brief test ---
Disconnect the negative pole of the battery 12 00 ...
The following components must be removed first of all
Centre fresh air grille 64 22 162
Radio receiver (no longer required) 65 11 030
Air conditioning control 64 11 749
Replace the holder in the oddments box by holder E 51 16 ...
Instrument carrier 62 21 000
Glove compartment 51 16 366
Driver’s seat 52 13 000
Inside door sill strip, left 51 47 000
Door pillar trim bottom left 51 43 150
Rear seat 52 26 005
Rear left side trim 51 43 002
Side backrest section rear left 52 26 008
Roof pillar trim (C pillar), rear left 51 43 251
Trim for rear window shelf 51 46 000
Boot floor trim 51 47 101
Left boot wheel arch trim 51 47 151
EN/6© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
3. Connection diagram
Item Description SignalCable colour / Cross-section
Connection location in the carAbbreviation
/ Slot
A Retrofit cable set --- --- --- ---
A1 Joint connector contact TAA BR/RT0.35 mm2
With miniature connector R to black/white cable of black 26-pin plug X11175 on instrument cluster
X11175PIN 8
A2 Black 17-pin plug casing --- --- On radio plug X18126
A3 Black 6-pin plug casing--- ---
For optional CD changer retrofit and/or hands-free telephone device
X13321
A4 Black 3-pin socket casing --- --- For optional AUX connection retrofit X14118
A5 Blue 12-pin socket casing --- --- On on-board monitor B X18801
A6 White 12-pin socket casing --- --- On on-board monitor B X18802
A7 Joint connector contact Reversing signal
BL/GE0.35 mm2
To joint connector above the fuse holder X428
A8 Cable eyelet Terminal 31 BR
2.5 mm2
On earth post above the left rear wheel arch X13016
A9 Coaxial plug casing --- --- On aerial amplifier on the left C pillar X13344
A10 Fakra socket casing --- --- On radio receiver C X13342
A11 Black 16-pin socket casing --- --- On radio receiver C X18126
A12 Violet 18-pin socket casing --- --- On navigation computer D X1312
A13 Blue 18-pin socket casing --- --- On navigation computer D X1313
K GPS aerial cable --- --- --- ---
K1 Coaxial socket casing --- --- On navigation computer D ---
K2 Coaxial plug casing --- --- On GPS aerial J below rear window shelf ---
A
K
A5
A10
A11
A7
A6
A4
A2 A1
A13
A9
A12A3
K1 K2
A8
0461598 Z
EN/7© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
4. Installation and cabling diagram
Legend
A Retrofit cable set
B On-board monitor
C Radio receiver
D Navigation computer
J GPS aerial
K GPS aerial cable
1 Joint connector X4282 Radio plug X18126
3 Instrument cluster, plug X11175
4 Earth post X130165 Aerial booster
1
2
5
3 A
4
D
B J
CK
046 1684 Z
EN/8© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
5. To install and connect the retrofit wiring harness
Route retrofit wiring harness A from the side skirt (1) as follows along the standard wiring harness:
- Branches A1 – A7 to the centre console
- Branches A8 – A13 into the boot on the left
Route branch A1 along the standard wiring harness to the instrument cluster and use miniature connector R to connect it to the black/white cable of PIN 8 of plug X11175.
Connect branch A2 to radio plug X18126.
Wrap the plug connector in protective strip U.
Only for cars with retrofitted auxiliary connection for external audio sources
Disconnect cables (1) from plug X18805 and connect them to socket casing Q as follows:
- White/blue cable to PIN 1 (AUX R+)
- White/yellow cable to PIN 2 (AUX L+)
- White/brown cable to PIN 3 (AUX -)
Connect branch A4 to socket casing Q.
046 1588 Z
A
A1-A7
A8-A13
1
X11175
R
A1
046 1599 Z
X18126
U
A2
046 1650 Z
X188051
Q
A4
046 1767 Z
EN/9© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
5. To install and connect the retrofit wiring harness
Only for cars with CD changer or hands-free telephone device
Disconnect cables (1) from plug X13321 and connect them to socket casing R as follows:
- Black cable to PIN 1 (Tel NF+)
- Yellow cable to PIN 2 (Tel NF-)
- White/blue cable to PIN 4 (CD NF RE+)
- White/red cable to PIN 5 (CD NF LI+)
- White/brown cable to PIN 6 (CD NF -)
Connect branch A3 to socket casing R.
All cars
Route branch A7 along the standard wiring harness to the glove compartment and connect to joint connector X428.
If joint connector X428 is fully occupied, disconnect the contact and connect branch
A7 using miniature connector O.
Route branches A8 – A13 along the standard wiring harness to the left C pillar.
Route branch A8 to earth post connection X13016 and screw it on.
Route branch A9 to the aerial booster.
Route branches A10 – A13 through the passage grommet (1) into the boot.
In cars with a BMW Business CD radio up to 09/01 and in all other cars up to 03/01, the
aerial booster (1) must be replaced by an aerial booster (1) for cars from 09/01 or 03/01 onwards, respectively.
Unfasten the aerial plug (2) from the aerial amplifier (1) and tie it back.
Screw branch A9 onto the aerial amplifier (1).
X133211
R
A3
046 1768 Z
046 1600 Z
A7
X428
A10 - A13
A8
A9
X13016
1
046 1685 Z
1
A9
2
046 1686 Z
EN/10© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
6. To install and connect the on-board monitor and GPS aerial
Connect branch A5 and branch A6 to on-board monitor B.
Insert on-board monitor B in the instrument panel.
Clip in the centre fresh air grille (1) and use screws (2) to screw it on.
Push GPS aerial J onto the existing lug.
Connect branch K2 to line (1) of GPS aerial J.
Route branch K1 to the left side of the boot.
A5
A6
B
046 1597 Z
046 1586 Z
1
2B
K2
K1
1J
046 1687 Z
EN/11© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
7. To install and connect the navigation computer and radio receiver
Clip speed nuts L into the body.
Use hexagonal screws M to screw on front base support system F and rear base support system G.
Push speed nuts L onto front base support system F and rear base support system G.
Use hexagonal screws M to screw navigation computer holder I onto front base support system F and rear base support system G.
L
046 1689 Z
M
G F
046 1690 Z
GF
LL
046 1764 Z
IF
G
M
046 1763 Z
EN/12© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
7. To install and connect the navigation computer and radio receiver
Route branches A12, A13 and K1 through navigation computer holder I.
Connect branches A12, A13 and K1 to navigation computer D.
Push navigation computer D into navigation computer holder I until it clips in.
Push radio receiver holder H onto radio receiver C and use hexagonal nut N to screw it on.
Connect branch A10 and branch A11 to radio receiver C.
Insert radio receiver C into rear base support system G and use hexagonal screw M to screw it onto front base support system F.
K1
I
A12 A13 046 1692 Z
046 1590 Z
DI
A13
A12
K1
C
N
H046 1765 Z
GPS NAVIGATION SYSTEM
CA11
A10
M
G
F
046 1718 Z
EN/13© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
8. Concluding work and coding
Do not insert the software CD into the navigation computer until prompted to do so during the coding procedure (risk of damaging the navigation computer).
- Connect the battery
- Code the retrofit using DISPlus or GT-1 via path Retrofit
- Conduct a brief test
- Conduct a function test
- Re-assemble the car
EN/14© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
9. Circuit diagram
W60
0S
CH
IRM
OF
FE
N
31
RAD_RV+
RAD_RV-
RAD_LH-
RAD_LH+
2,5 BR
0,75 BL RT0,75 BR OR0,75 BR OR
0,75 GE SW
152
1112
3
122
46
8
0,35 SW
0,35 SCHIRM0,35 SW
0,35 SCHIRM
0,35 SW
0,35 SCHIRM
0,5 BR RT0,75 RT GN
RAD_RH+
RAD_RH-
RAD_LV-
RAD_LV+
0,75 BL SW0,75 BR OR0,75 BR OR
0,75 GE RT
614
81
13
57
CD-NF_RE+
CD-NF_LI+
0,48 SW
0,35 SCHIRM
0,35 WS BL
0,35 WS RT
45 8
9CD-NF_GND
CD-NF_RE+
CD-NF_LI+
CD-NF_GND 0,35 WS BR6 2
ANT
MUTE
I-BUS
30<64
0,50 WS0,35 WS BR0,50 WS GR GE
2,50 RT GN
164
79
1315
109
R
58g
TEL_ON
31
RAD_RV+
RAD_RV-
RAD_LH-
RAD_LH+
RAD_RH+
RAD_RH-
RAD_LV-
RAD_LV+
ANT
MUTE
I-BUS
30<64
R
58g
TEL_ON
1,50 VI WS0,50 GR RT0,35 WS GN
513
10
1614
11
AUX_RE+
AUX_LI+
TEL-NF+
TEL-NF-
AUX_GND
43
10
TA_RE-
TA_RE+
TA_LI- 28
7
0,5 WS GR GE
0,37 RT GN0,5 BR0,5 GE BR
67
29
I-BUS
30
31
TA_RE-
0,5 GE SW10 TA_RE+
TA_LI+
NAV_NF+
NAV_NF-
15
11
31
31
1011
VMR
SCHIRM
VMB
SCHIRM
714
165
VMG
SCHIRM
VMLC31
30
61
1512
I-BUS 3
R
RS 13
TAA 10
0,35 VI WS0,35 BL GE
0,75 RT GN0,5 WS GR GE
0,5 GE RT0,5 GE BR
0,5 BR
0,35 BR
0,35 SW
0,35 SCHIRM
0,35 GE
2,5 BR
0,5 BR
0,35 BR RT
0,5 BL SW
0,5 BL BR0,5 GR RT
0,5 VI WS
43
111
TA_LI-
TA_LI+
58g
R
0,5 SW12 PL
12
34
SE 9
SE 3
SE 30
SE 29
5 SE 9
ANT-NF 11 ANT-NF
2 SCHIRM
67
8
SE 9
VMLC31
30
12 PL
X18
344
VB
I-B
US
W60
1S
CH
IRM
OF
FE
N
X15
43 VB
30
X32
79 VB
31
X13
016
31E
<RA
D
X32
79V
B 3
1
X18
344
VB
I-B
US
X22
9V
B R
X13
62V
B 5
8g
X11
175
LEIT
UN
GO
FF
EN
X42
8R
S
X15
43V
B 3
0
X22
9 VB
R
NAV_NF-
NAV_NF+
189
A42
1A
196
X13
344
X18
801
X18
802
X13
321
X18
126
0,35 BR0,35 GE0,35 SW
32
1
AUX_GND
AUX_LI+
AUX_RE+
X14
118
N9
A11
2
X13
342
X13
321
X13
649
X13
13X
1812
6X
1312
0,35 SCHIRM
0,35 SW1 TEL_NF+
TEL_NF- 0,35 GE2
612
046
1653
Z
EN/15© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004
9. Circuit diagram
Legend
Cable colours
A112 Navigation computer
A196 On-board monitor
A421 Aerial booster
N9 Radio receiver
W600 Screen open
W601 Screen open
X229 Terminal R connector
X428 Joint connector contact, reversing signal
X1312 Violet 18-pin plug, navigation computer
X1313 Blue 18-pin plug, navigation computer
X1362 58g connector
X1543 Terminal 30 connector
X3279 Terminal 31 connector
X11175 Black 26-pin plug, instrument cluster
X13016 Earth, stereo/Hi Fi
X13321 Radio III
X13342 Aerial Radio LF
X13344 Aerial Diversity LF
X13649 Radio IV
X14118 Black 3-pin plug, AUX preparation
X18126 Radio plug
X18344 I bus connector
X18801 Blue 12-pin plug, on-board monitor
X18802 White 12-pin plug, on-board monitor
BL Blue OR Orange
BR Brown RT Red
GE Yellow SW Black
GN Green VI Violet
GR Grey WS White
EN/16© BMW Group, Munich Installation Instructions No. 01 29 0 309 179 Issue date: 01.2004