bmp proteus - technical polyurethane mouldings · proteus is the new generation of technical...
TRANSCRIPT
Technical Polyurethane Mouldings
BMP Proteus Technical Polyurethane Mouldingsfor the Offshore Renewables Industry
Europe
BMP EUROPE LTDShorten Brook Drive
Altham Business Park Altham, Accrington
BB5 5YHUnited Kingdom
t: +44 1282 772000f: +44 1282 777700
CMB FRANCE SARLBP6
20 rue du Garat42152 L’Horme
LyonFrance
t: +33 47 73 12 222f: +33 47 73 18 389
Asia
BMP ASIA INDUSTRIES(Shenzhen) Company Ltd
No 1, Fengmen Industrial Area Fenghuang Road
Egongling, Ping HuLonggang, ShenzhenGuangdong 518111
P.R.China
t: +86 75 58 46 53 140f: +86 75 58 46 53 142e: [email protected]
BMP ASIA INDUSTRIES(Shanghai) Company LtdB 3, No 502 Tianying Road
Shanghai QuingpuIndustrial Zone
QuingpuShanghaiP.R.China
t: +86 21 59 22 70 50f: +86 21 59 22 70 52e: [email protected]
BMP ASIA INDUSTRIES(Singapore) Company Ltd
541 Orchard Road#19-01A, Liat Towers
238881 Singapore
t: +65 68 87 24 22f: +65 67 38 06 28
Americas
BMP AMERICA INC11625 Maple Ridge Road
MedinaNew York 14103
USA
t: +1 585 798 0950f: +1 585 798 4272
BMP MEXICOCalle Circuito Intermex Sur #1511
Parque Industrial Intermex Sur Cd. JuarezChihuahua CP 32575
Mexico
t: +52 656 621 5180f: +52 656 621 5181
www.bmpworldwide.com
Dynamic bend stiffeners are designedto limit bending stresses and excessive
curvature of cables by adding localised stiffness at the point of
contact with a rigid structure.
Dynamic Bend Stiffener
ProShell cable protection is utilisedwhen additional shielding of cables is required, such as at touchdown
points, and over rocky terrain.
ProShell Cable Protection
HydraThane is a unique hydrophilicpolyurethane material which has a
swell ratio of up to 400% when exposed to seawater, yielding unique
sealing properties
HydraThane XP Seals
Bend restrictors comprise of an interlocking vertebrae system,
which prevents the over bending ofcables or umbilicals, due to a specific ‘lock-up’ radius and maximum load
bearing capacity.
Bend Restrictor
Seabed Protection Mats are employedat intersection point s and over rough
terrain, providing protection and stability to the cables
Seabed Protection Mat
Piggyback Clamps are utilised whensmaller secondary cables or pipes require support when attached to
a main carrier pipeline.
Piggyback Clamp
Static Bend Stiffeners are designed tocontrol the minimum bend radius of acable or umbilical, providing overbendprotection during installation and for
applications on the sea bed.
Static Bend Stiffener
J-Tube Seals provide a permanent sealbetween the J-Tube and a newly
installed cable /umbilical, providing an annulus which can be treated
with a corrosion inhibitor.
J-Tube Seal
Vibration dampers are located in the rotor blade tip, and maximise
performance of the blade by limitinglateral stresses.
Vibration Damper
Bend Protectors are designed to addstiffness to cables and umbilicals.
Bend Protector
Balancing Blocks optimise the performance of a wind turbine blade
by preventing excessive vibration generation.
Balancing Block
Titan Main Bearing Seals are manufactured from a hard, abrasion
resistance polyurethane system, and can be moulded in sizes up to
2 metres in diameter.
Titan Main Bearing Seals
Proteus is the new generation of technical polyurethane products from BMPwhich address the demanding requirements of the renewables market sector.Designed to withstand the rigours of offshore and submarine enviroments,BMP’s Proteus range focuses on cable protection systems, including Pro-Shell,bend restrictors, bend stiffeners and J-tube seals, together with specialitymouldings utilised inside wind turbine nacelles and rotor blades.
Technical Polyurethane Mouldings