B l a s t a n d R e c o v e r i n O N E S t e p

“Great - so easy to use.Replaced most of my hand tools!”

• 7/8” Blast Pattern*• Operates on less than 185 cfm

• Use with Wide Range of Abrasives - Including Steel Grit

• Blast and Recover Beyond 200 ft.*• Quick Set-Up

• Compact and Easy to Move

miniBRS

( Blast & Recovery System)

The Schmidt miniBRS uses recyclable abrasives to remove coatings and corrosionwhen cleaning steel or concrete surfaces.

This system is complete - just add abrasive and compressed air!

Applications include indoor blasting, bridge and road maintenance, buildingrestoration and more. The ideal alternative to larger blast and recovery units

when project space or access is limited.

* Based on measurements under controlled conditions at Axxiom facility, using available accessories. Results may vary due tooperator and operating conditions *

© 2011 Axxiom Manufacturing, Inc.Axxiom Manufacturing, Inc. is the manufacturer of Schmidt products. Certain products manufactured by Axxiom are protected by

patents and pending applications in the United States and globally. MV2, ComboValve, Thompson, HALOK, Schmidt, the Schmidt stylized “S” and the Axxiom design are registered trademarks. Trademarks pending or allowed include VPI, Microvalve, VBS,

miniBRS, Ergo-Ladder, G2E, G2P, CEN and the Axxiom logo. All rights reserved.

Rev. 10/11

Creates approximately a 3/4” - 7/8”

(19-22 mm) blast pattern(using a #3 nozzle)

www.AxxiomMfg.com Phone: 800.231.2085 Fax: 888.600.3300

Standard Features: •IntegralMediaScreen •BlastPressureRegulator •75cfmEductor(PneumaticVacuumPump) •AirwashReclaimer •SecondaryCyclonicDustSeparator •DustCollectorw/PolyesterFilterCartridge •DifferentialGageonDustCollector •25’x1/2”BlastHoseAssembly •25’x2”VacuumHose •Blast&RecoverHeadAssembly •TVIIValvewithSlottedSleeve •#3BlastNozzle •ElectricDeadmanBlast Controls Available

miniBRS with Air WashVessel Volume: 0.3 cu. ft.Dimensions: 37”Lx27”Wx60”HWeight: 450 lbs.