blades - o.e.m. replacement banta · mulching blade for deep deck riding mowers, 1998 and after....

BLADES - O.E.M. REPLACEMENT BantaPart# OEM# Length Centre

HoleOuterHole

Centre/Centre

Width Thick

B B

335-018 517-915-M1 17-7/16 5/8 3/16 2-9/64 2 .149

(2) for 34″ cut (While Quantities Last)

345-005 1704100 16-9/64 3/4 13/32 2-9/16 2 .203

(3) for 44” cut, small frame garden tractor 1989 and later.

MAXIM - see ARIENSMTD - also see CUB CADET

335-729 742-0252942-0252

6-7/16 3/8 none none 1-1/2 .090

(1) 335-729 and (2) 335-737 for 44″ cut, side discharge models also found on WHITE & YARDMAN Tractors.

335-798 742-0539942-0539

12-1/2 1-1/2 29/64 2-1/2 3-1/2 .125

Cross blade, (2) 335-798 and (2) 335-790 for 38″ cut, or (2) 335-798 and (2) 335-782 for 42″ cut

335-539 742-0129 / B 942-0129

14-3/4 13/32 5/16 2-1/2 2 .187

(3) for 42″ cut, side discharge. Fits models 498, 499, 762, 957, 962, 982. Use with our 405-308 adapter.

335-449 742-0645942-064

14-13/16 6 pointstar (5/8)

5/16 2-1/2 3 .125

(1) 335-449 and (2) 335-455 for 46″ cut, replaces star centre hole, Centre blade for 600 & 800 series built since 1997

360-607 see above 14-13/16 6 pointstar (5/8)

5/16 2-1/2 3 .164

(1) 360-607 and (2) 360-609 for 46″ cut, Shark tooth mulching blade.

335-533 742-0543942-0543

14-13/16 6 pointstar (11/16)

5/16 2-1/2 3 .125

(1) 335-533 & (2) 335-525 for 46″ cut, replaces star centre hole, Centre blade for 600 & 800 series, 1996 & earlier deep deck.


5/16 2-1/2 3 .164

(1) 360-605 and (2) 360-606 for 46″ cut, Shark Tooth mulching blade. (While Quantities Last)

335-125 742-0486942-0486 / A

14-13/16 13/32 5/16 2-1/2 3 .150

(1) 335-125 and (2) 335-117 for 46″ cut, side discharge.

335-453 742-0612942-0612

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .149

(1) 335-453 and (2) 335-452 for 46″ cut - replaces star centre hole.Centre blade, 3 in 1 mulching blade, 1999 and after, fi ts auto drive step through tractors.

325-884 742-0612942-0612

14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .203

(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade. Fits LT1046 and i1046 series mowers. For star hole replacement blade.

MASSEY FERGUSON - also see SIMPLICITY & SNAPPER

09-01

Banta BLADES - O.E.M. REPLACEMENTPart# OEM# Length Centre

HoleOuterHole

Centre/Centre

Width Thick

B B

335-547 742-0118942-0118

15-5/16 13/32 5/16 2-1/2 2 .134

(2) for 30″ cut, Side discharge models 390, 395, 425, 430, 434, 435, 460, 138-390A, 138-395A, W7-C392-B

335-117 742-0477 742-0480

16-1/4 13/32 5/16 2-1/2 3 .149

742-0487 / 942-0480 / 942-0487A(1) 335-117 and (1) 335-901 for 32″ cut, or (2) 335-117 and (1) 335-125 for 46” cut. Side discharge, Right side.

335-901 742-0477942-0477

16-1/4 13/32 5/16 2-1/2 2 .149

(1) 335-901 and (1) 335-919 for 32″ cut, Side discharge, Left side.

For “MTD” star center hole applications - please see page 09-06335-455 742-0644

942-064416-1/4 6 point

star (5/8)5/16 2-1/2 3 .125

(2) 335-455 & (1) 335-449 for 46″ cut, replaces star centre hole, outside blades for 600 & 800 series built since 1997.


5/16 2-1/2 3 .164

(2) 360-609 and (1) 360-607 for 46″ cut, Shark Tooth Mulching Blade

335-525 742-0542942-0542

16-1/4 6 pointstar (11/16)

5/16 2-1/2 3 .125

(2) 335-525 & (1) 335-533 for 46″ cut, replaces star centre hole, Outside blades for 600 & 800 series, 1996 & earlier, deep deck.


5/16 2-1/2 2-1/2 .187

(2) 360-606 and (1) 360-605 for 46″ cut, Shark Tooth mulching blade. (While Quantities Last)

335-452 742-0611942-0611 / A

16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .150

(2) 335-452 and (1) 335-453 for 46″ cut - star centre hole. Outside blade, 3 in 1 mulching blade, 1999 & after. Fits auto drive step through tractors.

325-885 742-0611942-0611 / A

16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .203

(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades. Fits LT1046 and i1046 series mowers. For star hole replacement blade.

335-653 742-0171B942-0171B

17-1/4 3/8 5/16 2-1/2 2-1/2 .187

(3) for 50″ cut. Fits side discharge models 958, 992 and 993, 1997 and before.

335-554 742-0120942-0120942-0120B

17-1/4 3/8 5/16 2-1/2 2 .150

(2) for 34″ cut, For side discharge models 440, 445, 455, 460, 465, 466, 470, 472, 475, 480, 485, 488, 620, 621, 752, 138-460A, 138-462A, 138-465A and W7-BG-262B.

335-451 742-0623942-0623

17-1/4 6 pointstar (5/8)

5/16 2-1/2 2-1/2 .187

(3) for 50″ cut, star centre hole. Mulching blade for deep deck riding mowers, 1998 and after.

MTD continued - also see CUB CADET

09-02


HoleOuterHole

Centre/Centre

Width Thick

B B

325-510 742-04053742-04053B 742-04053C

17-7/8 6 pointstar (5/8)

none none 2-1/2 .150

942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Standard Duty blade. Fits 50” cut models: LT1050 and RZT50 series

325-507 742-04053A742-04053B 742-04053C

17-7/8 6 pointstar (5/8)


942-04053A / 942-04053B / 942-04053C / 742-04053C0637(3) for 50” cut - Heavy Duty blade. Fits 50” cut model RZT50 series and (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011).


none none 2-1/2” .187

(3) for 50” cut, Shark Tooth Mulching blade.

335-562 742-0121 742-0121B942-0121B

18 3/8 5/16 2-1/2 2 .150

(2) for 36” cut and 18” cut push mowers with side discharge.

For “MTD” star center hole applications - please see page 09-06335-448 742-0738

942-073818 15/16

X11/16

5/16 2-1/2 2-1/4 .134

Fits 18″ walk behinds. Mulching blade for MTD deck 1995 and older. Fits bowtie centre hole

335-446 742-0743942-0743

18 15/16X 11/16

5/16 2-1/2 1-3/4 .125

Fits 18″ walk behinds. Mulching blade for MTD battery operated walk behind mowers. FITS MTD BOW TIE HUB (While Quantities Last)

335-170 742-0496942-0496

18-3/16 13/32 5/16 2-1/2 3 .150

(2) for 36″ cut. High lift blade for deep deck models 1989 and after.

335-475 742-0677 742-0677A / B942-0677A / B

18-1/2 6 pointstar (5/8)

5/16 2-1/2 3 .204

(3) for 54” cut. Fits 2002 and newer models. (Replaces MTD / Troy Bilt #’s 742-0678 / 942-0678 - Note: You need to order 3 blades to make a set). (Found on MTD rider model# 14AA945K004).

360-608 see above 18-1/2″ 6 pointstar (5/8)

5/16 2-1/2″ 3 .203

(3) for 54″ cut, star center hole. Fits 2002 and newer models; Shark Tooth Mulching Blade.

335-570 742-0122942-0122

19 3/8 5/16 2-1/2 2 .150

(2) for 38″ cut. For side discharge models 476, 487, 490, 493, 494, 495, 496, 497,497F, 497P, 498, 628, 698, 720, 760, 765, S/D, 138-495A, 138-497A and W7-BG-497, etc.

360-621 see above 19 3/8 5/16 2-1/2 2-3/4 .149

(2) for 38” cut. Shark Tooth mulching blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2).


09-03


HoleOuterHole

Centre/Centre

Width Thick

B B

335-447 742-0739 942-0739

19 15/16 X11/16

5/16 2-1/2 2-1/4 .125

Fits 19” walk behinds. Fits bowtie centre hole. (Found on MTD push mower model#s 11A-18M9002 and Self Propelled mower model#s 12A-18M7002, 12AE18JA002).

335-610 742-0610942-0610

19-5/16 6 pointstar (5/8)

5/16 2-1/2 3 .149

(2) for 38” cut, with star center hole. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).

335-549 742-0610942-0610

19-5/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

(2) for 38” cut, star center hole, 3 in 1 mulching blade, deep deck - 1992 and after. (Found on MTD rider model# 13AC762F000, 13AC762F065, 13AC76LF031, 13AC76LF055).


5/16 2-1/2 2-3/4 .149

(2) for 38″ cut, Shark Tooth mulching blade, star centre hole.

335-790 742-0537942-0537

19-5/16 13/32 7/16 2-1/2 3 .149

(2) 335-790 and (2) 335-798 for 38″ cut, Mulching blade, side discharge, deep deck - 1992 and after.

360-619 see above 19-5/16 13/32 7/16 2-1/2 2-1/2 .164

(2) for 38″ cut. Shark Tooth mulching blade.

335-885 742-0322 742-0323

19-3/8 13/32 5/16 2-1/2 2 .149

742-0472 / 742-0473A / 942-0472 / 942-0973A

(1) 335-885 and (1) 335-877 for 38″ cut, deep deck. Left hand side blade.

335-877 742-0473A942-0473A

19-3/8 13/32 5/16 2-1/2 3 .149

(2) for 38″ cut, for bagging or (1) 335-877 & (1) 335-885 for 38″ cut, non bagging, deep deck. Right hand side - 86 to 96.

335-493 742-0493942-0493

19-3/8 13/32 5/16 2-1/2 3 .149

(2) for 38″ cut, sand blade, deep deck - 1986 thru 1996.

335-588 742-0123B942-0123B

20 3/8 5/16 2-1/2 2 .150

20″ cut, 118-060A, 118-060-300, 118-070A, 118-070-300, 118-110A, 118-152A, 118-170A, 118-330A, 128-250A self prop. W7-BG20RE-B, W7-BG-062-B, W7-BG170-B, W7-BG-335-B, W7-060-B, W7-C250SP-B self propelled.

335-745 742-0220942-0220

20 3/4 3/8 2-1/2 2 .150

20″ cut used with models with blade brake clutch, 1984 thru 1986. (While Quantities Last)


09-04


HoleOuterHole

Centre/Centre

Width Thick

B B

335-943 742-0520 742-0620

20 13/16 (.822)

3/8 2-1/2 2 .150

942-0520 / 942-062020″ cut walk behind zone start models - 1984 thru 1986.

335-001 742-0620942-0620

20 13/16 (.822)

3/8 2-1/2 2-1/4 .134

20″ cut, mulching blade for walk behind mowers with splined shaft.

335-010 742-0500 942-0500 942-0720

20 13/16 (.822)

3/8 2-1/2 2-1/4 .125

20″ cut, mulching blade for 090 series mowers, 1996 and before.

335-720 742-0500 742-0720

20 13/16 (.822)

3/8 2-1/2 2-1/4 .134

942-0500 / 942-072020″ cut, mulching blade for walk behind mowers w/ splined shaft - 1993 & after, models 070, 080, 090, 100, 200 & 700.

335-439 742-0640942-0640

20 15/16 X11/16

5/16 2-1/2 2-1/4 .125

Fits 20” walk behinds. High lift blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.(Found on MTD push mower model#s 11A-020B000, 11A-020B006, 11A-020B029, 11A-020G020).

335-438 742-0740 942-0740

20 15/16 X11/16

5/16 2-1/2 2-1/4 .125

Fits 20″ walk behinds. Mulching blade for walk behind mowers, 1997 and older. Fits bowtie centre hole.

335-608 742-0608942-0608942-0608C

20-23/64 27/64 21/64 2-1/2 2 .150

(1) 335-608 and (1) 335-607 for 42″ cut decks. Left hand cut blade.

335-607 742-0607942-0607942-0607C

20-23/64 27/64 21/64 2-1/2 2 .150

(1) 335-607 and (1) 335-608 for 42″ cut decks.

335-002 742-0521 742-0621

20-15/16 13/16 (.822)

3/8 2-1/2 2-1/4 .134

942-0521 / 942-0621

Fits 21″ cut, rear bagger models 312R, 313R, 315R, 488, 828 and 848 with splined shaft.

335-814 742-0563942-0563

20-15/16 13/16 (.822)

3/8 2-1/2 2-1/4 .125

742-0721 / 942-0721

21″ cut, mulching blade, walk behind mower, models 312R, 313R, 315R, 488, 828, 848, 100,400,500,800, 1993 & after.

335-596 742-0124 942-0124B

21 3/8 5/16 2-1/2 2 .150

21″ cut, side discharge, fi ts models 118-620A, W7-BG620-B, 128-290A self propelled, W7-BG-290 SP-B self propelled.


09-05


HoleOuterHole

Centre/Centre

Width Thick

B B

335-968 742-0307942-0307A

21 15/32 5/16 2-1/2 2-1/2 .187

21″ cut, used on models with blade clutch brake. (While Quantities Last)

335-935 742-0306A 742-0490 742-0521

21 13/16 (.822)

3/8 2-1/2 2-1/2 .187

742-0621A / 942-0306 / 942-0621A

21″ cut, self propelled, fi ts models 816R, 818R and 462R thru 479R, rear bagger.

335-450 742-0641942-0641

21 15/16 X11/16

5/16 2-1/2 2-1/4 .134

Fits 21″ walk behinds. High lift balde for MTD deck 1997 and newer. Fits bowtie centre hole. (4 point star)

335-741 742-0741 942-0741

21 15/16 X11/16

5/16 2-1/2 2-1/4 .134

Fits 21” walk behinds. Mulching blade for MTD deck 1995 and newer. Fits bowtie centre hole. (4 point star). (Found on MTD push mower model#s 11A-414A020, -414A065, -414E000, -414E029, -41M9001, -436A004, -544A000, -544A020-544A059, -544F004, -54M7001, -54M7031, -A18M055, -A24T055, -A26M011, -B16M029, -B29Q711 and Self Propelled mower model#s 12A-464T020-A26M011, 12AE46JA001, 12AEA29L011, 12AG469D059, 12AI832Q711, 12AI869F011, 12AV566A004, 12AV566A059, 12AV56K3095, 12AVA29Q711, 12AVB26M011).

335-617 742-04308 742-04312

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

742-0656 / 942-0656942-04308 / 942-04312

(2) for 42″ cut, High Lift blade, star center hole

335-616 742-0616942-0616

21-3/16 6 pointstar (5/8)

5/16 2-1/2 3 .149

(2) for 42″ cut, star centre hole

335-551 742-0616 942-0616

21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

742-0616A / 942-0616A

(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after; also fi ts on newer Toro mowers using the 5 point blade hub, model 13AX60RG744. (Found on MTD rider model# 17AC2ACG055, 17AE2ACG004, 17BE2ACG011).


5/16 2-1/2 2-1/2 .187

(2) for 42″ cut. Shark Tooth mulching blade.

MTD Six Star Spindle.We are stocking two types of replacement

blades for the “MTD Six Star Spindles”.Both the “Y” and “H” (double diamond) hole patterns

will fi t securely onto the MTD 6 point star spindles.


09-06


HoleOuterHole

Centre/Centre

Width Thick

B B

335-503 742-0503942-0503

21-3/16 13/32 5/16 2-1/2 3 .164

(2) for 42″ cut, sand blade

335-067 742-0499 742-0499A

21-3/16 13/32 5/16 2-1/2 3 .149

742-0499A / 942-0499 / 942-0499A(2) for 42″ cut, side discharge deep deck models - 1990 and after.

360-622 see above 21-3/16 13/32 5/16 2-1/2 3 .164

(2) for 42″ cut, Shark Tooth mulching blade.

335-782 742-0538942-0538

21-3/16 13/32 7/16 2-1/2 3 .149

(2) 335-782 and (2) 335-798 for 42″ cut, high lift for bagging - 1992 and after. (Cross blades on page 09 - 01)

335-604 742-0125 942-0125

22 3/8 5/16 2-1/2 2 .150

22″ cut, side discharge, fi ts models 110-162A, 118-120A, 128-260A self propelled. W7-C262SP-B self propelled etc.

MTD Six Star Spindle. > We are stocking two types of replacement blades for the “MTD Six Star Spindles”.Both our “Y” and “H” hole patterns, will fi t securely onto the MTD Six Star spindles.

335-737 742-0295942-0295

22 13/32 5/16 2-1/2 2 .187

(2) 335-737 and (1) 335-729 for 44″ cut - side discharge - 700, 800 series, found on WHITE & YARDMAN tractors.

335-642 742-0642 742-0642A 942-0642

22 15/16 X11/16

5/16 2-1/2 2-1/4 .134

942-0642A22" cut walk behinds mowers after 1995. Fits bowtie centre hole. (Found on MTD push mower model#s 11A-074E065, 11A-084E000, 11A-084E029).

335-742 742-0742 942-0742

22 15/16 X11/16

5/16 2-1/2 2-1/4 .134

22” cut walk behinds. Mulching blade for walk behind mowers. Fits bowtie centre hole. (Found on MTD push mower model#s 11A-084D000, 11A-084E020, 11A-08JC006, 11A-08JC03111A-504E000, 11A-504E020, 11A-50JC00 and Self Propelled mower model#s 12A-264A000, 12A-26JC006, 12A-26JC031).

335-497 742-0222942-0222

22 3/4 3/8 2-1/2 2 .150

22″ cut, used on models with blade brake clutch, 1984 thru 1986.

335-950 742-0522742-0622

22 13/16 (.822)

3/8 2-1/2 2 .150

942-0522 / 942-062222″ cut, self propelled mowers with splined shaft.

335-722 742-0722 942-0722

22 13/16 (.822)

3/8 2-1/2 2-1/4 .125

22″ cut, mulching blade for mowers with splined shaft, models 050, 060, 070, 080, 200, 500 - 1993 and after.


09-07


HoleOuterHole

Centre/Centre

Width Thick

B B

335-470 742-04244 742-04290

23-3/8 6 point star (5/8)

none none 3 .150

942-04244 / 942-04290(2) for 46” cut deck on Cub Cadet / MTD series 100, LTX lawn tractors with 46” cut decks, 2009 and after. Models: LTX1045, LTX1046, LTX1046VT and LTX1146. (Found on MTD rider model#s 13AL771T004, 13AL795T004, 13AX791T031, 13AX79KT011, 13AX90YT001, 13AX915T004).

335-687 742-0132942-0132

24-7/8 3/8 5/16 2-1/2 2-1/2 .187

(2) For 46″ cut, fi ts models 360, 362, 380, 385, 404, 420, 770 and 775 etc. (While Quantities Last)

335-134 742-0156 742-0157

26 13/32 5/16 2-1/2 3 .149

742-0158 / 742-0194 / 742-0255 / 942-0194 / 942-0255A

Fits 26″ cut models 525, 526 and 527 etc. (While Quantities Last)

335-646 742-0256742-0193

30 3/8 5/16 2-1/2 3 .150

742-0280 / 942-0256A / 942-0193

30″ cut, side discharge models 410, 412, 790, 795, 796, 796, 797, 138-796A, 138-797A and W7-BG796-B - 1990 & after.

335-454 742-0609942-0609942-04058

30 6 point star

21/64 2-1/2 2-3/4 .160

30” cut. Fits MTD side discharge deck, riding mowers 1990 and after. Replaces 6 point star centre hole blade.

MTD Four Star Spindle. > We are stocking blades that have beendesigned to securely fi t onto the MTD Four Star (bow tie) Spindle.

We stock the following replacement blades for >MTD# 942-0738, 942-0743, 942-0740, 942-0640, 742-0741,

942-0741, 942-0641, 742-0742, 972-0742, 742-0642 and 942-0642.

MURRAY335-851 024458

025119 15-1/32 7/8 X 1 none none 2-1/4 .125

23209 / 24338 / 24338E701 / 24458E701 / 424458

(3) for 42″ cut, High Lift blade, 1977 thru 1989. (Uses our 405-217 or 400-217 blade adapters) (While Quantities Last)

335-786 024338 024458

15-1/32 7/8 X 1 none none 2-1/4 .150

025119 / 23209HT / 24338E701 24458E701 / 24458HT / 4244588 / 424458S

(3) for 42″ cut, embossed stiffeners, 1976 thru 1980 - 42″ cut, 1984 thru 1990 - 42″ cut. (Uses 405-217 or 400-217 blade adapters)

335-794 20928E70120928

15-1/4 7/8 X 1 none none 2-1/4 .149

(2) for 30″ cut (Uses our 405-217 or 400-217 blade adapters)


09-08


HoleOuterHole

Centre/Centre

Width Thick

B B

335-040 56631E701656631

15-3/4 27/32 (.850)


(3) for 46″ cut, Mulching blade - for GT rail frame models, also used on Scotts mower, 3 in 1 blade.

335-038 92117 92117E701 92117E701MA

15-3/4 27/32 (.850)


(3) for 46″ cut, High lift blade - newer models 46901X92A, 1991 thru 1998 all decks.

335-012 92117 92117E701

15-3/4 27/32 (.850)


(3) for 46″ cut, Heavy duty / High lift blade - 1991 thru 1998 all decks

360-700 see above 15-3/4 27/32 (.850)



335-802 20929E701 16-3/8 7/8 X 1 none none 2-1/4 .150

(2) for 32″ cut (While Quantities Last)

335-092 9469294692E70194692-853

17-11/16 27/32 (.850)


(3) for 48″ & 50″ cut LT railframe; 52″ rail frame; 52″ GT old style. Fits models 48560X9Z, 50563X8, 52370X92

335-752 20059E70120059

17-7/8 3/8 11/32X

1/2 slots

2-3/8 2-1/4 .149

Fits older style 18″ walk behinds. (While Quantities Last)

335-115 020930 02400

18-1/4 7/8 X 1 none none 2-1/4 .149

024116 / 025116 / 054372 / 429305 / 54390E701 / 54390HT

(2) for 36″ cut, High Lift blade, Takes (2) 335-115 and (2) 335-141 (cross blades) for 36″ cut

335-141 54421HT5438954373

18-1/4 7/8 X 1 none none 3 .150

(2) 335-141 and (2) 335-115 for 36″ cut, Cross blades, high lift for bagging

335-810 20930 20930E701

18-1/4 7/8 X 1 none none 2-1/4 .149

420930 / 454390 / 54390E701

(2) for 36″ cut, Rider models 1987 thru 1989 and Lawn Tractor models 1976 thru 1988

360-715 see above 18-1/4 7/8 X 1 none none 2-1/4 .187

(2) for 36″ cut, Shark Tooth mulching blade. (While Quantities Last)

335-121 43865 71548 71548E701

19-3/8 13/32 none none 2-1/4 .134

20″ Mulching blade for models from 1990 thru 1996

MURRAY continued

09-09


HoleOuterHole

Centre/Centre

Width Thick

B B

335-008 92003HT92003E701

19-1/2 27/32(.850)


(2) for 38″ cut, Sand blade - low lift

335-182 91742HT91742E701

19-1/2 27/32(.850)


(2) for 38″ cut, High lift blade. Fits models from 1989 thru 1996, standard duty blade

335-118 91742E70191742HT

19-1/2 27/32(.850)


(2) for 38″ cut, High lift blade, Fits models from 1989 thru 1996, Heavy duty blade

335-021 49510495104E701

19-1/2 27/32(.850)


92543E701 / 09510E701

(2) for 38″ cut, Mulching blade, (3 in 1 blade)

360-702 see above 19-1/2 27/32(.850)


(2) for 38″ cut, Shark Tooth mulching blade. (While Quantities Last)

335-003 5625056250E701

19-1/2 27/32(.850)


(2) for 38″ cut, Mulching blade, 1989 thru 1998 - 3 in 1 blade.

360-712 see above 19-1/2 27/32(.850)


(2) for 38” cut, Shark Tooth mulching blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2)

335-760 20045 20045E701

19-15/16 13/32 13/32 2-1/2 2-1/4 .150

20045HT / 42785E701 / 42785HT

20″ cut

335-022 672763672763E701671921E701

20 3/8 none none 2-1/4 .150

Fits 20” cut walk-behind mowers. Mulching blade, 3 in 1 blade.

335-024 095103E701 56251E701 92544E701

20-5/16 27/32(.850)


95103853 / 95103E701 (2) for 40″ cut, Mulching blade, 3 in 1 blade

360-719 see above 20-5/16 27/32(.850)


(2) for 40″ cut, Shark Tooth Mulching Blade

MURRAY continued

09-10


HoleOuterHole

Centre/Centre

Width Thick

B B

335-030 9200292002E70192002HT

20-3/8 27/32(.850)


(2) for 40″ cut, Sand blade - low lift blade

335-104 456251 56251 56251E701

20-3/8 27/32(.850)


(2) for 40″ cut, Mulching blade, 1989 thru 1998, 3 in 1 blade.

335-166 91871 91871E701 91871HT

20-3/8 27/32(.850)


(2) for 40″ cut, High lift blade for bagging. Models 40603, 40604, 40606, 40620, 40622, 1989 thru 1998.

335-016 91871 91871853

20-3/8 27/32(.850)


91871E701 / 91871HT(2) for 40″ cut, High lift blade for bagging. Heavy duty blade.

360-704 see above 20-3/8 27/32(.850)



335-028 672029 672057E701

20-3/4 13/32 none none 2-1/4 .134

71584853 / 71584E701

21″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.

335-007 4383643836E701

20-13/16 13/32 none none 2-1/4 .134

43836HT / 43610HT / 043610E701

21″ cut, walk behind models 21681X5 and 21681X62, 1990 and newer.

335-806 71161E701471161471584

20-7/8 13/32 none none 2-3/4 .150

21″ cut, Mulching blade.

335-869 042739 22860

20-7/8 13/32 13/32 2-1/2 2-1/4 .150

22860E701 / 422860 / 22860HT21″ cut, blade for bagging, 1983 thru 1989.

335-019 095100E701 095100E701A 495100

21-3/16 27/32(.850)


7769203 / 95100E701A(2) for 42″ cut, Mulching blade, 3 in 1 blade, also used on Scotts mowers

MURRAY continued

09-11


HoleOuterHole

Centre/Centre

Width Thick

B B

335-020 092419E701 095101E701 92419E701

21-1/4 27/32(.850)


95101E701 / 095101E701MA (2) for 42″ cut.

335-162 092418E701 492418MA 92418

21-1/4 27/32(.850)


92418E701(2) for 42″ cut, High lift blade.

335-167 492418 492418MA 492418MA

21-1/4 27/32(.850)


092418E701 / 092418E701 / 095101E701MA 09510E701 / 92418 / 92418E701 / 95101E701

(2) for 42” cut, High lift blade. Heavy duty.

335-005 456252 456252MA 56252

21-1/4 27/32(.850)


56252E701 / 656252853 / 056252E701 / 056252E701MA (2) for 42″ cut, Mulching blade, 1992 thru 1996, 3 in 1 blade.

360-701 see above 21-1/4 27/32(.850)



360-720 672573E701672573

21-5/8 13/32 none none 2-1/4 .187

For 22″ walk behinds, Shark Tooth mulching blade (While Quantities Last)

335-068 1101823 1101823E701

21-5/8 13/32 13/32 1-7/8 2 .135

7100851 / 1101823E701MA / MU1101823E701MAFits Murray push mowers. 3 in 1 blade.

335-111 20046 20046E701

21-7/8 13/32 13/32 2-1/2 2-1/4 .150

42225 / 42225E70122″ cut, High lift blade

335-471 672059E7011101120E701

21-7/8 13/32 none none 2-1/4 .134

22″ cut, walk behind mowers.

335-499 1101120E701 672059E701

22 13/32 none none 2-1/4 .149

672735 / 672735E701 / 7111371113E701 / 71499 / 71499E701 / 71584E701 / 71849E701

22″ cut, Mulching blade for walk behind mowers, 3 in 1 blade.

BANTA’S “Blade by Length Chart” follows this“BLADE - O.E.M. REPLACEMENT” section

MURRAY continued

09-12


HoleOuterHole

Centre/Centre

Width Thick

B B

335-828 20083E701 24-11/16 7/8 X 1 none none 2-1/4 .149

25″ cut, side discharge models from 1983 thru 1988, low lift blade with stiffening arch. (While Quantities Last)

335-976 5545755457HT55457E701

24-11/16 27/32(.850)


25″ cut, low lift blade with stiffening arch.

335-135 002405 55793HT

30 27/32(.850)


55454HT / 55793E70130″ cut, Low lift blade.

335-330 55969E701 56212

30 27/32(.850)


56212E701 / 56246E701/ 56060HT30″ cut, High lift blade for bagging

335-215 5621056217056217E701

30 27/32(.850)


30″ cut, Mulching blade. Fits rear engine riders models 2466A and 24661A. 1987 to present, 3 in 1 blade.

360-707 see above 30 27/32(.850)


30″ cut, Shark Tooth mulching blade.

335-116 54053E70154053HT

30 7/8 X 1 none none 2-1/4 .150

24868 / 25625 / 24868E701 / 5405430″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter)

335-004 56061E70156061HT

30 7/8 X 1 none none 2-3/4 .160

054171 / 055970 / 056061 / 45606130″ cut, High lift blade for bagging. (Uses our 405-217 or 400-217 blade adapter)

NEW HOLLAND - see FORD & HOMELITE / JACOBSENNOMA - AMF / Canadiana / Dynamark

305-680 9248300323

9-5/8 3/8 none none 2 .134

782972 / 00782972(1) 305-680 and (2) 305-649 for 45″ cut, high lift.

305-573 78297456370

14-1/2 3/8 none none 2 .134

8581 / 54882 / 49312 / 00782974(3) for 42” cut. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 3). (While Quantities Last)

305-013 309571317071327557

16-1/16 3/8 none none 2 .134

(3) for 46″ cut, High lift blade, also fi ts Husqvarna model 4140H

MURRAY continued

09-13


HoleOuterHole

Centre/Centre

Width Thick

B B

305-516 868456820

16-1/8 3/8 none none 2 .150

54883 / 42433 / 58620 / 25631 / 782971 / 327503 / 00782971(2) for 32″ cut, low lift blade for rear engine riders, also fi ts Sears.

305-623 317071 309573302329

16-1/8 3/8 none none 2 .134

(2) for 32” cut. Super High Lift blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2). (While Quantities Last)

305-524 868556821

18-1/8 3/8 none none 2 .140

54884 / 39311 / 782965 / 00782965(2) for 36″ cut, low lift blade.

305-649 58212306931

18-1/8 3/8 none none 2 .134

(2) for 36″ cut, High Lift blade or (2) 305-649 and (1) 305-680 for 45″ cut.

305-599 57299309069

19-11/16 3/8 none none 2 .134

76860 / 031039(2) for 39″ cut, Low lift blade, found on Lawn Chief tractors.

305-631 58190306932

19-11/16 3/8 none none 2 .134

(2) for 39″ cut, Super High Lift blade, found on Lawn Chief tractors.

305-633 33042532616076660

19-11/16 3/8 none none 2 .134

(2) for 39” cut. Mulching blade, 3 in 1 blade. (NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN MULTIPLES OF 2).

305-532 41198310764

20 3/8 5/16 2-1/8 2 .150

20″ cut, side discharge.

305-277 330277 20-1/4 3/8 none none 2 .187

20″ cut, Mulching blade for K-Mart models. (While Quantities Last)

305-708 309070303065

20-5/16 3/8 none none 2 .134

(2) for 40” cut, Super High Lift blade. Fits models A4016-030. NOTE: Will replace Noma / Canadian / Dymamark blade number 313316 - if the mower deck is equipped with the newer style quill / spindle assemblies that have the cut outs in the saddle to allow for our 305-708 blade.

305-607 30906857208

20-11/16 3/8 3/8X

15/16

2-11/16 2 .134

21″ cut, walk behind side discharge mowers (While Quantities Last)

305-060 31076157209

21-9/16 3/8 3/8X

15/16

2-11/16 2 .134

22” cut, side discharge walk behind mowers, models 223586 and 223587.

NOMA - AMF / Canadiana / Dynamark continued

09-14


HoleOuterHole

Centre/Centre

Width Thick

B B

305-023 330278325762

21-5/8 3/8 none none 2 .187

(2) for 43″ cut, Mulching blade, 3 in 1 blade.

305-700 31660831395413954

21-3/4 3/8 none none 2 .134

(2) for 42″ and 43″ cut, High Lift blade.

305-468 325751 29-7/8 1/2 28/64X

15/16

2-11/16 2-3/4 .187

30″ cut

POULAN PRO / JONSEREDS - see HUSQVARNA & AYPPOWER KING - see ECONOMY / POWER KINGPRO STAR - see DIXIE CHOPPERRANSOMES - see BOBCAT / RANSOMESROPER - see AYP - Roper / SearsSARLO

355-503 15111511-21

20-5/8 5/8 none none 2-1/4 .187

355-508 1517 22 3/8 none none 2-1/2 .187

355-511 15131513-24

23-1/2 5/8 none none 2-1/2 .187

SCAG340-109 48110

481706A48110

16-1/2 5/8 none none 2-1/2 .203

(2) for 32″ cut or (3) for 48″ cut

340-113 48184481710A48184

16-1/2 5/8 none none 3 .204

(2) for 32″ cut or (3) for 48″ cut, High lift blade.

360-917 see above 16-1/2 5/8 none none 2-1/2 .204

(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.

NOMA - AMF / Canadiana / Dynamark continued

09-15


HoleOuterHole

Centre/Centre

Width Thick

B B

340-158 48108481707A48108

18 5/8 none none 2-1/2 .203

(2) for 36″ cut or (3) for 52″ cut.

340-633 482462 18 5/8 none none 2-1/2 .203

(2) for 36″ cut High lift blade, (after 2000)

340-121 481711 48185

18 5/8 none none 3 .203

482467 / A48185(2) for 36″ cut or (3) for 52″ cut, High lift blade.

360-918 see above 18 5/8 none none 2-1/2 .204

(2) for 36” cut or (3) for 52” cut, High Lift blade. Shark Tooth Mulching blade.

360-029 482235 482724

18 5/8 none none 2-1/2 .204

482961 / 483317(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching Blade.

340-174 48109A48109482129

20 5/8 none none 2-1/2 .204

(2) for 40” cut and (3) for 60” cut.

310-078 48111A48111481708

21 5/8 1/4 1-5/8 2-1/2 .250

(3) for 61″ cut, Heavy Duty Blade.

340-628 48304A48304481712

21 5/8 none none 3 .204

(3) for 61″ cut, High lift blade



360-920 see above 21 5/8 none none 3 .250

(3) for 61” cut. Heavy duty, Shark Tooth Mulching Blade.

340-129 4811248113481709

24-1/2 5/8 none none 2-1/2 .203

(3) for 72″ cut


(3) for 72″ cut, Shark Tooth mulching blade (While Quantities Last)

SCAG continued

09-16


HoleOuterHole

Centre/Centre

Width Thick

B B

335-040 56631E701 15-3/4 27/32 (.850)


(3) for 46″ cut GT rail frame, Mulching blade - models made by Murray

360-700 see above65663192117E701

15-3/4 27/32(.850)



330-448 M127466 16 11/16 none none 2-1/2 .203

(3) for 46″ cut, lawn tractors S2046 and 2546 (1999 thru 2001) models - made by John Deere


(3) for 46″ cut, Shark Tooth mulching blade

330-447 M135589 16-5/8 3/4 none none 2-1/2 .203

(3) for 48″ cut, yard tractors, High lift blade for bagging, models made by John Deere.

335-092 9469294692E701094692E701

17-11/16 27/32(.850)


(3) for 48″ and 50″ cut LT railframe; 52″ rail frame; 52″ GT old style. Fits models 48560X9Z, 50563X8, 52370X92.

330-365 M115496 18-5/8 13/16 none none 2-1/2 .204

(3) for 54″ cut, new style, models made by John Deere.



335-028 672029672057E701

20-3/4 13/32 none none 2-1/4 .134

71584853 / 71584E70121″ cut, Mulching blade for walk behind mowers, 3 in 1 mower - made by Murray.

335-019 095100E701 095100E701A

21-3/16 27/32(.850)


495100 / 7769203(2) for 42″ cut, Mulching blade, 3 in 1 blade, models made by Murray.

360-701 see above 21-1/4 27/32(.850)



330-449 M127129 M139802M145969

21-15/32 11/16 none none 2-1/2 .160

(2) for 42″ cut, Mulching blade, yard tractor models - made by John Deere.



SCOTTS (Home Depot brand name) also see John Deere & Murray

09-17


HoleOuterHole

Centre/Centre

Width Thick

B B

360-720 672573672573E701

21-5/8 13/32 none none 2-1/4 .187

22″ cut, Mulching blade for walk behind mowers, 3 in 1 mower - made by Murray (While Quantities Last)

SEARS / CRAFTSMAN - see AYP and MURRAYSENSATION - also see GILSON and LAWN BOY

340-786 123101229904Gilson# 230904

20-3/8 3/8 3/8 2 2-1/2 .187

20″ cut.

SIMPLICITY - also see ALLIS CHALMERS345-009 108297

202589211-9/16 1-3/8 3/8 3-1/16 2-1/2 .150

(3) for 32″ cut, Left hand cut blade. (Allis Chalmers# 2025892)

345-017 1085012087731

13 1-3/8 3/8 3-1/16 2-1/2 .150

(3) for 36″ cut, Left hand cut blade. For Broadmoor 36, (Allis Chalmers# 2087731)

345-090 16561442025856

14-1/2 3/4 13/32 3-1/16 2 .150

(3) for 42″ cut, Left hand cut blade, 7000 and 7100 series and diesel models, pre 1997.

345-074 1656147 15-5/16 3/4 13/32 2-9/16 2 .150

(3) for 42″ cut, Fits models 51116, 5216, 6000, 6200 and 6500 also Sunrunner FC and GT series.

345-106 1704856 16-1/8 3/4 13/32 2-9/16 2 .203

(3) 345-106 for 44” cut or (1) 345-106 and (1) 345-102 for 38” cut. Found on both LTH and 1600 series.

345-005 1704100 1704100AS1704100SM

16-9/64 3/4 13/32 2-9/16 2 .203

1716696A / 1727774A / 1727774BMA / 1727774SM(3) for 44″ cut, small frame garden tractor 1989 and later.

345-082 1656143 1656143SM

16-11/16 3/4 13/32 3-1/16 2 .150

(3) for 48” cut, Left hand cut blade, New style mowing decks. Fits GTH-L, 700, 900, 7000 series.

345-003 1679916 16-3/4 1 none none 2-1/2 .203

(3) for 48″ cut, Left hand cut, fi ts large frame garden tractors, 1987 and later.

SCOTTS cont. (Home Depot brand name) also see John Deere & Murray

09-18


HoleOuterHole

Centre/Centre

Width Thick

B B

345-124 1656146 17 3/4 3/8 2-9/16 2 .187

(3) for 48″ cut, 5200, 6100, 6200 and 6500, FC and GT series.

345-006 1708229 1708229AS

18-1/8 3/4 3/8 2-9/16 2 .203

1726357 / 1726453A / 1726453BZ(3) for 50” cut. For large frame tractors. Fits models 14 - 16 GT and 1700 series.

345-117 16715651674565

18-7/16 3/4 13/32 2-9/16 2-3/4 .187

For 36″ cut, Right hand side. (Use with deluxe grass catcher). (1) 345-117 and (1) 345-116 for 36″ cut. High lift blade for bagging. Fits Dixon ZTR model 361 with bagger. For Simplicity models; (2) for 36″ cut

345-108 16575891636451

18-1/2 3/4 13/32 2-9/16 2 .187

(2) for 36″ cut. For ZTR model 361 only. For Simplicity models use (1) 345-108 and (1) 345-116 for 36″ cut bagger. Fits models 4000, 5116 and 5216 - 36″ Sun Runner LT and RT series.

345-116 16851721671593

18-1/2 3/4 13/32 2-9/16 2-1/2 .187

For 36″ cut, Left hand side. High Lift Blade, (Use with deluxe grass catcher) (1) 345-116 and (1) 345-117 for 36″ cut. Fits Dixon ZTR model 361 with bagger. For Simplicity use either (2) 345-116 for 36″ cut or (1) 345-116 and (1) 345-108 for 36″ cut for bagger models.

345-102 1704101 1704101A

22-1/4 3/4 13/32 2-9/16 2 .203

1704101AS / 1716695A

(1) 345-102 and (1) 345-106 for 38″ cut, For LTH and 1600 series.

SNAPPER - also see MASSEY FERGUSON335-044 1737228A

1737228BZ 1737228MA

16-3/32 .805 none none 2-1/2 .204

(3) for 46” cut. Fits Snapper 46” Zero Turn mowers; also found on Simplicity, Massey Ferguson.

355-183 1-7036 5020843

16-1/4 5/8 1/4 1-5/8 2-1/2 .250

5020843A / 7017036 / 7077378 / 76675 / 77378

(2) for 32″ cut or (3) for 48″ cut, High lift blade, Heavy duty blade.

360-916 1-7036 7017036

16-1/4 5/8 none none 2-1/2 .204

7076675 / 7077378 / 76675

(2) for 32″ cut or (3) for 48″ cut, Shark Tooth mulching blade.

335-120 1-97337019733

16-1/2 3/8 none none 2-3/4 .160

(3) for 48″ cut, For LT48 steel decks

SIMPLICITY continued - also see ALLIS CHALMERS

09-19


HoleOuterHole

Centre/Centre

Width Thick

B B

335-126 1-70437017043

16-1/2 5/8 none none 2-1/2 .203

(3) for 48″ cut, Fits commercial models PMA-480, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.


(2) for 32” cut or (3) for 48” cut, Shark Tooth mulching blade.

335-136 7-93697079369

16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, Low lift blade, for ZTR mowers.

335-123 7-93887079388

16-15/16 1/2 none none 2-1/2 .203

(3) for 48″ cut, High lift blade, for ZTR mowers


(3) for 48” cut, Shark Tooth Mulching Blade.

355-016 1-7037 363055

18 5/8 none none 2-1/2 .150

7075751 / 7075751BZ / 76450(2) for 36″ cut or (3) for 52″ cut, Series 2 decks, Pro Series 0 and Pro 7 Series 0, 1, 2 and 4.

310-052 1-7037 7017037

18 5/8 1/4 1-5/8 2-1/2 .250

7077344 / 77344(2) for 36″ cut or (3) for 52″ cut, Heavy duty blade, Series 2 decks, Pro Series 0 & Pro 7 Series 0, 1, 2 & 4.


(2) for 36” cut or (3) for 52” cut, High Lift blade. Shark Tooth Mulching blade.

335-257 1-8075 1-8167

18 7/8 none none 2-3/4 .187

7018075 / 7018167For V-Series walk behinds with cast aluminum decks. (While Quantities Last)

335-045 1737252A 1737252BM

18-1/2 .805 none none 2-1/2 .204

1737252BZ / 1737252MA

(3) for 52” cut. Fits Snapper 52” Zero Turn mowers; also found on Simplicity, Massey Ferguson.

335-349 1-9644 1-9711

18-3/4 3/8 none none 2-1/2 .149

7019644 / 701971119″ cut, steel deck walk behind. (While Quantities Last)

335-197 2-4466 4-2998

19-7/16 1 none none 2-1/4 .203

7024466 / 7042998

(2) for 38″ cut, front engine rider models LT1438H and Black Hawk model BH120G38A.

SNAPPER continued - also see MASSEY FERGUSON

09-20


HoleOuterHole

Centre/Centre

Width Thick

B B

335-356 1-7002 1-9645

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

1-9702 / 1-9710 / 2-6691 / 7017002 / 7019645 7019702 / 7019795 / 7019795BZ / 7026691

21″ cut, steel deck walk behind series 9.

335-240 1-9795 7019795 7019795BZ

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

21″ cut walk behind, (2) for 41″ tractor, Std. & BBC, punched for high lift defl ectors 335-232.

335-042 1-70021-7168

20-11/16 3/8 3/8 2-3/4 2-3/4 .160

1-9645 / 1-9702 / 1-9710 / 2-6691 7017168 / 7026691 / 7026691BZ / 7041939

21″ cut, Mulching blade - Recycler

320-547 7079222 79222 79371

21 1/2 none none 2-1/2 .250

(3) for 61” cut, Heavy duty blade. Standard lift blade. For ZTR mowers.

320-548 7079222 79222

21 1/2 none none 2-1/2 .240

(3) for 61” cut, Heavy duty blade. High lift blade. For ZTR mowers. (For Shark Tooth version see our 360-915 under the WOODS heading).

335-217 2-6428 7026428 7026428BZ

21 13/16 3/8 2-1/2 2-1/4 .134

21” cut, Mulching blade for walk behinds. For Platinum series mowers.

335-323 1-81937018193

21 7/8 none none 2-3/4 .187

21” cut, High Lift blade. For V-series cast aluminum decks.

335-200 17318981731898MA

21-3/16 .975 none none 2-1/4 .170

(2) for 42″ cut. Fits Snapper LT-200 series and Zero Turn 150Z series.

335-398 1-95187019518

25 1-1/16 9/16 7-1/2 2-3/4 .187

25″ cut, rear engine riders, blade punched for use with our 335-422 air lifts.

335-299 1-80687018068

26 1-1/16 9/16 7-1/2 2-3/4 .187

26″ cut, rear engine rider - new style, blade punched for use with our 335-414 air lifts.

335-315 1-95157019515

28 1-1/16 9/16 7-1/2 2-3/4 .187

28″ cut, rear engine riders - new style, blade punched for use with our 335-414 air lifts.


09-21


HoleOuterHole

Centre/Centre

Width Thick

B B

335-289 1-698070169807016980BZ

28 1-1/16 9/16 7-1/2 2-3/4 .160

28″ cut, Mulching blade - Recycler, for rear engine riders.

335-281 1-803860332

30 7/8 none none 2-3/4 .187

7060332 / 701803830″ cut, rear engine riders - older style, blade punched for use with our 335-414 air lifts.

335-307 1-806970180697018069BZ

30 1-1/16 9/16 7-1/2 2-3/4 .187


360-930 see above 30 1-1/16 9/16 7-1/2 2-3/4 .187

30″ cut, Shark Tooth mulching blade for rear engine riders - new style.

335-331 1-952370195237019523BZ

33 1-1/16 9/16 7-1/2 2-3/4 .187


335-293 1-698270169827024741BZ

33 1-1/16 9/16 7-1/2 2-3/4 .160

33″ cut, Mulching blade - Recycler, for rear engine riders.

335-406 2-7751 / 3-1184 / 3-7751 / 6-0332 / 7037751 / 7037751A 7037751BM

Blade holder - older mowers with single hole blades can be adapted to above blades by installing a blade holder bar. For 25”, 26”, 28”, 30” and 33” riding mowers. Length: 12-1/2”

335-422 3-77236-04807060480

4 5/16 5/16 1-1/4 4 .120

Air lift set contains: (2) 3 hole defl ectors, (6) star lock washers, (6) 5/16″-24 X 21/32″ grade #5 - oval head screws and (6) hex nutd (Fits 28″ and 33″ blades)

335-414 3-17247031724

5-1/4 none 5/16 2-1/2 1-1/2 .120

Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (Fits 26″ and 30″ blades) (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts

335-232 6-07857060785

2-11/16 none 5/16 1-1/4 1-3/4 .120

Air lift set contains: (2) 2 hole defl ectors, (4) star lock washers, (4) 5/16″-24 X 21/32″ grade #5 - oval head screws and (4) hex nuts

STIGA355-027 1134-1452-01 12-1/4 .397 .335 3.25 2 .150

For Stiga Villa


09-22


HoleOuterHole

Centre/Centre

Width Thick

B B

355-247 1111-2759-01 12-11/16 3/4 none none 1-9/16 .095

355-007 1134-1903-00 14-1/2 .399 .334 3.24 2 .150

For Stiga Park

355-026 1134-0456-00 14-1/2 .397 .335 3.25 2 .150

For Stiga Villa

355-005 1134-2450-01 1134-9002-01

15 13/32 11/32 3-9/32 2 .150

For Stiga Park models 100M, 102M and Villa.

355-030 1111-1530 18-1/8 .385 .326 2.12 2 .134

For Stiga / Multiclip.

355-139 1111-2442-021111-9076-01

20-1/8 .411 .341 2.135 2 .160

355-141 1111-9109-01 20-1/8 .411 .442 2.135 2 .160

For Stiga model Multiclip Pro 5/S (Same as above with larger outer holes)

355-246 1111-2598-01 20-13/16 13/32 5/16 2-1/8 3-5/16 .095

SWISHER360-573 3295 17-1/2 13/32 13/32 3 2-1/2 .187

(3) for 50″ cut. Fits Swisher models: ZT2350A and ZT2450A

355-732 660-1 20-1/2 .655X

.755


(3) for 60″ cut

355-050 9004 20-1/2 13/32 13/32 3 2-1/4 .187

(3) for 60″ cut, model T-60 Finish Cut Trailmower.

360-575 3293 20-1/2″ 13/32 13/32 3 2-1/2 .187

(3) for 60″ cut. Fits Swisher models: T-60, T1360, T14560, T18560, T1360H, ZT2350, ZT2560, ZT2660 and ZT2660B.

355-051 9005 22 13/32 13/32 3 2-1/4 .187

(2) for 44″ cut, model T-44 Finish Cut Trailmower.

STIGA continued

09-23


HoleOuterHole

Centre/Centre

Width Thick

B B

345-128 72-7690 10-1/2 5/8 none none 2-1/2 .134

Centre blade for 48″ Recycler. Takes (1) 345-128, (1) 345-120 and (1) 345-053 for 48″ cut.

350-025 100777 101335108040

12-1/8 3/4 X 5/8

1/4 1-5/8 2 .203

8969 / 9188(2) 350-025 and (1) 350-033 for 36” cut, High lift blade for 1973 thru 1976 mowers. Fits long and short frame tractors. Plus, Commando 800, 5-0720, 5-0721, 5-0722, 65-26M201 and 1-100776. (Set# 101335 / 100777). NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN SETS.

350-116 106077 106636

13-7/8 3/4 none none 2 .203

117192 / 3-11620(3) for 42″ cut, side discharge, Set# 106636 / 3-11620.



350-057 108-4081-03 14 5/8 none none 250 .250

(3) for 40″ cut. For 40″ Turbo Force, 14 High Sail (STD). (While Quantities Last)

350-041 1002006693

14 3/4X 5/8

1/4 1-5/8 2 .203

(3) for 42″ cut, side discharge. Set# 6693 / 3-6693. Models R1-426, 5-1000 thru 5-1001, 5-1002, 5-1010, 5-1011, 5-1421 thru 5-1423 and 65-42 MS01, from 1966 thru 1976.

350-033 100776 101335 9187

14-1/8 3/4X 5/8

1/4 1-5/8 2 .203

(1) 350-033 & (2) 350-025 for 36” cut, High lift blade for 1973 thru 1976 side discharge mowers. Set# 101335. Fits long & short frame tractors, Commando 800, 1-100776, 5-0720 thru 5-0722 and 65-26M201. NOTE: PRICED INDIVIDUALLY - SOLD ONLY IN SETS.

350-108 106108106635

14-1/2 3/4 none none 2 .203

(3) for 42″ cut, fi ts 42″ rear discharge mowers. Set# 106635.

345-112 79-292014-4879

14-1/2 3/4 none none 2-1/2 .187

(3) for 42″, Mulching blade - Recycler, fi ts ZTR mowers with 42″ decks.

335-453 112-0302 14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .150

(1) 335-453 and (2) 335-452 for 46″ cut. Mulching blade. Replaces the star centre hole. Centre blade, 1999 and after.

325-884 112-0302 14-7/8 6 point star (5/8)

3/8 2-1/2 2-1/2 .203

(1) 325-884 and (2) 325-885 for 46” cut. Heavy Duty Blade. Centre blade. Fits LT1046 and i1046 series mowers. For star hole replacement blade.

TORO / WHEEL HORSE

09-24


HoleOuterHole

Centre/Centre

Width Thick

B B

345-454 54-0010 15-1/2 5/8 none none 2-1/2 .187

(3) for 44″ cut, deck# 57358, Fits Groundsmaster models 117 and 1144 Rider Tractors.

345-039 55-4940 15-1/2 5/8 none none 2-1/2 .203

(3) for 44″ cut, High lift blade fi ts model 30144 - 44″ Midsize cutting mower



345-114 92-795292-7952-03

15-1/2 5/8 none none 2-1/2 .187

(3) for 44” cut. Fits TimeCutter ZX440 Recycler.

350-124 10-6078 10-66373-10607

16-1/16 3/4 none none 2 .203

(3) for 48″ cut side discharge, Set# 3-10607



335-452 112-0304 16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .150

(2) 335-452 & (1) 335-453 for 46″ cut. Mulching blade. Replaces the star centre hole. Outside blade, 1999 & after.

325-885 112-0304 16-3/8 6 pointstar (5/8)

3/8 2-1/2 2-1/2 .203

(2) 325-885 and (1) 325-884 for 46” cut. Heavy Duty Blade. Outer / Side blades. Fits LT1046 and i1046 series mowers. For star hole replacement blade.

345-502 107-3192 16-1/2” 5/8 none none 2-1/2 .250

(3) for 48” cut. High Lift, Heavy duty blade. Fits Toro / Wheel Horse mowers. Lift: 1”

350-199 113579 17 5/8 none none 2 .204

(3) for 50″ cut, Fits Wheel Horse 718Z and 724Z, also replaces Dixie Chopper# 30227-50.

345-505 113579 17 5/8 none none 2-1/2 .250

(3) for 50” cut. High Lift blade. Heavy duty blade. Fits Wheel Horse 718Z and 724Z, Replaces Dixie Chopper# 30227-50.

TORO / WHEEL HORSE continued

09-25


HoleOuterHole

Centre/Centre

Width Thick

B B

345-212 112-9759 112-9759-03

17-1/2 5/8 none none 2-1/4 .164

(3) for 50″ cut, Standard Lift blade. Fits Toro Timecutter Z series.

345-210 110-6837110-6837-03

17-1/2 5/8 none none 2-1/4 .170

(3) for 50” cut, Heavy duty blade. High lift blade. Fits Toro Timecutter Z5000, model 74370 Time Cutter 74375.(Will replace Toro# 115-5059-03 if (3) blades ordered).


(3) for 50″ cut, Shark Tooth mulching blade. Fits Toro Timecutter Z,

325-510 17-7/8 6 pointstar (5/8)

none none 2.375 .164

(3) for 50″ cut - Standard Duty blade. Found on Toro models LX500 and GT2100 with 50″ cut decks.

325-507 112-0316 17-7/8 6 pointstar (5/8)


(3) for 50” cut - Heavy Duty blade. Found on Toro models: LX500 and GT2100 with 50” cut decks. (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011). NOTE: For standard duty blade see our 325-510, Shark Tooth Blade see our 360-076.


none none 2-1/2” .187

(3) for 50” cut, Shark Tooth Mulching blade. Found on Toro LX500 and GT2100 mowers equipped with 6 star blade spindles. (Found on MTD rider model#s 13AA925P004, 17AF2ACP004, 17BF2ACP011).

345-553 105-7781105-7781-03

18 5/8 none none 2-1/2 .250

(3) for 52” cut. Heavy duty blade. Fits Z Master mower.

360-918 105-7796 18 5/8 none none 2-1/2 .203

(2) for 36″ cut or (3) for 52″ cut, Shark Tooth Mulching blade. Fits Toro Commercial Z-Master series. Replaces Atomic blade Toro# 105-7796-03 if you order (3) 360-918 blades.

345-462 56-2390 18 1/2 none none 2-1/2 .187

(2) for 36” cut and (3) for 52” cut walk behind mowers. High lift blade.

345-018 27-099044-5480

18 1/2 none none 2-1/2 .187

(3) for 52″ cut or (2) for 36″ cut for Groundsmaster, also used on ZTR’s.

345-046 92-7961 18 1/2 none none 2-1/2 .203

(3) for 52″ cut, Mulching blade - Recycler.




(3) for 52″ cut, Shark Tooth mulching blade - HEAVY DUTY.


09-26


HoleOuterHole

Centre/Centre

Width Thick

B B

345-439 55-4210 18 5/8 none none 2 .187

(2) for 36″ cut or (3) for 52″ cut. Fits models 30136 and 30152, midsize mowers.

345-470 40-3760 18 5/8 none none 2 .203

(3) for 52″ cut, Fits models GM117.

345-464 107-1741 107-1741-03

18 5/8 none none 2-1/2 .187

(3) for 52″ cut. For Toro Time Cutter ZX models.

345-465 107-1742 107-1742-03

18 5/8 none none 2-1/2 .187

(3) for 52″ cut. For Toro Time Cutter ZX Recycler models.



350-082 7906111168014

18-5/16 3/4 X 5/8

1/4 1-5/8 1-3/4 .203

(1) 350-082 and (1) 350-090 for 36” cut. (PRICED INDIVIDUALLY - SOLD ONLY IN SETS). Must order (1) each part# 350-082 and 350-090 = one set. Set# 8014, For 1961 thru 1972 gear driven 36” mowers. Fits RMR-3661 / 3662, RM363 - 367, RL-366 / 367, 5-1361, 5-1362, 5-2361 and 5-2362. (While Quantities Last)

350-090 7907141178014

18-5/16 3/4 X 5/8

1/4 1-5/8 1-3/4 .203

(1) 350-090 and (1) 350-082 for 36” cut. (PRICED INDIVIDUALLY - SOLD ONLY IN SETS). Must order (1) each part# 350-090 and 350-082 = one set. Set# 8014, For 1961 thru 1972 gear driven 36” mowers. (While Quantities Last).

350-157 109918109079

18-3/4 3/4 none none 2 .203

(2) for 37″ cut, side discharge mowers, Set# 109079

360-415 115-4999 18-3/4 5/8 none none 2-1/4 .164

(3) for 54” cut, Shark Tooth mulching blade. Fits Toro Titan ZX54000. (3) required to replace Toro# 115-4999-03.

345-272 3-0662 19 7/16 none none 2-1/4 .155

19″ cut, use with our 405-167 blade adapter. (While Quantities Last)

345-298 8-5240 19 7/16 none none 2-1/4 .140

19″ cut, fi ts Whirlwind 1972 - 1976 & Guardian 1971 - 1973, walk behind mowers - use with our 405-175 blade adapter.

345-330 20-2730 19 7/16 none none 2-1/4 .140

Fits old Whirlwind and Guardian mowers, use with our 405-175 blade adapter. (While Quantities Last)

345-043 86-0010106-7166

19 1/2 none none 2-1/2 .250

(7) blades required for 455D model.


09-27


HoleOuterHole

Centre/Centre

Width Thick

B B

345-041 88-5140 885-140-03

19-1/4 5/8 none none 2-1/2 .187

(2) for 38″ cut, Time Cutter Z models.

345-165 79-306179-306014-7799

19-1/4 5/8 none none 2-1/2 .187

(2) for 38″ cut, Mulching blade - Recycler, fi ts Zero Turn ZTR models 616 and 620.

345-038 57-4700 19-1/4 5/8 none none 2-1/2 .187

(2) for 38″ cut, High lift blade, side discharge, fi ts models 612, 616 and 620 ZT units, also fi t 200 series side discharge


(2) for 38″ cut, Shark Tooth mulching blade. (For heavy Duty version see our 360-802)


(2) for 38″ cut, Shark Tooth mulching blade. (Heavy Duty version of our 360-802)

345-050 112-8841 112-8841-03

19-3/4 7/16 3/8 2-7/16 2-1/4 .129

Pushmower blade for 20” cut model. (fi ts 789963 with 20” decks).

360-803 110-5948110-5948-03

19-15/16 1/2 none none 2-1/2 .250

For GROUNDSMASTER 5900 / 5910. Shark Tooth mulching blade. Heavy duty blade. Requires (9) blades for 16 FT cut or (3) blades per deck X 3 decks.

345-275 93-0241 20-1/4 7/16 none none 2-1/4 .134

21″ cut, Recycler with 4.5 Hp engine, model 20444, walk behind.

345-171 112947 20-1/2 5/8 none none 2-1/2 .204

(3) for 60″ cut, Wheel Horse models.

345-555 1057718 20-1/2 5/8 none none 2-1/2 .250

(3) for 60″ cut, Heavy duty blade

345-051 93-410693-4106-03

20-7/8 7/16 3/8 2-7/16 2-1/4 .150

108-762 / 108-3762-0321″ cut, for aluminum deck - walk behind mowers.

360-804 see above 20-7/8 7/16 3/8 2-7/16 2-1/4 .149

21″ cut, Shark Tooth mulching blade for aluminum deck recycler


09-28


HoleOuterHole

Centre/Centre

Width Thick

B B

345-203 11-941991-2256

20-15/16 7/16 3/8 2-7/16 2-1/4 .134

*Includes Stiffi ner plate* 14-1659 / 14-9419 75-9420 / 91-2256 80-0510 / 80-0510-0321″ cut, Recycler, Now includes stiffening plate, for walk behind mowers.

345-496 62-7700 20-15/16 7/16 3/8 2-7/16 2-1/4 .134

21″ cut, Super high lift blade, Vacu - Power - rear bagger, model 26622

360-420 see above 20-15/16 7/16 3/8 2-7/16 2-1/4 .150

21″ cut, Shark Tooth blade.

345-280 3-0663 21 7/16 none none 2-1/4 .155

21″ cut, older walk behind mower, use with our 405-167 blade adapter. (While Quantities Last)

345-306 8-5230 21 7/16 none none 2-1/4 .134

21″ cut, fi ts Guardian models 1971 thru 1973 and Whirlwind models 1972 thru 1976.

345-348 20-2720 21 7/16 none none 2-1/4 .134

21″ cut, fi ts Whirlwind II model, 1977 and later.

345-397 26-088042-1000

21 7/16 3/8 2-7/16 2-1/4 .134

21″ cut, fi ts Toro rear bagger and Grassmaster models with blade brake clutch, 1974 thru 1977.

335-551 112-0315 21-3/16 6 pointstar (5/8)

5/16 2-1/2 2-3/4 .149

(2) for 42” cut, star center hole, 3 in 1 mulching blade, deep deck - 1997 & after; autodrive 1999 & after; also fi ts on newer Toro mowers using the 5 point blade hub, model 13AX60RG744. (Found on MTD rider model# 17AC2ACG055, 17AE2ACG004, 17BE2ACG011).

345-421 44-6250 21-1/2 1/2 none none 2-1/2 .187

(3) for 62″ cut, Groundmaster.


(3) for 62″ cut, Groundmaster, Shark Tooth mulching blade, HEAVY DUTY

345-045 92-5608 21-11/16 1/2 none none 2-1/2 .250

(3) for 62” cut. Recycler or (7) for 11 FT Groundsmaster 4000D. Heavy duty blade.


(3) for 62” cut, Shark Tooth mulching blade.


09-29


HoleOuterHole

Centre/Centre

Width Thick

B B

345-227 106-2247-03110-1857-03

21-11/16 5/8 none none 2-1/4 .160

(2) for 42” cut, Fits Toro model Time Cutter Z - Standard lift blade.

345-225 110-6568 110-6568-03

21-11/16 5/8 none none 2-1/4 .164

(2) for 42" cut, Fits Toro model Time Cutter Z. High lift blade.



360-820 106-8744106-8744-03

21-11/16 5/8 none none 2-1/4 .164

(2) for 42″ cut. For Time Cutter 42″ Z Deck. (For standard blade see our 345-227)

345-322 104-8697-03108-9764-03

21-3/4 7/16 none none 2-1/4 .150

22″ cut, fi ts on atomic 22″ mowers.


Shark Tooth mulching blade.

345-053 72-7740 23 5/8 none none 2-1/2 .187

Fits 48” midsize recycler. Takes (1) 345-053, (1) 345-120 and (1) 345-128. Right hand blade (RH cut).

345-120 72-7730 23 5/8 none none 2-1/2 .187

Fits 48” midsize recycler. Takes (1) 345-120, (1) 345-053 and (1) 345-128. Left hand blade (LH cut).

345-412 105-7784 24-1/2 5/8 none none 3 .250

(3) for 72” cut, High lift blade, Heavy duty blade.

360-808 110-0624-03 24-1/2 1/2 none none 2-1/2 .250

(3) for 72” cut, Shark Tooth mulching blade. Fits Toro Groundsmaster 3280 - D3320.

345-223 57-025094-186194-1861-03

24-3/4 1/2 none none 2-1/2 .204

(3) for 72″ cut Groundmaster - rear discharge.


(3) for 72” cut, Shark Tooth mulching blade. Fits Toro Groundsmaster - rear discharge.

345-444 98-3028 25 7/8 1/4 3 2-1/2 .187

(1) 345-444 and (1) 345-443 for 48″ cut, Right hand cut blade, fi ts model 320

345-443 98-3029 25 7/8 1/4 3 2-1/2 .187

(1) 345-443 and (1) 345-444 for 48″ cut, Left hand cut blade, fi ts model 320


09-30


HoleOuterHole

Centre/Centre

Width Thick

B B

345-314 29-5530 25 3/4 none none 2-1/2 .250

(3) for 72″ cut, Left hand cut blade for Groundsmaster, Heavy duty blade.

360-828 see above 25 3/4 none none 2-1/2 250

(3) for 72″ cut, Shark Tooth mulching blade, Left hand cut, Heavy Duty blade.

345-177 85-6040 25-3/16 1/2 none none 2-1/2 .250

(3) for 72″ cut, Heavy duty blade, Recycler deck blade, used on Groundsmaster models 322, 322D, 325 & 325D

345-034 80-4530 25-3/16 5/8 none none 2-1/2 .187

25″ cut, Mulching blade, rear engine rider

345-157 67-0200 25-1/4 5/8 none none 2-1/2 .187

25″ cut.

360-830 100-5754-03 105-9810-03 107-0235-03

27 1/2 none none 2-1/2 .250

Shark Tooth mulching blade. (1) for 27″ Long blade for each individual rotary deck.Found on Toro Groundsmaster models: 3500D, 3505D, 4500D and 4700D. Note: Will replace Toro mulching blade#’s 100-5754-03 and 105-9810-03

345-413 33-4750 31-3/8 5/8 none none 2-1/2 .187

32″ cut, High Lift blade.

345-338 80-4430 31-3/8 5/8 none none 2-1/2 .187

32″ cut, Mulching blade - Recycler for rear engine riders.


32″ cut, Shark Tooth mulching blade. (While Quantities Last)

TROY BILT - see BOLEN / TROY BILT & MTD LISTINGS

WALKER

355-095 5705-0 20 5/8 13/64 3 2-3/4 .164

(3) for 54″ cut, side discharge. Note: Not for use on Walker DSD54″ decks.

355-097 5705-4 22 5/8 13/64 3 2-3/4 .164

(1) 355-097 and (1) 355-098 for 42″, (3) for 54″ cut; rear discharge, Left hand cut blade

355-098 5705-3 22 5/8 13/64 3 2-3/4 .164

(1) 355-098 and (1) 355-097 for 42″, (3) for 54″ cut; rear discharge, Right hand cut blade.


09-31


HoleOuterHole

Centre/Centre

Width Thick

B B

355-099 7705-2 25 5/8 13/64 3 2-3/4 .187

(1) 355-099 and (1) 355-100 for 48″, rear discharge, Left hand cut blade

355-100 7705-1 25 5/8 13/64 3 2-3/4 .187

(1) 355-100 and (1) 355-099 for 48″, rear discharge, Right hand cut blade

WHEEL HORSE - see TORO / WHEEL HORSE

WHITE - see MTD

WOODS320-545 70014 15 1/2 none none 2 .203

(3) for 44″ cut, standard lift blade.

330-428 12170 16-3/4 5/8 none none 1-3/4 .203

(3) for 48″ cut, fi ts models RM48K, 304K, U304H, U304M15, 348’S.

345-751 5081 16-3/4 5/8 none none 1-3/4 .203

(3) for 48″ cut, Left hand cut blade, fi ts models FM48, FM842 and RM400

320-546 70104 18 1/2 none none 2 .203

(3) for 52″ cut



345-769 6950 20-3/16 5/8 none none 2 .204

(3) for 60″ cut, model 59C2, medium lift

345-777 2382531359

20-1/4 5/8 none none 2 .204

(3) for 60″ cut, Left hand cut blade, fi ts models RM500, F35 and RM59.

345-433 3461515127

20-11/16 5/8 none none 2-1/2 .240

(3) for 60″ cut, High lift blade, fi ts new tunnel deck. Models RM360 and RM550, Heavy duty blade.

WALKER continued

09-32


HoleOuterHole

Centre/Centre

Width Thick

B B

320-547 70134 21 1/2 none none 2-1/2 .250

(3) for 61″ cut, Heavy duty blade.



345-764 1340431306

24-1/2 1 none none 2-1/2 .204

(3) for 72″ cut, Left hand cut blade, fi ts models L306, RM306 and RM660. Heavy duty blade.

345-434 15127 24-11/16 5/8 none none 2-1/2 .240

(3) for 72″ cut, High lift blade, fi ts new tunnel deck. Models RM372 and RM660, Heavy duty blade.

YANMAR - see above WOODS listings

YARDMAN - also see MTD350-264 41961-61 16-7/16 1-1/4 11/32 3-1/8 2 .149

(2) for 32″ cut, also found on Midwest mowers. (While Quantities Last)

350-272 3604-45 18-1/4 1-1/4 11/32 3-1/8 2 .155

(2) for 36″ cut, also found on Midwest mowers (While Quantities Last)

350-306 3604-41 25 1 none none 2-1/2 .155

(While Quantities Last)

YAZOO / KEES350-603 206-660 20-3/4 3/4

X 1-1/4


(3) for 60″ cut, Right hand cut blade. Heavy duty blade.

350-538 206-760 20-7/8 3/4 X

1-1/4

5/16 3 2-1/4 .240

(3) for 60″ cut, Left hand cut blade. Heavy duty blade.

350-546 206-622 22 3/4 X

1-1/4


22″ cut, fi ts Big Wheel mower or (2) for 44″ cut.

“BLADE by LENGTH CHART” starts on Page 09-35

WOODS continued

09-33

Banta BLADES - O.E.M. REPLACEMENT

B B

Part# OEM# Length Centre Hole

Type Design Width SteelThick

375-378 Weedeater#701557902343AYP# 85713

7 9/16D-Hole

S/4 SC 1-1/2 .095

Fits Weedeater models: 4000 and 4500. Left hand cut. Also fi ts AYP model 795535.

375-364 Multi- Application

7-11/16 1 NS SC 2 .125

Fits Maruyama Trimmer / Edger, Green Machine & Echo Trimmer / Edger & Stihl FC 72 trimmer. Replaces: Echo# 72720237001, Green Machine# 237001, Husqvarna# 601000749, Maruyama# 216062, McCulloch# 301272, Red Max# 636715110, Ryobi# 613223 / 613233R, Shindaiwa# 7295092110 and Stihl# 4133-713-4101.

375-311 Universal 9 OD 1/2 4Star

9OD

13gauge

Curvature of blade prevents clogging.

375-089 John Deere#M47147

9 1/2 S/2 SC 2 .155

Fits #2 and #3 edgers. Heavy duty. This edger blade has a universal type centre hole, it will accept a 1/2″ round or 7/16″ square shaft.

375-316 MTD#781-0080

9 5/8 NS RE3T 2-1/2 .095

Trail mate / Cooper blade. Replaces MTD# 781-0080

375-403 Universal 10 1/2 S/4 AB & AC

2 .120

Angle Beveled Edger Blade

375-022 McLane#2059-HD-10

10 1/2 S/4 SC 2 .150

Used on Commercial Edgers

375-162 UniversalTanaka#43533110200

10 1/2 S/2 SC 2 .149

TypeS/2---------Sharpened, 2 SidesS/4---------Sharpened, 4 SidesNS---------------Not Sharpened

DesignSC------------Straight Cut EdgeRE3T ------------ Rounded Edges, 3 TeethtAB ------------ Angle Beveled EdgeAC ------------ Angle Cut Edge

If you have not yet visited our web site @ www.bantasaw.com, Please take a look. Our search engine is fast and easy to use. You can enter a Banta part#, a product name, description or an OEM# (original equipment manufacturers #). Our search engine will

generate a list for you shown by these categories. You can register and order on-line using a Visa or Mastercard. By using our web site you will see the most up to date

products and pricing information available.

EDGER BLADES

09-34

blades - o.e.m. replacement banta · mulching blade for deep deck riding mowers, 1998 and after....

Documents