black,black, white & red hot white & red hot white and … · black,black, white & red hot white &...

of 5 /5
Black, White & Red Hot Black, White & Red Hot Finished Runner Size: 78” x 30” 49 West 37th Street, New York, NY 10018 tel: 212-686-5194 fax: 212-532-3525 Toll Free: 800-294-9495 www.henryglassfabrics.net Please check our website for pattern updates before starting this project. Runner Skill Level: Advanced Beginner Runner Design by Heidi Pridemore A Free Project Sheet NOT FOR RESALE

Author: others

Post on 01-Jun-2020

22 views

Category:

Documents


0 download

Embed Size (px)

TRANSCRIPT

  • Black, White & Red HotBlack, White & Red Hot

    Finished Runner Size: 78” x 30”49 West 37th Street, New York, NY 10018

    tel: 212-686-5194 fax: 212-532-3525Toll Free: 800-294-9495

    www.henryglassfabrics.netPlease check our website for pattern updates before starting this project.

    RunnerSkill Level: Advanced Beginner

    Runn

    er D

    esig

    n by

    Hei

    di P

    ridem

    ore

    A Free Project SheetNOT FOR RESALE

  • Black, White & Red HotFabrics in the Collection

    Finished Runner Size: 78” x 30”

    Runner

    Select Fabrics from Modern Melody Basics

    Medallion - White/Multi2440-1

    Medallion - Red2440-88

    Arabesque - Red2441-88

    Arabesque - Black2441-99

    Chevron Fern - White/Multi2442-1

    Tear Drops - White2443-1

    Paisley - White/Multi2444-1

    Geo Plaid - White2445-1

    Crimson Red1063-88

    Wine1063-89

    Silver Gray1063-90

    Dark Gray1063-91

    Black1063-99

    Geo Plaid - Black/Multi2445-99

    Berry Vine - White/Multi2447-1

    Berry Vine - Black/Multi2447-99

    Paisley - Black/Multi2444-99

    Tear Drops - Black2443-99

    Chevron Fern - Black/Multi2442-99

    Medallion - Black2440-99

    Black, White & Red Hot FlowerWhite/Multi – 2439-1

  • Page 1Black, White & Red Hot Runner

    Cutting Instructions Please note: all strips are cut across the width of fabric (WOF) from selvage to selvage edge unless otherwise noted.

    Materials⅜ yard Black, White and Red Hot Flowers - White/Multi (A) 2439-1⅞ yard Berry Vine - Black/Multi (B) 2447-99*¼ yard Modern Melody Basics - Crimson Red (C) 1063-88¾ yard Paisley - White/Multi (D) 2444-1⅓ yard Modern Melody Basics - Dark Gray (E) 1063-91½ yard Modern Melody Basics - Silver Gray (F)1063-90½ yard Modern Melody Basics - Wine (G) 1063-89⅓ yard Geo Plaid - Black/Multi (H) 2445-99⅓ yard Tear Drops - White (I) 2443-1⅓ yard Berry Vine - White/Multi (J) 2447-1¼ yard Paisley - Black/Multi (K) 2444-99¾ yard Medallion - Red (L) 2440-882 ½ yards Medallion - White/Multi (Backing) 2440-1

    *Includes binding

    From the Black, White and Red Hot Flower - White/Multi (A), cut:• (2) 4 ½” x WOF strips. Sub-cut (12) 4 ½” squares.

    From the Berry Vine - Black/Multi (B), cut:• (1) 3 ¼” x WOF strip. Sub-cut (12) 3 ¼” squares. Cut the squares across both diagonals to make (48) 3 ¼” triangles.• (2) 2 ⅞” x WOF strips. Sub-cut (24) 2 ⅞” squares. Cut the squares across (1) diagonal to make (48) 2 ⅞” triangles.• (6) 2 ½” x WOF strips for the binding.

    From the Modern Melody Basics - Crimson Red (C), cut:• (1) 3 ¼” x WOF strip. Sub-cut (12) 3 ¼” squares. Cut the squares across both diagonals to make (48) 3 ¼” triangles.• (1) 2 ⅞” x WOF strip. Sub-cut (12) 2 ⅞” squares. Cut the squares across (1) diagonal to make (24) 2 ⅞” triangles. From the Paisley - White/Multi (D), cut:• (2) 3 ¼” x WOF strips. Sub-cut (24) 3 ¼” squares. Cut the squares across both diagonals to make (96) 3 ¼” triangles.• (6) 2 ½” x WOF strips. Sub-cut (48) 2 ½” x 4 ½” strips.

    From the Modern Melody Basics - Dark Gray (E), cut:• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

    From the Modern Melody Basics - Silver Gray (F), cut:• (4) 2 ⅞” x WOF strips. Sub-cut (48) 2 ⅞” squares.

    From the Modern Melody Basics - Wine (G), cut:• (4) 2 ⅞” x WOF strips. Sub-cut (48) 2 ⅞” squares.

    From the Geo Plaid - Black/Multi (H), cut:• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

    From the Tear Drops - White (I), cut:• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

    From the Berry Vine - White/Multi (J), cut:• (3) 2 ½” x WOF strips. Sub-cut (48) 2 ½” squares.

    From the Paisley - Black/Multi (K), cut:• (1) 3 ½” x WOF strip. Sub-cut (4) 3 ½” squares.

    From the Medallion - Red (L), cut:• (4) 3 ½” x WOF strips. Sew the strips together end to end with diagonal seams and cut (2) 3 ½” x 72 ½” strips.• (2) 3 ½” x 24 ½” WOF strips.

    From the Medallion - White/Multi (Backing), cut:• (1) 86” x 38” strip for the back.

    Unit 1make 96

    GF

    D

    Unit 2make 24

    BC

    Fig. 1 Fig. 2 Fig. 3

    Fig. 4

    Block Assembly Note: Pay attention to the unit orientations when assembling the various components.1. Place (1) 2 ⅞” Fabric G square on top of (1) 2 ⅞” Fabric F square, right sides together. Draw a line across the diagonal of the top square from the upper right corner to the lower left corner (Fig. 1). Sew ¼” away from each side of the drawn diagonal line (Fig. 1). Cut the (2) squares apart on the drawn diagonal line (Fig. 2) to make (2) half-square triangles. Trim the half-square triangles to measure 2 ½” square to make (2) Unit 1 squares (Fig. 3). Repeat to make (96) Unit 1 squares total.

    2. Sew (1) 3 ¼” Fabric D triangle and (1) 3 ¼” Fabric B triangle together to make (1) DB triangle. Sew (1) 2 ⅞” Fabric C triangle to the long side of the DB triangle to make (1) Unit 2 square (Fig. 4). The unit should measure 2 ½” square. Repeat to make (24) Unit 2 squares total.

  • Page 2Black, White & Red Hot Runner

    Fig. 10 Fig. 11

    Fig. 15

    Fig. 19Fig. 12

    Fig. 16

    Fig. 20Fig. 13

    Fig. 17

    Fig. 14

    Fig. 18

    Unit 8make 24

    DE E

    Unit 9make 24

    DJ J

    Unit 10make 12

    Unit 8

    Unit 6

    Unit 9

    Unit 11make 12

    Unit 6

    Unit 12make 12

    Unit 9

    Unit 7

    Unit 8

    Unit 13make 12

    Unit 7

    Unit 14make 24

    Unit1

    Unit1

    I

    H

    D

    Unit 3make 24

    BC

    D

    Unit 4make 24

    BC

    D

    Unit 5make 24

    CB

    Unit 6make 24

    Unit2

    Unit3

    Unit 7make 24

    Unit4

    Unit5

    Fig. 5 Fig. 7Fig. 6

    Fig. 8 Fig. 9

    3. Repeat Step 2 and refer to Figures 5-7 for fabric identification, placement and orientation to make (24) 2 ½” Unit 3 squares, (24) 2 ½” Unit 4 squares and (24) 2 ½” Unit 5 squares.

    4. Sew (1) Unit 2 square to the left side of (1) Unit 3 square, along the Fabric B sides, to make (1) Unit 6 strip (Fig. 8). Repeat to make (24) Unit 6 strips total.

    5. Sew (1) Unit 4 square to the left side of (1) Unit 5 square, along the Fabric C sides, to make (1) Unit 7 strip (Fig. 9). Repeat to make (24) Unit 7 strips total.

    6. Place (1) 2 ½” Fabric E square on the left side of (1) 2 ½” x 4 ½” Fabric D strip, right sides together (Fig. 10). Sew across the diagonal of the square from the upper right corner to the lower left corner (Fig. 10). Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance. Flip open the triangle formed and press (Fig. 11).

    7. Place another 2 ½” Fabric E square on the right side of the 2 ½” x 4 ½” Fabric D strip, right sides together (Fig. 12). Sew across the diagonal of the square from the upper left corner to the lower right corner (Fig. 12). Trim away the excess fabric from behind the triangle, leaving a ¼” seam allowance. Flip open the triangle formed and press to make (1) Unit 8 strip (Fig. 13).

    9. Repeat Steps 6-7 and refer to Figure 14 for fabric identification, placement and seam direction to make (24) Unit 9 strips.

    10. Sew (1) Unit 8 strip to the top of (1) Unit 6 strip to make (1) Unit 10 square (Fig. 15). The unit should measure 4 ½” square. Repeat to make (12) Unit 10 squares total.

    11. Repeat Step 10 and refer to Figures 16-18 for component identification, placement and orientation to make (12) 4 ½” Unit 11 squares, (12) 4 ½” Unit 12 squares and (12) 4 ½” Unit 13 squares.

    8. Repeat Steps 6-7 to make (24) Unit 8 strips total.

    Unit 15make 24

    Unit1

    Unit1 H

    I

    12. Sew (1) Unit 1 square to the left side of (1) 2 ½” Fabric I square. Sew (1) 2 ½” Fabric H square to the left side of (1) Unit 1 square. Sew the (2) strips together lengthwise to make (1) Unit 14 square (Fig. 19). Repeat to make (24) Unit 14 squares total.

    13. Sew (1) 2 ½” Fabric I square to the left side of (1) Unit 1 square. Sew (1) Unit 1 square to the left side of (1) 2 ½” Fabric H square. Sew the (2) strips together lengthwise to make (1) Unit 15 square (Fig. 20). Repeat to make (24) Unit 15 squares total.

  • Page 3Black, White & Red Hot Runner

    Fig. 21

    Fig. 22

    Every effort has been made to ensure that all projects are error free. All the information is presented in good faith, however no warranty can be given nor results guaranteed as we have no control over the execution of instructions. Therefore, we assume no responsibility for the use of this information or damages that may occur as a result. When errors are brought to our attention, we make every effort to correct and post a revision as soon as possible. Please make sure to check www.henryglassfabrics.net for pattern updates prior to starting the project. We also recommend that you test the project prior to cutting for kits. Finally, all free projects are intended to remain free to you and are not for resale.

    ©2019 Henry Glass & Co., Inc.

    Runner Layout

    Runner Top Assembly(Follow the Runner Layout while assembling the runner top)16. Sew together (3) Block One squares and (3) Block Two squares, alternating them, to make Row One.

    17. Sew together (3) Block Two squares and (3) Block One squares, alternating them, to make Row Two.

    18. Sew the (2) Rows together, in numerical order, to make the Center Block.

    19. Sew (1) 3 ½” x 24 ½” Fabric L strip to each side of the Center Block. Sew (1) 3 ½” Fabric K square to each end of (1) 3 ½” x 72 ½” Fabric L strip. Repeat to make a second strip. Sew the strips to the top and to the bottom of the Center Block to make Runner Top.

    20. Layer and quilt as desired.

    21. Sew the (6) 2 ½” x WOF Fabric B strips together, end to end with 45-degree seams, to make the binding. Fold this long strip in half lengthwise with wrong sides together and press.

    22. Bind as desired.

    Block Onemake 6

    Unit14

    Unit10

    Uni

    t11

    Unit

    11

    Unit10

    Unit14

    Unit15

    Unit15

    A

    Block Twomake 6

    Unit12

    Unit12

    Unit14

    Unit14

    Unit15

    Unit15

    Uni

    t13

    Unit

    13A

    1

    1

    2 2 2

    2 12 12

    1 1

    K L

    L L

    L

    K

    K K

    14. Sew (1) Unit 14 square, (1) Unit 10 square and (1) Unit 15 square together in that order to make the top row. Repeat to make the bottom row. Sew (1) Unit 11 square to each side of (1) 4 ½” Fabric A square to make the middle row. Sew the (3) rows together to make (1) Block One square (Fig. 21). Repeat to make (6) Block One squares total.

    15. Sew (1) Unit 14 square, (1) Unit 12 square and (1) Unit 15 square together in that order to make the top row. Repeat to make the bottom row. Sew (1) Unit 13 square to each side of (1) 4 ½” Fabric A square to make the middle row. Sew the (3) rows together to make (1) Block Two square (Fig. 22). Repeat to make (6) Block Two squares total.