bla cover en pdf 160518 - tohnichi · the iso standard iso 8995-1:2002 (cie 2001/iso 2002) states...
TRANSCRIPT
Receiver LED x 4
SELECT Switch
SET Switch
RS232C
Power
App
rox.
266
46
Antenna
90°
Status Lamp
LCD Display
Serial No.
Power Terminal
I/O Terminal121
160
134
174
LED
38.5
73
20.5
32.4
34.4
ID
19.5
23.2
BLA
R-BLA
T-BLA Battery Life
POWER
Step One
Transmitter ID
Step Three
Step Two
Intput:Reset, Start, End, Work sensor
Output:OK, NGrelay signaletc.
RS232C Relay signal x 4
PLCLampStopper etc.
FA System
PLC,Switches,proximi-ty-sensors
PCPLC
PLCLampStopper etc.
FA System
Out No.Header 8 digits ID Delimiter
Header 8 digits ID DelimiterRS No.
Illuminance (lx)
The ISO standard ISO 8995-1:2002 (CIE 2001/ISO 2002) states that in the areas where continuous work is carried out the maintained work place illuminance should not be less than 200 lx.
Recommended Indoor Light Levels
Warehouses, Homes, Theaters
Office, Class room
Office work, PC work,Study library, Groceries, Show rooms, Laboratories
Supermarkets, Mechanical workshops
Torque Tightening Proofing SystemTorque Tightening Proofing SystemFeaturesFeatures
Click！
Battery Less Wireless Torque Wrench
Wireless error-proofing/Pokayoke torque wrench to elimi-nate a missed tightening error which is No. 1 human error.
Adapting solar power generation system.No battery replacement required.Capable of charging battery under illuminance 200lx. Illuminance level at a general factory is between 350 and 750lx.
Operable in the lightless place after solar battery is charged.
Switching position autonomously to be charged.
Just three steps to execute pairing for receiver and transmitter.
Confirm transmitter ID which is on R-BL’s LED.
Battery less wireless torque wrench can be converted from LS type torque wrench.
T-BL can be mounted on standard torque wrenches such as QL, QSP, PQL,CL, CSP and PCL models of maximum torque range more than 25Nm andSP/RSP models more than 19Nm of the maximum torque range. For details,consult to Tohnichi distributor or Tohnichi.
Check communication status with LED on the side of transmitter.
Configuration example of error-proofing/Pokayoke system sending relay signal.
Configuration example of error-proofing/Pokayoke system sending transmiter ID.
Capable of easily installing error-proofing/Pokayoke system by connecting to CNA-4mk3.
Establishing traceability at assembly line by verifying transmitter ID.
ID output only
Relay signal and ID output
ID output up to 10 torque wrenches
Generating relay signal up to 4 torque wrenches
CNA-4mk3 Count checkerTightening No., Time management
Generating relay signal up to 4 torque wrenches.* Simultaneous reception from multiple torque wrenches cannot be done.
* Example of tightening management software.
Fully charged battery can be used continuously 400 times evenunder 0lx condition.
T-BLA
BLA
R-BLA
T-BLA Battery Life
POWER
Step One
Transmitter ID
Step Three
Step Two
Intput:Reset, Start, End, Work sensor
Output:OK, NGrelay signaletc.
RS232C Relay signal x 4
PLCLampStopper etc.
FA System
PLC,Switches,proximi-ty-sensors
PCPLC
PLCLampStopper etc.
FA System
Out No.Header 8 digits ID Delimiter
Header 8 digits ID DelimiterRS No.
Illuminance (lx)
The ISO standard ISO 8995-1:2002 (CIE 2001/ISO 2002) states that in the areas where continuous work is carried out the maintained work place illuminance should not be less than 200 lx.
Recommended Indoor Light Levels
Warehouses, Homes, Theaters
Office, Class room
Office work, PC work,Study library, Groceries, Show rooms, Laboratories
Supermarkets, Mechanical workshops
Torque Tightening Proofing SystemTorque Tightening Proofing SystemFeaturesFeatures
Click！
Battery Less Wireless Torque Wrench
Wireless error-proofing/Pokayoke torque wrench to elimi-nate a missed tightening error which is No. 1 human error.
Adapting solar power generation system.No battery replacement required.Capable of charging battery under illuminance 200lx. Illuminance level at a general factory is between 350 and 750lx.
Operable in the lightless place after solar battery is charged.
Switching position autonomously to be charged.
Just three steps to execute pairing for receiver and transmitter.
Confirm transmitter ID which is on R-BL’s LED.
Battery less wireless torque wrench can be converted from LS type torque wrench.
T-BL can be mounted on standard torque wrenches such as QL, QSP, PQL,CL, CSP and PCL models of maximum torque range more than 25Nm andSP/RSP models more than 19Nm of the maximum torque range. For details,consult to Tohnichi distributor or Tohnichi.
Check communication status with LED on the side of transmitter.
Configuration example of error-proofing/Pokayoke system sending relay signal.
Configuration example of error-proofing/Pokayoke system sending transmiter ID.
Capable of easily installing error-proofing/Pokayoke system by connecting to CNA-4mk3.
Establishing traceability at assembly line by verifying transmitter ID.
ID output only
Relay signal and ID output
ID output up to 10 torque wrenches
Generating relay signal up to 4 torque wrenches
CNA-4mk3 Count checkerTightening No., Time management
Generating relay signal up to 4 torque wrenches.* Simultaneous reception from multiple torque wrenches cannot be done.
* Example of tightening management software.
Fully charged battery can be used continuously 400 times evenunder 0lx condition.
T-BLA
Receiver LED x 4
SELECT Switch
SET Switch
RS232C
Power
App
rox.
266
46
Antenna
90°
Status Lamp
LCD Display
Serial No.
Power Terminal
I/O Terminal121
160
134
174
LED
38.5
73
20.5
32.4
34.4
ID
19.5
23.2