bios setup utility - go-gddq.com · bios setup utility main oc tweaker h/w ... copyright 1985-2005,...
TRANSCRIPT
1
2
BIOS SETUP UTILITY
Main OC Tweaker H/W Monitor Boot Security ExitAdvanced
System Overview
System TimeSystem Date
[ :00:09][Mon 11/16/2009]
Use [Enter], [TAB]or [SHIFT-TAB] toselect a field.
Use [+] or [-] toconfigure system Time.
Select ScreenSelect Item
+- Change FieldTab Select FieldF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
BIOS VersionProcessor Type
Processor SpeedMicrocode Update
Total Memory
Cache Size
DDRII_A1DDRII_B1DDR3_A1DDR3_B1
: P43C-ME P1.00: Intel (R) CPU
E3000 @ 3.40GHz (64bit): 3400MHz
: 1024KB: 1067A/A07
: 1024MBSingle-Channel Memory Mode
: 1024MB/400MHz DDR2_800: None: None: None
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
14
BIOS SETUP UTILITY
Main Advanced H/W Monitor Boot Security Exit
Overclocking may causedamage to your CPU andmotherboard.It should be done atyour own risk andexpense.
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
OC Tweaker Settings
CPU Frequency (MHz)PCIE Frequency (MHz)
Overclock Mode[266][100]
[Auto]
Ratio CMOS SettingIntel (R) SpeedStep (tm) tech.
[17][Enabled]
DRAM Timing Control
Ratio Status Unlocked (Min:12, Max:17)
Load Optimized CPU OC Setting [Press Enter]
[Auto]
Vcore : 1.232VCPU VoltageDRAM VoltageGTLRef VoltageNB VoltageSB Core Voltage
[Auto][Auto]
[Auto][Auto]
[Auto]
DRAM Frequency
17
1.96 V0.63Vtt1.11V1.52V
3
BIOS SETUP UTILITY
DRAM Timing Control
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM tCL [Auto]
DRAM tRCDDRAM tRPDRAM tRASDRAM tRFCDRAM tWRDRAM tWTRDRAM tRRDDRAM tRTP
[Auto][Auto][Auto][Auto][Auto][Auto][Auto][Auto]
DRAM tCLValue
Min = 3Max = 7
666
18426333
4
5
6
BIOS SETUP UTILITY
Main OC Tweaker H/W Monitor Boot Security Exit
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Advanced Settings
WARNING : Setting wrong values in below sectionsmay cause system to malfunction.
CPU Configuration
ACPI ConfigurationChipset Configuration
Storage ConfigurationPCIPnP ConfigurationFloppy ConfigurationSuperIO ConfigurationUSB Configuration
Options for CPU
BIOS Update Utility
ASRock Instant Flash
7
BIOS SETUP UTILITY
CPU Configuration This should be enabledin order to enable ordisable the “EnhancedHalt State”.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
[Enabled][Enabled][Disabled][Auto]
[Disabled]
[Disabled][Auto]
CPU Frequency (MHz)PCIE Frequency (MHz)
Overclock Mode[200][100]
[Auto]
Boot Failure GuardSpread Spectrum
[Enabled][Auto]
Ratio CMOS Setting [17]Ratio Status Unlocked (Min:12, Max:17)
Enhanced Halt State
Intel (R) SpeedStep (tm) tech.Intel (R) C-STATE techOn-Demand Clock Modulation
CPU Thermal ThrottlingNo-Execute Memory Protection
Intel (R) Virtualization tech.
17
8
®
®
® ®
9
10
BIOS SETUP UTILITY
Chipset Settings
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
Intelligent Energy SaverPrimary Graphics AdapterOnboard HD Audio
Front PanelOnBoard LanCIR10 Field 1
[Disabled][PCI][Auto][Enabled][Enabled][Enabled]
DRAM RCOMP and tRD Configuration
DRAM DLL SKEW Configuration
BIOS SETUP UTILITY
DRAM RCOMP Settings
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM CH0 RCOMP ODTValue
Min = 1Max - 63
DRAM CH0 RCOMP ODT [Auto]DRAM CH0 G0 (Data)DRAM CH0 G1 (Command)DRAM CH0 G2 (Control1)DRAM CH0 G3 (Control2)DRAM CH0 G4 (Clocks1)DRAM CH0 G5 (Clocks2)
[Auto][Auto][Auto][Auto][Auto][Auto]
DRAM CH0 RCOMP Settings : 18-0-10-7-7-7-7
DRAM CH1 RCOMP ODTDRAM CH1 G0 (Data)DRAM CH1 G1 (Command)DRAM CH1 G2 (Control1)DRAM CH1 G3 (Control2)DRAM CH1 G4 (Clocks1)DRAM CH1 G5 (Clocks2)
[Auto][Auto][Auto][Auto][Auto][Auto][Auto]
DRAM CH1 RCOMP Settings : 54-0-8-8-0-8-0
11
12
BIOS SETUP UTILITY
DRAM DLL SKEW Settings
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
DRAM CH0 CLKSET0 SKEW [Auto]
DRAM CH0 CLKSET0 SKEW Info:13-0-1-0-0-1300 Auto-350 ps-300 ps-250 ps-200 ps-150 ps-100 ps-50 psNormal
Options
DRAM CH0 CLKSET1 SKEW [Auto]
DRAM CH0 CLKSET1 SKEW Info:13-0-1-0-0-1300
DRAM CH0 CMD SKEW [Auto]
DRAM CH0 CMD SKEW Info:4-5-0-0-0-460
DRAM CH0 CTRL0 SKEW [Auto]
DRAM CH0 CTRL0 SKEW Info:4-1-0-0-0-412
DRAM CH0 CTRL1 SKEW [Auto]
DRAM CH0 CTRL1 SKEW Info:4-1-0-0-0-412
DRAM CH0 CTRL2 SKEW [Auto]
DRAM CH0 CTRL2 SKEW Info:4-1-0-0-0-412
DRAM CH0 CTRL3 SKEW [Auto]
DRAM CH0 CTRL3 SKEW Info:4-1-0-0-0-412
DRAM CH1 CLKSET0 SKEW Info:0-0-0-0-0-0
13
14
15
BIOS SETUP UTILITY
ACPI Configuration Select auto-detect ordisable the STRfeature.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Suspend To RAM
Repost Video on STR Resume
Restore on AC/Power LossRing-In Power OnPCI Devices Power OnPS / 2 Keyboard Power OnRTC Alarm Power On
ACPI HPET Table
Check Ready Bit
[Auto][No][Auto]
[Power Off][Disabled][Disabled][Disabled][Disabled]
[Disabled]
16
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
SATAII Configuration
SATAII 1SATAII 2SATAII 3SATAII 4SATAII 5SATAII 6IDE1 MasterIDE1 Slave
[Enhanced]
[Hard Disk][Not Detected][Not Detected][Not Detected][Not Detected][Not Detected][Not Detected][Not Detected]
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
Configure SATAII as [IDE]
DisabledCompatibleEnhanced
AHCI CD/DVD Boot Time out [35]
Options
OnBoard IDE Controller [Enabled]
®
®
BIOS SETUP UTILITY
Primary IDE Master Select the typeof device connectedto the system.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Type
LBA/Large ModeBlock (Multi-Sector Transfer)PIO ModeDMA ModeS . M . A . R . T .32Bit Data Transfer
[Auto]
[Auto][Auto][Auto][Auto][Disabled][Enabled]
DeviceVendorSizeLBA ModeBlock ModePIO ModeAsync DMAUltra DMAS.M.A.R.T.
:Hard Disk:ST340014A:40.0 GB:Supported:16Sectors:4:MultiWord DMA-2:Ultra DMA-5:Supported
17
18
BIOS SETUP UTILITY
Floppy Configuration Select the type offloppy driveconnected to thesystem.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
Floppy A [1.44 MB 3 "]12
BIOS SETUP UTILITY
Advanced PCI / PnP Settings Value in units of PCIclocks for PCI devicelatency timerregister.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
PCI Latency TimerPCI IDE BusMaster
[32][Enabled]
Advanced
19
BIOS SETUP UTILITY
Configure Super IO Chipset Allow BIOS to Enableor Disable FloppyController.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
OnBoard Floppy ControllerSerial Port AddressInfrared Port AddressParallel Port Address
Parallel Port ModeEPP VersionECP Mode DMA Channel
Parallel Port IRQ
[Enabled][3F8 / IRQ4][Disabled][378][ECP + EPP][1.9][DMA3][IRQ7]
20
®
BIOS SETUP UTILITY
USB Configuration To enable or disablethe onboard USBcontrollers.
Select ScreenSelect Item
+- Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Advanced
USB Controller
USB 2.0 SupportLegacy USB Support
[Enabled]
[Enabled][Enabled]
21
BIOS SETUP UTILITY
Hardware Health Event Monitoring
Select ScreenSelect Item
F1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU TemperatureM / B Temperature
CPU Fan SpeedChassis Fan SpeedPower
Vcore+ 3.30V+ 5.00V+ 12.00V
Fan Speed
: 37 C / 98 F
: 3400 RPM
: 1.629V: 3.306V: 5.067V: 11.890V
: 31 C / 87 F
: 3399 RPM: 3288 RPM
Main OC Tweaker Advanced Boot Security ExitH/W Monitor
Enable/DisableCPU Quiet FanFunction.
CPU Quiet Fan [Disabled]
22
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Security Exit
Boot SettingsConfigure Settingsduring System Boot.
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Boot
Boot Settings Configuration
1st Boot DeviceHard Disk Drives
[HDD:5M-Hitachi HDS]
BIOS SETUP UTILITY
Boot Settings ConfigurationDisabled: Displaysnormal POST messages.Enabled: Displays OEMLogo instead of POSTmessages.
Select ScreenSelect Item
+ - Change OptionF1 General HelpF9 Load DefaultsF10 Save and ExitESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot
AddOn ROM DisplayBoot Logo
Boot From Onboard LANBootup Num-Lock
[Enabled][Auto][Disabled][On]
Full Screen Logo [Enabled]
23
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Exit
Install or Change thepassword.
Select ScreenSelect Item
Enter ChangeF1 General Help
F10 Save and ExitESC Exit
F9 Load Defaults
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Security
Change Supervisor Password
Change User Password
Security Settings
Supervisor Password : Not InstalledUser Password : Not Installed
24
BIOS SETUP UTILITY
Main OC Tweaker Advanced H/W Monitor Boot Security
Exit system setupafter saving thechanges.
F10 key can be usedfor this operation.
Select ScreenSelect Item
Enter Go to Sub ScreenF1 General Help
F10 Save and ExitESC Exit
F9 Load Defaults
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
Exit
Save Changes and Exit
Discard Changes and ExitDiscard Changes
Load BIOS DefaultsLoad Performance Setup Default (IDE/SATA)Load Performance Setup AHCI ModeLoad Power Saving Setup Default
Exit Options